Synthesis of a polyurea from a glucose- or mannose-containing N -alkyl urea peptoid oligomer

Synthesis and characterization of amino-functionalized guar gum based polyurea: Preparation of iodine complexes, structural investigation and release studies

Biobased materials are expanding dramatically in various industrial applications due to their unique intrinsic properties. In this study, various chemical functionalization procedures were used to synthesize guar gum, a naturally occurring polysaccharide-based polyurea, and its iodine complexes. Firstly, guar gum was subjected to tosylation reaction using p-toluene sulphonyl chloride to introduce tosyl moieties in the polymer chain with the degree of substitution (DS) ranging between 0.16 and 1.54. Sample having the highest degree of tosyl moiety was further reacted with tris(2-aminoethyl) amine to produce 6-deoxy-6-tris(2-aminoethyl) amine derivative via nucleophilic substitution reaction to impart amino functional groups. The degree of substitution in 6-deoxy-6-tris(2-aminoethyl) amine derivative was found to be 0.59. 6-deoxy-6-tris(2-aminoethyl) amine derivative was reacted with different diisocyanates (Toluene-2,4-diisocyanate (TDI), 1,6-diisocyanatohexane (HMDI)) to produce guar gum based polyurea. Iodine complexes of the resulting polyurea were prepared by reacting with different iodinating agents. Different chemical reactions, formation of polyurea and its iodine complexes were thoroughly analyzed by different analytical techniques such as FT-IR, NMR, elemental analysis, XRD, UV-Vis spectroscopy, and a reaction scheme has been proposed. Morphological and rheological characteristics were analyzed by SEM and viscosity measurement. Thermal analysis was carried out by TGA and DSC studies. Finally, by examining the complex's UV-Vis spectra, the iodine release characteristics from polyurea‑iodine complexes were investigated.

Synthesis and Characterization of Regioselectively Functionalized Mono-Sulfated and -Phosphorylated Anionic Poly-Amido-Saccharides

Polysaccharides are abundant in nature and employed in various biomedical applications ranging from scaffolds for tissue engineering to carriers for drug delivery systems. However, drawbacks such as tedious isolation protocols, contamination, batch-to-batch consistency, and lack of compositional control with regards to stereo- and regioselectivity impede the development and utility of polysaccharides, and thus mimetics are highly sought after. We report a synthetic strategy to regioselectively functionalize poly-amido-saccharides with sulfate or phosphate groups using post-polymerization modification reactions. Orthogonally protected β-lactam monomers, synthesized from D-glucal, undergo anionic ring-opening polymerization to yield polymers with degrees of polymerization of 12, 25, and 50. Regioselective deprotection followed by functionalization and global deprotection affords the sulfated and phosphorylated poly-amido-saccharides. The resulting anionic polymers are water soluble and non-cytotoxic and adopt helical conformations. This new methodology provides access to otherwise inaccessible functional polysaccharide mimetics for biomedical applications.

Synthesis and characterization of sulfated-lactose polyurethane hydrogels

Polyurethanes (PUs) are widely used due to their durability, flexibility, and biocompatibility. PU hydrogels have been used in biomedical applications tissue engineering, synthetic extracellular matrices, and drug delivery. In this...

Sulfated poly-amido-saccharides (sulPASs) are anticoagulants in vitro and in vivo

Anticoagulant therapeutics are a mainstay of modern surgery and of clotting disorder management such as venous thrombosis, yet performance and supply limitations exist for the most widely used agent - heparin. Herein we report the first synthesis, characterization, and performance of sulfated poly-amido-saccharides (sulPASs) as heparin mimetics. sulPASs inhibit the intrinsic pathway of coagulation, specifically FXa and FXIa, as revealed by ex vivo human plasma clotting assays and serine protease inhibition assays. sulPASs activity positively correlates with molecular weight and degree of sulfation. Importantly, sulPASs are not degraded by heparanases and are non-hemolytic. In addition, their activity is reversed by protamine sulfate, unlike small molecule anticoagulants. In an in vivo murine model, sulPASs extend clotting time in a dose dependent manner with bleeding risk comparable to heparin. These findings support continued development of synthetic anticoagulants to address the clinical risks and shortages associated with heparin.

Efficiency and mechanism of adsorption of low concentration uranium in water by extracellular polymeric substances

Extracellular polymeric substances (EPS) of uranium adsorbent was first extracted from the aerobic activated sludge of municipal wastewater treatment plant as raw material. The structure and surface morphology of EPS was characterized by FTIR, SEM-EDX, 3D-EEM, and XPS. The 3D-EEM spectra of EPS revealed that there are Tryptophan-like protein and Humus which can adsorb uranium in the EPS. The results of XPS indicated that the EPS surface contained active functional groups (COOH,CONH₂,-H₂PO₄,OH,NH₂ and so on) which all react with uranium, and the C, N, O elements play an important role in the reaction. The static batch test was used to study the adsorption behavior of uranium on the EPS, and the effects of pH, dosage of EPS and initial concentration of the solution on the removal of uranium by EPS were investigated. The adsorption isotherm, thermodynamics and kinetic models were used to match the mechanism of the interaction between EPS and uranium. Batch adsorption experiments revealed that the pH value had a great influence on the adsorption effect of EPS, and the optimal solution pH for uranium adsorption was around 6.0 with the removal efficiency of uranium was about 93% in the condition of neutral. Freundlich (R² ≈ 0.997) and Langmuir (R² ≈ 0.9931) models can get a good fitting effect, indicating that the adsorption of uranium by EPS had both monolayer adsorption and multilayer adsorption. EPS and uranium were combined disorderly and ion exchange mechanism could be involved. In this study, the active groups on the surface of EPS were also involved in the chemisorption process of uranium adsorption. The maximum adsorption capacity of EPS by Langmuir fitting was 333.3 mg/g. We conclude EPS is a potential adsorbent for radionuclide treatment.

Shape memory polymer foams prepared from a heparin-inspired polyurethane/urea

Shape memory foams have been prepared using a heparin-inspired polyurea/urethane that displays excellent resistance to platelet adherence.

Heparin-Mimicking Polymers: Synthesis and Biological Applications

Heparin is a naturally occurring, highly sulfated polysaccharide that plays a critical role in a range of different biological processes. Therapeutically, it is mostly commonly used as an injectable solution as an anticoagulant for a variety of indications, although it has also been employed in other forms such as coatings on various biomedical devices. Due to the diverse functions of this polysaccharide in the body, including anticoagulation, tissue regeneration, anti-inflammation, and protein stabilization, and drawbacks of its use, analogous heparin-mimicking materials are also widely studied for therapeutic applications. This review focuses on one type of these materials, namely, synthetic heparin-mimicking polymers. Utilization of these polymers provides significant benefits compared to heparin, including enhancing therapeutic efficacy and reducing side effects as a result of fine-tuning heparin-binding motifs and other molecular characteristics. The major types of the various polymers are summarized, as well as their applications. Because development of a broader range of heparin-mimicking materials would further expand the impact of these polymers in the treatment of various diseases, future directions are also discussed.

A computational study on the thermal decomposition of di(tri)thiocarbonates

Alkyl methyl di(tri)thiocarbonates can be thermally decomposed into alkenes. In this paper, theoretical calculations were used to calculate the thermal decomposition procedures. Six compounds, including ethyl, isopropyl and [Formula: see text] dithiocarbonate and trithiocarbonate, were examined. For each decomposition, nine possible paths were considered, including the paths leading to the desired alkene products, as well as rearrangement and elimination reactions. This calculation was performed with the MP2/6-31G(d) method. Wiberg bond indices were also calculated to further reveal the reaction progress.

Applications of Gold Nanoparticles in Biosensors

Gold nanoparticles (AuNPs) as one of the most stable metal nanoparticles have demonstrated extensive applications in recent years. This paper will give a focus on the AuNPs as biosensors, due to their inertness, unique optical properties, high surface area, and various surface functionalization methods. Synthesis of AuNps and the surface functionalization will be discussed in the first part. The size, shape, and stability can be controlled by different synthetic methods, while reductant usually needed. By surface functionalization with different molecules such as polymers, nucleic acids, and proteins, AuNPs will aggregate when specified molecule linkages showing up enables selective detections. The application in biosensing to detect proteins, oligonucleotide, glucose, and heavy metals will be exemplified, followed by the summary and future perspective part in the conclusion.

The role of the KRSIK motif of human angiogenin in heparin and DNA binding

The ⁵⁰KRSIK⁵⁴ motif is the main interaction site of hAng for heparin and DNA binding, providing an insight into the potential role of the motif for the internalization and DNA binding of hAng, which is essential for the regulation of angiogenesis.

Blood compatibility of heparin-inspired, lactose containing, polyureas depends on the chemistry of the polymer backbone

Sulfated glycopolymers were synthesized from diisocyanates and lactose containing diamines. Blood compatibility assays indicated highly sulfated glycopolymers with methylene bis(4-cyclohexyl isocyanate) backbones result in prolonged clotting times.

Sequence Programmable Peptoid Polymers for Diverse Materials Applications

Polymer sequence programmability is required for the diverse structures and complex properties that are achieved by native biological polymers, but efforts towards controlling the sequence of synthetic polymers are, by comparison, still in their infancy. Traditional polymers provide robust and chemically diverse materials, but synthetic control over their monomer sequences is limited. The modular and step-wise synthesis of peptoid polymers, on the other hand, allows for precise control over the monomer sequences, affording opportunities for these chains to fold into well-defined nanostructures. Hundreds of different side chains have been incorporated into peptoid polymers using efficient reaction chemistry, allowing for a seemingly infinite variety of possible synthetically accessible polymer sequences. Combinatorial discovery techniques have allowed the identification of functional polymers within large libraries of peptoids, and newly developed theoretical modeling tools specifically adapted for peptoids enable the future design of polymers with desired functions. Work towards controlling the three-dimensional structure of peptoids, from the conformation of the amide bond to the formation of protein-like tertiary structure, has and will continue to enable the construction of tunable and innovative nanomaterials that bridge the gap between natural and synthetic polymers.

Gold Nanoparticles: Synthesis and Biological Applications

Gold nanoparticles ( AuNPs ) as one of the most stable metal nanoparticles have demonstrated extensive applications in recent years. In this review, the synthetic methods to AuNPs were discussed, which included citrate reduction, Brust–Schiffrin method, ligand-stabilized AuNPs and so on, followed with the synthetic mechanisms. Special emphasis was made on polymer modified AuNPs in biomedical applications, especially for polymer/ AuNPs conjugated in the field of cancer therapy and early diagnosis. The applications based on optoelectronic properties, which was related to surface plasmon resonance (SPR) effect, were also summarized as biosensors for labeling and detection.

Self-Assembly Technique for Biomedical Applications

Layer-by-layer (LbL) self-assembly has attracted extensive attention for its simplicity and versatility. Self-assembly has many potential applications, among which biomedical applications is especially important because it can be used as a means of generating drug delivery and biomedical materials. Based on this, most recent progress in the field of self-assembly technique for drug delivery and biomedical material applications are summarized in this mini review. The remaining challenges are also mentioned.

The dual binding site of angiogenin and its inhibition mechanism: the crystal structure of the rat angiogenin-heparin complex

The heparin complex of rat angiogenin revealed that a heparin strand is fitted into a positively charged groove formed by the dual binding site of rat angiogenin, suggesting that cell adhesion to angiogenin is facilitated by its interaction with substrates on the cell surface and can be inhibited by heparin.

Sorption of radionuclides from aqueous systems onto graphene oxide-based materials: a review

Graphene oxide-based nanomaterials are suitable materials for the preconcentration of radionuclides and heavy metal ions from aqueous solutions in environmental pollution cleanup.

Preparation and application of tubular assemblies based on amphiphilic tetramethoxyresorcinarenes

A silver nanoparticle/organic hybrid micro-tubular material was prepared by fabricating tetramethoxyresorcinarene tetraaminoamide-functionalized silver nanoparticles on templates of microtubular assemblies.

A Turn-Off Fluorescent Nanosensor for Iron in Aqueous Solution Based on Fluorescent Carbon Nanoparticles

The water-soluble fluorescent carbon nanomaterials with low toxicity and high biocompatibility are considered as promising materials for biomedical and sensor applications. Here, we report that a nanosensor system has been developed to simultaneously detect two valence states of iron ( Fe 2+ and/or Fe 3+) in aqueous solution based on fluorescent carbon nanoparticles (FCNs). The nanosensor has high selectivity and sensitivity with a limit of detection (LOD) of 5 μM, which is equivalent to 0.3 mg/L (5.36 μM) of iron in drinking water by United States Environment Protection Agency (US-EPA). Furthermore, a distinguishable color change of solution, from pale yellow to red-brown, can be observed as iron concentration reaching 40 μM, which provides way for fast, visible detection of irons.

Effects of Size and Dispersity of Microcrystalline Celluloses on Size, Structure and Stability of Nanocrystalline Celluloses Extracted by Acid Hydrolysis

Nanocrystalline celluloses (NCCs) were separated from four commercial microcrystalline celluloses (MCCs) by an acid hydrolysis–sonication treatment. Transmission electron microscopy (TEM), atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectrum, X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were conducted to investigate the NCCs. MCCs with different morphologies and particle sizes showed different aggregation degrees. The aggregation of MCCs followed the order MCC1 > MCC3 > MCC2 > MCC4, which is the same order of the heights of the resulting NCCs. The best uniformity and thermal stability were characterized for NCC3, which was produced by MCC3 with smallest original particle size and good dispersity among the four MCCs. This result suggests that both the original particle size and dispersity of MCCs had significant effects on separated NCCs.

Synthesis and anticoagulant activity of polyureas containing sulfated carbohydrates

Polyurea-based synthetic glycopolymers containing sulfated glucose, mannose, glucosamine, or lactose as pendant groups have been synthesized by step-growth polymerization of hexamethylene diisocyanate and corresponding secondary diamines. The obtained polymers were characterized by gel permeation chromatography, nuclear magnetic resonance spectroscopy, and Fourier transform infrared spectroscopy. The nonsulfated polymers showed similar results to the commercially available biomaterial polyurethane TECOFLEX in a platelet adhesion assay. The average degree of sulfation after reaction with SO₃ was calculated from elemental analysis and found to be between three and four −OSO₃ groups per saccharide. The blood-compatibility of the synthetic polymers was measured using activated partial thromboplastin time, prothrombin time, thrombin time, anti-IIa, and anti-Xa assays. Activated partial thromboplastin time, prothrombin time, and thrombin time results indicated that the mannose and lactose based polymers had the highest anticoagulant activities among all the sulfated polymers. The mechanism of action of the polymers appears to be mediated via an anti-IIa pathway rather than an anti-Xa pathway.

Theoretical studies on the pyrolysis of (Thion)carbonates

MP2/6-31G(d) was employed to investigate the theoretical calculations on the pyrolysis of alkyl methyl (thion)carbonates, where alkyl groups referred to ethyl, isopropyl and t-butyl groups. Nine possible pathways were considered for the pyrolysis of alkyl methyl thioncarbonates, while only seven possible pathways were found to pyrolyze alkyl methyl carbonates. Both of them had three pathways to generate the desired alkene products. Not only thermal elimination pathways were calculated, other possible mechanisms, such as rearrangements and nucleophilic substitutions, were also considered. The progress of the reactions was also investigated by the calculation of Wiberg bond indices at MP2/6-31G(d) level.

Development and Challenges of Nanovectors in Gene Therapy

In recent years, hundreds of genes have been linked to a variety of human diseases, and the field of gene therapy has emerged as a way to treat this wide range of diseases. The main goal of gene therapy is to find a gene delivery vehicle that can successfully target diseased cells and deliver therapeutic genes directly to their cellular compartment. The two main types of gene delivery vectors currently being investigated in clinical trials are recombinant viral vectors and synthetic nonviral vectors. Recombinant viral vectors take advantage of the evolutionarily optimized viral mechanisms to deliver genes, but they can be hard to specifically target in vivo and are also associated with serious side effects. Synthetic nonviral vectors are made out of highly biocompatible lipids or polymers, but they are much less efficient at delivering their genetic payload due to the lack of any active delivery mechanism. This mini review will introduce the current state of gene delivery in clinical trials, and discuss the specific challenges associated with each of these vectors. It will also highlight some specific gaps in knowledge that are limiting the advancement of this field and touch on the current areas of research being explored to overcome them.

A Facile Strategy for In Situ Controlled Delivery of Doxorubicin with a pH-Sensitive Injectable Hydrogel

In light of the challenges along with the traditional intravenous administration of chemotherapeutics, injectable hydrogel-drug system emerges as a powerful tool for noninvasive and in situ controlled-release of drugs. Herein, we report a novel strategy of drug delivery system with pH responsive injectable hydrogels by taking advantages of two biomaterials. The first one is a pH sensitive polymer-drug (prodrug) conjugate, poly (ethylene glycol)–doxorubicin (MPEG–DOX) with hydrazone linkage. This prodrug interacted with a second biomaterial, α-cyclodextrin (α-CD) under mild conditions and subsequently formed the hydrogels in minutes with tunable stiffness. The gels showed a sustained release behavior dependent on the surrounding pH and released drugs effectively killed tumor cells (MCF-7). The quick cell uptake and efficient intracellular delivery of DOX were observed under a confocal microscope. This study thus provides a novel and simple drug encapsulation strategy to deliver poorly soluble drugs in situ for a potential targeted chemotherapy.

Carbon Nanomaterial-Based Composites in Wastewater Purification

New techniques and materials are called for wastewater treatment due to the shortage of worldwide fresh water and the increasing water demand. As a simple and efficient method, adsorption technique has been extensively applied to remove organic and inorganic pollutants from contaminated water. The application of carbon nanomaterials, such as activated carbon, carbon nanotubes (CNTs), graphenes and their derivatives/analogues, in wastewater treatment has also been investigated due to their unique properties, such as wide availability, porous structure, large surface area, tunable morphology and nontoxicity. This review highlights the recent advances of wastewater treatment utilizing carbon nanomaterial modified composites as adsorbents. The adsorption phenomenon and its mechanism are briefly discussed. Detailed discussions are focused on the selective adsorption of carbon nanomaterial composites to unique pollutants. The remaining challenges are also mentioned.

Application of layer-by-layer coatings to tissue scaffolds – development of an angiogenic biomaterial

Development of flexible coating strategies to promote angiogenesis is critical to effectively treat chronic, non-healing wounds.