Injectable in situ gelling methylcellulose-based hydrogels for bone tissue regeneration

Injectable bone substitutes (IBSs) represent a compelling choice for bone tissue regeneration, as they can be exploited to optimally fill complex bone defects in a minimally invasive manner. In this context, in situ gelling methylcellulose (MC) hydrogels may be engineered to be free-flowing injectable solutions at room temperature and gels upon exposure to body temperature. Moreover, incorporating a suitable inorganic phase can further enhance the mechanical properties of MC hydrogels and promote mineralization, thus assisting early cell adhesion to the hydrogel and effectively guiding bone tissue regeneration. In this work, thermo-responsive IBSs were designed selecting MC as the organic matrix and calcium phosphate (CaP) or CaP modified with graphene oxide (CaPGO) as the inorganic component. The resulting biocomposites displayed a transition temperature around body temperature, preserved injectability even after loading with the inorganic components, and exhibited adequate retention on an ex vivo calf femoral bone defect model. The addition of CaP and CaPGO promoted the in vitro mineralization process already 14 days after immersion in simulated body fluid. Interestingly, combined X-ray diffraction and solid state nuclear magnetic resonance characterizations revealed that the formed biomimetic phase was constituted by crystalline hydroxyapatite and amorphous calcium phosphate. In vitro biological characterization revealed the beneficial impact of CaP and CaPGO, indicating their potential in promoting cell adhesion, proliferation and osteogenic differentiation. Remarkably, the addition of GO, which is very attractive for its bioactive properties, did not negatively affect the injectability of the hydrogel nor the mineralization process, but had a positive impact on cell growth and osteogenic differentiation on both pre-differentiated and undifferentiated cells. Overall, the proposed formulations represent potential candidates for use as IBSs for application in bone regeneration both under physiological and pathological conditions.

Injecting hope: chitosan hydrogels as bone regeneration innovators

Spontaneous bone regeneration encounters substantial restrictions in cases of bone defects, demanding external intervention to improve the repair and regeneration procedure. The field of bone tissue engineering (BTE), which embraces a range of disciplines, offers compelling replacements for conventional strategies like autografts, allografts, and xenografts. Among the diverse scaffolding materials utilized in BTE applications, hydrogels have demonstrated great promise as templates for the regeneration of bone owing to their resemblance to the innate extracellular matrix. In spite of the advancement of several biomaterials, chitosan (CS), a natural biopolymer, has garnered significant attention in recent years as a beneficial graft material for producing injectable hydrogels. Injectable hydrogels based on CS formulations provide numerous advantages, including their capacity to absorb and preserve a significant amount of water, their minimally invasive character, the existence of porous structures, and their capability to adapt accurately to irregular defects. Moreover, combining CS with other naturally derived or synthetic polymers and bioactive materials has displayed its effectiveness as a feasible substitute for traditional grafts. We aim to spotlight the composition, production, and physicochemical characteristics and practical utilization of CS-based injectable hydrogels, explicitly focusing on their potential implementations in bone regeneration. We consider this review a fundamental resource and a source of inspiration for future research attempts to pioneer the next era of tissue-engineering scaffold materials.

Injectable polyoxazoline grafted hyaluronic acid thermoresponsive hydrogels for biomedical applications

Injectable thermosensitive hydrogels based on hyaluronic acid (HA) grafted with lower critical solution temperature (LCST) polyoxazoline (copolymers of poly(isopropyl-co-butyl oxazoline)) or P(iPrOx-co-BuOx) have been elaborated with tunable solution/gel temperature transitions and gel state elastic modulus. A suitable HA-g-P(iPrOx-co-BuOx-67/33)-0.10 sample with an iPrOx/BuOx ratio of 67/33, a polymerization degree (DP) of 25, a substitution degree (DS) of 10%, and displaying thermally induced gelling character with elastic (G') and viscous (G'') moduli crossover points at 25 °C and a G' at 37 °C around 80 Pa has been chosen for medical application. Hydrogels obtained with HA-g-P(iPrOx-co-BuOx-67/33)-0.10 exhibited high stability at 37 °C and excellent injectability properties with full and quick reversibility. The incorporation of a secondary network (HA), until 35 wt%, into the thermosensitive hydrogel also demonstrated very good stability and injectability.

Preparation and optimization of agarose or polyacrylamide/amino acid-based double network hydrogels for photocontrolled drug release

The high water content and biocompatibility of amino-acid-based supramolecular hydrogels have generated growing interest in drug delivery research. Nevertheless, the existing dominant approach of constructing such hydrogels, the exploitation of a single amino acid type, typically comes with several drawbacks such as weak mechanical properties and long gelation times, hindering their applications. Here, we design a near-infrared (NIR) light-responsive double network (DN) structure, containing amino acids and different synthetic or natural polymers, i.e., polyacrylamide, poly(N-isopropylacrylamide), agarose, or low-gelling agarose. The hydrogels displayed high mechanical strength and high drug-loading capacity. Adjusting the ratio of Fmoc-Tyr-OH/Fmoc-Tyr(Bzl)-OH or Fmoc-Phe-OH/Fmoc-Tyr(Bzl)-OH, we could drastically shorten the gelation time of the DN hydrogels at room and body temperatures. Moreover, introducing photothermal agents (graphene oxide, carbon nanotubes, molybdenum disulfide nanosheets, or indocyanine green), we equipped the hydrogels with NIR responsivity. We demonstrated the light-triggered release of the drug baclofen, which is used in severe spasticity treatment. Rheology and stability tests confirmed the positive impact of the polymers on the mechanical strength of the hydrogels, while maintaining good stability under physiological conditions. Overall, our study contributed a novel hydrogel formulation with high mechanical resistance, rapid gel formation, and efficient NIR-controlled drug release, offering new opportunities for biomedical applications.

Factors That Influence Base-Catalyzed Thiol-Ene Hydrogel Synthesis

Injectable, localized drug delivery using hydrogels made from ethoxylated trimethylolpropane tri-3-mercaptopropionate (ETTMP) and poly(ethylene glycol) diacrylate (PEGDA) has shown great potential due to these hydrogels' ability to exhibit non-swelling behavior and tunable drug release properties. However, current synthesis methods in the literature suffer from poor ETTMP solubility in water, slow gelation times exceeding 20 min, and a lack of reproducibility. To address these limitations, we have developed a reliable synthesis procedure and conducted a sensitivity analysis of key variables. This has enabled us to synthesize ETTMP-PEGDA hydrogels in a polymer concentration range of 15 to 90 wt% with gelation times of less than 2 min and moduli ranging from 3.5 to 190 kPa. We overcame two synthesis limitations by identifying the impact of residual mercaptopropionic acid and alumina purification column height on gelation time and by premixing ETTMP and PEGDA to overcome low ETTMP solubility in water. Our ETTMP-PEGDA mixture can be stored at -20 °C for up to 2 months without crosslinking, allowing easy storage and shipment. These and previous results demonstrate the potential of ETTMP-PEGDA hydrogels as promising candidates for injectable, localized drug delivery with tunable drug release properties.

An injectable and 3D printable pro-chondrogenic hyaluronic acid and collagen type II composite hydrogel for the repair of articular cartilage defects

Current treatments for repairing articular cartilage defects are limited. However, pro-chondrogenic hydrogels formulated using articular cartilage matrix components (such as hyaluronic acid (HA) and collagen type II (Col II)), offer a potential solution if they could be injected into the defect via minimally invasive arthroscopic procedures, or used as bioinks to 3D print patient-specific customised regenerative scaffolds-potentially combined with cells. However, HA and Col II are difficult to incorporate into injectable/3D printable hydrogels due to poor physicochemical properties. This study aimed to overcome this by developing an articular cartilage matrix-inspired pro-chondrogenic hydrogel with improved physicochemical properties for both injectable and 3D printing (3DP) applications. To achieve this, HA was methacrylated to improve mechanical properties and mixed in a 1:1 ratio with Col I, a Col I/Col II blend or Col II. Col I possesses superior mechanical properties to Col II and so was hypothesised to enhance hydrogel mechanical properties. Rheological analysis showed that the pre-gels had viscoelastic and shear thinning properties. Subsequent physicochemical analysis of the crosslinked hydrogels showed that Col II inclusion resulted in a more swollen and softer polymer network, without affecting degradation time. While all hydrogels exhibited exemplary injectability, only the Col I-containing hydrogels had sufficient mechanical stability for 3DP applications. To facilitate 3DP of multi-layered scaffolds using methacrylated HA (MeHA)-Col I and MeHA-Col I/Col II, additional mechanical support in the form of a gelatin slurry support bath freeform reversible embedding of suspended hydrogels was utilised. Biological analysis revealed that Col II inclusion enhanced hydrogel-embedded MSC chondrogenesis, thus MeHA-Col II was selected as the optimal injectable hydrogel, and MeHA-Col I/Col II as the preferred bioink. In summary, this study demonstrates how tailoring biomaterial composition and physicochemical properties enables development of pro-chondrogenic hydrogels with potential for minimally invasive delivery to injured articular joints or 3DP of customised regenerative implants for cartilage repair.

Injectable hydrogels for cartilage and bone tissue regeneration: A review

Annually, millions of patients suffer from irreversible injury owing to the loss or failure of an organ or tissue caused by accident, aging, or disease. The combination of injectable hydrogels and the science of stem cells have emerged to address this persistent issue in society by generating minimally invasive treatments to augment tissue function. Hydrogels are composed of a cross-linked network of polymers that exhibit a high-water retention capacity, thereby mimicking the wet environment of native cells. Due to their inherent mechanical softness, hydrogels can be used as needle-injectable stem cell carrier materials to mend tissue defects. Hydrogels are made of different natural or synthetic polymers, displaying a broad portfolio of eligible properties, which include biocompatibility, low cytotoxicity, shear-thinning properties as well as tunable biological and physicochemical properties. Presently, novel ongoing developments and native-like hydrogels are increasingly being used broadly to improve the quality of life of those with disabling tissue-related diseases. The present review outlines various future and in-vitro applications of injectable hydrogel-based biomaterials, focusing on the newest ongoing developments of in-situ forming injectable hydrogels for bone and cartilage tissue engineering purposes.

Natural TEMPO oxidized cellulose nano fiber/alginate/dSECM hybrid aerogel with improved wound healing and hemostatic ability

Natural biopolymers have attracted considerable attention in a variety of biomedical applications. Herein, tempo-oxidized-cellulose nanofibers (T) were incorporated into sodium alginate/chitosan (A/C) to reinforce the physicochemical properties and further modified with decellularized skin extracellular matrix (E). A unique ACTE aerogel was successfully prepared, and its nontoxic behavior was validated using mouse fibroblast L929 cells. In vitro hemolysis results revealed excellent platelet adhesion and fibrin network formation abilities of the obtained aerogel. A high speed of homeostasis was attained based on the quick clotting in <60 s. Skin regeneration in vivo experiments were conducted using the ACT1E0 and ACT1E10 groups. In comparison to ACT1E0 samples, ACT1E10 samples demonstrated enhanced skin wound healing with increased neo-epithelialization, increased collagen deposition, and extracellular matrix remodeling. ACT1E10 was found to be a promising aerogel for skin defect regeneration due to its improved wound-healing ability.

Highly stretchable, injectable hydrogels with cyclic endurance and shape-stability in dynamic mechanical environments, by microunit reformation

Traditional injectable hydrogels have so far found it difficult to accommodate resistance to large deformation and shape-stability under cyclic deformation. Polyampholyte (PA) hydrogels exhibit resistance to large deformation, good fatigue-resistance and rapid self-healing under dynamic forces. The limitations of the preparation process result in non-injectability of polyampholyte (PA) hydrogels. Electrostatic interactions as a medium for resistance to large deformation and shape-stability after cyclic deformation in reformed injectable hydrogels has been explored in this study. The prepared hydrogels (as-prepared PA-N) were dried and smashed into microunits and then mixed with 0.9% NaCl solution to transform them into reformed hydrogels (as-reformed PA-N) via a needle to achieve injectability. The as-reformed PA-N could exhibit 913.6% elongation at break and showed shape-stability under cyclic deformation due to the efficient self-healing abilities of the microunits and the inherited structure of the prepared hydrogels, which are superior to those of current tough injectable hydrogels. Potential applications in elbow cyclic bending and frequent movement of mobile wounds have been proved in this study. Overall, the results showed that the as-reformed PA-N achieved convenient injectability with resistance to large deformation and shape-stability under cyclic deformation at the same time.

One-Step Preparation of an Injectable Hydrogel Scaffold System Capable of Sequential Dual-Growth Factor Release to Maximize Bone Regeneration

Numerous growth factors are involved in the natural bone healing process, which is precisely controlled in a time- and concentration-dependent manner. Mimicking the secretion pattern of growth factors could be an effective means to maximize the bone regeneration effect. However, achieving the sequential delivery of various growth factors without the use of multiple materials or complex scaffold designs is challenging. Herein, an injectable poly(organophosphazene) hydrogel scaffold (IPS) encapsulating bone morphogenetic protein (BMP)-2 and TGFβ-1 (IPS_BT) is studied to mimic the sequential secretion of growth factors involved in natural bone healing. The IPS_BT system is designed to release TGFβ-1 slowly while retaining BMP-2 for a longer period of time. When IPS_BT is injected in vivo, the hydrogel is replaced by bone tissue. In addition, angiogenic (CD31 and alpha-smooth muscle actin (α-SMA)) and stemness (Nanog and SOX2) markers are highly upregulated in the early stages of bone regeneration. The IPS system developed here has promising applications in tissue engineering because 1) various amounts of the growth factors can be loaded in one step, 2) the release pattern of each growth factor can be controlled via differences in their molecular interactions, and 3) the injected IPS can be degraded and replaced with regenerated bone tissue.

Dynamic Imine Bonding Facilitates Mannan Release from a Nanofibrous Peptide Hydrogel

Recently, there has been increased interest in using mannan as an immunomodulatory bioconjugate. Despite notable immunological and functional differences between the reduced (R-Man) and oxidized (O-Man) forms of mannan, little is known about the impact of mannan oxidation state on its in vivo persistence or its potential controlled release from biomaterials that may improve immunotherapeutic or prophylactic efficacy. Here, we investigate the impact of oxidation state on the in vitro and in vivo release of mannan from a biocompatible and immunostimulatory multidomain peptide hydrogel, K2(SL)6K2 (abbreviated as K2), that has been previously used for the controlled release of protein and small molecule payloads. We observed that O-Man released more slowly from K2 hydrogels in vitro than R-Man. In vivo, the clearance of O-Man from K2 hydrogels was slower than O-Man alone. We attributed the slower release rate to the formation of dynamic imine bonds between reactive aldehyde groups on O-Man and the lysine residues on K2. This imine interaction was also observed to improve K2 + O-Man hydrogel strength and shear recovery without significantly influencing secondary structure or peptide nanofiber formation. There were no observed differences in the in vivo release rates of O-Man loaded in K2, R-Man loaded in K2, and R-Man alone. These data suggest that, after subcutaneous injection, R-Man naturally persists longer in vivo than O-Man and minimally interacts with the peptide hydrogel. These results highlight a potentially critical, but previously unreported, difference in the in vivo behavior of O-Man and R-Man and demonstrate that K2 can be used to normalize the release of O-Man to that of R-Man. Further, since K2 itself is an adjuvant, a combination of O-Man and K2 could be used to enhance the immunostimulatory effects of O-Man for applications such as infectious disease vaccines and cancer immunotherapy.

Self-assembling peptides as immunomodulatory biomaterials

Self-assembling peptides are a type of biomaterial rapidly emerging in the fields of biomedicine and material sciences due to their promise in biocompatibility and effectiveness at controlled release. These self-assembling peptides can form diverse nanostructures in response to molecular interactions, making them versatile materials. Once assembled, the peptides can mimic biological functions and provide a combinatorial delivery of therapeutics such as cytokines and drugs. These self-assembling peptides are showing success in biomedical settings yet face unique challenges that must be addressed to be widely applied in the clinic. Herein, we describe self-assembling peptides' characteristics and current applications in immunomodulatory therapeutics.

Polysaccharides-Based Injectable Hydrogels: Preparation, Characteristics, and Biomedical Applications

Polysaccharides-based injectable hydrogels are a unique group of biodegradable and biocompatible materials that have shown great potential in the different biomedical fields. The biomolecules or cells can be simply blended with the hydrogel precursors with a high loading capacity by homogenous mixing. The different physical and chemical crosslinking approaches for preparing polysaccharide-based injectable hydrogels are reviewed. Additionally, the review highlights the recent work using polysaccharides-based injectable hydrogels as stimuli-responsive delivery vehicles for the controlled release of different therapeutic agents and viscoelastic matrix for cell encapsulation. Moreover, the application of polysaccharides-based injectable hydrogel in regenerative medicine as tissue scaffold and wound healing dressing is covered.

Sustained release of drug-loaded nanoparticles from injectable hydrogels enables long-term control of macrophage phenotype

Injectable hydrogels may be pre-formed through dynamic crosslinks, allowing for injection and subsequent retention in the tissue by shear-thinning and self-healing processes, respectively. These properties enable the site-specific delivery of encapsulated therapeutics; yet, the sustained release of small-molecule drugs and their cell-targeted delivery remains challenging due to their rapid diffusive release and non-specific cellular biodistribution. Herein, we develop an injectable hydrogel system composed of a macrophage-targeted nanoparticle (cyclodextrin nanoparticles, CDNPs) crosslinked by adamantane-modified hyaluronic acid (Ad-HA). The polymer-nanoparticle hydrogel uniquely leverages cyclodextrin's interaction with small molecule drugs to create a spatially discrete drug reservoir and with adamantane to yield dynamic, injectable hydrogels. Through an innovative two-step drug screening approach and examination of 45 immunomodulatory drugs with subsequent in-depth transcriptional profiling of both murine and human macrophages, we identify celastrol as a potent inhibitor of pro-inflammatory (M1-like) behavior that furthermore promotes a reparatory (M2-like) phenotype. Celastrol encapsulation within the polymer-nanoparticle hydrogels permitted shear-thinning injection and sustained release of drug-laden nanoparticles that targeted macrophages to modulate cell behavior for greater than two weeks in vitro. The modular hydrogel system is a promising approach to locally modulate cell-specific phenotype in a range of applications for immunoregenerative medicine.

Investigation of the Impact of Hydrolytically Cleavable Groups on the Stability of Poly(ethylene glycol) Based Hydrogels Cross-Linked via the Inverse Electron Demand Diels-Alder (iEDDA) Reaction

Eight-armed poly(ethylene glycol) (PEG) hydrogels cross-linked via inverse electron demand Diels-Alder reaction between norbornene and tetrazine groups are promising materials for long-term protein delivery. While a controlled release over 265 days is achieved for 15% w/v hydrogels in the previous study, the material shows high stability over 500 days despite having cleavable ester linkages between the PEG macromonomers and their functionalities. In this study, the hydrolyzable ester linkers in the PEG-norbornene precursor structure are exchanged to reduce the degradation time. To this end, 3,6-epoxy-1,2,3,6-tetrahydrophthalimide, phenyl carbamate, carbonate ester, and phenyl carbonate ester are introduced as degradable functional groups. Oscillatory shear experiments reveal that they are not affected the in situ gelation. All hydrogel types have gel points of less than 20 s even at a low polymer concentration of 5% w/v. Hydrogels with varying polymer concentrations have similar mesh sizes, all of which fell in the range of 4-12 nm. The inclusion of phenyl carbonate ester accelerates degradation considerably, with complete dissolution of 15% w/v hydrogels after 302 days of incubation in phosphate buffer (pH 7.4). Controlled release of 150 kDa fluorescein isothiocyanate-dextran over a period of at least 150 days is achieved with 15% w/v hydrogels.

Gene Regulations upon Hydrogel-Mediated Drug Delivery Systems in Skin Cancers-An Overview

The incidence of skin cancer has increased dramatically in recent years, particularly in Caucasian populations. Specifically, the metastatic melanoma is one of the most aggressive cancers and is responsible for more than 80% of skin cancer deaths around the globe. Though there are many treatment techniques, and drugs have been used to cure this belligerent skin cancer, the side effects and reduced bioavailability of drug in the targeted area makes it difficult to eradicate. In addition, cellular metabolic pathways are controlled by the skin cancer driver genes, and mutations in these genes promote tumor progression. Consequently, the MAPK (RAS-RAF-MEK-ERK pathway), WNT and PI3K signaling pathways are found to be important molecular regulators in melanoma development. Even though hydrogels have turned out to be a promising drug delivery system in skin cancer treatment, the regulations at the molecular level have not been reported. Thus, we aimed to decipher the molecular pathways of hydrogel drug delivery systems for skin cancer in this review. Special attention has been paid to the hydrogel systems that deliver drugs to regulate MAPK, PI3K-AKT-mTOR, JAK-STAT and cGAS-STING pathways. These signaling pathways can be molecular drivers of skin cancers and possible potential targets for the further research on treatment of skin cancers.

Marine Bioactive Compounds Derived from Macroalgae as New Potential Players in Drug Delivery Systems: A Review

The marine algal ecosystem is characterized by a rich ecological biodiversity and can be considered as an unexploited resource for the discovery and isolation of novel bioactive compounds. In recent years, marine macroalgae have begun to be explored for their valuable composition in bioactive compounds and opportunity to obtain different nutraceuticals. In comparison with their terrestrial counterparts, Black Sea macroalgae are potentially good sources of bioactive compounds with specific and unique biological activities, insufficiently used. Macroalgae present in different marine environments contain several biologically active metabolites, including polysaccharides, oligosaccharides, polyunsaturated fatty acids, sterols, proteins polyphenols, carotenoids, vitamins, and minerals. As a result, they have received huge interest given their promising potentialities in supporting antitumoral, antimicrobial, anti-inflammatory, immunomodulatory, antiangiogenic, antidiabetic, and neuroprotective properties. An additional advantage of ulvans, fucoidans and carrageenans is the biocompatibility and limited or no toxicity. This therapeutic potential is a great natural treasure to be exploited for the development of novel drug delivery systems in both preventive and therapeutic approaches. This overview aims to provide an insight into current knowledge focused on specific bioactive compounds, which represent each class of macroalgae e.g., ulvans, fucoidans and carrageenans, respectively, as valuable potential players in the development of innovative drug delivery systems.

dl-Polyalanine as a PEG-Free Thermogel

Thermogelling behavior of aqueous polymer solutions comes from the delicate balance between hydrophilic and hydrophobic moieties of the polymer. Typically, poly(ethylene glycol) (PEG) has been used as a hydrophilic block in most thermogels reported to date. However, recent papers have suggested the potential immunogenicity of PEG-conjugated compounds. Here, we report that aqueous solutions of dl-polyalanine (DL-PA) with a specific molecular weight can exhibit thermogelling behavior. In particular, DL-PA with a molecular weight (M_n) of 6690 Da, DL-PA67, exhibited sol-to-gel transition at the physiologically important temperature range of 30-40 °C. ¹H NMR and FTIR data indicated that the mechanism of thermogelation is related to dehydration and conformational changes of DL-PA67 from random coil to β-sheet structures. Subcutaneous injection of an aqueous DL-PA67 solution into rats confirmed the gel formation and its histocompatibility with mild tissue irritation.

Current and Future Prospective of Injectable Hydrogels-Design Challenges and Limitations

Injectable hydrogels (IHs) are smart biomaterials and are the most widely investigated and versatile technologies, which can be either implanted or inserted into living bodies with minimal invasion. Their unique features, tunable structure and stimuli-responsive biodegradation properties make these IHs promising in many biomedical applications, including tissue engineering, regenerative medicines, implants, drug/protein/gene delivery, cancer treatment, aesthetic corrections and spinal fusions. In this review, we comprehensively analyze the current development of several important types of IHs, including all those that have received FDA approval, are under clinical trials or are available commercially on the market. We also analyze the structural chemistry, synthesis, bonding, chemical/physical crosslinking and responsive release in association with current prospective research. Finally, we also review IHs' associated future prospects, hurdles, limitations and challenges in their development, fabrication, synthesis, in situ applications and regulatory affairs.

Influence of Injection Application on the Sol-Gel Phase Transition Conditions of Polysaccharide-Based Hydrogels

Polysaccharide matrices formed via thermoinduced sol-gel phase transition are promising systems used as drug carriers and minimally invasiveness scaffolds in tissue engineering. The strong shear field generated during injection may lead to changes in the conformation of polymer molecules and, consequently, affect the gelation conditions that have not been studied so far. Chitosan (CS) and hydroxypropyl cellulose (HPC) sols were injected through injection needles (14 G-25 G) or sheared directly in the rheometer measuring system. Then the sol-gel phase transition conditions were determined at 37 °C using rheometric, turbidimetric, and rheo-optical techniques. It was found that the use of low, respecting injection, shear rates accelerate the gelation, its increase extends the gelation time; applying the highest shear rates may significantly slow down (HPC) or accelerate gelation (CS) depending on thixotropic properties. From a practical point of view, the conducted research indicates that the use of thin needles without preliminary tests may lead to an extension of the gelation time and consequently the spilling of the polymeric carrier before gelation. Finally, an interpretation of the influence of an intensive shear field on the conformation of the molecules on a molecular scale was proposed.

Advances in multifunctional chitosan-based self-healing hydrogels for biomedical applications

Multifunctional self-healing hydrogels have recently attracted considerable interest in biomedical applications owing to their diverse properties, including self-healing, adhesion, conduction, antibacterial, and stimulus-response, which can meet various application requirements, ranging from wound dressings and delivery vehicles to the production of scaffolds for tissue repair and regeneration. As a natural polycationic polysaccharide with good biocompatibility, chitosan is widely used in hydrogel formation as there are many amino and hydroxyl groups along the chains that can actively participate in various physical effects and chemical reactions, which enable it to construct self-healing hydrogels and fulfill multiple functions. In this review, the formation of chitosan-based self-healing hydrogels and the related self-healing mechanism are summarized, including Schiff base, metal coordination, ionic and hydrogen bonds, hydrophobic and host-guest interactions, with a focus on the strategies for their multi-functionalization. In the last section, the applications of the chitosan-based self-healing hydrogels in the fields of wound dressings, delivery vehicles, scaffolds, and biological sensors are discussed. Overall, it is highly expected that this review could provide an insight into the prospective development of multifunctional self-healing hydrogels for biomedical applications.

A supramolecular host-guest interaction-mediated injectable hydrogel system with enhanced stability and sustained protein release

Injectable hydrogels have been studied as drug delivery systems because of their minimal invasiveness and sustained drug release properties. Pluronic F127, consisting of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers, exhibits thermo-responsive properties and hence is injectable due to its rapid sol-gel transition. Unmodified Pluronic F127-based hydrogels, however, have limited long-term stability and controllable release of drugs entrapped within them. In this study, host-guest interactions between adamantane-conjugated Pluronic F127 (F127-Ad) and polymerized β-cyclodextrin (CDP) were employed to develop a hydrogel-based protein delivery system. Single or multiple adamantane units were successfully introduced at the termini of Pluronic F127 with a 100% conversion yield, and the synthesized F127-Ad polymer produced a physically crosslinked micelle-packing structure when mixed with CDP. As the number of adamantanes at the terminal ends of Pluronic F127 increased, the critical gelation concentration of F127-Ad/CDP hydrogel decreased from 15 to 6% (w/v). The F127/CDP hydrogel was able to maintain its structure even with lower polymer content, and its injectability improved with a reduction of the hydrogel viscosity. The long-term stability of F127/CDP hydrogels was evaluated in vitro and in vivo, and it was demonstrated that the subcutaneously injected hydrogel did not disintegrate for up to 30 d. Throughout the drug release test using gelatin and insulin as model drugs, it was demonstrated that their release rates could be regulated via complexation between the protein drugs and the β-cyclodextrin molecules inside the hydrogel. In conclusion, the F127-Ad/CDP hydrogel is expected to be a versatile protein delivery system with controllable durability and drug release characteristics. STATEMENT OF SIGNIFICANCE: Pluronic F127 is one of the widely studied polymeric materials for thermo-sensitive injectable hydrogels due to its high biocompatibility and rapid sol-gel transition. Since the Pluronic F127-based hydrogel has some limitations in its long-term stability and mechanical property, it is inevitable to modify its structure for the application to drug delivery. In this study, mono- or multi- adamantane-conjugated Pluronic F127s were synthesized and mixed with β-cyclodextrin polymers to form hydrogels with host-guest interaction-mediated micelle-packing structures. The host-guest interaction introduced into the hydrogel system endowed it a sustained protein drug release behavior as well as high durability in vitro and in vivo. By increasing the number of adamantane molecules at the end of the Pluronic F127, both the stability and injectability of the hydrogel could be also modulated.

Synthesis and Characterization of New Biodegradable Injectable Thermosensitive Smart Hydrogels for 5-Fluorouracil Delivery

In this paper, injectable, thermosensitive smart hydrogel local drug delivery systems (LDDSs) releasing the model antitumour drug 5-fluorouracil (5-FU) were developed. The systems were based on biodegradable triblock copolymers synthesized via ring opening polymerization (ROP) of ε-caprolactone (CL) in the presence of poly(ethylene glycol) (PEG) and zirconium(IV) acetylacetonate (Zr(acac)₄), as co-initiator and catalyst, respectively. The structure, molecular weight (M_n) and molecular weight distribution (Đ) of the synthesized materials was studied in detail using nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC) techniques; the optimal synthesis conditions were determined. The structure corresponded well to the theoretical assumptions. The produced hydrogels demonstrated a sharp sol–gel transition at temperature close to physiological value, forming a stable gel with good mechanical properties at 37 °C. The kinetics and mechanism of in vitro 5-FU release were characterized by zero order, first order, Higuchi and Korsmeyer–Peppas mathematical models. The obtained results indicate good release control; the kinetics were generally defined as first order according to the predominant diffusion mechanism; and the total drug release time was approximately 12 h. The copolymers were considered to be biodegradable and non-toxic; the resulting hydrogels appear to be promising as short-term LDDSs, potentially useful in antitumor therapy.

Hydrogel-By-Design: Smart Delivery System for Cancer Immunotherapy

Immunotherapy has emerged as a promising strategy for cancer treatment, in which durable immune responses were generated in patients with malignant tumors. In the past decade, biomaterials have played vital roles as smart drug delivery systems for cancer immunotherapy to achieve both enhanced therapeutic benefits and reduced side effects. Hydrogels as one of the most biocompatible and versatile biomaterials have been widely applied in localized drug delivery systems due to their unique properties, such as loadable, implantable, injectable, degradable and stimulus responsible. Herein, we have briefly summarized the recent advances on hydrogel-by-design delivery systems including the design of hydrogels and their applications for delivering of immunomodulatory molecules (e.g., cytokine, adjuvant, checkpoint inhibitor, antigen), immune cells and environmental regulatory substances in cancer immunotherapy. We have also discussed the challenges and future perspectives of hydrogels in the development of cancer immunotherapy for precision medicine at the end.

Antimicrobial Peptides: A New Hope in Biomedical and Pharmaceutical Fields

Antibiotics are essential drugs used to treat pathogenic bacteria, but their prolonged use contributes to the development and spread of drug-resistant microorganisms. Antibiotic resistance is a serious challenge and has led to the need for new alternative molecules less prone to bacterial resistance. Antimicrobial peptides (AMPs) have aroused great interest as potential next-generation antibiotics, since they are bioactive small proteins, naturally produced by all living organisms, and representing the first line of defense against fungi, viruses and bacteria. AMPs are commonly classified according to their sources, which are represented by microorganisms, plants and animals, as well as to their secondary structure, their biosynthesis and their mechanism of action. They find application in different fields such as agriculture, food industry and medicine, on which we focused our attention in this review. Particularly, we examined AMP potential applicability in wound healing, skin infections and metabolic syndrome, considering their ability to act as potential Angiotensin-Converting Enzyme I and pancreatic lipase inhibitory peptides as well as antioxidant peptides. Moreover, we argued about the pharmacokinetic and pharmacodynamic approaches to develop new antibiotics, the drug development strategies and the formulation approaches which need to be taken into account in developing clinically suitable AMP applications.

Challenges in the Fabrication of Biodegradable and Implantable Optical Fibers for Biomedical Applications

The limited penetration depth of visible light in biological tissues has encouraged researchers to develop novel implantable light-guiding devices. Optical fibers and waveguides that are made from biocompatible and biodegradable materials offer a straightforward but effective approach to overcome this issue. In the last decade, various optically transparent biomaterials, as well as different fabrication techniques, have been investigated for this purpose, and in view of obtaining fully fledged optical fibers. This article reviews the state-of-the-art in the development of biocompatible and biodegradable optical fibers. Whilst several reviews that focus on the chemical properties of the biomaterials from which these optical waveguides can be made have been published, a systematic review about the actual optical fibers made from these materials and the different fabrication processes is not available yet. This prompted us to investigate the essential properties of these biomaterials, in view of fabricating optical fibers, and in particular to look into the issues related to fabrication techniques, and also to discuss the challenges in the use and operation of these optical fibers. We close our review with a summary and an outline of the applications that may benefit from these novel optical waveguides.

Engineered nanocellulose-based hydrogels for smart drug delivery applications

Nanocellulose is a promising "green" nanomaterial that has recently gained scientific interest because of its excellent characteristics, such as less risks of toxicity, biocompatibility, biodegradability, recyclability, and tunable surface features. Initially, three nanocellulose types (i.e., bacterial nanocellulose, nanocrystals, and nanofibers) and their potential biotechnological production routes have been discussed in detail. Contemporary studies are discussed in the development of nanocellulose aerogels, responsive hydrogels, injectable hydrogels/implants, and magnetic nanocellulose. Moreover, the development of hydrogels and potential crosslinking agents for the induction of desired properties has been described. Studies have revealed that the release kinetics of nanocellulosic gels/hydrogels varies from few minutes to several days depending on the given physicochemical conditions. However, such systems provide sustained drug release properties, so they are considered "smart" systems. Recent studies on controlled drug delivery systems have demonstrated their considerable potential for the next-generation transport of therapeutic drugs to target sites via various administration routes. This review presents the selection of appropriate sources and processing methodologies for the development of target nanocellulose types. It explains the potential challenges and opportunities and recommends future research directions about the smart delivery of therapeutic drugs.

Significance of Crosslinking Approaches in the Development of Next Generation Hydrogels for Corneal Tissue Engineering

Medical conditions such as trachoma, keratoconus and Fuchs endothelial dystrophy can damage the cornea, leading to visual deterioration and blindness and necessitating a cornea transplant. Due to the shortage of donor corneas, hydrogels have been investigated as potential corneal replacements. A key factor that influences the physical and biochemical properties of these hydrogels is how they are crosslinked. In this paper, an overview is provided of different crosslinking techniques and crosslinking chemical additives that have been applied to hydrogels for the purposes of corneal tissue engineering, drug delivery or corneal repair. Factors that influence the success of a crosslinker are considered that include material composition, dosage, fabrication method, immunogenicity and toxicity. Different crosslinking techniques that have been used to develop injectable hydrogels for corneal regeneration are summarized. The limitations and future prospects of crosslinking strategies for use in corneal tissue engineering are discussed. It is demonstrated that the choice of crosslinking technique has a significant influence on the biocompatibility, mechanical properties and chemical structure of hydrogels that may be suitable for corneal tissue engineering and regenerative applications.

Recent Advances in Injectable Hydrogels for Controlled and Local Drug Delivery

Injectable hydrogels have received considerable interest in the biomedical field due to their potential applications in minimally invasive local drug delivery, more precise implantation, and site-specific drug delivery into poorly reachable tissue sites and into interface tissues, where wound healing takes a long time. Injectable hydrogels, such as in situ forming and/or shear-thinning hydrogels, can be generated using chemically and/or physically crosslinked hydrogels. Yet, for controlled and local drug delivery applications, the ideal injectable hydrogel should be able to provide controlled and sustained release of drug molecules to the target site when needed and should limit nonspecific drug molecule distribution in healthy tissues. Thus, such hydrogels should sense the environmental changes that arise in disease states and be able to release the optimal amount of drug over the necessary time period to the target region. To address this, researchers have designed stimuli-responsive injectable hydrogels. Stimuli-responsive hydrogels change their shape or volume when they sense environmental stimuli, e.g., pH, temperature, light, electrical signals, or enzymatic changes, and deliver an optimal concentration of drugs to the target site without affecting healthy tissues.

3D-printed bioactive and biodegradable hydrogel scaffolds of alginate/gelatin/cellulose nanocrystals for tissue engineering

The 3D-printed hybrid biodegradable hydrogels composed of alginate, gelatin, and cellulose nanocrystals (CNCs) were prepared to provide a favorable environment for cell proliferation, adhesion, nutrients exchange, and matrix mineralization for bone tissue engineering (BTE) applications. The hybrid scaffolds exhibited enhanced mechanical strength compared to the pure polymer scaffolds. The biocompatibility, differentiation potential, and bone regeneration potential of the printed scaffolds were evaluated by DAPI staining, live-dead assay, alizarin Red-S (ARS) staining, real-time PCR (qRT-PCR), and μCT analysis, respectively. Enhanced cell proliferation has occurred 1% CNC/Alg/Gel scaffolds compared to the control. The cells were adequately adhered to the scaffold and exhibited the flattened structure. Improved mineralization was observed in the 1% CNC/Alg/Gel scaffolds' presence than the control, showing their mineralization efficiency. A significant enhancement in the expression of osteogenic-specific gene markers (Runx2, ALP, BMP-2, OCN, OPN, BSP, and COL1) has occurred with 1% CNC/Alg/Gel than the control, indicating their osteogenic potential. Furthermore, enhanced bone formation was observed in the scaffolds treated groups than the control in the calvaria critical-sized defects (CCD-1) model, suggesting their improved bone regeneration potential. Therefore, the fabricated scaffolds have the potential to explore as a biomaterial for tissue engineering.

Tuning the softness of poly(2-hydroxyethyl methacrylate) nanocomposite hydrogels through the addition of PEG coated nanoparticles

HYPOTHESIS

In nanocomposites, several factors govern the enhancement of properties when a nanofiller is added into a polymer matrix. Previously, our group have demonstrated that stabilizing nanoparticles improves the dispersion of nanoparticles in a hydrogel, but their effect on viscoelastic properties remain unclear. We hypothesized that coating the nanoparticles will block matrix-nanoparticle interactions, which would then affect the transfer of stress when the hydrogel is subjected to stress.

EXPERIMENT

To this end, we investigated the effects that nanofillers coated with polyethylene glycol (PEG) of variable molar mass have on the properties of physical hydrogels made from poly(2-hydroxyethyl methacrylate). PEG with molar masses of 6, 20, and 35 kDa were used at different concentrations and the viscoelastic properties of the resulting hydrogels were studied and compared with control hydrogels with and without nanofillers.

FINDINGS

The coated nanofiller resulted in enhanced dispersion stabilization as the molar mass and concentration of the PEG increased. However, there were noticeable changes in viscoelastic properties. In general, the nanocomposite hydrogels exhibited reduced shear modulus, greater creep, and more accentuated shear thinning behaviour. These effects were attributed to hindered matrix-nanoparticle interactions because of the PEG coating, an increased slippage of the PHEMA chains as well as a plasticizing effect.

Dual-crosslinked hyaluronan hydrogels with rapid gelation and high injectability for stem cell protection

Injectable dynamic hydrogels play a key role in cell transplantation to protect the cells from shear stress during injection. However, it still remains challenging to design dynamic hydrogels with fast gelation and high stability for protecting cells under flow due to the slow formation and exchange of most dynamic bonds. Here, a novel dual-crosslinked hydrogel system with fast dynamic crosslinks is developed by using methacrylate chitosan (CHMA) and aldehyde functionalized hyaluronate (oxidized HA, OHA). Based on the cooperation of electrostatic interaction between cationic amino of chitosan and anionic carboxyl of HA and Schiff-based crosslinking through amino and aldehyde groups, the dynamic CHMA-OHA hydrogel shows rapid gelation and high injectability. Further, the CHMA-OHA hydrogel is photopolymerized for achieving a high modulus and stability. Importantly, such hydrogels loaded with stem cells remains a cell viability (~ 92%) after extrusion. These results indicate that the CHMA-OHA hydrogel is a promising tissue engineering biomaterial for therapeutic cell delivery and 3D printing of encapsulated cell scaffolds.

Injectable in-situ gel depot system for targeted delivery of biologics to the retina

In current clinical settings, frequent intravitreal (IVT) injections of anti-vascular endothelial growth factors are used due to their short in-vivo half-life and rapid clearance from the back of the eye. The IVT injections are associated with pain, risk of infection, retinal detachment, and financial burden. Biologics molecules can undergo physical, chemical, and enzymatic degradation during formulation development and in the biological environment. Moreover, the complex ocular structures also act as a rate-limiting barrier for these biologics. Thus, delivering stable and clinically relevant biologics concentration to the back of the eye is still a challenge. Compare to other drug delivery platforms, injectable in-situ gelling depot systems (IISGDs) have emerged as an effective system for biologics delivery. In this review, we have discussed various biologics used in ocular therapeutics and their associated challenges. Different routes of delivery and associated tissue barriers are also discussed. Different types of IISGDs developed to date for biologics delivery to the back of the eye were also covered. To conclude, various critical parameters related to the formulation development process and injectable depot systems that need careful consideration and further investigations were highlighted.

Smart Hydrogels - Synthetic Stimuli-Responsive Antitumor Drug Release Systems

Among modern drug formulations, stimuli-responsive hydrogels also called "smart hydrogels" deserve a special attention. The basic feature of this system is the ability to change their mechanical properties, swelling ability, hydrophilicity, bioactive molecules permeability, etc., influenced by various stimuli, such as temperature, pH, electromagnetic radiation, magnetic field and biological factors. Therefore, stimuli-responsive matrices can be potentially used in tissue engineering, cell cultures and technology of innovative drug delivery systems (DDSs), releasing the active substances under the control of internal or external stimuli. Moreover, smart hydrogels can be used as injectable DDSs, due to gel-sol transition connected with in situ cross-linking process. Innovative smart hydrogel DDSs can be utilized as matrices for targeted therapy, which enhances the effectiveness of tumor chemotherapy and subsequently limits systemic toxicity. External stimulus sensitivity allows remote control over the drug release profile and gel formation. On the other hand, internal factors provide drg accumulation in tumor tissue and reduce the concentration of active drug form in healthy tissue. In this report, we summarise the basic knowledge and chemical strategies for the synthetic smart hydrogel DDSs applied in antitumor therapy.

Injectable Gelatin Microgel-Based Composite Ink for 3D Bioprinting in Air

Injectable hydrogels have attracted much attention in tissue engineering and regenerative medicine for their capability to replace implantation surgeries with a minimally invasive injection procedure and ability to fill irregular defects. The proposed composite ink is a gelatin microgel-based yield-stress and shear-thinning composite material that is injectable and solidifies quickly after injection at room temperature, which can be utilized for the creation of three-dimensional parts in air directly. The gelatin composite ink consists of a microgel solid phase (gelled gelatin microgels) and a cross-linkable solution phase (gelatin solution-based acellular or cellular suspension). The gelatin composite ink can be injected or printed directly in air and solidifies as physical cross-linking to hold printed structures at room temperature. The fabricated part further undergoes a chemical cross-linking process when immersed in a transglutaminase solution to enzymatically gel the gelatin solution, making a physiologically stable construct as needed. Lattice, tube-shaped, cup-shaped, and human anatomical (ear and nose) structures are printed to demonstrate the feasibility of the proposed composite ink for printing applications. The morphology and metabolic activity of cells cultured in the gelatin composite ink are further analyzed to confirm the suitability of the proposed composite ink to provide a beneficial physiological environment for bioprinting needs.

The electrostimulation and scar inhibition effect of chitosan/oxidized hydroxyethyl cellulose/reduced graphene oxide/asiaticoside liposome based hydrogel on peripheral nerve regeneration in vitro

The application of hollow nerve conduits in the repair of peripheral nerve defects is effected by inferior recovery, and nerve extension is hampered by the scar tissue generated during the repair process. In this study, the filler in hollow nerve conduit, chitosan/oxidized hydroxyethyl cellulose (CS/OHEC) hydrogel loaded asiaticoside liposome and the conductive reduced graphene oxide (rGO) were developed and used to reform the microenvironment for peripheral nerve regeneration. The physiochemical properties of CS/OHEC/rGO/asiaticoside liposome hydrogel were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and compressive modulus, porosity, swelling ratio, degradation and conductivity. In addition, the asiaticoside release profiles in vitro were investigated. The hydrogel had a continuous porous network structure with pore size distribution in the range of 50-250 μm. The majority of the hydrogels had porosities above 70%, and a compressive modulus of 0.45 MPa. The weight loss rate of hydrogel reached 76.14 ± 4.45% within 8 weeks. The conductivity of the hydrogel was 5.27 ± 0.42 × 10^-4 S/cm. The hydrogel was non-toxic and suitable for adhesion and proliferation of nerve cells in vitro. In addition, the application of electrical stimulation after the addition of rGO can promote the differentiation and proliferation of nerve cells, accelerating nerve regeneration. The asiaticoside released from the hydrogel had a significant inhibitory effect on the growth and collagen secretion of fibroblasts, eliminating scars for regenerative nerves, which can promote the function recovery of defected peripheral nerve. Together, these positive results indicate that the hydrogel would be a promising candidate for peripheral nerve regeneration.

Low Molecular Weight Supramolecular Hydrogels for Sustained and Localized In Vivo Drug Delivery

Supramolecular hydrogels are emerging as next-generation alternatives to synthetic polymers for drug delivery applications. Self-assembling peptides are a promising class of supramolecular gelator for in vivo drug delivery that have been slow to be adopted despite advantages in biocompatibility due to the relatively high cost of producing synthetic peptide hydrogels compared to synthetic polymer gels. Herein we describe the development and use of inexpensive low molecular weight cationic derivatives of phenylalanine (Phe) as injectable hydrogels for in vivo delivery of an anti-inflammatory drug, diclofenac, for pain mitigation in a mouse model. N-Fluorenylmethoxycarbonyl phenylalanine (Fmoc-Phe) derivatives were modified at the carboxylic acid with diaminopropane (DAP) to provide Fmoc-Phe-DAP molecules that spontaneously and rapidly self-assemble in aqueous solutions upon addition of physiologically relevant sodium chloride concentrations to give hydrogels. When self-assembly occurs in the presence of diclofenac, the drug molecule is efficiently encapsulated within the hydrogel network. These hydrogels exhibit robust shear-thinning behavior, mechanical stability, and drug release profiles to enable application as injectable hydrogels for in vivo drug delivery. Delivery of diclofenac in vivo was demonstrated by a localized injection of an Fmoc-F⁵-Phe-DAP/diclofenac hydrogel into the ankle joint of mice with induced ankle injury and associated inflammation-induced pain. Remediation of pain in the ankle joint was observed immediately after initial injection and was sustained for a period of nearly two weeks while diclofenac controls remediated pain for less than one day. This data demonstrates the promise of these supramolecular hydrogels as inexpensive next-generation materials for sustained and localized drug delivery in vivo.

Low Molecular Weight Gelators Based on Functionalized l-Dopa Promote Organogels Formation

We prepared the small pseudopeptide Lau-l-Dopa(OBn)2-d-Oxd-OBn (Lau = lauric acid; l-Dopa = l-3,4-dihydroxyphenylalanine; d-Oxd = (4R,5S)-4-methyl-5-carboxyl-oxazolidin-2-one; Bn = benzyl) through a number of coupling reactions between lauric acid, protected l-Dopa and d-Oxd with an excellent overall yield. The ability of the product to form supramolecular organogels has been tested with different organic solvents of increasing polarity and compared with the results obtained with the small pseudopeptide Fmoc-l-Dopa(OBn)2-d-Oxd-OBn. The mechanical and rheological properties of the organogels demonstrated solvent-dependent properties, with a storage modulus of 82 kPa for the ethanol organogel. Finally, to have a preliminary test of the organogels' ability to adsorb pollutants, we treated a sample of the ethanol organogel with an aqueous solution of Rhodamine B (RhB) for 24 h. The water solution slowly lost its pink color, which became trapped in the organogel.