Insecticidal and fungicidal activity of new synthesized chitosan derivatives

Chitosan-based insecticide formulations for insect pest control management: A review of current trends and challenges

Future agricultural practices necessitate green alternatives to replace hazardous insecticides while distinguishing between pests and beneficial insects. Chitosan, as a biological macromolecule derived from chitin, is biodegradable and exhibits low toxicity to non-target organisms, making it a sustainable alternative to synthetic pesticides. This review identifies chitosan-derivatives for insecticidal activity and highlights its efficacy including genotoxicity, defense mechanism, and disruption of insect's exoskeleton at different concentrations against several insect pests. Similarly, synergistic effects of chitosan in combination with natural extracts, essential oils, and plant-derived compounds, enhances insecticidal action against various pests was evaluated. The chitosan-based insecticide formulations (CHIF) in the form of emulsions, microcapsules, and nanoparticles showed efficient insecticide action on the targeted pests with less environmental impact. The current challenges associated with the field-trial application were also recognized, by optimizing potent CHIF-formulation parameters, scaling-up process, and regulatory hurdles addressed alongside potential solutions. These findings will provide insight into achieving the EU mission of reducing chemical pesticides by 50 %.

Synthesis and unambiguous NMR characterization of linear and branched N-alkyl chitosan derivatives

Chitosan, sourced from abundant chitin-rich waste streams, emerges as a promising candidate in the realm of future functional materials and chemicals. While showing numerous advantageous properties, chitosan sometimes falls short of competing with today's non-renewable alternatives. Chemical derivatization, particularly through N-alkylation, proves promising in enhancing hydrophobic functionalities. This study synthesizes fifteen chitosan derivatives (degree of substitution = 2-10 %) using an improved reductive amination method. Next, selective depolymerization through acid hydrolysis reduced the chain rigidity imposed by the polymer backbone. This facilitated unambiguous structural characterization of the synthesized compounds using a combination of common NMR techniques. Two potential side reactions are identified for the first time, emphasizing the need for detailed structural information to unlock the true potential of these derivatives in future applications. HYPOTHESIS: The increase in chain mobility induced by the selective depolymerization of aliphatic N-alkyl chitosan derivatives allows for an unambiguous NMR characterization.

Surface adsorption and corrosion resistance performance of modified chitosan: Gravimetric, electrochemical, and computational studies

Two novel chitosan derivatives (water soluble and acid soluble) modified with thiocarbohydrazide were produced by a quick and easy technique using formaldehyde as links. The novel compounds were synthesized and then characterized by thermogravimetric analysis, elemental analysis, nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and differential scanning calorimetry. Their surface morphologies were examined using scanning electron microscopy. These chitosan derivatives could produce pH-dependent gels. The behavior of mild steel in 5 % acetic acid, including both inhibitors at various concentrations, was investigated using gravimetric and electrochemical experiments. According to the early findings, both compounds (TCFACN and TCFWCN) functioned as mixed-type metal corrosion inhibitors. Both inhibitors showed their best corrosion inhibition efficiency at 80 mg L-1. TCFACN and TCFWCN, showed approximately 92 % and 94 % corrosion inhibition, respectively, at an optimal concentration of 80 mg L-1, according to electrochemical analysis. In the corrosion test, the water contact angle of the polished MS sample at 87.90 °C was reduced to 51 °C. The water contact angles for MS inhibited by TCFACN and TCFWCN in the same electrolyte were greater, measuring 78.10 °C and 93.10 °C, respectively. The theoretical results also support the experimental findings.

Chitosan as a Control Tool for Insect Pest Management: A Review

Chitosan, a polysaccharide derived from the deacetylation of chitin, is a versatile and eco-friendly biopolymer with several applications. Chitosan is recognized for its biodegradability, biocompatibility, and non-toxicity, beyond its antimicrobial, antioxidant, and antitumoral activities. Thanks to its properties, chitosan is used in many fields including medicine, pharmacy, cosmetics, textile, nutrition, and agriculture. This review focuses on chitosan's role as a tool in insect pest control, particularly for agriculture, foodstuff, and public health pests. Different formulations, including plain chitosan, chitosan coating, chitosan with nematodes, chitosan's modifications, and chitosan nanoparticles, are explored. Biological assays using these formulations highlighted the use of chitosan-essential oil nanoparticles as an effective tool for pest control, due to their enhanced mobility and essential oils' prolonged release over time. Chitosan's derivatives with alkyl, benzyl, and acyl groups showed good activity against insect pests due to improved solubility and enhanced activity compared to plain chitosan. Thus, the purpose of this review is to provide the reader with updated information concerning the use and potential applications of chitosan formulations as pest control tools.

Are Basic Substances a Key to Sustainable Pest and Disease Management in Agriculture? An Open Field Perspective

Pathogens and pests constantly challenge food security and safety worldwide. The use of plant protection products to manage them raises concerns related to human health, the environment, and economic costs. Basic substances are active, non-toxic compounds that are not predominantly used as plant protection products but hold potential in crop protection. Basic substances' attention is rising due to their safety and cost-effectiveness. However, data on their protection levels in crop protection strategies are lacking. In this review, we critically analyzed the literature concerning the field application of known and potential basic substances for managing diseases and pests, investigating their efficacy and potential integration into plant protection programs. Case studies related to grapevine, potato, and fruit protection from pre- and post-harvest diseases and pests were considered. In specific cases, basic substances and chitosan in particular, could complement or even substitute plant protection products, either chemicals or biologicals, but their efficacy varied greatly according to various factors, including the origin of the substance, the crop, the pathogen or pest, and the timing and method of application. Therefore, a careful evaluation of the field application is needed to promote the successful use of basic substances in sustainable pest management strategies in specific contexts.

Chitosan-induced biotic stress tolerance and crosstalk with phytohormones, antioxidants, and other signalling molecules

Several polysaccharides augment plant growth and productivity and galvanise defence against pathogens. Such elicitors have ecological superiority over traditional growth regulators, considering their amplified biocompatibility, biodegradability, bioactivity, non-toxicity, ubiquity, and inexpensiveness. Chitosan is a chitin-derived polysaccharide that has recently been spotlighted among plant scientists. Chitosan supports plant growth and development and protects against microbial entities such as fungi, bacteria, viruses, nematodes, and insects. In this review, we discuss the current knowledge of chitosan's antimicrobial and insecticidal potential with recent updates. These effects are further explored with the possibilities of chitosan's active correspondence with phytohormones such as jasmonic acid (JA), salicylic acid (SA), indole acetic acid (IAA), abscisic acid (ABA), and gibberellic acid (GA). The stress-induced redox shift in cellular organelles could be substantiated by the intricate participation of chitosan with reactive oxygen species (ROS) and antioxidant metabolism, including hydrogen peroxide (H2O2), superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD). Furthermore, we propose how chitosan could be intertwined with cellular signalling through Ca2+, ROS, nitric oxide (NO), transcription factors (TFs), and defensive gene activation.

Reduced Chitosan as a Strategy for Removing Copper Ions from Water

Toxic heavy metals are priority pollutants in wastewater, commonly present in dangerous concentrations in many places across the globe. Although in trace quantities copper is a heavy metal essential to human life, in excess it causes various diseases, whereby its removal from wastewater is a necessity. Among several reported materials, chitosan is a highly abundant, non-toxic, low-cost, biodegradable polymer, comprising free hydroxyl and amino groups, that has been directly applied as an adsorbent or chemically modified to increase its performance. Taking this into account, reduced chitosan derivatives (RCDs 1-4) were synthesised by chitosan modification with salicylaldehyde, followed by imine reduction, characterised by RMN, FTIR-ATR, TGA and SEM, and used to adsorb Cu(II) from water. A reduced chitosan (RCD3), with a moderate modification percentage (43%) and a high imine reduction percentage (98%), proved to be more efficient than the remainder RCDs and even chitosan, especially at low concentrations under the best adsorption conditions (pH 4, R_S/L = 2.5 mg mL^-1). RCD3 adsorption data were better described by the Langmuir-Freundlich isotherm and the pseudo-second-order kinetic models. The interaction mechanism was assessed by molecular dynamics simulations, showing that RCDs favour Cu(II) capture from water compared to chitosan, due to a greater Cu(II) interaction with the oxygen of the glucosamine ring and the neighbouring hydroxyl groups.

Chitosan as a potential natural compound to manage plant diseases

The necessity for non-chemical approaches has grown as awareness of the dangers posed by pesticides has spread. Chitosan, due to its biocompatibility, biodegradability, and bioactivity is one the effective choice in phytopathology. Chitosan is a biopolymer that reduces plant diseases through two main mechanisms: (1) Direct antimicrobial function against pathogens, including plasma membrane damage mechanisms, interactions with DNA and RNA (electrostatic interactions), metal chelating capacity, and deposition onto the microbial surface, (2) Induction of plant defense responses resulting from downstream signalling, transcription factor activation, gene transcription and finally cellular activation after recognition and binding of chitin and chitosan by cell surface receptors. This biopolymer have potential with capability to combating fungi, bacteria, and viruses phythopathogens. Chitosan is synthesized by deacetylating chitin. The degree of deacetylation and molecular weight of chitosan are variable and have been mentioned as important structural parameters in chitosan's biological properties. Chitosan with a higher degree of deacetylation (>70 %) has better biological properties. Many crops able to withstand pre- and post-harvest illnesses better after receiving chitosan as a seed treatment, soil amendment, or foliar spray. This review discussed the properties and use of chitosan and focuses on its application as a plant resistance inducer against pathogens.

Use of Chitosan and Other Natural Compounds Alone or in Different Strategies with Copper Hydroxide for Control of Grapevine Downy Mildew

Grapevine downy mildew (GDM) is one of the most serious diseases of grapevines. Limitations to the use of copper-based products in organic agriculture according to the European Union (EU) regulation EU/2002/473 and the later EU Commission implementing regulation 2018/1981 have promoted a search for alternatives. This 5-year field trial evaluated the effectiveness of several strategies against GDM using different chitosan-based formulations and application rates in comparison with other natural compounds applied individually or with copper hydroxide. Trials were performed in commercial vineyards with different environmental conditions and grapevine cultivars. For the natural compounds applied as individual treatments, a 0.5%/0.8% chitosan formulation provided the best protection against GDM; the other compounds and formulations were less effective. When copper hydroxide use was halved by combining it with the natural compounds according to three different strategies, the GDM incidence, severity, and McKinney index were reduced, particularly for copper hydroxide applied in combination with the 0.5%/0.8% chitosan formulation. The 0.5%/0.8% chitosan formulation alone and with copper hydroxide provided good protection against GDM during both high-pressure and low-pressure disease seasons. Therefore, chitosan represents a good alternative to copper formulations for the control of GDM and both organic and integrated disease management.

Binary Graft of Poly(N-vinylcaprolactam) and Poly(acrylic acid) onto Chitosan Hydrogels Using Ionizing Radiation for the Retention and Controlled Release of Therapeutic Compounds

In this study, we carried out the synthesis of a thermo- and pH-sensitive binary graft, based on N-vinylcaprolactam (NVCL) and pH sensitive acrylic acid (AAc) monomers, onto chitosan gels (net-CS) by ionizing radiation. Pre-oxidative irradiation and direct methods were examined, and materials obtained were characterized by FTIR-ATR, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and swelling tests (equilibrium swelling time, critical pH, and temperature). The best synthesis radiation method was the direct method, which resulted in the maximum grafting percentages (~40%) at low doses (10–12 kGy). The main goal of this study was the comparison of the swelling behavior and physicochemical properties of net-CS with those of the binary system (net-CS)-g-NVCL/AAc with the optimum grafting percentage (~30%). This produced a material that showed an upper critical solution temperature (UCST) of 33.5 °C and a critical pH value of 3.8, indicating the system is more hydrophilic at higher temperatures and low pH values. Load and release studies were carried out using diclofenac. The grafted system (32%) was able to load 19.3 mg g⁻¹ of diclofenac and release about 95% within 200 min, in comparison to net-CS, which only released 80% during the same period. When the grafted system was protonated before diclofenac loading, it loaded 27.6 mg g⁻¹. However, the drug was strongly retained in the material by electrostatic interactions and only released about 20%.

Structure and antimicrobial comparison between N-(benzyl) chitosan derivatives and N-(benzyl) chitosan tripolyphosphate nanoparticles against bacteria, fungi, and yeast

Chitosan (Ch) was reacted with seven benzaldehyde analogs separately through reductive amination in which the corresponding imines were formed and followed by reduction to produce N-(benzyl) chitosan (NBCh) derivatives. ¹H NMR spectroscopy was used to characterize the products. The nanoparticles (NPs) of Ch and NBCh derivatives were prepared according to the ionotropic gelation mechanism between Ch products and sodium tripolyphosphate, followed by high-energy ultrasonication. Scanning electron microscopy, particle size, polydispersity index, and zeta potential were applied for the NPs examination. The particle size was ranged from 235.17 to 686.90 nm and narrow size distribution (PDI <1). The zeta potential of NPs was varied between -1.26 and -27.50 mV. The antimicrobial activity was evaluated against bacteria (Erwinia carotovora subsp. atroseptica, Erwinia carotovora subsp. carotovora, and Ralstonia solanacearum), fungi (Aspergillus flavus and Aspergillus niger), and yeast (Candida albicans). The action of NBCh derivatives was significantly higher than Ch. The NPs had considerably higher than the Ch and NBCh derivatives. The activity was directly proportional to the chemical derivatization of Ch and the zeta potential of the NPs. The antimicrobial efficacy of these derivatives formulated in a greener approach could become an alternative to using traditional antimicrobial applications in an environmentally friendly manner.

Design of Chitosan Sterilization Agents by a Structure Combination Strategy and Their Potential Application in Crop Protection

Chitosan is the only cationic polysaccharide in nature. It is a type of renewable resource and is abundant. It has good biocompatibility, biodegradability and biological activity. The amino and hydroxyl groups in its molecules can be modified, which enables chitosan to contain a variety of functional groups, giving it a variety of properties. In recent years, researchers have used different strategies to synthesize a variety of chitosan derivatives with novel structure and unique activity. Structure combination is one of the main strategies. Therefore, we will evaluate the synthesis and agricultural antimicrobial applications of the active chitosan derivatives structure combinations, which have not been well-summarized. In addition, the advantages, challenges and developmental prospects of agricultural antimicrobial chitosan derivatives will be discussed.

Antimicrobial Actions and Applications of Chitosan

Chitosan is a naturally originating product that can be applied in many areas due to its biocompatibility, biodegradability, and nontoxic properties. The broad-spectrum antimicrobial activity of chitosan offers great commercial potential for this product. Nevertheless, the antimicrobial activity of chitosan varies, because this activity is associated with its physicochemical characteristics and depends on the type of microorganism. In this review article, the fundamental properties, modes of antimicrobial action, and antimicrobial effects-related factors of chitosan are discussed. We further summarize how microorganisms genetically respond to chitosan. Finally, applications of chitosan-based biomaterials, such as nanoparticles and films, in combination with current clinical antibiotics or antifungal drugs, are also addressed.

Effect of chitosan on adult longevity when fed, in no-choice experiments, to Musca domestica L., Tabanus nigrovittatus Macquart, and Phormia regina (Meigen) adults and its consumption in adult Musca domestica L

BACKGROUND

The literature reports that more research needs to be done on using chitosan as an environmentally friendly bioinsecticide, especially against dipterans. Thus, we examined the effect of chitosan when fed, in no-choice experiments, to adult Musca domestica, Tabanus nigrovittatus, and Phormia regina.

RESULTS

A 2% chitosan solution was fed, in no-choice experiments, to adults of Musca domestica, Tabanus nigrovittatus, and Phormia regina to study the effects on survivorship. In all species, the uptake of chitosan caused a significant decrease in survivorship. Examination of the digestive tract of house flies showed a thick material within the midgut, plus a shriveling of the midgut only in chitosan-treated flies. A survivorship curve of adult house flies fed a 10% sucrose and 2% w/v ascorbic acid-only solution showed that the effect of the chitosan solution was due to the chitosan and not the ascorbic acid. Intake experiments revealed that by day 2, chitosan treated house flies consumed significantly less of the diet compared to controls.

CONCLUSION

Chitosan, a biopesticide, when fed in no-choice experiments to three species of adult flies produced severe mortality within 4-6 days of ingestion. A working hypothesis suggests that by day 2 of the chitosan diet there appears to be a malfunction of the digestive tract and possibly the midgut microbiome. © 2020 Society of Chemical Industry.

Functionalizing a Polyelectrolyte Complex with Chitosan Derivatives to Tailor Membrane Surface Properties

Polyelectrolyte complex (PEC) materials show promise in the development of tunable membranes for aqueous and organic solvent separations, as well as in the creation of surface layers for fouling control. In this study, we developed a polyelectrolyte complex (PEC) functionalized by negatively charged carboxymethyl chitosan (CMC-) and positively charged quaternized chitosan (QC+) to tailor its surface properties and antibacterial efficacy. CMC- and QC+ were prepared and characterized using FT-IR and ¹H NMR, which confirmed the presence of the carboxymethyl group and trimethylammonium group in CMC- and QC+ with 65.6% and 83.9% substitution, respectively. The CMC- functionalized PEC (CMC-/PEC) and QC+ functionalized PEC materials (QC+/PEC) were evaluated for their stability in water, resistance to organic and inorganic adsorption, and antibacterial action against a model microorganism, Pseudomonas putida. The results showed no release of chitosan derivatives after adsorption, and CMC-/PEC and QC+/PEC exhibited charge-based, selective repulsion of model organic and inorganic substances. Moreover, the functionalized PEC surfaces displayed lower bacterial attachment due to their smoother surfaces as compared to the bare ceramic membrane and their antimicrobial properties. Among the PEC samples, CMC-/PEC had the lowest cell attachment, while QC+/PEC showed the highest attachment due to electrostatic attraction. The ceramic and bare PEC surfaces were negligibly bactericidal, while cell viability decreased to 34.4 ± 10.2% and 30.6 ± 8.2% with the CMC-/PEC and QC+/PEC surfaces, respectively. In the filtration experiments, the unmodified PEC and CMC-/PEC showed lower rates of flux decline due to organic fouling than did the bare ceramic or QC+/PEC due to electrostatic repulsion. Furthermore, PECs as protective layers promoted much higher flux recoveries than simply backwashing the uncoated membranes. This surface tunability, then, enhances the potential of PECs either as fouling resistant materials or as a method to create a sacrificial, protective layer on surfaces that once fouled can be dissolved and re-established.

Transcriptome Analysis of Solanum Tuberosum Genotype RH89-039-16 in Response to Chitosan

Potato (Solanum tuberosum L.) is the worldwide most important nongrain crop after wheat, rice, and maize. The autotetraploidy of the modern commercial potato makes breeding of new resistant and high-yielding cultivars challenging due to complicated and time-consuming identification and selection processes of desired crop features. On the other hand, plant protection of existing cultivars using conventional synthetic pesticides is increasingly restricted due to safety issues for both consumers and the environment. Chitosan is known to display antimicrobial activity against a broad range of plant pathogens and shows the ability to trigger resistance in plants by elicitation of defense responses. As chitosan is a renewable, biodegradable and nontoxic compound, it is considered as a promising next-generation plant-protecting agent. However, the molecular and cellular modes of action of chitosan treatment are not yet understood. In this study, transcriptional changes in chitosan-treated potato leaves were investigated via RNA sequencing. Leaves treated with a well-defined chitosan polymer at low concentration were harvested 2 and 5 h after treatment and their expression profile was compared against water-treated control plants. We observed 32 differentially expressed genes (fold change ≥ 1; p-value ≤ 0.05) 2 h after treatment and 83 differentially expressed genes 5 h after treatment. Enrichment analysis mainly revealed gene modulation associated with electron transfer chains in chloroplasts and mitochondria, accompanied by the upregulation of only a very limited number of genes directly related to defense. As chitosan positively influences plant growth, yield, and resistance, we conclude that activation of electron transfer might result in the crosstalk of different organelles via redox signals to activate immune responses in preparation for pathogen attack, concomitantly resulting in a generally improved metabolic state, fostering plant growth and development. This conclusion is supported by the rapid and transient production of reactive oxygen species in a typical oxidative burst in the potato leaves upon chitosan treatment. This study furthers our knowledge on the mode of action of chitosan as a plant-protecting agent, as a prerequisite for improving its ability to replace or reduce the use of less environmentally friendly agro-chemicals.

Termiticidal activity of chitosan against the subterranean termites Reticulitermes flavipes and Reticulitermes virginicus

BACKGROUND

Chitosan is a derivative form of chitin, which is the major component of exoskeletons of arthropods and the cell walls of fungi. The antimicrobial activity of chitosan against lepidopterans, aphids, fungi and bacteria has been extensively investigated, but only one report on the termiticidal effect of chitosan on termites has been published. In this study, we examined the termiticidal activity of chitosan by exposing single colonies of Reticulitermes flavipes (Kollar) and Reticulitermes virginicus Banks to wood treated with six different concentrations of chitosan solutions. Termite mortality and percent mass loss of wood samples after exposure to termites for 4 weeks were calculated.

RESULTS

High termite mortality (≥ 94%) occurred during exposure of R. flavipes termites to chitosan-treated wood with ≥38 mg g^-1 treatment concentrations (≥ 2% chitosan), while <50% termite mortality was observed at lower treatment concentrations (11-15 mg g^-1 ; 0.5% and 1% chitosan). For R. virginicus, 100% mortality was observed at all levels of treatment concentrations. A decrease in the percent mass loss of the wood sample was apparent in samples treated with solutions with an increasing chitosan concentration, with a significant difference (P < 0.05) between lower and higher treatment concentrations. Treatment retention in wood samples upon leaching was also determined and showed retention levels of between 0 and 30 mg g^-1 chitosan retention.

CONCLUSION

This study investigated the exposure of subterranean termites to chitosan as a wood preservative. The results show that chitosan treatments at sufficiently high loadings could protect wood against termites, preferably under non-leaching conditions. © 2018 Society of Chemical Industry.

The Multifunctional Role of Chitosan in Horticultural Crops; A Review

Chitosan is a naturally occurring compound and is commercially produced from seafood shells. It has been utilized in the induction of the defense system in both pre and post-harvest fruits and vegetables against fungi, bacteria, viruses, and other abiotic stresses. In addition to that, chitosan effectively improves the physiological properties of plants and also enhances the shelf life of post-harvest produces. Moreover, chitosan treatment regulates several genes in plants, particularly the activation of plant defense signaling pathways. That includes the elicitation of phytoalexins and pathogenesis-related (PR) protein. Besides that, chitosan has been employed in soil as a plant nutrient and has shown great efficacy in combination with other industrial fertilizers without affecting the soil's beneficial microbes. Furthermore, it is helpful in reducing the fertilizer losses due to its coating ability, which is important in keeping the environmental pollution under check. Based on exhibiting such excellent properties, there is a striking interest in using chitosan biopolymers in agriculture systems. Therefore, our current review has been centered upon the multiple roles of chitosan in horticultural crops that could be useful in future crop improvement programs.

The effects of structural changes on the anti-microbial and anti-proliferative activities of diimidazolium salts

Anti-microbial and anti-proliferative activities of diimidazolium salts have been analyzed as a function of the main changes in their structural features.

Synthesis of chitosan derivative with diethyldithiocarbamate and its antifungal activity

With an aim to discover novel chitosan derivatives with enhanced antifungal properties compared with chitosan. Diethyl dithiocarbamate chitosan (EtDTCCS) was investigated and its structure was well identified. The antifungal activity of EtDTCCS against Alternaria porri (A. porri), Gloeosporium theae sinensis Miyake (G. theae sinensis), and Stemphylium solani Weber (S. solani) was tested at 0.25, 0.5, and 1.0 mg/mL, respectively. Compared with plain chitosan, EtDTCCS shows better inhibitory effect with 93.2% inhibitory index on G. theae sinensis at 1.0 mg/mL, even stronger than for polyoxin (82.5%). It was inferred derivatives of this kind may find potential applications for the treatment of various crop-threatening diseases.

Toward new classes of potent antibiotics: synthesis and antimicrobial activity of novel metallosaldach-imidazolium salts

Imidazolium salts (Im(+)-R(2)R(3)-Cl(-)) attached to the N,N'-bis(salicylidene)-(±)-trans-1,2-diaminocyclohexane (saldach) backbone (4a-f) have been designed and successfully applied for the synthesis of the corresponding mononuclear complexes with Mn(III) and Fe(III) ions. The molecular structures of the saldach ligands H2(R(1))2saldach(Im(+)-R(2)R(3)-Cl(-))2 (R(1) = H, tert-Bu, R(2) = H, Et, n-Bu, R(3) = H, Me) and their [M(III)Cl{(R(1))2saldach(Im(+)-R(2)R(3)-Cl(-))2}] (M = Mn, Fe) complexes have been established. The free ligands exist as the phenol-OH and not as the zwitterionic (imine)N-H(+)· · ·(-)O(phenol) tautomer. Antimicrobial activity of the target compounds revealed higher potent antibacterial activity against Salmonella aureus, B. subtilis while less effective against E. coli and C. albicans and inactivity against A. flavus. Compound (4d) and its Fe(III) complex (6d) exhibit remarkable extra-potent bactericidal activity.

Bioassay-guided fractionation of extracts from Hypericum perforatum in vitro roots treated with carboxymethylchitosans and determination of antifungal activity against human fungal pathogens

The aim of this study was to individuate, by bioassay-guided fractionation, promising antifungal fractions and/or constituents from Hypericum perforatum subsp. angustifolium in vitro roots. Treatments with chitosan, O-carboxymethylchitosan (CMC) and its derivatives were used to improve xanthone production in the roots. The bioassay-guided fractionation of CMC-treated roots led to the individuation of an ethyl acetate fraction, containing the highest amount of xanthones (6.8%) and showing the best antifungal activity with minimal inhibitory concentration (MIC) values of 53.82, 14.18, and 36.52 μg/ml, against Candida spp., Cryptococcus neoformans and dermatophytes, respectively. From this fraction the prenylated xanthone, biyouxanthone D has been isolated and represented the 44.59% of all xanthones detected. For the first time in the present paper biyouxanthone D has been found in H. perforatum roots and tested against C. neoformans, dermatophytes, and Candida species. The xanthone showed the greatest antifungal activity against C. neoformans and dermatophytes, with MIC values of 20.16, 22.63 μg/ml. In conclusion, the results obtained in the present study demonstrated that CMC-treated Hpa in vitro root extracts represent a tool for the obtainment of promising candidates for further pharmacological and clinical studies.

The toxic effect of chitosan/metal-impregnated textile to synanthropic mites

BACKGROUND

Plasma treatment enables effective binding of chitosan film to textile fibres. Heavy metal ions such as Ag(+) adsorbed onto the chitosan coating are known to enhance toxicity to microorganisms. The acaricidal effect of chitosan and chitosan/metal adducts with Ag(+) , Zn(2+) and Cu(2+) was tested in laboratory experiments. Tested species Acarus siro, Dermatophagoides farinae, D. pteronyssinus and Tyrophagus putrescentiae are allergen producers and important pests in house dust, stored food and feed. The mortality was compared after 24 h of exposure of mites to plasma-treated textiles.

RESULTS

Chitosan/Ag(+) textile caused at least 80% mortality of all species tested. Chitosan/Zn(2+) and chitosan/Cu(2+) textiles had a smaller effect on mite mortality than chitosan/Ag(+) . The conversion of chitosan/Ag(+) finishing to chitosan/Ag2 O did not influence the mortality of mites in biotests, except that of Tyrophagus putrescentiae, where the mortality decreased from 86 to 64%.

CONCLUSION

The results support a great potential of chitosan/Ag(+) fibres in acaricidal materials and/or mite protective food packages.

Testing insecticidal activity of novel chemically synthesized siRNA against Plutella xylostella under laboratory and field conditions

BACKGROUND

Over the last 60 years, synthetic chemical pesticides have served as a main tactic in the field of crop protection, but their availability is now declining as a result of the development of insect resistance. Therefore, alternative pest management agents are needed. However, the demonstration of RNAi gene silencing in insects and its successful usage in disrupting the expression of vital genes opened a door to the development of a variety of novel, environmentally sound approaches for insect pest management.

METHODOLOGY/PRINCIPAL FINDINGS

Six small interfering RNAs (siRNAs) were chemically synthesized and modified according to the cDNA sequence of P. xylostella acetylcholine esterase genes AChE1 and AChE2. All of them were formulated and used in insecticide activity screening against P. xylostella. Bioassay data suggested that Si-ace1_003 and Si-ace2_001 at a concentration of 3 µg cm(-2) displayed the best insecticidal activity with 73.7% and 89.0%, mortality, respectively. Additional bioassays were used to obtain the acute lethal concentrations of LC50 and LC90 for Si-ace2_001, which were 53.66 µg/ml and 759.71 µg/ml, respectively. Quantitative Real-time PCR was used to confirm silencing and detected that the transcript levels of P. xylostella AChE2 (PxAChE2) were reduced by 5.7-fold compared to the control group. Consequently, AChE activity was also reduced by 1.7-fold. Finally, effects of the siRNAs on treated plants of Brassica oleracea and Brassica alboglabra were investigated with different siRNA doses. Our results showed that Si-ace2_001 had no negative effects on plant morphology, color and growth of vein under our experimental conditions.

CONCLUSIONS

The most important finding of this study is the discovery that chemically synthesized and modified siRNA corresponding to P. xylostella AChE genes cause significant mortality of the insect both under laboratory and field conditions, which provides a novel strategy to control P. xylostella and to develop bio-pesticides based on the RNA interference technology.

Hydrophobic effect of amphiphilic derivatives of chitosan on the antifungal activity against Aspergillus flavus and Aspergillus parasiticus

Low molecular weight amphiphilic derivatives of chitosan were synthesized, characterized and their antifungal activities against Aspergillus flavus and Aspergillus parasiticus were tested. The derivatives were synthesized using as starting material a deacetylated chitosan sample in a two step process: the reaction with propyltrimethyl-ammonium bromide (Pr), followed by reductive amination with dodecyl aldehyde. Aiming to evaluate the effect of the hydrophobic modification of the derivatives on the antifungal activity against the pathogens, the degree of substitution (DS₁) by Pr groups was kept constant and the proportion of dodecyl (Dod) groups was varied from 7 to 29% (DS₂). The derivatives were characterized by ¹H-NMR and FTIR and their antifungal activities against the pathogens were tested by the radial growth of the colony and minimum inhibitory concentration (MIC) methods. The derivatives substituted with only Pr groups exhibited modest inhibition against A. flavus and A. parasiticus, like that obtained with deacetylated chitosan. Results revealed that the amphiphilic derivatives grafted with Dod groups exhibited increasing inhibition indexes, depending on polymer concentration and hydrophobic content. At 0.6 g/L, all amphiphilic derivatives having from 7.0 to 29% of Dod groups completely inhibited fungal growth and the MIC values were found to decrease from 4.0 g/L for deacetylated chitosan to 0.25-0.50 g/L for the derivatives. These new derivatives open up the possibility of new applications and avenues to develop effective biofungicides based on chitosan.

Synthesis and structure-activity relationship of N-(cinnamyl) chitosan analogs as antimicrobial agents

The current study focuses on the preparation of new N-(cinnamyl) chitosan derivatives as antimicrobial agents against nine types of crop-threatening pathogens. Chitosan was reacted with a set of aromatic cinnamaldehyde analogs by reductive amination involving formation of the corresponding imines, followed by reduction with sodium borohydride to produce N-(cinnamyl) chitosan derivatives. The structural characterization was confirmed by (1)H and (13)C NMR spectroscopy and the degrees of substitution ranged from 0.08 to 0.28. The antibacterial activity was evaluated in vitro by minimum inhibitory concentration (MIC) against Agrobacterium tumefaciens and Erwinia carotovora. A higher inhibition activity was obtained by N-(α-methylcinnamyl) chitosan with MIC 1275 and 1025 mg/L against A. tumefaciens and E. carotovora, respectively followed by N-(o-methoxycinnamyl) chitosan (MIC=1925 and 1550 mg/L, respectively). The antifungal assessment was evaluated in vitro by mycelial radial growth technique against Alternaria alternata, Botrytis cinerea, Botryodiplodia theobromae, Fusarium oxysporum, Fusarium solani, Pythium debaryanum and Phytophthora infestans. N-(o-methoxycinnamyl) chitosan showed the highest antifungal activity among the tested compounds against the airborne fungi A. alternata, B. cinerea, Bd. theobromae and Ph. infestans with EC₅₀ of 672, 796, 980 and 636 mg/L, respectively. However, N-(p-N-dimethylaminocinnamyl) chitosan was the most active against the soil born fungi F. oxysporum, F. solani and P. debaryanum (EC50=411, 566 and 404 mg/L, respectively). On the other hand, the chitosan derivatives caused significant reduction in spore germination of A. alternata, B. cinerea, F. oxysporum and F. solani compared to chitosan and the reduction in spore germination was higher than that of the mycelia inhibition. The synthesis and characterization of new chitosan derivatives are ongoing in our laboratory aiming to obtain derivatives with higher antimicrobial activities and used as safe alternatives to harmful microbicides.

Synthesis, characterization and in vitro drug release of magnetic N-benzyl-O-carboxymethylchitosan nanoparticles loaded with indomethacin

Magnetic N-benzyl-O-carboxymethylchitosan nanoparticles were synthesized through incorporation and in situ methods and characterized by Fourier transform infrared spectroscopy, X-ray diffraction, differential scanning calorimetry, and magnetization measurements. Indomethacin was incorporated into the nanoparticles via the solvent evaporation method. The indomethacin-loaded magnetic nanoparticles were characterized by the same techniques, and also by transmission electron microscopy. The nanoparticles containing the polymer showed a drug loading efficiency of between 60.8% and 74.8%, and the magnetic properties were not significantly affected by incorporation of the drug. The in vitro drug release study was carried out in simulated body fluid, pH 7.4 at 37°C. The profiles showed an initial fast release, which became slower as time progressed. The percentage of drug released after 5 h was between 60% and 90%, and the best fitting mathematical model for drug release was the Korsmeyer-Peppas model, indicating a Fickian diffusion mechanism.

Quaternary Salts of Chitosan: History, Antimicrobial Features, and Prospects

Recently, increasing attention has been paid to water-soluble derivatives of chitosan at its applications. The chemical characteristics and the antimicrobial properties of these salts can play significant role in pharmacological and food areas mainly as carriers for drug delivery systems and as antimicrobial packaging materials. In the current paper, a historical sequence of the main preparative methods, physical chemistry aspects, and antimicrobial activity of chitosan quaternized derivatives are presented and briefly discussed. In general, the results indicated that the quaternary derivatives had better inhibitory effects than the unmodified chitosan.