Use of a microcolumn packed with modified carbon nanofibers coupled with inductively coupled plasma mass spectrometry for simultaneous on-line preconcentration and determination of trace rare earth elements in biological samples

Highly sensitive detection of Tb3+ and ATP based on a novel asymmetric anthracene derivative

A novel fluorescent sensor based on an asymmetric anthracene derivative (SSAPA) was designed and synthesized. Using this molecule, a rapid and sensitive assay for detecting Tb³⁺ and ATP in aqueous solutions was established. The SSAPA molecule had excellent aggregation-induced emission (AIE) performance and good aqueous dispersion ability. This molecule could coordinate with Tb³⁺ and the fluorescence quenched linearly with the increase in the concentration of Tb³⁺ from 0.005 to 1.2 μM. Since both Tb³⁺ and adenosine triphosphate (ATP) have strong binding ability, ATP can compete with Tb³⁺ from the SSAPA/Tb³⁺ complex leading to fluorescence recovery. In this way, a brand-new fluorescent "turn-on" assay for ATP in the range from 0.01 to 0.4 μM was developed using the Tb³⁺-based complex probe. The detection limits for Tb³⁺ and ATP both reached single-digit nanomole per millilitre (2.8 nM and 4.5 nM, respectively), which demonstrated that this method has high sensitivity. Besides, Tb³⁺ and ATP also could be well detected in other complex environments such as real water samples or serum samples. This study provides a feasible assay for detecting trace amounts of Tb³⁺ and ATP in aqueous solutions.

Emerging technologies for the recovery of rare earth elements (REEs) from the end-of-life electronic wastes: a review on progress, challenges, and perspectives

The demand for rare earth elements (REEs) has significantly increased due to their indispensable uses in integrated circuits of modern technology. However, due to the extensive use of high-tech applications in our daily life and the depletion of their primary ores, REE's recovery from secondary sources is today needed. REEs have now attracted attention to policymakers and scientists to develop novel recovery technologies for materials' supply sustainability. This paper summarizes the recent progress for the recovery of REEs using various emerging technologies such as bioleaching, biosorption, cryo-milling, electrochemical processes and nanomaterials, siderophores, hydrometallurgy, pyrometallurgy, and supercritical CO₂. The challenges facing this recovery are discussed comprehensively and some possible improvements are presented. This work also highlights the economic and engineering aspects of the recovery of REE from waste electrical and electronic equipment (WEEE). Finally, this review suggests that greener and low chemical consuming technologies, such as siderophores and electrochemical processes, are promising for the recovery of REEs present in small quantities. These technologies present also a potential for large-scale application.

Recovery of Rare Earth Elements by Carbon-Based Nanomaterials-A Review

Modern societies depend strongly on electronic and electric equipment (EEE) which has a side effect result on the large production of electronic wastes (e-waste). This has been regarded as a worldwide issue, because of its environmental impact-namely due to non-adequate treatment and storage limitations. In particular, EEE is dependent on the availability of rare earth elements (REEs), considered as the "vitamins" of modern industry, due to their crucial role in the development of new cutting-edge technologies. High demand and limited resources of REEs in Europe, combined with potential environmental problems, enforce the development of innovative low-cost techniques and materials to recover these elements from e-waste and wastewaters. In this context, sorption methods have shown advantages to pre-concentrate REEs from wastewaters and several studies have reported the use of diverse nanomaterials for these purposes, although mostly describing the sorption of REEs from synthetic and mono-elemental solutions at unrealistic metal concentrations. This review is a one-stop-reference by bringing together recent research works in the scope of the application of carbon nanomaterials for the recovery of REEs from water.

Determination of rare earth elements in saline matrices using dispersed particle extraction and inductively coupled plasma mass spectrometry

RATIONALE

Rare earth elements play an important role in identifying and indexing the origin of historical and geological samples. In this work, a new approach for the characterization of rare earth elements (REEs) in aqueous sample solutions with high salinity is presented.

METHODS

Prior to analysis by inductively coupled plasma mass spectrometry (ICP-MS) the target analytes were separated from interfering matrix constituents by the use of surface-functionalized nanoparticles. Compared with common matrix separation techniques, such as solid-phase extraction (SPE), the strength of the method lies in the combination of an advanced extraction procedure with internal standard correction. Thus, known limitations of SPE such as column clogging or incomplete analyte elution could be completely circumvented. Furthermore, time-consuming approaches for signal quantification such as matrix-matched calibration could be avoided since the applied internal standard allows the correction of matrix-induced deviations in sample extraction and ICP-MS analysis.

RESULTS

With the developed procedure detection limits <1 ng L(-1) could be achieved for all the investigated elements, with satisfactory relative standard deviations (RSDs) of 3-26% for unspiked samples and <1-2% for spiked samples. Results derived from recovery experiments with spiked oil accumulation water samples confirmed the applicability of the proposed procedure for the determination of REEs in highly saline sample solutions. The procedure was successfully applied to the study of oil accumulation water samples from different oil fields in Lower Austria.

CONCLUSIONS

A sample pretreatment procedure with subsequent ICP-MS analysis for the accurate determination of REEs in aqueous sample solutions with high salinity has been developed.

Trace rare earth element detection in food and agricultural products based on flow injection walnut shell packed microcolumn preconcentration coupled with inductively coupled plasma mass spectrometry

With the extensive use of rare earth elements (REEs) in agriculture as fertilizer and feed additives, the concentration of REEs has increased in environmental and biological samples and finally impaired human health by food chain accumulation. The determination of trace REEs has gained considerable importance because of their toxicity and increasing occurrence. In this work, walnut shell has been used as the green adsorbent in online preconcentration and detection of REEs in food and agricultural products coupled with inductively coupled plasma mass spectrometry (ICP-MS). Because of the porous surface and abundant -COO(-) groups on the walnut shell surface, the walnut shell-packed microcolumn provides high adsorption efficiency and high tolerable capacity for coexisting ions. Under the optimized conditions, the adsorption efficiency of the walnut shell packed microcolumn was as high as 98.9% for 15 REEs, and the tolerable concentration ratios were between 2000 and 80,000,000 for 37 kinds of coexisting interfering ions. The enhancement factors achieved were 79-102 for 15 REEs with a sample loading volume of 4.7 mL. The detection limits were in the range of 2-34 pg g(-1). The relative standard deviation for 11 replicate preconcentrations of 2.5 ng L(-1) REEs solution ranged from 0.5 to 2.0%. The present method was successfully applied to selective determination of REEs in 4 environmental and biological certified reference materials and 18 locally collected food and agricultural products.

Solid-phase extraction of Cu, Co and Pb on oxidized single-walled carbon nanotubes and their determination by inductively coupled plasma mass spectrometry

A novel method using a microcolumn packed with single-walled carbon nanotubes (SWNTs) as a new adsorption material was developed for the preconcentration of trace Cu, Co and Pb in biological and environmental samples prior to their determination by inductively coupled plasma mass spectrometry (ICP-MS). SWNTs oxidized with concentrated nitric acid have been proved to possess an exceptional adsorption capability for the analytes due to their surface functionalization. The adsorption behaviors of the analytes on SWNTs under dynamic conditions were studied systematically. The main factors influencing the preconcentration and determination of the analytes (pH, sample flow rate and volume, eluent concentration and interfering ions) have been examined in detail. Under the optimum conditions, the detection limits for Cu, Co and Pb were 39, 1.2 and 5.4 pg mL(-1), respectively; the relative standard deviations (RSDs) were found to be less than 6.0% (n=9, c=1.0 ng mL(-1)). This method was validated using a certified reference material of mussel, and has been successfully applied for the determination of trace Cu, Co and Pb in real water sample with the recoveries of 96.0-109%.