Reactions of the selected ion flow tube mass spectrometry reagent ions H3O(+) and NO(+) with a series of volatile aldehydes of biogenic significance

Exposure assessment during paint spraying and drying using PTR-ToF-MS

Spraying is a common way to distribute occupational products, but it puts worker's health at risk by exposing them to potentially harmful particles and gases. The objective of this study is to use time-resolved measurements to gain an understanding of spray applications at the process level and to compare them to predictions of exposure models. We used proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS) at 1-s time resolution to monitor the gas phase concentration of the solvents acetone, ethanol, butyl acetate, xylene and 1-methoxy-2-propy acetate during outdoor spraying and indoor drying of metal plate under various conditions of outdoor air supply. We found that during spraying, gas-phase exposure was dominated by the more volatile solvents acetone and ethanol, which exhibited strong concentration variations due to the outdoor winds. During drying, exposure strongly depended on the strength of ventilation. Under conditions with high supply of outdoor air, our measurements show a near-exponential decay of the solvent concentrations during drying. Conversely, under conditions without outdoor air supply, the drying process required hours, during which the less volatile solvents passed through a concentration maximum in the gas phase, so that the exposure during drying exceeded the exposure during spraying. The concentrations measured during spraying were then compared for each of the substances individually with the predictions of the exposure models ECETOC TRA, Stoffenmanager, and ART using TREXMO. For these conditions, ECETOC TRA and Stoffenmanager predicted exposures in the measured concentration range, albeit not conservative for all solvents and each application. In contrast, ART largely overestimated the exposure for the more volatile solvents acetone and ethanol and slightly underestimated exposure to 1M2PA for one spraying. ECETOC TRA and ART do not have options to predict exposure during drying. Stoffenmanager has the option to predict drying together with spraying, but not to predict the drying phase independently. Our study demonstrates the importance of considering both the spray cloud and solvent evaporation during the drying process. To improve workplace safety, there is a critical need for enhanced exposure models and comprehensive datasets for calibration and validation covering a broader range of exposure situations.

Robust Automated SIFT-MS Quantitation of Volatile Compounds in Air Using a Multicomponent Gas Standard

Selected ion flow tube mass spectrometry, SIFT-MS, has been widely used in industry and research since its introduction in the mid-1990s. Previously described quantitation methods have been advanced to include a gas standard for a more robust and repeatable analytical performance. The details of this approach to calculate the concentrations from ion-molecule reaction kinetics based on reaction times and instrument calibration functions determined from known concentrations in the standard mix are discussed. Important practical issues such as the overlap of product ions are outlined, and best-practice approaches are presented to enable them to be addressed during method development. This review provides a fundamental basis for a plethora of studies in broad application areas that are possible with SIFT-MS instruments.

How to Use Ion-Molecule Reaction Data Previously Obtained in Helium at 300 K in the New Generation of Selected Ion Flow Tube Mass Spectrometry Instruments Operating in Nitrogen at 393 K

Selected ion flow tube mass spectrometry (SIFT-MS) instruments have significantly developed since this technique was introduced more than 20 years ago. Most studies of the ion-molecule reaction kinetics that are essential for accurate analyses of trace gases and vapors in air and breath were conducted in He carrier gas at 300 K, while the new SIFT-MS instruments (optimized to quantify concentrations down to parts per trillion by volume) operate with N₂ carrier gas at 393 K. Thus, we pose the question of how to reuse the data from the extensive body of previous literature using He at room temperature in the new instruments operating with N₂ carrier gas at elevated temperatures. Experimentally, we found the product ions to be qualitatively similar, although there were differences in the branching ratios, and some reaction rate coefficients were lower in the heated N₂ carrier gas. The differences in the reaction kinetics may be attributed to temperature, an electric field in the current flow tubes, and the change from He to N₂ carrier gas. These results highlight the importance of adopting an updated reaction kinetics library that accounts for the new instruments' specific conditions. In conclusion, almost all previous rate coefficients may be used after adjustment for higher temperatures, while some product ion branching ratios need to be updated.

Quantitative Distributions of Product Ions and Reaction Times with a Binary Mixture of VOCs in Ambient Pressure Chemical Ionization

A model to quantitatively predict ion abundances from atmospheric pressure chemical ionization (APCI) between hydrated protons and a volatile organic compound (VOC) was extended to binary mixtures of VOCs. The model includes differences in vapor concentrations, rate coefficients, and reaction times and is enhanced with cross reactions between neutral vapors and protonated monomers. In this model, two specific VOCs were considered, a ketone, 6-methyl-5-hepten-2-one (M, and an amine, 2,6-di-tert-butyl-pyridine (N), with measured "conditional rate coefficients" (in cm³·s^-1) of k_M = 1.11 × 10^-9 and k_N = 9.17 × 10^-10, respectively. The cross reaction of MH⁺(H₂O)_x to NH⁺(H₂O)_y was measured as k_cr = 1.31 × 10^-12 at 60 °C. Cross reactions showed an impact on ion abundances at t > 30 ms for equal vapor concentrations of 100 ppb for M and N. In contrast, this impact was negligible for vapor concentrations of 1 ppb and did not exceed 5% change in product ion abundance up to 1000 ms reaction times. The model was validated with laboratory measurements to within ∼10% using an ion mobility spectrometer and effective reaction time obtained from computational fitting of experimental findings. This was necessitated by complex flow patterns in the ion source volume and was determined as ∼10.5 ms. The model has interpretative and predictive value for quantitative analysis of responses with ambient pressure ion sources for mass spectrometry and ion mobility spectrometry.

Different reactivities of H3 O+ (H2 O)n with unsaturated and saturated aldehydes: ligand-switching reactions govern the quantitative analytical sensitivity of SESI-MS

RATIONALE

The detection sensitivity of secondary electrospray ionisation mass spectrometry (SESI-MS) is much lower for saturated aldehydes than for unsaturated aldehydes. This needs to be understood in terms of gas phase ion-molecule reaction kinetics and energetics to make SESI-MS analytically more quantitative.

METHODS

Parallel SESI-MS and selected ion flow tube mass spectrometry (SIFT-MS) analyses were carried out of air containing variable accurately determined concentrations of saturated (C5, pentanal; C7, heptanal; C8 octanal) and unsaturated (C5, 2-pentenal; C7, 2-heptenal; C8, 2-octenal) aldehyde vapours. The influence of the source gas humidity and the ion transfer capillary temperature, 250 and 300°C, in a commercial SESI-MS instrument was explored. Separate experiments were carried out using SIFT to determine the rate coefficients, k₇₃ , for the ligand-switching reactions of the H₃ O⁺ (H₂ O)₃ ions with the six aldehydes.

RESULTS

The relative slopes of the plots of SESI-MS ion signal against SIFT-MS concentration were interpreted as the relative SESI-MS sensitivities for these six compounds. The sensitivities for the unsaturated aldehydes were 20 to 60 times greater than for the corresponding C5, C7 and C8 saturated aldehydes. Additionally, the SIFT experiments revealed that the measured k₇₃ are three or four times greater for the unsaturated than for the saturated aldehydes.

CONCLUSIONS

The trends in SESI-MS sensitivities are rationally explained by differences in the rates of the ligand-switching reactions, which are justified by theoretically calculated equilibrium rate constants derived from thermochemical density functional theory (DFT) calculations of Gibb's free energy changes. The humidity of SESI gas thus favours the reverse reactions of the saturated aldehyde analyte ions, effectively suppressing their signals in contrast to their unsaturated counterparts.

Recent developments and applications of selected ion flow tube mass spectrometry (SIFT-MS)

Selected ion flow tube mass spectrometry (SIFT-MS) is now recognized as the most versatile analytical technique for the identification and quantification of trace gases down to the parts-per-trillion by volume, pptv, range. This statement is supported by the wide reach of its applications, from real-time analysis, obviating sample collection of very humid exhaled breath, to its adoption in industrial scenarios for air quality monitoring. This review touches on the recent extensions to the underpinning ion chemistry kinetics library and the alternative challenge of using nitrogen carrier gas instead of helium. The addition of reagent anions in the Voice200 series of SIFT-MS instruments has enhanced the analytical capability, thus allowing analyses of volatile trace compounds in humid air that cannot be analyzed using reagent cations alone, as clarified by outlining the anion chemistry involved. Case studies are reviewed of breath analysis and bacterial culture volatile organic compound (VOC), emissions, environmental applications such as air, water, and soil analysis, workplace safety such as transport container fumigants, airborne contamination in semiconductor fabrication, food flavor and spoilage, drugs contamination and VOC emissions from packaging to demonstrate the stated qualities and uniqueness of the new generation SIFT-MS instrumentation. Finally, some advancements that can be made to improve the analytical capability and reach of SIFT-MS are mentioned.

Kinetics of reactions of NH4 + with some biogenic organic molecules and monoterpenes in helium and nitrogen carrier gases: A potential reagent ion for selected ion flow tube mass spectrometry

RATIONALE

To assess the suitability of NH₄ ⁺ as a reagent ion for trace gas analysis by selected ion flow tube mass spectrometry, SIFT-MS, its ion chemistry must be understood. Thus, rate coefficients and product ions for its reactions with typical biogenic molecules and monoterpenes need to be experimentally determined in both helium, He, and nitrogen, N₂ , carrier gases.

METHODS

NH₄ ⁺ and H₃ O⁺ were generated in a microwave gas discharge through an NH₃ and H₂ O vapour mixture and, after m/z selection, injected into He and N₂ carrier gas. Using the conventional SIFT method, NH₄ ⁺ reactions were then studied with M, the biogenic molecules acetone, 1-propanol, 2-butenal, trans-2-heptenal, heptanal, 2-heptanone, 2,3-heptanedione and 15 monoterpene isomers to obtain rate coefficients, k, and product ion branching ratios. Polarisabilities and dipole moments of the reactant molecules and the enthalpy changes in proton transfer reactions were calculated using density functional theory.

RESULTS

The k values for the reactions of the biogenic molecules were invariably faster in N₂ than in He but similar in both bath gases for the monoterpenes. Adducts NH₄ ⁺ M were the dominant product ions in He and N₂ for the biogenic molecules, whereas both MH⁺ and NH₄ ⁺ M product ions were observed in the monoterpene reactions; the monoterpene ratio correlating (R²  = 0.7) with the proton affinity, PA, of the monoterpene molecule as calculated. The data indicate that this adduct ion formation is the result of bimolecular rather than termolecular association.

CONCLUSIONS

NH₄ ⁺ can be a useful reagent ion for SIFT-MS analyses of molecules with PA(M) < PA(NH₃ ) when the dominant single product ion is the adduct NH₄ ⁺ M. For molecules with PA(M) > PA(NH₃ ), such as monoterpenes, both MH⁺ and NH₄ ⁺ M ions are likely products, which must be determined along with k by experiment.

Ternary association reactions of H3 O+ , NO+ and O2 +• with N2 , O2 , CO2 and H2 O; implications for selected ion flow tube mass spectrometry analyses of air and breath

RATIONALE

The reactions of the reagent ions used for trace gas analysis in selected ion flow tube mass spectrometry (SIFT-MS), R⁺ , viz. H₃ O⁺ , NO⁺ and O₂ ⁺ , with the major gases in air and breath samples, M, viz. N₂ , O₂ , CO₂ and H₂ O, are investigated. These reactions are seen to form weakly-bound adduct ions, R⁺ M, by ternary association reactions that must not be mistaken for genuine volatile organic compound (VOC) analyte ions.

METHODS

The ternary association rate coefficients mediated by helium (He) carrier gas atoms, k_3a , have been determined for all combinations of R⁺ and M, which form R⁺ M adduct ions ranging in m/z from 47 (H₃ O⁺ N₂ ) to 76 (O₂ ^+• CO₂ ). This was achieved by adding variable amounts of M (up to 0.5 mbar pressure) into the He carrier gas (pressure of 1.33 mbar) in a SIFT-MS flow tube at 300 K. Parabolic curvature was observed on some of the semi-logarithmic decay curves that allowed the rate coefficients mediated by M molecules, k_3b , to be estimated.

RESULTS

Values of k_3a were found to range from 1 × 10^-31  cm⁶  s^-1 to 5 × 10^-29  cm⁶  s^-1 , which form mass spectral R⁺ M "ghost peaks" of significant strength when analysing VOCs at parts-per-billion concentrations. It was seen that the R⁺ M adduct ions (except when M is H₂ O) react with H₂ O molecules by ligand switching forming the readily recognised monohydrates of the initial reagent cations R⁺ H₂ O. Whilst this ligand switching diminishes the R⁺ M adduct ghost peaks, it does not eliminate them entirely.

CONCLUSIONS

The significance of these adduct ions for trace gas analysis by SIFT-MS in the low m/z region is alluded to, and some examples are given of m/z spectral overlaps of the R⁺ M and R⁺ H₂ O adduct cations with analyte cations of VOCs formed by analysis of complex media like exhaled breath, warning that ghost peaks will be enhanced using nitrogen carrier gas in SIFT-MS.

The potential of NO+ and O2 +• in switchable reagent ion proton transfer reaction time-of-flight mass spectrometry

Selected ion flow tube mass spectrometry (SIFT-MS) and proton transfer reaction mass spectrometry with switchable reagent ion capability (PTR+SRI-MS) are analytical techniques for real-time qualification and quantification of compounds in gas samples with trace level concentrations. In the detection process, neutral compounds-mainly volatile organic compounds-are ionized via chemical ionization with ionic reagents or primary ions. The most common reagent ions are H₃ O⁺ , NO⁺ and O₂ ^+• . While ionization with H₃ O⁺ occurs by means of proton transfer, the ionization via NO⁺ and O₂ ^+• offers a larger variety on ionization pathways, as charge transfer, hydride abstraction and so on are possible. The distribution of the reactant into various reaction channels depends not only on the usage of either NO⁺ or O₂ ^+• , but also on the class of analyte compounds. Furthermore, the choice of the reaction conditions as well as the choice of either SIFT-MS or PTR+SRI-MS might have a large impact on the resulting products. Therefore, an overview of both NO⁺ and O₂ ^+• as reagent ions is given, showing differences between SIFT-MS and PTR+SRI-MS as used analytical methods revealing the potential how the knowledge obtained with H₃ O⁺ for different classes of compounds can be extended with the usage of NO⁺ and O₂ ^+• .

Sensitivity of secondary electrospray ionization mass spectrometry to a range of volatile organic compounds: Ligand switching ion chemistry and the influence of Zspray™ guiding electric fields

RATIONALE

Secondary electrospray ionization (SESI) is currently only semi-quantitative. In the Zspray™ arrangement of SESI-MS, the transfer of ions from near atmospheric pressure to a triple quadrupole is achieved by guiding electric fields that partially desolvate both reagent and analyte ions which must be understood. Also, to make SESI-MS more quantitative, the mechanisms and the kinetics of the reaction processes, especially ligand switching reactions of hydrated hydronium reagent ions, H₃ O⁺ (H₂ O)_n , with volatile organic compound (VOC) molecules, need to be understood.

METHODS

A modified Zspray™ ESI ion source operating at sub-atmospheric pressure with analyte sample gas introduced via an inlet coaxial with the spray was used. Variation of the ion-guiding electric fields was used to reveal the degree of desolvation of both reagent and analyte ions. The instrument sensitivity was determined for several classes of VOCs by introducing bag samples of suitably varying concentrations as quantified on-line using selected ion flow tube MS.

RESULTS

Electric field desolvation resulted in largely protonated VOCs, MH⁺ , and their monohydrates, MH⁺ H₂ O, and for some VOCs proton-bound dimer ions, MH⁺ M, were formed. There was a highly linear response of the ion signal to the measured VOC sample concentration, which provided the instrument sensitivities, S, for 25 VOCs. The startling results show very wide variations in S from near 0 to 1 for hydrocarbons, and up to 100, on a relative scale, for polar compounds such as monoketones and unsaturated aldehydes.

CONCLUSIONS

The complex ion chemistry occurring in the SESI ion source, largely involving gas-phase ligand switching, results in widely variable sensitivities for different classes of VOCs. The sensitivity is observed to depend on the dipole moment and proton affinity of the analyte VOC molecule, M, and to decrease with the observed fraction of MH⁺ H₂ O, but other yet unrecognized factors must play a significant role.

Understanding Gas Phase Ion Chemistry Is the Key to Reliable Selected Ion Flow Tube-Mass Spectrometry Analyses

Ion-molecule reactions (IMR) are at the very core of trace gas analyses in modern chemical ionization (CI) mass spectrometer instruments, which are increasingly being used in diverse areas of research and industry. The focus of this Perspective is on the ion chemistry that underpins gas-phase analytical CI methods. Special attention is given to the soft chemical ionization method known as selected ion flow tube-mass spectrometry (SIFT-MS). The processes involved in the ion chemistry of the reagent cations, H₃O⁺, NO⁺, and O₂^+•, and the anions, O^-•, O₂^-•, OH^-, and NO₂^-, are discussed in some detail. Stressed throughout is that an understanding of these processes is mandatory to obtain reliable analyses of humid gaseous media such as ambient air and exhaled breath. It is indicated that further research is needed to understand the consequences of replacing helium in some situations by the more readily available nitrogen as the carrier gas in SIFT-MS.

Volatile compounds released by Nalophan; implications for selected ion flow tube mass spectrometry and other chemical ionisation mass spectrometry analytical methods

Nalophan bags are commonly used to collect breath samples for volatile metabolite analysis. Volatile organic compounds (VOCs) released from the polymer can, however, be mistaken as breath metabolites when analyses are performed by selected ion flow tube mass spectrometry, SIFT-MS, or techniques that depend on a proper understanding of ion chemistry.

METHODS

Three analytical techniques were used to analyse the VOCs released into the nitrogen used to expand Nalophan bags, viz. gas chromatography/mass spectrometry (GC/MS), secondary electrospray ionization mass spectrometry (SESI-MS) and selected ion flow tube mass spectrometry (SIFT-MS). The most significant VOCs were identified and quantified by SIFT-MS as a function of storage time, temperature and humidity.

RESULTS

The consistent results obtained by these three analytical methods identify 1,2-ethanediol (ethylene glycol) and 2-methyl-1,3-dioxolane as the major VOCs released by the Nalophan. Their concentrations are enhanced by increasing the bag storage temperature and time, reaching 170 parts-per-billion by volume (ppbv) for ethylene glycol and 34 ppbv for 2-methyl-1,3-dioxolane in humid nitrogen (absolute humidity of 5%) contained in an 8-L Nalophan bag stored at 37°C for 160 min.

CONCLUSIONS

Using H₃ O⁺ reagent ions for SIFT-MS and SESI-MS analyses, the following analyte ions (m/z values) are affected by the Nalophan impurities: 45, 63, 81, 89 and 99, which can compromise analyses of acetaldehyde, ethylene glycol, monoterpenes, acetoin, butyric acid, hexanal and heptane.

Ion chemistry of phthalates in selected ion flow tube mass spectrometry: isomeric effects and secondary reactions with water vapour

Reactions of H₃O⁺, O₂⁺ and NO⁺ with phthalates and secondary reactions of product ions with water vapor were studied by SIFT.

Ultrasensitive detection of volatile aldehydes with chemi-ionization-coupled time-of-flight mass spectrometry

The chemi-ionization reaction is a high-efficiency pathway to produce molecular ions in plasma, however, it has rarely been applied in mass spectrometry to directly produce analyte ions. In this study, a novel chemi-ionization technique for mass spectrometry was applied for the direct and ultrasensitive detection of gaseous aldehydes. The ionization technique was enacted by a recently observed chemi-ionization reaction: the efficient proton transfer from H₂O to oxygenated compounds was stimulated by vacuum ultraviolet (VUV)-excited CH₂Cl₂. By analyzing a series of aliphatic aldehydes (C2-C5) and benzaldehyde with different proton affinities (PAs) and polarities, the ionization features of the new ionization method were investigated for the first time. The chemi-ionization of aldehydes presented soft ionization characteristics with fragmentation patterns analogous to that of VUV photoionization. The method showed ultrahigh sensitivities toward aldehydes (up to 1108 ± 6 counts pptv^-1 for benzaldehyde in 10 s acquisition time). The corresponding 3σ limits of detection (LODs) achieved 0.30-0.69 pptv, which are equivalent of 1.35-1.92 ng m^-3, for the compounds investigated. The humidity experiments revealed that the moisture in the sample gas had an evident impact on the detection efficiency of the analyte and the influence was PA dependent. In addition, the applicability of this ionization mode was further tested by analysis of aldehydes in cigarette smoke. This study provides a promising ionization method for greatly improving the current on-line detection sensitivity of volatile aldehydes.

Evolution of clinical and environmental health applications of exhaled breath research: Review of methods and instrumentation for gas-phase, condensate, and aerosols

Human breath, along with urine and blood, has long been one of the three major biological media for assessing human health and environmental exposure. In fact, the detection of odor on human breath, as described by Hippocrates in 400 BC, is considered the first analytical health assessment tool. Although less common in comparison to contemporary bio-fluids analyses, breath has become an attractive diagnostic medium as sampling is non-invasive, unlimited in timing and volume, and does not require clinical personnel. Exhaled breath, exhaled breath condensate (EBC), and exhaled breath aerosol (EBA) are different types of breath matrices used to assess human health and disease state. Over the past 20 years, breath research has made many advances in assessing health state, overcoming many of its initial challenges related to sampling and analysis. The wide variety of sampling techniques and collection devices that have been developed for these media are discussed herein. The different types of sensors and mass spectrometry instruments currently available for breath analysis are evaluated as well as emerging breath research topics, such as cytokines, security and airport surveillance, cellular respiration, and canine olfaction.

Evaluation of lipid peroxidation by the analysis of volatile aldehydes in the headspace of synthetic membranes using Selected Ion Flow Tube Mass Spectrometry, SIFT-MS

RATIONALE

Oxidative stress of cell membranes leads to a number of pathological processes associated with some diseases and is accompanied by the release of volatile aldehydes, which, potentially, can be used as biomarkers. Thus, the aim was to investigate peroxidation of defined synthetic membranes by direct quantitative analysis of volatile aldehydes.

METHODS

The concentration spectra of volatile compounds present in the headspace of synthetic membranes under peroxidation stress and following mechanical stress due to sonication were obtained using solid phase microextraction (SPME) in combination with Gas Chromatography Mass Spectrometry (SPME/GC/MS) and Selected Ion Flow Tube Mass Spectrometry (SIFT-MS). The focus was on the direct, real time quantification of volatile aldehydes. In addition, the total aldehydes in the aqueous membrane suspensions were quantified using the TBARS method.

RESULTS

Propanal, butanal, pentanal, hexanal, heptanal and malondialdehyde were detected and quantified in the humid headspace of the media containing the synthetic membranes following peroxidation. The composition and concentration of these saturated aldehydes strongly depend on the unsaturated fatty acids representation in the liposomes. Some protective effect of cholesterol was observed especially for membranes peroxidised by Fenton reagents and after application of a mechanical stress.

CONCLUSIONS

This study demonstrates that peroxidation of model synthetic membranes in vitro can be tracked in real time using direct quantification by SIFT-MS of several specific aldehydes in the headspace of the membrane suspensions. Cholesterol plays an important role in retaining membrane structure and can indirectly protect membranes from lipid peroxidation.

Kinetics and Product Formation during the Photooxidation of Butanol on Atmospheric Mineral Dust

Mineral dust particles have photochemical properties that can promote heterogeneous reactions on their surfaces and therefore alter atmospheric composition. Even though dust photocatalytic nature has received significant attention recently, most studies have focused on inorganic trace gases. Here, we investigated how light changes the chemical interactions between butanol and Arizona test dust, a proxy for mineral dust, under atmospheric conditions. Butanol uptake kinetics were measured, exploring the effects of UV light irradiation intensity (0-1.4 mW/cm²), relative humidity (0-10%), temperature (283-298 K), and butanol initial concentration (20-55 ppb). The composition of the gas phase was monitored by a high-resolution proton-transfer-reaction mass spectrometer (PTR-ToF-MS) operating in H₃O⁺ mode. Water was observed to play a significant role, initially reducing heterogeneous processing of butanol but enhancing reaction rates once it evaporated. Gas phase products were identified, showing that surface reactions of adsorbed butanol led to the emission of a variety of carbonyl containing compounds. Under actinic light these compounds will photolyze and produce hydroxyl radicals, changing dust processing from a sink of VOC into a source of reactive compounds.

Identification and quantification of VOCs by proton transfer reaction time of flight mass spectrometry: An experimental workflow for the optimization of specificity, sensitivity, and accuracy

Proton transfer reaction time of flight mass spectrometry (PTR-ToF-MS) is a direct injection MS technique, allowing for the sensitive and real-time detection, identification, and quantification of volatile organic compounds. When aiming to employ PTR-ToF-MS for targeted volatile organic compound analysis, some methodological questions must be addressed, such as the need to correctly identify product ions, or evaluating the quantitation accuracy. This work proposes a workflow for PTR-ToF-MS method development, addressing the main issues affecting the reliable identification and quantification of target compounds. We determined the fragmentation patterns of 13 selected compounds (aldehydes, fatty acids, phenols). Experiments were conducted under breath-relevant conditions (100% humid air), and within an extended range of reduced electric field values (E/N = 48-144 Td), obtained by changing drift tube voltage. Reactivity was inspected using H₃ O⁺ , NO⁺ , and O₂⁺ as primary ions. The results show that a relatively low (<90 Td) E/N often permits to reduce fragmentation enhancing sensitivity and identification capabilities, particularly in the case of aldehydes using NO⁺ , where a 4-fold increase in sensitivity is obtained by means of drift voltage reduction. We developed a novel calibration methodology, relying on diffusion tubes used as gravimetric standards. For each of the tested compounds, it was possible to define suitable conditions whereby experimental error, defined as difference between gravimetric measurements and calculated concentrations, was 8% or lower.

Gas-phase chemical ionization of 4-alkyl branched-chain carboxylic acids and 3-methylindole using H3 O+ , NO+ , and O2+ ions

RATIONALE

4-Methyloctanoic acid, 4-ethyloctanoic acid, 4-methylnonanoic acid, and 3-methylindole are primary contributors to the distinctive aroma and flavor of lamb meat. The reactions of H₃ O⁺ , NO⁺ , and O₂⁺ with these compounds, and identification of the product ions and their distribution, are fundamental to their characterization and rapid, real-time trace analysis using selected ion flow tube mass spectrometry (SIFT-MS).

METHODS

The chemical ionization of pure standards of 4-ethyloctanoic acid, 4-methyloctanoic acid, 4-ethylnonanoic acid, and 3-methylindole was carried out using the H₃ O⁺ , NO⁺ , and O₂⁺ reagent ions of a V200™ SIFT mass spectrometer. Kinetic data were calculated using the Langevin collision rate with parameterized trajectory equations. Identification of product ions, distribution, and interferences was performed by further evaluation of the pertinent ion-molecule reaction mechanisms, careful spectral analyses, and molecular mass-molecular structure pairing.

RESULTS

The collisional capture rate constants of the reaction of the precursor ions H₃ O⁺ , NO⁺ , and O₂⁺ , their extended hydrates and the analytes, which were assumed to occur at or near the collisional rate, were all of the order of 10^-9  cm³ molecule s^-1 - typical for bimolecular ion-molecule reactions. Positive identification of the primary and secondary product ions, fragmented ionic species, and potential ion conflicts and interferences, from each reagent ion channel, was determined for each compound.

CONCLUSIONS

We have established the ion chemistry involved in the ionization of the 4-alkyl branched-chain fatty acids and 3-methylindole using the precursor ions, H₃ O⁺ , NO⁺ , and O₂⁺ in SIFT-MS. The ion-molecular chemistry and the associated kinetics serve as a fundamental basis for the accurate characterization of these compounds by SIFT-MS.

Evaluation of peroxidative stress of cancer cells in vitro by real-time quantification of volatile aldehydes in culture headspace

RATIONALE

Peroxidation of lipids in cellular membranes results in the release of volatile organic compounds (VOCs), including saturated aldehydes. The real-time quantification of trace VOCs produced by cancer cells during peroxidative stress presents a new challenge to non-invasive clinical diagnostics, which as described here, we have met with some success.

METHODS

A combination of selected ion flow tube mass spectrometry (SIFT-MS), a technique that allows rapid, reliable quantification of VOCs in humid air and liquid headspace, and electrochemistry to generate reactive oxygen species (ROS) in vitro has been used. Thus, VOCs present in the headspace of CALU-1 cancer cell line cultures exposed to ROS have been monitored and quantified in real time using SIFT-MS.

RESULTS

The CALU-1 lung cancer cells were cultured in 3D collagen to mimic in vivo tissue. Real-time SIFT-MS analyses focused on the volatile aldehydes: propanal, butanal, pentanal, hexanal, heptanal and malondialdehyde (propanedial), that are expected to be products of cellular membrane peroxidation. All six aldehydes were identified in the culture headspace, each reaching peak concentrations during the time of exposure to ROS and eventually reducing as the reactants were depleted in the culture. Pentanal and hexanal were the most abundant, reaching concentrations of a few hundred parts-per-billion by volume, ppbv, in the culture headspace.

CONCLUSIONS

The results of these experiments demonstrate that peroxidation of cancer cells in vitro can be monitored and evaluated by direct real-time analysis of the volatile aldehydes produced. The combination of adopted methodology potentially has value for the study of other types of VOCs that may be produced by cellular damage.

Rapid Determination of Six Low Molecular Carbonyl Compounds in Tobacco Smoke by the APCI-MS/MS Coupled to Data Mining

A simple method was established for the rapid determination of low molecular carbonyl compounds by the combination of atmospheric pressure chemical ionization tandem mass spectrometry (APCI-MS/MS) and data mining. The ionization was carried out in positive mode, and six low molecular carbonyl compounds of acrolein, acetone, propionaldehyde, crotonaldehyde, butanone, and butyraldehyde were analyzed by both full scan mode and daughter scan mode. To overcome the quantitative difficulties from isomer of acetone/propionaldehyde and butanone/butyraldehyde, the quantitation procedure was performed with the characteristic ion of [CH₃O]⁺ under CID energy of 5 and 15 eV. Subsequently, the established method was successfully applied to analysis of six low molecular carbonyl compounds in tobacco smoke with analytical period less than four minutes. The contents of acrolein, acetone, propionaldehyde, crotonaldehyde, butanone, and butyraldehyde for a cigarette were about 63 ± 5.8, 325 ± 82, 55 ± 9.7, 11 ± 1.4, 67 ± 5.9, and 12 ± 1.8 μg/cig, respectively. The experimental results indicated that the established method had the potential application in rapid determination of low molecular carbonyl compounds.

Selected ion flow tube study of the reactions of H3 O+ and NO+ with a series of primary alcohols in the presence of water vapour in support of selected ion flow tube mass spectrometry

RATIONALE

Alcohols are often present in foods and other biological media, including exhaled breath, urine and cell culture headspace. For their analysis by selected ion flow tube mass spectrometry (SIFT-MS), the ion chemistry initiated by the reactions of the reagent ions H₃ O⁺ and NO⁺ with alcohol molecules in the presence of water molecules needs to be understood and quantitatively described.

METHODS

The reactions of H₃ O⁺ and NO⁺ ions have been studied with the primary alcohols, methanol, ethanol, 1-propanol, 1-butanol, 1-pentanol and 1-hexanol, under the conditions used for SIFT-MS analyses (1 Torr He; 0.1 Torr air sample; 300 K) and over a range of sample gas humidity from 1% to 5.5%.

RESULTS

The H₃ O⁺ reactions led to the formation of protonated alcohol molecules MH⁺ and their hydrates MH⁺ (H₂ O)_1,2,3 and (MH⁺ -H₂ O) fragment ions. The NO⁺ reactions were observed to proceed mainly via hydride ion transfer, resulting in the formation of [M-H]⁺ product ions. Formation of the NO⁺ M adduct ions was also observed due to ligand switching between the NO⁺ (H₂ O)_1,2 hydrated reagent ions and M, and via direct NO⁺ /M association in the case of ethanol. The variation in the percentages of the hydrated product ions with the air sample humidity is reported.

CONCLUSIONS

This detailed study has provided the kinetics data, including the secondary hydrated ion product distributions, for the reactions of a number of volatile primary alcohols with the SIFT-MS reagent ions H₃ O⁺ and NO⁺ , which allows their analyses by SIFT-MS in humid air and also helps in the interpretation of proton transfer reaction (PTR)-MS data. Copyright © 2016 John Wiley & Sons, Ltd.

Status of selected ion flow tube MS: accomplishments and challenges in breath analysis and other areas

This article reflects our observations of recent accomplishments made using selected ion flow tube MS (SIFT-MS). Only brief descriptions are given of SIFT-MS as an analytical method and of the recent extensions to the underpinning analytical ion chemistry required to realize more robust analyses. The challenge of breath analysis is given special attention because, when achieved, it renders analysis of other air media relatively straightforward. Brief overviews are given of recent SIFT-MS breath analyses by leading research groups, noting the desirability of detection and quantification of single volatile biomarkers rather than reliance on statistical analyses, if breath analysis is to be accepted into clinical practice. A 'strengths, weaknesses, opportunities and threats' analysis of SIFT-MS is made, which should help to increase its utility for trace gas analysis.

Direct detection and quantification of malondialdehyde vapour in humid air using selected ion flow tube mass spectrometry supported by gas chromatography/mass spectrometry

RATIONALE

It has been proposed that malondialdehyde (MDA) reflects free oxygen-radical lipid peroxidation and can be useful as a biomarker to track this process. For the analysis of MDA molecules in humid air by selected ion flow tube mass spectrometry (SIFT-MS), the rate coefficients and the ion product distributions for the reactions of the SIFT-MS reagent ions with volatile MDA in the presence of water vapour are required.

METHODS

The SIFT technique has been used to determine the rate coefficients and ion product distributions for the reactions of H3O(+), NO(+) and O2 (+•) with gas-phase MDA. In support of the SIFT-MS analysis of MDA, solid-phase microextraction, SPME, coupled with gas chromatography/mass spectrometry, GC/MS, has been used to confirm the identification of MDA.

RESULTS

The primary product ions have been identified for the reactions of H3O(+), NO(+) and O2 (+•) with MDA and the formation of their hydrates formed in humid samples is described. The following combinations of reagent and the analyte ions (given as m/z values) have been adopted for SIFT-MS analyses of MDA in the gas phase: H3O(+): 109; NO(+): 89, 102; O2 (+•): 72, 90, 108, 126. The detection and quantification of MDA released by a cell culture by SIFT-MS are demonstrated.

CONCLUSIONS

This detailed study has provided the kinetics data required for the SIFT-MS analysis of MDA in humid air, including exhaled breath and the headspace of liquid-phase biogenic media. The detection and quantification by SIFT-MS of MDA released by a cell culture are demonstrated.

Dopant titrating ion mobility spectrometry for trace exhaled nitric oxide detection

Ion mobility spectrometry (IMS) is a promising non-invasive tool for the analysis of exhaled gas and exhaled nitric oxide (NO), a biomarker for diagnosis of respiratory diseases. However, the high moisture in exhaled gas always brings about extra overlapping ion peaks and results in poor identification ability. In this paper, p-benzoquinone (PBQ) was introduced into IMS to eliminate the interference of overlapping ion peaks and realize the selective identification of NO. The overlapping ions caused by moisture were titrated by PBQ and then converted to hydrated PBQ anions (C6H4[Formula: see text](H2O)n). The NO concentration could be determined by quantifying gas phase hydrated nitrite anions (N[Formula: see text](H2O)n), product ions of NO. Under optimized conditions, a limit of detection (LOD) of about 1.4 ppbv and a linear range of 10-200 ppbv were obtained for NO even in 100% relative humidity (RH) purified air. Furthermore, this established method was applied to measure hourly the exhaled NO of eight healthy volunteers, and real-time monitoring the exhaled NO of an esophageal carcinoma patient during radical surgery. These results revealed the potential of the current dopant titrating IMS method in the measurement of exhaled NO for medical disease diagnosis.

SIFT-MS and FA-MS methods for ambient gas phase analysis: developments and applications in the UK

The origins of SIFT created to study interstellar chemistry and SIFT-MS developed for ambient gas and exhaled breath analysis and the UK centres in which these techniques are being exploited.