Comparison between electrochemistry/mass spectrometry and cytochrome P450 catalyzed oxidation reactions

Identification of transformation products from fluorinated lithium-ion battery additives TPFPB and TPFPP: forever chemicals of tomorrow?

Fluorinated organic compounds (FOCs) represent a class of synthetic chemicals distinguished by their resilient carbon-fluorine bonds, which demonstrate an ability to withstand environmental degradation over an extended period. The integration of FOCs into cutting-edge applications, including lithium-ion batteries (LiBs), presents considerable potential for environmental harm that has not yet been sufficiently addressed. This study focuses on the environmental fate of two fluorinated aromatics, tris(pentafluorophenyl)borane (TPFPB) and tris(pentafluorophenyl)phosphine (TPFPP), given their important role in improving the performance of LiBs. To achieve this, laboratory simulation methods including total oxidizable precursor assay, electrochemistry (EC), Fenton reaction, UV-C irradiation, and hydrolysis were employed. Liquid chromatography and gas chromatography coupled with high-resolution mass spectrometry were used for identification of transformation products (TPs) and prediction of their molecular formulae. Despite the structural similarity between TPFPB and TPFPP, distinct differences in electrochemical behavior and degradation pathways were observed. TPFPB readily underwent hydroxylation and hydrolysis, resulting in a wide range of 49 TPs. A total of 28 TPs were newly identified, including oligomers and highly toxic dioxins. In contrast, TPFPP degraded exclusively under harsh conditions, requiring the development of innovative conditioning protocols for EC. In total, the simulation experiments yielded nine structurally different compounds, including seven previously undescribed, partially defluorinated TPs. This study highlights the potential risks associated with the use of FOCs in LiBs and provides insight into the complex environmental behavior of FOCs.

N-dealkylation of amines during water disinfection - Revealing a new direction in the formation of disinfection by-products

Among numerous disinfection by-products (DBP) forming during aqueous chlorination nitrogen containing species are of special concern due to their toxicological properties. Nevertheless, corresponding reaction products of these natural and anthropogenic compounds are not sufficiently studied so far. An interesting reaction involves dealkylation of the substituted amine moiety. Here we present the results of the comparative study of one-electron oxidation and aqueous chlorination of several aliphatic and aromatic amines. The reaction products were reliably identified with gas chromatography - high resolution mass spectrometry (GC-HRMS), high pressure liquid chromatography - electrospray ionization high resolution mass spectrometry HPLC-ESI/HRMS), and electrochemistry - electrospray ionization high resolution mass spectrometry (EC-ESI/HRMS). Certain similarities dealing with the formation of the corresponding aldehydes and substitution of alkyl groups at the nitrogen atom for hydrogen were shown for the studied processes. The mechanism of the substituted amines' aqueous chlorination involving one-electron oxidation is proposed and confirmed by the array of the observed reaction products. Alternative reactions taking place in conditions of aqueous chlorination, i.e. aromatic electrophilic substitution, may successfully compete with dealkylation and produce major products.

Sample transformation in online separations: how chemical conversion advances analytical technology

While the advent of modern analytical technology has allowed scientists to determine the complexity of mixtures, it also spurred the demand to understand these sophisticated mixtures better. Chemical transformation can be used to provide insights into properties of complex samples such as degradation pathways or molecular heterogeneity that are otherwise unaccessible. In this article, we explore how sample transformation is exploited across different application fields to empower analytical methods. Transformation mechanisms include molecular-weight reduction, controlled degradation, and derivatization. Both offline and online transformation methods have been explored. The covered studies show that sample transformation facilitates faster reactions (e.g. several hours to minutes), reduces sample complexity, unlocks new sample dimensions (e.g. functional groups), provides correlations between multiple sample dimensions, and improves detectability. The article highlights the state-of-the-art and future prospects, focusing in particular on the characterization of protein and nucleic-acid therapeutics, nanoparticles, synthetic polymers, and small molecules.

Benfluorex metabolism complemented by electrochemistry-mass spectrometry

The hypolipidemic and hypoglycemic drug benfluorex was widely applied to treat type 2 diabetes mellitus and metabolic syndrome in overweight patients since 1976. However, benfluorex was connected to multiple cases of valvular heart disease and pulmonary arterial hypertension later on. Similar adverse drug reactions were previously found to be associated to the structurally related drug fenfluramine, which was attributed to the formation of its N-deethylated metabolite norfenfluramine. Even though norfenfluramine was known to be a common metabolite of fenfluramine and benfluorex, only fenfluramine was withdrawn from European and United States markets in 1997 while benfluorex remained available until 2009. In this work, the metabolism of benfluorex is simulated by an online hyphenation of electrochemistry and mass spectrometry and the observed transformation products are further characterized using liquid chromatography and high-resolution tandem mass spectrometry. Using this approach, norfenfluramine is found to be the main electrochemical transformation product of benfluorex. Considering the knowledge about norfenfluramine toxicity, rapid metabolite screening using electrochemistry hyphenated to mass spectrometry could have been used to predict the potential of benfluorex for adverse drug reactions early on, showcasing the value of electrochemical metabolism mimicry for rapid drug safety evaluation.

Comparison of in vitro approaches for predicting the metabolism of the selective androgen receptor modulator RAD140

The identification of metabolites allows for the expansion of possible targets for anti-doping analysis. Especially for novel substances such as selective androgen receptor modulators (SARMs), information on metabolic fate is scarce. Novel approaches such as the organ on a chip technology may provide a metabolic profile that resembles human in vivo samples more closely than approaches that rely on human liver fractions only. In this study, the SARM RAD140 was metabolized by means of subcellular human liver fractions, human liver spheroids in an organ on a chip platform, and electrochemical (EC) conversion. The resulting metabolites were analyzed with LC-HRMS/MS and compared to a human doping control urine sample that yielded an adverse analytical finding for RAD140. A total of 16 metabolites were detected in urine, while 14, 13, and 7 metabolites were detected in samples obtained from the organ on a chip experiment, the subcellular liver fraction, and EC experiments, respectively. All tested techniques resulted in the detection of RAD140 metabolites. In the organ on a chip samples, the highest number of metabolites were detected. The subcellular liver fractions and organ on a chip techniques are deemed complementary to predict metabolites of RAD140, as both techniques produce distinct metabolites that are also found in an anonymized human in vivo urine sample.

Electrochemistry coupled with mass spectrometry for the prediction of the environmental fate and elucidation of the degradation mechanisms of pesticides: current status and future prospects

One of the crucial steps in the development of a new pesticide (active molecule) is predicting its environmental and in vivo fate, so as to determine potential consequences to a living organism's health and ecology as a whole. In this regard, pesticides undergo transformation processes in response to biotic and abiotic stress. Therefore, there is a need to investigate pesticide transformation products (TPs) and the formation processes they could undergo during the manufacturing process and when discharged into the ecosystem. Although methods based on biological in vitro and in vivo experimental models are tools of choice for the elucidation of metabolic pathways of pesticides (xenobiotics in general), electrochemistry-based techniques offer numerous advantages such as rapid and low-cost analysis, easy implementation, low sample volume requirement, no matrix effects, and miniaturization to improve the performance of the developed methods. However, for greater efficiency, electrochemistry (EC) should be coupled with analytical techniques such as mass spectrometry (MS) and sometimes liquid chromatography (LC), leading to the so-called EC-MS and EC-LC-MS hybrid techniques. In this review, past studies, current applications and utilization of EC-MS and EC-LC-MS techniques for the simulation of environmental fate/degradation of pesticides were reviewed by selected studies with chemical transformation, structures of metabolites, and some experimental conditions. The current challenges and future trends for the mimicry and prediction of the environmental fate/degradation of pesticides based on electrochemical methods combined with mass spectrometry were highlighted.

The Combination of Electrochemistry and Microfluidic Technology in Drug Metabolism Studies

Drugs are metabolized within the liver (pH 7.4) by phase I and phase II metabolism. During the process, reactive metabolites can be formed that react covalently with biomolecules and induce toxicity. Identifying and detecting reactive metabolites is an important part of drug development. Preclinical and clinical investigations are conducted to assess the toxicity and safety of a new drug candidate. Electrochemistry coupled to mass spectrometry is an ideal complementary technique to the current preclinical studies, a pure instrumental approach without any purification steps and tedious protocols. The combination of microfluidics with electrochemistry towards the mimicry of drug metabolism offers portability, low volume of reagents and faster reaction times. This review explores the development of microfluidic electrochemical cells for mimicking drug metabolism.

One-Step Regio- and Stereoselective Electrochemical Synthesis of Orexin Receptor Antagonist Oxidative Metabolites

Synthesis of drug metabolites, which often have complex structures, is an integral step in the evaluation of drug candidate metabolism, pharmacokinetic (PK) properties, and safety profiles. Frequently, such synthetic endeavors entail arduous, multiple-step de novo synthetic routes. Herein, we present the one-step Shono-type electrochemical synthesis of milligrams of chiral α-hydroxyl amide metabolites of two orexin receptor antagonists, MK-8133 and MK-6096, as revealed by a small-scale (pico- to nano-mole level) reaction screening using a lab-built online electrochemistry (EC)/mass spectrometry (MS) (EC/MS) platform. The electrochemical oxidation of MK-8133 and MK-6096 was conducted in aqueous media and found to produce the corresponding α-piperidinols with exclusive regio- and stereoselectivity, as confirmed by high-resolution nuclear magnetic resonance (NMR) characterization of products. Based on density functional theory (DFT) calculations, the exceptional regio- and stereoselectivity for this electrochemical oxidation are governed by more favorable energetics of the transition state, leading to the preferred secondary carbon radical α to the amide group and subsequent steric hindrance associated with the U-shaped conformation of the cation derived from the secondary α-carbon radical, respectively.

Analysis of electrochemical and liver microsomal transformation products of lasalocid by LC/HRMS

RATIONALE

Lasalocid (LAS), an ionophore, is used in cattle and poultry farming as feed additive for its antibiotic and growth-promoting properties. Literature on transformation products (TP) resulting from LAS degradation is limited. So far, only hydroxylation is found to occur as the metabolic reaction during the LAS degradation. To investigate potential TPs of LAS, we used electrochemistry (EC) and liver microsome (LM) assays to synthesize TPs, which were identified using liquid chromatography high-resolution mass spectrometry (LC/HRMS).

METHODS

Electrochemically produced TPs were analyzed online by direct coupling of the electrochemical cell to the electrospray ionization (ESI) source of a Sciex Triple-TOF high resolution mass spectrometer. Then, EC-treated LAS solution was collected and analyzed offline using LC/HRMS to confirm stable TPs and improve their annotation with a chemical structure due to informative MS/MS spectra. In a complementary approach, TPs formed by rat and human microsomal incubation were investigated using LC/HRMS. The resulting data were used to investigate LAS modification reactions and elucidate the chemical structure of obtained TPs.

RESULTS

The online measurements identified a broad variety of TPs, resulting from modification reactions like (de-)hydrogenation, hydration, methylation, oxidation as well as adduct formation with methanol. We consistently observed different ion complexations of LAS and LAS-TPs (Na⁺ ; 2Na⁺ K⁺ ; NaNH₄ ⁺ ; KNH₄ ⁺ ). Two stable methylated EC-TPs were found, structurally annotated, and assigned to a likely modification reaction. Using LM incubation, seven TPs were formed, mostly by oxidation/hydroxylation. After the identification of LM-TPs as Na⁺ -complexes, we identified LM-TPs as K⁺ -complexes.

CONCLUSION

We identified and characterized TPs of LAS using EC- and LM-based methods. Moreover, we found different ion complexes of LAS-based TPs. This knowledge, especially the different ion complexes, may help elucidate the metabolic and environmental degradation pathways of LAS.

Electrochemical Simulation of the Oxidative Capsaicin Metabolism

Capsaicin, primarily known as the pungent ingredient in hot peppers, is rapidly metabolized in the human body by enzymatic processes altering the pharmacological as well as toxicological properties. Herein, the oxidative transformation of capsaicin was investigated in vitro with electrochemistry as well as human liver microsomal incubations. The reaction mixtures were analyzed with liquid chromatography-mass spectrometry. Structure elucidation involved accurate mass measurements and multistage tandem mass spectrometry experiments. In total, 126 transformation products were detected. Electrochemistry provided evidence for 101 transformation products and the microsomal incubations for 46 species. 21 compounds were observed with both approaches. Identified oxidative pathways likely occurring during the phase I metabolism included dehydrogenation, O-demethylation, and hydroxylation reactions as well as combinations thereof. Furthermore, trapping of reactive intermediates either with glutathione or with electrochemically activated ribonucleosides provided evidence for the possible production of phase II metabolites and covalent adducts with a genetic material. Evidence for the occurrence of some capsaicin metabolites in humans was obtained by urine screening.

Simulation of the oxidative metabolization pattern of netupitant, an NK1 receptor antagonist, by electrochemistry coupled to mass spectrometry

Considering the frequent use of netupitant in polytherapy, the elucidation of its oxidative metabolization pattern is of major importance. However, there is a lack of published research on the redox behavior of this novel neurokinin-1 receptor antagonist. Therefore, this study was performed to simulate the intensive hepatic biotransformation of netupitant using an electrochemically driven method. Most of the known enzyme-mediated reactions occurring in the liver (i.e., N-dealkylation, hydroxylation, and N-oxidation) were successfully mimicked by the electrolytic cell using a boron-doped diamond working electrode. The products were separated by reversed-phase high-performance liquid chromatography and identified by high-resolution mass spectrometry. Aside from its ability to pinpoint formerly unknown metabolites that could be responsible for the known side effects of netupitant or connected with any new perspective concerning future therapeutic indications, this electrochemical process also represents a facile alternative for the synthesis of oxidation products for further in vitro and in vivo studies.

•

Study of the electrochemical behavior of netupitant, an NK₁ receptor antagonist.

•

Electrochemical simulation of the phase I oxidative metabolization of netupitant.

•

Identification of the generated oxidation species by LC/ESI(+)-MS.

•

Separation and identification of electrochemically generated isomers.

Development of an electrochemical flow-through cell for the fast and easy generation of isotopically labeled metabolite standards

In drug development, metabolite standards of new chemical entities are required for a comprehensive safety evaluation. Stable isotope-labeled internal metabolite standards at the milligram scale, which are difficult and expensive to synthesize in common bottom-up approaches, are necessary for metabolite quantification using liquid chromatography/mass spectrometry. A preparative electrochemical flow-through cell is presented here as a powerful tool for the cheap and straightforward synthesis of milligram amounts of isotopically labeled metabolite standards. The developed cell scales up established, so-called "coulometric" electrochemical cells. Problems like electrode fouling and cross contamination between syntheses are addressed by the use of exchangeable working electrodes. The applicability of the developed cell for the synthesis of metabolite standards is demonstrated using isotopically labeled acetaminophen as a model system for the generation of a biologically relevant phase II metabolite.

Microfluidic Electrochemistry Meets Trapped Ion Mobility Spectrometry and High-Resolution Mass Spectrometry-In Situ Generation, Separation, and Detection of Isomeric Conjugates of Paracetamol and Ethoxyquin

Over the last 3 decades, electrochemistry (EC) has been successfully applied in phase I and phase II metabolism simulation studies. The electrochemically generated phase I metabolite-like oxidation products can react with selected reagents to form phase II conjugates. During conjugate formation, the generation of isomeric compounds is possible. Such isomeric conjugates are often separated by high-performance liquid chromatography (HPLC). Here, we demonstrate a powerful approach that combines EC with ion mobility spectrometry to separate possible isomeric conjugates. In detail, we present the hyphenation of a microfluidic electrochemical chip with an integrated mixer coupled online to trapped ion mobility spectrometry (TIMS) and time-of-flight high-resolution mass spectrometry (ToF-HRMS), briefly chipEC-TIMS-ToF-HRMS. This novel method achieves results in several minutes, which is much faster than traditional separation approaches like HPLC, and was applied to the drug paracetamol and the controversial feed preservative ethoxyquin. The analytes were oxidized in situ in the electrochemical microfluidic chip under formation of reactive intermediates and mixed with different thiol-containing reagents to form conjugates. These were analyzed by TIMS-ToF-HRMS to identify possible isomers. It was observed that the oxidation products of both paracetamol and ethoxyquin form two isomeric conjugates, which are characterized by different ion mobilities, with each reagent. Therefore, using this hyphenated technique, it is possible to not only form reactive oxidation products and their conjugates in situ but also separate and detect these isomeric conjugates within only a few minutes.

A preliminary metabolites identification of a novel compound with β-adrenolytic activity

BACKGROUND

The identification of main metabolites and assessment of renal excretion of a novel compound with β-adrenolytic activity (2RS)-1-(1H-indol-4-yloxy)-3-((2-(2-methoxyphenoxy)ethyl)amino)propan-2-ol, briefly called (RS)-9 or 2F109, were studied in vivo in rat serum, urine, faeces, liver, intestine, lungs and kidneys, and in vitro in rat liver microsomes.

METHODS

Structures of the metabolites have been developed by comparing the high-resolution product ion mass spectra of metabolites and the parent compound based on the differences in mass values of main fragments. Quantitative analysis of (RS)-9 was done using a system of liquid chromatography coupled with a triple quadrupole mass spectrometer API 2000. Identification studies of predicted metabolites were made by a high-resolution mass spectrometer LTQ XL Orbitrap Discovery and using a Roxy^™ system, for online electrochemical mimicry of oxidative metabolism by cytochrome P450s connected to QTRAP 5500.

RESULTS

For (RS)-9 (m/z 357.2084) phase I metabolites derived from oxidation process: hydroxyl derivatives (m/z 373.2470) and dihydroxyl derivatives (m/z 389.4318), and phase II metabolites: N-methylated compound (m/z 371.1612), O-glucuronide (m/z 533.5118), and sulfate (m/z 437.2350) were identified.

CONCLUSION

(RS)-9 was extensively metabolised to several phase I and II metabolites, and renal excretion was a minor route in its elimination.

Reactive Metabolites: Generation and Estimation with Electrochemistry Based Analytical Strategy as an Emerging Screening Tool

Background:

Analytical scientists have constantly been in search for more efficient and economical methods for drug simulation studies. Owing to great progress in this field, there are various techniques available nowadays that mimic drug metabolism in the hepatic microenvironment. The conventional in vitro and in vivo studies pose inherent methodological drawbacks due to which alternative analytical approaches are devised for different drug metabolism experiments.

Methods:

Electrochemistry has gained attention due to its benefits over conventional metabolism studies. Because of the protein binding nature of reactive metabolites, it is difficult to identify them directly after formation, although the use of trapping agents aids in their successful identification. Furthermore, various scientific reports confirmed the successful simulation of drug metabolism studies by electrochemical cells. Electrochemical cells coupled with chromatography and mass spectrometry made it easy for direct detection of reactive metabolites. In this review, an insight into the application of electrochemical techniques for metabolism simulation studies has been provided. The sole use of electrochemical cells, as well as their setups on coupling to liquid chromatography and mass spectrometry has been discussed. The importance of metabolism prediction in early drug discovery and development stages along with a brief overview of other conventional methods has also been highlighted.

Conclusion:

To the best of our knowledge, this is the first article to review the electrochemistry based strategy for the analysis of reactive metabolites. The outcome of this ‘first of its kind’ review will significantly help the researchers in the application of electrochemistry based bioanalysis for metabolite detection.

Abiotic and biotic transformation of torasemide - Occurrence of degradation products in the aquatic environment

The pharmaceutical torasemide is an important loop diuretic and was 2017 one of the ten most prescribed drugs in Germany. Despite its detection in different compartments of the urban water cycle including drinking water, no studies were so far performed to elucidate its fate in the environment and the occurrence of transformation products (TPs). Therefore, we investigated the phototransformation, microbial degradation, transformation with human liver microsomes and anodic oxidation of torasemide to obtain good coverage of environmentally relevant degradation products. Overall sixteen products were identified, covering the following reaction mechanisms: aromatic and aliphatic hydroxylation, including further oxidation to carboxylic acids and quinone imines, amide cleavage, N-dealkylation, N-dearylation, and sulfonamide hydrolysis to sulfonic acids. Especially the formation of quinone imines could be of concern as they are highly reactive electrophiles. Torasemide itself was observed in all investigated wastewater treatment plant (WWTP) samples and wastewater-impacted surface waters. The maximum detected concentration was about 350 ng L^-1. Only three of the sixteen transformation products were generally observed in at least one of the samples and the most frequently detected TPs were the human metabolites hydroxytorasemide (TP 364a) and carboxytorasemide (TP 378a). The complete removal of TP 364a during wastewater treatment was in agreement with the results of microbial degradation experiments. TP 364a was most likely transformed into TP 378a, which was microbially less degraded in lab experiments. Based on estimated concentrations, TP 378a could reach about 1 μg L^-1 in the investigated wastewater matrices.

Charged Tags for the Identification of Oxidative Drug Metabolites Based on Electrochemistry and Mass Spectrometry

Most of the active pharmaceutical ingredients like Metoprolol are oxidatively metabolized by liver enzymes, such as Cytochrome P450 monooxygenases into oxygenates and therefore hydrophilic products. It is of utmost importance to identify the metabolites and to gain knowledge on their toxic impacts. By using electrochemistry, it is possible to mimic enzymatic transformations and to identify metabolic hot spots. By introducing charged-tags into the intermediate, it is possible to detect and isolate metabolic products. The identification and synthesis of initially oxidized metabolites are important to understand possible toxic activities. The gained knowledge about the metabolism will simplify interpretation and predictions of metabolitic pathways. The oxidized products were analyzed with high performance liquid chromatography-mass spectrometry using electrospray ionization (HPLC-ESI-MS) and nuclear magnetic resonance (NMR) spectroscopy. For proof-of-principle, we present a synthesis of one pyridinated main oxidation product of Metoprolol.

Electrocatalytic Behavior and Determination of Amitriptyline Drug with MWCNT@Celllulose Composite Modified Glassy Carbon Electrode

A novel nanocomposite of cellulose based on multiwalled carbon nanotube (MWCNT) was synthesized by a simple solution mixing–evaporation method. The morphology, thermal investigations, electrocatalytic oxidation of amitriptyline were analyzed at multi-walled carbon/cellulose nanocomposite in detail. The amitriptyline (AMT) drug was electrochemically studied in a phosphate buffer at different pH using the MWCNT/cellulose modified glassy carbon electrode (GCE). As per the linear relationship among AMT along with peak current, differential pulse voltammetry technique has been established for their quantitative pharmaceutical’s determination. The oxidation potential shifted negatively compared to GCE, showing that the MWCNT/cellulose modified electrode had an excellent catalytic activity for the AMT oxidation. The anodic peak current varied linear response with AMT’s concentration in the range of 0.5 to 20.0 μM with a LOD of 0.0845 μM and LOQ of 0.282 μM, respectively. The proposed method was effectively put on the determination of AMT in pharmaceutical and urine samples. This novel methodology is presented here as an example of a complete development methodology for the determination of amitriptyline drug and sensor for use in healthcare fields.

Oxidative metabolism of typical phenolic compounds of Danshen by electrochemistry coupled to quadrupole time-of-flight tandem mass spectrometry

An electrochemistry coupled to online quadrupole time-of-flight tandem mass spectrometry (EC/Q-TOF/MS) was applied to investigate the oxidative transformation and metabolic pathway of five phenolic acids in Danshen sample. Simulation of the phase I oxidative metabolism was carried out in an electrochemical reactor equipped with a glassy carbon working electrode. The phase II reactivity of the generated oxidative products towards biomolecules (such as glutathione) was investigated by ways of covalent adduct formation experiments. The results obtained by EC/MS were compared with well-known in vitro studies by conducting rat liver microsome incubations. Structures of the electrochemically produced metabolites were identified by accurate mass measurement and previously results in vivo metabolites. It was indicated that the electrochemical oxidation was in good accordance with similar products found in vivo experiments. In conclusion, this work confirmed that EC/Q-TOF/MS was a promising analytical tool in the prediction of metabolic transformations of functional foods.

Identification of transformation products of denatonium - Occurrence in wastewater treatment plants and surface waters

Denatonium, one of the bitterest substances known to man, was recently identified as wastewater borne micropollutant in surface waters. Therefore, photodegradation experiments and electrochemical degradation were performed to identify abiotic and putative biotic transformation products (TPs). Indirect rather than direct photodegradation proved to be important for denatonium removal by solar irradiation and produced seven TPs. Amide hydrolysis, hydroxylation, N-dealkylation, and N-dearylation were revealed as the main mechanisms. Anodic oxidation of denatonium was related to the formation of overall ten products and despite considerable different yields, all TPs from indirect photodegradation were mimicked electrochemically. Among them, lidocaine was the only TP detected after conventional wastewater treatment and in surface waters. The occurrence of lidocaine was however associated with its application as local anesthetic rather than to a degradation of denatonium. The absence of additional products suggests that denatonium degradation is negligible under environmental conditions, supporting the previously described persistent nature of this compound. Advanced water treatment techniques however have the potential to degrade denatonium. About 74% of the initial denatonium load was removed from wastewater during pilot-scale ozonation. The degradation of denatonium was accompanied here with the formation of at least two polar products, which are passing unchanged through a sand filter after ozonation. Both substances have completely unknown (toxicological) properties and this study seems to be the first report about their structures in general, as none of them was found in any of the large compound libraries (e.g. PubChem).

Electrochemical simulation of metabolism for antitumor-active imidazoacridinone C-1311 and in silico prediction of drug metabolic reactions

The metabolism of antitumor-active 5-diethylaminoethylamino-8-hydroxyimidazoacridinone (C-1311) has been investigated widely over the last decade but some aspects of molecular mechanisms of its metabolic transformation are still not explained. In the current work, we have reported a direct and rapid analytical tool for better prediction of C-1311 metabolism which is based on electrochemistry (EC) coupled on-line with electrospray ionization mass spectrometry (ESI-MS). Simulation of the oxidative phase I metabolism of the compound was achieved in a simple electrochemical thin-layer cell consisting of three electrodes (ROXY^™, Antec Leyden, the Netherlands). We demonstrated that the formation of the products of N-dealkylation reactions can be easily simulated using purely instrumental approach. Newly reported products of oxidative transformations like hydroxylated or oxygenated derivatives become accessible. Structures of the electrochemically generated metabolites were elucidated on the basis of accurate mass ion data and tandem mass spectrometry experiments. In silico prediction of main sites of C-1311 metabolism was performed using MetaSite software. The compound was evaluated for cytochrome P450 1A2-, 3A4-, and 2D6-mediated reactions. The results obtained by EC were also compared and correlated with those of reported earlier for conventional in vitro enzymatic studies in the presence of liver microsomes and in the model peroxidase system. The in vitro experimental approach and the in silico metabolism findings showed a quite good agreement with the data from EC/ESI-MS analysis. Thus, we conclude here that the electrochemical technique provides the promising platform for the simple evaluation of drug metabolism and the reaction mechanism studies, giving first clues to the metabolic transformation of pharmaceuticals in the human body.

Mass spectrometry-based intraoperative tumor diagnostics

In surgical oncology, decisions regarding the amount of tissue to be removed can have important consequences: the decision between preserving sufficient healthy tissue and eliminating all tumor cells is one to be made intraoperatively. This review discusses the latest technical innovations for a more accurate tumor margin localization based on mass spectrometry. Highlighting the latest mass spectrometric inventions, real-time diagnosis seems to be within reach; focusing on the intelligent knife, desorption electrospray ionization, picosecond infrared laser and MasSpec pen, the current technical status is evaluated critically concerning its scientific and medical practice.

Phase I and phase II metabolism simulation of antitumor-active 2-hydroxyacridinone with electrochemistry coupled on-line with mass spectrometry

Here, we report the metabolic profile and the results of associated metabolic studies of 2-hydroxy-acridinone (2-OH-AC), the reference compound for antitumor-active imidazo- and triazoloacridinones. Electrochemistry coupled with mass spectrometry was applied to simulate the general oxidative metabolism of 2-OH-AC for the first time. The reactivity of 2-OH-AC products to biomolecules was also examined. The usefulness of the electrochemistry for studying the reactive drug metabolite trapping (conjugation reactions) was evaluated by the comparison with conventional electrochemical (controlled-potential electrolysis) and enzymatic (microsomal incubation) approaches. 2-OH-AC oxidation products were generated in an electrochemical thin-layer cell. Their tentative structures were assigned based on tandem mass spectrometry in combination with accurate mass measurements. Moreover, the electrochemical conversion of 2-OH-AC in the presence of reduced glutathione and/or N-acetylcysteine unveiled the formation of reactive metabolite-nucleophilic trapping agent conjugates (m/z 517 and m/z 373, respectively) through the thiol group. This glutathione S-conjugate was also identified after electrolysis experiment as well as was detected in liver microsomes. Summing up, the present work illustrates that the electrochemical simulation of metabolic reactions successfully supports the results of classical electrochemical and enzymatic studies. Therefore, it can be a useful tool for synthesis of drug metabolites, including reactive metabolites.

Understanding the metabolism of the anticancer drug Triapine: electrochemical oxidation, microsomal incubation and in vivo analysis using LC-HRMS

α-N-Heterocyclic thiosemicarbazones are among the most promising ribonucleotide reductase inhibitors identified so far. Triapine, the most prominent representative of this class of substances, has been investigated in multiple phase I and II clinical trials. With regard to clinical practice, Triapine showed activity against hematological diseases, but ineffectiveness against a variety of solid tumors. However, the reasons are still vague and the amount of ADME (absorption, distribution, metabolism and excretion) data for Triapine available in the literature is very limited. Therefore, different analytical tools were used to investigate the metabolism of Triapine including electrochemical oxidations, liver microsomes and in vivo samples from mice. The main metabolic reactions, observed by all three methods, were dehydrogenation and hydroxylations, confirming that electrochemistry, as a purely instrumental approach, can be applied for the simulation of metabolic pathways. The dehydrogenated metabolite M1 was identified as a thiadiazole ring-closed oxidation product of Triapine. From a biological point of view, M1, as a key metabolite, is of interest since the crucial chemical property of α-N-heterocyclic thiosemicarbazones to bind metal ions is lost and cytotoxicity studies showed no anticancer activity of M1. The in vivo data of the urine samples revealed very high levels of the metabolites and Triapine itself already 15 min after treatment. This clearly indicates that Triapine is rapidly metabolised and excreted, which represents an important step forward to understand the possible reason for the inefficiency of Triapine against solid tumors.

Transformation of oxytetracycline by redox-active Fe(III)- and Mn(IV)-containing minerals: Processes and mechanisms

Abiotic mechanisms of oxytetracycline degradation by redox-active minerals, Fe(III)-saturated montmorillonite (Fe-SWy) and birnessite (δ-MnO₂), were studied to better understand the environmental behavior of tetracycline antibiotics in aqueous systems. Kinetics of dissipation (adsorption, oxidation and formation of transformation products (TPs)), was investigated up to 7 days, and reaction mechanisms were elucidated based on identification of TPs by liquid chromatography mass spectrometry. Oxytetracycline was completely removed from solution by both minerals, however kinetics, TPs and mechanisms were distinct for each mineral. Oxytetracycline oxidation by δ-MnO₂ occurred within minutes; 54 identified TPs were detected only in solution, most of them exhibited decreasing levels with time. In contrast, oxytetracycline was completely adsorbed by Fe-SWy, its degradation was slower, only 29 TPs were identified, among them 13 were surface-bound, and most of the TPs accumulated in the system with time. Oxytetracycline transformation by δ-MnO₂ involved radicals, as was proven by electrochemical degradation. Reductive dissolution was observed for both minerals. X-ray photoelectron spectroscopy demonstrated accumulation of Fe(II) on Fe-SWy surface, whereas Mn(II) was primarily released from δ-MnO₂ surface. Highly oxidized carbon species (i.e., newly formed TPs) were observed on the surface of both minerals interacting with oxytetracycline. This study demonstrates the impact of structure and reactivity of redox-active minerals on removal and decomposition of tetracycline antibiotics in aqueous systems.

On-line electrochemistry/electrospray ionization mass spectrometry (EC-ESI-MS) system for the study of nucleosides and nucleotides oxidation products

The main aim of present investigation was to study the oxidation products of nucleosides and nucleotides with the use of on-line electrochemistry/electrospray ionization mass spectrometry (EC-ESI-MS) system. The conditions applied in the system were optimized in complex manner, involving study of the impact of working electrodes or sample solvent on the oxidation of tested compounds and their ionization in mass spectrometry. Finally 5 mM of ammonium acetate was used selected and pH 3 was used for positive ionization mode, while pH 7 was applied for negative ionization in mass spectrometry. It was shown that utilization of both ionization modes is indispensable in order to detect and identify all of oxidation products. Furthermore the identification of compounds obtained using the EC-ESI-MS system was done and results were compared with known metabolites of studied compounds. These products are associated with specific disease states, or may be a potential metabolites. Moreover the analysis of urine samples by liquid chromatography coupled with mass spectrometry confirmed the possibility of using EC-ESI-MS technique to simulate the metabolism of nucleosides and nucleotides, since the oxidation products have also been identified in urine samples.

Prediction of biotransformation products of the fungicide fluopyram by electrochemistry coupled online to liquid chromatography-mass spectrometry and comparison with in vitro microsomal assays

Biotransformation processes of fluopyram (FLP), a new succinate dehydrogenase inhibitor (SDHI) fungicide, were investigated by electrochemistry (EC) coupled online to liquid chromatography (LC) and electrospray mass spectrometry (ESI-MS). Oxidative phase I metabolite production was achieved using an electrochemical flow-through cell equipped with a boron-doped diamond (BDD) electrode. Structural elucidation and prediction of oxidative metabolism pathways were assured by retention time, isotopic patterns, fragmentation, and accurate mass measurements using EC/LC/MS, LC-MS/MS, and/or high-resolution mass spectrometry (HRMS). The results obtained by EC were compared with conventional in vitro studies by incubating FLP with rat and human liver microsomes (RLM, HLM). Known phase I metabolites of FLP (benzamide, benzoic acid, 7-hydroxyl, 8-hydroxyl, 7,8-dihydroxyl FLP, lactam FLP, pyridyl acetic acid, and Z/E-olefin FLP) were successfully simulated by EC/LC/MS. New metabolites including an imide, hydroxyl lactam, and 7-hydroxyl pyridyl acetic acid oxidative metabolites were predicted for the first time in our study using EC/LC/MS and liver microsomes. We found oxidation by dechlorination to be one of the major metabolism mechanisms of FLP. Thus, our results revealed that EC/LC/MS-based metabolic elucidation was more advantageous on time and cost of analysis and enabled matrix-free detection with valuable information about the mechanisms and intermediates of metabolism processes. Graphical abstract Oxidative metabolism of fluopyram.

Hydroxylation and dimerization of zearalenone: comparison of chemical, enzymatic and electrochemical oxidation methods

Investigations of the metabolic pathway of mycotoxins by microsomal techniques are often laborious, causing an increasing demand for easy and rapid simulation methods. Thus, the non-microsomal oxidation technique of electrochemistry coupled online to mass spectrometry (EC/MS) was applied to simulate phase I biotransformation of the Fusarium mycotoxin zearalenone (ZEA). The obtained transformation products were identified by high resolution mass spectrometry (FT-ICR) and HPLC-MS/MS. Transformation products (TPs) from EC/MS were compared to those of other oxidative methods, such as Fenton-like and Ce(IV) reactions and metabolites derived from in vitro assays (human and rat liver microsomes). Electrochemical oxidisation of ZEA was achieved by applying a potential between 0 and 2,500 mV vs Pd/H2 using a flow-through cell with a boron-doped diamond working electrode. Several mono-hydroxylated TPs were generated by EC/MS and Fenton-like reaction, which could also be found in microsomal in vitro assays. EC and Ce(IV) led to the formation of structurally different ZEA dimers and dimeric quinones probably connected over covalent biaryl C-C and C-O-C bonds. Although the dimerization of phenolic compounds is often observed in natural processes, ZEA dimers have not yet been reported. This is the first report on the formation of stable ZEA dimers and their related quinones. The tested non-microsomal methods, in particular EC/MS, could be useful in order to predict the biotransformation products of mycotoxins, even in cases where one to one simulation is not always feasible.

TiO2 Photocatalysis-DESI-MS Rotating Array Platform for High-Throughput Investigation of Oxidation Reactions

We present a new high-throughput platform for studying titanium dioxide (TiO₂) photocatalytic oxidation reactions by performing reactions on a TiO₂-coated surface, followed by direct analysis of oxidation products from the surface by desorption electrospray ionization mass spectrometry (DESI-MS). For this purpose, we coated a round glass wafer with photocatalytically active anatase-phase TiO₂ using atomic layer deposition. Approximately 70 aqueous 1 μL samples can be injected onto the rim of the TiO₂-coated glass wafer, before the entire wafer is exposed to UV irradiation. After evaporation of water, the oxidation products can be directly analyzed from the sample spots by DESI-MS, using a commercial rotating sample platform. The method was shown to provide fast photocatalytic oxidation reactions and analysis with throughput of about four samples per minute. The feasibility of the method was examined for mimicking phase I metabolism reactions of amodiaquine, buspirone and verapamil. Their main photocatalytic reaction products were mostly similar to the products observed earlier in TiO₂ photocatalysis and in in vitro phase I metabolism assays performed using human liver microsomes.

Instrumentation and applications of electrochemistry coupled to mass spectrometry for studying xenobiotic metabolism: A review

The knowledge of metabolic pathways and biotransformation of xenobiotics, artificial substances foreign to the entire biological system, is crucial for elucidation of degradation routes of potentially toxic substances. Nowadays, there are many methods to simulate xenobiotic metabolism in the human body in vitro. In this review, the metabolism of various substances in the human body is described, followed by a summary of methods used for prediction of metabolic pathways and biotransformation. Above all, focus is placed on the coupling of electrochemistry to mass spectrometry, which is still a relatively new technique. This promising tool can mimic both oxidative phase I and conjugative phase II metabolism. Different experimental arrangements, with or without a separation step, and various applications of this technique are illustrated and critically reviewed.

Laccase- and electrochemically mediated conversion of triclosan: Metabolite formation and influence on antibacterial activity

Metabolite formation from radical-based oxidation of the environmental pollutant triclosan (TCS) was compared using an ascomycete (Phoma sp. UHH 5-1-03) and a basidiomycete (Trametes versicolor) laccase, laccase-redox mediator systems, and electrochemical oxidation (EC). Laccase oxidation predominantly yielded TCS di- and trimers, but notably also caused TCS ether bond cleavage. The latter was more prominent during EC-catalysed TCS oxidation, which generally resulted in a broader and more divergent product spectrum. By contrast, only quantitative but not qualitative differences in TCS metabolite formation were observed for the two laccases. Application of the presumable natural laccase redox mediator syringaldehyde (SYD) shifted the TCS-transforming reactions of laccase systems from oligomerization more towards ether bond cleavage. However, the observed rapid removal of SYD from reaction systems caused by predominant adduct formation from SYD and TCS, and concomitant conversion of SYD into 2,6-dimethoxy-1,4-benzoquinone (DMBQ) clearly demonstrates that SYD does not function as a "true" laccase redox mediator in the sense of being recycled during TCS oxidation. Laccase treatment of TCS without SYD decreased the anti-bacterial TCS activity more than treatment employing SYD in addition, indicating that SYD and/or its transformation products contribute to bacterial toxicity. DMBQ was found to be about 80% more active in a bacterial growth inhibition test than its parent compound SYD in terms of IC₂₀ values. These observations establish DMBQ as a potential cause of toxicity effects of SYD-laccase systems. They further illustrate that a natural origin of a redox mediator does not automatically qualify its use as environmentally benign or non-hazardous.

Comparison of in Silico, Electrochemical, in Vitro and in Vivo Metabolism of a Homologous Series of (Radio)fluorinated σ1 Receptor Ligands Designed for Positron Emission Tomography

The imaging of σ₁ receptors in the brain by fluorinated radiotracers will be used for the validation of σ₁ receptors as drug targets as well as for differential diagnosis of diseases in the central nervous system. The biotransformation of four homologous fluorinated PET tracers 1'-benzyl-3-(ω-fluoromethyl to ω-fluorobutyl)-3H-spiro[2]benzofuran-1,4'-piperidine] ([¹⁸ F]1-4) was investigated. In silico studies using fast metabolizer (FAME) software, electrochemical oxidations, in vitro studies with rat liver microsomes, and in vivo metabolism studies after application of the PET tracers [¹⁸ F]1-4 to mice were performed. Combined liquid chromatography and mass spectrometry (HPLC-MS) analysis allowed structural identification of non-radioactive metabolites. Radio-HPLC and radio-TLC provided information about the presence of unchanged parent radiotracers and their radiometabolites. Radiometabolites were not found in the brain after application of [¹⁸ F]2-4, but liver, plasma, and urine samples contained several radiometabolites. Less than 2 % of the injected dose of [¹⁸ F]4 reached the brain, rendering [¹⁸ F]4 less appropriate as a PET tracer than [¹⁸ F]2 and [¹⁸ F]3. Compounds [¹⁸ F]2 and [¹⁸ F]3 possess the most promising properties for imaging of σ₁ receptors in the brain. High σ₁ affinity (K_i =0.59 nm), low lipophilicity (logD_7.4 =2.57), high brain penetration (4.6 % of injected dose after 30 min), and the absence of radiometabolites in the brain favor the fluoroethyl derivative [¹⁸ F]2 slightly over the fluoropropyl derivative [¹⁸ F]3 for human use.

Development and Applications of Liquid Sample Desorption Electrospray Ionization Mass Spectrometry

Desorption electrospray ionization mass spectrometry (DESI-MS) is a recent advance in the field of analytical chemistry. This review surveys the development of liquid sample DESI-MS (LS-DESI-MS), a variant form of DESI-MS that focuses on fast analysis of liquid samples, and its novel analy-tical applications in bioanalysis, proteomics, and reaction kinetics. Due to the capability of directly ionizing liquid samples, liquid sample DESI (LS-DESI) has been successfully used to couple MS with various analytical techniques, such as microfluidics, microextraction, electrochemistry, and chromatography. This review also covers these hyphenated techniques. In addition, several closely related ionization methods, including transmission mode DESI, thermally assisted DESI, and continuous flow-extractive DESI, are briefly discussed. The capabilities of LS-DESI extend and/or complement the utilities of traditional DESI and electrospray ionization and will find extensive and valuable analytical application in the future.