Evaluation of amine- and amide-terminated self-assembled monolayers as ?Molecular glues? for Au and SiO2 substrates

IrIII-Catalyzed direct syntheses of amides and esters using nitriles as acid equivalents: a photochemical pathway

An unprecedented Ir^III[df(CF₃)ppy]₂(dtbbpy)PF₆-catalyzed simple photochemical process for direct addition of amines and alcohols to the relatively less reactive nitrile triple bond is described herein.

On-Demand Electrical Switching of Antibody-Antigen Binding on Surfaces

The development of stimuli-responsive interfaces between synthetic materials and biological systems is providing the unprecedented ability to modulate biomolecular interactions for a diverse range of biotechnological and biomedical applications. Antibody-antigen binding interactions are at the heart of many biosensing platforms, but no attempts have been made yet to control antibody-antigen binding in an on-demand fashion. Herein, a molecular surface was designed and developed that utilizes an electric potential to drive a conformational change in surface bound peptide moiety, to give on-demand control over antigen-antibody interactions on sensor chips. The molecularly engineered surfaces allow for propagation of conformational changes from the molecular switching unit to a distal progesterone antigen, resulting in promotion (ON state) or inhibition (OFF state) of progesterone antibody binding. The approach presented here can be generally applicable to other antigen-antibody systems and meets the technological needs for in situ long-term assessment of biological processes and disease monitoring on-demand.

Effective Approach for Increasing the Heteroatom Doping Levels of Porous Carbons for Superior CO2 Capture and Separation Performance

Development of efficient sorbents for carbon dioxide (CO₂) capture from flue gas or its removal from natural gas and landfill gas is very important for environmental protection. A new series of heteroatom-doped porous carbon was synthesized directly from pyrazole/KOH by thermolysis. The resulting pyrazole-derived carbons (PYDCs) are highly doped with nitrogen (14.9-15.5 wt %) as a result of the high nitrogen-to-carbon ratio in pyrazole (43 wt %) and also have a high oxygen content (16.4-18.4 wt %). PYDCs have a high surface area (SA_BET = 1266-2013 m² g^-1), high CO₂ Q_st (33.2-37.1 kJ mol^-1), and a combination of mesoporous and microporous pores. PYDCs exhibit significantly high CO₂ uptakes that reach 2.15 and 6.06 mmol g^-1 at 0.15 and 1 bar, respectively, at 298 K. At 273 K, the CO₂ uptake improves to 3.7 and 8.59 mmol g^-1 at 0.15 and 1 bar, respectively. The reported porous carbons also show significantly high adsorption selectivity for CO₂/N₂ (128) and CO₂/CH₄ (13.4) according to ideal adsorbed solution theory calculations at 298 K. Gas breakthrough studies of CO₂/N₂ (10:90) at 298 K showed that PYDCs display excellent separation properties. The ability to tailor the physical properties of PYDCs as well as their chemical composition provides an effective strategy for designing efficient CO₂ sorbents.

Molecular Understanding on the Underwater Oleophobicity of Self-Assembled Monolayers: Zwitterionic versus Nonionic

Molecular dynamics simulations are conducted to investigate the underwater oleophobicity of self-assembled monolayers (SAMs) with different head groups. Simulation results show that the order of underwater oleophobicity of SAMs is methyl < amide < oligo(ethylene glycol) (OEG) < ethanolamine (ETA) < hydroxyl < mixed-charged zwitterionic. The underwater-oil contact angles (OCAs) are <133° for all nonionic hydrophilic SAMs, while the mixed-charged zwitterionic SAMs are underwater superoleophobic (OCA can reach 180°). It appears that surfaces with stronger underwater oleophobicity have better antifouling performance. Further study on the effect of different alkyl ammonium ions on mixed-charged SAMs reveals that the underwater OCAs are >143.6° for all SAMs; mixed-charged SAMs containing primary alkyl ammonium ion are likely to possess the best underwater oleophobicity for its strong hydration capacity. It seems that alkyl sulfonate anion (SO₃^-) is more hydrophilic than alkyl trimethylammonium ion (NC₃⁺) for the hydrophobic methyl groups on nitrogen atoms and that the hydration of SO₃^- in mixed-charged SAMs can be seriously blocked by NC₃⁺. The monomer of SO₃^- should be slightly longer than that of NC₃⁺ to obtain better underwater oleophobicity in NC₃⁺-/SO₃^--SAMs. In addition, the underwater oleophobicity of SAMs might become worse at low grafting densities. This work systematically proves that a zwitterionic surface is more underwater oleophobic than a nonionic surface. These results will help for the design and development of superoleophobic surfaces.

Polyviologen synthesis by self-assembly assisted grafting

In this work a new linker molecule with isothiocyanate and cyanopyridine groups (SCNCP) has been synthesized and the electrochemical synthesis of a polyviologen derivative using a linear cyanopyridine monomer (LCP) to this SCNCP was studied.

Switching specific biomolecular interactions on surfaces under complex biological conditions

Herein, electrically switchable mixed self-assembled monolayers based on oligopeptides have been developed and investigated for their suitability in achieving control over biomolecular interactions in the presence of complex biological conditions. Our model system, a biotinylated oligopeptide tethered to gold within a background of tri(ethylene glycol) undecanethiol, is ubiquitous in both switching specific protein interactions in highly fouling media while still offering the non-specific protein-resistance to the surface. Furthermore, the work demonstrated that the performance of the switching on the electro-switchable oligopeptide is sensitive to the characteristics of the media, and in particular, its protein concentration and buffer composition, and thus such aspects should be considered and addressed to assure maximum switching performance. This study lays the foundation for developing more realistic dynamic extracellular matrix models and is certainly applicable in a wide variety of biological and medical applications.

Electrically-driven modulation of surface-grafted RGD peptides for manipulation of cell adhesion

Reported herein is a switchable surface that relies on electrically-induced conformational changes within surface-grafted arginine–glycine–aspartate (RGD) oligopeptides as the means of modulating cell adhesion.

Reported herein is a switchable surface that relies on electrically-induced conformational changes within surface-grafted arginine–glycine–aspartate (RGD) oligopeptides as the means of modulating cell adhesion.

Cyclodextrin-functionalized chromatographic materials tailored for reversible adsorption

Novel dendronized silica substrates were synthesized. First- and second- generation polyaryl ether dendrons were appended to silica surfaces. Using Cu(I) mediated cycloaddition "click" chemistry, β-cyclodextrin was tethered to the dendronized surfaces and to a nondendronized surface for comparison purposes. This synthesis strategy affords a modular, versatile method for surface functionalization in which the density of functional groups can be readily varied by changing the generation of dendron used. The surfaces, which are capable of adsorbing target analytes, have been characterized and studied using X-ray photoelectron spectroscopy (XPS) and vibrational sum frequency spectroscopy (VSFS). Fluorescence spectroscopy was used to study the surfaces' ability to retain coumarin 152 (C152). These studies indicated that the β-cyclodextrin functionalized surfaces not only adsorbed C152 but also retained it through multiple aqueous washes. Furthermore, these observations were quantified and show that substrates functionalized with first-generation dendrons have a more than 6 times greater capacity to adsorb C152 than slides functionalized with monomeric β-cyclodextrin. The first-generation dendrons also have 2 times greater the capacity than the larger generation dendrons. This result is explained by describing a dendron that has an increased number of β-cyclodextrin monomers but, when covalently bound to silica, has a footprint too large to optimize the number of accessible monomers. Overall, both dendronized surfaces demonstrated an increased capacity to adsorb targeted analytes over the slides functionalized with monomeric β-cyclodextrin. The studies reported provide a methodology for characterizing and evaluating the properties of novel, highly functional surfaces.

Formation of carboxy- and amide-terminated alkyl monolayers on Silicon(111) investigated by ATR-FTIR, XPS, and X-ray scattering: construction of photoswitchable surfaces

We have prepared high-quality, densely packed, self-assembled monolayers (SAMs) of carboxy-terminated alkyl chains on Si(111). The samples were made by thermal grafting of methyl undec-10-enoate under an inert atmosphere and subsequent cleavage of the ester functionality to disclose the carboxylic acid end-group. X-ray photoelectron spectroscopy (XPS) and grazing incidence X-ray diffraction (GIXD) indicate a surface coverage of about 50% of the initially H-terminated sites. In agreement, GIXD implies a rectangular unit mesh of 6.65 and 7.68 Å side lengths, containing two molecules in a regular zigzag-like substitution pattern for the ester- and carboxy-terminated monolayer. Hydrolysis of the remaining H-Si(111) bonds at the surface furnished HO-Si(111) groups according to XPS and attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) studies. The amide-terminated alkyl SAM on Si(111) assembled in a 2-(6-chloro-1H-benzotriazol-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate (HCTU)-mediated one-pot coupling reaction under an inert atmosphere, whereby the active ester forms in situ prior to the reaction with an amino-functionalized photoswitchable fulgimide. ATR-FTIR and XPS studies of the fulgimide samples revealed closely covered amide-terminated SAMs. Reversible photoswitching of the headgroup was read out by applying XPS, ATR-FTIR, and difference absorption spectra in the mid-IR. In XPS, we observed a reversible breathing of the amide/imide C1s and N1s signals of the fulgimide. The results demonstrate the general suitability of HCTU as a reagent for amide couplings to carboxy-terminated alkyl SAMs and the on-chip functionalization toward photoswitchable Si(111) surfaces.

Cell patterning using a template of microstructured organosilane layer fabricated by vacuum ultraviolet light lithography

Micropatterning techniques have become increasingly important in cellular biology. Cell patterning is achieved by various methods. Photolithography is one of the most popular methods, and several light sources (e.g., excimer lasers and mercury lamps) are used for that purpose. Vacuum ultraviolet (VUV) light that can be produced by an excimer lamp is advantageous for fabricating material patterns, since it can decompose organic materials directly and efficiently without photoresist or photosensitive materials. Despite the advantages, applications of VUV light to pattern biological materials are few. We have investigated cell patterning by using a template of a microstructured organosilane layer fabricated by VUV lithography. We first made a template of a microstructured organosilane layer by VUV lithography. Cell adhesive materials (poly(d-lysine) and polyethyleneimine) were chemically immobilized on the organosilane template, producing a cell adhesive material pattern. Primary rat cardiac and neuronal cells were successfully patterned by culturing them on the pattern substrate. Long-term culturing was attained for up to two weeks for cardiac cells and two months for cortex cells. We have discussed the reproducibility of cell patterning and made suggestions to improve it.

Dextran Grafted Silicon Substrates: Preparation, Characterization And Biomedical Applications

Biodevices used in the cardiovascular system suffer from well-known problems associated with surface-induced gas embolism and thrombosis. In order to improve the biocompatibility of these devices, biomimetic coatings show good promise. We recently synthesized a coating layer of dextran, a relatively simple and well characterized neutral polysaccharide, with the purpose of mimicking the cells' glycocalyx layer, that prevents non-specific cells-protein interactions. Systematic physical chemical characterization was performed on coatings obtained both from commonly used polydisperse dextrans and low-dispersity dextrans in the 1-100 kDalton molecular weight range.

We have combined standard surface analysis techniques, such as ellipsometry, contact angle measurements and AFM, with less traditional vibrational spectroscopy techniques in the characterization of our biomimetic coatings. FTIR, micro-FTIR and micro-Raman spectroscopies were utilized to correlate the conformational and molecular aspects of the grafted poly- and monodisperse dextran chains to their attractive biological properties.

Investigations of chemical modifications of amino-terminated organic films on silicon substrates and controlled protein immobilization

Fourier transform infrared spectroscopy by grazing-angle attenuated total reflection (FTIR-GATR), ellipsometry, atomic force microscopy (AFM), UV-visible spectroscopy, and fluorescence microscopy were employed to investigate chemical modifications of amino-terminated organic thin films on silicon substrates, protein immobilization, and the biological activity and hydrolytic stability of immobilized proteins. Amino-terminated organic films were prepared on silicon wafers by self-assembling 3-aminopropyltriethoxysilane (APTES) in anhydrous toluene. Surface amino groups were derivatized into three different linkers: N-hydroxysuccinimide (NHS) ester, hydrazide, and maleimide ester groups. UV-visible absorption measurements and fluorescence microscopy revealed that more than 40% of surface amino groups were chemically modified. Protein immobilization was carried out on modified APTES films containing these linkers via coupling with primary amines (-NH(2)) in intact monoclonal rabbit immunoglobulin G (IgG), the aldehyde (-CHO) of an oxidized carbohydrate residue in IgG, or the sulfhydryl (-SH) of fragmented half-IgG, respectively. FTIR spectra contain vibrational signatures of these functional groups present in modified APTES films and immobilized IgGs. Changes in the APTES film thickness after chemical modifications and protein immobilization were also observed by ellipsometric measurements. The biological activity and long-term hydrolytic stability of immobilized IgGs on modified APTES films were estimated by fluorescence measurements of an adsorbed antigen, fluorescein isothiocyanate (FITC)-labeled goat anti-rabbit IgG (FITC-Ab). Our results indicate that the FITC-Ab binding capacity of half-IgG immobilized via maleimide groups is greater than that of the oxidized IgG and the intact IgG immobilized via hydrazide and NHS ester groups, respectively. In addition, IgGs immobilized using all coupling chemistries were hydrolytically stable in phosphate-buffered saline (PBS).

A rational approach in the design of selective mesoporous adsorbents

Two MCM-41 derived adsorbents have been tailor-made for the separation of silver and copper ions using the hard-soft, acid-base (HSAB) principle as the design guideline. NH2-MCM-41 containing "hard" Lewis base adsorption sites (i.e., RNH2) was prepared for the adsorption of the "hard" Lewis acid, Cu2+, and SH-MCM-41 with a grafted "soft" thiolpropyl base was prepared for the selective removal of Ag+, a "soft" Lewis acid. Single- and binary-component adsorption studies were conducted at different metal concentrations, solution compositions, and pH values. The experimental results showed that SH-MCM-41 has excellent affinity and capacity for silver adsorption and adsorbed only the silver ions with copper remaining in the solution. The selectivity was not affected by the metal concentration and composition, anion, and pH. Under similar experimental conditions, NH2-MCM-41 selectively adsorbed copper from the binary solution. The selectivity of NH2-MCM-41 remained for the copper at different pH values, although the adsorption capacity diminished at lower pH values. The type of anions used affected copper adsorption on NH2-MCM-41 with an increased copper uptake in the presence of the sulfate ions. A simple Freundlich adsorption model was sufficient to describe metal adsorption on SH-MCM-41 and NH2-MCM-41, and the LeVan and Vermeulen model was successfully used to predict the adsorption capacity and selectivity for binary-component adsorptions.

Surface/interface electronic structure in C(60) anchored aminothiolate self-assembled monolayer: an approach to molecular electronics

Electronic structure in self-assembled monolayers (SAMs) of C(60) anchored 11-amino-1-undecane thiol (C(60)-11-AUT) on Au(111) was studied by means of ultraviolet photoelectron spectroscopy and hybrid density functional theory calculations. Valence band features of the molecular conformation revealed the interface electronic structure to be dominated by sigma(S-Au), localized at the thiolate anchor to Au. Formation of a localized covalent bond as a result of hybridization between N P(z) orbital of -NH(2) group of the thiolate SAM and the pi level of C(60) resulted in a symmetry change from I(h) in C(60) to C1 in C(60)-11-AUT SAM. Appearance of low, but finite amplitude surface electronic states of bonded C(60), much beyond the Fermi level, ruled out Au-C(60) end group contact. The band gap E(g) of the SAM, determined to be 2.7 eV, was drastically reduced from the insulating alkanethiol SAMs ( approximately 8.0 eV) and fell intermediate between the C(60) ground state (N electrons, 1.6 eV) and C(60) solid (N+/-1 electrons, 3.7 eV).

Clay−Fulleropyrrolidine Nanocomposites

In this work, we describe the insertion of a water-soluble bisadduct fulleropyrrolidine derivative into the interlayer space of three layered smectite clays. The composites were characterized by a combination of powder X-ray diffraction, transmission electron microscopy, X-ray photoemission and FTIR spectroscopies, and laser flash photolysis measurements. The experiments, complemented by computer simulations, give insight into the formation process, structural details, and properties of the fullerene/clay nanocomposites. The reported composite materials constitute a new hybrid system, where C(60) differs from its crystals or its solutions, and open new perspectives for the design and construction of novel C(60)-based organic/clay hybrid materials.

Polarized near-edge x-ray-absorption fine structure spectroscopy of C60-functionalized 11-amino-1-undecane thiol self-assembled monolayer: Molecular orientation and Evidence for C60 aggregation

Near-edge x-ray-absorption fine structure (NEXAFS) spectroscopy was adopted to probe the unoccupied electronic states of C60 anchored onto an organized assembly of 11-amino-1-undecane thiol on Au(111). The polarization dependence of the intensity of pi* resonance associated with C60 pi network revealed the self-assembled monolayer (SAM) system to be oriented with an average molecular tilt angle of 57 degrees with respect to the surface normal. Invoking the absence of solid-state band dispersion effects and in comparison to solid C60 and /or 1-ML C60/Au(111), the electronic structure of the resulting assembly was found dominated by spectral position shift and linewidth and intensity changes of the lowest unoccupied molecular orbital (LUMO), LUMO+1, and LUMO+2 orbitals. The latter implied hybridization between N Pz of -NH2 group of thiolate SAM and pi levels of C60, resulting in a nucleophilic addition with a change in the symmetry of C60 from Ih to C1 in the SAM. Occurrence of a new feature at 285.3 eV in the NEXAFS spectrum, assigned previously to pi* graphitic LUMO, signified the formation of aggregated clusters, (C60)n of C60 monomer. Low tunneling current scanning tunneling microscopy confirmed them to be spherical and stable aggregates with n approximately 5.

Binding of fullerene C60 to gold surface functionalized by self-assembled monolayers of 8-amino-1-octane thiol: a structure elucidation

The formation of self-assembled chemisorbed monolayers (SAM) of 8-amino-1-undecane thiol functionalized with fullerene C(60) on gold, has been studied by contact angle measurements, Fourier transform infrared-attenuated total reflection (FTIR-ATR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). A two-step procedure was followed consisting of the chemisorption of amine-terminated organosulfur compounds, followed by their reaction with fullerenes at the solid-liquid interface. Covalent binding of fullerenes to these attachment layers was accessed by FTIR-ATR and XPS. ATR showed several major features in the C(60) skeleton ring vibration region along with all the characteristic features of the aminothiol. With increase in carbon to sulfur ratio, appearance of a C1s shake-up satellite peak due to the characteristic pi-pi(*) transition of the C(60) backbone and a low binding energy N1s feature confirmed the z.sbnd;NH(2) binding at the 6,6 double bond of the C(60) cage. Possible explanations for these experimental findings are discussed.