Mesoporous carbon particles by biomass waste based on sulfonation and copper oxide functionalization as efficient and stable electrode material for supercapacitor

Here, the hierarchical mesoporous-activated carbon particles obtained by KOH activation from pistachio shell wastes are modified by both the sulfonation process and CuO doping by hydrothermal heating (CuO@S-doped PSAC) for use as a supercapacitor. It is predicted that the electrochemical performance of the porous carbon electrode material obtained by such CuO doping and sulfonation process will be significantly increased with increased Faradaic capacitance. The electrochemical performance of CuO@S doped PSAC composite is systematically investigated by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and galvanostatic charge/discharge (GCD) in the presence of 1 M H2SO4, 1 M Na2SO4, and 1 M NaOH as electrolytes. The CuO@S doped PSAC-based electrode shows excellent stability with high specific capacitance up to 397.16 F/g at 0.1 A/g and 92.64% retention. Furthermore, FTIR, SEM, XRD, EDS, and nitrogen adsorption/desorption analyses are used for the characterisation of the obtained composites. Based on a significant supercapacitor performance, the synthesis strategy of carbon-based electrode material containing sulfonation and CuO modifications derived from agricultural biomass waste material is predicted to be a valuable example.

Facile synthesis of a three-dimensional Ln-MOF@FCNT composite for the fabrication of a symmetric supercapacitor device with ultra-high energy density: overcoming the energy storage barrier

In order to quench the thirst for efficient energy storage devices, a novel praseodymium-based state-of-the-art three-dimensional metal-organic framework (MOF), {[Pr(pdc)2]Me2NH2}n (YK-1), has been synthesized by using a simple solvothermal method employing a readily available ligand. YK-1 was characterised by single-crystal XRD and crystallographic analysis. The electrochemical measurements of YK-1 show that it exhibits a specific capacitance of 363.5 F g-1 at a current density of 1.5 A g-1 with 83.8% retention after 5000 cycles. In order to enhance its electrochemical performance for practical application, two composites of YK-1 with graphene oxide (GO) and functionalised multi-walled carbon nanotubes (FCNTs), namely YK-1@GO and YK-1@FCNT, were fabricated by employing a facile ultrasonication technique. The as-synthesized MOF and the composites were characterized by PXRD, FTIR, SEM, and TEM techniques. YK-1@GO and YK-1@FCNT offer enhanced specific capacitances of 488.2 F g-1 and 730.2 F g-1 at the same current density with 93.8% and 97.7% capacity retention after 5000 cycles, respectively (at 16 A g-1). Fascinated by the outstanding results shown by YK-1@FCNT, a symmetric supercapacitor device (SSC) based on it was fabricated. The assembled SSC achieved a remarkable energy density (87.6 W h kg-1) and power density (750.2 W kg-1) at a current density of 1 A g-1, along with very good cycling stability of 91.4% even after 5000 GCD cycles. The SSC device was able to power up several LED lights and even operated a DC brushless fan for a significant amount of time. To the best of our knowledge, the assembled SSC device exhibits the highest energy density among the MOF composite-based SSCs reported so far.

Electrophoretic Fabrication of ZnO/CuO and ZnO/CuO/rGO Heterostructures-based Thin Films as Environmental Benign Flexible Electrode for Supercapacitor

Sustainable fabrication of flexible hybrid supercapacitor electrodes is extensively investigated during the current era to solve global energy problems. Herein, we used a cost-effective and efficient electrophoretic deposition (EPD) approach to fabricate a hybrid supercapacitor electrode. ZnO/CuO and ZnO/CuO/rGO heterostructure were prepared by sol-gel synthesis route and were electrophoretically deposited on indium tin oxide (ITO) substrate as a thin uniform layer using 1 V for 20 min at 50 mV/s. ZnO/CuO and ZnO/CuO/rGO heterostructure coated ITOs were then employed as the working electrode in a three-electrode setup for supercapacitor measurements. The fabricated electrodes have been investigated by Galvanostatic charge-discharge (GCD), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) to study their charge storage properties. ZnO/CuO revealed a specific capacitance of 1945 F g^-1 at 2 mV/s and 999 F g^-1 at 5 A g^-1. However, an increased specific capacitance of 2305 F g^-1 was measured for ZnO/CuO/rGO heterostructure at 2 mV/s and 1235 F g^-1 at 5 A g^-1. The lower internal resistance was observed for ZnO/CuO/rGO heterostructure, indicating good conductivity of the electrode material. Thus, the overall results of the current study suggest that EPD-assisted ZnO/CuO/rGO heterostructure hybrid electrode possess a substantial potential for energy storage as a supercapacitor.

Construction of a Cu-Based Metal-Organic Framework by Employing a Mixed-Ligand Strategy and Its Facile Conversion into Nanofibrous CuO for Electrochemical Energy Storage Applications

Recently, metal-organic frameworks (MOFs) have been widely employed as a sacrificial template for the construction of nanostructured materials for a range of applications including energy storage. Herein, we report a facile mixed-ligand strategy for the synthesis of a Cu-MOF, [Cu₃(Azopy)₃(BTTC)₃(H₂O)₃·2H₂O]_n (where BTTC = 1,2,4,5-benzenetetracarboxylic acid and Azopy = 4,4'-azopyridine), via a slow-diffusion method at room temperature. X-ray analysis authenticates the two-dimensional (2D)-layered framework of Cu-MOF. Topologically, this 2D-layered structure is assigned as a 4-connected unimodal net with sql topology. Further, nanostructured CuO is obtained via a simple precipitation method by employing Cu-MOF as a precursor. After analysis of their physicochemical properties through various techniques, both materials are used as surface modifiers of glassy carbon electrodes for a comparative electrochemical study. The results reveal a superior charge storage performance of CuO (244.2 F g^-1 at a current density of 0.8 A g^-1) with a high rate capability compared to Cu-MOF. This observation paves the pathway for the strategic design of high-performing supercapacitor electrode materials.

Dual Functionalized CuMOF-Based Composite for High-Performance Supercapacitors

Herein, we utilized our previously reported highly porous CuMOF, {[Cu₂(L)(H₂O)₂]·(5DMF)·(4H₂O)}_n, decorated with amine and trifluoromethyl functional groups for energy storage application. This robust framework in CuMOF enhances the chemical and thermal stabilities as well as improves the interfacial binding interactions. The poor conductivity of CuMOF usually restricts its practical utility in energy storage systems, due to which rGO was introduced along with CuMOF to form a CuMOF/rGO composite (1) through a facile ultrasonication technique. The synergistic effects between CuMOF and rGO induce a dramatic enhancement in specific capacitance (462 F g^-1 at 0.8 A g^-1) of 1 with a cycle life of 93.75% up to 1000 cycles. The results highlight 1 as an emerging contestant for next generation supercapacitors.

Rosette-like MoS2 nanoflowers as highly active and stable electrodes for hydrogen evolution reactions and supercapacitors

MoS₂ is regarded as one of the cost-effective materials for many important applications. In this work, we report a simple one-step hydrothermal method for the directed synthesis of a rosette-like MoS₂ nanoflower modified electrode without using adhesion agents. Interestingly, owing to the hierarchical structures, the as-prepared MoS₂-based electrode exhibits significantly enhanced performance for both the hydrogen evolution reaction in acidic environments and supercapacitors. When used in the hydrogen evolution reaction, the electrode shows a low overpotential of ∼0.25 V at 10 mA cm⁻², a Tafel slope of ∼71.2 mV per decade, and long-term durability over 20 h of hydrogen evolution reaction operation at 10 mV cm⁻². In addition, as a supercapacitor electrode, it exhibits a good capacity of 137 mF cm⁻² at a current density of 10 mA cm⁻² and excellent stability in 1 M H₂SO₄ at a scan rate of 50 mV s⁻¹. The outstanding performances of the as-prepared materials may be ascribed to the unique 3D architectures of the rosette-like MoS₂ nanoflowers. This work could provide a strategy to explore low-cost and highly efficient electrocatalysts with desired nanostructures for the hydrogen evolution reaction and supercapacitors applications.

A simple strategy to synthesize interlayer spacing-enlarged rosette-like MoS₂ nanoflowers for both the hydrogen evolution reaction and supercapacitive energy storage.

Emerging Robust Heterostructure of MoS2-rGO for High-Performance Supercapacitors

The intermittent nature of renewable energy resources has led to a continuous mismatch between energy demand and supply. A possible solution to overcome this persistent problem is to design appropriate energy-storage materials. Supercapacitors based on different nanoelectrode materials have emerged as one of the promising storage devices. In this work, we investigate the supercapacitor properties of a molybdenum disulfide-reduced graphene oxide (rGO) heterostructure-based binder-free electrode, which delivered a high specific capacitance (387.6 F g^-1 at 1.2 A g^-1) and impressive cycling stability (virtually no loss up to 1000 cycles). In addition, the possible role of rGO in the composite toward synergistically enhanced supercapacitance has been highlighted. Moreover, an attempt has been made to correlate the electrochemical impedance spectroscopy studies with the voltammetric analyses. The performance exceeds that of the reported state-of-the-art structures.

Fabrication of RGO-NiCo2O4 nanorods composite from deep eutectic solvents for nonenzymatic amperometric sensing of glucose

A novel reduced graphene oxide supported nickel cobaltate nanorods composite (RGO-NiCo₂O₄) was prepared by a simple ionothermal method in deep eutectic solvents for the first time. Electrochemical results demonstrated that the obtained nanocomposite modified glassy carbon electrode exhibited excellent electrocatalytic performance towards the oxidation of glucose with a wide double-linear range from 1 μM to 25 mM and a low detection limit of 0.35 μM (S/N = 3). NiCo₂O₄ nanorods with many small interconnected nanoparticles provided many electrocatalytic active sites, while RGO with large surface area offered good electrical conductivity. The synergistic effect between NiCo₂O₄ nanorods and RGO contributed to the enhanced sensing ability of the hybrid nanostructure. This sensitive glucose sensor can be also used for the practical detection of glucose in human serum.

A novel adenine-based metal organic framework derived nitrogen-doped nanoporous carbon for flexible solid-state supercapacitor

In this article, we have synthesized a series of nitrogen-doped nanoporous carbon (NPC) from metal organic framework of UiO-66 with different ratios of adenine and 1,4-benzendicarboxylate (H2BDC) coated on carbon nanotube film (CNTF) to obtain a flexible porous electrode (NPC/CNTF). It is worth noting that the introduction of adenine at different ratios did not change the structure of UiO-66. We also investigated the effect of carbonization temperature from 800 to 1000°C on the electrochemical properties of the NPC. The ratio (H2BDC:adenine) 9 : 1 and the NPC carbonized at 900°C (denoted as NPC-1-900) exhibits better electrochemical properties. The results show that NPC-1-900/CNTF electrode exhibits an exceptional areal capacitance of 121.5 mF cm-2 compared to that of PC-900/CNTF electrode (22.8 mF cm-2) at 5 mV s-1 in a three-electrode system, indicating that the incorporation of nitrogen is beneficial to the electrochemical properties of nanoporous carbon. A symmetric flexible solid-state supercapacitor of NPC-1-900/CNTF has also been assembled and tested. Electrochemical data show that the device exhibited superior areal capacitance (43.2 mF cm-2) at the scan rate of 5 mV s-1; the volumetric energy density is 57.3 µWh cm-3 and the volumetric power density is 2.4 mW cm-3 at the current density of 0.5 mA cm-2 based on poly(vinyl alcohol)/H3PO4 gel electrolyte. For practical application, we have also studied the bending tests of the device, which show that the device exhibits outstanding mechanical stability under different bending angles. Furthermore, the flexible device shows excellent cyclic stability, which can retain 91.5% of the initial capacitance after 2000 cycles.

Multifunctional porous NiCo2O4 nanorods: sensitive enzymeless glucose detection and supercapacitor properties with impedance spectroscopic investigations

Multifunctional NiCo₂O₄ nanorods fabricated by a simple two-step method exhibit excellent performance in glucose sensors as well as supercapacitors.

Microwave assisted fabrication of a nanostructured reduced graphene oxide (rGO)/Fe2O3 composite as a promising next generation energy storage material

A supercapacitor electrode material, rGO–Fe₂O₃ composite, prepared by a facile microwave assisted in situ technique, delivers a high specific capacitance of 577.5 F g⁻¹ at a current density of 2 A g⁻¹ with a long cycle life and high rate performance.