Mechanistic Study on Electrocatalytic Hydrogen Evolution by High Efficiency Graphene/MoS2 Heterostructure

Ball-milled MoS2 with graphene shows enhanced catalytic activity for hydrogen evolution reaction

The hydrogen evolution reaction (HER) is an important phenomenon in water splitting. Consequently, the development of an active, earth-abundant, and inexpensive HER catalyst is highly desired. MoS2 has drawn considerable interest as an HER catalyst because it is composed of non-precious metal and exhibits high catalytic activity in the nanosheet form. In this study, size-controlled MoS2 particles were synthesized by ball milling. The as-prepared samples exhibited significantly enhanced electrochemical and catalytic properties compared to those of pristine bulk MoS2. Furthermore, the HER activity improved further upon the introduction of graphene into the as-prepared ball-milled samples. In particular, the MoS2 sample ball-milled for 12 h mixed with graphene exhibited optimal performance, showing an overpotential (160 mV at 10 mA cm-2) that was ~ 335 mV lower than that of pristine bulk MoS2. The superior catalytic activity was ascribed to the exposed edge sites, sulfur vacancies, and 1T phase of MoS2, as well as the noteworthy fortifying effect of the electronically conductive flexible material, graphene. The results provide a promising strategy for its application as an efficient and stable HER catalyst.

Electrochemically active site-rich nanocomposites of two-dimensional materials as anode catalysts for direct oxidation fuel cells: new age beyond graphene

Direct oxidation fuel cell (DOFC) has been opted as a green alternative to fossil fuels and intermittent energy resources as it is economically viable, possesses good conversion efficiency, as well as exhibits high power density and superfast charging. The anode catalyst is a vital component of DOFC, which improves the oxidation of fuels; however, the development of an efficient anode catalyst is still a challenge. In this regard, 2D materials have attracted attention as DOFC anode catalysts due to their fascinating electrochemical properties such as excellent mechanical properties, large surface area, superior electron transfer, presence of active sites, and tunable electronic states. This timely review encapsulates in detail different types of fuel cells, their mechanisms, and contemporary challenges; focuses on the anode catalyst/support based on new generation 2D materials, namely, 2D transition metal carbide/nitride or carbonitride (MXene), graphitic carbon nitride, transition metal dichalcogenides, and transition metal oxides; as well as their properties and role in DOFC along with the mechanisms involved.

Towards future physics and applications via two-dimensional material NEMS resonators

Two-dimensional materials (2Dm) offer a unique insight into the world of quantum mechanics including van der Waals (vdWs) interactions, exciton dynamics and various other nanoscale phenomena. 2Dm are a growing family consisting of graphene, hexagonal-Boron Nitride (h-BN), transition metal dichalcogenides (TMDs), monochalcogenides (MNs), black phosphorus (BP), MXenes and 2D organic crystals such as small molecules (e.g., pentacene, C8 BTBT, perylene derivatives, etc.) and polymers (e.g., COF and MOF, etc.). They exhibit unique mechanical, electrical, optical and optoelectronic properties that are highly enhanced as the surface to volume ratio increases, resulting from the transition of bulk to the few- to mono- layer limit. Such unique attributes include the manifestation of highly tuneable bandgap semiconductors, reduced dielectric screening, highly enhanced many body interactions, the ability to withstand high strains, ferromagnetism, piezoelectric and flexoelectric effects. Using 2Dm for mechanical resonators has become a promising field in nanoelectromechanical systems (NEMS) for applications involving sensors and condensed matter physics investigations. 2Dm NEMS resonators react with their environment, exhibit highly nonlinear behaviour from tension induced stiffening effects and couple different physics domains. The small size and high stiffness of these devices possess the potential of highly enhanced force sensitivities for measuring a wide variety of un-investigated physical forces. This review highlights current research in 2Dm NEMS resonators from fundamental physics and an applications standpoint, as well as presenting future possibilities using these devices.

Spin-transfer-torque mediated quantum magnetotransport in MoS2/phosphorene vdW heterostructure based MTJs

Spin-transfer-torque mediated quantum magnetotransport behaviour can be realized via magnetization density switching in 2D van der Waals heterostructures for device applications.

In-Plane Isotropic/Anisotropic 2D van der Waals Heterostructures for Future Devices

Mono- to few-layers of 2D semiconducting materials have uniquely inherent optical, electronic, and magnetic properties that make them ideal for probing fundamental scientific phenomena up to the 2D quantum limit and exploring their emerging technological applications. This Review focuses on the fundamental optoelectronic studies and potential applications of in-plane isotropic/anisotropic 2D semiconducting heterostructures. Strong light-matter interaction, reduced dimensionality, and dielectric screening in mono- to few-layers of 2D semiconducting materials result in strong many-body interactions, leading to the formation of robust quasiparticles such as excitons, trions, and biexcitons. An in-plane isotropic nature leads to the quasi-2D particles, whereas, an anisotropic nature leads to quasi-1D particles. Hence, in-plane isotropic/anisotropic 2D heterostructures lead to the formation of quasi-1D/2D particle systems allowing for the manipulation of high binding energy quasi-1D particle populations for use in a wide variety of applications. This Review emphasizes an exciting 1D-2D particles dynamic in such heterostructures and their potential for high-performance photoemitters and exciton-polariton lasers. Moreover, their scopes are also broadened in thermoelectricity, piezoelectricity, photostriction, energy storage, hydrogen evolution reactions, and chemical sensor fields. The unique in-plane isotropic/anisotropic 2D heterostructures may open the possibility of engineering smart devices in the nanodomain with complex opto-electromechanical functions.

Stable and Efficient Nitrogen-Containing Carbon-Based Electrocatalysts for Reactions in Energy-Conversion Systems

High activity and stability are crucial for the practical use of electrocatalysts in fuel cells, metal-air batteries, and water electrolysis, including the oxygen reduction reaction, hydrogen evolution reaction, oxygen evolution reaction, and oxidation reactions of formic acid and alcohols. Electrocatalysts based on nitrogen-containing carbon (N-C) materials show promise in catalyzing these reactions; however, there is no systematic review of strategies for the engineering of active and stable N-C-based electrocatalysts. Herein, a comprehensive comparison of recently reported N-C-based electrocatalysts regarding both electrocatalytic activity and long-term stability is presented. In the first part of this review, the relationships between the electrocatalytic reactions and selection of the element to modify the N-C-based materials are discussed. Afterwards, synthesis methods for N-C-based electrocatalysts are summarized, and strategies for the synthesis of highly stable N-C-based electrocatalysts are presented. Multiple tables containing data on crucial parameters for both electrocatalytic activity and stability are displayed in this review. Finally, constructing M-N_x moieties is proposed as the most promising engineering strategy for stable N-C-based electrocatalysts.

PAW-mediated ab initio simulations on linear response phonon dynamics of anisotropic black phosphorous monolayer for thermoelectric applications

The first-order standard perturbation theory combined with ab initio projector augmented wave operator challenges the realization of the standard Sternheimer equation with linear computational efficiency.

Controlling the bandgap in graphene/h-BN heterostructures to realize electron mobility for high performing FETs

Electric field induced field-effect mobility and nontrivial Z₂ topological phase transition in graphene sandwiched by h-BN bilayers.