Biotemplated metal nanowires using hyperthermophilic protein filaments

Bio template route for fabrication of a hybrid material composed of hierarchical boehmite, layered double hydroxides (Mg-Al) and porous carbon on a steel fiber for solid phase microextraction of agrochemicals

Nanosheets of a porous layered double hydroxide were directionally arranged on boehmite nanowires and porous carbon and used as a coating for solid-phase microextraction (SPME) method. Porous carbon tubes were prepared from goat grass and then coated with layered double hydroxide nanosheets and boehmite nanowires. The nanomaterial was placed on a stainless-steel wire which then was used for the extraction of fifteen agrochemicals from aqueous sample solutions. The extraction temperature, extraction time, ionic strength, stirring rate, and desorption temperature and time were optimized. Following thermal desorption of the agrochemicals in the injector of the gas chromatograph, they were quantified by GC/MS. Under optimum conditions, the repeatability for one fiber, expressed as relative standard deviation, was between 2.9 and 11.1%. The detection limits for the agrochemicals are between 2-29 ng L^-1. The method is simple, fast, and inexpensive (in terms of equipment). The fiber is thermally stable, and the relative recoveries from spiked samples are better compared to conventional methods of extraction. Graphical abstract Schematic illustration of the preparation of three-dimensional hierarchical boehmite/ layered double hydroxides/ porous carbon (Boeh/LDH/pC) SPME fibers and application for the extraction of fifteen agrochemicals from aqueous sample solutions following quantification by GC/MS.

Prefoldins in Archaea

Molecular chaperones promote the correct folding of proteins in aggregation-prone cellular environments by stabilizing nascent polypeptide chains and providing appropriate folding conditions. Prefoldins (PFDs) are molecular chaperones found in archaea and eukaryotes, generally characterized by a unique jellyfish-like hexameric structure consisting of a rigid beta-barrel backbone with protruding flexible coiled-coils. Unlike eukaryotic PFDs that mainly interact with cytoskeletal components, archaeal PFDs can stabilize a wide range of substrates; such versatility reflects PFD's role as a key element in archaeal chaperone systems, which often lack general nascent-chain binding chaperone components such as Hsp70. While archaeal PFDs mainly exist as hexameric complexes, their structural diversity ranges from tetramers to filamentous oligomers. PFDs bind and stabilize nonnative proteins using varying numbers of coiled-coils, and subsequently transfer the substrate to a group II chaperonin (CPN) for refolding. The distinct structure and specific function of archaeal PFDs have been exploited for a broad range of applications in biotechnology; furthermore, a filament-forming variant of PFD has been used to fabricate nanoscale architectures of defined shapes, demonstrating archaeal PFDs' potential applicability in nanotechnology.

Assembly of Multicomponent Protein Filaments Using Engineered Subunit Interfaces

Exploiting the ability of proteins to self-assemble into architectural templates may provide novel routes for the positioning of functional molecules in nanotechnology. Here we report the engineering of multicomponent protein templates composed of distinct monomers that assemble in repeating orders into a dynamic functional structure. This was achieved by redesigning the protein-protein interfaces of a molecular chaperone with helical sequences to create unique subunits that assemble through orthogonal coiled-coils into filaments up to several hundred nanometers in length. Subsequently, it was demonstrated that functional proteins could be fused to the subunits to achieve ordered alignment along filaments. Importantly, the multicomponent filaments had molecular chaperone activity and could prevent other proteins from thermal-induced aggregation, a potentially useful property for the scaffolding of enzymes. The design in this work is presented as proof-of-concept for the creation of modular templates that could potentially be used to position functional molecules, stabilize other proteins such as enzymes, and enable controlled assembly of nanostructures with unique topologies.

Protein-Mediated Biotemplating on the Nanoscale

Purified proteins offer a homogeneous population of biological nanoparticles, equipped in many cases with specific binding sites enabling the directed self-assembly of envisaged one-, two- or three-dimensional arrays. These arrays may serve as nanoscale biotemplates for the preparation of novel functional composite materials, which exhibit potential applications, especially in the fields of nanoelectronics and optical devices. This review provides an overview of the field of protein-mediated biotemplating, focussing on achievements made throughout the past decade. It is comprised of seven sections designed according to the size and configuration of the protein-made biotemplate. Each section describes the design and size of the biotemplate, the resulting hybrid structures, the fabrication methodology, the analytical tools employed for the structural analysis of the hybrids obtained, and, finally, their claimed/intended applications and a feasibility demonstration (whenever available). In conclusion, a short assessment of the overall status of the achievements already made vs. the future challenges of this field is provided.

Molecular chaperones: functional mechanisms and nanotechnological applications

Molecular chaperones are a group of proteins that assist in protein homeostasis. They not only prevent protein misfolding and aggregation, but also target misfolded proteins for degradation. Despite differences in structure, all types of chaperones share a common general feature, a surface that recognizes and interacts with the misfolded protein. This and other, more specialized properties can be adapted for various nanotechnological purposes, by modification of the original biomolecules or by de novo design based on artificial structures.

Geometrical assembly of ultrastable protein templates for nanomaterials

The fabrication of nanoscale devices requires architectural templates on which to position functional molecules in complex arrangements. Protein scaffolds are particularly promising templates for nanomaterials due to inherent molecular recognition and self-assembly capabilities combined with genetically encoded functionalities. However, difficulties in engineering protein quaternary structure into stable and well-ordered shapes have hampered progress. Here we report the development of an ultrastable biomolecular construction kit for the assembly of filamentous proteins into geometrically defined templates of controllable size and symmetry. The strategy combines redesign of protein–protein interaction specificity with the creation of tunable connector proteins that govern the assembly and projection angles of the filaments. The functionality of these nanoarchitectures is illustrated by incorporation of nanoparticles at specific locations and orientations to create hybrid materials such as conductive nanowires. These new structural components facilitate the manufacturing of nanomaterials with diverse shapes and functional properties over a wide range of processing conditions.

Protein nanotechnology for the fabrication of protein-based nanoscale devices is gaining momentum but assembling well-defined three-dimensional shapes is still challenging. Here, the authors use an existing prefoldin assembled system to design a template for the construction of geometrically constrained structures.

Biomimetic and Bioinspired Synthesis of Nanomaterials/Nanostructures

In recent years, due to its unparalleled advantages, the biomimetic and bioinspired synthesis of nanomaterials/nanostructures has drawn increasing interest and attention. Generally, biomimetic synthesis can be conducted either by mimicking the functions of natural materials/structures or by mimicking the biological processes that organisms employ to produce substances or materials. Biomimetic synthesis is therefore divided here into "functional biomimetic synthesis" and "process biomimetic synthesis". Process biomimetic synthesis is the focus of this review. First, the above two terms are defined and their relationship is discussed. Next different levels of biological processes that can be used for process biomimetic synthesis are compiled. Then the current progress of process biomimetic synthesis is systematically summarized and reviewed from the following five perspectives: i) elementary biomimetic system via biomass templates, ii) high-level biomimetic system via soft/hard-combined films, iii) intelligent biomimetic systems via liquid membranes, iv) living-organism biomimetic systems, and v) macromolecular bioinspired systems. Moreover, for these five biomimetic systems, the synthesis procedures, basic principles, and relationships are discussed, and the challenges that are encountered and directions for further development are considered.

Engineered Protein Polymer-Gold Nanoparticle Hybrid Materials for Small Molecule Delivery

We have fabricated protein polymer-gold nanoparticle (P-GNP) nanocomposites that exhibit enhanced binding and delivery properties of the small hydrophobic molecule drug, curcumin, to the model breast cancer cell line, MCF-7. These hybrid biomaterials are constructed via in situ GNP templated-synthesis with genetically engineered histidine tags. The P-GNP nanocomposites exhibit enhanced small molecule loading, sustained release and increased uptake by MCF-7 cells. When compared to the proteins polymers alone, the P-GNPs demonstrate a greater than 7-fold increase in curcumin binding, a nearly 50% slower release profile and more than 2-fold increase in cellular uptake of curcumin. These results suggest that P-GNP nanocomposites serve as promising candidates for drug delivery vehicles.

Characterization of conductive nanobiomaterials derived from viral assemblies by low-voltage STEM imaging and Raman scattering

New technologies require the development of novel nanomaterials that need to be fully characterized to achieve their potential. High-resolution low-voltage scanning transmission electron microscopy (STEM) has proven to be a very powerful technique in nanotechnology, but its use for the characterization of nanobiomaterials has been limited. Rotavirus VP6 self-assembles into nanotubular assemblies that possess an intrinsic affinity for Au ions. This property was exploited to produce hybrid nanobiomaterials by the in situ functionalization of recombinant VP6 nanotubes with gold nanoparticles. In this work, Raman spectroscopy and advanced analytical electron microscopy imaging with spherical aberration-corrected (Cs) STEM and nanodiffraction at low-voltage doses were employed to characterize nanobiomaterials. STEM imaging revealed the precise structure and arrangement of the protein templates, as well as the nanostructure and atomic arrangement of gold nanoparticles with high spatial sub-Angstrom resolution and avoided radiation damage. The imaging was coupled with backscattered electron imaging, ultra-high resolution scanning electron microscopy and x-ray spectroscopy. The hybrid nanobiomaterials that were obtained showed unique properties as bioelectronic conductive devices and showed enhanced Raman scattering by their precise arrangement into superlattices, displaying the utility of viral assemblies as functional integrative self-assembled nanomaterials for novel applications.

Electronic properties of a graphene device with peptide adsorption: insight from simulation

In this work, to explain doping behavior of single-layer graphene upon HSSYWYAFNNKT (P1) and HSSAAAAFNNKT (P1-3A) adsorption in field-effect transistors (GFETs), we applied a combined computational approach, whereby peptide adsorption was modeled by molecular dynamics simulations, and the lowest energy configuration was confirmed by density functional theory calculations. On the basis of the resulting structures of the hybrid materials, electronic structure and transport calculations were investigated. We demonstrate that π-π stacking of the aromatic residues and proximate peptide backbone to the graphene surface in P1 have a role in the p-doping. These results are consistent with our experimental observation of the GFET's p-doping even after a 24-h annealing procedure. Upon substitution of three of the aromatic residues to Ala in (P1-3A), a considerable decrease from p-doping is observed experimentally, demonstrating n-doping as compared to the nonadsorbed device, yet not explained based on the atomistic MD simulation structures. To gain a qualitative understanding of P1-3A's adsorption over a longer simulation time, which may differ from aromatic amino acid residues' swift anchoring on the surface, we analyzed equilibrated coarse-grain simulations performed for 500 ns. Desorption of the Ala residues from the surface was shown computationally, which could in turn affect charge transfer, yet a full explanation of the mechanism of n-doping will require elucidation of differences between various aromatic residues as dependent on peptide composition, and inclusion of effects of the substrate and environment, to be considered in future work.

Recombinant bacteriophages as gold binding bio-templates

Bacteriophages are nano-sized virion particles infecting bacteria. In this study, it is shown that metal binding properties of filamentous fd-bacteriophages can be enhanced by genetic engineering. Quartz crystal microbalance (QCM) analyses, UV-vis absorption spectra measurements and scanning electron microscopy (SEM) imaging revealed that expression of MMM short amino acid sequence on major coat protein p8 facilitates recombinant MMM-phage binding to Au surfaces and nanoparticles (NPs) via gold-sulfur (AuS) interaction. Electroless deposition of Au particles on phage assemblies was investigated upon chemical reduction reaction with NaBH4 at different HAuCl4 precursor concentrations. Energy dispersive X-ray spectroscopy (EDX) measurements confirmed the presence of Au on both AuNP decorated and chemically metallized phage structures. Further studies on patterning and controlled immobilization of recombinant bacteriophages on specific surfaces may contribute to bio-templated nanowire development field and biosensor application studies.

Hybrid nanostructures for energy storage applications

Materials engineering plays a key role in the field of energy storage. In particular, engineering materials at the nanoscale offers unique properties resulting in high performance electrodes and electrolytes in various energy storage devices. Consequently, considerable efforts have been made in recent years to fulfill the future requirements of electrochemical energy storage using these advanced materials. Various multi-functional hybrid nanostructured materials are currently being studied to improve energy and power densities of next generation storage devices. This review describes some of the recent progress in the synthesis of different types of hybrid nanostructures using template assisted and non-template based methods. The potential applications and recent research efforts to utilize these hybrid nanostructures to enhance the electrochemical energy storage properties of Li-ion battery and supercapacitor are discussed. This review also briefly outlines some of the recent progress and new approaches being explored in the techniques of fabrication of 3D battery structures using hybrid nanoarchitectures.

Metallization and investigation of electrical properties of in vitro recrystallized mSbsC-eGFP assemblies

Surface layer (SL) proteins are self-assembling nanosized arrays which can be recrystallized in solution or on surfaces. In this paper, we investigate the metallization, contact potential difference and conductivity of in vitro recrystallized mSbsC-eGFP tube-like assemblies for possible applications in nanobiotechnology. Treatment of mSbsC-eGFP tube-like structures with 150 mM Pt salt solution resulted in the formation of metallized SL assemblies decorated with Pt nanoparticles (∅ > 3 nm) which were closely packed and aggregated into metal clusters. Kelvin probe force microscopy (KPFM) measurements revealed that metallized and unmetallized SL templates showed different surface potential behaviours, demonstrating that the metal coating changes the electrostatic surface characteristics of SL assemblies. In situ conductivity measurements showed that unmetallized SL assemblies were not conductive. Metallized samples showed linear I-V dependence between - 1 and + 1 V with a conductivity of ∼ 10(3) S m( - 1).

Photochemical and thermal stability of green and blue proteorhodopsins: implications for protein-based bioelectronic devices

The photochemical and thermal stability of the detergent-solubilized blue- and green-absorbing proteorhodpsins, BPR and GPR, respectively, are investigated to determine the viability of these proteins for photonic device applications. Photochemical stability is studied by using pulsed laser excitation and differential UV-vis spectroscopy to assign the photocyclicity. GPR, with a cyclicity of 7 × 10(4) photocycles protein(-1), is 4-5 times more stable than BPR (9 × 10(3) photocycles protein(-1)), but is less stable than native bacteriorhodopsin (9 × 10(5) photocycles protein(-1)) or the 4-keto-bacteriorhodopsin analogue (1 × 10(5) photocycles protein(-1)). The thermal stabilities are assigned by using differential scanning calorimetry and thermal bleaching experiments. Both proteorhodopsins display excellent thermal stability, with melting temperatures above 85 °C, and remain photochemically stable up to 75 °C. The biological relevance of our results is also discussed. The lower cyclicity of BPR is found to be adequate for the long-term biological function of the host organism at ocean depths of 50 m or more.

Biotemplate synthesis of monodispersed iron phosphate hollow microspheres

Monodispersed iron phosphate hollow microspheres with a high degree of crystallization were prepared through a facile in situ deposition method using rape pollen grains as a biotemplate. The functional group on the surface of the pollen grains could adsorb Fe(3+), which provided the nucleation sites for growth of iron phosphate nanoparticles. After being sintered at 600 degrees C for 10 h, the pollen grains were removed and iron phosphate hollow microspheres were obtained. A scanning electron microscope and x-ray diffraction were applied to characterize the morphology and crystalline structure of the pollen grains, iron phosphate-coated pollen grains and iron phosphate hollow microspheres. Differential scanning calorimetry and thermogravity analyses were performed to investigate the thermal behavior of the iron phosphate-coated pollen grains during the calcinations. Energy dispersive spectroscopy and Fourier transform infrared spectroscopy were utilized to investigate the interaction between the pollen grains and iron phosphate. The effect of the pollen wall on the surface morphology of these iron phosphate hollow microspheres was also proven in this work.