Combinatorial on-chip study of miniaturized 3D porous scaffolds using a patterned superhydrophobic platform

Pushing the Natural Frontier: Progress on the Integration of Biomaterial Cues toward Combinatorial Biofabrication and Tissue Engineering

The engineering of fully functional, biological-like tissues requires biomaterials to direct cellular events to a near-native, 3D niche extent. Natural biomaterials are generally seen as a safe option for cell support, but their biocompatibility and biodegradability can be just as limited as their bioactive/biomimetic performance. Furthermore, integrating different biomaterial cues and their final impact on cellular behavior is a complex equation where the outcome might be very different from the sum of individual parts. This review critically analyses recent progress on biomaterial-induced cellular responses, from simple adhesion to more complex stem cell differentiation, looking at the ever-growing possibilities of natural materials modification. Starting with a discussion on native material formulation and the inclusion of cell-instructive cues, the roles of shape and mechanical stimuli, the susceptibility to cellular remodeling, and the often-overlooked impact of cellular density and cell-cell interactions within constructs, are delved into. Along the way, synergistic and antagonistic combinations reported in vitro and in vivo are singled out, identifying needs and current lessons on the development of natural biomaterial libraries to solve the cell-material puzzle efficiently. This review brings together knowledge from different fields envisioning next-generation, combinatorial biomaterial development toward complex tissue engineering.

Superhydrophobic Modification of Biomass Cuttlebone Applied to Oil Spill Remediation

The spills of crude oil and other organic chemicals are common around the world, resulting in severe damage to the environment and ecosystem. Therefore, developing low-cost and eco-friendly absorption material is in urgent need. In this study, we report a superhydrophobic and oleophilic porous material using biomass cuttlebone as the scaffold. A layer of polydopamine is grafted on the cuttlebone as the adhesion layer between the cuttlebone and the superhydrophobic coating. The in situ grown silica micro/nanoparticles on top of the adhesion layer provide the anchoring spots for grafting the fluorinated hydrocarbon and a rough topography for realizing superhydrophobicity. The static water contact angle of the superhydrophobic cuttlebone reaches 152°, and its oil contact angle is ~0°. The excellent oil–water separation efficiency of the prepared superhydrophobic cuttlebone is demonstrated using high-density oil/water mixtures and low-density oil/water mixtures.

Micro/Nanopatterned Superhydrophobic Surfaces Fabrication for Biomolecules and Biomaterials Manipulation and Analysis

Superhydrophobic surfaces display an extraordinary repulsion to water and water-based solutions. This effect emerges from the interplay of intrinsic hydrophobicity of the surface and its morphology. These surfaces have been established for a long time and have been studied for decades. The increasing interest in recent years has been focused towards applications in many different fields and, in particular, biomedical applications. In this paper, we review the progress achieved in the last years in the fabrication of regularly patterned superhydrophobic surfaces in many different materials and their exploitation for the manipulation and characterization of biomaterial, with particular emphasis on the issues affecting the yields of the fabrication processes and the quality of the manufactured devices.

Microfluidic High-Throughput Platforms for Discovery of Novel Materials

High-throughput screening is a potent technique to accelerate the discovery and development of new materials. By performing massive synthesis and characterization processes in parallel, it can rapidly discover materials with desired components, structures and functions. Among the various approaches for high-throughput screening, microfluidic platforms have attracted increasing attention. Compared with many current strategies that are generally based on robotic dispensers and automatic microplates, microfluidic platforms can significantly increase the throughput and reduce the consumption of reagents by several orders of magnitude. In this review, we first introduce current advances of the two types of microfluidic high-throughput platforms based on microarrays and microdroplets, respectively. Then the utilization of these platforms for screening different types of materials, including inorganic metals, metal alloys and organic polymers are described in detail. Finally, the challenges and opportunities in this promising field are critically discussed.

Screening of perfused combinatorial 3D microenvironments for cell culture

Biomaterials combining biochemical and biophysical cues to establish close-to-extracellular matrix (ECM) models have been explored for cell expansion and differentiation purposes. Multivariate arrays are used as material-saving and rapid-to-analyze platforms, which enable selecting hit-spotted formulations targeting specific cellular responses. However, these systems often lack the ability to emulate dynamic mechanical aspects that occur in specific biological milieus and affect physiological phenomena including stem cells differentiation, tumor progression, or matrix modulation. We report a tailor-made strategy to address the combined effect of flow and biochemical composition of three-dimensional (3D) biomaterials on cellular response. We suggest a simple-to-implement device comprising (i) a perforated platform accommodating miniaturized 3D biomaterials and (ii) a bioreactor that enables the incorporation of the biomaterial-containing array into a disposable perfusion chamber. The system was upscaled to parallelizable setups, increasing the number of analyzed platforms per independent experiment. As a proof-of-concept, porous chitosan scaffolds with 1 mm diameter were functionalized with combinations of 5 ECM and cell-cell contact-mediating proteins, relevant for bone and dental regeneration, corresponding to 32 protein combinatorial formulations. Mesenchymal stem cells adhesion and production of an early osteogenic marker were assessed on-chip on static and under-flow dynamic perfusion conditions. Different hit-spotted biomaterial formulations were detected for the different flow regimes using direct image analysis. Cell-binding proteins still poorly explored as biomaterials components - amelogenin and E-cadherin - were here shown as relevant cell response modulators. Their combination with ECM cell-binding proteins - fibronectin, vitronectin, and type 1 collagen - rendered specific biomaterial combinations with high cell adhesion and ALP production under flow. The developed versatile system may be targeted at widespread tissue regeneration applications, and as a disease model/drug screening platform. STATEMENT OF SIGNIFICANCE: A perfusion system that enables cell culture in arrays of three-dimensional biomaterials under dynamic flow is reported. The effect of 31 cell-binding protein combinations in the adhesion and alkaline phosphatase (ALP) production of mesenchymal stem cells was assessed using a single bioreactor chamber. Flow perfusion was not only assessed as a classical enhancer/accelerator of cell growth and early osteogenic differentiation. We hypothesized that flow may affect cell-protein interactions, and that key components driving cell response may differ under static or dynamic regimes. Indeed, hit-spotted formulations that elicited highest cell attachment and ALP production on static cell culture differed from the ones detected for dynamic flow assays. The impacting role of poorly studied proteins as E-cadherin and amelogenin as biomaterial components was highlighted.

Design of spherically structured 3D in vitro tumor models -Advances and prospects

Three-dimensional multicellular tumor models are receiving an ever-growing focus as preclinical drug-screening platforms due to their potential to recapitulate major physiological features of human tumors in vitro. In line with this momentum, the technologies for assembly of 3D microtumors are rapidly evolving towards a comprehensive inclusion of tumor microenvironment elements. Customized spherically structured platforms, including microparticles and microcapsules, provide a robust and scalable technology to imprint unique biomolecular tumor microenvironment hallmarks into 3D in vitro models. Herein, a comprehensive overview of novel advances on the integration of tumor-ECM components and biomechanical cues into 3D in vitro models assembled in spherical shaped platforms is provided. Future improvements regarding spatiotemporal/mechanical adaptability, and degradability, during microtumors in vitro 3D culture are also critically discussed considering the realistic potential of these platforms to mimic the dynamic tumor microenvironment. From a global perspective, the production of 3D multicellular spheroids with tumor ECM components included in spherical models will unlock their potential to be used in high-throughput screening of therapeutic compounds. It is envisioned, in a near future, that a combination of spherically structured 3D microtumor models with other advanced microfluidic technologies will properly recapitulate the flow dynamics of human tumors in vitro.

STATEMENT OF SIGNIFICANCE

The ability to correctly mimic the complexity of the tumor microenvironment in vitro is a key aspect for the development of evermore realistic in vitro models for drug-screening and fundamental cancer biology studies. In this regard, conventional spheroid-based 3D tumor models, combined with spherically structured biomaterials, opens the opportunity to precisely recapitulate complex cell-extracellular matrix interactions and tumor compartmentalization. This review provides an in-depth focus on current developments regarding spherically structured scaffolds engineered into in vitro 3D tumor models, and discusses future advances toward all-encompassing platforms that may provide an improved in vitro/in vivo correlation in a foreseeable future.

Cell-Based Microarrays Using Superhydrophobic Platforms Patterned with Wettable Regions

The use of patterned platforms to print cellular arrays enables the high-throughput study of cell behavior under a multitude of different conditions. This rapid, cost-saving and systematic way of acquiring biologically relevant information has found application in diverse scientific and industrial fields. In an initial stage of development, platforms targeting high-throughput cellular studies were restricted to standard two-dimensional (2D) setups. The design of novel platforms compatible with three-dimensional (3D) cell culture arose after the elucidation of the extreme importance of culturing cells in matrices resembling the native extracellular matrix-cells and cell-cell interactions. This need for biomimetic environments has been established in fields like drug discovery and testing, disease model development, and regenerative medicine. Here, we provide a description of the processing of flat platforms based on wettability contrast, compatible with the high-throughput generation and study of cell response in 3D biomaterials, including cell-laden hydrogels and porous 3D scaffolds. The application of the aforementioned platforms to produce 3D microtissues, which may find application as tissue models for drug screening or as biomimetic building blocks for tissue engineering, is also addressed. In this chapter, a description of the steps for (1) high-throughput platform processing, (2) deposition of cell and biomaterial arrays, and (3) image-based results screening is provided.

High-throughput approaches for screening and analysis of cell behaviors

The rapid development of new biomaterials and techniques to modify them challenge our capability to characterize them using conventional methods. In response, numerous high-throughput (HT) strategies are being developed to analyze biomaterials and their interactions with cells using combinatorial approaches. Moreover, these systematic analyses have the power to uncover effects of delivered soluble bioactive molecules on cell responses. In this review, we describe the recent developments in HT approaches that help identify cellular microenvironments affecting cell behaviors and highlight HT screening of biochemical libraries for gene delivery, drug discovery, and toxicological studies. We also discuss HT techniques for the analyses of cell secreted biomolecules and provide perspectives on the future utility of HT approaches in biomedical engineering.

Spatially and Temporally Controlled Hydrogels for Tissue Engineering

Recent years have seen tremendous advances in the field of hydrogel-based biomaterials. One of the most prominent revolutions in this field has been the integration of elements or techniques that enable spatial and temporal control over hydrogels' properties and functions. Here, we critically review the emerging progress of spatiotemporal control over biomaterial properties towards the development of functional engineered tissue constructs. Specifically, we will highlight the main advances in the spatial control of biomaterials, such as surface modification, microfabrication, photo-patterning, and three-dimensional (3D) bioprinting, as well as advances in the temporal control of biomaterials, such as controlled release of molecules, photocleaving of proteins, and controlled hydrogel degradation. We believe that the development and integration of these techniques will drive the engineering of next-generation engineered tissues.

Superhydrophobic Surface With Shape Memory Micro/Nanostructure and Its Application in Rewritable Chip for Droplet Storage

Recently, superhydrophobic surfaces with tunable wettability have aroused much attention. Noticeably, almost all present smart performances rely on the variation of surface chemistry on static micro/nanostructure, to obtain a surface with dynamically tunable micro/nanostructure, especially that can memorize and keep different micro/nanostructures and related wettabilities, is still a challenge. Herein, by creating micro/nanostructured arrays on shape memory polymer, a superhydrophobic surface that has shape memory ability in changing and recovering its hierarchical structures and related wettabilities was reported. Meanwhile, the surface was successfully used in the rewritable functional chip for droplet storage by designing microstructure-dependent patterns, which breaks through current research that structure patterns cannot be reprogrammed. This article advances a superhydrophobic surface with shape memory hierarchical structure and the application in rewritable functional chip, which could start some fresh ideas for the development of smart superhydrophobic surface.

Recent Advances in TiO2 -Based Nanostructured Surfaces with Controllable Wettability and Adhesion

Bioinspired surfaces with special wettability and adhesion have attracted great interest in both fundamental research and industry applications. Various kinds of special wetting surfaces have been constructed by adjusting the topographical structure and chemical composition. Here, recent progress of the artificial superhydrophobic surfaces with high contrast in solid/liquid adhesion has been reviewed, with a focus on the bioinspired construction and applications of one-dimensional (1D) TiO2-based surfaces. In addition, the significant applications related to artificial super-wetting/antiwetting TiO2-based structure surfaces with controllable adhesion are summarized, e.g., self-cleaning, friction reduction, anti-fogging/icing, microfluidic manipulation, fog/water collection, oil/water separation, anti-bioadhesion, and micro-templates for patterning. Finally, the current challenges and future prospects of this renascent and rapidly developing field, especially with regard to 1D TiO2-based surfaces with special wettability and adhesion, are proposed and discussed.

3D Biomaterial Microarrays for Regenerative Medicine: Current State-of-the-Art, Emerging Directions and Future Trends

Three dimensional (3D) biomaterial microarrays hold enormous promise for regenerative medicine because of their ability to accelerate the design and fabrication of biomimetic materials. Such tissue-like biomaterials can provide an appropriate microenvironment for stimulating and controlling stem cell differentiation into tissue-specific lineages. The use of 3D biomaterial microarrays can, if optimized correctly, result in a more than 1000-fold reduction in biomaterials and cells consumption when engineering optimal materials combinations, which makes these miniaturized systems very attractive for tissue engineering and drug screening applications.

Towards the design of 3D multiscale instructive tissue engineering constructs: Current approaches and trends

The design of 3D constructs with adequate properties to instruct and guide cells both in vitro and in vivo is one of the major focuses of tissue engineering. Successful tissue regeneration depends on the favorable crosstalk between the supporting structure, the cells and the host tissue so that a balanced matrix production and degradation are achieved. Herein, the major occurring events and players in normal and regenerative tissue are overviewed. These have been inspiring the selection or synthesis of instructive cues to include into the 3D constructs. We further highlight the importance of a multiscale perception of the range of features that can be included on the biomimetic structures. Lastly, we focus on the current and developing tissue-engineering approaches for the preparation of such 3D constructs: top-down, bottom-up and integrative. Bottom-up and integrative approaches present a higher potential for the design of tissue engineering devices with multiscale features and higher biochemical control than top-down strategies, and are the main focus of this review.

A novel hanging spherical drop system for the generation of cellular spheroids and high throughput combinatorial drug screening

We propose a novel hanging spherical drop system for anchoring arrays of droplets of cell suspension based on the use of biomimetic superhydrophobic flat substrates, with controlled positional adhesion and minimum contact with a solid substrate. By facing down the platform, it was possible to generate independent spheroid bodies in a high throughput manner, in order to mimic in vivo tumour models on the lab-on-chip scale. To validate this system for drug screening purposes, the toxicity of the anti-cancer drug doxorubicin in cell spheroids was tested and compared to cells in 2D culture. The advantages presented by this platform, such as feasibility of the system and the ability to control the size uniformity of the spheroid, emphasize its potential to be used as a new low cost toolbox for high-throughput drug screening and in cell or tissue engineering.

Micro/nano-structured superhydrophobic surfaces in the biomedical field: part II: applications overview

The properties of surfaces define the acceptance and integration of biomaterials in vivo, as well as the material's efficiency when used at research or manufacturing levels. The presence of micro/nano-topographical structures and low surface energies could bring several advantages when highly repellent surfaces are employed in the biomedical field. Biomimetic superhydrophobic surfaces have been explored for diverse applications: as an intrinsic characteristic of biomaterials to be implanted; as materials that exhibit special interactions with biological entities; or to be used in ex vivo applications. This article aims to focus on the main motivations and requirements in the biomedical field that pushed for the utilization of superhydrophobic surfaces as suitable alternatives, as well as the great evolution of applications that have emerged in the last few years.

Multifunctional superamphiphobic TiO2 nanostructure surfaces with facile wettability and adhesion engineering

Compared to conventional top-down photo-cleavage method, a facile bottom-up ink-combination method to in situ and rapidly achieve water wettability and adhesion transition, with a great contrast on the superamphiphobic TiO2 nanostructured film, is described. Moreover, such combination method is suitable for various kinds of superamphiphobic substrate. Oil-based ink covering or removing changes not only the topographical morphology but also surface chemical composition, and these resultant topographical morphology and composition engineering realize the site-selectively switchable wettability varying from superamphiphobicity to amphiphilicity, and water adhesion between sliding superamphiphobicity and sticky superamphiphobicity in micro-scale. Additionally, positive and negative micro-pattern can be achieved by taking advantage of the inherent photocatalytic property of TiO2 with the assistance of anti-UV light ink mask. Finally, the potential applications of the site-selectively sticky superamphiphobic surface were demonstrated. In a proof-of-concept study, the microdroplet manipulation (storage, moving, mixing, and transfer), specific gas sensing, wettability template for positive and negative ZnO patterning, and site-selective cell immobilization have been demonstrated. This study will give an important input to the field of advanced functional material surfaces with special wettability.

In vivo high-content evaluation of three-dimensional scaffolds biocompatibility

While developing tissue engineering strategies, inflammatory response caused by biomaterials is an unavoidable aspect to be taken into consideration, as it may be an early limiting step of tissue regeneration approaches. We demonstrate the application of flat and flexible films exhibiting patterned high-contrast wettability regions as implantable platforms for the high-content in vivo study of inflammatory response caused by biomaterials. Screening biomaterials by using high-throughput platforms is a powerful method to detect hit spots with promising properties and to exclude uninteresting conditions for targeted applications. High-content analysis of biomaterials has been mostly restricted to in vitro tests where crucial information is lost, as in vivo environment is highly complex. Conventional biomaterials implantation requires the use of high numbers of animals, leading to ethical questions and costly experimentation. Inflammatory response of biomaterials has also been highly neglected in high-throughput studies. We designed an array of 36 combinations of biomaterials based on an initial library of four polysaccharides. Biomaterials were dispensed onto biomimetic superhydrophobic platforms with wettable regions and processed as freeze-dried three-dimensional scaffolds with a high control of the array configuration. These chips were afterward implanted subcutaneously in Wistar rats. Lymphocyte recruitment and activated macrophages were studied on-chip, by performing immunocytochemistry in the miniaturized biomaterials after 24 h and 7 days of implantation. Histological cuts of the surrounding tissue of the implants were also analyzed. Localized and independent inflammatory responses were detected. The integration of these data with control data proved that these chips are robust platforms for the rapid screening of early-stage in vivo biomaterials' response.

Photopatterned antibodies for selective cell attachment

We present a phototriggerable system that allows for the spatiotemporal controlled attachment of selected cell types to a biomaterial using immobilized antibodies that specifically target individual cell phenotypes. o-Nitrobenzyl caged biotin was used to functionalize chitosan membranes and mediate site-specific coupling of streptavidin and biotinylated antibodies after light activation. The ability of this system to capture and immobilize specific cells on a surface was tested using endothelial-specific biotinylated antibodies and nonspecific ones as controls. Homogeneous patterned monolayers of human umbilical vein endothelial cells were obtained on CD31-functionalized surfaces. This is a simple and generic approach that is applicable to other ligands, materials, and cell types and shows the flexibility of caged ligands to trigger and control the interaction between cells and biomaterials.

Superhydrophobic chips for cell spheroids high-throughput generation and drug screening

We suggest the use of biomimetic superhydrophobic patterned chips produced by a benchtop methodology as low-cost and waste-free platforms for the production of arrays of cell spheroids/microtissues by the hanging drop methodology. Cell spheroids have a wide range of applications in biotechnology fields. For drug screening, they allow studying 3D models in structures resembling real living tissues/tumors. In tissue engineering, they are suggested as building blocks of bottom-up fabricated tissues. We used the wettability contrast of the chips to fix cell suspension droplets in the wettable regions and evaluated on-chip drug screening in 3D environment. Cell suspensions were patterned in the wettable spots by three distinct methods: (1) by pipetting the cell suspension directly in each individual spot, (2) by the continuous dragging of a cell suspension on the chip, and (3) by dipping the whole chip in a cell suspension. These methods allowed working with distinct throughputs and degrees of precision. The platforms were robust, and we were able to have static or dynamic environments in each droplet. The access to cell culture media for exchange or addition/removal of components was versatile and opened the possibility of using each spot of the chip as a mini-bioreactor. The platforms' design allowed for samples visualization and high-content image-based analysis on-chip. The combinatorial analysis capability of this technology was validated by following the effect of doxorubicin at different concentrations on spheroids formed using L929 and SaOs-2 cells.

Superhydrophobic surfaces engineered using diatomaceous earth

We present a simple method to prepare superhydrophobic surfaces using siliceous exoskeleton of diatoms, a widespread group of algae. This makes diatomaceous earth an accessible and cheap natural material. A micro/nanoscale hierarchical topography was achieved by coating a glass surface with diatomaceous earth, giving rise to a superhydrophilic surface. Superhydrophobic surfaces were obtained by a further surface chemical modification through fluorosilanization. The wettability of the superhydrophobic surface can be modified by Argon plasma treatment in a controlled way by exposure time variation. The chemical surface modification by fluorosilanization and posterior fluorinated SH surface modification by plasma treatment was analyzed by XPS. Using appropriated hollowed masks only specific areas on the surface were exposed to plasma permitting to pattern hydrophilic features with different geometries on the superhydrophobic surface. We showed that the present strategy can be also applied in other substrates, including thermoplastics, enlarging the potential applicability of the resulting surfaces.