Bioinspired catechol-terminated self-assembled monolayers with enhanced adhesion properties

Enhanced antibacterial effect and biodegradation of coating via dual-in-situ growth based on carboxymethyl cellulose

The lack of antimicrobial effect of commercial paper coating for food packaging makes it difficult to prevent food spoilage and harms the environment by non-biodegradation. Herein, carboxymethyl cellulose (CMC) provides negatively charged sites for anchoring Ag⁺ and Zn²⁺ to grow AgNPs and ZIF-8 in situ on its molecular chains. The ZIF-8/AgNPs@CMC paper coating has excellent synergistic antibacterial activity to prolong the shelf-life of food. It not only has good thermal stability but binds closely to the paper and its adhesion force reaches 628.9 nN. Besides, the ZIF-8/AgNPs@CMC coated paper has better mechanical properties, water vapor barrier, and resists water solubility. Interestingly, due to the confinement effect of ZIF-8, the cumulative release of AgNPs after 168 h is only 2.66 % to avoid possible food safety risks. Especially, the coating can be almost biodegraded in the soil after 30 days, which provides the possibility to replace the non-biodegradable coatings in food packaging.

Triphenylantimony(V) Catecholates of the Type (3-RS-4,6-DBCat)SbPh3-Catechol Thioether Derivatives: Structure, Electrochemical Properties, and Antiradical Activity

A new series of triphenylantimony(V) 3-alkylthio/arylthio-substituted 4,6-di-tert-butylcatecholates of the type (3-RS-4,6-DBCat)SbPh3, where R = n-butyl (1), n-hexyl (2), n-octyl (3), cyclopentyl (4), cyclohexyl (5), benzyl (6), phenyl (7), and naphthyl-2 (8), were synthesized from the corresponding catechol thioethers and Ph3SbBr2 in the presence of a base. The crystal structures of 1, 2, 3, and 5 were determined by single-crystal X-ray analysis. The coordination polyhedron of 1-3 is better described as a tetragonal pyramid with a different degree of distortion, while that for 5- was a distorted trigonal bipyramid (τ = 0.014, 0.177, 0.26, 0.56, respectively). Complexes demonstrated different crystal packing of molecules. The electrochemical oxidation of the complexes involved the catecholate group as well as the thioether linker. The introduction of a thioether fragment into the aromatic ring of catechol ligand led to a shift in the potential of the "catechol/o-semiquinone" redox transition to the anodic region, which indicated the electron-withdrawing nature of the RS group. The radical scavenging activity of the complexes was determined in the reaction with DPPH radical.

Strategy to Chemically Decorate Nanopores of a Carbon Membrane for Filtrating Polyphenolics from Ethanol

This study invents a post-pyrolysis modification approach to render the resulting carbon membrane (CM) competent for organic solvent nanofiltration (OSN). A bitumen coating on a porous stainless-steel disk (PSD) serves as the precursor for the intended carbon membrane (CM), which is attained through pyrolysis in Ar. The bitumen coating casts dual-pore networks in the CM because of the dominant asphaltene constituent in bitumen. The subsequent chemical decoration of CM was pursued through the following protocol: dopamine (DA) was deployed in the nanopores of CM via pressurized infiltration and followed by Tris buffer passes through to trigger in situ conversion of DA to polydopamine (PDA), which was affixed over the pore walls to furnish chemical affinity (termed as CM_PDA). Additionally, the catechol moiety of PDA was arranged to chelate with the Zn²⁺ ion, aiming to trim the -OH anchor (termed as CM_PDA-Zn) to probe the effect of chelate on separation. The three membranes (CM, CM_PDA, and CM_PDA-Zn) were thereafter assessed by the separation of ethanol or isopropanol from phenolics [tannic acid (TA)/tetracycline (TC)]. A significantly improved OSN performance [rejection (%) ↔ permeance (L/(m²·h·bar))] of CM vs CM_PDA was observed: (i) for TA feed, 13% ↔ 85 L/(m²·h·bar) vs 83% ↔ 12 L/(m²·h·bar); and (ii) for TC feed, 20% ↔ 78 L/(m²·h·bar) vs 78% ↔ 12 L/(m²·h·bar). Compared to CM_PDA, CM_PDA-Zn further advances the rejection performance (∼89% for TA and ∼80% for TC) over 50 h separation. They are benchmarked by the latest literature results. The performance enhancements can be attributed to the spreading of PDA or PDA-Zn sites in the dual-pore networks, so that they are able to offer H-bonding and steric blocking roles, a chemicomechanical effect, to seize solute molecules over pore walls. It is this interfacial drag effect that sustains the solute rejection.

Polyfunctional Sterically Hindered Catechols with Additional Phenolic Group and Their Triphenylantimony(V) Catecholates: Synthesis, Structure, and Redox Properties

New polyfunctional sterically hindered 3,5-di-tert-butylcatechols with an additional phenolic group in the sixth position connected by a bridging sulfur atom—(6-(CH₂-S-tBu₂Phenol)-3,5-DBCat)H₂ (L₁), (6-(S-tBu₂Phenol)-3,5-DBCat)H₂ (L₂), and (6-(S-Phenol)-3,5-DBCat)H₂ (L₃) (3,5-DBCat is dianion 3,5-di-tert-butylcatecolate)—were synthesized and characterized in detail. The exchange reaction between catechols L₁ and L₃ with triphenylantimony(V) dibromide in the presence of triethylamine leads to the corresponding triphenylantimony(V) catecholates (6-(CH₂-S-tBu₂Phenol)-3,5-DBCat)SbPh₃ (1) and (6-(S-Phenol)-3,5-DBCat)SbPh₃ (2). The electrochemical properties of catechols L₁–L₃ and catecholates 1 and 2 were investigated using cyclic voltammetry. The electrochemical oxidation of L₁–L₃ at the first stage proceeds with the formation of the corresponding o-benzoquinones. The second process is the oxidation of the phenolic moiety. Complexes 1 and 2 significantly expand their redox capabilities, owing to the fact that they can act as the electron donors due to the catecholate metallocycle capable of sequential oxidations, and as donors of the hydrogen atoms, thus forming a stable phenoxyl radical. The molecular structures of the free ligand L₁ and complex 1 in the crystal state were determined by single-crystal X-ray analysis.

Polydopamine Surface Chemistry: A Decade of Discovery

Polydopamine is one of the simplest and most versatile approaches to functionalizing material surfaces, having been inspired by the adhesive nature of catechols and amines in mussel adhesive proteins. Since its first report in 2007, a decade of studies on polydopamine molecular structure, deposition conditions, and physicochemical properties have ensued. During this time, potential uses of polydopamine coatings have expanded in many unforeseen directions, seemingly only limited by the creativity of researchers seeking simple solutions to manipulating surface chemistry. In this review, we describe the current state of the art in polydopamine coating methods, describe efforts underway to uncover and tailor the complex structure and chemical properties of polydopamine, and identify emerging trends and needs in polydopamine research, including the use of dopamine analogs, nitrogen-free polyphenolic precursors, and improvement of coating mechanical properties.

In situ insights into the nanoscale deposition of 5,6-dihydroxyindole-based coatings and the implications on the underwater adhesion mechanism of polydopamine coatings

The biomimetic coating polydopamine (PDA) has emerged as a promising coating material for various applications. However, the mechanism of PDA deposition onto surfaces is not fully understood, and the coating components of PDA and its relation to the putative intermediate 5,6-dihydroxyindole (DHI) are still controversial. This investigation discloses the deposition mechanisms of dopamine (DA)-based coatings and DHI-based coatings onto silicon surfaces by monitoring the nanoscale deposition of both coatings in situ using high-precision ellipsometry. We posit that the rapid and instantaneous nano-deposition of PDA coatings onto silicon surface in the initial stages critically involves the oxidation of DHI and/or its related oligomers. Our studies also show that the slow conversion of DA to DHI in PDA solution and the coupling between DA and DHI-derived precursors could be crucial for subsequent PDA coating growth. These findings elucidate the critical role of DHI, acting as an ‘initiator’ and a ‘cross linker’, in the PDA coating formation. Overall, our study provides important information on the early stage nano-deposition behavior in the construction of PDA coatings and DHI-based coatings.

The underwater in situ nano-deposition studies of 5,6-dihydroxyindole (DHI) have provided new insights into the controversial deposition mechanism(s) of DHI-based and polydopamine-based coatings.

Supramolecular Photoactivatable Anticancer Hydrogels

A photoactivatable dopamine-conjugated platinum(IV) anticancer complex (Pt-DA) has been incorporated into G-quadruplex G₄K⁺ borate hydrogels by using borate ester linkages (Pt-G₄K⁺B hydrogel). These were characterized by ¹¹B NMR, attenuated total reflection Fourier transform infrared spectroscopy, circular dichroism, scanning electron microscopy and transmission electron microscopy. Microscopy investigations revealed the transformation of an extended fiber assembly into discrete flakes after incorporation of Pt-DA. Pt-DA showed photocytotoxicity against cisplatin-resistant A2780Cis human ovarian cancer cells (IC₅₀ 74 μM, blue light) with a photocytotoxic index <2, whereas Pt-G₄K⁺B hydrogels exhibited more potent photocytotoxicity (IC₅₀ 3 μM, blue light) with a photocytotoxic index >5. Most notably, Pt-DA and Pt-G₄K⁺B hydrogels show selective phototoxicity for cancer cells versus normal fibroblast cells (MRC5).

Tuning underwater adhesion with cation-π interactions

Cation-π interactions drive the self-assembly and cohesion of many biological molecules, including the adhesion proteins of several marine organisms. Although the origin of cation-π bonds in isolated pairs has been extensively studied, the energetics of cation-π-driven self-assembly in molecular films remains uncharted. Here we use nanoscale force measurements in combination with solid-state NMR spectroscopy to show that the cohesive properties of simple aromatic- and lysine-rich peptides rival those of the strong reversible intermolecular cohesion exhibited by adhesion proteins of marine mussel. In particular, we show that peptides incorporating the amino acid phenylalanine, a functional group that is conspicuously sparing in the sequences of mussel proteins, exhibit reversible adhesion interactions significantly exceeding that of analogous mussel-mimetic peptides. More broadly, we demonstrate that interfacial confinement fundamentally alters the energetics of cation-π-mediated assembly: an insight that should prove relevant for diverse areas, which range from rationalizing biological assembly to engineering peptide-based biomaterials.

Amphiphilic acrylamide block copolymer: RAFT block copolymerization and monolayer behaviour

Amphiphilic acrylamide block copolymer, synthesized by RAFT polymerization, takes a stable monolayer formation with phase-separated structures at the air–water interface.

Calcium-Mediated Control of Polydopamine Film Oxidation and Iron Chelation

The facile preparation of conformal polydopamine (PDA) films on broad classes of materials has prompted extensive research into a wide variety of potential applications for PDA. The constituent molecular species in PDA exhibit diverse chemical moieties, and therefore highly variable properties of PDA-based devices may evolve with post-processing conditions. Here we report the use of redox-inactive cations for oxidative post-processing of deposited PDA films. PDA films incubated in alkaline CaCl₂ solutions exhibit accelerated oxidative evolution in a dose-dependent manner. PDA films incubated in CaCl₂ solutions exhibit 53% of the oxidative charge transfer compared to pristine PDA films. Carboxylic acid groups generated from the oxidation process lower the isoelectric point of PDA films from pH = 4.0 ± 0.2 to pH = 3.1 ± 0.3. PDA films exposed to CaCl₂ solutions during post-processing also enhance Fe2+/Fe3+ chelation compared to pristine PDA films. These data illustrate that the molecular heterogeneity and non-equilibrium character of as-deposited PDA films afford control over the final composition by choosing post-processing conditions, but also demands forethought into how the performance of PDA-incorporated devices may change over time in salt solutions.

Remarkably enhanced adhesion of coherently aligned catechol-terminated molecules on ultraclean ultraflat gold nanoplates

We report the characterization and formation of catechol-terminated molecules immobilized on gold nanoplates (Au NPLs) using N-(3,4-dihydroxyphenethyl)-2-mercaptoacetamide (Cat-EAA-SH). Single-crystalline Au NPLs, synthesized using a one-step chemical vapor transport method, have ultraclean and ultraflat surfaces that make Cat-EAA-SH molecules aligned into a well-ordered network of a large-scale. Topographic study of the catechol-terminated molecules on Au NPLs using atomic force microscopy showed more orderly orientation and higher density, leading to significantly higher adhesion as observed from local force-distance curves than those on other Au surfaces. These coherently aligned catechol-terminated molecules on the atomically smooth gold surface led to significanty more reproducible and thus more physico-chemically meaningful measurements than was possible before by employing rough gold surfaces.

Multimodal underwater adsorption of oxide nanoparticles on catechol-based polymer nanosheets

Multimodal underwater adsorption behaviour of catechol units was demonstrated by examining the adsorption of different oxide nanoparticles on nanoscale-integrated polymer nanosheets. Catechol-based polymer nanosheets were fabricated using the Langmuir-Blodgett (LB) technique with random copolymers (p(DDA/DMA)s) of N-dodecylacrylamide (DDA) and dopamine methacrylamide (DMA). The p(DDA/DMA) nanosheets were immersed into water dispersions of SiO2, Al2O3, and WO3 nanoparticles (NPs) respectively. The results show that the adsorption properties can be altered by varying the NP type: SiO2 NP adsorption was observed only below pH = 6, at which the o-quinone form in p(DDA/DMA) nanosheets transforms into the catechol form or vice versa. However, their transition point for Al2O3 NP adsorption was found at approximately pH 10, at which the surface potential of Al2O3 NPs changes the charge polarity, indicating that the electrostatic interaction is predominant. For WO3 NPs, adsorption was observed when citric acid, which modifies the surface of WO3 NPs by complex formation, was used as a pH-controlling agent, but no adsorption was found for hydrochloric acid used as a pH controlling agent. FT-IR measurements proved that miniscule amounts of water molecules were trapped in p(DDA/DMA) nanosheets and that they acquired hydrogen bonding network formations, which might assist nanoparticle adsorption underwater and make the catechol units adjustable. The results indicate that the nanoscale spatial arrangements of catechol units in films are crucially important for the application of multimodal adsorption of oxide nanoparticles on catechol-based polymer materials.

Enhanced Collective Magnetic Properties in 2D Monolayers of Iron Oxide Nanoparticles Favored by Local Order and Local 1D Shape Anisotropy

Magnetic nanoparticle arrays represent a very attractive research field because their collective properties can be efficiently modulated as a function of the structure of the assembly. Nevertheless, understanding the way dipolar interactions influence the intrinsic magnetic properties of nanoparticles still remains a great challenge. In this study, we report on the preparation of 2D assemblies of iron oxide nanoparticles as monolayers deposited onto substrates. Assemblies have been prepared by using the Langmuir-Blodgett technique and the SAM assisted assembling technique combined to CuAAC "click" reaction. These techniques afford to control the formation of well-defined monolayers of nanoparticles on large areas. The LB technique controls local ordering of nanoparticles, while adjusting the kinetics of CuAAC "click" reaction strongly affects the spatial arrangement of nanoparticles in monolayers. Fast kinetics favor disordered assemblies while slow kinetics favor the formation of chain-like structures. Such anisotropic assemblies are induced by dipolar interactions between nanoparticles as no magnetic field is applied and no solvent evaporation is performed. The collective magnetic properties of monolayers are studied as a function of average interparticle distance, local order and local shape anisotropy. We demonstrate that local control on spatial arrangement of nanoparticles in monolayers significantly strengthens dipolar interactions which enhances collective properties and results in possible super ferromagnetic order.

Control of heterogeneous nucleation and growth kinetics of dopamine-melanin by altering substrate chemistry

Dopamine-melanin (DM or "polydopamine") can be deposited on virtually any substrate from solution through autoxidation of dopamine. The versatility of this process has allowed surface-mediated assembly of DM for a wide variety of functional coatings. Here we report the impact of well-defined surface chemistries on the nucleation and growth of such films. DM was deposited on silicon dioxide (SiO2) and SiO2 substrates modified with self-assembled monolayers (SAMs) bearing octadecyl (C18), phenethyl, and aminopropyl functional groups. Atomic force microscopy revealed three-dimensional islands whose areal density and surface coverage are lowest on bare SiO2 substrates and highest on the neutral aromatic and aliphatic substrates. Increasing the pH of the solution from 8.2 to 10 dissociates catechol moieties in DM and inhibits adsorption on negatively charged SiO2 substrates. The growth rate of DM films on SAM-modified SiO2 is maximized at pH 9.5 and almost completely abolished at pH 10 because of increased DM solubility. The initial rates of DM adsorption were measured using quartz crystal microbalance with dissipation measurements. The initial adsorption rate is proportional to the nucleation density, which increases as the hydrophobicity of the substrate increases. Taken together, these data provide insight into the rates of heterogeneous nucleation and growth of DM on substrates with well-defined chemistries.

Flavonoid-modified surfaces: multifunctional bioactive biomaterials with osteopromotive, anti-inflammatory, and anti-fibrotic potential

Flavonoids are small polyphenolic molecules of natural origin with antioxidant, anti-inflammatory, and antibacterial properties. Here, a bioactive surface based on the covalent immobilization of flavonoids taxifolin and quercitrin on titanium substrates is presented, using (3-aminopropyl)triethoxysilane (APTES) as coupling agent. FTIR and XPS measurements confirm the grafting of the flavonoids to the surfaces. Using 2-aminoethyl diphenylborinate (DPBA, a flavonoid-specific dye), the modified surfaces are imaged by fluorescence microscopy. The bioactivity of the flavonoid-modified surfaces is evaluated in vitro with human umbilical cord derived mesenchymal stem cells (hUC-MSCs) and human gingival fibroblasts (HGFs) and compared to that of simple flavonoid coatings prepared by drop casting. Flavonoid-modified surfaces show anti-inflammatory and anti-fibrotic potential on HGF. In addition, Ti surfaces covalently functionalized with flavonoids promote the differentiation of hUC-MSCs to osteoblasts--enhancing the expression of osteogenic markers, increasing alkaline phosphatase activity and calcium deposition; while drop-casted surfaces do not. These findings could have a high impact in the development of advanced implantable medical devices like bone implants. Given the broad range of bioactivities of flavonoid compounds, these surfaces are ready to be explored for other biomedical applications, e.g., as stent surface or tumor-targeted functionalized nanoparticles for cardiovascular or cancer therapies.

Synthesis of polydopamine at the femtoliter scale and confined fabrication of Ag nanoparticles on surfaces

Polydopamine is synthesized in confined femtolitre sized droplets and used as green nanoreactors to fabricate Ag nanoparticles on surfaces.