Photothermal poly(N-isopropylacrylamide)/Fe3O4 nanocomposite hydrogel as a movable position heating source under remote control

Multifunctional scaffolds for bone repair following age-related biological decline: Promising prospects for smart biomaterial-driven technologies

The repair of large bone defects due to trauma, disease, and infection can be exceptionally challenging in the elderly. Despite best clinical practice, bone regeneration within contemporary, surgically implanted synthetic scaffolds is often problematic, inconsistent, and insufficient where additional osteobiological support is required to restore bone. Emergent smart multifunctional biomaterials may drive important and dynamic cellular crosstalk that directly targets, signals, stimulates, and promotes an innate bone repair response following age-related biological decline and when in the presence of disease or infection. However, their role remains largely undetermined. By highlighting their mechanism/s and mode/s of action, this review spotlights smart technologies that favorably align in their conceivable ability to directly target and enhance bone repair and thus are highly promising for future discovery for use in the elderly. The four degrees of interactive scaffold smartness are presented, with a focus on bioactive, bioresponsive, and the yet-to-be-developed autonomous scaffold activity. Further, cell- and biomolecular-assisted approaches were excluded, allowing for contemporary examination of the capabilities, demands, vision, and future requisites of next-generation biomaterial-induced technologies only. Data strongly supports that smart scaffolds hold significant promise in the promotion of bone repair in patients with a reduced osteobiological response. Importantly, many techniques have yet to be tested in preclinical models of aging. Thus, greater clarity on their proficiency to counteract the many unresolved challenges within the scope of aging bone is highly warranted and is arguably the next frontier in the field. This review demonstrates that the use of multifunctional smart synthetic scaffolds with an engineered strategy to circumvent the biological insufficiencies associated with aging bone is a viable route for achieving next-generation therapeutic success in the elderly population.

Bionic Fluorine-Free Multifunctional Photothermal Surface for Anti/de/Driving-Icing and Droplet Manipulation

Due to safety concerns associated with ice accumulation, there is a need to develop a durable surface with anti/de-icing properties. Inspired by Gecko skin and Nepenthes, a superhydrophobic photothermal surface (SH-PS) with micro-nano hierarchical structure based on carbon nanotube composites is prepared by one-step laser method. It can be switchable to a slippery photothermal surface (S-PS) by injecting silicone oil. S-PS can effectively delay icing at -20 °C/-30 °C, and maintain excellent dynamic anti-icing capabilities following 28 times supercooled droplet impact (-30 °C). Under near-infrared (NIR) irradiation, S-PS exhibits high-efficiency photothermal deicing and excellent ice droplet control capabilities. Furthermore, S-PS also exhibits remarkable droplet manipulation capabilities under NIR irradiation, even anti-gravity transport (8°) and programmable track manipulation. Notably, after 20 m abrasion, the S-PS still maintains good performances of anti/de-icing and droplet manipulation after infusing lubricant. All these excellent performances can promote its application in a wider range of fields.

Application of advanced biomaterials in photothermal therapy for malignant bone tumors

Malignant bone tumors are characterized by severe disability rate, mortality rate, and heavy recurrence rate owing to the complex pathogenesis and insidious disease progression, which seriously affect the terminal quality of patients' lives. Photothermal therapy (PTT) has emerged as an attractive adjunctive treatment offering prominent hyperthermal therapeutic effects to enhance the effectiveness of surgical treatment and avoid recurrence. Simultaneously, various advanced biomaterials with photothermal capacity are currently created to address malignant bone tumors, performing distinctive biological functions, including nanomaterials, bioceramics (BC), polymers, and hydrogels et al. Furthermore, PTT-related combination therapeutic strategies can provide more significant curative benefits by reducing drug toxicity, improving tumor-killing efficiency, stimulating anti-cancer immunity, and improving immune sensitivity relative to monotherapy, even in complex tumor microenvironments (TME). This review summarizes the current advanced biomaterials applicable in PTT and relevant combination therapies on malignant bone tumors for the first time. The multiple choices of advanced biomaterials, treatment methods, and new prospects for future research in treating malignant bone tumors with PTT are generalized to provide guidance. Malignant bone tumors seriously affect the terminal quality of patients' lives. Photothermal therapy (PTT) has emerged as an attractive adjunctive treatment enhancing the effectiveness of surgical treatment and avoiding recurrence. In this review, advanced biomaterials applicable in the PTT of malignant bone tumors and their distinctive biological functions are comprehensively summarized for the first time. Simultaneously, multiple PTT-related combination therapeutic strategies are classified to optimize practical clinical issues, contributing to the selection of biomaterials, therapeutic alternatives, and research perspectives for the adjuvant treatment of malignant bone tumors with PTT in the future.

Boosting Chemoselective Hydrogenation of Nitroaromatic via Synergy of Hydrogen Spillover and Preferential Adsorption on Magnetically Recoverable Pt@Fe2 O3

It is highly desired but challenging to design high performance catalyst for selective hydrogenation of nitro compounds into amino compounds. Herein, a boosting chemoselective hydrogenation strategy on Pt@Fe₂ O₃ is proposed with gradient oxygen vacancy by synergy of hydrogen spillover and preferential adsorption. Experimental and theoretical investigations reveal that the nitro is preferentially adsorbed onto oxygen vacancy of Pt@Fe₂ O₃ , meanwhile, the H₂ dissociated on Pt nanoparticles and then spillover to approach the nitro for selective hydrogenation (>99% conversion of 4-nitrostyrene, > 99% selectivity of 4-aminostyrene, TOF of 2351 h^-1 ). Moreover, the iron oxide support endows the catalyst magnetic retrievability. This high activity, selectivity, and easy recovery strategy provide a promising avenue for selective hydrogenation catalysis of various nitroaromatic.

A Power Compensation Strategy for Achieving Homogeneous Microstructures for 4D Printing Shape-Adaptive PNIPAM Hydrogels: Out-of-Plane Variations

In the last decade, 3D printing has attracted significant attention and has resulted in benefits to many research areas. Advances in 3D printing with smart materials at the microscale, such as hydrogels and liquid crystalline polymers, have enabled 4D printing and various applications in microrobots, micro-actuators, and tissue engineering. However, the material absorption of the laser power and the aberrations of the laser light spot will introduce a decay in the polymerization degree along the height direction, and the solution to this problem has not been reported yet. In this paper, a compensation strategy for the laser power is proposed to achieve homogeneous and high aspect ratio hydrogel structures at the microscale along the out-of-plane direction. Linear approximations for the power decay curve are adopted for height steps, discretizing the final high aspect ratio structures. The strategy is achieved experimentally with hydrogel structures fabricated by two-photon polymerization. Moreover, characterizations have been conducted to verify the homogeneity of the printed microstructures. Finally, the saturation of material property is investigated by an indirect 3D deformation method. The proposed strategy is proved to be effective and can be explored for other hydrogel materials showing significant deformation. Furthermore, the strategy for out-of-plane variations provides a critical technique to achieve 4D-printed homogeneous shape-adaptive hydrogels for further applications.

Transparent photothermal hydrogels for wound visualization and accelerated healing

Utilizing photothermal hydrogels as a wound dressing is a promising strategy to accelerate wound healing. Usually, a photothermal hydrogel has a strong light-absorbing capability, and hence its transparency can be largely sacrificed, which is unbeneficial for the visual monitoring of wound states. It remains challenging to balance the trade-off between the photothermal conversion and wound visualization for the photothermal hydrogel dressing. Herein, a composite photothermal hydrogel film with high transparency is presented for the visual monitor of the wound, which is constructed by incorporating CsxWO3 nanorods into the networks of polyacrylamide hydrogels. The composite photothermal hydrogel film exhibits high light absorption in the near-infrared region and high transmittance in the visible light region. Under 980 nm laser irradiation, the composite hydrogel can be heated up to 45 °C. In vivo animal experiment on mouse skin wound model shows that the composite hydrogel film can locally heat the skin wound to accelerate healing while maintaining more than 70% transparency to realize real-time observation of the wound. This study provides the first attempt to solve the problem of opacity in photothermal hydrogel dressings, promoting the possibility of its clinical applications.

A Shift from Efficiency to Adaptability: Recent Progress in Biomimetic Interactive Soft Robotics in Wet Environments

Research field of soft robotics develops exponentially since it opens up many imaginations, such as human-interactive robot, wearable robots, and transformable robots in unpredictable environments. Wet environments such as sea and in vivo represent dynamic and unstructured environments that adaptive soft robots can reach their potentials. Recent progresses in soft hybridized robotics performing tasks underwater herald a diversity of interactive soft robotics in wet environments. Here, the development of soft robots in wet environments is reviewed. The authors recapitulate biomimetic inspirations, recent advances in soft matter materials, representative fabrication techniques, system integration, and exemplary functions for underwater soft robots. The authors consider the key challenges the field faces in engineering material, software, and hardware that can bring highly intelligent soft robots into real world.

Smart near infrared-responsive nanocomposite hydrogels for therapeutics and diagnostics

Nanocomposite (NC) hydrogels are emerging biomaterials that possess desirable and defined properties and functions for therapeutics and diagnostics. Particularly, nanoparticles (NPs) are employed as stimulus-transducers in NC hydrogels to facilitate the treatment process by providing controllable structural change and payload release under internal and external simulations. Among the various external stimuli, near-infrared (NIR) light has attracted considerable interest due to its minimal photo-damage, deep tissue penetration, low auto-fluorescence in living systems, facile on/off switch, easy remote and spatiotemporal control. In this study, we discuss four types of transducing nanomaterials used in NIR-responsive NC hydrogels, including metal-based nanoparticles, carbon-based nanomaterials, polydopamine nanoparticles (PDA NPs), and upconversion nanoparticles (UCNPs). This review provides an overview of the current progress in NIR-responsive NC hydrogels, focusing on their preparation, properties, applications, and future prospects.

Two-Dimensional MoO2 Nanosheet Composite Hydrogels with High Transmittance and Excellent Photothermal Property for Near-Infrared Responsive Actuators and Microvalves

Stimulus-responsive intelligent hydrogel actuators have highly promising applications in the fields of soft robotics, smart manipulators, and flexible devices. Near-infrared (NIR) light is considered an ideal method to trigger the response behavior remotely and precisely. In order to realize the excellent optical transmittance and photothermal property of NIR-responsive hydrogels at the same time, two-dimensional nonlayered MoO₂ nanosheets (2D-MoO₂) with excellent photothermal efficiency (62% under an NIR light irradiation of 808 nm), splendid chemistry stability, and low preparation cost are used as photothermal agents and incorporated into the poly(N-isopropylacrylamide) (PNIPAM) hydrogel network, forming the 2D-MoO₂/Laponite/PNIPAM ternary nanocomposite hydrogel (TN hydrogel). It is remarkable that compared with the GO and MXene hydrogels with the same agent content (1.0 mg mL^-1) and thickness (1 mm) whose transmittance values are only ∼5% at 600 nm, the TN hydrogel shows a similar NIR-responsive temperature, but much higher optical transmittance (∼53%). Besides, of the three hydrogels with similar transmittance, the TN hydrogel shows a much higher NIR-responsive temperature. The TN hydrogel with a low loading of 2D-MoO₂ (1.5 mg mL^-1) can produce a significant temperature increase of ∼30 °C after the application of 0.8 W cm^-2 NIR light irradiation for 15 s. Impressively, the TN hydrogel exhibits excellent anti-fatigue property, keeping a fast response and temperature rise behavior even after 50 times of heating-cooling cycles. The flexibly controllable and reversible deformation is realized by a well-designed bilayer structure even in harsh environments. The transparent and asymmetric bilayer hydrogel is further used as a soft manipulator to capture objects visually and accurately. The NIR light-controlled microvalve based on this composite hydrogel is also demonstrated. This work provides a novel kind of transparent hybrid NIR response hydrogel for the further development of smart, programmable, reversible hydrogel-based actuators and soft robotics.

A Bioinspired Elastic Hydrogel for Solar-Driven Water Purification

The global demand for clean and safe water will continue to grow well into the 21st century. Moving forward, the lack of access to clean water, which threatens human health and strains precious energy resources, will worsen as the climate changes. Therefore, future innovations that produce potable water from contaminated sources must be sustainable. Inspired by nature, a solar absorber gel (SAG) is developed to purify water from contaminated sources using only natural sunlight. The SAG is composed of an elastic thermoresponsive poly(N-isopropylacrylamide) (PNIPAm) hydrogel, a photothermal polydopamine (PDA) layer, and a sodium alginate (SA) network. Production of the SAG is facile; all processing is aqueous-based and occurs at room temperature. Remarkably, the SAG can purify water from various harmful reservoirs containing small molecules, oils, metals, and pathogens, using only sunlight. The SAG relies on solar energy to drive a hydrophilic/hydrophobic phase transformation at the lower critical solution temperature. Since the purification mechanism does not require water evaporation, an energy-intensive process, the passive solar water-purification rate is the highest reported. This discovery can be transformative in the sustainable production of clean water to improve the quality of human life.

Understanding and advancement in gold nanoparticle targeted photothermal therapy of cancer

The present communication summarizes the importance, understanding and advancement in the photothermal therapy of cancer using gold nanoparticles. Photothermal therapy was used earlier as a single line therapy, but using a combination of photothermal therapy with other therapies like immunotherapy, chemotherapy, photodynamic therapy; efficient therapy management can be achieved. As it was discussed in many studies that gold nanoparticles are treated as idyllic photothermal transducers due to their structural dimensions, which enables them to strongly absorb near infrared light. Gold nanoparticles which are mediated for photothermal therapy can warn cancer cells to chemotherapy, regulate genes and immunotherapy by enhancing the cell permeability and intracellular delivery. The necrosis process and apoptosis depend on the power of laser and temperature within the cancerous tissues which are reached during irradiation. Cells death mechanism is also important because the cells which died through the process of necrosis can endorse secondary tumor growth while the cells which died through apoptosis may provoke the immune response to inhibit the development of secondary tumor growth. To decrease the in vivo barriers, gold nanostructures are again modified with targeting ligand and bio-responsive linker. The manuscript summarizes that the use of gold nanoparticles is capable of inhibiting the growth of cancerous cells by using photothermal therapy which has lesser adverse effects compared to other line therapies.

Cartilage Mimics Adaptive Lubrication

The natural cartilage layer exhibits excellent interface low friction and good load-bearing properties based on the mechanically controlled adaptive lubrication mechanism. Understanding and imitating such a mechanism is important for developing high-load-bearing water-lubrication materials. Here, we report the successful preparation of thermoresponsive layered materials by grafting a poly(3-sulfopropyl methacrylate potassium salt) (PSPMA) polyelectrolyte brush onto the subsurface of an initiator-embedded high strength hydrogel [poly(N-isopropylacrylamide-co-acrylic acid-co-initiator/Fe³⁺)] [P(NIPAAm-AA-iBr/Fe³⁺)]. The top soft hydrogel/brush composite layer provides aqueous lubrication, while the bottom thermoresponsive hydrogel layer exhibits adaptive load-bearing capacity that shows tunable stiff or modulus in response to the temperature above and below the lower critical solution temperature (LCST, 32.5 °C). An obvious friction-reduction feature is realized above the LCST, resulting from the dynamic increase of the bottom layer mechanical modulus. Furthermore, in situ lubrication-improvement behavior is achieved upon applying a near-infrared (NIR) laser onto the surface of Fe₃O₄ nanoparticle (NP)-integrated layered materials. Such a typical lubrication-regulated behavior can be attributed to the synergy effect of the improved load-bearing capacity of the bottom layer and the enhanced lubrication behavior of the top layer with an increase in the polyelectrolyte brush chain density, which is similar to the mechanically controlled adaptive lubrication mechanism of the natural cartilage layer. Current research results provide an inspiration for developing novel biomimetic lubrication materials with considerable load-bearing capacity and also propose a strategy for designing intelligent/stable friction-actuation devices.

Multiplexed tri-mode visual outputs of immunoassay signals on a clip-magazine-assembled photothermal biosensing disk

The photothermal biosensing principle is of increasing interest for point-of-care detection, but has rarely been applied in portable analytical devices in a lab-on-a-chip format. Herein, a photothermally responsive poly (methyl methacrylate) (PMMA)/paper hybrid disk (PT-Disk) was developed as a novel photothermal immunoassay device with the integration of a clip-magazine-assembled photothermal biosensing strategy. The PT-Disk consisted of a dissociative thermoresponsive hydrogel-loaded clip unit where the sandwich-type immunoreaction with an iron oxide-to-Prussian blue nanoparticle (PB NP) conversion took place and a magazine bearer for the rotational clip assembly and visual signal outputs. Upon laser irradiation of the clip-magazine-assembled PT-Disk, on-chip photothermal effect of PB NPs triggered both dose-dependent temperature elevation and the subsequent release of dye solutions from the central clip unit to surrounding magazine-bearing paper channels as the result of phase transition of the hydrogels, realizing multiplexed thermal image- and distance-based visual quantitative signal outputs in combination with the preliminary colorimetric readout on the PT-Disk. Using the multiplexed tri-mode signal outputs, the PT-Disk can quantify prostate specific antigen with limits of detection of 1.4-2.8 ng mL^-1. This is the first attempt to apply the photothermal biosensing principle in portable PMMA/paper-based analytical devices, which offers not only versatile on-chip visual quantitative signal outputs, but also the implementation of the photothermal biosensing principle in a lab-on-a-chip format.

Light-Responsive Inorganic Biomaterials for Biomedical Applications

Light-responsive inorganic biomaterials are an emerging class of materials used for developing noninvasive, noncontact, precise, and controllable medical devices in a wide range of biomedical applications, including photothermal therapy, photodynamic therapy, drug delivery, and regenerative medicine. Herein, a range of biomaterials is discussed, including carbon-based nanomaterials, gold nanoparticles, graphite carbon nitride, transition metal dichalcogenides, and up-conversion nanoparticles that are used in the design of light-responsive medical devices. The importance of these light-responsive biomaterials is explored to design light-guided nanovehicle, modulate cellular behavior, as well as regulate extracellular microenvironments. Additionally, future perspectives on the clinical use of light-responsive biomaterials are highlighted.

Spatiotemporally Controlled Multiplexed Photothermal Microfluidic Pumping under Monitoring of On-Chip Thermal Imaging

Intelligent contactless microfluidic pumping strategies have been increasingly desirable for operation of lab-on-a-chip devices. Herein, we present a photothermal microfluidic pumping strategy for on-chip multiplexed cargo transport in a contactless and spatiotemporally controllable fashion based on the application of near-infrared laser-driven photothermal effect in microfluidic paper-based devices (μPDs). Graphene oxide (GO)-doped thermoresponsive poly(N-isopropylacrylamide)-acrylamide hydrogels served as the photothermally responsive cargo reservoirs on the μPDs. In response to remote contactless irradiation by an 808 nm laser, on-chip phase transition of the composite hydrogels was actuated in a switchlike manner as a result of the photothermal effect of GO, enabling robust on-chip pumping of cargoes from the hydrogels to predefined arrays of reaction zones. The thermal imaging technique was employed to monitor the on-chip photothermal pumping process. The microfluidic pumping performance can be spatiotemporally controlled in a quantitative way by remotely tuning the laser power, irradiation time, and GO concentration. The pumping strategy was exemplified by FeCl₃ and horseradish peroxidase as the model cargoes to implement on-chip Prussian blue- and 3,3',5,5'-tetramethylbenzidine-based colorimetric reactions, respectively. Furthermore, multiplexed on-demand microfluidic pumping was achieved by flexibly adjusting the irradiation pathway and the microfluidic pattern. The new microfluidic pumping strategy shows great promise for diverse microfluidic applications due to its flexibility, high integratability into lab-on-a-chip devices, and contactless and spatiotemporal controllability.

Photothermal Microfluidic Sensing Platform Using Near-Infrared Laser-Driven Multiplexed Dual-Mode Visual Quantitative Readout

The application of different sensing principles in microfluidic devices opens up further possibilities for the development of point-of-care testing (POCT). Herein, the photothermal sensing principle is introduced in microfluidic paper-based analytical devices (μPADs) to develop a photothermal microfluidic sensing platform using near-infrared (NIR) laser-driven multiplexed dual-mode visual quantitative readout. Prussian blue (PB) as the analyte-associated photothermal agent was in situ synthesized in thermoresponsive poly(N-isopropylacrylamide) hydrogels to serve as the on-chip photothermal sensing element. The NIR laser-driven photothermal effect of PB triggered not only on-chip dose-dependent heat generation but also phase transition-induced dye release from the hydrogels, simultaneously enabling both thermal image- and distance-based dual-mode visual quantitative readout of the analyte concentration in a multiplexed manner. Both the on-chip temperature elevation value of the hydrogels and the traveling distance of released dye solutions were proportional to the concentration of PB. With the detection of silver ions in environmental water as a proof-of-concept study, the photothermal μPAD can detect silver ions at a concentration as low as 0.25 μM with high selectivity and satisfactory accuracy. The photothermal microfluidic sensing platform holds great potential for POCT with promising integratability and broad applicability, owing to the combination of synergistic advantages of the photothermal sensing principle, μPADs, and photothermally responsive hydrogels.

Fabrication of detonation nanodiamond@sodium alginate hydrogel beads and their performance in sunlight-triggered water release

Agricultural water use accounts for around 70% of total water use in the world. Enhancing agricultural water use efficiency is a key way to cope with water shortage. Here, sunlight-responsive hydrogel beads consisting of sodium alginate (SA) matrix and detonation nanodiamond (DND) were fabricated by an ion gelation technique, which has potential applications in controlled water release. The interaction between the DND and SA matrix was investigated by Fourier transform infrared (FTIR) spectra and X-ray diffraction (XRD). UV-vis diffuse reflectance spectra verified DND can absorb solar energy in the UV, visible and even near-infrared regions. DND dispersed in the hydrogel matrix can absorb sunlight and generate heat, increasing the temperature of the matrix and resulting in slow release of water from the elastic beads. In addition, the effects of DND content and pH were systematically studied to evaluate their water adsorption properties. The swelling kinetics of DND@SA hydrogel beads in distilled water could be fitted well with a pseudo-second-order kinetic model. Six consecutive cycles of water release-reswelling indicated that their easy regeneration and reusability. The novel and eco-friendly hydrogel beads should be applicable to on-demand, sequential, and long-term release of water via light exposure.

A near infrared-modulated thermosensitive hydrogel for stabilization of indocyanine green and combinatorial anticancer phototherapy

Indocyanine green (ICG), a multifunctional near-infrared (NIR) imaging agent approved by the FDA, has been extensively used in clinical cancer theranosis, but limited by its inherent instability, short plasma half-life and lack of targeting ability. Herein, an in situ formed photothermal network based thermosensitive hydrogel (PNT-gel) constructed by using supramolecular cross-linking conjugated polymers was developed for the stabilization of ICG and efficient combinatorial photothermal/photodynamic antitumor therapy. While the conjugated polymeric backbone in PNT-gel anchored the aromatic phototherapeutic agent ICG via π-π stacking interactions to avoid premature leakage, it also directly converted low-dose NIR light to induce localized hyperthermia to enhance the photothermal effect. The PNT-gel shows a reversible gel-to-sol upper critical solution temperature (UCST) that is slightly above body temperature. Therefore, the controlled release of ICG was switched on or off by NIR via photothermal-induced gel-sol transition. In vitro and in vivo antitumor experiments demonstrated that ICG loaded PNT-gel not only efficiently induced the killing of 4T1 cancer cells, but also achieved almost complete eradication of 4T1 cells by one-dose intratumoral injection in combinatorial photothermal/photodynamic therapy under irradiation of a low-dose 808 nm laser (0.14 W cm-2). Additionally, the combinational therapy proved to enhance the effectiveness of photodestruction without tumor recurrence compared with photothermal therapy (PTT) or photodynamic therapy (PDT) treatment alone.

Magnetic Responsive PVA Hydrogels for Remote Modulation of Protein Sorption

This work shows the ability to reversibly modulate the hydrophilicity of the hydrogels doped with iron oxide nanoparticles (MNPs) in a noninvasive way when exposed to a cyclic variation of the intensity (ON/OFF) of an external magnetic field. A reversible switching of surface contact angles was observed for magnetic PVA hydrogels when exposed to consecutive variation of the magnetic field intensity between 0 and 0.08 T. Motivated by the magnetic dependence of the hydrophilicity of these hybrid hydrogels, the impact of the magnetic field on protein sorption was also evaluated. The noninvasive regulation of protein sorption-released mechanisms was achieved by ON/OFF magnetic field switches, suggesting the possible influence of magnetic-induced hydrogel shrinking effect and changes of surface wettability on protein sorption. The capacity to magnetically modulate surface wettability and protein sorption make these magnetic hydrogels promising candidates for development of functional devices for tissue engineering, drug release applications, or biosensor systems, where the control of protein sorption and mobility are essential steps to improve the efficiency of these processes.

Continuous fabrication of near-infrared light responsive bilayer hydrogel fibers based on microfluidic spinning

Hydrogel microfibers with inhomogenous structure can achieve some complex motions such as bending, folding and twisting. So it can be applied to soft actuators, soft robots and micropumps. In this paper, continuous bilayer hydrogel fibers in which one layer is calcium alginate hydrogel and the other is linear poly(N-isopropylacrylamide) (PNIPAM)/calcium alginate/graphene oxide (GO) semi-interpenetrating hydrogel were prepared based on microfluidic spinning method. The results show that the bilayer hydrogel fibers have particular porous internal structures of semi-IPN hydrogels and the pore size becomes smaller with the increase of GO content. Besides, the bilayer hydrogel fibers can bend response to the temperature and near-infrared (NIR) light. The diameter of the hydrogel fibers can be tuned by changing the flow rate of spinning fluid and the take-up velocity of winding device.

Protein-Induced Gold Nanoparticle Assembly for Improving the Photothermal Effect in Cancer Therapy

Gold nanoparticles (AuNPs) are promising photothermal agents for cancer therapy. However, the absorption of spherical AuNPs is weak in the desired tissue-penetrating near-infrared (NIR) window, resulting in low photothermal efficiency within this window. Here, we show that fibrous nanostructures assembled from spherical AuNPs since the templating effect of silk fibroin (SF) could red-shift the optical absorption to NIR and thus present improved photothermal efficiency within the NIR window. Specifically, negatively charged SF, a protein derived from Bombyx mori, was assembled into nanofibers due to the interaction with the positively charged AuNPs and concomitantly templated the AuNPs into fibrous nanostructures. The resultant AuNPs/SF nanofibers presented higher NIR light absorption at 808 nm and higher photothermal efficiency under 808 nm NIR irradiation than nonassembled AuNPs. In vitro and in vivo analyses proved that AuNPs/SF nanofibers could efficiently kill breast cancer cells and destruct breast cancer tumor tissues under one-time NIR irradiation for 6 min by photothermal therapy (PTT) but nonassembled AuNPs could not. This work suggests that the self-assembled AuNPs/SF nanofibers are effective photosensitizers for PTT, and biotemplated assembly of photothermal agents into highly ordered nanostructures is a promising approach to increasing the PTT efficiency.

Bubble-Enabled Underwater Motion of a Light-Driven Motor

This work reports the photothermally driven horizontal motion of a motor as well as the suspending and vertical movements underwater. A motor is designed by attaching two polydimethylsiloxane-coated oxidized copper foams (POCF) to the two opposite sides of an oxidized copper foam (OCF). When the hydrophobic POCF is immersed in water, it serves as both an air bubble trapper and a light-to-heat conversion center. As bubbles grow under photothermal heating, they provide lifting force and result in the revolving motion of the motor. With removal of light illumination, bubbles are cooled by the surrounding water and shrink, and the buoyance is lowered. The resultant force of gravitational force, buoyance, and fluid resistance drives the motor to move forward horizontally. Furthermore, the motors are utilized as oil collectors and oil/water separation is achieved successfully. To effectively control the suspending motion, a polydimethylsiloxane foam doped with carbon black (C-foam) is designed under the photothermal principle. It is maintained at a certain position underwater by controlling the on/off of light. The vertical motion is also studied and utilized to generate electricity. It is expected that different types of underwater motion will open up new opportunities for various applications including drug delivery, collection of heavy oil underwater, and electricity generation.

Poly(N-isopropylacrylamide)/polydopamine/clay nanocomposite hydrogels with stretchability, conductivity, and dual light- and thermo- responsive bending and adhesive properties

Conducting hydrogels have attracted attention as a special functional class of smart soft materials and have found applications in various advanced fields. However, acquiring all the characteristics such as conductivity, adequate adhesiveness, self-healing ability, stretchability, biocompatibility, and stimulating deformation responsiveness still remains a challenge. Inspired by the mechanism of bioadhesion in marine mussels, a multifunctional nanocomposite hydrogel with excellent adhesiveness to a broad range of substrates including human skin was developed with the help of synergistic multiple coordination bonds between clay, poly(N-isopropylacrylamide) (PNIPAM), and polydopamine nanoparticles (PDA-NPs). The prepared hydrogel showed controllable near-infrared (NIR) responsive deformation after incorporation of PDA-NPs as highly effective photothermal agents in the thermo-sensitive PNIPAM network. Meanwhile, the fabricated nanocomposite hydrogels showed excellent stretchability and conductivity, which make them attractive material candidates for application in various fields, such as electronic skin, wearable devices, and so on.

Multifunctional NaYF4:Yb,Er@PE3@Fe3O4 nanocomposites for magnetic-field-assisted upconversion imaging guided photothermal therapy of cancer cells

Magnetic-field-assisted sensitive upconversion luminescence imaging and enhanced photothermal therapeutic efficacy were achieved with multifunctional NaYF₄:Yb,Er@PE3@Fe₃O₄ nanocomposites.

Remote Control over Underwater Dynamic Attachment/Detachment and Locomotion

Despite extensive efforts to mimic the fascinating adhesion capability of geckos, the development of reversible adhesives underwater has long been lagging. The appearance of mussels-inspired dopamine chemistry has provided the feasibility to fabricate underwater adhesives; however, for such a system, imitating the reversible and fast dynamic attachment/detachment mechanism of gecko feet still remains unsolved. Here, by synthesizing a thermoresponsive copolymer of poly(dopamine methacrylamide-co-methoxyethyl-acrylate-co-N-isopropyl acrylamide) and then decorating it onto mushroom-shaped poly(dimethylsiloxane) pillar arrays, a novel underwater thermoresponsive gecko-like adhesive (TRGA) can be fabricated, yielding high adhesion during the attachment state above the lower critical solution temperature (LCST) of the copolymer, yet low adhesion during the detachment state below the LCST of the copolymer. By integrating the Fe₃ O₄ nanoparticles into the TRGA, TRGAs responsive to near-infrared laser radiation can be engineered, which can be successfully used for rapid and reversible remote control over adhesion so as to capture and release heavy objects underwater because of the contrast force change of both the normal adhesion force and the lateral friction force. It is also demonstrated that the material can be assembled on the tracks of an underwater mobile device to realize controllable movement. This opens up the door for developing intelligent underwater gecko-like locomotion with dynamic attachment/detachment ability.

Carbon Nanotubes Reinforced Maleic Anhydride-Modified Xylan-g-Poly(N-isopropylacrylamide) Hydrogel with Multifunctional Properties

Introducing multifunctional groups and inorganic material imparts xylan-based hydrogels with excellent properties, such as responsiveness to pH, temperature, light, and external magnetic field. In this work, a composite hydrogel was synthesized by introducing acid treated carbon nanotubes (AT-CNTs) into the maleic anhydride modified xylan grafted with poly(N-isopropylacrylamide) (MAX-g-PNIPAM) hydrogels network. It was found that the addition of AT-CNTs affected the MAX-g-PNIPAM hydrogel structure, the swelling ratio and mechanical properties, and imparted the hydrogel with new properties of electrical conductivity and near infrared region (NIR) photothermal conversion. AT-CNTs could reinforce the mechanical properties of MAX-g-PNIPAM hydrogels, being up to 83 kPa for the compressive strength when the amount was 11 wt %, which was eight times than that of PNIPAM hydrogel and four times than that of MAX-g-PNIPAM hydrogel. The electroconductibility was enhanced by the increase of AT-CNTs amounts. Meanwhile, the composite hydrogel also exhibited multiple shape memory and NIR photothermal conversion properties, and water temperature was increased from 26 °C to 56 °C within 8 min under the NIR irradiation. Thus, the AT-CNTs reinforced MAX-g-PNIPAM hydrogel possessed promising multifunctional properties, which offered many potential applications in the fields of biosensors, thermal-arrest technology, and drug-controlled release.

Near infrared photothermal-responsive poly(vinyl alcohol)/black phosphorus composite hydrogels with excellent on-demand drug release capacity

Novel PVA/pBP hydrogels with highly effective NIR-responsive drug release performance, robust mechanical properties and good biocompatibility were prepared.

Near-Infrared Trigged Stimulus-Responsive Photonic Crystals with Hierarchical Structures

Stimuli-responsive photonic crystals (PCs) trigged by light would provide a novel intuitive and quantitative method for noninvasive detection. Inspired by the flame-detecting aptitude of fire beetles and the hierarchical photonic structures of butterfly wings, we herein developed near-infrared stimuli-responsive PCs through coupling photothermal Fe₃O₄ nanoparticles with thermoresponsive poly(N-isopropylacrylamide) (PNIPAM), with hierarchical photonic structured butterfly wing scales as the template. The nanoparticles within 10 s transferred near-infrared radiation into heat that triggered the phase transition of PNIPAM; this almost immediately posed an anticipated effect on the PNIPAM refractive index and resulted in a composite spectrum change of ∼26 nm, leading to the direct visual readout. It is noteworthy that the whole process is durable and stable mainly owing to the chemical bonding formed between PNIPAM and the biotemplate. We envision that this biologically inspired approach could be utilized in a broad range of applications and would have a great impact on various monitoring processes and medical sensing.

Nanostructured biogel templated synthesis of Fe3O4 nanoparticles and its application for catalytic degradation of xylenol orange

Using jellyfish mesoglea as a natural template, nanocomposite hydrogels with well-dispersed Fe₃O₄ nanoparticles are obtained.

Rational design of thermo-responsive adsorbents: demand-oriented active sites for the adsorption of dyes

A smart adsorbent is fabricated by incorporating a di-block copolymer through the combination of thermo-responsive groups and demand-oriented active sites into mesoporous silica for temperature swing adsorption of dyes.

Polydopamine Nanoparticles Modulating Stimuli-Responsive PNIPAM Hydrogels with Cell/Tissue Adhesiveness

Stimuli-responsive hydrogels can respond to stimuli by phase transformation or volume change and exhibit specific functions. Near-infrared (NIR)-responsive hydrogel is a type of stimuli-responsive hydrogel, which can be precisely controlled by altering the radiation intensity, exposure time of the light source, and irradiation sites. Here, polydopamine nanoparticles (PDA-NPs) were introduced into a poly(N-isopropylacrylamide) (PNIPAM) network to fabricate a PDA-NPs/PNIPAM hydrogel with NIR responsibility, self-healing ability, and cell/tissue adhesiveness. After incorporation of PDA-NPs into the hydrogel, the PDA-NPs/PNIPAM hydrogel showed phase transitions and volume changes in response to NIR. Thus, the hydrogel can achieve triple response effects, including pulsatile drug release, NIR-driven actuation, and NIR-assisted healing. After coating PDA-NPs onto hydrogel surfaces, the hydrogel showed improved cell affinity, good tissue adhesiveness, and growth factor/protein immobilization ability because of reactive catechol groups on PDA-NPs. The tissue adhesion strength to porcine skin was as high as 90 KPa. In vivo full-skin defect experiments demonstrated that PDA-NPs coating on the hydrogel and an immobilized growth factor had a synergistic effect on accelerating wound healing. In summary, we combined thermosensitive PNIPAM and mussel-inspired PDA-NPs to form a NIR-responsive hydrogel, which may have potential applications for chemical and physical therapies.

Synthesis of Acylated Xylan-Based Magnetic Fe₃O₄ Hydrogels and Their Application for H₂O₂ Detection

Acylated xylan-based magnetic Fe₃O₄ nanocomposite hydrogels (ACX-MNP-gels) were prepared by fabricating Fe₃O₄ nanoctahedra in situ within a hydrogel matrix which was synthesized by the copolymerization of acylated xylan (ACX) with acrylamide and N-isopropylacrylamide under ultraviolet irradiation. The size of the Fe₃O₄ fabricated within the hydrogel matrix could be adjusted through controlling the crosslinking concentrations (C). The magnetic hydrogels showed desirable magnetic and mechanical properties, which were confirmed by XRD, Raman spectroscopy, physical property measurement system, SEM, TGA, and compression test. Moreover, the catalytic performance of the magnetic hydrogels was explored. The magnetic hydrogels (C = 7.5 wt %) presented excellent catalytic activity and provided a sensitive response to H₂O₂ detection even at a concentration level of 5 × 10^-6 mol·L^-1. This approach to preparing magnetic hydrogels loaded with Fe₃O₄ nanoparticles endows xylan-based hydrogels with new promising applications in biotechnology and environmental chemistry.

Magnetite-Loaded Thermosensitive Nanogels for Bioinspired Lubrication and Multimodal Friction Control

The ability to control friction is quite attractive for many applications. Other than mechanical/physical methods to control friction, this letter shows how materials chemistry can regulate friction effectively. Magnetite-loaded thermosensitive poly(N-isopropylacrylamide) nanogels (Fe₃O₄@PNIPAM) were synthesized as nanoparticulate soft matter to reduce friction when it is used as an additive in aqueous lubricant. Interestingly, friction can be multiply regulated by temperature, magnetism, and near-infrared light through manipulating the colloidal properties of multifunctional composite nanogels in bulk solution and at the frictional interface.

Selective adsorption and efficient regeneration via smart adsorbents possessing thermo-controlled molecular switches

A new generation of adsorbents possessing thermo-controlled molecular switches was fabricated and consequently realized selective adsorption and efficient desorption simultaneously.

Near-Infrared Light-Responsive Poly(N-isopropylacrylamide)/Graphene Oxide Nanocomposite Hydrogels with Ultrahigh Tensibility

Novel near-infrared (NIR) light-responsive poly(N-isopropylacrylamide)/graphene oxide (PNIPAM-GO) nanocomposite hydrogels with ultrahigh tensibility are prepared by incorporating sparse chemical cross-linking of small molecules with physical cross-linking of graphene oxide (GO) nanosheets. Combination of the GO nanosheets and thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) polymeric networks provides the hydrogels with an excellent NIR light-responsive property. The ultrahigh tensibility of PNIPAM-GO nanocomposite hydrogels is achieved by simply using a very low concentration of N,N'-methylenebis(acrylamide) (BIS) molecules as chemical cross-linkers to generate a relatively homogeneous structure with flexible long polymer chains and rare chemically cross-linked dense clusters. Moreover, the oxidized groups of GO nanosheets enable the formation of a hydrogen bond interaction with the amide groups of PNIPAM chains, which could physically cross-link the PNIPAM chains to increase the toughness of the hydrogel networks. The prepared PNIPAM-GO nanocomposite hydrogels with ultrahigh tensibility exhibit rapid, reversible, and repeatable NIR light-responsive properties, which are highly promising for fabricating remote light-controlled devices, smart actuators, artificial muscles, and so on.

Photoresponsive microvalve for remote actuation and flow control in microfluidic devices

Microvalves with different actuation methods offer great integrability and flexibility in operation of lab-on-chip devices. In this work, we demonstrate a hydrogel-based and optically controlled modular microvalve that can be easily integrated within a microfluidic device and actuated by an off-chip laser source. The microvalve is based on in-channel trapping of microgel particles, which are composed of poly(N-isopropylacrylamide) and polypyrrole nanoparticles. Upon irradiation by a near-infrared (NIR) laser, the microgel undergoes volumetric change and enables precisely localized fluid on/off switching. The response rate and the "open" duration of the microvalve can be simply controlled by adjusting the laser power and exposure time. We showed that the trapped microgel can be triggered to shrink sufficiently to open a channel within as low as ∼1-2 s; while the microgel swells to re-seal the channel within ∼6-8 s. This is so far one of the fastest optically controlled and hydrogel-based microvalves, thus permitting speedy fluidic switching applications. In this study, we successfully employed this technique to control fluidic interface between laminar flow streams within a Y-junction device. The optically triggered microvalve permits flexible and remote fluidic handling, and enables pulsatile in situ chemical treatment to cell culture in an automatic and programmed manner, which is exemplified by studies of chemotherapeutic drug induced cell apoptosis under different drug treatment strategies. We find that cisplatin induced apoptosis is significantly higher in cancer cells treated with a pulsed dose, as compared to continuous flow with a sustained dose. It is expected that our NIR-controlled valving strategy will provide a simple, versatile, and powerful alternative for liquid handling in microfluidic devices.

CoFe2O4@MnFe2O4/polypyrrole nanocomposites for in vitro photothermal/magnetothermal combined therapy

CoFe₂O₄@MnFe₂O₄/polypyrrole nanocomposites with a relatively large SLP and high photothermal efficiency are highly effective for in vitro cancer cell ablation by photothermal/magnetothermal combined therapy under mild conditions.

Photothermally triggered fast responding hydrogels incorporating a hydrophobic moiety for light-controlled microvalves

Iron oxide nanoparticles dispersed within a thermally responsive poly(N-isopropylacrylamide) (PNIPAm) hydrogel matrix effectively convert the photo energy of visible light of modest intensity into thermal energy, providing the efficient means to trigger changes in volumetric swelling of hydrogels. However, long irradiation time (on the order of minutes) and modest volume change limit their applications that need fast response and/or large volume change. In this work, we found that the degree of volume change triggered by light could be maximized by adjusting the lower critical solution temperature (LCST) of the hydrogels. On the basis of the evidence in this investigation, we can develop highly responsive hydrogels that show rapid and significant light-induced volume change, which could be achieved by incorporating a hydrophobic N,N-diethylacrylamide moiety in the PNIPAm network. This enhanced responsiveness led to the successful application of this material in a remote-controllable microvalve for microfluidic devices operated by light illumination within a few seconds.