Soft Supramolecular Nanoparticles by Noncovalent and Host-Guest Interactions

Cyclodextrin-Induced Suppression of PEG Crystallization from the Melt in a PEG-Peptide Conjugate

The influence of alpha-cyclodextrin (αCD) on PEG crystallization is examined for a peptide-PEG conjugate, YYKLVFF-PEG3k comprising an amyloid peptide YYKLVFF linked to PEG with molar mass 3 kg mol-1. Remarkably, differential scanning calorimetry (DSC) and simultaneous synchrotron small-angle/wide-angle X-ray scattering (SAXS/WAXS) show that crystallization of PEG is suppressed by αCD, provided that the cyclodextrin content is sufficient. A hexagonal mesophase is formed instead. The αCD threading reduces the conformational flexibility of PEG, and hence suppresses crystallization. These results show that addition of cyclodextrins can be used to tune the crystallization of peptide-polymer conjugates and potentially other polymer/biomolecular hybrids.

Design and fabrication of fluorous monoliths with tunable surface property for capillary liquid chromatography

Hierarchically porous monoliths with satisfactory properties have been employed in diverse fields, especially separation. In this study, pentafluorophenyl acrylate (PFPA), pentaerythritol tetraacrylate (PETA) and trimethylolpropane tris(3-mercaptopropionate) (TTMP) were selected as precursors to fabricate a novel monolithic column by thermally initiated polymerization in the presence of a binary porogenic system containing tetrahydrofuran and 1-propanol. The fabricated poly(PFPA-co-PETA-co-TTMP) monolithic column revealed excellent permeability and mechanical stability. Additionally, baseline separation of the mixture of small molecules can be achieved, involving alkylbenzene and fluorobenzene in chromatographic assessment, and the theoretical plate number is up to 60,500 plates/m for butylbenzene with a linear velocity of 0.14 mm/s. Tryptic digest of HeLa as an analyte was used to investigate the possibility of the poly(PFPA-co-PETA-co-TTMP) monolith in biological separation by cLC-MS/MS. Moreover, benefiting from the existence of pentafluorophenyl groups, the cucurbit[8]uril (CB[8]) could be modified on the prepared poly(PFPA-co-PETA-co-TTMP) monolith through host-guest interaction to obtain poly(PFPA-co-PETA-co-TTMP)-CB[8] monolith. It could be observed that significant changes in retention behavior of analytes appeared after immobilizing CB[8] on the monolith. It offered an innovative approach by utilizing host-guest interaction to fabricate monolithic columns with different chromatographic behaviors.

Antitoxin nanoparticles: design considerations, functional mechanisms, and applications in toxin neutralization

The application of nanotechnology has significantly advanced the development of novel platforms that enhance disease treatment and diagnosis. A key innovation in this field is the creation of antitoxin nanoparticles (ATNs), designed to address toxin exposure. These precision-engineered nanosystems have unique physicochemical properties and selective binding capabilities, allowing them to effectively capture and neutralize toxins from various biological, chemical, and environmental sources. In this review, we thoroughly examine their therapeutic and diagnostic potential for managing toxin-related challenges. We also explore recent advancements and offer critical insights into the design and clinical implementation of ATNs.

On the halide aggregation into the [Au4(PPh3)4]4+ cluster core. Insights from structural, optical and interaction energy analysis in [(Ph3PAu)4X2]2+ and [(Ph3PAu)4X]3+ species (X = Cl-, Br-, I-)

The aggregation of halide atoms into gold clusters offers an interesting scenario for the development of novel metal-based cavities for anion recognition and sensing applications. Thus, further understanding of the different contributing terms leading to efficient cluster-halide aggregation is relevant to guide their synthetic design. In this report, we evaluate the formation of [(Ph3PAu)4X2]2+ and [(Ph3PAu)4X]3+ species (X = Cl-, Br-, I-) in terms of different energy contributions underlying the stabilization of the cluster-halide interaction, and the expected UV-vis absorption profiles as a result of the variation in frontier orbital arrangements. Our results denote that a non-planar Au4 core shape enables enhanced halide aggregation, which is similar for Cl-, Br-, and I-, in comparison to the hypothetical planar Au4 counterparts. The electrostatic nature of the interaction involves a decreasing ion-dipole term along with the series, and for iodine species, higher-order electrostatic contributions become more relevant. Hence, the obtained results help in gaining further understanding of the different stabilizing and destabilizing contributions to suitable cluster-based cavities for the incorporation of different monoatomic anions.

Calculating Binding Free Energies in Model Host-Guest Systems with Unrestrained Advanced Sampling

Host-guest interactions are important to the design of pharmaceuticals and, more broadly, to soft materials as they can enable targeted, strong, and specific interactions between molecules. The binding process between the host and guest may be classified as a "rare event" when viewing the system at atomic scales, such as those explored in molecular dynamics simulations. To obtain equilibrium binding conformations and dissociation constants from these simulations, it is essential to resolve these rare events. Advanced sampling methods such as the adaptive biasing force (ABF) promote the occurrence of less probable configurations in a system, therefore facilitating the sampling of essential collective variables that characterize the host-guest interactions. Here, we present the application of ABF to a rod-cavitand coarse-grained model of host-guest systems to acquire the potential of mean force. We show that the employment of ABF enables the computation of the configurational and thermodynamic properties of bound and unbound states, including the free energy landscape. Moreover, we identify important dynamic bottlenecks that limit sampling and discuss how these may be addressed in more general systems.

Supramolecular Modular Assembly of Imaging-Trackable Enzymatic Nanomotors

Self-propelled micro/nanomotors (MNMs) have shown great application potential in biomedicine, sensing, environmental remediation, etc. In the past decade, various strategies or technologies have been used to prepare and functionalize MNMs. However, the current preparation strategies of the MNMs were mainly following the pre-designed methods based on specific tasks to introduce expected functional parts on the various micro/nanocarriers, which lacks a universal platform and common features, making it difficult to apply to different application scenarios. Here, we have developed a modular assembly strategy based on host-guest chemistry, which enables the on-demand construction of imaging-trackable nanomotors mounted with suitable driving and imaging modules using a universal assembly platform, according to different application scenarios. These assembled nanomotors exhibited enhanced diffusion behavior driven by enzymatic reactions. The loaded imaging functions were used to dynamically trace the swarm motion behavior of assembled nanomotors with corresponding fuel conditions both in vitro and in vivo. The modular assembly strategy endowed with host-guest interaction provides a universal approach to producing multifunctional MNMs in a facile and controllable manner, which paves the way for the future development of MNMs systems with programmable functions.

Switchover from singlet oxygen to superoxide radical through a photoinduced two-step sequential energy transfer process

The competitive nature of type II photosensitizers in the transfer of excitation energy for the generation of singlet oxygen (1O2) presents significant challenges in the design of type I photosensitizers to produce the superoxide anion radical (O2˙-). In this study, we present an efficient method for the direct transformation of type II photosensitizers into type I photosensitizers through the implementation of an artificial light-harvesting system (ALHSs) involving a two-step sequential energy transfer process. The designed supramolecular complex (DNPY-SBE-β-CD) not only has the ability to generate 1O2 as type II photosensitizers, but also demonstrates remarkable fluorescence properties in aqueous solution, which renders it an efficient energy donor for the development of type I photosensitizers ALHSs, thereby enabling the efficient generation of O2˙-. Meanwhile, to ascertain the capability and practicality of this method, two organic reactions were conducted, namely the photooxidation reaction of thioanisole and oxidative hydroxylation of arylboronic acids, both of which display a high level of efficiency and exhibit significant catalytic performance. This work provides an efficient method for turning type II photosensitizers into type I photosensitizers by a two-step sequential energy transfer procedure.

Search for Osme Bonds with π Systems as Electron Donors

The Osme bond is defined as pairing a Group 8 metal atom as an electron acceptor in a noncovalent interaction with a nucleophile. DFT calculations with the ωB97XD functional consider MO4 (M = Ru, Os) as the Lewis acid, paired with a series of π electron donors C2H2, C2H4, C6H6, C4H5N, C4H4O, and C4H4S. The calculations establish interaction energies in the range between 9.5 and 26.4 kJ/mol. Os engages in stronger interactions than does Ru, and those involving more extensive π-systems within the aromatic rings form stronger bonds than do the smaller ethylene and acetylene. Extensive analysis questions the existence of a true Osme bond, as the bonding chiefly involves interactions with the three O atoms of MO4 that lie closest to the π-system, via π(C-C)→σ*(M-O) transfers. These interactions are supplemented by back donation from M-O bonds to the π*(CC) antibonding orbitals of the π-systems. Dispersion makes a large contribution to these interactions, higher than electrostatics and much greater than induction.

A Multi-Component Nano-Co-Delivery System Utilizing Astragalus Polysaccharides as Carriers for Improving Biopharmaceutical Properties of Astragalus Flavonoids

Purpose

Enhancing the dissolution, permeation and absorption of active components with low solubility and poor permeability is crucial for maximizing therapeutic efficacy and optimizing functionality. The objective of this study is to investigate the potential of natural polysaccharides as carriers to improve the biopharmaceutical properties of active components.

Methods

In this study, we employed four representative flavonoids in Astragali Radix, namely Calycosin-7-O-β-D-glucoside (CAG), Ononin (ON), Calycosin (CA) and Formononetin (FMN), as a demonstration to evaluate the potential of Astragalus polysaccharides (APS) as carriers to improve the biopharmaceutical properties, sush as solubility, permeability, and absorption in vivo. In addition, the microstructure of the flavonoids-APS complexes was characterized, and the interaction mechanism between APS and flavonoids was investigated using multispectral technique and molecular dynamics simulation.

Results

The results showed that APS can self-assemble into aggregates with a porous structure and large surface area in aqueous solutions. These aggregates can be loaded with flavonoids through weak intermolecular interactions, such as hydrogen bonding, thereby improving their gastrointestinal stability, solubility, permeability and absorption in vivo.

Conclusion

We discovered the self-assembly properties of APS and its potential as carriers. Compared with introducing external excipients, the utilization of natural polysaccharides in plants as carriers may have a unique advantage in enhancing dissolution, permeation and absorption.

Tuning the Solution Self-Assembly of a Peptide-PEG (Polyethylene Glycol) Conjugate with α-Cyclodextrin

Cyclodextrins are saccharide ring molecules which act as host cavities that can encapsulate small guest molecules or thread polymer chains. We investigate the influence of alpha-cyclodextrin (αCD) on the aqueous solution self-assembly of a peptide-polymer conjugate YYKLVFF-PEG3K previously studied by our group [Castelletto et al., Polym. Chem., 2010, 1, 453-459]. This conjugate comprises a designed amyloid-forming peptide YYKLVFF that contains the KLVFF sequence from Amyloid β peptide, Aβ16-20, along with two aromatic tyrosine residues to enhance hydrophobicity, as well as polyethylene glycol PEG with molar mass 3 kg mol-1 . The conjugate self-assembles into β-sheet fibrils in aqueous solution. Here we show that complexation with αCD instead generates free-floating nanosheets in aqueous solution (with a β-sheet structure). The nanosheets comprise a bilayer with a hydrophobic peptide core and highly swollen PEG outer layers. The transition from fibrils to nanosheets is driven by an increase in the number of αCD molecules threaded on the PEG chains, as determined by 1 H NMR spectroscopy. These findings point to the use of cyclodextrin additives as a powerful means to tune the solution self-assembly in peptide-polymer conjugates and potentially other polymer/biomolecular hybrids.

Supramolecular nanomedicines based on host-guest interactions of cyclodextrins

In the biomedical and pharmaceutical fields, cyclodextrin (CD) is undoubtedly one of the most frequently used macrocyclic compounds as the host molecule because it has good biocompatibility and can increase the solubility, bioavailability, and stability of hydrophobic drug guests. In this review, we generalized the unique properties of CDs, CD-related supramolecular nanocarriers, supramolecular controlled release systems, and targeting systems based on CDs, and introduced the paradigms of these nanomedicines. In addition, we also discussed the prospects and challenges of CD-based supramolecular nanomedicines to facilitate the development and clinical translation of these nanomedicines.

Light-driven self-assembly of spiropyran-functionalized covalent organic framework

Controlling the number of molecular switches and their relative positioning within porous materials is critical to their functionality and properties. The proximity of many molecular switches to one another can hinder or completely suppress their response. Herein, a synthetic strategy involving mixed linkers is used to control the distribution of spiropyran-functionalized linkers in a covalent organic framework (COF). The COF contains a spiropyran in each pore which exhibits excellent reversible photoswitching behavior to its merocyanine form in the solid state in response to UV/Vis light. The spiro-COF possesses an urchin-shaped morphology and exhibits a morphological transition to 2D nanosheets and vesicles in solution upon UV light irradiation. The merocyanine-equipped COFs are extremely stable and possess a more ordered structure with enhanced photoluminescence. This approach to modulating structural isomerization in the solid state is used to develop inkless printing media, while the photomediated polarity change is used for water harvesting applications.

Hyaluronic Acid-Based Nanosystems for CD44 Mediated Anti-Inflammatory and Antinociceptive Activity

The nervous and immune systems go hand in hand in causing inflammation and pain. However, the two are not mutually exclusive. While some diseases cause inflammation, others are caused by it. Macrophages play an important role in modulating inflammation to trigger neuropathic pain. Hyaluronic acid (HA) is a naturally occurring glycosaminoglycan that has a well-known ability to bind with the cluster of differentiation 44 (CD44) receptor on classically activated M1 macrophages. Resolving inflammation by varying the molecular weight of HA is a debated concept. HA-based drug delivery nanosystems such as nanohydrogels and nanoemulsions, targeting macrophages can be used to relieve pain and inflammation by loading antinociceptive drugs and enhancing the effect of anti-inflammatory drugs. This review will discuss the ongoing research on HA-based drug delivery nanosystems regarding their antinociceptive and anti-inflammatory effects.

Cucurbit[7]uril-Based Supramolecular DNA Nanogel for Targeted Codelivery of Chemo/Photodynamic Drugs

Nanodrug delivery systems for the delivery of combination therapeutics have shown their exceptionally potential clinical application by facilitating better synergistic anticancer effects. Herein, we developed a universal strategy to fabricate supramolecular DNA nanogels from DNA tetrahedron skeleton and cucurbit[7]uril-based host-guest interaction for codelivery the chemo and photodynamic therapy drugs. The constructed supramolecular DNA nanogels showed the size tunability, host-guest competition and DNA enzyme responsibility. The cell uptake and MTT experiments demonstrated that the nanogel has excellent biocompatibility and specificity, and achieved the enrichment and slow release of drug in cells. Finally, the combined chemo/photodynamic therapy was realized by coloading doxorubicin hydrochloride and methylene blue. It was proven to be a better stragety to promote apoptosis of cancer cells compared to single chemotherapy or photodynamic therapy. These results suggest that our proposed supramolecular nanogels have provided an effective nanoplatform for drug delivery in the combinational therapy for cancer.

Chitosan-based high-strength supramolecular hydrogels for 3D bioprinting

The loss of tissues and organs is a major challenge for biomedicine, and the emerging 3D bioprinting technology has brought the dawn for the development of tissue engineering and regenerative medicine. Chitosan-based supramolecular hydrogels, as novel biomaterials, are considered as ideal materials for 3D bioprinting due to their unique dynamic reversibility and fantastic biological properties. Although chitosan-based supramolecular hydrogels have wonderful biological properties, the mechanical properties are still under early exploration. This paper aims to provide some inspirations for researchers to further explore. In this review, common 3D bioprinting techniques and the properties required for bioink for 3D bioprinting are firstly described. Then, several strategies to enhance the mechanical properties of chitosan hydrogels are introduced from the perspectives of both materials and supramolecular binding motifs. Finally, current challenges and future opportunities in this field are discussed. The combination of chitosan-based supramolecular hydrogels and 3D bioprinting will hold promise for developing novel biomedical implants.

Nature of hydride and halide encapsulation in Ag8 cages: insights from the structure and interaction energy of [Ag8(X){S2P(OiPr)2}6]+ (X = H-, F-, Cl-, Br-, I-) from relativistic DFT calculations

Unraveling the different contributing terms to an efficient anion encapsulation is a relevant issue for further understanding of the underlying factors governing the formation of endohedral species. Herein, we explore the favorable encapsulation of hydride and halide anions in the [Ag₈(X){S₂P(OPr)₂}₆]⁺ (X^- = H, 1, F, 2, Cl, 3, Br, 4, and, I, 5) series on the basis of relativistic DFT-D level of theory. The resulting Ag₈-X interaction is sizable, which decreases along the series: -232.2 (1) > -192.1 (2) > -165.5 (3) > -158.0 (4) > -144.2 kcal mol^-1 (5), denoting a more favorable inclusion of hydride and fluoride anions within the silver cage. Such interaction is mainly stabilized by the high contribution from electrostatic type interactions (80.9 av%), with a lesser contribution from charge-transfer (17.4 av%) and London type interactions (1.7 av%). Moreover, the ionic character of the electrostatic contributions decreases from 90.7% for hydride to 68.6% for the iodide counterpart, in line with the decrease in hardness according to the Pearson's acid-base concept (HSAB) owing to the major role of higher electrostatic interaction terms related to the softer (Lewis) bases. Lastly, the [Ag₈{S₂P(OPr)₂}₆]²⁺ cluster is able to adapt its geometry in order to maximize the interaction towards respective monoatomic anion, exhibiting structural flexibility. Such insights shed light on the physical reasoning necessary for a better understanding of the different stabilizing and destabilizing contributions related to metal-based cavities towards favorable incorporation of different monoatomic anions.

Natural polysaccharides based self-assembled nanoparticles for biomedical applications - A review

In recent years, nanoparticles (NPs) derived from the self-assembly of natural polysaccharides have shown great potential in the biomedical field. Here, we described several self-assembly modes of natural polysaccharides in detail, summarized the natural polysaccharides mostly used for self-assembly, and provided insights into the current applications and achievements of these self-assembled NPs. As one of the most widespread substances in nature, most natural polysaccharides exhibit advantages of biodegradability, low immunogenicity, low toxicity, and degradable properties. Therefore, they have been fully explored, and the application of chitosan, hyaluronic acid, alginate, starch, and their derivatives has been extensively studied, especially in the fields of biomedical. Polysaccharides based NPs were proved to improve the solubility of insoluble drugs, enhance tissue target ability and realize the controlled and sustained release of drugs. When modified by hydrophobic groups, the amphiphilic polysaccharides can self-assemble into NPs. Other driven forces of self-assembly include electrostatic interaction and hydrogen bonds. Up to the present, polysaccharides-based nanoparticles have been widely applied for tumor treatment, antibacterial application, gene therapy, photodynamic therapy and transporting insulin.

Tuning Supramolecular Polymers' Amphiphilicity via Host-Guest Interfacial Recognition for Stabilizing Multiple Pickering Emulsions

Supramolecular host-guest chemistry bridging the adjustable amphiphilicity and macromolecular self-assembly is well advanced in aqueous media. However, the interfacial self-assembled behaviors have not been further exploited. Herein, we designed a β-cyclodextrin-grafted alginate/azobenzene-functionalized dodecyl (Alg-β-CD/AzoC12) supra-amphiphilic system that possessed tunable amphiphilicity by host-guest interfacial self-assembly. Especially, supra-amphiphilic aggregates could be utilized as highly efficient soft colloidal emulsifiers for stabilizing water-in-oil-water (W/O/W) Pickering emulsions due to the excellent interfacial activity. Meanwhile, the assembled particle structures could be modulated by adjusting the oil-water ratio, resulting from the tunable aggregation behavior of supra-amphiphilic macromolecules. Additionally, the interfacial adsorption films could be partially destroyed/reconstructed upon ultraviolet/visible irradiation due to the stimuli-altering balance of amphiphilicity of Alg-β-CD/AzoC12 polymers, further constructing the stimulus-responsive Pickering emulsions. Therefore, the supramolecular interfacial self-assembly-mediated approach not only technologically advances the continued development of creative templates to construct multifunctional soft materials with anisotropic structures but also serves as a creative bridge between supramolecular host-guest chemistry, colloidal interface science, and soft material technology.

Self-Assembled Cationic Polypeptide Supramolecular Nanogels for Intracellular DNA Delivery

Supramolecular nanogels are an emerging class of polymer nanocarriers for intracellular delivery, due to their straightforward preparation, biocompatibility, and capability to spontaneously encapsulate biologically active components such as DNA. A completely biodegradable three-component cationic supramolecular nanogel was designed exploiting the multivalent host-guest interaction of cyclodextrin and adamantane attached to a polypeptide backbone. While cyclodextrin was conjugated to linear poly-L-lysine, adamantane was grafted to linear as well as star shaped poly-L-lysine. Size control of nanogels was obtained with the increase in the length of the host and guest polymer. Moreover, smaller nanogels were obtained using the star shaped polymers because of the compact nature of star polymers compared to linear polymers. Nanogels were loaded with anionic model cargoes, pyranine and carboxyfluorescein, and their enzyme responsive release was studied using protease trypsin. Confocal microscopy revealed successful transfection of mammalian HeLa cells and intracellular release of pyranine and plasmid DNA, as quantified using a luciferase assay, showing that supramolecular polypeptide nanogels have significant potential in gene therapy applications.

Interfacial self-assembled behavior of pH/light-responsive host-guest alginate-based supra-amphiphiles for controlling emulsifying property

Soft emulsifiers with relatively suitable structural controllability are necessarily required for the preparation of multifunctional Pickering emulsions. Herein, a β-cyclodextrin-grafted alginate/azobenzene-functionalized dodecyl (Alg-β-CD/AzoC. 12) polymeric supra-amphiphile was designed based on the host-guest interfacial self-assembly. As compared with Alg-β-CD amphiphilic polymers, the interfacial tension of Alg-β-CD/AzoC12 supra-amphiphilic assemblies reduced from 29.57 mN/m to 0.18 mN/m, indicating the great amphiphilicity derived from Alg-β-CD/AzoC12 supra-amphiphilic assemblies. With the increase of pH, the interfacial microstructures transformed from flocculated structures, spherical structures into deformed structures. Especially, the spherical microstructures with the highest interfacial viscoelasticity and thickness demonstrated the highest emulsifying efficiency due to the steric hindrance mechanism. Moreover, the interfacial elastic modulus of adsorbed layers exhibited ~4 times of that upon the ultraviolet illumination. These results disclosed that the interfacial microstructures could be readily regulated by the tunable amphiphilicity of Alg-β-CD/AzoC12 assemblies, which would be useful for the applications of Pickering emulsions in numerous fields.

Supramolecular Assembly with Near-Infrared Emission for Two-Photon Mitochondrial Targeted Imaging

Two-photon supramolecular assembly with near-infrared (NIR) fluorescence emission is constructed from tetraphenylethene derivative possessing methoxyl and vinyl pyridine salt (TPE-2SP), cucurbit[8]uril (CB[8]), and β-cyclodextrin modified hyaluronic acid (HA-CD). The obtained experimental results indicate that the TPE-2SP exhibits a very weak fluorescence emission at 650 nm, and then complexes with cucurbit[7]uril (CB[7]) to form 1:2 supramolecular pseudorotaxane with an enhanced NIR fluorescence emission at 660 nm. Compared with CB[7], CB[8] can assemble with TPE-2SP to be two-axial netlike pseudopolyrotaxane, resulting in close packing to increase TPE-2SP fluorescence emission with a redshift of 30 nm. Interestingly, TPE-2SP/CB[8] continues to assemble with cancer cell targeting agent HA-CD into nanoparticles, leading to assembling-induced further enhancement of NIR emission. Surprisingly, supramolecular nanoparticles have the two-photon character, and are successfully applied to mitochondrial targeting imaging. This supramolecular assembly system, with two-photon absorption and assembly-induced enhanced NIR luminescence properties, opens new way for biological targeted imaging.

Stability of Engineered Ferritin Nanovaccines Investigated by Combined Molecular Simulation and Experiments

Human ferritin is regarded as an attractive and promising vaccine platform because of its uniform structure, good plasticity, and desirable thermal and chemical stabilities. Besides, it is biocompatible and presumed safe when used as a vaccine carrier. However, there is a lack of knowledge of how different antigen insertion sites on the ferritin nanocage impact the resulting protein stability and performance. To address this question, we selected Epstein-Barr nuclear antigen 1 as a model epitope and fused it at the DNA level with different insertion sites, namely, the N- and C-termini of ferritin, to engineer proteins E1F1 and F1E1, respectively. Protein properties including hydrophobicity and thermal, pH, and chemical stability were investigated both by molecular dynamics (MD) simulation and by experiments. Both methods demonstrate that the insertion site plays an important role in protein properties. The C-terminus insertion (F1E1) leads to a less hydrophobic surface and more tolerance to the external influence of high temperature, pH, and high concentration of chemical denaturants compared to N-terminus insertion (E1F1). Simulated protein hydrophobicity and thermal stability by MD were in high accordance with experimental results. Thus, MD simulation can be used as a valuable tool to engineer nanovaccine candidates, cutting down costs by reducing the experimental effort and accelerating vaccine design.

Glutathione Self-Assembles into a Shell of Hydrogen-Bonded Intermolecular Aggregates on "Naked" Silver Nanoparticles

A detailed understanding of the molecular structure in nanoparticle ligand capping layers is crucial for their efficient incorporation into modern scientific and technological applications. Peptide ligands render the nanoparticles as biocompatible materials. Glutathione, a γ-ECG tripeptide, self-assembles into aggregates on the surface of ligand-free silver nanoparticles through intermolecular hydrogen bonding and forms a few nanometer-thick shells. Two-dimensional nonlinear infrared (2DIR) spectroscopy suggests that aggregates adopt a conformation resembling the β-sheet secondary structure. The shell thickness was evaluated with localized surface plasmon resonance spectroscopy and X-ray photoelectron spectroscopy. The amount of glutathione on the surface was obtained with spectrophotometry of a thiol-reactive probe. Our results suggest that the shell consists of ∼15 stacked molecular layers. These values correspond to the inter-sheet distances, which are significantly shorter than those in amyloid fibrils with relatively bulky side chains, but are comparable to glycine-rich silk fibrils, where the side chains are compact. The tight packing of the glutathione layers can be facilitated by hydrogen-bonded carboxylic acid dimers of glycine and the intermolecular salt bridges between the zwitterionic γ-glutamyl groups. The structure of the glutathione aggregates was studied by 2DIR spectroscopy of the amide-I vibrational modes using ¹³C isotope labeling of the cysteine carbonyl. Isotope dilution experiments revealed the coupling of modes forming vibrational excitons along the cysteine chain. The coupling along the γ-glutamyl exciton chain was estimated from these values. The obtained coupling strengths are slightly lower than those of native β-sheets, yet they appear large enough to point onto an ordered conformation of the peptides within the aggregate. Analysis of the excitons' anharmonicities and the strength of the transition dipole moments generally is in agreement with these observations.

Synthesis of fluorescent nanoprobe with simultaneous response to intracellular pH and Zn2+ for tumor cell distinguishment

A novel dual-functional nanoprobe was designed and synthesized by facile assembly of quinoline derivative (PEIQ) and meso-tetra (4-carboxyphenyl) porphine (TCPP) via electrostatic interaction for simultaneous sensing of fluorescence of Zn²⁺ and pH. Under the single-wavelength excitation at 400 nm, this nanoprobe not only exhibits "OFF-ON" green fluorescence at 512 nm by specific PEIQ-Zn²⁺ chelation, but also presents red fluorescence enhancement at 654 nm by H⁺-triggered TCPP release. The nanoprobe demonstrated excellent sensing performance with a good linear range (Zn²⁺, 1-40 μM; pH, 5.0-8.0), low detection limit (Zn²⁺, 0.88 μM), and simultaneous response towards Zn²⁺ and pH in pure aqueous solution within 2 min. More importantly, this dual-functional nanoprobe demonstrates the capability of discerning cancerous cells from normal cells, as evidenced by the fact that cancerous HepG2 cells in tumor microenvironment exhibit substantially higher red fluorescence and significantly lower green fluorescence than normal HL-7702 cells. The simultaneous, real-time fluorescence imaging of multiple analytes in a living system could be significant for cell analysis and tracking, cancer diagnosis, and even fluorescence-guided surgery of tumors.

Facile construction of noncovalent graft copolymers with triple stimuli-responsiveness for triggered drug delivery

A triple stimuli-responsive noncovalent graft copolymer was designed and synthesized by the host–guest interactions between β-CD grafted dextran and ferrocene-terminated poly(lactide).

Nanomaterials with Supramolecular Assembly Based on AIE Luminogens for Theranostic Applications

One of the major pursuits of biomedical science is to develop advanced strategies for theranostics, which is expected to be an effective approach for achieving the transition from conventional medicine to precision medicine. Supramolecular assembly can serve as a powerful tool in the development of nanotheranostics with accurate imaging of tumors and real-time monitoring of the therapeutic process upon the incorporation of aggregation-induced emission (AIE) ability. AIE luminogens (AIEgens) will not only enable fluorescence imaging but will also aid in improving the efficacy of therapies. Furthermore, the fluorescent signals and therapeutic performance of these nanomaterials can be manipulated precisely owing to the reversible and stimuli-responsive characteristics of the supramolecular systems. Inspired by rapid advances in this field, recent research conducted on nanotheranostics with the AIE effect based on supramolecular assembly is summarized. Here, three representative strategies for supramolecular nanomaterials are presented as follows: a) supramolecular self-assembly of AIEgens, b) the loading of AIEgens within nanocarriers with supramolecular assembly, and c) supramolecular macrocycle-guided assembly via host-guest interactions. Meanwhile, the diverse applications of such nanomaterials in diagnostics and therapeutics have also been discussed in detail. Finally, the challenges of this field are listed in this review.

Synthesis and biological evaluation as well as in silico studies of arylpiperazine-1,2-benzothiazine derivatives as novel anti-inflammatory agents

Novel arylpiperazine-1,2-benzothiazine derivatives have been designed and synthesized as potential anti-inflammatory agents. Their structure and properties have been studied using spectroscopic techniques (¹H NMR, ¹³C NMR, FT-IR), MS, elemental analyses, and single-crystal X-ray diffraction (SCXRD, for compound 7b). This study aimed to evaluate the inhibitory activity of new derivatives against both cyclooxygenase isoforms COX-1 and COX-2 due to the similarity of new compounds to oxicams drugs from the NSAIDs group. All new compounds were divided into two series - A and B - with a different linker between thiazine and piperazines nitrogens. Series A included the three-carbon aliphatic linker and series B - two-carbon with a carbonyl group. According to in vitro and molecular docking studies all new compounds exhibited cyclooxygenase inhibitory activity. The series of A compounds included COX-1 inhibitors only. In contrast, the B series showed inhibition of both COX-1 and COX-2, which suggested the importance of the acetoxy linker for COX-2 inhibition. Moreover, the most selective compound 7b, towards COX-2, was non-toxic for the normal human cell line (in concentration of 10 µM) comparable to reference drug meloxicam. Additionally, investigation of influence on model membranes confirmed the ability of the compound 7b to penetrate lipid bilayers which seemed to be important to the influence with membrane protein-cyclooxygenase.

Highly uniform self-assembled microspheres from single macromolecule self-recognition for enhanced cancer immunotherapy

Self-assembled highly uniform microspheres from star-shaped biocompatible polymers have been prepared as a local delivery system for co-loading different immunoagents together and ensuring their release in different stages, so as to realize effective cooperative immunotherapy and minimize systemic side effects.

Linear Alternating Supramolecular Photosensitizer for Enhanced Photodynamic Therapy

Supramolecular polymers with facile and versatile architectures via noncovalent connection present great potential in biological fields. Herein, a linear alternating supramolecular polymer is constructed via host-guest inclusion interaction between cyclodextrin dimer (CD₂) and bifunctional adamantane-conjugated porphyrin (TPP-Ad₂). The supramolecular alternating structure of CD/TPP could not only suppress the aggregation of PSs to improve the photophysical properties because of the steric hindrance but also enhance the water solubility of PSs induced from cyclodextrin moieties. The nanoplatform obtained by this linear alternating supramolecular polymer (TPP-Ad₂/CD₂) presents significantly enhanced photodynamic therapy (PDT) efficacy, providing a promising path for PDT.

Nanoscale Self-Assembly for Therapeutic Delivery

Self-assembly is the process of association of individual units of a material into highly arranged/ordered structures/patterns. It imparts unique properties to both inorganic and organic structures, so generated, via non-covalent interactions. Currently, self-assembled nanomaterials are finding a wide variety of applications in the area of nanotechnology, imaging techniques, biosensors, biomedical sciences, etc., due to its simplicity, spontaneity, scalability, versatility, and inexpensiveness. Self-assembly of amphiphiles into nanostructures (micelles, vesicles, and hydrogels) happens due to various physical interactions. Recent advancements in the area of drug delivery have opened up newer avenues to develop novel drug delivery systems (DDSs) and self-assembled nanostructures have shown their tremendous potential to be used as facile and efficient materials for this purpose. The main objective of the projected review is to provide readers a concise and straightforward knowledge of basic concepts of supramolecular self-assembly process and how these highly functionalized and efficient nanomaterials can be useful in biomedical applications. Approaches for the self-assembly have been discussed for the fabrication of nanostructures. Advantages and limitations of these systems along with the parameters that are to be taken into consideration while designing a therapeutic delivery vehicle have also been outlined. In this review, various macro- and small-molecule-based systems have been elaborated. Besides, a section on DNA nanostructures as intelligent materials for future applications is also included.

A supramolecular polymeric photoinitiator with enhanced dispersion in photo-curing systems

A simple and general approach to make the commercial photoinitiator water-soluble and polymeric was developed via supramolecular interactions, which is believed to find wide potential applications in the photo-curing technology.

Strain Rate-Dependent Viscoelasticity and Fracture Mechanics of Cellulose Nanofibril Composite Hydrogels

In this work, the composite hydrogel toughening behaviors as manifested by strain rate-dependent viscoelastic properties and enhanced fracture mechanics, that is, suppressed catastrophic crack propagation with increased resistance, are systematically examined by using cellulose nanofibrils (CNFs) as fillers in the polyacrylamide (PAAm) matrix. The uniaxial deformation tests show that the tearing energy increases with crack velocity and becomes dominated by the viscoelastic energy dissipation in front of the crack tip. The creep dynamics of the composite hydrogels under a constant stress is examined, and the results indicate that the incorporation of the CNF pronouncedly suppresses the creep deformation. In addition, the microdeformation and failure mechanisms are analyzed through the observation of morphology of arrested crack tips and the damage zone by transmission electron microscopy and scanning electron microscopy. By aligning the CNF along the crack direction, it is possible to focus on the study of interfacial slip mechanics and identify the role of interfacial slip during the energy dissipation process. The results indicate that the CNFs are largely orientated parallel to the loading direction to maximize the energy dissipation, where the initiation of crack propagation is the primary fracture mechanism in composite hydrogels. The coarse feature on the composite fracture surface implies that the CNF initiates deflection of crack propagation fronts and thus increases the strain energy for continuation of the fracture. It is envisioned that with the incorporation of interdisciplinary strategies, one can rationally combine multiple approaches toward the creation of nanocomposite hydrogels with enhanced mechanical properties.

Paclitaxel interaction with cucurbit [7]uril and acyclic Cucurbit[4]uril nanocontainers: A computational approach

Paclitaxel (PTX) is a natural terpenoid compound that has been broadly studied for its antitumor activities and widely used as a chemotherapy medication. The treatment efficacy of PTX is affected by its low aqueous solubility, thus causing a subject of extensive research. In recent years, synthetic molecular containers such as cucurbit[n]urils (CB[n]s) and their derivatives have been significantly developing because of their remarkable ability to bind hydrophobic and cationic drugs. Recent experimental studies have shown that acyclic CB[n]-type containers (aCB[n]s), as new derivatives of the family of CB[n]s, increase the solubility of insoluble pharmaceuticals. However, the nature by which the drug interacts with carriers remains largely unknown. In this study, molecular docking and molecular dynamics (MD) simulation were performed to understand how CB[7] and aCB[4] nanocontainers interact with PTX which affect its aqueous solubility. The results clarify how the flexibility of containers is influenced by their structure and how this affects their interactions with PTX. Our results reveal that although both CB[7] and aCB[4] are capable of binding to PTX, the affinity to aCB[4] is higher than that of CB[7]. It has also been shown that the binding to both CB[7] and aCB[4] is probably an entropy-driven process. This research supports the potential use of the cucurbit[n]urils and their acyclic derivatives as drug delivery systems.

On the magneto-structural role of the coordinating anion in oxamato-bridged copper(ii) derivatives

Herein we present the self-assembly of the [Cu(opba)]²⁻ and [Cu(dmphen)]²⁺ building blocks in the presence of thiocyanate (1), chloride (2), bromide (3) and dicyanamide (4) anions.

Cucurbit[8]uril-Based Polymers and Polymer Materials

Cucurbit[8]uril (CB[8]) is unique and notable in the cucurbit[n]uril family, since it has a relatively large cavity and thus is able to simultaneously accommodate two guest molecules. Typically, an electron-deficient first guest and an electron-rich second guest can be bound by CB[8] to form a stable 1:1:1 heteroternary supramolecular complex. Additionally, two homo guests can also be strongly dimerized inside the cavity of CB[8] to form a 2:1 homoternary supramolecular complex. During the past decade, by combining polymer science and CB[8] host-guest chemistry, a variety of systems have been established to construct supramolecular polymers with polymer chains typically at the nanoscale/sub-microscale, and CB[8]-based micro/nanostructured polymer materials in the form of polymer networks and hydrogels, microcapsules, micelles, vesicles, and colloidal particles, normally in solution and occasionally on surfaces. This Review summarizes the noncovalent interactions and strategies used for the preparation of CB[8]-based polymers and polymer materials with a focus on the representative and latest developments, followed by a brief discussion of their characterization, properties, and applications.

Self-Assembled Supramolecular Nanoparticles for Targeted Delivery and Combination Chemotherapy

It is challenging but imperative to merge imaging agents and small molecule therapeutics into one nanoentity for diagnosis and treatment. Herein, we constructed polymeric nanoparticles for targeted delivery and combination chemotherapy, which formed through host-guest interactions among three elements: 1) β-cyclodextrin polymer (poly-β-CD), as the backbone of nanoparticles; 2) two antitumor drugs-doxorubicin (DOX) and docetaxel (DTX); and 3) aptamers labeled with adamantane and fluorescein (Ad-aptamer-FAM), as recognition elements. First, polymeric nanoparticles, termed self-assembled supramolecular nanoparticles (SSNPs), were formulated by combining hydrophobic DTX and DOX with poly-β-CD via host-guest interactions. Then, the surface of SSNPs modified the aptamer to acquire targeting ability; such nanoparticles were termed targeted self-assembled supramolecular nanoparticles (T-SSNPs). As evidenced by MTS assay data, T-SSNPs exhibited significant selective cytotoxicity toward target cells. The results also indicated that combination drugs achieved a good synergistic effect with a combination index of 0.43. Thus, an effective and simple drug delivery system was constructed for targeted delivery and combination chemotherapy.

Magnesium Porphine Supermolecules and Two-Dimensional Nanoaggregates Formed Using the Langmuir-Schaefer Technique

Porphyrins are functional elements of important biomolecules, whose assemblies play a central role in fundamental processes such as electron transfer, oxygen transport, enzymatic catalysis, and light harvesting. Here we report an approach to formation of porphyrin supermolecules, a particular type of nanoparticles with unusually strong noncovalent intermolecular interactions. Key differences between the supermolecules and noncovalent nanostructures described earlier are as follows. (1) Supermolecules consist of molecules of the same type without side groups promoting the self-assembly and without any spacers; no surfactant or catalyst to assist the process is needed. (2) They exhibit unusual photophysical properties and remain stable even in organic solvents. Their formation occurs under specially selected conditions at the air-water interface at room temperature. Following this route, we have formed supermolecules of magnesium porphine, a functional element of chlorophyll. The properties of these supermolecules are markedly different from those of the constituent molecules. For example, in contrast to the pink color of the monomer solution, solutions of supermolecules are transparent for visible light and absorb in the ultraviolet and near-infrared regions. We also present atomic force microscopy visualization of the porphyrin two-dimensional nanoaggregates forming at the air-water interface that were predicted in our previous works. This approach offers a guideline for the discovery of new supermolecules, including complex biological ones, and the formation of supermolecular materials with novel properties.

Cooperativity Principles in Self-Assembled Nanomedicine

Nanomedicine is a discipline that applies nanoscience and nanotechnology principles to the prevention, diagnosis, and treatment of human diseases. Self-assembly of molecular components is becoming a common strategy in the design and syntheses of nanomaterials for biomedical applications. In both natural and synthetic self-assembled nanostructures, molecular cooperativity is emerging as an important hallmark. In many cases, interplay of many types of noncovalent interactions leads to dynamic nanosystems with emergent properties where the whole is bigger than the sum of the parts. In this review, we provide a comprehensive analysis of the cooperativity principles in multiple self-assembled nanostructures. We discuss the molecular origin and quantitative modeling of cooperative behaviors. In selected systems, we describe the examples on how to leverage molecular cooperativity to design nanomedicine with improved diagnostic precision and therapeutic efficacy in medicine.

Cyclodextrin-based biological stimuli-responsive carriers for smart and precision medicine

Spurred on by recent progress in nanotechnology and precision medicine, smart drug carriers are entering an entirely new era. Smart drug carriers have been widely studied in recent years as a result of their ability to control drug release under different microenvironments (such as pH, redox, and enzyme) in vivo. Host-guest interactions based on cyclodextrins have proven to be an efficient tool for fabricating smart drug carriers. Because of the application of host-guest interactions, many kinds of biological molecules or supramolecular building blocks can combine into an organic whole at the molecular level. In this review, the features, mechanisms of action, and potent applications of biological stimuli-responsive drug carriers based on cyclodextrins are discussed. In addition, some personal perspectives on this field are presented.