Colorimetric Detection of Hg2+ Based on the Growth of Aptamer-Coated AuNPs: The Effect of Prolonging Aptamer Strands

Recent progress in nanomaterial-based aptamers as biosensors for point of care detection of Hg2+ ions and its environmental applications

Among the foremost persistent heavy metal ions in the ecosystem, mercury (Hg2+) remains intimidating to the environment by producing a catastrophic effect on the environment as well as on mankind due to the exacerbation of anthropogenic activities. Therefore, it has become necessary to develop superlative techniques for its detection even at low concentrations. The conventional approaches for Hg2+ ions are quite laborious, and expensive, and require expertise in operating sophisticated instruments. To overcome these limitations, aptamer-based biosensors emerged as a promising tool for its detection. DNA-based aptamers have evolved as a significant technique by detecting them even in ppb levels. This review outlines the progress in aptamer-based biosensors from the year 2019-2023 by inducing changes in the electrochemical signal or by fluorescent/colorimetric approaches. The electrochemical sensors used nanomaterial electrodes for increasing the sensitivity whereas fluorescent and colorimetric sensors exhibit quenching or strong fluorescence in the presence of Hg2+ ions depending upon the prevailing mechanism or visible color changes. This perturbation in the signals could be attributed to the formation of the T-Hg2+ -T complex with the aptamers in the presence of ions revealing its real-time and biological applications in living or cancerous cells. Furthermore, next-generation biosensors are suggested to bring a paradigm shift to the integration of high-end smartphones, machine learning, artificial intelligence, etc.

Mercury (II) sensing using a simple turn-on fluorescent graphene oxide based aptasensor in serum and water samples

A simple, highly sensitive, and selective fluorometric aptasensing platform based on aptamer and graphene oxide (GO) is proposed for the determination of mercury (II) ion (Hg2+). In the designed assay, two aptamer probes, a carboxy-fluorescein (FAM) labeled aptamer (aptamer A) and its complementary (aptamer B) with partial complement containing several mismatches and GO as the quencher were used. In the absence of Hg2+, both A and B aptamers were adsorbed on the surface of GO by π-π-stacking, leading to fluorescence quenching of FAM due to fluorescence resonance energy transfer (FRET). Upon exposure to Hg2+, the A and B aptamer strands bind Hg2+ and form T-Hg2+-T complexes, leading to the formation of a stable double-stranded aptamer. The double-stranded aptamer is detached from the GO surface, resulting in the recovery of FAM fluorescence. The fluorescence intensity (FI) of the developed sensor was correlated with the Hg2+ concentration under optimized experimental conditions in two wide linear ranges, even in the presence of 10 divalent cations as interferences. The linear ranges were obtained from 200.0 to 900.0 fM and 5.0 to 33.0 pM, a limit of detection (LOD) of 106.0 fM, and a limit of quantification (LOQ) of 321.3 fM. The concentration of Hg2+ was determined in five real samples containing three water and two serum samples, using spiking and standard addition methods and the results were compared with the spiked amounts and atomic absorption (AAS) as standard method respectively, with acceptable recoveries. Furthermore, in the standard addition method, to overcome the effects of matrix influence of real samples in quantitative predictions, the excitation-emission matrix (EEM) data for samples was simultaneously analyzed by multivariate curve resolution with alternating least squares (MCR-ALS) as a second-order standard addition method (SOSAM).

Advances in colorimetric aptasensors for heavy metal ion detection utilizing nanomaterials: a comprehensive review

Heavy metal ion contamination poses significant environmental and health risks, necessitating rapid and efficient detection methods. In the last decade, colorimetric aptasensors have emerged as powerful tools for heavy metal ion detection, owing to their notable attributes such as high specificity, facile synthesis, adaptability to modifications, long-term stability, and heightened sensitivity. This comprehensive overview summarizes the key developments in this field over the past ten years. It discusses the principles, design strategies, and innovative techniques employed in colorimetric aptasensors using nanomaterials. Recent advancements in enhancing sensitivity, selectivity, and on-site applicability are highlighted. The review also presents application studies of successful heavy metal ion detection using colorimetric aptasensors, underlining their potential for environmental monitoring and health protection. Finally, future directions and challenges in the continued evolution of these aptasensors are outlined.

Highly dispersive PEI-modified CDs@ZIF-L dual-emitting fluorescent sensor for detecting metal ions

The leaf-like zeolitic imidazolate framework (ZIF-L) is a promising porous nanomaterial that has attracted increasing attention as an ideal host material to encapsulate functional fluorescent nanoparticles for designing fluorescent sensors. However, owing to the large particle size, gravity readily facilitates the precipitation of the ZIF-L from the aqueous solution, and thus lead to imperfect experimental results. Herein, we report a simple and rapid synthetic method which uses the polyethyleneimine (PEI)-modified ZIF-L as a host to solve the precipitation problem and construct a dual-emitting system that combines its fluorescence with carbon dots (CDs). Furthermore, CDs@ZIF-L/PEI with dual-emitting centres could be utilised as a ratio fluorescence sensor to detect Hg2+ ions. The sensor exhibited excellent dispersibility and good selectivity for sensing Hg2+ ions, with a limit of detection (LOD) of 14.5 nM. Furthermore, experimental results reveal that the CDs@ZIF-L/PEI fluorescent sensor could be effectively dispersed into agarose and less polar organic solvents such as DMF, MeOH, EtOH and CH3CN, expanding the application scope of the fluorescent sensor.

Current trends in the detection and removal of heavy metal ions using functional materials

The shortage of freshwater resources caused by heavy metal pollution is an acute global issue, which has a great impact on environmental protection and human health. Therefore, the exploitation of new strategies for designing and synthesizing green, efficient, and economical materials for the detection and removal of heavy metal ions is crucial. Among the various methods for the detection and removal of heavy ions, advanced functional systems including nanomaterials, polymers, porous materials, and biomaterials have attracted considerable attention over the past several years due to their capabilities of real-time detection, excellent removal efficiency, anti-interference, quick response, high selectivity, and low limit of detection. In this tutorial review, we review the general design principles underlying the aforementioned functional materials, and in particular highlight the fundamental mechanisms and specific examples of detecting and removing heavy metal ions. Additionally, the methods which enhance water purification quality using these functional materials have been reviewed, also current challenges and opportunities in this exciting field have been highlighted, including the fabrication, subsequent treatment, and potential future applications of such functional materials. We envision that this tutorial review will provide invaluable guidance for the design of functional materials tailored towards the detection and removal of heavy metals, thereby expediting the development of high-performance materials and fostering the development of more efficient approaches to water pollution remediation.

Chromogenic Mechanisms of Colorimetric Sensors Based on Gold Nanoparticles

The colorimetric signal readout method is widely used in visualized analyses for its advantages, including visualization of test results, simple and fast operations, low detection cost and fast response time. Gold nanoparticles (Au NPs), which not only exhibit enzyme-like activity but also have the advantages of tunable localized surface plasmon resonance (LSPR), high stability, good biocompatibility and easily modified properties, provide excellent platforms for the construction of colorimetric sensors. They are widely used in environmental monitoring, biomedicine, the food industry and other fields. This review focuses on the chromogenic mechanisms of colorimetric sensors based on Au NPs adopting two different sensing strategies and summarizes significant advances in Au NP-based colorimetric sensing with enzyme-like activity and tunable LSPR characteristics. In addition, the sensing strategies based on the LSPR properties of Au NPs are classified into four modulation methods: aggregation, surface modification, deposition and etching, and the current status of visual detection of various analytes is discussed. Finally, the review further discusses the limitations of current Au NP-based detection strategies and the promising prospects of Au NPs as colorimetric sensors, guiding the design of novel colorimetric sensors.

Aptamer-functionalized field-effect transistor biosensors for disease diagnosis and environmental monitoring

Nano-biosensors that are composed of recognition molecules and nanomaterials have been extensively utilized in disease diagnosis, health management, and environmental monitoring. As a type of nano-biosensors, molecular specificity field-effect transistor (FET) biosensors with signal amplification capability exhibit prominent advantages including fast response speed, ease of miniaturization, and integration, promising their high sensitivity for molecules detection and identification. With intrinsic characteristics of high stability and structural tunability, aptamer has become one of the most commonly applied biological recognition units in the FET sensing fields. This review summarizes the recent progress of FET biosensors based on aptamer functionalized nanomaterials in medical diagnosis and environmental monitoring. The structure, sensing principles, preparation methods, and functionalization strategies of aptamer modified FET biosensors were comprehensively summarized. The relationship between structure and sensing performance of FET biosensors was reviewed. Furthermore, the challenges and future perspectives of FET biosensors were also discussed, so as to provide support for the future development of efficient healthcare management and environmental monitoring devices.

Tracking the Growth of Chiral Plasmonic Nanocrystals at Molybdenum Disulfide Heterostructural Interfaces

The way of accurately regulating the growth of chiral plasmonics is of great importance for exploring the chirality information and improving its potential values. Herein, cysteine enantiomers modulate the anisotropic and epitaxial growth of gold nanoplasmonics on seeds of exfoliated MoS₂ nanosheets. The heterostructural Au and MoS₂ hybrids induced by enantiomeric cysteine are presented with chiroptical characteristics, dendritic morphologies, and plasmonic performances. Moreover, the synthesis, condition optimization, formation mechanism, and plasmonic properties of Au and MoS₂ dendritic nanostructures are studied. The chirality characteristics are identified using the circular dichroism spectra and scanning electron microscopy. Time-resolved transmission electron microscopy and UV-vis spectra of the intermediate products captured are analyzed to confirm the formation mechanism of dendritic plasmonic nanostructures at heterostructural surfaces. The specific dendritic morphologies originate from the synergistic impacts of heterostructural MoS₂ interfaces and enantiomeric cysteine-induced anisotropic manipulation. Significantly, the developed synthesis strategy of chiral nanostructures at heterostructural interfaces is highly promising in promoting the understanding of the plasmonic function and crucial chirality bioinformation.

DNA-functionalized gold nanoparticles: Modification, characterization, and biomedical applications

With the development of technologies based on gold nanoparticles (AuNPs), bare AuNPs cannot meet the increasing requirements of biomedical applications. Modifications with different functional ligands are usually needed. DNA is not only the main genetic material, but also a good biological material, which has excellent biocompatibility, facile design, and accurate identification. DNA is a perfect ligand candidate for AuNPs, which can make up for the shortcoming of bare AuNPs. DNA-modified AuNPs (DNA-AuNPs) have exciting features and bright prospects in many fields, which have been intensively investigated in the past decade. In this review, we summarize the various approaches for the immobilization of DNA strands on the surface of AuNPs. Representative studies for biomedical applications based on DNA-AuNPs are also discussed. Finally, we present the challenges and future directions.

Rapid and highly selective colorimetric detection of mercury(II) ions in water sources based on a ribavirin functionalized AuNP sensor

Solvated mercuric ions (Hg²⁺), a toxic and harmful water pollutant, can easily accumulate in organisms and cause serious damage to the kidney, liver, and central nervous system. To realize rapid and efficient detection of mercury (II) ions in water sources, a kind of new colorimetric sensor of gold nanoparticles (AuNPs) functionalized with ribavirin (Rib-AuNPs) was proposed and characterized by TEM, DLS, XRD, and UV-vis in this work. The color of the Rib-AuNP solution rapidly changed from wine-red to gray-blue with the addition of Hg²⁺ based on the aggregation mechanism. The limits of detection (LODs) are 0.20 μM by the naked eye and 3.64 nM by UV-vis spectroscopy with a fine linear relationship in the range of 0-0.25 μM (R² = 0.9834) and 0.25-0.80 μM (R² = 0.9893) of Hg²⁺, indicating that the detection system of Rib-AuNPs could be applied to analyze Hg²⁺ with excellent selectivity and anti-interference in real water samples.

Recent Advances in Adsorptive Nanocomposite Membranes for Heavy Metals Ion Removal from Contaminated Water: A Comprehensive Review

Water contamination is one of the most urgent concerns confronting the world today. Heavy metal poisoning of aquatic systems has piqued the interest of various researchers due to the high toxicity and carcinogenic consequences it has on living organisms. Due to their exceptional attributes such as strong reactivity, huge surface area, and outstanding mechanical properties, nanomaterials are being produced and employed in water treatment. In this review, recent advances in the use of nanomaterials in nanoadsorptive membrane systems for wastewater treatment and heavy metal removal are extensively discussed. These materials include carbon-based nanostructures, metal nanoparticles, metal oxide nanoparticles, nanocomposites, and layered double hydroxide-based compounds. Furthermore, the relevant properties of the nanostructures and the implications on their performance for water treatment and contamination removal are highlighted. The hydrophilicity, pore size, skin thickness, porosity, and surface roughness of these nanostructures can help the water permeability of the nanoadsorptive membrane. Other properties such as surface charge modification and mechanical strength can improve the metal adsorption effectiveness of nanoadsorptive membranes during wastewater treatment. Various nanocomposite membrane fabrication techniques are also reviewed. This study is important because it gives important information on the roles of nanomaterials and nanostructures in heavy metal removal and wastewater treatment.

Vanadium carbide MXene: as a reductant for the synthesis of gold nanoparticles and its biosensing application

Vanadium carbide MXene (V₂C) acts as a new type of two-dimensional (2D) graphene-like transition metal material that has attracted research interest. V₂C has been widely used in various fields due to its excellent physical and chemical properties. Herein, the self-assembled V₂C@gold nanoparticles (V₂C@AuNPs) are prepared by water bath process at 80 °C. With the addition of glutathione (GSH), the absorbance (Abs.) at 550 nm of V₂C@AuNPs was decreased. Therefore, an optical sensor is developed to detect GSH based on the properties of V₂C@AuNPs. Under the optimal conditions, the detection range is 1-32 µM and the detection limit is 0.099 µM. Furthermore, the proposed GSH sensor exhibits high sensitivity, high selectivity, strong stability, and excellent recovery. The work will expand the application of V₂C in biosensing.

Function of Graphene Oxide as the “Nanoquencher” for Hg2+ Detection Using an Exonuclease I-Assisted Biosensor

Graphene oxide is well known for its excellent fluorescence quenching ability. In this study, positively charged graphene oxide (pGO25000) was developed as a fluorescence quencher that is water-soluble and synthesized by grafting polyetherimide onto graphene oxide nanosheets by a carbodiimide reaction. Compared to graphene oxide, the fluorescence quenching ability of pGO25000 is significantly improved by the increase in the affinity between pGO25000 and the DNA strand, which is introduced by the additional electrostatic interaction. The FAM-labeled single-stranded DNA probe can be almost completely quenched at concentrations of pGO25000 as low as 0.1 μg/mL. A simple and novel FAM-labeled single-stranded DNA sensor was designed for Hg²⁺ detection to take advantage of exonuclease I-triggered single-stranded DNA hydrolysis, and pGO25000 acted as a fluorescence quencher. The FAM-labeled single-stranded DNA probe is present as a hairpin structure by the formation of T–Hg²⁺–T when Hg²⁺ is present, and no fluorescence is observed. It is digested by exonuclease I without Hg²⁺, and fluorescence is recovered. The fluorescence intensity of the proposed biosensor was positively correlated with the Hg²⁺ concentration in the range of 0–250 nM (R² = 0.9955), with a seasonable limit of detection (3σ) cal. 3.93 nM. It was successfully applied to real samples of pond water for Hg²⁺ detection, obtaining a recovery rate from 99.6% to 101.1%.

Lateral flow colorimetric biosensor for detection of Vibrio parahaemolyticus based on hybridization chain reaction and aptamer

Vibrio parahaemolyticus (V. parahaemolyticus) is the causative agent for acute hepatopancreatic necrosis disease (AHPND) of shrimp, and it is also a common seafood-borne pathogen for humans. Rapid and accurate identification of V. parahaemolyticus is helpful to diagnose the AHPND and ensure food safety. Common detection methods suffer the deficiency of time-consuming and complexed operation. Based on the increased development of aptamer and our previous study, a new detection assay of V. parahaemolyticus was introduced, in which the aptamer combined with magnetic nanoparticles (MNPs) was the recognizer, hybridization chain reaction (HCR) was the signal amplifier, and lateral flow nucleotide biosensor (LFNB) was the signal exporter. The assay possessed high specificity of distinguishing the target with other bacteria, and the calculated limit of detection was 2.6 × 10³ cells. Furthermore, the whole process just needs 67 min, free of thermocycle instruments and signal readout instruments, which means it is suitable for low-resource laboratories or districts.

Highly Sensitive Detection for Mercury Ions Using Graphene Oxide (GO) Sensors

The mercury ion (Hg²⁺) is one of the heavy metal ions, and its presence in trace amounts can cause physiological damage to an organism. Traditional methods of Hg²⁺ detection have been useful but have also had numerous limitations and challenges, and as a result, it is important to design new and sophisticated methods that can aid in the detection of Hg²⁺. In this paper, two fluorescent dyes, carboxyfluorescein (FAM) and SYBR Green I, were used to label and intercalate DNA probes immobilized on the surface of graphene oxide (GO) for sensors to detect Hg²⁺. FAM and SYBR Green I dye share close excitation and emission wavelength spectra, which can promote and amplify the detection of signals, and also increase the limit of detection (LOD). The results showed that the limit of detection in this method was 0.53 nM. Moreover, when the sensors with double amino groups on the surface of GO were carried out to detect Hg²⁺, a limit of detection was improved to 0.43 nM. The sensors were then applied in the real sample. The results show that this method has a promising potential in Hg²⁺ detection.

Reusable, facile, and rapid aptasensor capable of online determination of trace mercury

Herein, we reported a homemade waveguide-based evanescent wave aptasensor for the facile online monitoring of mercury pollution. The aptasensor exploited the high selectivity of hairpin structure-based thymidine-Hg²⁺-thymidine coordination chemistry (T-T mismatch) for Hg²⁺ recognition and the stably regenerable capability of DNA-functionalized waveguide surfaces. The presence of Hg²⁺ caused the T-T mismatch of Cy5.5-labeled T-rich single-stranded DNA sequences. The formed hairpin structures blocked the further hybridization of T-rich single-stranded DNA sequences with the complementary DNA strands that are modified on the waveguide surface; this phenomenon was accompanied by the decrease in the fluorescent signals excited by the evanescent wave. The limit of detection in real water samples was determined to be 0.2 μg/L, which was comparable with that of 0.4 μg/L in an ultrapure water under controlled conditions. And the linear range was observed from 1.4 µg/L to 240.7 µg/L. The negligible environmental matrix effect on the performance ensured the reliability of the proposed aptasensor. Moreover, the cross reactivity of this method toward other investigated metal ions was negligible. Through the delicate surface modification with DNA molecules covalently, the chip was reused at least 31 times with a relative standard deviation (RSD) of less than 19%. A Hg²⁺ pollution accident was successfully detected within 30 min, shedding new light in pollution monitoring, environment restoration, and emergency treatment.

Dual-target electrochemical aptasensor based on co-reduced molybdenum disulfide and Au NPs (rMoS2-Au) for multiplex detection of mycotoxins

Multiple mycotoxin contamination has posed health risks in the area of food safety. In this study, co-reduced molybdenum disulfide and gold nanoparticles (rMoS₂-Au) were designed and used for the first time as an efficient platform endowing electrochemical electrodes with superior electron transfer rates, large surface areas and strong abilities to firmly couple with large amounts of different aptamers. After further modification with thionine (Thi) and 6-(Ferrocenyl) hexanethiol (FC6S), a platform enabling sensitive, selective and simultaneous determination of two important mycotoxins, zearalenone (ZEN) and fumonisin B1 (FB1), was achieved. The established aptasensor showed excellent linear relationships (R² > 0.99) when ZEN and FB1 concentrations were in the range of 1 × 10^-3-10 ng mL^-1 and 1 × 10^-3-1 × 10² ng mL^-1, respectively. High sensitivity of ZEN and FB1 with a limit of detection as low as 5 × 10^-4 ng mL^-1 was obtained with excellent selectivity and stability. The effectiveness of the aptasensor was verified in real maize samples, and satisfactory recoveries were attained. The established platform could be easily expanded to other aptamer-based multiplex screening protocols in biochemical research and clinical diagnosis.

Recent advances in the development of electrochemical aptasensors for detection of heavy metals in food

Heavy metal contamination in environment and food has attracted intensive attention from the public since it poses serious threats to ecological system and human health. Traditional detection methods for heavy metals such as atomic absorption spectrometry have a fairly low detection limit, but the methods have many limitations and disadvantages. Therefore, it is of significance to develop a rapid technology for real-time and online detection of heavy metals. The electrochemical aptasensor-based technology is promising in the detection of heavy metals with advantages of high sensitivity, specificity, and accuracy. Although its development is rapid, more researches should be carried out before this technology can be used for on-site detection. In this review, the origin, basic principles and development of electrochemical aptasensors are introduced. The applications of nanomaterials and electrochemical aptasensors for the detection of heavy metals (mainly mercury, lead, cadmium, and arsenic) are summarized. The research and application tendency of electrochemical aptasensors for detection of heavy metals are prospected.

DNA-Functionalized Plasmonic Nanomaterials for Optical Biosensing

Plasmonic nanomaterials, especially Au and Ag nanomaterials, have shown attractive physicochemical properties, such as easy functionalization and tunable optical bands. The development of this active subfield paves the way to the fascinating biosensing platforms. In recent years, plasmonic nanomaterials-based sensors have been extensively investigated because they are useful for genetic diseases, biological processes, devices, and cell imaging. In this account, a brief introduction of the development of optical biosensors based on DNA-functionalized plasmonic nanomaterials is presented. Then the common strategies for the application of the optical sensors are summarized, including colorimetry, fluorescence, localized surface plasmon resonance, and surface-enhanced resonance scattering detection. The focus is on the fundamental aspect of detection methods, and then a few examples of each method are highlighted. Finally, the opportunities and challenges for the plasmonic nanomaterials-based biosensing are discussed with the development of modern technologies.

Plasmonic ELISA based on DNA-directed gold nanoparticle growth for Cronobacter detection in powdered infant formula samples

The traditional gold nanoparticle (AuNP) growth-based plasmonic ELISA (pELISA) strictly and directly controlled by reducing reagents can achieve high sensitivity, but it remains fragile toward the surrounding environment. This work developed a sandwich pELISA for Cronobacter detection in powdered infant formula samples by mediating AuNP growth through DNA. In this assay, DNA adsorbed on the surface of gold nanoseeds guided the anisotropic crystal growth with hydroxylamine as a reducing reagent, and the catalase-hydrogen peroxide (Cat-H₂O₂) system was introduced to bridge the DNA-directed AuNP growth and pELISA, as such DNA can be cleaved into fragments by the hydroxyl radical generated from oxidation of H₂O₂ through Fenton reagents. Under optimized conditions, the proposed pELISA can qualitatively detect Cronobacter species (Cronobacter muytjensii ATCC 51329) by the naked eye with a cut-off limit of 3 × 10⁵ cfu/mL. This method also revealed a good linear range (3 × 10² to 3 × 10⁷ cfu/mL) for quantitative detection of C. muytjensii ATCC 51329 with a limit of detection of 1.6 × 10² cfu/mL, which is approximately 162.5 times lower than that of horseradish peroxidase-based conventional ELISA (2.6 × 10⁴ cfu/mL). By taking advantage of highly stable DNA-directed AuNP growth, the proposed method shows a good performance in powdered infant formula samples spiked with different concentrations of C. muytjensii ATCC 51329 with average recoveries ranging from 90.79 to 119.09% and coefficient of variation ranging from 4.24 to 9.55%. These values corresponded to an acceptable accuracy and precision for the proposed method. In brief, this work shows potential for screening other analytes in food safety, clinical diagnostics, and environmental monitoring.

Multicolor and Ultrasensitive Enzyme-Linked Immunosorbent Assay Based on the Fluorescence Hybrid Chain Reaction for Simultaneous Detection of Pathogens

Various pathogens may coexist in one sample; however, detection methods that rely on traditional selective culture media or immune agents designed specifically for a certain target are unsuitable for multiple targets. It is important to develop a simultaneous and sensitive detection method for multiple pathogens. Here, a multicolor and ultrasensitive enzyme-linked immunosorbent assay (ELISA) platform based on the fluorescence hybridization chain reaction (HCR) was developed. In the assay, multicolor fluorescence concatemers formed as signal amplifiers and signal reporters in the presence of target pathogens. When HCR occurred, Escherichia coli O157:H7, Salmonella serotype Choleraesuis, and Listeria monocytogenes were detected simultaneously with three different fluorescences. Additionally, the limits of detection for E. coli O157:H7, Salmonella Choleraesuis, and L. monocytogenes were 3.4 × 10¹, 6.4 × 10⁰, and 7.0 × 10¹ CFU/mL, respectively. The assay achieved ultrasensitive, specific, and simultaneous detection of three pathogens and can be applied to the detection of pathogens in milk samples. Therefore, this multicolor and ultrasensitive ELISA platform has great potential in the application of simultaneous detection of pathogens.

Poly(adenine)-mediated DNA-functionalized gold nanoparticles for sensitive detection of mercury ions in aqueous media

In this work, a facile and sensitive colorimetric sensor for Hg2+ ions based on poly (adenine)-mediated DNA-functionalized gold nanoparticles (Au NPs) is reported. One DNA sequence consisting of poly-A and T-rich DNA was designed rationally. Poly-A was used as an anchoring block to bind tightly to Au NPs, and T-rich DNA was utilized for specific recognition of Hg2+ ions. With the assistance of poly-A, T-rich DNA was easily introduced onto the surface of Au NPs and kept an upright orientation. In the presence of Hg2+ ions, T base binding with Hg2+ ions results in the formation of "T-Hg2+-T" among the Au NPs, which caused aggregation of the Au NPs and a subsequent change in the color of the solution, from wine red to grayish blue. On this occasion, the limit of detection (LOD) was 3.75 nM Hg2+ ions with a linear range from 5 nM to 200 nM, as measured by UV-Vis spectroscopy. Moreover, successful application of this method for the detection of Hg2+ ions in real samples was demonstrated.

Dual-entropy-driven catalytic amplification reaction for ultra-sensitive and visible detection of Hg2+ in water based on thymine–Hg2+–thymine coordination chemistry

An ultra-sensitive and visible Hg²⁺ detection strategy was established.

The detection of mercury ion using DNA as sensors based on fluorescence resonance energy transfer

Mercury ion (Hg²⁺) is a heavy metal that can cause serious water pollution. With the accumulation of large quantities in lakes, rivers, freshwater and aquatic life, Hg²⁺ can pass through the food chain, entering the human body and endangering health. Hg²⁺ detection has therefore become important thereby attracting extensive interests. Currently, several DNA-based sensors have been used for Hg²⁺ detection because they are not easy to degrade and are very stable. This paper summarizes the application of some DNA-based sensors based on fluorescence resonance energy transfer (FRET), analyzes their characteristic, and compares their sensitivity. Future perspectives and possible challenges in this area are also outlined.

Functionalized Silver Nano-Sensor for Colorimetric Detection of Hg2+ Ions: Facile Synthesis and Docking Studies

In the present study, we describe the facile synthesis of silver nanoparticles (AgNPs) and their nanostructures functionalized with 2-aminopyrimidine-4,6-diol (APD-AgNPs) for Hg²⁺ ion detection. The promising colorimetric response of APD-AgNPs to detect Hg²⁺ ions was visible with naked eyes and spectroscopic changes were examined by using a UV-Visible spectrophotometer. The aggregation of APD-AgNPs upon addition of Hg²⁺ ions was due to the chelation effect of the functionalized nanostructures and results in a color change from pale brown to deep yellow color. The probing sensitivity was observed within five minutes with a detection limit of about 0.35 µM/L. The TEM images of APD-AgNPs showed polydispersed morphologies with hexagonal, heptagonal and spherical nanostructures with an average size between 10 to 40 nm. Furthermore, the sensing behavior of APD-AgNPs towards Hg²⁺ ions detection was investigated using docking and interaction studies.

Anti-Agglomeration Behavior and Sensing Assay of Chlorsulfuron Based on Acetamiprid-Gold Nanoparticles

Monitoring of low levels of chlorsulfuron in environmental water samples is important. Although several detection methods have been developed, they all have some drawbacks, such as being time-consuming, requiring expensive instruments and experienced operators, and consuming large volumes of organic solvents. There is an urgent need for a simple, rapid, and inexpensive detection method for chlorsulfuron. Herein, such a method was developed using anti-aggregation of gold nanoparticles (AuNPs) in the presence of acetamiprid in agricultural irrigation water samples. Aggregation of the AuNPs was induced by acetamiprid, and this produced a distinct color change from Bordeaux red to blue. However, the strong hydrogen bonding interaction between chlorsulfuron and acetamiprid could inhibit AuNP aggregation. The effect of chlorsulfuron on the anti-agglomeration behavior of AuNPs was monitored by ultraviolet–visiblespectroscopy (UV-Vis) and the naked eye over a concentration range 0.1–100 mg/L. The detection limit for chlorsulfuron was 0.025 mg/L (signal-to-noise ratio of three). This colorimetric method was successfully applied to the determination of chlorsulfuron in spiked tap water and agricultural irrigation water with satisfactory recoveries (76.3%–94.2%).

Equipment-Free Quantitative Aptamer-Based Colorimetric Assay Based on Target-Mediated Viscosity Change

In this paper, we describe an aptamer-based colorimetric assay (ABCA), which integrates enzyme-loaded microparticles for signal amplification with distance measurement for equipment-free quantitative readout. The distance measurement readout is on the basis of target-induced selective reduction in viscosity of reaction solution. Its utility is well demonstrated with inexpensive, sensitive, and selective detection of adenosine (model analyte) in buffer samples and real samples of human serum and urine with the naked eye. This ABCA method just requires operators to simply count the number of colored distance-relevant marked bars on the calibrated glass microsyringes (testing containers) to provide quantitative results. It thus holds great promise for wide applications particularly in limited-resource settings.

Tetrahedral DNA probe coupling with hybridization chain reaction for competitive thrombin aptasensor

A novel competitive aptasensor for thrombin detection is developed by using a tetrahedral DNA (T-DNA) probe and hybridization chain reaction (HCR) signal amplification. Sulfur and nitrogen co-doped reduced graphene oxide (SN-rGO) is firstly prepared by a simple reflux method and used for supporting substrate of biosensor. Then, T-DNA probe is modified on the electrode by Au-S bond and a competition is happened between target thrombin and the complementary DNA (cDNA) of aptamer. The aptamer binding to thrombin forms an aptamer-target conjugate and make the cDNA remained, and subsequently hybridizes with the vertical domain of T-DNA. Finally, the cDNAs trigger HCR, which results in a great current response by the catalysis of horseradish peroxidase to the hydrogen peroxide + hydroquinone system. For thrombin detection, the proposed biosensor shows a wide linearity range of 10^-13-10^-8M and a low detection limit of 11.6fM (S/N = 3), which is hopeful to apply in biotechnology and clinical diagnosis.