Enhanced Photoelectrochemical Performance in Reduced Graphene Oxide/BiFeO3 Heterostructures

Text Mining the Literature to Inform Experiments and Rationalize Impurity Phase Formation for BiFeO3

We used data-driven methods to understand the formation of impurity phases in BiFeO3 thin-film synthesis through the sol-gel technique. Using a high-quality dataset of 331 synthesis procedures and outcomes extracted manually from 177 scientific articles, we trained decision tree models that reinforce important experimental heuristics for the avoidance of phase impurities but ultimately show limited predictive capability. We find that several important synthesis features, identified by our model, are often not reported in the literature. To test our ability to correctly impute missing synthesis parameters, we attempted to reproduce nine syntheses from the literature with varying degrees of "missingness". We demonstrate how a text-mined dataset can be made useful by informing new controlled experiments and forming a better understanding for impurity phase formation in this complex oxide system.

Polarization Alignment in Polycrystalline BiFeO3 Photoelectrodes for Tunable Band Bending

Polarization in a semiconductor can modulate the band bending via the depolarization electric field (EdP), subsequently tuning the charge separation and transfer (CST) process in photoelectrodes. However, the random orientation of dipole moments in many polycrystalline semiconductor photoelectrodes leads to negligible polarization effect. How to effectively align the dipole moments in polycrystalline photoelectrodes into the same direction to maximize the polarization is still to be developed. Herein, we report that the dipole moments in a ferroelectric BiFeO3 photoelectrode can be controlled under external poling, resulting in a tunable CST efficiency. A negative bias of -40 voltage (V) poling to the photoelectrode leads to an over 110% increase of the CST efficiency, while poling at +40 V, the CST efficiency is reduced to only 41% of the original value. Furthermore, a nearly linear relationship between the external poling voltage and surface potential is discovered. The findings here provide an effective method in tuning the band bending and charge transfer of the emerging ferroelectricity driven solar energy conversion.

BiFeO3-Black TiO2 Composite as a Visible Light Active Photocatalyst for the Degradation of Methylene Blue

The application of a novel BiFeO₃ (BFO)-black TiO₂ (BTO) composite (called BFOT) as a photocatalyst for the degradation of methylene blue is reported. The p-n heterojunction photocatalyst was synthesized for the first time through microwave-assisted co-precipitation synthesis to change the molar ratio of BTO in BiFeO₃ to increase the photocatalytic efficiency of the BiFeO₃ photocatalyst. The UV-visible properties of p-n heterostructures showed excellent absorption of visible light and reduced electron-hole recombination properties compared to the pure-phase BFO. Photocatalytic studies on BFOT10, BFOT20, and BFOT30 have shown that they decompose methylene blue (MB) in sunlight better than pure-phase BFO in 70 min. The BFOT30 photocatalyst was the most effective at reducing MB when exposed to visible light (97%). Magnetic studies have shown that BTO is diamagnetic, and the BFOT10 photocatalyst exhibits a very weak antiferromagnetic behavior, whereas BFOT20 and BFO30 show diamagnetic behavior. This study confirms that the catalyst has poor stability and weak magnetic recovery properties due to the non-magnetic phase BTO in the BFO.

Achieving Record-High Photoelectrochemical Photoresponse Characteristics by Employing Co3O4 Nanoclusters as Hole Charging Layer for Underwater Optical Communication

The physicochemical properties of a semiconductor surface, especially in low-dimensional nanostructures, determine the electrical and optical behavior of the devices. Thereby, the precise control of surface properties is a prerequisite for not only preserving the intrinsic material quality but also manipulating carrier transport behavior for promoting device characteristics. Here, we report a facile approach to suppress the photocorrosion effect while boosting the photoresponse performance of n-GaN nanowires in a constructed photoelectrochemical-type photodetector by employing Co₃O₄ nanoclusters as a hole charging layer. Essentially, the Co₃O₄ nanoclusters not only alleviate nanowires from corrosion by optimizing the oxygen evolution reaction kinetics at the nanowire/electrolyte interface but also facilitate an efficient photogenerated carrier separation, migration, and collection process, leading to a significant ease of photocurrent attenuation (improved by nearly 867% after Co₃O₄ decoration). Strikingly, a record-high responsivity of 217.2 mA W^-1 with an ultrafast response/recovery time of 0.03/0.02 ms can also be achieved, demonstrating one of the best performances among the reported photoelectrochemical-type photodetectors, that ultimately allowed us to build an underwater optical communication system based on the proposed nanowire array for practical applications. This work provides a perspective for the rational design of stable nanostructures for various applications in photo- and biosensing or energy-harvesting nanosystems.

BiFeO3/Fe2O3 electrode for photoelectrochemical water oxidation and photocatalytic dye degradation: A single step synthetic approach

Herein, mixed-phase BiFeO₃/Fe₂O₃ (BF-M) nanocomposite has been successfully prepared in a simple single-step synthetic strategy and its structural, physicochemical and magnetic properties have been characterized. The performance of as-synthesized mixed-phase BF-M catalyst has been investigated in photoelectrochemical (PEC) water oxidation and photocatalytic dye degradation analysis by comparing with the partials Fe₂O₃ with BiFeO₃ (BF-P). The BF-M photocatalyst has degraded 95.7% of the rhodamine B (RhB) dye while BF-P has degraded 82.1% in 80 min. In addition, the BF-M electrode exhibited 0.57 mA cm^-2 photocurrent density which was 1.83 times higher than the BF-P electrode (0.31 mA cm^-2), signifying that the formation of a mixed-phase nanostructure interface is advantageous in enhancing light absorption capacity and reducing the rate of electron-hole recombination.

Interfacial engineering in 3D/2D and 1D/2D bismuth ferrite (BiFeO3)/Graphene oxide nanocomposites for the enhanced photocatalytic activities under sunlight

3D-particulate and 1D-fiber structures of multiferroic bismuth ferrite (BiFeO₃/BFO) and their composites with 2D-graphene oxide (GO) have been developed to exploit the different scheme of interfacial engineering as 3D/2D and 1D/2D systems. Particulates and fibers of BFO were developed via sol-gel and electrospinning fabrication approaches respectively and their integration with GO was performed via the ultrasonic-assisted chemical reduction process. The crystalline and phase formation of BiFeO₃ and GO was confirmed from the XRD patterns obtained. The electron microscopic images revealed the characteristic integration of 3D particulates (with average size of 100 nm) and 1D fibers (with diameter of ~150 nm and few μm length) onto the 2D GO layers (thickness of ~27 nm). XPS analysis revealed that the BFO nanostructures have been integrated onto the GO through chemisorptions process, where it indicated that the ultrasonic process engineers the interface through the chemical modification of the surface of these 3D/2D and 1D/2D nanostructures. The photophysical studies such as the impedance and photocurrent measurements showed that the charge separation and recombination resistance is significantly enhanced in the system, which can directly be attributed to the effective interfacial engineering in the developed hetero-morphological composites. The degradation studies against a model pollutant Rhodamine B revealed that the developed nanocomposites exhibit superior photocatalytic activity via the effective generation of OH radicals as confirmed by the radical analysis studies (100% degradation in 150 and 90 min for 15% GO/BFO particulate and fiber composites, respectively). The developed system also demonstrated excellent photocatalytic recyclability, indicated their enhanced stability.

Complex Catalytic Materials Based on the Perovskite-Type Structure for Energy and Environmental Applications

This review paper focuses on perovskite-type materials as (photo)catalysts for energy and environmental applications. After a short introduction and the description of the structure of inorganic and hybrid organic-inorganic perovskites, the methods of preparation of inorganic perovskites both as powders via chemical routes and as thin films via laser-based techniques are tackled with, for the first, an analysis of the influence of the preparation method on the specific surface area of the material obtained. Then, the (photo)catalytic applications of the perovskites in energy production either in the form of hydrogen via water photodecomposition or by methane combustion, and in the removal of organic pollutants from waste waters, are reviewed.

Regulation of Ferroelectric Polarization to Achieve Efficient Charge Separation and Transfer in Particulate RuO2 /BiFeO3 for High Photocatalytic Water Oxidation Activity

Exploiting spontaneous polarization of ferroelectric materials to achieve high charge separation efficiency is an intriguing but challenging research topic in solar energy conversion. This work shows that loading high work function RuO₂ cocatalyst on BiFeO₃ (BFO) nanoparticles enhances the intrinsic ferroelectric polarization by efficient screening of charges to RuO₂ via RuO₂ /BFO heterojunction. This leads to enhancement of the surface photovoltage of RuO₂ /BFO single nanoparticles nearly 3 times, the driving force for charge separation and transfer in photocatalytic reactions. Consequently, efficient photocatalytic water oxidation is achieved with quantum efficiency as high as 5.36 % at 560 nm, the highest activity reported so far for ferroelectric materials. This work demonstrates that, unlike low photocurrent density in film-based ferroelectric devices, high photocatalytic activity could be achieved by regulating the ferroelectric spontaneous polarization using appropriate cocatalyst to enhance driving force for efficient separation and transfer of photogenerated charges in particulate ferroelectric semiconductor materials.

Progress in BiFeO3-based heterostructures: materials, properties and applications

BiFeO3-based heterostructures have attracted much attention for potential applications due to their room-temperature multiferroic properties, proper band gaps and ultrahigh ferroelectric polarization of BiFeO3, such as data storage, optical utilization in visible light regions and synapse-like function. Here, this work aims to offer a systematic review on the progress of BiFeO3-based heterostructures. In the first part, the optical, electric, magnetic, and valley properties and their interactions in BiFeO3-based heterostructures are briefly reviewed. In the second part, the morphologies of BiFeO3 and medium materials in the heterostructures are discussed. Particularly, in the third part, the physical properties and underlying mechanism in BiFeO3-based heterostructures are discussed thoroughly, such as the photovoltaic effect, electric field control of magnetism, resistance switching, and two-dimensional electron gas and valley characteristics. The fourth part illustrates the applications of BiFeO3-based heterostructures based on the materials and physical properties discussed in the second and third parts. This review also includes a future prospect, which can provide guidance for exploring novel physical properties and designing multifunctional devices.

Photoelectrocatalytic production of solar fuels with semiconductor oxides: materials, activity and modeling

Transition metal oxides keep on being excellent candidates as electrode materials for the photoelectrochemical conversion of solar energy into chemical energy.

Ferroelectric Materials: A Novel Pathway for Efficient Solar Water Splitting

Over the past few decades, solar water splitting has evolved into one of the most promising techniques for harvesting hydrogen using solar energy. Despite the high potential of this process for hydrogen production, many research groups have encountered significant challenges in the quest to achieve a high solar-to-hydrogen conversion efficiency. Recently, ferroelectric materials have attracted much attention as promising candidate materials for water splitting. These materials are among the best candidates for achieving water oxidation using solar energy. Moreover, their characteristics are changeable by atom substitute doping or the fabrication of a new complex structure. In this review, we describe solar water splitting technology via the solar-to-hydrogen conversion process. We will examine the challenges associated with this technology whereby ferroelectric materials are exploited to achieve a high solar-to-hydrogen conversion efficiency.

Enhanced Visible Light Driven Photocatalytic Behavior of BiFeO₃/Reduced Graphene Oxide Composites

BiFeO₃/Reduced Graphene Oxide (BFO/RGO) composites have been fabricated by a simple hydrothermal method. The X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman, and X-ray photoelectron spectroscopy (XPS) analysis reveal that graphene oxide was reduced in hydrothermal process and BFO/RGO composites were successfully synthesized. UV-visible absorption and photoluminescence properties show that the introduction of RGO can effectively reduce the recombination of photogenerated electron and hole pairs. Compared to the pristine BFO, the photocatalytic performance of BiFeO₃ Graphene Oxide (BGO) composites is enhanced for the degradation of Methylene blue (MB) solution under visible light irradiation, and the result shows that the optimal amount of Graphene Oxide (GO) in the composites is 60 mg (BGO60). The excellent photocatalytic performance is mainly ascribed to improved light absorption, increased reactive sites, and the low recombination rate of electron-hole pairs. This work can provide more insights into designing advanced photocatalysts for wastewater treatment and environmental protection.

Visible-Light-Mediated Electrocatalytic Activity in Reduced Graphene Oxide-Supported Bismuth Ferrite

Reduced graphene oxide (RGO)-supported bismuth ferrite (BiFeO₃) (RGO-BFO) nanocomposite is synthesized via a two-step chemical route for photoelectrochemical (PEC) water splitting and photocatalytic dye degradation. The detailed structural analysis, chemical coupling, and morphology of BFO- and RGO-supported BFO are established through X-ray diffraction, Raman and X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy studies. The modified band structure in RGO-BFO is obtained from the UV-vis spectroscopy study and supported by density functional theory (DFT). The photocatalytic degradation of Rhodamine B dye achieved under 120 min visible-light illumination is 94% by the RGO-BFO composite with a degradation rate of 1.86 × 10^-2 min^-1, which is 3.8 times faster than the BFO nanoparticles. The chemical oxygen demand (COD) study further confirmed the mineralization of an organic dye in presence of the RGO-BFO catalyst. The RGO-BFO composite shows excellent PEC performance toward water splitting, with a photocurrent density of 10.2 mA·cm^-2, a solar-to-hydrogen conversion efficiency of 3.3%, and a hole injection efficiency of 98% at 1 V (vs Ag/AgCl). The enhanced catalytic activity of RGO-BFO is explained on the basis of the modified band structure and chemical coupling between BFO and RGO, leading to the fast charge transport through the interfacial layers, hindering the recombination of the photogenerated electron-hole pair and ensuring the availability of free charge carriers to assist the catalytic activity.

Reduced graphene oxide/BiFeO3 nanohybrids-based signal-on photoelectrochemical sensing system for prostate-specific antigen detection coupling with magnetic microfluidic device

A novel magnetic controlled photoelectrochemical (PEC) sensing system was designed for sensitive detection of prostate-specific antigen (PSA) using reduced graphene oxide-functionalized BiFeO₃ (rGO-BiFeO₃) as the photoactive material and target-triggered hybridization chain reaction (HCR) for signal amplification. Remarkably enhanced PEC performance could be obtained by using rGO-BiFeO₃ as the photoelectrode material due to its accelerated charge transfer and improved the visible light absorption. Additionally, efficient and simple operation could be achieved by introducing magnetic controlled flow-through device. The assay mainly involved in anchor DNA-conjugated magnetic bead (MB-aDNA), PSA aptamer/trigger DNA (Apt-tDNA) and two glucose oxidase-labeled hairpins (H1-GOx and H2-GOx). Upon addition of target PSA, the analyte initially reacted with the aptamer to release the trigger DNA, which partially hybridized with the anchor DNA on the MB. Thereafter, the unpaired trigger DNA on the MB opened the hairpin DNA structures in sequence and propagated a chain reaction of hybridization events between two alternating hairpins to form a long nicked double-helix with numerous GOx enzymes on it. Subsequently, the enzymatic product (H₂O₂) generated and consumed the photo-excited electrons from rGO-BiFeO₃ under visible light irradiation to enhance the photocurrent. Under optimal conditions, the magnetic controlled PEC sensing system exhibited good photocurrent responses toward target PSA within the linear range of 0.001 - 100ng/mL with a detection limit of 0.31pg/mL. Moreover, favorable selectivity, good stability and satisfactory accuracy were obtained. The excellent analytical performance suggested that the rGO-BiFeO₃-based PEC sensing platform could be a promising tool for sensitive, efficient and low cost detection of PSA in disease diagnostics.

Improved photocathodic performance in Pt catalyzed ferroelectric BiFeO3 films sandwiched by a porous carbon layer

A porous carbon buffer layer loaded with Pt is very effective for enhancing the solar-driven H₂ production by the ferroelectric BiFeO₃ film.

Bismuth ferrite-based photoactive materials for the photoelectrochemical detection of disease biomarkers coupled with multifunctional mesoporous silica nanoparticles

A photoelectrochemical sensing system was designed to detect CEA on bismuth ferrite photoactive materials with target-controlled glucose release from mesoporous silica nanoparticles.