Multifunctional Electrospun Nanofibers for Enhancing Localized Cancer Treatment

Polyethylene oxide-chitosan-doxorubicin/polycaprolactone-chitosan-curcumin pH-sensitive core/shell nanofibrous mats for the treatment of breast cancer: Fabrication, characterization and in vitro and in vivo evaluation

The main objective of this study was to fabricate a pH-sensitive drug carrier based on coaxial electrospun nanofibrous mats for concurrent local delivery of hydrophilic and hydrophobic anti-cancer drugs to improve the anti-tumor efficacy on breast cancer. Therefore, co-axial electrospinning technique was applied to prepare polyethylene oxide-chitosan/polycaprolactone-chitosan (PEO-CS/PCL-CS) pH-sensitive core-shell nanofibers. Doxorubicin hydrochloride (DOX, hydrophilic anti-cancer) and curcumin (CUR, hydrophobic anticancer) were loaded into core and shell sections of the fabricated pH-sensitive coaxial nanofibers, respectively. Their structure and morphology were analyzed via SEM, TEM, TGA, and FTIR techniques. The results of in vitro release analysis indicated that the release of DOX and CUR from the fabricated nanofibers was strongly depended on pH. The combined effects of the two drugs on MCF-7 cell inhibition, as measured by the MTT assay, revealed that the 1:5 ratio of DOX to CUR resulted in a CI of 0.00492, showing the strongest synergistic effect. The results of in-vivo studies indicated that the PEO-CS-DOX/PCL-CS-CUR pH-sensitive core-shell nanofibers possessed remarkable anti-tumor efficacy. As a result, PEO-CS-DOX/PCL-CS-CUR pH-sensitive core-shell nanofibrous mats with pH-responsive and sustainable and controllable manner could improve the local anti-tumor efficacy on breast cancer via inhibiting the side effects of free DOX and CUR drugs.

Advancements in nanotechnology-driven photodynamic and photothermal therapies: mechanistic insights and synergistic approaches for cancer treatment

Cancer is a disease that involves uncontrolled cell division triggered by genetic damage to the genes that control cell growth and division. Cancer starts as a localized illness, but subsequently spreads to other areas in the human body (metastasis), making it incurable. Cancer is the second most prevalent cause of mortality worldwide. Every year, almost ten million individuals get diagnosed with cancer. Although different cancer treatment options exist, such as chemotherapy, radiation, surgery and immunotherapy, their clinical efficacy is limited due to their significant side effects. New cancer treatment options, such as phototherapy, which employs light for the treatment of cancer, have sparked a growing fascination in the cancer research community. Phototherapies are classified into two types: photodynamic treatment (PDT) and photothermal therapy (PTT). PDT necessitates the use of a photosensitizing chemical and exposure to light at a certain wavelength. Photodynamic treatment (PDT) is primarily based on the creation of singlet oxygen by the stimulation of a photosensitizer, which is then used to kill tumor cells. PDT can be used to treat a variety of malignancies. On the other hand, PTT employs a photothermal molecule that activates and destroys cancer cells at the longer wavelengths of light, making it less energetic and hence less hazardous to other cells and tissues. While PTT is a better alternative to standard cancer therapy, in some irradiation circumstances, it can cause cellular necrosis, which results in pro-inflammatory reactions that can be harmful to therapeutic effectiveness. Latest research has revealed that PTT may be adjusted to produce apoptosis instead of necrosis, which is attractive since apoptosis reduces the inflammatory response.

Electrospun zinc oxide nanoscaffolds: a targeted and selective anticancer approach

This study aims to prepare, characterize, and evaluate zinc oxide nanoscaffolds (ZnO NSs) as a potential anticancer drug that selectively targets malignant cells while remaining non-toxic to normal cells. Electrospun NSs were fabricated and loaded with varying concentrations of ZnO nanoparticles (NPs). The uniform morphology of the fabricated samples was confirmed through Field Emission Scanning Electron Microscope (FESEM) imaging. Elemental composition was investigated using Energy Dispersive X-ray spectroscopy (EDX), Fourier Transform Infrared (FTIR), and X-ray diffraction (XRD) analyses. Biocompatibility and cytotoxicity were assessed using the (3-(4.5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay) (MTT) assay and flow cytometry. The water uptake and degradation properties of the electrospun NSs were also examined. Furthermore, a cumulative release profile was generated to assess the release behavior of ZnO NSs. The prepared ZnO NSs demonstrated negligible toxicity toward normal human dermal cells. Conversely, the four used concentrations of ZnO NSs displayed substantial cytotoxicity and induced apoptosis in various cancer cell lines. The observed effects were concentration-dependent. Notably, ZnO NSs 8% exhibited the most significant reduction in cell viability against the MCF7 cell line. The findings from this study indicate the potential of ZnO NSs as an effective anticancer agent, with the ZnO NSs 8% demonstrating the most pronounced impact. This research introduces a novel application of electrospun zinc oxide nanoscaffolds, demonstrating their capacity for selective anticancer activity, particularly against breast carcinoma, while preserving normal cell viability. The study presents a significant advancement in the use of nanomaterial for targeted cancer therapy.

Biomaterial-Based Sustained-Release Drug Formulations for Localized Cancer Immunotherapy

Cancer immunotherapy has revolutionized clinical cancer treatments by taking advantage of the immune system to selectively and effectively target and kill cancer cells. However, clinical cancer immunotherapy treatments often have limited efficacy and/or present severe adverse effects associated primarily with their systemic administration. Localized immunotherapy has emerged to overcome these limitations by directly targeting accessible tumors via local administration, reducing potential systemic drug distribution that hampers drug efficacy and safety. Sustained-release formulations can prolong drug activity at target sites, which maximizes the benefits of localized immunotherapy to increase the therapeutic window using smaller dosages than those used for systemic injection, avoiding complications of frequent dosing. The performance of sustained-release formulations for localized cancer immunotherapy has been validated preclinically using various implantable and injectable scaffold platforms. This review introduces the sustained-release formulations developed for localized cancer immunotherapy and highlights their biomaterial-based platforms for representative classes, including inorganic scaffolds, natural hydrogels, synthetic hydrogels, and microneedle patches. The design rationale and other considerations are summarized for further development of biomaterials for the construction of optimal sustained-release formulations.

Advances in Light-Responsive Smart Multifunctional Nanofibers: Implications for Targeted Drug Delivery and Cancer Therapy

Over the last decade, scientists have shifted their focus to the development of smart carriers for the delivery of chemotherapeutics in order to overcome the problems associated with traditional chemotherapy, such as poor aqueous solubility and bioavailability, low selectivity and targeting specificity, off-target drug side effects, and damage to surrounding healthy tissues. Nanofiber-based drug delivery systems have recently emerged as a promising drug delivery system in cancer therapy owing to their unique structural and functional properties, including tunable interconnected porosity, a high surface-to-volume ratio associated with high entrapment efficiency and drug loading capacity, and high mass transport properties, which allow for controlled and targeted drug delivery. In addition, they are biocompatible, biodegradable, and capable of surface functionalization, allowing for target-specific delivery and drug release. One of the most common fiber production methods is electrospinning, even though the relatively two-dimensional (2D) tightly packed fiber structures and low production rates have limited its performance. Forcespinning is an alternative spinning technology that generates high-throughput, continuous polymeric nanofibers with 3D structures. Unlike electrospinning, forcespinning generates fibers by centrifugal forces rather than electrostatic forces, resulting in significantly higher fiber production. The functionalization of nanocarriers on nanofibers can result in smart nanofibers with anticancer capabilities that can be activated by external stimuli, such as light. This review addresses current trends and potential applications of light-responsive and dual-stimuli-responsive electro- and forcespun smart nanofibers in cancer therapy, with a particular emphasis on functionalizing nanofiber surfaces and developing nano-in-nanofiber emerging delivery systems for dual-controlled drug release and high-precision tumor targeting. In addition, the progress and prospective diagnostic and therapeutic applications of light-responsive and dual-stimuli-responsive smart nanofibers are discussed in the context of combination cancer therapy.

Implantable, 3D-Printed Alginate Scaffolds with Bismuth Sulfide Nanoparticles for the Treatment of Local Breast Cancer via Enhanced Radiotherapy

Surgical removal of tumor tissue remains the primary clinical approach for addressing breast cancer; however, complete tumor excision is challenging, and the remaining tumor cells can lead to tumor recurrence and metastasis over time, which substantially deteriorates the life quality of the patients. With the aim to improve local cancer radiotherapy, this work reports the fabrication of alginate (Alg) scaffolds containing bovine serum albumin (BSA)-coated bismuth sulfide (Bi2S3@BSA) nanoradiosensitizers using three-dimensional (3D) printing. Under single-dose X-ray irradiation in vitro, Alg-Bi2S3@BSA scaffolds significantly increase the formation of reactive oxygen species, enhance the inhibition of breast cancer cells, and suppress their colony formation capacity. In addition, scaffolds implanted under tumor tissue in murine model show high therapeutic efficacy by reducing the tumor volume growth rate under single-dose X-ray irradiation, while histological observation of main organs reveals no cytotoxicity or side effects. 3D-printed Alg-Bi2S3@BSA scaffolds produced with biocompatible and biodegradable materials may potentially lower the recurrence and metastasis rates in breast cancer patients by inhibiting residual tumor cells following postsurgery as well as exhibit anticancer properties in other solid tumors.

Target-initiated triplex signal amplification cascades for non-label and sensitive fluorescence sensing of microRNA

The aberrant expression of microRNAs (miRs) in cells is closely linked to the initiation and progression of various diseases. Sensitive monitoring of their level is hence vital for biomedical research and disease diagnosis. Herein, a highly sensitive and non-label fluorescence sensor based on multiple recycling signal amplification cascades is constructed for the detection of miR-21 in human sera. The presence of miR-21 initiates the primer-fueled target recycling process for the generation of many primer/hairpin templates for the subsequent auto-cycling primer extension (APE) amplification cycles, which result in the formation of lots of long-stem hairpins. The enzyme-based cleavage of such hairpins via polymerization/excision cycles further leads to the generation of abundant G-quadruplex strands, which associate with the thioflavin T (ThT) dye to emit remarkably magnified fluorescence for detecting miR-21 in the range of 1 pM-100 nM with a 0.32 pM detection limit without labeling the probes. Besides, the proposed assay can selectively discriminate miR-21 against other control molecules and realize the sensing of low levels of miR-21 in diluted sera. With features of high sensitivity via the triplex signal amplification cycles and simplicity in a non-label homogeneous manner, our miR sensing protocol can be a robust means for detecting various nucleic acids for the early diagnosis of diseases.

Light-Responsive Layer-By-Layer Film Containing Gold Nanorods for Sequential Drug Release

Chemically and physically stable multidrug-loaded layer-by-layer (LbL) films are promising candidates for sequential and on-demand drug release at concentrations suitable for various applications. The synergistic effect of the sequential release of drugs may enhance their therapeutic efficacy in treating skin cancer and other complex medical conditions. In this study, we prepared LbL films by alternating the deposition of cationic linear polyethylenimine, camptothecin (CPT)-loaded gold nanorods (GNRs), anionic poly(styrenesulfonate), and doxorubicin (DOX) based on electrostatic interactions. The film exhibited loading of CPT and DOX, which could be tuned according to the requirements of the application by changing the parameters of the LbL process. Herein, CPT was encapsulated in GNRs and showed good stability and absorption in the near-infrared (NIR) range (650-900 nm). The prepared LbL film showed a pH-dependent DOX release. Subsequently, the functionalized GNRs showed excellent photothermal properties, which assisted the on-demand release of CPT upon NIR irradiation with further release of DOX. Our results suggest that the LbL approach for sequential drug release can be an effective drug delivery platform owing to its cytocompatibility, anticancer effects, and stimuli-responsive properties.

Peptide-Hydrogel Nanocomposites for Anti-Cancer Drug Delivery

Cancer is the second leading cause of death globally, but conventional anticancer drugs have side effects, mainly due to their non-specific distribution in the body in both cancerous and healthy cells. To address this relevant issue and improve the efficiency of anticancer drugs, increasing attention is being devoted to hydrogel drug-delivery systems for different kinds of cancer treatment due to their high biocompatibility and stability, low side effects, and ease of modifications. To improve the therapeutic efficiency and provide multi-functionality, different types of nanoparticles (NPs) can be incorporated within the hydrogels to form smart hydrogel nanocomposites, benefiting the advantages of both counterparts and suitable for advanced anticancer applications. Despite many papers on non-peptide hydrogel nanocomposites, there is limited knowledge about peptide-based nanocomposites, specifically in anti-cancer drug delivery. The aim of this short but comprehensive review is, therefore, to focus attention on the synergies resulting from the combination of NPs with peptide-based hydrogels. This review, which includes a survey of recent advances in this kind of material, does not aim to be an exhaustive review of hydrogel technology, but it instead highlights recent noteworthy publications and discusses novel perspectives to provide valuable insights into the promising synergic combination of peptide hydrogels and NPs for the design of novel anticancer drug delivery systems.

Implantable smart hyperthermia nanofibers for cancer therapy: Challenges and opportunities

Nanofibers (NFs) with practical drug-loading capacities, high stability, and controllable release have caught the attention of investigators due to their potential applications in on-demand drug delivery devices. Developing novel and efficient multidisciplinary management of locoregional cancer treatment through the design of smart NF-based systems integrated with combined chemotherapy and hyperthermia could provide stronger therapeutic advantages. On the other hand, implanting directly at the tumor area is a remarkable benefit of hyperthermia NF-based drug delivery approaches. Hence, implantable smart hyperthermia NFs might be very hopeful for tumor treatment in the future and provide new avenues for developing highly efficient localized drug delivery systems. Indeed, features of the smart NFs lead to the construction of a reversibly flexible nanostructure that enables hyperthermia and facile switchable release of antitumor agents to eradicate cancer cells. Accordingly, this study covers recent updates on applications of implantable smart hyperthermia NFs regarding their current scope and future outlook. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants.

Targeting Adhesive Tumor Adventitia via Injectable Electrospun Short Fibers in Perfusion of Intraperitoneal Sporadic Tumors

Intraperitoneal sporadic tumor is a common and complicated syndrome in cancers, causing a high rate of death, and people find that intraperitoneal chemotherapy (IPC) can treat intraperitoneal sporadic tumors better than intravenous chemotherapy and surgery. However, the effectiveness and side effects of IPC are controversial, and the operation process of IPC is complicated. Herein, the injectable paclitaxel-loaded (PTX-loaded) electrospun short fibers are constructed through a series process of electrospinning, homogenizing, crosslinking, and subsequent polydopamine coating and folate acid (FA) modification. The evenly dispersed short fibers exhibited effective tumor cell killing and good injectable ability, which is convenient to use and greatly improved the complex operation procedure. Mussel-like protein poly-dopamine coating and FA modification endowed short fibers with the ability of targeted adhesion to tumors, and therefore the short fibers further acted as a kind of micro membrane that could release drugs to tumors at close range, maintaining local high drug concentration and prevent paclitaxel killing normal tissues. Thus, the target-adhesive injectable electrospun short fibers are expected to be the potential candidate for cancer treatment, especially the intraperitoneal sporadic tumors, which are hard to treat by surgery or intravenous chemotherapy.

Electrospun Polymeric Fibers Decorated with Silk Microcapsules via Encapsulation and Surface Immobilization for Drug Delivery

Hollow polymer microcapsules as drug carriers have the advantages of drug protection, storage, and controlled release. Microcapsules combined with tissue engineering scaffolds such as electrospun microfibers can enhance long-term local drug retention. However, the combination methods of microcapsules and fibers still need to be further explored. Here, different technical approaches to functionalize electrospun polycaprolactone (PCL) microfibers with silk fibroin (SF) microcapsules through encapsulation and surface immobilization are developed, including direct blending and emulsion electrospinning for encapsulation, as well as covalent and cleavable disulfide-linkage for surface immobilization. The results of "blending" approach show that silk microcapsules with different sizes could be uniformly encapsulated inside electrospun fibers without aggregation. To further reduce the use of organic solvents, the microcapsules in the aqueous phase can be uniformly distributed in the PCL organic phase and successfully electrospun into fibers using surfactant span-80. For surface immobilization, silk microcapsules are efficiently covalent binding to the surface of electrospun PCL fibers via click chemistry and exhibited noncytotoxic. Based on this method, with the incorporation of a disulfide bond, the linkages between microcapsule and fiber could be cleaved under reducing conditions. These microcapsule-electrospun fiber combination methods provide sufficient options for different drug delivery requirements.

Prolonged Anesthesia Effects of Locally Administered Ropivacaine via Electrospun Poly(caprolactone) Fibrous Membranes

Prolonged analgesia is important to safeguard the patient's comfort and safety during and after surgery in clinical practice. To meet the demand for prolonged analgesia, medical professionals often resort to increasing drug frequency, which may lead to poor patient compliance and serious complications due to drug overdose. Therefore, it is of great interest to develop controlled-release drug delivery systems for local anesthetics, enabling slow and controlled drug release to prolong the analgesic effect and minimize systemic toxicity. In this study, we utilized an electrospinning technique to fabricate nonwoven poly(caprolactone) (PCL) fibrous membranes loaded with Ropivacaine and performed proof-of-principle experiments on both in vitro drug release tests and in vivo animal tests, to further prolong the analgesic effect of Ropivacaine and improve postoperative local pain management and chronic pain treatment. Material characterization and in vitro drug release studies confirmed the feasibility of the Ropivacaine-loaded PCL fibrous membranes for sustained release. The drug loading content and drug loading efficiency of Ropivacaine-loaded fibrous membrane are 8.7 ± 0.3 wt% and 96 ± 3 wt%, respectively. Evaluation in an animal model demonstrated prolonged anesthesia effects along with excellent biocompatibility and stability. At 72 h, the cumulative release accounted for approximately 50% of the drug loading content. This study offers novel approaches and strategies for clinical postoperative pain management and chronic pain treatment, while providing new insights and directions for the design of local anesthetic controlled-release delivery systems.

Electrospun Drug-Loaded and Gene-Loaded Nanofibres: The Holy Grail of Glioblastoma Therapy?

To date, GBM remains highly resistant to therapies that have shown promising effects in other cancers. Therefore, the goal is to take down the shield that these tumours are using to protect themselves and proliferate unchecked, regardless of the advent of diverse therapies. To overcome the limitations of conventional therapy, the use of electrospun nanofibres encapsulated with either a drug or gene has been extensively researched. The aim of this intelligent biomaterial is to achieve a timely release of encapsulated therapy to exert the maximal therapeutic effect simultaneously eliminating dose-limiting toxicities and activating the innate immune response to prevent tumour recurrence. This review article is focused on the developing field of electrospinning and aims to describe the different types of electrospinning techniques in biomedical applications. Each technique describes how not all drugs or genes can be electrospun with any method; their physico-chemical properties, site of action, polymer characteristics and the desired drug or gene release rate determine the strategy used. Finally, we discuss the challenges and future perspectives associated with GBM therapy.

Multilayered Polyurethane/Poly(vinyl alcohol) Nanofibrous Mats for Local Topotecan Delivery as a Potential Retinoblastoma Treatment

Local chemotherapy using polymer drug delivery systems has the potential to treat some cancers, including intraocular retinoblastoma, which is difficult to treat with systemically delivered drugs. Well-designed carriers can provide the required drug concentration at the target site over a prolonged time, reduce the overall drug dose needed, and suppress severe side effects. Herein, nanofibrous carriers of the anticancer agent topotecan (TPT) with a multilayered structure composed of a TPT-loaded inner layer of poly(vinyl alcohol) (PVA) and outer covering layers of polyurethane (PUR) are proposed. Scanning electron microscopy showed homogeneous incorporation of TPT into the PVA nanofibers. HPLC-FLD proved the good loading efficiency of TPT (≥85%) with a content of the pharmacologically active lactone TPT of more than 97%. In vitro release experiments demonstrated that the PUR cover layers effectively reduced the initial burst release of hydrophilic TPT. In a 3-round experiment with human retinoblastoma cells (Y-79), TPT showed prolonged release from the sandwich-structured nanofibers compared with that from a PVA monolayer, with significantly enhanced cytotoxic effects as a result of an increase in the PUR layer thickness. The presented PUR-PVA/TPT-PUR nanofibers appear to be promising carriers of active TPT lactone that could be useful for local cancer therapy.

Electrospun polymer fibers modified with FK506 for the long-term treatment of acute cardiac allograft rejection in a heart transplantation model

FK506, a first-line immunosuppressant, is routinely administered orally and intravenously following heart transplantation. However, frequent administration can result in a substantial psychological burden to patients, resulting in non-adherence to medication. The purpose of our study is to overcome the disadvantages of systemic drug administration by developing a polymer-based delivery system that is tunable and biodegradable and that can release highly hydrophobic FK506 over extended periods to treat or prevent acute cardiac allograft rejection. Using an electrospinning method, long-acting microfibers were prepared, and FK506 appeared to be continuously released for up to 14 days based on the in vitro release profiles. After implanting the microfiber subcutaneously into the abdominals of transplanted rats, it was found that the infiltration of T cells and macrophages and the secretion of interleukin-2 (IL-2) and IL-1β were significantly reduced compared with those of the free FK506 groups. More importantly, the mean survival time (MST) of the PCL-FK506 group was significantly extended in comparison with that of untreated control recipients and free FK506 (MST of untreated control recipients, free FK506, and PCL-FK506 was 8, 26.1, and 37, respectively). In conclusion, we propose that this drug delivery approach would be suitable for developing long-lasting immunomodulatory agents that prolong cardiac graft survival safely and effectively.

The Extracellular Matrix: Its Composition, Function, Remodeling, and Role in Tumorigenesis

The extracellular matrix (ECM) is a ubiquitous member of the body and is key to the maintenance of tissue and organ integrity. Initially thought to be a bystander in many cellular processes, the extracellular matrix has been shown to have diverse components that regulate and activate many cellular processes and ultimately influence cell phenotype. Importantly, the ECM's composition, architecture, and stiffness/elasticity influence cellular phenotypes. Under normal conditions and during development, the synthesized ECM constantly undergoes degradation and remodeling processes via the action of matrix proteases that maintain tissue homeostasis. In many pathological conditions including fibrosis and cancer, ECM synthesis, remodeling, and degradation is dysregulated, causing its integrity to be altered. Both physical and chemical cues from the ECM are sensed via receptors including integrins and play key roles in driving cellular proliferation and differentiation and in the progression of various diseases such as cancers. Advances in 'omics' technologies have seen an increase in studies focusing on bidirectional cell-matrix interactions, and here, we highlight the emerging knowledge on the role played by the ECM during normal development and in pathological conditions. This review summarizes current ECM-targeted therapies that can modify ECM tumors to overcome drug resistance and better cancer treatment.

Photothermally Controlled Drug Release of Poly(d,l-lactide) Nanofibers Loaded with Indocyanine Green and Curcumin for Efficient Antimicrobial Photodynamic Therapy

Chronic wound infections with antibiotic-resistant bacteria have become a significant problem for modern healthcare systems since they are often associated with high costs and require profound topical wound management. Successful wound healing is achieved by reducing the bacterial load of the wound and providing an environment that enhances cell growth. In this context, nanofibers show remarkable success because their structure offers a promising drug delivery platform that can mimic the native extracellular matrix and accelerate cell proliferation. In our study, single-needle electrospinning, a versatile and cost-efficient technique, was used to shape polymers into an applicable and homogeneous fleece capable of a photothermally triggered drug release. It was combined with antimicrobial photodynamic therapy, a promising procedure against resistant bacteria. Therefore, poly(d,l-lactide) nanofibers loaded with curcumin and indocyanine green (ICG) were produced for local antimicrobial treatment. The mesh had a homogeneous structure, and the nanofibers showed a smooth surface. Recordings with a thermal camera showed that near-infrared light irradiation of ICG increased the temperature (>44 °C) in the surrounding medium. Release studies confirmed more than 29% enhanced curcumin release triggered by elevated temperature. The antimicrobial activity was tested against the gram-positive strain Staphylococcus saprophyticus subsp. bovis and the gram-negative strain Escherichia coli DH5 alpha. The nanofibers loaded with both photosensitizers and irradiated with both wavelengths reduced the bacterial viability (~4.4 log₁₀, 99.996%) significantly more than the nanofibers loaded with only one photosensitizer (<1.7 log₁₀, 97.828%) or irradiated with only one wavelength (<2.0 log₁₀, 98.952%). In addition, our formulation efficiently eradicated persistent adhered bacteria by >4.3 log₁₀ (99.995%), which was also confirmed visually. Finally, the produced nanofibers showed good biocompatibility, proven by the cellular viability of mouse fibroblasts (L929). The data demonstrate that we have developed a new economic nanofiber formulation, which offers a triggered drug release, excellent antimicrobial properties, and good biocompatibility.

Electrospun Nanofibrous Membranes: A Versatile Medium for Waterproof and Breathable Application

Waterproof and breathable membranes that prevent liquid water penetration, while allowing air and moisture transmission, have attracted significant attention for various applications. Electrospun nanofiber materials with adjustable pore structures, easily tunable wettability, and good pore connectivity, have shown significant potential for constructing waterproof and breathable membranes. Herein, a systematic overview of the recent progress in the design, fabrication, and application of waterproof and breathable nanofibrous membranes is provided. The various strategies for fabricating the membranes mainly including one-step electrospinning and post-treatment of nanofibers are given as a starting point for the discussion. The different design concepts and structural characteristics of each type of waterproof and breathable membrane are comprehensively analyzed. Then, some representative applications of the membranes are highlighted, involving personal protection, desalination, medical dressing, and electronics. Finally, the challenges and future perspectives associated with waterproof and breathable nanofibrous membranes are presented.

Enzyme-Enhanced Codelivery of Doxorubicin and Bcl-2 Inhibitor by Electrospun Nanofibers for Synergistic Inhibition of Prostate Cancer Recurrence

One of the great challenges of postoperative prostate cancer management is tumor recurrence. Although postoperative chemotherapy presents benefits to inhibit unexpected recurrence, it is still limited due to the drug resistance or intolerable complications of some patients. Electrospun nanofiber, as a promising drug carrier, demonstrating sustained drug release behavior, can be implanted into the tumor resection site during surgery and is conductive to tumor inhibition. Herein, we fabricated electrospun nanofibers loaded with doxorubicin (DOX) and ABT199 to synergistically prevent postoperative tumor recurrence. Enzymatic degradation of the biodegradable electrospun nanofibers facilitated the release of the two drugs. The primarily released DOX from the electrospun nanofibers effectively inhibited tumor recurrence. However, the sustained release of DOX led to drug resistance of the tumor cells, yielding unsatisfactory eradication of the residual tumor. Remarkably, the combined administration of DOX and ABT199, simultaneously released from the nanofibers, not only prolonged the chemotherapy by DOX but also overcame the drug resistance via inhibiting the Bcl-2 activation and thereby enhancing the apoptosis of tumor cells by ABT199. This dual-drug-loaded implant system, combining efficient chemotherapy and anti-drug resistance, offers a prospective strategy for the potent inhibition of postoperative tumor recurrence.

Polysaccharide Electrospun Nanofibers for Wound Healing Applications

As a type of biological macromolecule, natural polysaccharides have been widely used in wound healing due to their low toxicity, good biocompatibility, degradability and reproducibility. Electrospinning is a versatile and simple technique for producing continuous nanoscale fibers from a variety of natural and synthetic polymers. The application of electrospun nanofibers as wound dressings has made great progress and they are considered one of the most effective wound dressings. This paper reviews the preparation of polysaccharide nanofibers by electrospinning and their application prospects in the field of wound healing. A variety of polysaccharide nanofibers, including chitosan, starch, alginate, and hyaluronic acid are introduced. The preparation strategy of polysaccharide electrospun nanofibers and their functions in promoting wound healing are summarized. In addition, the future prospects and challenges for the preparation of polysaccharide nanofibers by electrospinning are also discussed.

Injectable self-healing cellulose hydrogel based on host-guest interactions and acylhydrazone bonds for sustained cancer therapy

Tumor local chemotherapy employing injectable hydrogel reservoirs is a promising platform to achieve precise drug administration. However, balanced injectability, pH-responsiveness and long-term hydrolysis resistance of self-healing hydrogels remain appealing challenges. Herein, a modular preassembly strategy combining host-guest interactions with dynamic acylhydrazone bonds, was exploited to fabricate injectable cellulose-based hydrogels (CAAs) dressed with self-healing properties, pH-responsiveness and hydrolytic degradation resistance. Attributed to the host-guest interaction between β-cyclodextrin (CD) and 1-adamantane (AD), the hydrogels exhibited injectability, self-healing properties (healing efficiency of 97.5%) and rapid recovery (< 10 min) without external stimuli in physiological environment. Moreover, the hydrogels equipped with dynamic acylhydrazone linkages underwent slow hydrolytic degradation (> 30 days) and pH-responsive behavior, endowing the hydrogels with precise spatiotemporal drug release administration. The in vivo application of CAA as a carrier was studied using doxorubicin (DOX) model drug, and the results shows that using CAA as DOX carrier not only greatly enhances the anti-tumor efficacy of DOX, but also reduced the side effects of DOX. STATEMENT OF SIGNIFICANCE: With the preassemble approach combining host-guest interactions with dynamic acylhydrazone bonds, this work demonstrated a multi-functional self-healing hydrogel as drug carrier developed by using natural polysaccharides, which offers a new avenue for the high-value utilization of biomass. The strategy demonstrated in the present work may also supply a pathway for the preparation and regulation of hydrogels as intelligent biomedicine materials.

Drug Delivery Applications of Coaxial Electrospun Nanofibres in Cancer Therapy

Cancer is one of the most serious health problems and the second leading cause of death worldwide, and with an ageing and growing population, problems related to cancer will continue. In the battle against cancer, many therapies and anticancer drugs have been developed. Chemotherapy and relevant drugs are widely used in clinical practice; however, their applications are always accompanied by severe side effects. In recent years, the drug delivery system has been improved by nanotechnology to reduce the adverse effects of the delivered drugs. Among the different candidates, core-sheath nanofibres prepared by coaxial electrospinning are outstanding due to their unique properties, including their large surface area, high encapsulation efficiency, good mechanical property, multidrug loading capacity, and ability to govern drug release kinetics. Therefore, encapsulating drugs in coaxial electrospun nanofibres is a desirable method for controlled and sustained drug release. This review summarises the drug delivery applications of coaxial electrospun nanofibres with different structures and drugs for various cancer treatments.

Drug Delivery Systems for Photodynamic Therapy: The Potentiality and Versatility of Electrospun Nanofibers

Recently, photodynamic therapy (PDT) has become a promising approach for the treatment of a broad range of diseases, including oncological and infectious diseases. This minimally invasive and localized therapy is based on the production of reactive oxygen species (ROS) able to destroy cancer cells and inactivate pathogens by combining the use of photosensitizers (PSs), light and molecular oxygen. To overcome the drawbacks of drug systemic administration, drug delivery systems (DDS) can be used to carrier the PSs, allowing higher therapeutic efficacy and minimal toxicological effects. Polymeric nanofibers produced by electrospinning emerged as powerful platforms for drug delivery applications. Electrospun nanofibers exhibit outstanding characteristics, such as large surface area to volume ratio associated with high drug loading, high porosity, flexibility, ability to incorporate and release a wide variety of therapeutic agents, biocompatibility and biodegradability. Due to the versatility of this technique, fibers with different morphologies and functionalities, including drug release profile can be produced. The possibility of scalability makes electrospinning even more attractive for the development of DDS. This review aims to explore and show an up to date of the huge potential of electrospun nanofibers as DDS for different PDT applications and discuss the opportunities and challenges in this field. This article is protected by copyright. All rights reserved.

On-Demand Drug Delivery Systems Using Nanofibers

On-demand drug-delivery systems using nanofibers are extensively applicable for customized drug release based on target location and timing to achieve the desired therapeutic effects. A nanofiber formulation is typically created for a certain medication and changing the drug may have a significant impact on the release kinetics from the same delivery system. Nanofibers have several distinguishing features and properties, including the ease with which they may be manufactured, the variety of materials appropriate for processing into fibers, a large surface area, and a complex pore structure. Nanofibers with effective drug-loading capabilities, controllable release, and high stability have gained the interest of researchers owing to their potential applications in on-demand drug delivery systems. Based on their composition and drug-release characteristics, we review the numerous types of nanofibers from the most recent accessible studies. Nanofibers are classified based on their mechanism of drug release, as well as their structure and content. To achieve controlled drug release, a suitable polymer, large surface-to-volume ratio, and high porosity of the nanofiber mesh are necessary. The properties of nanofibers for modified drug release are categorized here as protracted, stimulus-activated, and biphasic. Swellable or degradable polymers are commonly utilized to alter drug release. In addition to the polymer used, the process and ambient conditions can have considerable impacts on the release characteristics of the nanofibers. The formulation of nanofibers is highly complicated and depends on many variables; nevertheless, numerous options are available to accomplish the desired nanofiber drug-release characteristics.

Polydopamine-assisted decoration of Se nanoparticles on curcumin-incorporated nanofiber matrices for localized synergistic tumor-wound therapy

The management of surgical wounds incurred during tumor removal procedures has become a non-negligible issue. Herein, for the first time, an implantable polymer-based nanofiber matrix is developed for postoperative tumor management by promoting wound healing and preventing cancer recurrence. The multifunctional matrix is successfully prepared by assembling chitosan-stabilized Se nanoparticles (SeNPs) at the surface of polydopamine (PDA) modified poly(ε-caprolactone)/curcumin fibres (PCL/CUR), denoted as PCL/CUR/PDA@Se. In this system, PDA as functionalized layers coated onto the PCL/CUR surface favors the effective immobilization of SeNPs through a covalent bond, as well as acts as a gatekeeper guaranteeing the sustained release of CUR. The CUR/SeNPs present excellent antitumor efficacy, respectively, which supports the nanocomposite matrix to efficiently kill cancer cells in vitro by inducing mitochondrial dysfunction caused by the ROS overproduction, and significantly suppressing the tumor growth in vivo. Additionally, due to the synergistic antioxidant activity of CUR and SeNPs, the nanofibrous matrix distinctly facilitates the adhesion and proliferation of normal fibroblast cells, and simultaneously accelerates wound healing during tumor treatments in tumor-bearing mice. These results suggest that the PCL/CUR/PDA@Se matrix with bifunctional properties is a promising candidate for local tumor-wound therapy. This work offers an innovative strategy to develop new improved post-surgery therapies for cancer patients.

Implantable magnetic nanofibers with ON-OFF switchable release of curcumin for possible local hyperthermic chemotherapy of melanoma

Implantable thermo-responsive drug-loaded magnetic nanofibers (NFs) have attracted great interest for localized thermo-chemotherapy of cancer tissue/cells. From this perspective, smart polymeric electrospun NFs co-loaded with magnetic nanoparticles (MNPs) and a natural polyphenol anticancer agent, curcumin (CUR), were developed to enhance the local hyperthermic chemotherapy against melanoma, the most serious type of skin cancer. CUR/MNPs-loaded thermo-sensitive electrospun NFs exhibited alternating magnetic field (AMF)-responsive heat generation and "ON-OFF" switchable heating capability. Besides, corresponding to the reversible alterations in the swelling ratio, the "ON-OFF" switchable discharge of CUR from the magnetic NFs was detected in response to the "ON-OFF" switching of AMF application. Due to the combinatorial effect of hyperthermia and release of CUR after applying an AMF ("ON" state) for 600 s on the second and third days of incubation time, the viability of the B16F10 melanoma cancer cells exposed to the CUR/MNPs-NFs was reduced by 40% and 17%, respectively. Taken together, the macroscopic and nanoscale features of the smart NFs led to the creation of a reversibly adjustable structure that enabled hyperthermia and facile switchable release of CUR for eradication of melanoma cancer cells.

Electrospun Nanofibers for Cancer Therapy

Lately, a remarkable progress has been recorded in the field of electrospinning for the preparation of numerous types of nanofiber scaffolds. These scaffolds present some remarkable features including high loading capacity and encapsulation efficiency, superficial area and porosity, potential for modification, structure for the co-delivery of various therapies, and cost-effectiveness. Their present and future applications for cancer diagnosis and treatment are promising and pioneering. In this chapter we provide a comprehensive overview of electrospun nanofibers (ESNFs) applications in cancer diagnosis and treatment, covering diverse types of drug-loaded electrospun nanofibers.

PLGA nanoparticle-reinforced supramolecular peptide hydrogels for local delivery of multiple drugs with enhanced synergism

Localized drug delivery offers great therapeutic efficacy at local tissues while avoiding the systemic toxicity of drugs. Yet it demands the development of structurally-stable drug carrier systems with excellent injectability, as well as the capability to facilitate controlled release of multiple drugs. Herein, we describe the design and synthesis of a supramolecular hydrogel (Cis/Peptide@NP/Irino) for the combined delivery of cisplatin (Cis) and irinotecan (Irino). The self-assembled hydrogel consisted of an inner phase of irinotecan-loaded PLGA nanoparticles (NP/Irino) and an outer phase of cisplatin-loaded peptide nanofibers (Cis/Peptide). Through the structural reinforcement of PLGA nanoparticles, the Cis/Peptide@NP/Irino hydrogel exhibited better mechanical properties than Cis/Peptide or Peptide hydrogels. With excellent shear-thinning properties, it facilitated the development of a localized drug delivery system with an improved retention time in vivo. The hydrogel incorporated two anticancer drugs, Cis and Irino, at the Peptide and PLGA domains, respectively, and exhibited a faster release of Cis prior to the continuous release of Irino in vitro. Furthermore, the Cis/Peptide@NP/Irino formulation showed a better inhibition efficacy against the proliferation of cancerous A549 cells, with the synergism of Cis and Irino exceeding that of the simple solution mixtures, which was plausibly due to the enhanced cellular uptake of drugs through endocytosis. We believe that structurally-stable supramolecular hydrogels show great promise in the local delivery of various drug combinations for cancer therapy.

In Vitro Hyperthermia Evaluation of Electrospun Polymer Composite Fibers Loaded with Reduced Graphene Oxide

Electrospun meshes (EM) composed of natural and synthetic polymers with randomly or aligned fibers orientations containing 0.5% or 1% of thermally reduced graphene oxide (TrGO) were prepared by electrospinning (ES), and their hyperthermia properties were evaluated. EM loaded with and without TrGO were irradiated using near infrared radiation (NIR) at 808 nm by varying the distance and electric potential recorded at 30 s. Morphological, spectroscopic, and thermal aspects of EM samples were analyzed by using SEM-EDS, Raman and X-ray photoelectron (XPS) spectroscopies, X-ray diffraction (XRD), and NIR radiation response. We found that the composite EM made of polyvinyl alcohol (PVA), natural rubber (NR), and arabic gum (AG) containing TrGO showed improved hyperthermia properties compared to EM without TrGO, reaching an average temperature range of 42–52 °C. We also found that the distribution of TrGO in the EM depends on the orientation of the fibers. These results allow infering that EM loaded with TrGO as a NIR-active thermal inducer could be an excellent candidate for hyperthermia applications in photothermal therapy.

Zinc sulfide nanoparticle-decorated fibre mesh to enable localized H2S-amplified chemotherapy

For the first time, we report the design and fabrication of a ZnS nanoparticle-decorated silica fibre mesh (ZnS@SiO₂) for localized H₂S-amplified chemotherapy. With incorporation of DOX, implanted ZnS@SiO₂ fibres enable sufficient on-site drug dosage and intracellular H₂S content, inducing significant in vitro and in vivo tumour inhibition.

VEGF-Modified PVA/Silicone Nanofibers Enhance Islet Function Transplanted in Subcutaneous Site Followed by Device-Less Procedure

INTRODUCTION

As heterologous islets or islet-like stem cells become optional sources for islet transplantation, the subcutaneous site appears to be an acceptable replacement of the intrahepatic site due to its graft retrievability. The device-less (DL) procedure improves the feasibility; however, some limitations such as fibrotic overgrowth or immunodeficiency still exist. Nanofibers could mimic the extracellular matrix to improve the vitality of transplanted islets. Therefore, we designed a vascular endothelial growth factor (VEGF)-modified polyvinyl alcohol (PVA)/silicone nanofiber (SiO2-VEGF) to optimize the DL procedure.

METHODS

SiO2-VEGF nanofibers were designed by nano-spinning and characterized the physical-chemical properties before subcutaneous islet transplantation. Cell viability, vessel formation, and glucose-stimulated insulin secretion were tested in vitro to ensure biocompatibility; and blood glucose level (BGL), transplanted islet function, and epithelial-mesenchymal transition (EMT)-related biomarker expression were analyzed in vivo.

RESULTS

The intensity of inflammatory reaction induced by SiO2 nanofibers was between nylon and silicone, which did not bring out excessive fibrosis. The vascularization could be enhanced by VEGF functionalization both in vitro and in vivo. The BGL control was better in the DL combined with SiO2-VEGF group. The percentage of recipients that achieved normoglycemia was higher and earlier (71% at day 57), and the intraperitoneal glucose tolerance test (IPGTT) also confirmed better islet function. The expressions of vimentin, α-SMA, and twist-1 were upregulated, which indicated that SiO2-VEGF nanofibers might promote islet function by regulating the EMT pathway.

DISCUSSION

In summary, our new SiO2-VEGF combined with DL procedure might improve the feasibility of subcutaneous islet transplantation for clinical application.

An injectable and tumor-specific responsive hydrogel with tissue-adhesive and nanomedicine-releasing abilities for precise locoregional chemotherapy

Locoregional chemotherapy, especially using implantable hydrogel depots to sustainably deliver chemotherapeutics at tumor site, has shown great potential for improving antitumor efficacy and reducing systemic toxicity. However, the hydrogel applications are limited by some intrinsic constraints, especially the contradiction between increasing drug penetration and accumulation in tumor and decreasing random drug diffusion into surrounding normal tissues. Herein, we report a unique "Jekyll and Hyde" nanoparticle-hydrogel (NP-gel) hybrid platform, which can keep dormant in adjacent normal tissues but be activated by mildly acidic and hyaluronidase-rich microenvironment in malignant tumor tissues to unidirectionally release tumor-targeting and penetrative doxorubicin (DOX)-loaded NPs. Apart from tumor-specific recognition, penetration, internalization and release, NP-gel features: shear-thinning behavior for injection, tissue-adhesiveness for continuous on-site activation, and full biodegradability for safe use. Precise delivery was clearly demonstrated in both tumor-grafted and tumor-resected mice. A single peritumoral injection of DOX-loaded NP-gel exhibited a significantly higher drug accumulation in tumor for 3 weeks than in nontarget organs and thus long-term tumor remission. More importantly, significant inhibition in tumor recurrence without detectable toxicity to healthy organs was demonstrated when applied after tumor resection. The designed system displayed long-acting and precise anticancer efficacy, paving the way toward effective tumor locoregional treatment. STATEMENT OF SIGNIFICANCE: Injectable hydrogels, allowing sustained drug delivery directly at tumor site, has shown great potential for locoregional chemotherapy. However, how to achieve tumor-specific drug accumulation but meanwhile impede the random drug diffusion into surrounding normal tissues remains an insurmountable challenge, especially considering high drug concentration gradient, higher interstitial fluid pressure and denser extracellular matrix in tumor than adjacent normal tissue. Herein, a 'Jekyll and Hyde' nanoparticle-hydrogel hybrid formulation was designed to keep dormant in adjacent normal tissues but be activated by mildly acidic and hyaluronidase-rich microenvironment in malignant tumor tissues to unidirectionally release tumor-targeting and penetrative DOX-loaded nanoparticles, leading to a significant tumor inhibition and antirecurrence efficiency without detectable toxicity to healthy organs, thus presenting great potential for precise locoregional chemotherapy.

Electrospun Nanofibers for Drug Delivery and Biosensing

Early diagnosis and efficient treatment are of paramount importance to fighting cancers. Monitoring the foreign body response of a patient to treatment therapies also plays an important role in improving the care that cancer patients receive by their medical practitioners. As such, there is extensive research being conducted into ultrasensitive point-of-care detection systems and "smart" personalized anticancer drug delivery systems. Electrospun nanofibers have emerged as promising materials for the construction of nanoscale biosensors and therapeutic platforms because of their large surface areas, controllable surface conformation, good surface modification, complex pore structure, and high biocompatibility. Electrospun nanofibers are produced by electrospinning, which is a very powerful and economically viable method of synthesizing versatile and scalable assemblies from a wide array of raw materials. This review describes the theory of electrospinning, achievements, and problems currently faced in producing effective biosensors/drug delivery systems, in particular, for cancer diagnosis and treatment. Finally, insights into future prospects are discussed.

Injectable, Biodegradable, Thermosensitive Nanoparticles-Aggregated Hydrogel with Tumor-Specific Targeting, Penetration, and Release for Efficient Postsurgical Prevention of Tumor Recurrence

High locoregional recurrence of breast cancer after surgery remains a clinically appealing challenge. Local chemotherapy, especially sustainable delivery of chemotherapeutics at tumor sites by implantable hydrogels, has shown great potential to prevent cancer recurrence. However, the applications of conventional hydrogels are often limited by their intrinsic poor drug penetration into solid tumors and nonspecific drug accumulation in adjacent normal tissues. Herein, we developed a novel modular coassembly strategy to prepare a kind of pH-sensitive, tumor-specific targeting, and penetrating peptide (CRGDK)-modified doxorubicin-based prodrug nanoparticles (PDNPs), whose aqueous dispersion can undergo sol-gel transition after in vivo injection by thermo-induced self-aggregation to in situ form biodegradable hydrogel depot (PDNPs-gel), anchoring high amounts of PDNPs at tumor sites. Because of CRGDK-mediated targeting to overexpressed neuropilin-1 receptors on tumor vessels and tumor cells, PDNPs released from PDNPs-gel can effectively penetrate into tumor tissues, specifically enter tumor cells and finally realize intracellular acid-triggered drug release. In an in vivo incomplete resection of breast cancer model, a single peritumoral administration of PDNP-gel can achieve high inhibition efficacy against tumor recurrence. In addition, the administration of PDNP-gel only involves simple redispersion of PDNPs in water without any pretreatment for gelation, providing great convenience for storage, dosage, and prescription in practical use. Collectively, the reported multifunctional nanoparticles self-aggregated hydrogel system possesses great potential for efficient postsurgical prevention of tumor recurrence.

A controllable local drug delivery system based on porous fibers for synergistic treatment of melanoma and promoting wound healing

A controllable local drug delivery system can effectively inhibit melanoma growth with chemo-photothermal synergistic therapy and accelerate wound healing.