Implications of Chemical Reduction Using Hydriodic Acid on the Antimicrobial Properties of Graphene Oxide and Reduced Graphene Oxide Membranes

Facile fabrication of 3D Janus foams of electrospun cellulose nanofibers/rGO for high efficiency solar interface evaporation

Solar-powered interfacial evaporation is one of the most efficient state-of-the-art technologies for producing clean water via desalination. Herein, we report a novel bio-based nanofibrous foam for high efficiency solar interface evaporation. To this end, a hybrid membrane of cellulose nanofibers/graphene oxide (GO) is first fabricated by electrospinning coupled with in situ layer-by-layer self-assembly technique. After that, the membrane is subjected to a foaming process in an aqueous NaBH4, which effectively transforms the 2D membrane into a 3D foam. This structure can improve the photothermal conversion efficiency and also facilitate the water transport at the gas-water interface. In the meantime, the GO is converted to the reduced GO (rGO) with a higher light absorption efficiency. Finally, one side of the foam is hydrophobically modified via spray-coating with a fluorocarbon resin (FR) to obtain the Janus type 3D foam, namely FR@EC/rGO. The resultant 3D foam combines the functions of solar energy absorption in the upper layer and water pumping capability in the lower layer. It exhibits an extraordinary solar vapor conversion efficiency of 94.2 % and a fast evaporation rate of 1.83 kg m-2 h-1, showing high potential in future seawater desalination.

2D Nanomaterials and Their Drug Conjugates for Phototherapy and Magnetic Hyperthermia Therapy of Cancer and Infections

Photothermal therapy (PTT) and magnetic hyperthermia therapy (MHT) using 2D nanomaterials (2DnMat) have recently emerged as promising alternative treatments for cancer and bacterial infections, both important global health challenges. The present review intends to provide not only a comprehensive overview, but also an integrative approach of the state-of-the-art knowledge on 2DnMat for PTT and MHT of cancer and infections. High surface area, high extinction coefficient in near-infra-red (NIR) region, responsiveness to external stimuli like magnetic fields, and the endless possibilities of surface functionalization, make 2DnMat ideal platforms for PTT and MHT. Most of these materials are biocompatible with mammalian cells, presenting some cytotoxicity against bacteria. However, each material must be comprehensively characterized physiochemically and biologically, since small variations can have significant biological impact. Highly efficient and selective in vitro and in vivo PTTs for the treatment of cancer and infections are reported, using a wide range of 2DnMat concentrations and incubation times. MHT is described to be more effective against bacterial infections than against cancer therapy. Despite the promising results attained, some challenges remain, such as improving 2DnMat conjugation with drugs, understanding their in vivo biodegradation, and refining the evaluation criteria to measure PTT or MHT effects.

Wearable Temperature Sensors Based on Reduced Graphene Oxide Films

With the development of medical technology and increasing demands of healthcare monitoring, wearable temperature sensors have gained widespread attention because of their portability, flexibility, and capability of conducting real-time and continuous signal detection. To achieve excellent thermal sensitivity, high linearity, and a fast response time, the materials of sensors should be chosen carefully. Thus, reduced graphene oxide (rGO) has become one of the most popular materials for temperature sensors due to its exceptional thermal conductivity and sensitive resistance changes in response to different temperatures. Moreover, by using the corresponding preparation methods, rGO can be easily combined with various substrates, which has led to it being extensively applied in the wearable field. This paper reviews the state-of-the-art advances in wearable temperature sensors based on rGO films and summarizes their sensing mechanisms, structure designs, functional material additions, manufacturing processes, and performances. Finally, the possible challenges and prospects of rGO-based wearable temperature sensors are briefly discussed.

Carbonaceous CoCr LDH nanocomposite as a light-responsive sonocatalyst for treatment of a plasticizer-containing water

The carbonous-based nanocomposites of CoCr layered double hydroxide (LDH) with graphene oxide (GO) and reduced graphene oxide (rGO) were prepared. The successful synthesis of the CoCr LDH in hydrotalcite crystalline structure was deduced from the pattern obtained from X-ray diffraction, and the chemical composition of its surface was checked by X-ray photoelectron spectroscopy. The prosperous decorating of LDH on the sheets of rGO and GO was authenticated by the energy dispersive X-ray spectroscopy analysis and micrographs of scanning electron and transmission electron microscopy. The photo-assisted sonocatalytic activity of the prepared nanocomposites was appraised for the decomposition of dimethyl phthalate (DMP) as a plasticizer. The highest decomposition efficiency of 100% was obtained in the existence of CoCr LDH/rGO nanocomposite (0.5 g/L) during 20 min of reaction time via photo-assisted sonocatalysis. The rGO improved the catalytic activity of the CoCr LDH by increasing the specific surface area from 1.2 m²/g to 4.5 m²/g and reducing the band gap from 1.7 eV to 1.3 eV. Moreover, the results of the colony-forming unit method endorsed antibacterial property improvement of the CoCr LDH via hybridizing with rGO. The results of this research provide an optimistic perspective for applying carbonous-based nanocomposites of CoCr LDH as a novel catalyst with antibacterial properties in photo-assisted sonocatalytic processes.

Recent advances and mechanism of antimicrobial efficacy of graphene-based materials: a review

Graphene-based materials have undergone substantial investigation in recent years owing to their wide array of physicochemical characteristics. Employment of these materials in the current state, where infectious illnesses caused by microbes have severely damaged human life, has found widespread application in combating fatal infectious diseases. These materials interact with the physicochemical characteristics of the microbial cell and alter or damage them. The current review is dedicated to molecular mechanisms underlying the antimicrobial property of graphene-based materials. Various physical and chemical mechanisms leading to cell membrane stress, mechanical wrapping, photo-thermal ablation as well as oxidative stress exerting antimicrobial effect have also been thoroughly discussed. Furthermore, an overview of the interactions of these materials with membrane lipids, proteins, and nucleic acids has been provided. A thorough understanding of discussed mechanisms and interactions is essential to develop extremely effective antimicrobial nanomaterial for application as an antimicrobial agent.

Graphical abstract

Construction of Graphene Quantum Dot-based Dissolving Microneedle Patches for the Treatment of Bacterial Keratitis

Bacterial keratitis (BK) is an ophthalmic infection caused by bacteria and poses a risk of blindness. Numerous drugs have been used to treat BK, the majority suffered from limited effect owing to their backward antimicrobial and delivery efficacy. Herein, we evaluated the antibacterial effect of a cationic carbon-based nanomaterial, i.e., imidazole-modified graphene quantum dots (IMZ-GQDs), which exhibits disinfection rates of >90% against three typical Gram-positive strains within 3 h owing to the loss of membrane integrity and decline in membrane potential. For ocular application, we further developed IMZ-GQDs-loaded dissolving microneedle patches (IMZ-GQDs MNs) via a typical two-step micromolding method. IMZ-GQDs MNs showed sufficient dissolution and penetration for intrastromal delivery in vitro and successfully overcome the rabbit corneal epithelial layer in vivo. The excellent biocompatibility of IMZ-GQDs MNs was demonstrated both in cell and animal models, and they exhibited low cytotoxicity, low invasiveness and low ocular irritation. The topical application of IMZ-GQDs MNs has the benefits of both high antibacterial activity and effective drug delivery, thereby leading to the resolution of Staphylococcus aureus-induced BK in rabbits in 7 days. Therefore, IMZ-GQDs MNs is a promising approach for BK treatment, which is safe and efficient.

Tunable Interlayer Interactions in Reduced Graphene Oxide Paper

Free-standing graphene-based paper-like materials have garnered significant interest for various applications because of their tunable physical and chemical properties, along with unique multilayered structures. Because of the layered configuration of graphene paper, characterization of the interactions between graphene sheets is critical for understanding its fundamental properties and applications. We investigate the interlayer cohesion energies in graphene papers using the mode I fracture concept with double cantilever beam specimens. Mechanical separation along the middle of the graphene paper thickness enables the evaluation of interlayer bonding strength in the paper. Starting from graphene oxide paper, the chemical reduction using hydroiodic acid tunes the interlayer cohesion energy from 11.30 ± 0.25 to 4.78 ± 0.18 J/m² as the reduction time increases. The interlayer cohesion energy is correlated with the oxygen content, interlayer spacing, and electrical conductivity of graphene papers. This work provides a fundamental characterization of the interlayer cohesion energy of graphene paper and establishes the potential for tunability of the interlayer interactions in graphene paper.

Antimicrobial peptides: Sustainable application informed by evolutionary constraints

The proliferation and global expansion of multidrug-resistant (MDR) bacteria have deepened the need to develop novel antimicrobials. Antimicrobial peptides (AMPs) are regarded as promising antibacterial agents because of their broad-spectrum antibacterial activity and multifaceted mechanisms of action with non-specific targets. However, if AMPs are to be applied sustainably, knowledge of how they induce resistance in pathogenic bacteria must be mastered to avoid repeating the traditional antibiotic resistance mistakes currently faced. Furthermore, the evolutionary constraints on the acquisition of AMP resistance by microorganisms in the natural environment, such as functional compatibility and fitness trade-offs, inform the translational application of AMPs. Consequently, the shortcut to achieve sustainable utilization of AMPs is to uncover the evolutionary constraints of bacteria on AMP resistance in nature and find the tricks to exploit these constraints, such as applying AMP cocktails to minimize the efficacy of selection for resistance or combining nanomaterials to maximize the costs of AMP resistance. Altogether, this review dissects the benefits, challenges, and opportunities of utilizing AMPs against disease-causing bacteria, and highlights the use of AMP cocktails or nanomaterials to proactively address potential AMP resistance crises in the future.

MOF-Like 3D Graphene-Based Catalytic Membrane Fabricated by One-Step Laser Scribing for Robust Water Purification and Green Energy Production

Increasing both clean water and green energy demands for survival and development are the grand challenges of our age. Here, we successfully fabricate a novel multifunctional 3D graphene-based catalytic membrane (3D-GCM) with active metal nanoparticles (AMNs) loading for simultaneously obtaining the water purification and clean energy generation, via a "green" one-step laser scribing technology. The as-prepared 3D-GCM shows high porosity and uniform distribution with AMNs, which exhibits high permeated fluxes (over 100 L m^-2 h^-1) and versatile super-adsorption capacities for the removal of tricky organic pollutants from wastewater under ultra-low pressure-driving (0.1 bar). After adsorption saturating, the AMNs in 3D-GCM actuates the advanced oxidization process to self-clean the fouled membrane via the catalysis, and restores the adsorption capacity well for the next time membrane separation. Most importantly, the 3D-GCM with the welding of laser scribing overcomes the lateral shear force damaging during the long-term separation. Moreover, the 3D-GCM could emit plentiful of hot electrons from AMNs under light irradiation, realizing the membrane catalytic hydrolysis reactions for hydrogen energy generation. This "green" precision manufacturing with laser scribing technology provides a feasible technology to fabricate high-efficient and robust 3D-GCM microreactor in the tricky wastewater purification and sustainable clean energy production as well.

Graphene Oxide (GO) Materials-Applications and Toxicity on Living Organisms and Environment

Graphene-based materials have attracted much attention due to their fascinating properties such as hydrophilicity, high dispersion in aqueous media, robust size, high biocompatibility, and surface functionalization ability due to the presence of functional groups and interactions with biomolecules such as proteins and nucleic acid. Modified methods were developed for safe, direct, inexpensive, and eco-friendly synthesis. However, toxicity to the environment and animal health has been reported, raising concerns about their utilization. This review focuses primarily on the synthesis methods of graphene-based materials already developed and the unique properties that make them so interesting for different applications. Different applications are presented and discussed with particular emphasis on biological fields. Furthermore, antimicrobial potential and the factors that affect this activity are reviewed. Finally, questions related to toxicity to the environment and living organisms are revised by highlighting factors that may interfere with it.

Bi-functional super-hydrophilic/underwater super-oleophobic 2D lamellar Ti3C2Tx MXene/poly (arylene ether nitrile) fibrous composite membrane for the fast purification of emulsified oil and photodegradation of hazardous organics

Developing the multi-functional membranes including oil/water emulsion separation and removal of hazardous organic pollutants is essential to the purification of the complicated wastewater. However, it remains a daunting challenge to combine these intended functions while maintaining high separation efficiency. Herein, we developed a new 2D lamellar MXene/poly (arylene ether nitrile) (PEN) fibrous composite membrane through the self-assembly of TiO₂ nanoparticles intercalated MXene nanosheets onto the porous PEN nanofibrous mats and bioinspired polydopamine triggered chemical-crosslinking with polyethyleneimine (PEI). Such nano-intercalation and mussel-inspired crosslinking could effectively regulate the interlayer spacing of the MXene nanosheet skin layer and surface wettability of the composite membrane, which also further contributed to the fast separation and unique bifunctional feature. It was found that the MXene@TiO₂/PEN fibrous composite membrane exhibited low oil-adhesion and superhydrophilic (WCA = 0°)/underwater superoleophobic (UOCA > 155°) properties, which could efficiently separate various surfactant-stabilized oil-in-water emulsions under low pressure of 0.04 MPa while keeping good stability (Under 1 M HCl and 2 M NaOH solutions) and recyclability. Interestingly, the fibrous composite membrane achieved favorable permeation flux of 908-1003 Lm^-2h^-1 (2270-2507.5 Lm^-2h^-1bar^-1) in comparison to other reported MXene based multifunctional composite membranes. Moreover, owing to the synergistic effect of MXene nanosheets and TiO₂ nanoparticles, the MXene@TiO₂/PEN membrane showed excellent photocatalytic degradation performance for various dyes under visible light, i.e. the photocatalytic degradation efficiency for 15 ppm MB, MO, CV, and MeB solutions achieved 92.31%, 93.50%, 98.06%, and 99.30% within 60 min, respectively. Such 2D MXene bio-functional composite membranes with outstanding oil/water emulsions separation and photocatalytic degradation of dyes pave an avenue for treating complicated oily wastewater.

Preparation of graphene-starch composite film and its application in sensor materials

In this work, a composite film was prepared by combining reduced graphene oxide (RGO) and starch nanocrystals (SNC). The results show that SNC can be well dispersed on graphene after mixed with the graphene oxide solutions. SNC had a greater impact on the morphology and microstructure of the composite film. Moreover, the introduction of SNC and the efficient reduction process of graphene oxide (GO) render these composite films good mechanical properties as well as high electrical conductivity. The tensile strength of the composite film was improved after being combined with graphene. However, as the addition rate of SNC increased, the strain-to-failure of the composite film decreased. Therefore, 10% reduced graphene-starch nanocrystals (10%RGO-SNC) was used as multifunctional sensor materials. And it had strong responses to different external stimuli, such as, temperature, humidity, bending/stretching, and solutions.

Modification strategies of membranes with enhanced Anti-biofouling properties for wastewater Treatment: A review

This review addresses composite membranes used for wastewater treatment, focusing heavily on the anti-biofouling properties of such membranes. Biofouling caused by the development of a thick biofilm on the membrane surface is a major issue that reduces water permeance and reduces its lifetime. Biofilm formation and adhesion are mitigated by modifying membranes with two-dimensional or zero-dimensional carbon-based nanomaterials or their modified substituents. In particular, nanomaterials based on graphene, including graphene oxide and carbon quantum dots, are mainly used as nanofillers in the membrane. Functionalization of the nanofillers with various organic ligands or compositing the nanofiller with other materials, such as silver nanoparticles, enhances the bactericidal ability of composite membranes. Moreover, such membrane modifications reduce biofilm adhesion while increasing water permeance and salt/dye rejection. This review discusses the recent literature on developing graphene oxide-based and carbon quantum dot-based composite membranes for biofouling-resistant wastewater treatment.

Physical and Chemical Sensors on the Basis of Laser-Induced Graphene: Mechanisms, Applications, and Perspectives

Laser-induced graphene (LIG) is produced rapidly by directly irradiating carbonaceous precursors, and it naturally exhibits as a three-dimensional porous structure. Due to advantages such as simple preparation, time-saving, environmental friendliness, low cost, and expanding categories of raw materials, LIG and its derivatives have achieved broad applications in sensors. This has been witnessed in various fields such as wearable devices, disease diagnosis, intelligent robots, and pollution detection. However, despite LIG sensors having demonstrated an excellent capability to monitor physical and chemical parameters, the systematic review of synthesis, sensing mechanisms, and applications of them combined with comparison against other preparation approaches of graphene is still lacking. Here, graphene-based sensors for physical, biological, and chemical detection are reviewed first, followed by the introduction of general preparation methods for the laser-induced method to yield graphene. The preparation and advantages of LIG, sensing mechanisms, and the properties of different types of emerging LIG-based sensors are comprehensively reviewed. Finally, possible solutions to the problems and challenges of preparing LIG and LIG-based sensors are proposed. This review may serve as a detailed reference to guide the development of LIG-based sensors that possess properties for future smart sensors in health care, environmental protection, and industrial production.

Spontaneous Adsorption of Graphene Oxide on Multiple Polymeric Surfaces

The controllable integration of low-dimensional nanomaterials on solid surfaces is pivotal for the fabrication of next-generation miniaturized electronic and optoelectronic devices. For instance, organization of two-dimensional (2D) nanomaterials on polymeric surfaces paves the way for the development of flexible electronics for applications in wearable devices. Nevertheless, the understanding of the molecular interactions between these nanomaterials and the polymeric surfaces remains limited, which impedes the rational design of 2D nanomaterial-based functional coatings. In the current work, we report that graphene oxide (GO) nanosheets, in their dispersion phase, can be adsorbed on multiple polymeric surfaces in a spontaneous manner. Both experimental findings and simulational results indicate that the main driving force is hydrogen bonding interactions, although other molecular interactions such as polarity and dispersion ones contribute to the adsorption as well. The relatively high hydrogen bonding interactions cause not only increased GO surface coverage but also enhanced GO adsorption kinetics on polymeric surfaces. The adsorbed GO layers are robust, which can be explained by the large aspect ratios of GO nanosheets and the presence of multiple spots for molecular interactions. As a proof of concept, GO-covered polymethyl methacrylate effectively decreases surface static charges when compared with its pristine counterpart. The integration of the GO constituents turns many inert polymeric substrates into multifunctional hybrids, and the functional groups on GO can be used further to bridge with additional functional materials for the development of high-performance electronic devices.

Bio-Inspired Electronic Textile Yarn-Based NO2 Sensor Using Amyloid-Graphene Composite

Graphene-based e-textile gas sensors have received significant attention as wearable electronic devices for human healthcare and environmental monitoring. Theoretically, more the attached graphene on the devices, better is the gas-sensing performance. However, it has been hampered by poor adhesion between graphene and textile platforms. Meanwhile, amyloid nanofibrils are reputed for their ability to improve adhesion between materials, including between graphene and microorganisms. Despite that fact, there has been no attempt to apply amyloid nanofibrils to fabricate graphene-based e-textiles. By biomimicking the adhesion ability of amyloid nanofibrils, herein, we developed a graphene-amyloid nanofibril hybrid e-textile yarn (RGO/amyloid nanofibril/CY) for the detection of NO₂. Compared to traditional e-textile yarn, the RGO/amyloid nanofibril/CY showed better performance in response time, sensing efficiency, sensitivity, and selectivity for NO₂. Last, we suggested a practical use of RGO/amyloid nanofibril/CY combined with a light-emitting diode as a wearable e-textile gas sensor.

Boron Nitride Nanotube (BNNT) Membranes for Energy and Environmental Applications

Owing to their extraordinary thermal, mechanical, optical, and electrical properties, boron nitride nanotubes (BNNTs) have been attracting considerable attention in various scientific fields, making it more promising as a nanomaterial compared to other nanotubes. Recent studies reported that BNNTs exhibit better properties than carbon nanotubes, which have been extensively investigated for most environment-energy applications. Irrespective of its chirality, BNNT is a constant wide-bandgap insulator, exhibiting thermal oxidation resistance, piezoelectric properties, high hydrogen adsorption, ultraviolet luminescence, cytocompatibility, and stability. These unique properties of BNNT render it an exceptional material for separation applications, e.g., membranes. Recent studies reported that water filtration, gas separation, sensing, and battery separator membranes can considerably benefit from these properties. That is, flux, rejection, anti-fouling, sensing, structural, thermal, electrical, and optical properties of membranes can be enhanced by the contribution of BNNTs. Thus far, a majority of studies have focused on molecular simulation. Hence, the requirement of an extensive review has emerged. In this perspective article, advanced properties of BNNTs are analyzed, followed by a discussion on the advantages of these properties for membrane science with an overview of the current literature. We hope to provide insights into BNNT materials and accelerate research for environment-energy applications.

Elucidating the origin of the surface functionalization - dependent bacterial toxicity of graphene nanomaterials: Oxidative damage, physical disruption, and cell autolysis

Previous studies have shown that the toxicity of graphene nanomaterials (GNMs) to bacteria are related to the surface functionalization, however, the involved mechanisms are not fully understood. The present study aims to explore the toxic mechanisms of differentially functionalized GNMs to bacteria from the aspects of physical interaction, oxidative damage and cell autolysis. Three basic functionalization of GNMs including carboxylation (G-COOH), hydroxylation (G-OH) and amination (G-NH₂) were studied. G-COOH (66% viability vs CT group) and G-OH (54%) graphene showed higher toxicity to E. coli than G-NH₂ (96%) within 3 h at a concentration of 50 mg/L. The three materials showed distinct physical interaction modes with bacterial cells. G-COOH and G-OH contact with cell membrane via their sharp edges thus causing more damage than G-NH₂ which covered the bacteria attaching along the basal plane. The three GNMs showed similar radical generation capacities, thus the direct generation of radicals is not the mechanism causing the toxicity. Instead, the GNMs can oxidize the cellular antioxidant glutathione (GSH) thereby causing oxidative damage. The oxidative capacity follows the order: G-COOH > G-OH > G-NH₂, which correlated with the antibacterial activity. Cell autolysis, the degradation of cell wall component peptidoglycan, was found to be a new mechanism inducing the death of bacteria. G-COOH and G-OH caused more cell autolysis than G-NH₂, which accounts partially for the different toxicity of the three GNMs. The findings provide significant insights into the mechanism of GNMs toxicity to bacteria for not only the risk assessment of GNMs but also the design of graphene based antibacterial materials.

Antibacterial rGO-CuO-Ag film with contact- and release-based inactivation properties

To reduce the high operational costs of water treatment because of membrane biofouling, next-generation materials are being developed to counteract microbial growth. These modern anti-biofouling strategies are based on new membrane materials or membrane surface modifications. In this study, antimicrobial films comprising rGO, rGO-CuO, rGO-Ag, and rGO-CuO-Ag were synthesized, evaluated, and tested for potential biofouling control using Pseudomonas aeruginosa PAO1 as the model bacterium. The combined rGO-CuO-Ag film displayed enhanced reduction (10-log reduction) in biofouling in comparison to the rGO film (control), followed by the rGO-Ag film (8-log reduction) and rGO-CuO film (0-log reduction). This demonstrated that the use of mixed antimicrobial agents is more effective in reducing biofouling than that of a single agent. The rGO-CuO-Ag film exhibited consistent, controlled, and moderate release of silver (Ag) ions. The release of Ag ions produced a long-lasting antimicrobial effect. These results underscore the potential applications of combined antimicrobial surface-based agents in practice and further research.

Highly Conductive and Flexible Dopamine-Graphene Hybrid Electronic Textile Yarn for Sensitive and Selective NO2 Detection

Graphene-based electronic textile (e-textile) gas sensors have been developed for detecting hazardous NO₂ gas. For the e-textile gas sensor, electrical conductivity is a critical factor because it directly affects its sensitivity. To obtain a highly conductive e-textile, biomolecules have been used for gluing the graphene to the textile surface, though there remain areas to improve, such as poor conductivity and flexibility. Herein, we have developed a dopamine-graphene hybrid electronic textile yarn (DGY) where the dopamine is used as a bio-inspired adhesive to attach graphene to the surface of yarns. The DGY shows improved electrical conductivity (∼40 times) compared to conventional graphene-based e-textile yarns with no glue. Moreover, it exhibited improved sensing performance in terms of short response time (∼2 min), high sensitivity (0.02 μA/ppm), and selectivity toward NO₂. The mechanical flexibility and durability of the DGY were examined through a 1000-cycle bending test. For a practical application, the DGY was attempted to detect the NO_x emitted from vehicles, including gasoline, diesel, and fuel cell electric vehicles. Our results demonstrated that the DGYs-as a graphene-based e-textile gas sensor for detecting NO₂-are simple to fabricate, cheap, disposable, and mechanically stable.

Functionalized carbon-based nanomaterials and quantum dots with antibacterial activity: a review

INTRODUCTION

Emergence of antibiotic resistance in bacteria is a complicated issue, especially when treating infectious immunodeficiency related diseases. In recent years, when compared to bulk materials, nanomaterials (NMs) with specific antibacterial activities have played a novel role in treating bacterial infections. Among NMs, quantum dots (QDs), specifically carbon containing QDs including graphene oxide QD (GOQD), graphene QD (GQD), and carbon QD (CQD), have demonstrated bacteriostatic and bactericidal activities via photodynamic (PD) effects against antibiotic resistant bacteria under a certain wavelength of light.

AREA COVERED

In this mini-review, recent advances and challenges related to antibacterial and biocompatibility activities of modified GQD, GOQD, CQD, and carbon nanotubes (CNTs) are discussed.

EXPERT OPINION

Lower stability and biocompatibility of QDs at higher doses in physiological conditions are major disadvantages. In this regard, functionalization of these QDs can result in appropriate bactericidal, biocompatibility, and biodegradability properties. In the case of CNTs including single-wall carbon nanotube (SWCNTs) and multiwall carbon nanotube (MWCNTs), aspect ratio (AR) is a determinant factor for the antibacterial value. Moreover, MWCNTs show a lower antibacterial ability compared to SWCNTs, which can be improved by modifying their surface.

Room-temperature synthesis of water-dispersible sulfur-doped reduced graphene oxide without stabilizers

Sulfur-Doped graphene has attracted significant attention because of its potential uses in sensors, catalysts, and energy storage applications. In conventional approaches, the sulfur-doped graphene is fabricated with graphene oxide and sulfur-containing compounds through thermal annealing or hydrothermal process, which generally involves special equipment and heat treatment, and requires additional stabilizers to make it solution-processable. In this work, we report a facile one-step approach to synthesize water-dispersible sulfur-doped reduced graphene oxide (S-rGO). Graphene oxide (GO) could be readily reduced and converted to S-rGO simultaneously by directly mixing GO dispersion with hydrosulfide hydrate (NaSH·xH₂O) at room temperature. The sulfur doping is confirmed by high resolution S 2p XPS spectrum and element mapping. The colloidal dispersion state of S-rGO is confirmed by the investigation of Tyndall effect, the zeta potential and particle size distribution measurement. Compared with previously reported strategies, NaSH can initiate the reduction and sulfur doping at room temperature, demand no heat treatment, require no equipment and form stable aqueous S-rGO dispersion without using any stabilizer. These advantages will facilitate large-scale production of water-dispersible (sulfur doped) graphene and further boost their applications in sensors, catalysts and energy storage devices.

Room-temperature synthesis of sulfur-doped reduced graphene oxide, which can form stable aqueous dispersion without using any stabilizer.

Graphene Surfaces Interaction with Proteins, Bacteria, Mammalian Cells, and Blood Constituents: The Impact of Graphene Platelet Oxidation and Thickness

Graphene-based materials (GBMs) have been increasingly explored for biomedical applications. However, interaction between GBMs-integrating surfaces and bacteria, mammalian cells, and blood components, that is, the major biological systems in our body, is still poorly understood. In this study, we systematically explore the features of GBMs that most strongly impact the interactions of GBMs films with plasma proteins and biological systems. Films produced by vacuum filtration of GBMs with different oxidation degree and thickness depict different surface features: graphene oxide (GO) and few-layer GO (FLGO) films are more oxidized, smoother, and hydrophilic, while reduced GO (rGO) and few-layer graphene (FLG) are less or nonoxidized, rougher, and more hydrophobic. All films promote glutathione oxidation, although in a lower extent by rGO, indicating their potential to induce oxidative stress in biological systems. Human plasma proteins, which mediate most of the biological interactions, adsorb less to oxidized films than to rGO and FLG. Similarly, clinically relevant bacteria, Staphylococcus epidermidis, Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli, adhere less to GO and FLGO films, while rGO and FLG favor bacterial adhesion and viability. Surface features caused by the oxidation degree and thickness of the GBMs powders within the films have less influence toward human foreskin fibroblasts; all materials allow cell adhesion, proliferation and viability up to 14 days, despite less on rGO surfaces. Blood cells adhere to all films, with higher numbers in less or nonoxidized surfaces, despite none having caused hemolysis (<5%). Unlike thickness, oxidation degree of GBMs platelets strongly impact surface morphology/topography/chemistry of the films, consequently affecting protein adsorption and thus bacteria, fibroblasts and blood cells response. Overall, this study provides useful guidelines regarding the choice of the GBMs to use in the development of surfaces for an envisioned application. Oxidized materials appear as the most promising for biomedical applications that require low bacterial adhesion without being cytotoxic to mammalian cells.

Green graphene nanoplates for combined photo-chemo-thermal therapy of triple-negative breast cancer

Aim: Green graphene oxide (GO) nanoplates, which are reduced and stabilized by quercetin and guided by folate receptors (quercetin reduced and loaded GO nanoparticles-folic acid [FA]), were developed to mediate combined photo-chemo-thermal therapy of triple-negative breast cancer. Materials & methods: Modified Hummers method was used for the synthesis of GO followed by its reduction using quercetin, FA was then conjugated as a targeting ligand. A cytotoxicity assay, apoptosis assay and cellular uptake assay were performed in vitro in MDA-MB-231 cell line with and without irradiation of a near-infrared 808 nm laser. Results & conclusion: Quercetin reduced and loaded GO nanoparticles-FA showed significantly high cellular uptake (p < 0.001) and cytotoxic effects in MDA-MB-231 cells, which was even more prominent under the situation of near-infrared 808 nm laser irradiation, making it a potential option for treating triple-negative breast cancer.

The role of iodine in the enhancement of the supercapacitance properties of HI-treated flexible reduced graphene oxide film: an experimental study with insights from DFT simulations

Iodine on graphene frameworks enhances the specific capacitance towards supercapacitor applications.