Emerging Pyroelectric Nanogenerators to Convert Thermal Energy into Electrical Energy

Electricity out of electronic trash: Triboelectric nanogenerators from discarded smartphone displays for biomechanical energy harvesting

In the context of escalating electronic waste (e-waste) generated by the rapid evolution of electronic devices, particularly smartphones/mobiles, the imperative for effective e-waste management to mitigate adverse environmental and health consequences has become increasingly apparent. Herein, novel mobile phone-based triboelectric nanogenerators (M-TENGs) are fabricated from discarded smartphone displays of eight different brands (B1-B8) for harvesting electrical energy. Analytical characterization techniques such as SEM and EDS are employed for morphological investigation. The tribopositivity and tribonegativity of the smartphone display layers are confirmed using the FTIR technique and test materials. The percentage tensile strength of the selected triboactive layers is measured to assess the mechanical durability. The electrical measurements are performed for all eight M-TENG devices, notably the device constructed from B8 smartphone display layers outperforms other brands by generating about three and five times higher voltage and current than the M-TENG device composed of B1 layers. Further, the optimized device is subjected to frequency, force, and stability tests, and also the impact of fluctuating humidity on the device performance is analyzed. Moreover, the M-TENG demonstrates its versatility by efficiently charging commercial electrolytic capacitors, powering LEDs, and effectively harvesting biomechanical energy. Thus, the present study represents a significant step towards mitigating the challenges posed by electronic smartphone waste disposal while simultaneously offering a viable pathway to harvest electricity and power a variety of applications.

Charges Transfer in Interfaces for Energy Generating

Under the threat of energy crisis and environmental pollution, the technology for sustainable and clean energy extraction has received considerable attention. Owing to the intensive exploration of energy conversion strategies, expanded energy sources are successfully converted into electric energy, including mechanical energy from human motion, kinetic energy of falling raindrops, and thermal energy in the ambient. Among these energy conversion processes, charge transfer at different interfaces, such as solid-solid, solid-liquid, liquid-liquid, and gas-contained interfaces, dominates the power-generating efficiency. In this review, the mechanisms and applications of interfacial energy generators (IEGs) with different interface types are systematically summarized. Challenges and prospects are also highlighted. Due to the abundant interfacial interactions in nature, the development of IEGs offers a promising avenue of inexhaustible and environmental-friendly power generation to solve the energy crisis.

Piezoelectric dressings for advanced wound healing

The treatment of chronic refractory wounds poses significant challenges and threats to both human society and the economy. Existing research studies demonstrate that electrical stimulation fosters cell proliferation and migration and promotes the production of cytokines that expedites the wound healing process. Presently, clinical settings utilize electrical stimulation devices for wound treatment, but these devices often present issues such as limited portability and the necessity for frequent recharging. A cutting-edge wound dressing employing the piezoelectric effect could transform mechanical energy into electrical energy, thereby providing continuous electrical stimulation and accelerating wound healing, effectively addressing these concerns. This review primarily reviews the selection of piezoelectric materials and their application in wound dressing design, offering a succinct overview of these materials and their underlying mechanisms. This study also provides a perspective on the current limitations of piezoelectric wound dressings and the future development of multifunctional dressings harnessing the piezoelectric effect.

Advances in Smart Photovoltaic Textiles

Energy harvesting textiles have emerged as a promising solution to sustainably power wearable electronics. Textile-based solar cells (SCs) interconnected with on-body electronics have emerged to meet such needs. These technologies are lightweight, flexible, and easy to transport while leveraging the abundant natural sunlight in an eco-friendly way. In this Review, we comprehensively explore the working mechanisms, diverse types, and advanced fabrication strategies of photovoltaic textiles. Furthermore, we provide a detailed analysis of the recent progress made in various types of photovoltaic textiles, emphasizing their electrochemical performance. The focal point of this review centers on smart photovoltaic textiles for wearable electronic applications. Finally, we offer insights and perspectives on potential solutions to overcome the existing limitations of textile-based photovoltaics to promote their industrial commercialization.

Pyroelectric-Effect-Assisted Near-Infrared-Driven Photoelectrochemical Biosensor Based on Exponential DNA Amplifier for MicroRNA Detection

Although near-infrared responsive photoelectrochemical (PEC) biosensors have less damage to biological components compared to UV-visible light, they still reveal an inferior response due to the rapid recombination of photogenerated electron-hole. In this study, a near-infrared-driven PEC biosensor is fabricated for microRNA (miRNA) detection via integrating photoelectricity and pyroelectricity. Upon the introduction of target miRNA-21, the exponential DNA amplifier is triggered based on enzyme-assisted strand displacement amplification (SDA), releasing multiple Ag2S reporter probes to hybridize with capture probes immobilized on a CdS-2-mercaptobenzimidazole (2MBI)-modified photoelectrode. As a result, under the stimulation of NIR, the photoelectric conversion of Ag2S NPs generates the photocurrents. In addition, due to the strong hole acceptor ability of MBI, the pyroelectric effect of CdS-2MBI nanocomposites is enhanced, which generates highly pyroelectro-induced charge separation efficiency and induces the pyroelectric current benefited from the spontaneous polarization of CdS-2MBI caused by the temperature variation under the function of Ag2S nanoheaters. Impressively, this PEC biosensor has achieved the sensitive and selective determination of miRNA-21 with a detection limit as low as 54 fM. Overall, this NIR-driven PEC biosensor based on pyroelectric and photoelectric effects opens up a new horizon for bioanalysis and early disease diagnosis.

Thermoelectric coupling effect in BNT-BZT-xGaN pyroelectric ceramics for low-grade temperature-driven energy harvesting

Pyroelectric energy harvesting has received increasing attention due to its ability to convert low-grade waste heat into electricity. However, the low output energy density driven by low-grade temperature limits its practical applications. Here, we show a high-performance hybrid BNT-BZT-xGaN thermal energy harvesting system with environmentally friendly lead-free BNT-BZT pyroelectric matrix and high thermal conductivity GaN as dopant. The theoretical analysis of BNT-BZT and BNT-BZT-xGaN with x = 0.1 wt% suggests that the introduction of GaN facilitates the resonance vibration between Ga and Ti, O atoms, which not only contributes to the enhancement of the lattice heat conduction, but also improves the vibration of TiO6 octahedra, resulting in simultaneous improvement of thermal conductivity and pyroelectric coefficient. Therefore, a thermoelectric coupling enhanced energy harvesting density of 80 μJ cm-3 has been achieved in BNT-BZT-xGaN ceramics with x = 0.1 wt% driven by a temperature variation of 2 oC, at the optical load resistance of 600 MΩ.

Enhancement of a pyroelectric body energy harvesting scheme employing pulsed electric fields

This research utilizes waste heat energy as a sustainable energy source to enhance pyroelectric power output by combining pyroelectric nanogenerators with an external pulsed electric field. When the surface temperature of the pyroelectric body varies, applying different pulses of the external electric field results in maximum power accumulation. A novel power-generating experimental setup was developed to measure and compute pyroelectric power generation. A standard Fuji ceramic C-9 sample was used to generate pyroelectric energy in a 20 °C temperature range from 120 to 140 °C. The continuous temperature variation frequency was 0.05 Hz, and the pulsed electric field was applied when the temperature rose. Pulses of the electric field with widths of 10, 50, 100, and 200 ms were applied to the sample under different pulse amplitudes, and the amplitude of each pulse was 250, 500, 1000, or 1500 V/mm. The maximum power generated through the application of an external pulsed electric field under the above-mentioned conditions was evaluated. This system had the highest power density of 0.204 mJ cm-2 °C-1 kV-1. In addition, for the lowest input power, the maximum power generation condition was a 10 ms pulse width and an amplitude of 250 V mm-1 in the applied electric field. This state might power smart sensor modules, IoT devices, automobiles, and other waste heat energy applications. Nano-pulse electric field applications may reduce input power to its lowest level, dependent on net-producing power. Therefore, new researchers can use net-generation power efficiency to create a large-scale power source using multiple pyroelectric arrays.

Pyro-Phototronic Effect for Advanced Photodetectors and Novel Light Energy Harvesting

Pyroelectricity was discovered long ago and utilized to convert thermal energy that is tiny and usually wasted in daily life into useful electrical energy. The combination of pyroelectricity and optoelectronic yields a novel research field named as Pyro-Phototronic, where light-induced temperature variation of the pyroelectric material produces pyroelectric polarization charges at the interfaces of semiconductor optoelectronic devices, capable of modulating the device performances. In recent years, the pyro-phototronic effect has been vastly adopted and presents huge potential applications in functional optoelectronic devices. Here, we first introduce the basic concept and working mechanism of the pyro-phototronic effect and next summarize the recent progress of the pyro-phototronic effect in advanced photodetectors and light energy harvesting based on diverse materials with different dimensions. The coupling between the pyro-phototronic effect and the piezo-phototronic effect has also been reviewed. This review provides a comprehensive and conceptual summary of the pyro-phototronic effect and perspectives for pyro-phototronic-effect-based potential applications.

Technology Roadmap for Flexible Sensors

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.

Cellulose Nanocrystal-Based All-3D-Printed Pyro-Piezoelectric Nanogenerator for Hybrid Energy Harvesting and Self-Powered Cardiorespiratory Monitoring toward the Human-Machine Interface

Biomaterials with spontaneous piezoelectric property are highly emerging in recent times for the generation of electricity from mechanical energy sources that are amply available in nature. In this context, pyroelectricity, an integral property of piezoelectric materials, might be an interesting tool in harvesting thermal energy from the fluctuations of temperature. On the other hand, respiration and heart pulse are the significant human vital signs that can be used for early detection and prevention of cardiorespiratory diseases. Here, we report an all-three-dimensional (3D)-printed pyro-piezoelectric nanogenerator (Py-PNG) based on the most abundant and completely biodegradable biopolymer on earth, i.e., cellulose nanocrystal (CNC) for hybrid (mechanical as well as thermal) energy harvesting, and interestingly, the NG could be used as an e-skin sensor for application in self-powered noninvasive cardiorespiratory monitoring for personal healthcare. Notably, the CNC-based device will be biocompatible and economically advantageous due to its biomaterial-based supremacy and huge availability. This is an original approach with 3D geometrical advancement in designing a NG/sensor, where the unique all-3D-printed manner is adopted, and certainly, it has promising potential in reducing the number of processing steps to required equipment during the multilayer fabrication. The all-3D-printed NG/sensor shows outstanding mechano-thermal energy harvesting performance along with sensitivity and is capable of accurate detection of heart pulse as well as respiration, whenever and whichever required without the need of any battery or an external power supply. In addition, we have also extended its application in demonstrating a smart mask-based breath monitoring system. Thus, the real-time cardiorespiratory monitoring provides notable and fascinating information in medical diagnosis, stepping toward biomedical device development and human-machine interface.

Hybrid energy harvesting systems for self-powered sustainable water purification by harnessing ambient energy

The development of self-powered water purification technologies for decentralized applications is crucial for ensuring the provision of drinking water in resource-limited regions. The elimination of the dependence on external energy inputs and the attainment of self-powered status significantly expands the applicability of the treatment system in real-world scenarios. Hybrid energy harvesters, which convert multiple ambient energies simultaneously, show the potential to drive self-powered water purification facilities under fluctuating actual conditions. Here, we propose recent advancements in hybrid energy systems that simultaneously harvest various ambient energies (e.g., photo irradiation, flow kinetic, thermal, and vibration) to drive water purification processes. The mechanisms of various energy harvesters and point-of-use water purification treatments are first outlined. Then we summarize the hybrid energy harvesters that can drive water purification treatment. These hybrid energy harvesters are based on the mechanisms of mechanical and photovoltaic, mechanical and thermal, and thermal and photovoltaic effects. This review provides a comprehensive understanding of the potential for advancing beyond the current state-of-the-art of hybrid energy harvester-driven water treatment processes. Future endeavors should focus on improving catalyst efficiency and developing sustainable hybrid energy harvesters to drive self-powered treatments under unstable conditions (e.g., fluctuating temperatures and humidity).

Electroactive Biomaterials for Facilitating Bone Defect Repair under Pathological Conditions

Bone degeneration associated with various diseases is increasing due to rapid aging, sedentary lifestyles, and unhealthy diets. Living bone tissue has bioelectric properties critical to bone remodeling, and bone degeneration under various pathological conditions results in significant changes to these bioelectric properties. There is growing interest in utilizing biomimetic electroactive biomaterials that recapitulate the natural electrophysiological microenvironment of healthy bone tissue to promote bone repair. This review first summarizes the etiology of degenerative bone conditions associated with various diseases such as type II diabetes, osteoporosis, periodontitis, osteoarthritis, rheumatoid arthritis, osteomyelitis, and metastatic osteolysis. Next, the diverse array of natural and synthetic electroactive biomaterials with therapeutic potential are discussed. Putative mechanistic pathways by which electroactive biomaterials can mitigate bone degeneration are critically examined, including the enhancement of osteogenesis and angiogenesis, suppression of inflammation and osteoclastogenesis, as well as their anti-bacterial effects. Finally, the limited research on utilization of electroactive biomaterials in the treatment of bone degeneration associated with the aforementioned diseases are examined. Previous studies have mostly focused on using electroactive biomaterials to treat bone traumatic injuries. It is hoped that this review will encourage more research efforts on the use of electroactive biomaterials for treating degenerative bone conditions.

Liquid-liquid triboelectric nanogenerator based on the immiscible interface of an aqueous two-phase system

Solid nanogenerators often have limited charge transfer due to their low contact area. Liquid–liquid nanogenerators can transfer a charge better than the solid–solid and solid–liquid counterparts. However, the precise manipulation of the liquid morphology remains a challenge because of the fluidity limits of the liquid. In this work, using the surface tension of a droplet to fix its shape, a liquid-liquid triboelectric nanogenerator in Contact-Separation mode is designed using an immiscible aqueous-aqueous interface, achieving a contact surface charge transfer of 129 nC for a single droplet. The configuration is proven to be applicable in humid environments, and the two-phase materials have good biocompatibility and can be used as an effective drug carrier. Therefore, this nanogenerator is useful for designing future implantable devices. Meanwhile, this design also establishes the foundation of aqueous electronics, and additional applications can be achieved using this route.

While liquid-liquid interface offers better contact and charge transfer potential than solid-based counterparts, fluidity still poses challenges for their application. Here, authors show that charge transfer exists in aqueous two-phase systems and propose a nanogenerator design based on the immiscible aqueous-aqueous interface.

Gravure Printing for PVDF Thin-Film Pyroelectric Device Manufacture

Pyroelectric energy harvesting is one of the more recent and promising solid-state approaches for directly converting time-dependent temperature fluctuations into electric energy. Conventional printing technologies can offer many advantages for the production of pyroelectric thin-film-based devices, such as low cost, low temperature, the use of flexible substrates and shaping at the same time as deposition. Nevertheless, some issues related to low printed thickness and film-forming microstructure control need to be addressed. In this exploratory study, the possibility of exploiting the highly attractive gravure printing process for the potential industrial manufacture of flexible polyvinylidene fluoride (PVDF) thin-film pyroelectric devices was investigated. By the use of corona pre-treatment of the printing substrate and low-temperature polar solvent evaporation, multilayer gravure-printed PVDF pyroelectric devices were successfully manufactured for the first time, achieving a maximum generated current of 0.1 nA at 2.5 K/s from a device with an active area of 1 cm2. Considering the very low thermal inertia and performance scaling by the area expected for pyroelectric thin-film-based devices, combined with the upscaling potential of roll-to-roll gravure printing, our results provide new opportunities for on-demand, low-cost pyroelectric device manufacture and their integration in hybrid harvesters.

Applications of nanotechnology in smart textile industry: A critical review

Background

In recent years, nanotechnology has been playing an important role in designing smart fabrics. Nanomaterials have been employed to introduce in a sustainable manner, antimicrobial, ultraviolet resistant, electrically conductive, optical, hydrophobic and flame-retardant properties into textiles and garments. Nanomaterial based smart devices are now also being integrated with the textiles so as to perform various functions such as energy harvesting and storage, sensing, drug release and optics. These advancements have found wide applications in the fashion industry and are being developed for wider use in defence, healthcare and on-body energy harnessing applications.

Aim of review

The objective of this work is to provide an insight into the current trends of using nanotechnology in the modern textile industries and to inspire and anticipate further research in this field. This review provides an overview of the most current advances concerning on-body electronics research and the wonders which could be realized by nanomaterials in modern textiles in terms of total energy reliance on our clothes.

Key scientific concepts of review

The work underlines the various methods and techniques for the functionalization of nanomaterials and their integration into textiles with an emphasis on cost-effectiveness, comfort, wearability, energy conversion efficiency and eco-sustainability. The most recent trends of developing various nanogenerators, supercapacitors and photoelectronic devices on the fabric are highlighted, with special emphasis on the efficiency and wearability of the textile. The potential nanotoxicity associated with the processed textiles due to the tendency of these nanomaterials to leach into the environment along with possible remediation measures are also discussed. Finally, the future outlook regarding progress in the integration of smart nano-devices on textile fabrics is provided.

The effect of metal surface nanomorphology on the output performance of a TENG

In this work, the effect of charge density and nanomorphology of a metal tip on the output performance of a triboelectric nanogenerator (TENG) is studied. The basic working principle of the TENG is charge transfer after separation of a metal and a polymer. There are different charge densities on different kinds of metal surface nanomorphology, which significantly influences the output performance of the TENG. Copper samples with different nanomorphology were obtained by controlling pH value, current density, electrolyte concentration, and temperature during the electrodeposition of copper. The samples were characterized using XRD and SEM. The output performance of the TENG is closely related to the size, charge density distribution, and shape of the metal nanoparticles.

Pyroelectric Nanogenerator Based on an SbSI-TiO2 Nanocomposite

For the first time, a composite of ferroelectric antimony sulfoiodide (SbSI) nanowires and non-ferroelectric titanium dioxide (TiO₂) nanoparticles was applied as a pyroelectric nanogenerator. SbSI nanowires were fabricated under ultrasonic treatment. Sonochemical synthesis was performed in the presence of TiO₂ nanoparticles. The mean lateral dimension d_a = 68(2) nm and the length L_a = 2.52(7) µm of the SbSI nanowires were determined. TiO₂ nanoparticles served as binders in the synthesized nanocomposite, which allowed for the preparation of dense films via the simple drop-casting method. The SbSI–TiO₂ nanocomposite film was sandwiched between gold and indium tin oxide (ITO) electrodes. The Curie temperature of T_C = 294(2) K was evaluated and confirmed to be consistent with the data reported in the literature for ferroelectric SbSI. The SbSI–TiO₂ device was subjected to periodic thermal fluctuations. The measured pyroelectric signals were highly correlated with the temperature change waveforms. The magnitude of the pyroelectric current was found to be a linear function of the temperature change rate. The high value of the pyroelectric coefficient p = 264(7) nC/(cm²·K) was determined for the SbSI–TiO₂ nanocomposite. When the rate of temperature change was equal dT/dt = 62.5 mK/s, the maximum and average surface power densities of the SbSI–TiO₂ nanogenerator reached 8.39(2) and 2.57(2) µW/m², respectively.

Recent Advances in Self-Powered Piezoelectric and Triboelectric Sensors: From Material and Structure Design to Frontier Applications of Artificial Intelligence

The development of artificial intelligence and the Internet of things has motivated extensive research on self-powered flexible sensors. The conventional sensor must be powered by a battery device, while innovative self-powered sensors can provide power for the sensing device. Self-powered flexible sensors can have higher mobility, wider distribution, and even wireless operation, while solving the problem of the limited life of the battery so that it can be continuously operated and widely utilized. In recent years, the studies on piezoelectric nanogenerators (PENGs) and triboelectric nanogenerators (TENGs) have mainly concentrated on self-powered flexible sensors. Self-powered flexible sensors based on PENGs and TENGs have been reported as sensing devices in many application fields, such as human health monitoring, environmental monitoring, wearable devices, electronic skin, human–machine interfaces, robots, and intelligent transportation and cities. This review summarizes the development process of the sensor in terms of material design and structural optimization, as well as introduces its frontier applications in related fields. We also look forward to the development prospects and future of self-powered flexible sensors.

Recent progress of self-powered respiration monitoring systems

Wearable and implantable medical devices are playing more and more key roles in disease diagnosis and health management. Various biosensors and systems have been used for respiration monitoring. Among them, self-powered sensors have some special characteristics such as low-cost, easy preparation, highly designable, and diversified. The respiratory airflow can drive the self-powered sensors directly to convert mechanical energy of the airflow into electricity. One of the major goals of the self-powered sensors and systems is realizing health monitoring and diagnosis. The relationship between the output signals and the models of respiratory diseases has not been studied deeply and clearly. Therefore, how to find an accurate relationship between them is a challenging and significant research topic. This review summarized the recent progress of the self-powered respiratory sensors and systems from aspects of device principle, output property, detecting index and so on. The challenges and perspectives have also been discussed for reference to the researchers who are interested in the field of self-powered sensors.

Recent Advances in Pyroelectric Materials and Applications

As one important subclass of piezoelectric materials, pyroelectric materials have caused increasing attention owing to the unique pyroelectric effect induced by spontaneous polarization, showing broad promising application prospects due to various electrical responses induced by time-dependent temperature variation. This review systematically introduces the pyroelectric effect and evaluation of pyroelectric materials and follows by analyzing and concluding the novel properties corresponding to four kinds of main pyroelectric materials. The emphasis of this review focuses on several significant and practical applications of pyroelectric materials in thermal energy harvesting from the external environment, pyroelectric sensing, and imaging, even some electrochemical applications including hydrogen generation, wastewater treatment, sterilization, and disinfection. Finally, the development direction of pyroelectric materials, potential challenges and opportunities in the future are all discussed and proposed. Through systematical conclusion and analysis of the latest research progress in the recent two decades, this review may provide significant guide and inspiration in the development of pyroelectric materials.

Directional, Low-Energy Driven Thermal Actuating Bilayer Enabled by Coordinated Submolecular Switching

The authors reveal a thermal actuating bilayer that undergoes reversible deformation in response to low-energy thermal stimuli, for example, a few degrees of temperature increase. It is made of an aligned carbon nanotube (CNT) sheet covalently connected to a polymer layer in which dibenzocycloocta-1,5-diene (DBCOD) actuating units are oriented parallel to CNTs. Upon exposure to low-energy thermal stimulation, coordinated submolecular-level conformational changes of DBCODs result in macroscopic thermal contraction. This unique thermal contraction offers distinct advantages. It's inherently fast, repeatable, low-energy driven, and medium independent. The covalent interface and reversible nature of the conformational change bestow this bilayer with excellent repeatability, up to at least 70 000 cycles. Unlike conventional CNT bilayer systems, this system can achieve high precision actuation readily and can be scaled down to nanoscale. A new platform made of poly(vinylidene fluoride) (PVDF) in tandem with the bilayer can harvest low-grade thermal energy and convert it into electricity. The platform produces 86 times greater energy than PVDF alone upon exposure to 6 °C thermal fluctuations above room temperature. This platform provides a pathway to low-grade thermal energy harvesting. It also enables low-energy driven thermal artificial robotics, ultrasensitive thermal sensors, and remote controlled near infrared (NIR) driven actuators.

Emerging Energy Harvesting Materials and Devices for Self-Powered Water Disinfection

Contaminated drinking water is one of the main pathogen transmission pathways making waterborne illnesses such as diarrheal diseases and gastroenteritis a huge threat to public health, especially in the areas where sanitation facilities and gird power are inadequate such as rural and disaster hit areas. Self-powered water disinfection systems are a promising solution in these cases. In this review paper, the authors provide an overview of the new and emerging methods of applying energy harvesting materials and devices as a source of power for water disinfection systems microbial disinfection in water by harnessing ambient forms of energy such as mechanical motion, light, and heat into electricity. The authors begin with a brief introduction of the different energy harvesting technologies commonly applied in water disinfection; triboelectric, piezoelectric, pyroelectric, and photovoltaic effects. Various microbial disinfection mechanisms and types of device construction are summarized. Then, a detailed discussion of the energy harvester-driven water disinfection process is provided. Finally, challenges and perspectives regarding the future development of self-powered water disinfection are described.

Solar-induced hybrid energy harvesters for advanced oxidation water treatment

Water treatment based on advanced oxidation processes (AOPs) supplies clean water to rural areas lacking electric power supply and/or during natural disasters and pandemics. Considering the abundance of solar energy in the ambient environment, the solar-driven AOPs show an interesting potential to driving the water purification process. Involving the energy harvester (EH) that harvests mechanical or thermal energy into electricity to the solar-driven AOPs can achieve sustainable and self-powered water purification. Herein, we summarize the recent progress in the application of solar-induced hybrid EHs that harvest solar and mechanical/thermal energy simultaneously to drive AOP water treatment. A detailed discussion of the solar-induced hybrid EHs enabling AOP water treatment based on the mechanisms of piezo-, tribo-, pyro-, and thermo-assisted photocatalysis is provided. In addition, this paper explores future opportunities and strategies of the solar-induced hybrid EHs to drive the AOP water treatment in actual situations with unstable and fluctuating environmental conditions.

A Fully Biodegradable Ferroelectric Skin Sensor from Edible Porcine Skin Gelatine

High-performance biodegradable electronic devices are being investigated to address the global electronic waste problem. In this work, a fully biodegradable ferroelectric nanogenerator-driven skin sensor with ultrasensitive bimodal sensing capability based on edible porcine skin gelatine is demonstrated. The microstructure and molecular engineering of gelatine induces polarization confinement that gives rise the ferroelectric properties, resulting in a piezoelectric coefficient (d33) of ≈24 pC N-1 and pyroelectric coefficient of ≈13 µC m-2K-1, which are 6 and 11.8 times higher, respectively, than those of the conventional planar gelatine. The ferroelectric gelatine skin sensor has exceptionally high pressure sensitivity (≈41 mV Pa-1) and the lowest detection limit of pressure (≈0.005 Pa) and temperature (≈0.04 K) ever reported for ferroelectric sensors. In proof-of-concept tests, this device is able to sense the spatially resolved pressure, temperature, and surface texture of an unknown object, demonstrating potential for robotic skins and wearable electronics with zero waste footprint.

Applications of Ceramic/Graphene Composites and Hybrids

Research activity on ceramic/graphene composites and hybrids has increased dramatically in the last decade. In this review, we provide an overview of recent contributions involving ceramics, graphene, and graphene-related materials (GRM, i.e., graphene oxide, reduced graphene oxide, and graphene nanoplatelets) with a primary focus on applications. We have adopted a broad scope of the term ceramics, therefore including some applications of GRM with certain metal oxides and cement-based matrices in the review. Applications of ceramic/graphene hybrids and composites cover many different areas, in particular, energy production and storage (batteries, supercapacitors, solar and fuel cells), energy harvesting, sensors and biosensors, electromagnetic interference shielding, biomaterials, thermal management (heat dissipation and heat conduction functions), engineering components, catalysts, etc. A section on ceramic/GRM composites processed by additive manufacturing methods is included due to their industrial potential and waste reduction capability. All these applications of ceramic/graphene composites and hybrids are listed and mentioned in the present review, ending with the authors' outlook of those that seem most promising, based on the research efforts carried out in this field.

Hybridized Nanogenerators for Multifunctional Self-Powered Sensing: Principles, Prototypes, and Perspectives

Sensors are a key component of the Internet of Things (IoTs) to collect information of environments or objects. Considering the tremendous number and complex working conditions of sensors, multifunction and self-powered feathers are two basic requirements. Nanogenerators are a kind of devices based on the triboelectric, piezoelectric, or pyroelectric effects to harvest ambient energy and then converting to electricity. The hybridized nanogenerators that combined multiple effects in one device have great potential in multifunctional self-powered sensors because of the unique superiority such as generating electrical signals directly, responding to diverse stimuli, etc. This review aims at introducing the latest advancements of hybridized nanogenerators for multifunctional self-powered sensing. Firstly, the principles and sensor prototypes based on TENG are summarized. To avoid signal interference and energy insufficiently, the multifunctional self-powered sensors based on hybridized nanogenerators are reviewed. At last, the challenges and future development of multifunctional self-powered sensors have prospected.

Energy Harvesting and Pd(II) Sorption Based on Organic-Inorganic Hybrid Perovskites

Organic-inorganic hybrid perovskites are currently an active research topic in the field of energy and next-generation electronics. Their selectable organic and inorganic components provide infinite possibilities for designing functional materials with multiple applications. Herein, we present a new one-dimensional BaNiO₃-like organic-inorganic hybrid perovskite (thiazolidinium)CdBr₃ (1), which displays a phase transition at 263 K and a switchable second harmonic generation (SHG) response. Intriguingly, 1 shows a pyroelectric coefficient p_e of ∼0.6 μC·cm^-2·K^-1 and a piezoelectric output voltage of ∼2.0 V for our fabricated piezoelectric generation device, indicating its great potential for pyroelectric sensors, self-powered low-voltage electronic devices, and energy harvesters. Moreover, the presence of a specific thioether donor enables 1 to appropriately adsorb Pd(II) ions, which can be monitored by the corresponding change in phase transition behavior, SHG signal, and pyroelectric response. This work provides a new insight to develop new multifunctional materials, demonstrating the feasibility of utilizing organic-inorganic hybrid perovskites to realize future self-powered low-voltage devices and energy harvesters.