Perforated Pd Nanosheets with Crystalline/Amorphous Heterostructures as a Highly Active Robust Catalyst toward Formic Acid Oxidation

Ultra-Large Two-Dimensional Metal Nanowire Networks by Microfluidic Laminar Flow Synthesis for Formic Acid Electrooxidation

Despite the great research interest in two-dimensional metal nanowire networks (2D MNWNs) due to their large specific surface area and abundance of unsaturated coordination atoms, their controllable synthesis still remains a significant challenge. Herein, a microfluidics laminar flow-based approach is developed, enabling the facile preparation of large-scale 2D structures with diverse alloy compositions, such as PtBi, AuBi, PdBi, PtPdBi, and PtAuCu alloys. Remarkably, these 2D MNWNs can reach sizes up to submillimeter scale (~220 μm), which is significantly larger than the evolution from the 1D or 3D counterparts that typically measure only tens of nanometers. The PdBi 2D MNWNs affords the highest specific activity for formic acid (2669.1 mA mg-1) among current unsupported catalysts, which is 103.5 times higher than Pt-black, respectively. Furthermore, in situ Fourier transform infrared (FTIR) experiments provide comprehensive evidence that PdBi 2D MNWNs catalysts can effectively prevent CO* poisoning, resulting in exceptional activity and stability for the oxidation of formic acid.

Microwave heating-assisted synthesis of ultrathin platinum-based trimetallic nanosheets as highly stable catalysts towards oxygen reduction reaction in acidic medium

There are currently almost no ternary platinum-based nanosheets used for acidic oxygen reduction reactions (ORR) due to the difficulty in synthesizing ternary nanosheets with high Pt content. In this work, several ultrathin platinum-palladium-copper nanosheets (PtPdCu NSs) with a thickness of around 1.90 nm were prepared via a microwave heating-assisted method. Microwave heating allows a large number of Pt atoms to deposit into PdCu nanosheets, forming Pt-based ternary nanosheets with high Pt content. Among them, Pt38Pd50Cu12 NSs catalyst displays the highest mass activity (MA) measured in 0.1 M HClO4 of 0.932 A/mgPt+Pd which is 8.6 times of that Pt/C. Besides, Pt38Pd50Cu12 NSs catalyst also exhibits excellent stability with an extremely low MA attenuation after 80,000 cycles accelerated durability testing (ADT) tests. In the single cell tests, the Pt38Pd50Cu12 NSs catalyst manifests higher maximum power density of 796 mW cm-2 than Pt/C of 606 mW cm-2. Density functional theory (DFT) calculations indicate the weaker adsorption between Pt and O-species in Pt38Pd50Cu12 NSs leads to a significant enhancement of ORR activity. This study provides a new strategy to design and prepare ultrathin Pt-based trimetallic nanosheets as efficient and durable ORR catalysts.

DNA Framework-Templated Fabrication of Ultrathin Electroactive Gold Nanosheets

Generally, two-dimensional gold nanomaterials have unique properties and functions that offer exciting application prospects. However, the crystal phases of these materials tend to be limited to the thermodynamically stable crystal structure. Herein, we report a DNA framework-templated approach for the ambient aqueous synthesis of freestanding and microscale amorphous gold nanosheets with ultrathin sub-nanometer thickness. We observe that extended single-stranded DNA on DNA nanosheets can induce site-specific metallization and enable precise modification of the metalized nanostructures at predefined positions. More importantly, the as-prepared gold nanosheets can serve as an electrocatalyst for glucose oxidase-catalyzed aerobic oxidation, exhibiting enhanced electrocatalytic activity (~3-fold) relative to discrete gold nanoclusters owing to a larger electrochemical active area and wider band gap. The proposed DNA framework-templated metallization strategy is expected to be applicable in a broad range of fields, from catalysis to new energy materials.

A Coordination-Derived Cerium-Based Amorphous-Crystalline Heterostructure with High Electrocatalytic Oxygen Evolution Activity

The rational design of heterogeneous catalysts is crucial for achieving optimal physicochemical properties and high electrochemical activity. However, the development of new amorphous-crystalline heterostructures is significantly more challenging than that of the existing crystalline-crystalline heterostructures. To overcome these issues, a coordination-assisted strategy that can help fabricate an amorphous NiO/crystalline NiCeOx (a-NiO/c-NiCeOx ) heterostructure is reported herein. The coordination geometry of the organic ligands plays a pivotal role in permitting the formation of coordination polymers with high Ni contents. This consequently provides an opportunity for enabling the supersaturation of Ni in the NiCeOx structure during annealing, leading to the endogenous spillover of Ni from the depths of NiCeOx to its surface. The resulting heterostructure, featuring strongly coupled amorphous NiO and crystalline NiCeOx , exhibits harmonious interactions in addition to low overpotentials and high catalytic stability in the oxygen evolution reaction (OER). Theoretical calculations prove that the amorphous-crystalline interfaces facilitate charge transfer, which plays a critical role in regulating the local electron density of the Ni sites, thereby promoting the adsorption of oxygen-based intermediates on the Ni sites and lowering the dissociation-related energy barriers. Overall, this study underscores the potential of coordinating different metal ions at the molecular level to advance amorphous-crystalline heterostructure design.

Phase Engineering of Nanostructural Metallic Materials: Classification, Structures, and Applications

Metallic materials are usually composed of single phase or multiple phases, which refers to homogeneous regions with distinct types of the atom arrangement. The recent studies on nanostructured metallic materials provide a variety of promising approaches to engineer the phases at the nanoscale. Tailoring phase size, phase distribution, and introducing new structures via phase transformation contribute to the precise modification in deformation behaviors and electronic structures of nanostructural metallic materials. Therefore, phase engineering of nanostructured metallic materials is expected to pave an innovative way to develop materials with advanced mechanical and functional properties. In this review, we present a comprehensive overview of the engineering of heterogeneous nanophases and the fundamental understanding of nanophase formation for nanostructured metallic materials, including supra-nano-dual-phase materials, nanoprecipitation- and nanotwin-strengthened materials. We first review the thermodynamics and kinetics principles for the formation of the supra-nano-dual-phase structure, followed by a discussion on the deformation mechanism for structural metallic materials as well as the optimization in the electronic structure for electrocatalysis. Then, we demonstrate the origin, classification, and mechanical and functional properties of the metallic materials with the structural characteristics of dense nanoprecipitations or nanotwins. Finally, we summarize some potential research challenges in this field and provide a short perspective on the scientific implications of phase engineering for the design of next-generation advanced metallic materials.

The synthesis and application of crystalline-amorphous hybrid materials

Crystalline-amorphous hybrid materials (CA-HMs) possess the merits of both pure crystalline and amorphous phases. Abundant dangling bonds, unsaturated coordination atoms, and isotropic structural features in the amorphous phase, as well as relatively high electronic conductivity and thermodynamic structural stability of the crystalline phase simultaneously take effect in CA-HMs. Furthermore, the atomic and bandgap mismatch at the CA-HM interface can introduce more defects as extra active sites, reservoirs for promoted catalytic and electrochemical performance, and induce built-in electric field for facile charge carrier transport. Motivated by these intriguing features, herein, we provide a comprehensive overview of CA-HMs on various aspects-from synthetic methods to multiple applications. Typical characteristics of CA-HMs are discussed at the beginning, followed by representative synthetic strategies of CA-HMs, including hydrothermal/solvothermal methods, deposition techniques, thermal adjustment, and templating methods. Diverse applications of CA-HMs, such as electrocatalysis, batteries, supercapacitors, mechanics, optoelectronics, and thermoelectrics along with underlying structure-property mechanisms are carefully elucidated. Finally, challenges and perspectives of CA-HMs are proposed with an aim to provide insights into the future development of CA-HMs.

Synthesis and Prospects of Holey Two-dimensional Platinum-group Metals in Electrocatalysis

Advanced electrocatalysts can enable the widespread implementation of clean energy technologies. This paper reviews an emerging class of electrocatalytic materials comprising holey two-dimensional free-standing Pt-group metal (h-2D-PGM) nanosheets, which are categorically challenging to synthesize but inherently rich in all the qualities necessary to counter the kinetic and thermodynamic challenges of an electrochemical conversion process with high catalytic efficiency and stability. Although the 2D anisotropic growth of typical nonlayered metal crystals has succeeded and partly improved their atom-utilization efficiency, regularly distributed in-planar porosity can further optimize three critical factors that govern efficient electrocatalysis process: mass diffusion, electron transfer, and surface reactivity. However, producing such advanced morphological features within h-2D-PGMs is difficult unless they are specially engineered using approaches such as templating or kinetic ramification during 2D growth or controlled etching of preformed 2D-PGM solids. Therefore, this review highlighting the successful fabrication of various porous PGM nanosheets and their electrocatalytic benefits involving smart nanoscale features could inspire next-generation scientific and technological innovations toward securing a sustainable energy future.

Tensile-Strained Holey Pd Metallene toward Efficient and Stable Electrocatalysis

Noble metal-based metallenes are attracting intensive attention in energy catalysis, but it is still very challenging to precisely control the surface structures of metallenes for higher catalytic properties on account of their intrinsic thermodynamic instability. Herein, the synthesis of tensile-strained holey Pd metallene by oxidative etching is reported using hydrogen peroxide, which exhibits highly enhanced catalytic activity and stability in comparison with normal Pd metallene toward both oxygen reduction reaction and formic acid oxidation. The pre-prepared Pd metallene functions as a catalyst to decompose hydrogen peroxide, and the Pd atoms in amorphous regions of Pd metallene are preferentially removed by the introduced hydrogen peroxide during the etching process. The greatly enhanced ORR activity is mainly determined by the strong electrostatic repulsion between intermediate O* and the dopant O, which balances the adsorption strength of O* on Pd sites, ultimately endowing a weakened adsorption energy of O* on TH-Pd metallene. This work creates a facile and economical strategy to precisely shape metallene-based nanoarchitectures with broad applications for energy systems and sensing devices.

Selective edge etching of Pd metallene for enhanced formic acid electrooxidation

We develop a facile, selective edge etching strategy to create edge sites in Pd metallene using acetic acid. The created edge sites remarkably increase the electrochemically active surface area but reduce the charge transfer resistance, resulting in significant enhancement of catalytic activity and stability toward formic acid oxidation.

Polyethylenimine-Ethylenediamine-Induced Pd Metallene toward Alkaline Oxygen Reduction

Designing two-dimensional (2D) materials functionalized with organic molecules is an effective tactic to enhance catalytic performances for the oxygen reduction reaction (ORR). Herein, we synthesize Pd metallene with in situ modification of polyethylenimine-ethylenediamine (Pd@PEI-EDA metallene), in which PEI-EDA serves as both the structure-directing agent and modifier. Pd@PEI-EDA metallene has ample active sites and tuneable electronic structures due to ultrathin nanosheets with abundant wrinkles and interfacial structure. In contrast with commercial Pd/C and Pt/C, Pd@PEI-EDA metallene displays preferable catalytic ORR performance under alkaline conditions. This work offers an in situ interface engineering tactic for the preparation of 2D polymer-metal electrocatalysts to boost the ORR performance.

Nanoarchitectonics of Metallene Materials for Electrocatalysis

Controlling the synthesis of metal nanostructures is one approach for catalyst engineering and performance optimization in electrocatalysis. As an emerging class of unconventional electrocatalysts, two-dimensional (2D) metallene electrocatalysts with ultrathin sheet-like morphology have gained ever-growing attention and exhibited superior performance in electrocatalysis owing to their distinctive properties originating from structural anisotropy, rich surface chemistry, and efficient mass diffusion capability. Many significant advances in synthetic methods and electrocatalytic applications for 2D metallenes have been obtained in recent years. Therefore, an in-depth review summarizing the progress in developing 2D metallenes for electrochemical applications is highly needed. Unlike most reported reviews on the 2D metallenes, this review starts by introducing the preparation of 2D metallenes based on the classification of the metals (e.g., noble metals, and non-noble metals) instead of synthetic methods. Some typical strategies for preparing each kind of metal are enumerated in detail. Then, the utilization of 2D metallenes in electrocatalytic applications, especially in the electrocatalytic conversion reactions, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, fuel oxidation reaction, CO₂ reduction reaction, and N₂ reduction reaction, are comprehensively discussed. Finally, current challenges and opportunities for future research on metallenes in electrochemical energy conversion are proposed.

Modulate the metallic Sb state on ultrathin PdSb-based nanosheets for efficient formic acid electrooxidation

Incorporation of oxophilic metals into Pd-based nanostructures has shown great potential in small molecule electrooxidation owing to their superior anti-poisoning capability. However, engineering the electronic structure of oxophilic dopants in Pd-based catalysts remains challenging and their impact on electrooxidation reactions is rarely demonstrated. Herein, we have developed a method for synthesizing PdSb-based nanosheets, enabling the incorporation of the Sb element in a predominantly metallic state despite its high oxophilic nature. Moreover, the Pd₉₀Sb₇W₃ nanosheet serves as an efficient electrocatalyst for the formic acid oxidation reaction (FAOR), and the underlying promotion mechanism is investigated. Among the as-prepared PdSb-based nanosheets, the Pd₉₀Sb₇W₃ nanosheet exhibits a remarkable 69.03% metallic state of Sb, surpassing the values observed for the Pd₈₆Sb₁₂W₂ (33.01%) and Pd₈₃Sb₁₄W₃ (25.41%) nanosheets. X-ray photoelectron spectroscopy (XPS) and CO stripping experiments confirm that the Sb metallic state contributes the synergistic effect of their electronic and oxophilic effect, thus leading to an effective electrooxidation removal of CO and significantly enhanced FAOR electrocatalytic activity (1.47 A mg^-1; 2.32 mA cm^-1) compared with the oxidated state of Sb. This work highlights the importance of modulating the chemical valence state of oxophilic metals to enhance electrocatalytic performance, offering valuable insights for the design of high-performance electrocatalysts for electrooxidation of small molecules.

Wet-chemistry synthesis of two-dimensional Pt- and Pd-based intermetallic electrocatalysts for fuel cells

Two-dimensional (2D) noble-metal-based nanomaterials have attracted tremendous attention and have widespread promising applications as a result of their unique physical, chemical, and electronic properties. Especially, 2D Pt- and Pd-based intermetallic nanoplates (IMNPs) and nanosheets (IMNSs) are widely studied for fuel cell (FC)-related reactions, including the cathodic oxygen reduction reaction (ORR) and anodic formic acid, methanol and ethanol oxidation reactions (FAOR, MOR and EOR). Wet-chemistry synthesis is a powerful strategy to prepare metallic nanocrystals with well-controlled dispersity, size, and composition. In this review, a fundamental understanding of the FC-related reactions is firstly elaborated. Subsequently, the current wet-chemistry synthesis pathways for 2D Pt- and Pd-based IMNPs and IMNSs are briefly summarized, as well as their electrocatalytic applications including in the ORR, FAOR, MOR, and EOR. Finally, we provide an overview of the opportunities and current challenges and give our perspectives on the development of high-performance 2D Pt- and Pd-based intermetallic electrocatalysts towards FCs. We hope this review offers timely information on the synthesis of 2D Pt- and Pd-based IMNPs and IMNSs and provides guidance for the efficient synthesis and application of them.

Single Cobalt Atoms Immobilized on Palladium-Based Nanosheets as 2D Single-Atom Alloy for Efficient Hydrogen Evolution Reaction

Single-atom alloys (SAAs) display excellent electrocatalytic performance by overcoming the scaling relationships in alloys. However, due to the lack of a unique structure engineering design, it is difficult to obtain SAAs with a high specific surface area to expose more active sites. Herein, single Co atoms are immobilized on Pd metallene (Pdm) support to obtain Co/Pdm through the design of the engineered morphology of Pd, realizing the preparation of ultra-thin 2D SAA. The unsaturated coordination environments combined with the unique geometric and electronic structures realize the modulation of the d-band center and the redistribution of charges, generating highly active electronic states on the surface of Co/Pdm. Benefiting from the synergistic interaction and spillover effect, the Co/Pdm electrocatalyst exhibits outstanding hydrogen evolution reaction (HER) performance in both acid and alkaline solutions, especially with a Tafel slope of 8.2 mV dec^-1 and a low overpotential of 24.7 mV at 10 mA cm^-2 in the acidic medium, which outperforms commercial Pt/C and Pd/C. This work highlights the successful preparation of 2D ultra-thin SAA, which provides a new strategy for the preparation of HER electrocatalyst with high efficiency, activity, and stability.

Research Advances in Amorphous-Crystalline Heterostructures Toward Efficient Electrochemical Applications

Interface engineering of heterostructures has proven a promising strategy to effectively modulate their physicochemical properties and further improve the electrochemical performance for various applications. In this context related research of the newly proposed amorphous-crystalline heterostructures have lately surged since they combine the superior advantages of amorphous- and crystalline-phase structures, showing unusual atomic arrangements in heterointerfaces. Nonetheless, there has been much less efforts in systematic analysis and summary of the amorphous-crystalline heterostructures to examine their complicated interfacial interactions and elusory active sites. The critical structure-activity correlation and electrocatalytic mechanism remain rather elusive. In this review, the recent advances of amorphous-crystalline heterostructures in electrochemical energy conversion and storage fields are amply discussed and presented, along with remarks on the challenges and perspectives. Initially, the fundamental characteristics of amorphous-crystalline heterostructures are introduced to provide scientific viewpoints for structural understanding. Subsequently, the superiorities and current achievements of amorphous-crystalline heterostructures as highly efficient electrocatalysts/electrodes for hydrogen evolution reaction, oxygen evolution reaction, supercapacitor, lithium-ion battery, and lithium-sulfur battery applications are elaborated. At the end of this review, future outlooks and opportunities on amorphous-crystalline heterostructures are also put forward to promote their further development and application in the field of clean energy.

Two-Dimensional Metal Nanostructures: From Theoretical Understanding to Experiment

This paper reviews recent studies on the preparation of two-dimensional (2D) metal nanostructures, particularly nanosheets. As metal often exists in the high-symmetry crystal phase, such as face centered cubic structures, reducing the symmetry is often needed for the formation of low-dimensional nanostructures. Recent advances in characterization and theory allow for a deeper understanding of the formation of 2D nanostructures. This Review firstly describes the relevant theoretical framework to help the experimentalists understand chemical driving forces for the synthesis of 2D metal nanostructures, followed by examples on the shape control of different metals. Recent applications of 2D metal nanostructures, including catalysis, bioimaging, plasmonics, and sensing, are discussed. We end the Review with a summary and outlook of the challenges and opportunities in the design, synthesis, and application of 2D metal nanostructures.

Hollow Heterostructured Nanocatalysts for Boosting Electrocatalytic Water Splitting

The implementation of electrochemical water splitting demands the development and application of electrocatalysts to overcome sluggish reaction kinetics of hydrogen/oxygen evolution reaction (HER/OER). Hollow nanostructures, particularly for hollow heterostructured nanomaterials can provide multiple solutions to accelerate the HER/OER kinetics owing to their advantageous merit. Herein, the recent advances of hollow heterostructured nanocatalysts and their excellent performance for water splitting are systematically summarized. Starting by illustrating the intrinsically advantageous features of hollow heterostructures, achievements in engineering hollow heterostructured electrocatalysts are also highlighted with the focus on structural design, interfacial engineering, composition regulation, and catalytic evaluation. Finally, some perspective insights and future challenges of hollow heterostructured nanocatalysts for electrocatalytic water splitting are also discussed.

Pd-Based Metallenes for Fuel Cell Reactions

Pd-based metallenes, atomically thin layers composed primarily of under-coordinated Pd atoms, have emerged as the newest members in the family of two-dimensional (2D) nanomaterials. Moreover, the unique physiochemical properties, high intrinsic activity associated with metallenes coupled with the ease of applying chemical modifications result in great potential in catalyst engineering for fuel cell reactions. Especially in recent years, interest in Pd-based metallenes is growing, as evidenced by surge in available literatures. Herein, we have reviewed the recent findings achieved in Pd-based metallenes in fuel cells by highlighting the technologies available for deriving metallenes and manifesting the modification strategies for designing them to better suit the application demand. Moreover, we also discuss the perspective insights of Pd-based metallenes for fuel cells regarding the surfactant-free synthesis method, strain engineering, constructing high-entropy alloy, and so on.

Pd Metallene Aerogels with Single-Atom W Doping for Selective Ethanol Oxidation

The development of advanced electrocatalysts with satisfactory C1 pathway selectivity for the ethanol oxidation reaction (EOR) is critical. Herein, a bubbling CO-induced gelation method is developed in acetic acid at 50 °C to construct single-atom W-doped Pd metallene aerogels (denoted as SA W-Pd MAs) within 1 h. In light of the metallene structural advantages of noble metal aerogels and single-atom W decoration, the resultant SA W-Pd MAs exhibit an outstanding EOR performance with high C1 pathway selectivity. Density functional theory calculations validate that the SA W-Pd MAs greatly improve the formation of the CH₃O intermediate and the transformation of poisonous CO species to CO₂, thus resulting in high C1 pathway selectivity. Therefore, this work not only offers an effective gelation method to fabricate noble metal aerogels with atomic-scale building blocks but also presents guidance to develop high-efficiency EOR electrocatalysts.

Low Pt-Doped Crystalline/Amorphous Heterophase Pd12P3.2 Nanowires as Efficient Catalysts for Methanol Oxidation

Pd-based catalysts are attractive anodic electrocatalysts for direct methanol fuel cells owing to their low cost and natural abundance. However, they suffer from sluggish reaction kinetic and insufficient electroactivity in methanol oxidation reaction (MOR). In this work, we developed a facile one-pot approach to fabricate low Pt-doped Pd₁₂P_3.2 nanowires with crystalline/amorphous heterophase (termed Pt-Pd₁₂P_3.2 NWs) for MOR. The unique crystalline/amorphous heterophase structures promote the catalytic activity by the plentiful active sites at the phase boundaries and/or interfaces and the synergistic effect between different phases. Moreover, the incorporation of trace Pt into Pd lattices modifies the electronic structure and improves the electron transfer ability. Therefore, the obtained Pt-Pd₁₂P_3.2 NWs display significantly enhanced electrocatalytic performance toward MOR with the mass activity of 2.35 A mg_Pd+Pt^-1, which is 9.0, 2.9, and 2.0 times higher than those of the commercial Pd/C (0.26 A mg_Pd^-1), Pd₁₂P_3.2 NWs (0.82 A mg_Pd^-1), and commercial Pt/C (1.19 A mg_Pt^-1). The high mass activity enables the Pt-Pd₁₂P_3.2 NWs to be the promising Pd-based catalysts for MOR.

Recent advances in fuel cell reaction electrocatalysis based on porous noble metal nanocatalysts

As the center of fuel cells, electrocatalysts play a crucial role in determining the conversion efficiency from chemical energy to electrical energy. Therefore, the development of advanced electrocatalysts with both high activity and stability is significant but challenging. Active site, mass transport, and charge transfer are three central factors influencing the catalytic performance of electrocatalysts. Endowed with rich available surface active sites, facilitated electron transfer and mass diffusion channels, and highly active components, porous noble metal nanomaterials are widely considered as promising electrocatalysts toward fuel cell-related reactions. The past decade has witnessed great achievements in the design and fabrication of advanced porous noble metal nanocatalysts in the field of electrocatalytic fuel oxidation reaction (FOR) and oxygen reduction reaction (ORR). Herein, the recent research advances regarding porous noble metal nanocatalysts for fuel cell-related reactions are reviewed. In the discussions, the inherent structural features of porous noble metal nanostructures for electrocatalytic reactions, advanced synthetic strategies for the fabrication of porous noble metal nanostructures, and the structure-performance relationships are also provided.

Controllable Synthesis of Web-Footed PdCu Nanosheets and Their Electrocatalytic Applications

Morphological control of noble-metal-based nanocrystals has attracted enormous attention because their catalytic behaviors can be optimized well by adjusting the size and shape. Herein, the controllable synthesis of web-footed PdCu nanosheets via a facile surfactant-free method is reported. It is discovered that the Cu(II) precursor in this synthetic system displays a critical role in growing branches along the lateral of nanosheets. This work demonstrates a Pd-based alloy nanoarchitecture for efficient and stable electrocatalysis of both ethanal and formic acid oxidation reactions.

Palladium Nanosheet-Based Dual Gas Sensors for Sensitive Room-Temperature Hydrogen and Carbon Monoxide Detection

Palladium has long been explored for use in gas sensors because of its excellent catalytic properties and its unique property of forming hydrides in the presence of H₂. However, pure Pd-based sensors usually suffer from low response and a relatively high limit of detection. Palladium nanosheets (PdNS) are of particular interest for gas sensing applications due to their high surface area and excellent electrical conductivity. Here, we demonstrate the design and fabrication of low-cost PdNS-based dual gas sensors for room-temperature detection of H₂ and CO over a wide concentration range. We fabricated sensors using multiwalled carbon nanotube@PdNS (MWCNT@PdNS) composites and compared their performance against pure PdNS devices for hydrogen sensing based on electrical resistive response. Devices using PdNS alone had a response and response time of 0.4% and 50 s, respectively, to 1% H₂ in air. MWCNT@PdNS (1:5 mass ratio) showed enhanced performance at a lower hydrogen concentration with a limit of detection (LOD_H2) of 5 ppm. Nearly an order of magnitude increase in response was observed on increasing the amount of MWCNT to 50 mass % in the nanocomposite, but the response fell off at low H₂ concentration. Overall, these PdNS-based sensors were found to show good repeatability, stability, and performance under humid conditions. Their response was selective for H₂ versus CH₄, CO₂, and NH₃; the response to CO was comparable in magnitude but opposite in sign to the response to H₂. Upon simultaneous exposure to equal concentrations (10 ppm each) of H₂ and CO, the response to CO was dominant. The PdNS showed high sensitivity to CO, detecting as little as 1 ppm CO in air at room temperature. The sensitivity to CO could be used either in a stand-alone room-temperature CO detector, where H₂ is known not to be present, or in combination with CO and combustible gas detectors to distinguish H₂ from other combustible gases.

Facile Synthesis of Pd and PdPtNi Trimetallic Nanosheets as Enhanced Oxygen Reduction Electrocatalysts

While bimetallic 2D metallic nanomaterials are widely synthesized and used as electrocatalysts with enhanced performance, trimetallic 2D structures are less commonly reported. In this work, a facile wet chemical method for synthesizing Pd nanosheets and PdPtNi trimetallic alloy nanosheets is developed. Without the introduction of gaseous CO and pressurized equipment, Pd nanosheets with a thickness of ≈2.85 nm and sizes in the range of 1-2 µm can be obtained. The facile synthesis conditions allow for a comprehensive study of the nanosheet growth mechanism. It is found that 2D growth is closely related to the product of solvent decomposition and the additive ligand diethylenetriamine. Further, by depositing Pt and Ni onto the Pd nanosheets, trimetallic nanosheets with tunable compositions can be obtained and applied as oxygen reduction reaction electrocatalysts. Typically, the Pd₉ Pt₁ Ni₁ nanosheets have the highest half-wave potential of 0.928 V (vs reversible hydrogen electrode), which is 34 mV higher than that of commercial Pt/C and 28 mV higher than that of Pd/C, and also have high durability.

Facile synthesis of low-dimensional PdPt nanocrystals for high-performance electrooxidation of C 2 alcohols

Low-dimensional noble-metal materials (LDNMs) with different structural advantages have been considered as the high-performance catalysts for C2 alcohol electrooxidation. However, it is still a great challenging to precisely construct nanomaterials with low-dimensional composite structure thus to take advantages of various dimension, especial without the surfactant participation. Most studies focus on the modulation of the single dimensional nanocatalysts, the correlation between electrocatalytic performances and low-dimension composite have been rarely reported. Herein, we engineered a simple one-step approach to design multi-low-dimensional PdPt nanomaterials by using different Pd precursors. The low-dimensional PdPt nanocrystals (NCs) composed of zero dimension (0D) dendrite-like nanoparticles and two dimension (2D) nanosheets were obtained by using Pd(OAc)₂, and meanwhile the 2D PdPt nanosheet assemblies (NAs) were synthesized by the introduction of NaPdCl₄. Specifically, benefitting from the unique low-dimension structures with fast electron/mass transfer, and optimized electronic and synergistic effect, the multi-low-dimensional 0D-2D PdPt NCs showed the highest ethanol oxidation reaction (EOR)/ethylene glycol oxidation reaction (EGOR) mass activities, which were much higher than 2D PdPt NAs. The 0D-2D PdPt NCs also exhibited the highest structural stability. Generally, this work could inspire more advanced designs for surfactant-free synthesis and promote the fundamental engineering on nanocatalysts with low-dimension composite structure for electrocatalytic fields.

Carbonaceous Hosts for Sulfur Cathode in Alkali-Metal/S (Alkali Metal = Lithium, Sodium, Potassium) Batteries

Alkali-metal/sulfur batteries hold great promise for offering relatively high energy density compared to conventional lithium-ion batteries. By providing viable sulfur composites that can be effectively used, carbonaceous hosts as a key component play critical roles in overcoming the preliminary challenges associated with the insulating sulfur and its relatively soluble polysulfides. Herein, a comprehensive overview and recent progress on carbonaceous hosts for advanced next-generation alkali-metal/sulfur batteries are presented. In order to encapsulate the highly active sulfur mass and fully limit polysulfide dissolution, strategies for tailoring the design and synthesis of carbonaceous hosts are summarized in this work. The sticking points that remain for sulfur cathodes in current alkali-metal/sulfur systems and the future remedies that can be provided by carbonaceous hosts are also indicated, which can lead to long cycling lifetimes and highly reversible capacities under repeated sulfur reduction reactions in alkali-metal/sulfur during cycling.

Recent progress in water-splitting electrocatalysis mediated by 2D noble metal materials

Two-dimensional (2D) nanostructures have enabled noble-metal-based nanomaterials to be promising electrocatalysts toward overall water splitting due to their inherent structural advantages, including a high specific surface active area, numerous low-coordinated atoms, and a high density of defects and edges. Moreover, it is also disclosed that the electronic effect and strain effect within 2D nanostructures also benefit the further promotion of the electrocatalytic performance. In this review, we have focused on the recent progress in the fabrication of advanced electrocatalysts based on 2D noble-metal-based nanomaterials toward water splitting electrocatalysis. First, fundamental descriptions about water-splitting mechanisms, some promising engineering strategies, and major challenges in electrochemical water splitting are given. Then, the structural merits of 2D nanostructures for water splitting electrocatalysis are also highlighted, including abundant surface active sites, lattice distortion, abundant surface defects, electronic effects, and strain effects. Additionally, some representative water-splitting electrocatalysts have been discussed in detail to highlight the superiorities of 2D noble-metal-based nanomaterials for electrochemical water splitting. Finally, the underlying challenges and future opportunities for the fabrication of more advanced electrocatalysts for water splitting are also highlighted. We hope that this review article provides guidance for the fabrication of more efficient electrocatalysts for boosting industrial hydrogen production via water splitting.

Carbon-Supported Single-Atom Catalysts for Formic Acid Oxidation and Oxygen Reduction Reactions

The commercialization of fuel cells, especially for direct formic acid fuel cells (DFAFCs) and proton-exchange membrane fuel cells (PEMFCs), is significantly restrained by the high cost, poor stability, and sluggish kinetics of platinum group metals (PGM) catalysts for both the anodic formic acid oxidation reaction (FAOR) and the cathodic oxygen reduction reaction (ORR). Currently, it has confronted with challenges, including exploring highly active, cost-effective, and stable catalysts to replace PGM for DFAFCs and PEMFCs. Recently, the increasing investigation has been focused on the single-atom catalysts (SACs) to enhance the catalytic performance owing to the maximum atom utilization and highly exposed active sites. The aim of this review is to present the recent research activities on carbon supported SACs. At the beginning of the review, metal-based SACs supported on different carbon supports, and the typical characterization methods are introduced. Subsequently, recent advances in metal-based SACs for FAOR and ORR catalysis are scientifically summarized. Particularly, some representative metal-based SACs for ORR activity are further exemplified with a deeper understanding of structure-activity relationships. Finally, the challenges and opportunities of SACs are prospected, such as the mechanism understanding and commercial applications.

Highly Dispersed Mo Sites on Pd Nanosheets Enable Selective Ethanol-to-Acetate Conversion

The fermentation of biomass allows for the generation of major renewable ethanol biofuel that has high energy density favorable for direct alcohol fuel cells in alkaline media. However, selective conversion of ethanol to either CO₂ or acetate remains a great challenge. Especially, the ethanol-to-acetate route usually demonstrates decentoxidation current density relative to the ethanol-to-CO₂ route that contains strongly adsorbed poisons. This makes the total oxidation of ethanol to CO₂ unnecessary. Here, we present a highly active ethanol oxidation electrocatalyst that was prepared by in situ decorating highly dispersed Mo sites on Pd nanosheets (MoO_x/Pd) via a surfactant-free and facile route. We found that ∼2 atom % of Mo on Pd nanosheets increases the current density to 3.8 A mg_Pd^-1, around 2 times more active relative to the undecorated Pd nanosheets, achieving nearly 100% faradic efficiency for the ethanol-to-acetate conversion in an alkaline electrolyte without the generation of detectable CO₂, evidenced by in situ electrochemical infrared spectroscopy, nuclear magnetic resonance, and ion chromatography. The selective and CO₂-free conversion offers a promising strategy through alcohol fuel cells for contributing comparable current density to power electrical equipment while for selective oxidation of biofuels to useful acetate intermediate for the chemical industry.

Recent Progress of Ultrathin 2D Pd-Based Nanomaterials for Fuel Cell Electrocatalysis

Pd- and Pd-based catalysts have emerged as potential alternatives to Pt- and Pt-based catalysts for numerous electrocatalytic reactions, particularly fuel cell-related reactions, including the anodic fuel oxidation reaction (FOR) and cathodic oxygen reduction reaction (ORR). The creation of Pd- and Pd-based architectures with large surface areas, numerous low-coordinated atoms, and high density of defects and edges is the most promising strategy for improving the electrocatalytic performance of fuel cells. Recently, 2D Pd-based nanomaterials with single or few atom thickness have attracted increasing interest as potential candidates for both the ORR and FOR, owing to their remarkable advantages, including high intrinsic activity, high electron mobility, and straightforward surface functionalization. In this review, the recent advances in 2D Pd-based nanomaterials for the FOR and ORR are summarized. A fundamental understanding of the FOR and ORR is elaborated. Subsequently, the advantages and latest advances in 2D Pd-based nanomaterials for the FOR and ORR are scientifically and systematically summarized. A systematic discussion of the synthesis methods is also included which should guide researchers toward more efficient 2D Pd-based electrocatalysts. Lastly, the future outlook and trends in the development of 2D Pd-based nanomaterials toward fuel cell development are also presented.

Recent advances in formic acid electro-oxidation: from the fundamental mechanism to electrocatalysts

Direct formic acid fuel cells have attracted significant attention because of their low fuel crossover, high safety, and high theoretical power density among all the proton-exchange membrane fuel cells. Much effort has been devoted to the study of formic acid oxidation, including the reaction processes and electrocatalysts. However, as a model reaction, the anodic electro-oxidation process of formic acid is still not very clear, especially regarding the confirmation of the intermediates, which is not helpful for the design and synthesis of high-performance electrocatalysts for formic acid oxidation or conducive to understanding the reaction mechanisms of other small fuel molecules. Herein, we briefly review the recent advances in investigating the mechanism of formic acid electro-oxidation and the basic design concepts of formic acid oxidation electrocatalysts. Rather than an exhaustive overview of all aspects of this topic, this mini-review mainly outlines the progress of this field in recent years.

Oxidation Etching-Induced Post-Crystallization of Palladium Nanosheets for Efficient Catalytic Hydrogenation

The performances of catalysts are highly dependent on their crystallinities. It is a significant challenge to successively manipulate the crystallinities of noble metal nanocatalysts due to the strong metallic bonds, especially under ambient conditions. Herein, a post-crystallization approach is developed for successive control of the crystallinity of Pd nanosheets via selective oxidation etching of the amorphous domains. This strategy can be extended to crystallize other Pd and Ru nanomaterials. By carefully modulating the crystallinity of Pd nanosheets, the time for the complete conversion of 4-nitrostyrene via hydrogenation is reduced by 20 times. Also, crystallization can turn the selectivity of the products and improve the stability of Pd nanosheets. These findings may advance the crystal engineering of metal nanomaterials for wide applications.

Engineering the morphology of palladium nanostructures to tune their electrocatalytic activity in formic acid oxidation reactions

Pd nanomaterials can be cheaper alternative catalysts for the electrocatalytic formic acid oxidation reaction (FAOR) in fuel cells. The size and shape of the nanoparticles and crystal engineering can play a crucial role in enhancing the catalytic activities of Pd nanostructures. A systematic study on the effect of varying the morphology of Pd nanostructures on their catalytic activities for FAOR is reported here. Palladium nanoparticles (Pd_0D), nanowires (Pd_1D) and nanosheets (Pd_2D) could be synthesized by using swollen liquid crystals as 'soft' templates. Swollen liquid crystals are lyotropic liquid crystals that are formed from a quaternary mixture of a surfactant, cosurfactant, brine and Pd salt dissolved in oil. Pd_1D nanostructures exhibited 2.7 and 19 fold higher current density than Pd_0D and Pd_2D nanostructures in the FAOR. The Pd_1D nanostructure possess higher electrochemically active surface area (ECSA), better catalytic activity, stability, and lower impedance to charge transfer when compared to the Pd_0D and Pd_2D nanostructures. The presence of relatively higher amounts of crystal defects and enriched (100) crystal facets in the Pd_1D nanostructure were found to be the reasons for their enhanced catalytic activities.

Hierarchical defective palladium-silver alloy nanosheets for ethanol electrooxidation

Tuning the chemical composition and surface structure of electrodes is demonstrated as a feasible and effective strategy to tailor advanced catalysts for energy electrocatalysis. In this work, hierarchical palladium-silver alloy nanosheets (PdAg NS) with the thickness ~7 atoms and rich atomic defects are successfully prepared, using the carbon monoxide (CO) confinement approach. The optimized Pd₇Ag₃ NS/C exhibits 8.8 times higher catalytic peak current density and much better stability toward ethanol electrooxidation than Pd NS/C catalyst. The catalytic enhancement mechanism could be attributed to the synergetic effects among optimized electronic structure of Pd, novel architecture, and rich atomic defects.

Rhodium/graphitic-carbon-nitride composite electrocatalyst facilitates efficient hydrogen evolution in acidic and alkaline electrolytes

Exploring the highly efficient and durable electrocatalysts for hydrogen evolution reaction (HER) is vitally necessary for sustainable energy conversion and storage system. Herein, we fabricate an interfacial engineered Rh-carbon nitride as advanced electrocatalysts for HER in the acidic and alkaline electrolytes. The interface between Rh nanocrystals and carbon nitride may adjust the electronic structure of Rh, which results in high activity for HER. The optimal Rh-carbon nitride shows low overpotential at current density of -10 mA·cm^-2 and small Tafel slope (13 mV and 25.0 mV dec^-1 in 0.5 M H₂SO₄, 46 mV and 42.0 mV dec^-1 in 1.0 M KOH, respectively), which is superior to that of commercial Pt/C (21 mV and 28.5 mV dec^-1 in 0.5 M H₂SO₄, 55 mV and 44.0 mV dec^-1 in 1.0 M KOH, respectively). Importantly, this composite also exhibits long-term stability in 0.5 M H₂SO₄ and 1.0 M KOH. The excellent HER performances can be attribute to the interface between Rh and carbon nitride, which downshifts their d-band center positions, tuning the adsorption ability for hydrogen and accelerating the HER kinetics. This work may open up an efficient method to design metal/carbon hybrid for electrocatalysis.

Anchoring nanosized Pd on three-dimensional boron- and nitrogen-codoped graphene aerogels as a highly active multifunctional electrocatalyst for formic acid and methanol oxidation reactions

A facile and scalable strategy is developed for the preparation of nanosized Pd crystals anchored on 3D B- and N-codoped graphene aerogels, which show multifunctional electrocatalytic ability.