Highly Efficient Ionic Photocurrent Generation through WS2 -Based 2D Nanofluidic Channels

Ion transport in nanofluidics under external fields

Nanofluidic channels with tailored ion transport dynamics are usually used as channels for ion transport, to enable high-performance ion regulation behaviors. The rational construction of nanofluidics and the introduction of external fields are of vital significance to the advancement and development of these ion transport properties. Focusing on the recent advances of nanofluidics, in this review, various dimensional nanomaterials and their derived homogeneous/heterogeneous nanofluidics are first briefly introduced. Then we discuss the basic principles and properties of ion transport in nanofluidics. As the major part of this review, we focus on recent progress in ion transport in nanofluidics regulated by external physical fields (electric field, light, heat, pressure, etc.) and chemical fields (pH, concentration gradient, chemical reaction, etc.), and reveal the advantages and ion regulation mechanisms of each type. Moreover, the representative applications of these nanofluidic channels in sensing, ionic devices, energy conversion, and other areas are summarized. Finally, the major challenges that need to be addressed in this research field and the future perspective of nanofluidics development and practical applications are briefly illustrated.

Local Electric Potential-Driven Nanofluidic Ion Transport for Ultrasensitive Biochemical Sensing

Nanofluidic biosensors have been widely used for detection of analytes based on the change of system resistance before and after target-probe interactions. However, their sensitivity is limited when system resistance barely changes toward low-concentration targets. Here, we proposed a strategy to address this issue by means of target-induced change of local membrane potential under relatively unchanged system resistance. The local membrane potential originated from the directional diffusion of photogenerated carriers across nanofluidic biosensors and gated photoinduced ionic current signal before and after target-probe interactions. The sensitivity of such biosensors for the detection of biomolecules such as circulating tumor DNA (ctDNA) and lysozyme exceeds that of applying a traditional strategy by more than 3 orders of magnitude under unchanged system resistance. Such biosensors can specifically detect the small molecule biomarker in the blood sample between prostate cancer patients and healthy humans. The key advantages of such nanofluidic biosensors are therefore complementary to traditional nanofluidic biosensors, with potential applications in a point-of-care analytical tool.

Investigation of Structural and Antibacterial Properties of WS2-Doped ZnO Nanoparticles

ZnO nanoparticles, well-known for their structural, optical, and antibacterial properties, are widely applied in diverse fields. The doping of different materials to ZnO, such as metals or metal oxides, is known to ameliorate its properties. Here, nanofilms composed of ZnO doped with WS2 at 5, 15, and 25% ratios are synthesized, and their properties are investigated. Supported by molecular docking analyses, the enhancement of the bactericidal properties after the addition of WS2 at different ratios is highlighted and supported by the inhibitory interaction of residues playing a crucial role in the bacterial survival through the targeting of proteins of interest.

Efficient photo-driven ion pump through slightly reduced vertical graphene oxide membranes

Solar energy can be harvested using biological light-driven ion pumps for the sustainability of life. It remains a significant challenge to develop high-performance artificial light-driven ion pumps for solar energy harvesting in all solid-state materials. Here, we exploit the benefits of short channel lengths and efficient light absorption to demonstrate efficient photo-driven ion transport in slightly reduced vertical graphene oxide membranes (GOMs). Remarkably, this photo-driven ion pump exhibits excellent ability, countering a 10-fold electrolyte concentration gradient. We propose a plausible mechanism where light illumination enhances the electric potential of ion channels on GOMs triggered by the separation of photoexcited charge carriers between the sp2 and sp3 carbon clusters. This results in the establishment of an electric potential difference across the effective ion channels composed of sp3 carbon clusters, thus driving the directional transport of cations from the illuminated side to the non-illuminated side. The promising results of this study provide new possibilities for the application of vertical 2D nanofluidic membranes in areas such as artificial photosynthesis, light harvesting, and water treatment.

Achieving Solar-Thermal-Electro Integration Evaporator Nine-Grid Array with Asymmetric Strategy for Simultaneous Harvesting Clean Water and Electricity

Water evaporation is a ubiquitous and spontaneous phase transition process. The utilization of solar-driven interface water evaporation that simultaneously obtains clean water and power generation can effectively alleviate people's concerns about fresh water and energy shortages. However, it remains a great challenge to efficiently integrate the required functions into the same device to reduce the complexity of the system and alleviate its dependence on solar energy to achieve full-time operation. In this work, a multifunctional device based on reduced graphene oxide (RGO)/Mn3 O4 /Al2 O3 composite nanomaterials is realized by an asymmetric strategy for effective solar-thermal-electro integration that can induce power generation by water evaporation in the presence/absence of light. Under one sun irradiation, the solar-driven evaporation rate and output voltage are 1.74 kg m-2  h-1 and 0.778 V, respectively. More strikingly, the nine-grid evaporation/power generation array integrated with multiple devices in series has the advantages of small volume, large evaporation area, and high power generation, and can light up light-emitting diodes (LEDs), providing the possibility for large-scale production and application. Based on the high photothermal conversion efficiency and power production capacity of the RGO/Mn3 O4 /Al2 O3 composite evaporation/generator, it will be a promising energy conversion device for future sustainable energy development and applications.

Dual-Functional Super-Assembled Mesoporous Carbon-Titania/AAO Hetero-Channels for Bidirectionally Photo-Regulated Ion Transport

Photo-regulated nanofluidic devices have attracted great attention in recent years due to their adjustable ion transport in real time. However, most of the photo-responsive nanofluidic devices can only adjust the ionic current unidirectionally, and cannot simultaneously increase or decrease the current signal intelligently by one device. Herein, a mesoporous carbon-titania/ anodized aluminum hetero-channels (MCT/AAO) is constructed by super-assembly strategy, which exhibits dual-function of cation selectivity and photo response. The polymer and TiO2 nanocrystals jointly build the MCT framework. Polymer framework with abundant negatively charged sites endows MCT/AAO with excellent cation selectivity, and TiO2 nanocrystals are responsible for the photo-regulated ion transport. High photo current densities of 1.8 mA m-2 (increase) and 1.2 mA m-2 (decrease) are realized by MCT/AAO benefiting from the ordered hetero-channels. Significantly, MCT/AAO can also achieve the bidirectionally adjustable osmotic energy by alternating the configurations of concentration gradient. Theoretical and experimental results reveal that the superior photo-generated potential is responsible for the bidirectionally adjustable ion transport. Consequently, MCT/AAO performs the function of harvesting ionic energy from the equilibrium electrolyte solution, which greatly expands its practical application field. This work provides a new strategy in constructing dual-functional hetero-channels toward bidirectionally photo-regulated ionic transport and energy harvesting.

The Optimization of the Transition Zone of the Planar Heterogeneous Interface for High-Performance Seawater Desalination

Reverse osmosis has become the most prevalent approach to seawater desalination. It is still limited by the permeability-selectivity trade-off of the membranes and the energy consumption in the operation process. Recently, an efficient ionic sieving with high performance was realized by utilizing the bi-unipolar transport behaviour and strong ion depletion of heterogeneous structures in 2D materials. A perfect salt rejection rate of 97.0% and a near-maximum water flux of 1529 L m-2 h-1 bar-1 were obtained. However, the energy consumption of the heterogeneous desalination setup is a very important factor, and it remains largely unexplored. Here, the geometric-dimension-dependent ion transport in planar heterogeneous structures is reported. The two competitive ion migration behaviours during the desalination process, ion-depletion-dominated and electric-field-dominated ion transport, are identified for the first time. More importantly, these two ion-transport behaviours can be regulated. The excellent performance of combined high rejection rate, high water flux and low energy consumption can be obtained under the synergy of voltage, pressure and geometric dimension. With the appropriate optimization, the energy consumption can be reduced by 2 orders of magnitude, which is 50% of the industrial energy consumption. These findings provide beneficial insight for the application and optimized design of low-energy-consumption and portable water desalination devices.

Biomimetic Nanochannels: From Fabrication Principles to Theoretical Insights

Biological nanochannels which can regulate ionic transport across cell membranes intelligently play a significant role in physiological functions. Inspired by these nanochannels, numerous artificial nanochannels have been developed during recent years. The exploration of smart solid-state nanochannels can lay a solid foundation, not only for fundamental studies of biological systems but also practical applications in various fields. The basic fabrication principles, functional materials, and diverse applications based on artificial nanochannels are summarized in this review. In addition, theoretical insights into transport mechanisms and structure-function relationships are discussed. Meanwhile, it is believed that improvements will be made via computer-guided strategy in designing more efficient devices with upgrading accuracy. Finally, some remaining challenges and perspectives for developments in both novel conceptions and technology of this inspiring research field are stated.

Light-Controlled Ionic/Molecular Transport through Solid-State Nanopores and Nanochannels

Biological nanochannels perfectly operate in organisms and exquisitely control mass transmembrane transport for complex life process. Inspired by biological nanochannels, plenty of intelligent artificial solid-state nanopores and nanochannels are constructed based on various materials and methods with the development of nanotechnology. Specially, the light-controlled nanopores/nanochannels have attracted much attention due to the unique advantages in terms of that ion and molecular transport can be regulated remotely, spatially and temporally. According to the structure and function of biological ion channels, light-controlled solid-state nanopores/nanochannels can be divided into light-regulated ion channels with ion gating and ion rectification functions, and light-driven ion pumps with active ion transport property. In this review, we present a systematic overview of light-controlled ion channels and ion pumps according to the photo-responsive components in the system. Then, the related applications of solid-state nanopores/nanochannels for molecular sensing, water purification and energy conversion are discussed. Finally, a brief conclusion and short outlook are offered for future development of the nanopore/nanochannel field.

Photoresponsive Solid Nanochannels Membranes: Design and Applications

Light stimuli have notable advantages over other environmental stimuli, such as more precise spatial and temporal regulation, and the ability to serve as an energy source to power the system. In nature, photoresponsive nanochannels are important components of organisms, with examples including the rhodopsin channels in optic nerve cells and photoresponsive protein channels in the photosynthesis system of plants. Inspired by biological channels, scientists have constructed various photoresponsive, smart solid-state nanochannels membranes for a range of applications. In this review, the methods and applications of photosensitive nanochannels membranes are summarized. The authors believe that this review will inspire researchers to further develop multifunctional artificial nanochannels for applications in the fields of biosensors, stimuli-responsive smart devices, and nanofluidic devices, among others.

Angstrom-scale ion channels towards single-ion selectivity

Artificial ion channels with ion permeability and selectivity comparable to their biological counterparts are highly desired for efficient separation, biosensing, and energy conversion technologies. In the past two decades, both nanoscale and sub-nanoscale ion channels have been successfully fabricated to mimic biological ion channels. Although nanoscale ion channels have achieved intelligent gating and rectification properties, they cannot realize high ion selectivity, especially single-ion selectivity. Artificial angstrom-sized ion channels with narrow pore sizes <1 nm and well-defined pore structures mimicking biological channels have accomplished high ion conductivity and single-ion selectivity. This review comprehensively summarizes the research progress in the rational design and synthesis of artificial subnanometer-sized ion channels with zero-dimensional to three-dimensional pore structures. Then we discuss cation/anion, mono-/di-valent cation, mono-/di-valent anion, and single-ion selectivities of the synthetic ion channels and highlight their potential applications in high-efficiency ion separation, energy conversion, and biological therapeutics. The gaps of single-ion selectivity between artificial and natural channels and the connections between ion selectivity and permeability of synthetic ion channels are covered. Finally, the challenges that need to be addressed in this research field and the perspective of angstrom-scale ion channels are discussed.

Conductivity Mechanism in Ionic 2D Carbon Nitrides: From Hydrated Ion Motion to Enhanced Photocatalysis

Carbon nitrides are among the most studied materials for photocatalysis; however, limitations arise from inefficient charge separation and transport within the material. Here, this aspect is addressed in the 2D carbon nitride poly(heptazine imide) (PHI) by investigating the influence of various counterions, such as M = Li⁺ , Na⁺ , K⁺ , Cs⁺ , Ba²⁺ , NH₄ ⁺ , and tetramethyl ammonium, on the material's conductivity and photocatalytic activity. These ions in the PHI pores affect the stacking of the 2D layers, which further influences the predominantly ionic conductivity in M-PHI. Na-containing PHI outperforms the other M-PHIs in various relative humidity (RH) environments (0-42%RH) in terms of conductivity, likely due to pore-channel geometry and size of the (hydrated) ion. With increasing RH, the ionic conductivity increases by 4-5 orders of magnitude (for Na-PHI up to 10^-5 S cm^-1 at 42%RH). At the same time, the highest photocatalytic hydrogen evolution rate is observed for Na-PHI, which is mirrored by increased photogenerated charge-carrier lifetimes, pointing to efficient charge-carrier stabilization by, e.g., mobile ions. These results indicate that also ionic conductivity is an important parameter that can influence the photocatalytic activity. Besides, RH-dependent ionic conductivity is of high interest for separators, membranes, or sensors.

Facile synthesis of efficient construction of tungsten disulfide/iron cobaltite nanocomposite grown on nickel foam as a battery-type energy material for electrochemical supercapacitors with superior performance

In this research literature, a tungsten disulfide/iron cobaltite (WS₂/FeCo₂O₄) interwoven construction array was prepared by a simplistic hydrothermal approach on Ni foam as an integrative electrode for supercapacitors (SCs). For characterization of the wearing of WS₂ nanostructure on FeCo₂O₄ nanosheets (WS₂/FeCo₂O₄) by the Scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The WS₂/FeCo₂O₄ nanosheets supply a larger surface region and sufficient space to allow for volume changes. Moreover, considerable features of wellbeing conductivity from the Ni foam conductor and the synergistic procedures between WS₂ and FeCo₂O₄, the integrated WS₂/FeCo₂O₄ composite achieved prominent SCs storage performances with a higher specific capacity of 1122C g^-1 (2492.9F g^-1) at 1 A g^-1 and notable capacity retention of 98.1% at 3 A g^-1 after 5000 long cycles and retained higher rate capacity of 951.9 C g^-1 at 15 A g^-1. For practical application, an asymmetric supercapacitors type WS₂/FeCo₂O₄//active carbon (WS₂/FeCo₂O₄//AC) device was successfully prepared. The WS₂/FeCo₂O₄//AC device displays a higher specific capacity of 110C g^-1 and energy density of 85.68 W h kg^-1 at power density at 897.65 W kg^-1, as well as the superior initial capacitance of 98.7% with cyclic stabilities after 4000 long cycles. Thus, these results indicated the great potential of the constructed WS₂/FeCo₂O₄//AC in the scenario electrochemical properties due to their outstanding energy storage activities.

Ionic Transport Triggered by Asymmetric Illumination on 2D Nano-Membrane

Ionic transport and ion sieving are important in the field of separation science and engineering. Based on the rapid development of nanomaterials and nano-devices, more and more phenomena occur on the nanoscale devices in the field of thermology, optics, mechanics, etc. Recently, we experimentally observed a novel ion transport phenomenon in nanostructured graphene oxide membrane (GOM) under asymmetric illumination. We first build a light-induced carriers’ diffusion model based on our previous experimental results. This model can reveal the light-induced ion transport mechanism and predict the carriers’ diffusion behavior under different operational situations and material characters. The voltage difference increases with the rise of illuminate asymmetry, photoresponsivity, recombination coefficient, and carriers’ diffusion coefficient ratio. Finally, we discuss the ion transport behavior with different surface charge densities using MD simulation. Moderate surface charge decreases the ion transport with the same type of charge due to the electrostatic repulsion; however, excess surface charge blocks both cation and anion because a thicker electrical double layer decreases effective channel height. Research here provides referenced operational and material conditions to obtain a greater voltage difference between the membrane sides. Also, the mechanism of ion transport and ion sieving can guide us to modify membrane material according to different aims.

Interfacial Super-Assembly of Ordered Mesoporous Carbon-Silica/AAO Hybrid Membrane with Enhanced Permselectivity for Temperature- and pH-Sensitive Smart Ion Transport

Nanofluidic devices have been widely used for diode-like ion transport and salinity gradients energy conversion. Emerging reverse electrodialysis (RED) nanofluidic systems based on nanochannel membrane display great superiority in salinity gradient energy harvesting. However, the imbalance between permeability and selectivity limits their practical application. Here, a new mesoporous carbon-silica/anodized aluminum (MCS/AAO) nanofluidic device with enhanced permselectivity for temperature- and pH-regulated energy generation was obtained by interfacial super-assembly method. A maximum power density of 5.04 W m^-2 is achieved, and a higher performance can be obtained by regulating temperature and pH. Theoretical calculations are further implemented to reveal the mechanism for ion rectification, ion selectivity and energy conversion. Results show that the MCS/AAO hybrid membrane has great superiority in diode-like ion transport, temperature- and pH-regulated salinity gradient energy conversion.

The Combination of 2D Layered Graphene Oxide and 3D Porous Cellulose Heterogeneous Membranes for Nanofluidic Osmotic Power Generation

Salinity gradient energy, as a type of blue energy, is a promising sustainable energy source. Its energy conversion efficiency is significantly determined by the selective membranes. Recently, nanofluidic membrane made by two-dimensional (2D) nanomaterials (e.g., graphene) with densely packed nanochannels has been considered as a high-efficient membrane in the osmotic power generation research field. Herein, the graphene oxide-cellulose acetate (GO-CA) heterogeneous membrane was assembled by combining a porous CA membrane and a layered GO membrane; the combination of 2D nanochannels and 3D porous structures make it show high surface-charge-governed property and excellent ion transport stability, resulting in an efficient osmotic power harvesting. A power density of about 0.13 W/m² is achieved for the sea-river mimicking system and up to 0.55 W/m² at a 500-fold salinity gradient. With different functions, the CA and GO membranes served as ion storage layer and ion selection layer, respectively. The GO-CA heterogeneous membrane open a promising avenue for fabrication of porous and layered platform for wide potential applications, such as sustainable power generation, water purification, and seawater desalination.

Unidirectionally Driving Nanofluidic Transportation via an Asymmetric Textile Pump for Simultaneous Salt-Resistant Solar Desalination and Drenching-Induced Power Generation

Solar-driven seawater desalination provides a promising technology for sustainable water energy harvesting. Although tremendous efforts have been dedicated to developing efficient evaporators, the challenge of preventing salt accumulation while simultaneously realizing high-performance steam-electricity cogeneration remains to be addressed. In this work, inspired by the water and solute transportation in plants via the wicking mechanism, a one-way asymmetric nanofluidic photothermal evaporator fabricated by disproportionately depositing photothermal MXene nanosheets on a hydrophilic cotton textile is reported for simultaneous freshwater and power production. By unidirectionally driving dynamic saline transportation via this photothermal cotton textile pump, this evaporator not only enables self-operating salt rejection for stable steam generation but also affords continuous electric power generation induced by the formation of an asymmetric double electrode layer within MXene nanochannels under the drenching state. Specifically, the solar-driven evaporation rate and voltage generation reach 1.38 kg/m²/h (with a conversion efficiency of 83.1%) and 363 mV under 1 sun irradiation, respectively. Notably, this designed nanofluidic system suffers negligible performance depreciation after 30 h of operation and washing 15 times, which indicates its outstanding stability and reusability. This facile design of the asymmetric nanofluidic photothermal system may provide prospective opportunities for scaling up sustainable freshwater and electric power production.

Light-Controlled Ionic Transport through Molybdenum Disulfide Membranes

In recent years, two-dimensional (2D) nanomaterials have been extensively explored in the field of nanofluidics due to their interconnected and well-controlled nanochannels. In particular, the investigation of 2D nanomaterials using their intrinsic properties for smart nanofluidics is receiving increased interest. Here, we report that MoS₂ membranes can be used for light-controlled nanofluidic applications based on their photoelectrical properties. We show that the MoS₂ membranes exhibit surface charge-governed ionic transport in NaCl and KCl solution without light illumination, while the ionic conductivity of the MoS₂ membranes is up to 2 orders of magnitude higher at low concentration solution than that in bulk solution. We also show that the ionic conductivity of the membranes is enhanced under light illumination at 405 and 635 nm and reversible and stable switching of ionic current upon light illumination is observed. In addition, ionic current through membranes is enhanced by increasing light intensity. Therefore, our findings demonstrate that MoS₂ membranes can be a potential platform for light-controlled nanofluidic applications.

Harnessing Ionic Power from Equilibrium Electrolyte Solution via Photoinduced Active Ion Transport through van-der-Waals-Like Heterostructures

Nanofluidic ion transport through van der Waals heterostructures, composed of two or more types of reconstructed 2D nanomaterials, gives rise to fascinating opportunities for light-energy harvesting, due to coupling between the optoelectronic properties of the layered constituents and ion transport in between the atomic layers. Here, a photoinduced active ion transport phenomenon through transition metal dichalcogenides (TMDs)-based van-der-Waals-like multilayer heterostructures is reported for harnessing ionic power from equilibrium electrolyte solution. The binary heterostructure comprises sequentially stacked 2D-WS₂ and 2D-MoS₂ multilayers with sub-1 nm interlayer spacing. Upon visible-light illumination, a net ionic flow is initiated through the Janus membrane, suggesting a directional cationic transport from WS₂ to MoS₂ part. The transport mechanism is explained in terms of a photovoltaic effect due to type II band alignment of WS₂ /MoS₂ heterostructures. The driving mechanism can be generally applied to a variety of heterogeneous TMD membranes with type II semiconductor heterojunctions. In equilibrium ionic solutions, the maximum ionic photoresponse approaches ≈21 µA cm^-2 and ≈45 mV under one sun equivalent excitation. Under optimized conditions, the harvested power density reaches 2 mW m^-2 . The proof-of-concept demonstration of photonic-to-ionic power generation within angstrom-scale confinement anticipates potential for light-controlled ionic circuits, artificial photosynthesis, and biomimetic energy conversion.

Light-Driven Active Ion Transport

Solar energy can be harvested by biological systems to regulate the directional transport of protons and ions across cells and organelles. Structural and functional bio-mimic photo-active ion nanofluidic conductors, usually in the forms of ion channels and ion pumps, have been increasingly applied to realize active ion transport. However, progress in attaining effective light-driven active transport of ions (protons) has been constrained by the inherent limitations of membrane materials and their chemical and topological structures. Recent advances in the construction of photo-responsive physical ion pump in all-solid-state membranes could potentially lead to new classes of membrane-based materials for active ion transport. In this concept, the development of the state-of-the-art technologies for manufacturing artificial light-driven active ion transport systems are presented and discussed, which mainly involves the utilization of solar energy to realize two types of active ion transport, chemically and physically active ion transport. Afterward, we summarize the key factors towards culminating highly effective and selective membranes for active ion transport. To conclude, we highlight the promising application perspectives of this light-driven active ion transport technique in the field of energy conversion, bio-interfaces and water treatment.

Improved Rectification and Osmotic Power in Polyelectrolyte-Filled Mesopores

Ample studies have shown the use of nanofluidics in the ionic diode and osmotic power generation, but similar ionic devices performed with large-sized mesopores are still poorly understood. In this study, we model and realize the mesoscale ionic diode and osmotic power generator, composed of an asymmetric cone-shaped mesopore with its narrow opening filled with a polyelectrolyte (PE) layer with high space charges. We show that, only when the space charge density of a PE layer is sufficiently large (>1×106 C/m3), the considered mesopore system is able to create an asymmetric ionic distributions in the pore and then rectify ionic current. As a result, the output osmotic power performance can be improved when the filled PE carries sufficiently high space charges. For example, the considered PE-filled mesopore system can show an amplification of the osmotic power of up to 35.1-fold, compared to the bare solid-state mesopore. The findings provide necessary information for the development of large-sized ionic diode and osmotic power harvesting device.

Photothermoelectric Response of Ti3C2Tx MXene Confined Ion Channels

With recent growing interest in biomimetic smart nanochannels, a biological sensory transduction in response to external stimuli has been of particular interest in the development of biomimetic nanofluidic systems. Here we demonstrate the MXene-based subnanometer ion channels that convert external temperature changes to electric signals via preferential diffusion of cations under a thermal gradient. In particular, coupled with a photothermal conversion feature of MXenes, an array of the nanoconfined Ti3C2Tx ion channels can capture trans-nanochannel diffusion potentials under a light-driven axial temperature gradient. The nonisothermal open-circuit potential across channels is enhanced with increasing cationic permselectivity of confined channels, associated with the ionic concentration or pH of permeant fluids. The photothermoelectric ionic response (evaluated from the ionic Seebeck coefficient) reached up to 1 mV·K-1, which is comparable to biological thermosensory channels, and demonstrated stability and reproducibility in the absence and presence of an ionic concentration gradient. With advantages of physicochemical tunability and easy fabrication process, the lamellar ion conductors may be an important nanofluidic thermosensation platform possibly for biomimetic sensory systems.

In situ synthesis of a MOFs/PAA hybrid with ultrahigh ionic current rectification

In recent decades, the ionic current rectification (ICR) property of asymmetric nanochannels has been widely explored in applications of energy conversion, gas separation, water purification and bioanalysis/sensors. How to fabricate nanofluidic devices with a high ICR characteristic remains of critical importance to the development of nanofluidics. Herein, we fabricated an asymmetric MOFs/PAA hybrid via in situ synthesis of a zeolitic imidazole framework (ZIF-90) on porous anodic alumina (PAA) nanochannels. The introduction of asymmetric geometry and charge distribution provides the hybrid with ultrahigh ionic rectification, which can be easily measured using an electrochemical detector. This rectification mechanism is elucidated via finite element simulation, which proves that asymmetric geometry as well as the protonation and deprotonation under varied pH values dominates the ICR property. With the advantages of low cost and facile fabrication while supporting high ionic current rectification, the prepared MOFs/PAA hybrid can be considered as a significant paradigm in nanofluidic systems and has potential applications in the fields of new ionic devices and energy conversion systems.

Electric-Field-Induced Ionic Sieving at Planar Graphene Oxide Heterojunctions for Miniaturized Water Desalination

Layered graphene oxide membranes (GOMs) offer a unique platform for precise sieving of small ions and molecules due to controlled sub-nanometer-wide interlayer distance and versatile surface chemistry. Pristine and chemically modified GOMs effectively block organic dyes and nanoparticles, but fail to exclude smaller ions with hydrated diameters less than 9 Å. Toward sieving of small inorganic salt ions, a number of strategies are proposed by reducing the interlayer spacing down to merely several angstroms. However, one critical challenge for such compressed GOMs is the extremely low water flux (<0.1 Lm^-2 h^-1 bar^-1 ) that prevents these innovative nanomaterials from being used in real-world applications. Here, a planar heterogeneous graphene oxide membrane (PHGOM) with both nearly perfect salt rejection and high water flux is reported. Horizontal ion transport through oppositely charged GO multilayer lateral heterojunction exhibits bi-unipolar transport behavior, blocking the conduction of both cations and anions. Assisted by a forward electric field, salt concentration is depleted in the near-neutral transition area of the PHGOM. In this situation, deionized water can be extracted from the depletion zone. Following this mechanism, a high rejection rate of 97.0% for NaCl and water flux of 1529 Lm^-2 h^-1 bar^-1 at the outlet via an inverted T-shaped water extraction mode are achieved.

Hierarchical WS2@NiCo2O4 Core-shell Heterostructure Arrays Supported on Carbon Cloth as High-Performance Electrodes for Symmetric Flexible Supercapacitors

Nowadays, rationally preparing heterostructure materials can not only make up for the shortage of individual components, but also exert unexpected performance through synergistic interactions between the components. Herein, a core-shell of WS₂@NiCo₂O₄ screw-like heterostructure arrays grown on carbon cloth (CC) was prepared by a two-step solvothermal method for supercapacitors. As a binder-free flexible electrode, a high areal capacitance of 2449.9 mF cm^-2 can be achieved for WS₂@NiCo₂O₄/CC at a current density of 1 mA cm^-2. Benefiting from the core-shell of the WS₂@NiCo₂O₄ heterostructure, the capacitive property of the flexible WS₂@NiCo₂O₄/CC electrode is better than those of WS₂/CC and NiCo₂O₄/CC electrodes. Based on WS₂@NiCo₂O₄/CC electrodes, the assembled flexible solid-state symmetric supercapacitor (FSS) device shows a high energy density of ∼45.67 W h kg^-1 at a power density of 992.83 W kg^-1. Meantime, the WS₂@NiCo₂O₄/CC-assembled FSS device also exhibits high cycling stability with an excellent capacity retention of ∼85.59% after 5000 cycles.