Metal-Layer Assisted Growth of Ultralong Quasi-2D MOF Nanoarrays on Arbitrary Substrates for Accelerated Oxygen Evolution

Modulation of morphology and electronic structure of cobalt thiophenedicarboxylic coordination polymer via ligand exchange for high-performance oxygen evolution reaction and supercapacitor

Rationally designing metal organic frameworks (MOFs) as an ideal dual-function material for water electrolysis and supercapacitors is of great significance for energy storage and conversion. Herein, we successfully synthesized the nanoneedle-like structure CoNi-MOF by partially replacing 2, 5-thiophenedicarboxylic acid (TDA) with 1, 1'-Ferrocenedicarboxylate (Fc). The exchange of Fc ligand can modulate the morphology and electronic structure of CoNi-TDA, thus exposing the abundant active sites and improving the electrical conductivity. The as-prepared CoNi-TDA/0.2Fc exhibited a low overpotential of 236 mV at 10 mA cm-2 for oxygen evolution reaction (OER) and a low Tafel slope of 40.44 mV dec-1. Additionally, CoNi-TDA/0.2Fc demonstrated a notable specific capacitance of 1409 F g-1 at 1 A/g and excellent stability, maintaining a capacitance retention of 96.54 % after 20,000 cycles. The study proposes a new strategy to modulate the morphology and electronic structure of MOFs via the ligand exchange for high-performance energy storage and conversion device.

Facile synthesis of amorphous/crystalline Ni-Fe thiophenedicarboxylate coordination polymer nanobelts for efficient water oxidation

The oxygen evolution reaction (OER) is a complex four-electron transfer process that poses a significant challenge to the efficient production of hydrogen through water splitting. However, developing non-noble metal electrocatalyst with excellent OER performance is still a big challenge. Herein, we propose a new strategy for the in-situ growth of two-dimensional amorphous/crystalline thiophene-based Ni-Fe metal-organic frameworks (MOFs) using Ni-Fe foam (NFF) as metal source and current collector, and thiophene-2,5-dicarboxylic acid (TDC) as corrosion agent and ligand. TDC was ionized at high temperature to produce H+ ions that etch NFF to release Ni2+ and Fe2+ ions, which were coordinated with TDC to in situ synthesize two-dimensional Ni-Fe thiophenedicarboxylate coordination polymer (NiFe-TDC) nanobelts on NFF. The unique structure and synergistic effect of Ni and Fe ions of NiFe-TDC0.05 result in the excellent OER performance with an overpotential of 224 and 256 mV at current densities of 10 and 100 mA cm-2, respectively, and it can run stably for 100 h at a current density of 100 mA cm-2, indicating the outstanding stability. Furthermore, NiFe-TDC0.05 remains the excellent OER performance with an extremely low potential of 196 and 271 mV at current densities of 10 and 100 mA cm-2 in seawater with 1 mol L-1 (M) KOH, respectively. The assembled NiFe-TDC0.05 || Pt/C water electrolysis cell achieves a current density of 100 mA cm-2 at a low voltage of 1.78 V. The work provides a new method to prepare two dimensional MOFs for efficient water oxidation.

Catalysis with Two-Dimensional Metal-Organic Frameworks: Synthesis, Characterization, and Modulation

The demand for the exploration of highly active and durable electro/photocatalysts for renewable energy conversion has experienced a significant surge in recent years. Metal-organic frameworks (MOFs), by virtue of their high porosity, large surface area, and modifiable metal centers and ligands, have gained tremendous attention and demonstrated promising prospects in electro/photocatalytic energy conversion. However, the small pore sizes and limited active sites of 3D bulk MOFs hinder their wide applications. Developing 2D MOFs with tailored thickness and large aspect ratio has emerged as an effective approach to meet these challenges, offering a high density of exposed active sites, better mechanical stability, better assembly flexibility, and shorter charge and photoexcited state transfer distances compared to 3D bulk MOFs. In this review, synthesis methods for the most up-to-date 2D MOFs are first overviewed, highlighting their respective advantages and disadvantages. Subsequently, a systematic analysis is conducted on the identification and electronic structure modulation of catalytic active sites in 2D MOFs and their applications in renewable energy conversion, including electrocatalysis and photocatalysis (electro/photocatalysis). Lastly, the current challenges and future development of 2D MOFs toward highly efficient and practical electro/photocatalysis are proposed.

Rational Design of Organic Electrocatalysts for Hydrogen and Oxygen Electrocatalytic Applications

Efficient electrocatalysts are pivotal for advancing green energy conversion technologies. Organic electrocatalysts, as cost-effective alternatives to noble-metal benchmarks, have garnered attention. However, the understanding of the relationships between their properties and electrocatalytic activities remains ambiguous. Plenty of research articles regarding low-cost organic electrocatalysts started to gain momentum in 2010 and have been flourishing recently though, a review article for both entry-level and experienced researchers in this field is still lacking. This review underscores the urgent need to elucidate the structure-activity relationship and design suitable electrode structures, leveraging the unique features of organic electrocatalysts like controllability and compatibility for real-world applications. Organic electrocatalysts are classified into four groups: small molecules, oligomers, polymers, and frameworks, with specific structural and physicochemical properties serving as activity indicators. To unlock the full potential of organic electrocatalysts, five strategies are discussed: integrated structures, surface property modulation, membrane technologies, electrolyte affinity regulation, and addition of anticorrosion species, all aimed at enhancing charge efficiency, mass transfer, and long-term stability during electrocatalytic reactions. The review offers a comprehensive overview of the current state of organic electrocatalysts and their practical applications, bridging the understanding gap and paving the way for future developments of more efficient green energy conversion technologies.

Engineering organic polymers as emerging sustainable materials for powerful electrocatalysts

Cost-effective and high-efficiency catalysts play a central role in various sustainable electrochemical energy conversion technologies that are being developed to generate clean energy while reducing carbon emissions, such as fuel cells, metal-air batteries, water electrolyzers, and carbon dioxide conversion. In this context, a recent climax in the exploitation of advanced earth-abundant catalysts has been witnessed for diverse electrochemical reactions involved in the above mentioned sustainable pathways. In particular, polymer catalysts have garnered considerable interest and achieved substantial progress very recently, mainly owing to their pyrolysis-free synthesis, highly tunable molecular composition and microarchitecture, readily adjustable electrical conductivity, and high stability. In this review, we present a timely and comprehensive overview of the latest advances in organic polymers as emerging materials for powerful electrocatalysts. First, we present the general principles for the design of polymer catalysts in terms of catalytic activity, electrical conductivity, mass transfer, and stability. Then, the state-of-the-art engineering strategies to tailor the polymer catalysts at both molecular (i.e., heteroatom and metal atom engineering) and macromolecular (i.e., chain, topology, and composition engineering) levels are introduced. Particular attention is paid to the insightful understanding of structure-performance correlations and electrocatalytic mechanisms. The fundamentals behind these critical electrochemical reactions, including the oxygen reduction reaction, hydrogen evolution reaction, CO2 reduction reaction, oxygen evolution reaction, and hydrogen oxidation reaction, as well as breakthroughs in polymer catalysts, are outlined as well. Finally, we further discuss the current challenges and suggest new opportunities for the rational design of advanced polymer catalysts. By presenting the progress, engineering strategies, insightful understandings, challenges, and perspectives, we hope this review can provide valuable guidelines for the future development of polymer catalysts.

Ultrafine Pt Nanoparticles Anchored on 2D Metal-Organic Frameworks as Multifunctional Electrocatalysts for Water Electrolysis and Zinc-Air Batteries

Multifunctional electrocatalysts are crucial to cost-effective electrochemical energy conversion and storage systems requiring mutual enhancement of disparate reactions. Embedding noble metal nanoparticles in 2D metal-organic frameworks (MOFs) are proposed as an effective strategy, however, the hybrids usually suffer from poor electrochemical performance and electrical conductivity in operating conditions. Herein, ultrafine Pt nanoparticles strongly anchored on thiophenedicarboxylate acid based 2D Fe-MOF nanobelt arrays (Pt@Fe-MOF) are fabricated, allowing sufficient exposure of active sites with superior trifunctional electrocatalytic activity for hydrogen evolution, oxygen evolution, and oxygen reduction reactions. The interfacial Fe─O─Pt bonds can induce the charge redistribution of metal centers, leading to the optimization of adsorption energy for reaction intermediates, while the dispersibility of ultrafine Pt nanoparticles contributes to the high mass activity. When Pt@Fe-MOF is used as bifunctional catalysts for water-splitting, a low voltage of 1.65 V is required at 100 mA cm-2 with long-term stability for 20 h at temperatures (65 °C) relevant for industrial applications, outperforming commercial benchmarks. Furthermore, liquid Zn-air batteries with Pt@Fe-MOF in cathodes deliver high open-circuit voltages (1.397 V) and decent cycling stability, which motivates the fabrication of flexible quasisolid-state rechargeable Zn-air batteries with remarkable performance.

Electrocatalytic Microdevice Array Based on Wafer-Scale Conductive Metal-Organic Framework Thin Film for Massive Hydrogen Production

The synthesis of large-scale 2D conductive metal-organic framework films with tunable thickness is highly desirable but challenging. In this study, an Interface Confinement Self-Assembly Pulling (ICSP) method for in situ synthesis of 4-in. Ni-BHT film on the substrate surface is developed. By modulating the thickness of the confined space, the thickness of Ni-BHT films could be easily varied from 4 to 42 nm. To eliminate interference factors and evaluate the effect of film thickness on the catalytic performance of HER, an electrocatalytic microdevice based on the Ni-BHT film is designed. The effective catalytic thickness of the Ni-BHT film is found to be around 32 nm. Finally, to prepare the electrocatalytic microdevice array, over 100 000 microdevices on a 4-in. Ni-BHT film are integrated. The results show that the microdevice array has good stability and a high hydrogen production rate and could be used to produce large amounts of hydrogen. The wafer-scale 2D conductive metal-organic framework's fabrication greatly advances the practical application of microdevices for massive hydrogen production.

2D Metal-Organic Frameworks as Competent Electrocatalysts for Water Splitting

Hydrogen, a clean and flexible energy carrier, can be efficiently produced by electrocatalytic water splitting. To accelerate the sluggish hydrogen evolution reaction and oxygen evolution reaction kinetics in the splitting process, highly active electrocatalysts are essential for lowering the energy barriers, thereby improving the efficiency of overall water splitting. Combining the distinctive advantages of metal-organic frameworks (MOFs) with the physicochemical properties of 2D materials such as large surface area, tunable structure, accessible active sites, and enhanced conductivity, 2D MOFs have attracted intensive attention in the field of electrocatalysis. Different strategies, such as improving the conductivities of MOFs, reducing the thicknesses of MOF nanosheets, and integrating MOFs with conductive particles or substrates, are developed to promote the catalytic performances of pristine MOFs. This review summarizes the recent advances of pristine 2D MOF-based electrocatalysts for water electrolysis. In particular, their intrinsic electrocatalytic properties are detailly analyzed to reveal important roles of inherent MOF active centers, or other in situ generated active phases from MOFs responsible for the catalytic reactions. Finally, the challenges and development prospects of pristine 2D MOFs for the future applications in overall water splitting are discussed.

Optimizing d-Orbital Electronic Configuration via Metal-Metal Oxide Core-Shell Charge Donation for Boosting Reversible Oxygen Electrocatalysis

Tuning the d-orbital electronic configuration of active sites to achieve well-optimized adsorption strength of oxygen-containing intermediates toward reversible oxygen electrocatalysis is desirable for efficient rechargeable Zn-Air batteries but extremely challenging. Herein, this work proposes to construct a Co@Co₃ O₄ core-shell structure to regulate the d-orbital electronic configuration of Co₃ O₄ for the enhanced bifunctional oxygen electrocatalysis. Theoretical calculations first evidence that electron donation from Co core to Co₃ O₄ shell could downshift the d-band center and simultaneously weak spin state of Co₃ O₄ , result in the well-optimized adsorption strength of oxygen-containing intermediates on Co₃ O₄ , thus contributing a favor way for oxygen reduction/evolution reaction (ORR/OER) bifunctional catalysis. As a proof-of-concept, the Co@Co₃ O₄ embedded in Co, N co-doped porous carbon derived from thickness controlled 2D metal-organic-framework is designed to realize the structure of computational prediction and further improve the performance. The optimized 15Co@Co₃ O₄ /PNC catalyst exhibits the superior bifunctional oxygen electrocatalytic activity with a small potential gap of 0.69 V and a peak power density of 158.5 mW cm^-2 in ZABs. Moreover, DFT calculations shows that the more oxygen vacancies on Co₃ O₄ contribute too strong adsorption of oxygen intermediates which limit the bifunctional electrocatalysis, while electron donation in the core-shell structure can alleviate the negative effect and maintain superior bifunctional overpotential.

Self-Supporting Metal-Organic Framework-Based Nanoarrays for Electrocatalysis

The replacement of powdery catalysts with self-supporting alternatives for catalyzing various electrochemical reactions is extremely important for the large-scale commercial application of renewable energy storage and conversion technologies. Metal-organic framework (MOF)-based nanoarrays possess tunable compositions, well-defined structure, abundant active sites, effective mass and electron transport, etc., which enable them to exhibit superior electrocatalytic performance in multiple electrochemical reactions. This review presents the latest research progress in developing MOF-based nanoarrays for electrocatalysis. We first highlight the structural features and electrocatalytic advantages of MOF-based nanoarrays, followed by a detailed summary of the design and synthesis strategies of MOF-based nanoarrays, and then describe the recent progress of their application in various electrocatalytic reactions. Finally, the challenges and perspectives are discussed, where further exploration into MOF-based nanoarrays will facilitate the development of electrochemical energy conversion technologies.

Conductive Co-triazole metal-organic framework exploited as an oxygen evolution electrocatalyst

A Co-triazole metal-organic framework (Co-trz) endowed with electrical conductivity was synthesized effortlessly via a microwave-based method. Providing a high density of catalytic centers with electrically conductive features, as suggested by DFT calculations, the framework exhibited a low overpotential for the oxygen evolution reaction (OER) with good kinetics. A mechanistic reaction pathway was proposed based on monitoring alterations in the oxidation state and local coordination environment of Co centers upon the occurrence of the OER. Due to its performance and its chemical and electrochemical robustness, the framework was highlighted as a promising MOF electrocatalyst for the OER.

Design of Quasi-MOF Nanospheres as a Dynamic Electrocatalyst toward Accelerated Sulfur Reduction Reaction for High-Performance Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are considered as one of the most promising next-generation rechargeable batteries owing to their high energy density and cost-effectiveness. However, the sluggish kinetics of the sulfur reduction reaction process, which is so far insufficiently explored, still impedes its practical application. Metal-organic frameworks (MOFs) are widely investigated as a sulfur immobilizer, but the interactions and catalytic activity of lithium polysulfides (LiPs) on metal nodes are weak due to the presence of organic ligands. Herein, a strategy to design quasi-MOF nanospheres, which contain a transition-state structure between the MOF and the metal oxide via controlled ligand exchange strategy, to serve as sulfur electrocatalyst, is presented. The quasi-MOF not only inherits the porous structure of the MOF, but also exposes abundant metal nodes to act as active sites, rendering strong LiPs absorbability. The reversible deligandation/ligandation of the quasi-MOF and its impact on the durability of the catalyst over the course of the electrochemical process is acknowledged, which confers a remarkable catalytic activity. Attributed to these structural advantages, the quasi-MOF delivers a decent discharge capacity and low capacity-fading rate over long-term cycling. This work not only offers insight into the rational design of quasi-MOF-based composites but also provides guidance for application in Li-S batteries.

Crystalline Porous Materials for Nonlinear Optics

Crystalline porous materials have been extensively explored for wide applications in many fields including nonlinear optics (NLO) for frequency doubling, two-photon absorption/emission, optical limiting effect, photoelectric conversion, and biological imaging. The structural diversity and flexibility of the crystalline porous materials such as the metal-organic frameworks, covalent organic frameworks, and polyoxometalates provide numerous opportunities to orderly organize the dipolar chromophores and to systemically modify the type and concentration of these dipolar chromophores in the confined spaces, which are highly desirable for NLO. Here, the recent advances in the crystalline porous NLO materials are discussed. The second-order NLO of crystalline porous materials have been mainly devoted to the chiral and achiral structures, while the third-order NLO crystalline porous materials have been categorized into pure organic and hybrid organic/inorganic materials. Some representative properties and applications of these crystalline porous materials in the NLO regime are highlighted. The future perspective of challenges as well as the potential research directions of crystalline porous materials have been also proposed.

Recent Progress on NiFe-Based Electrocatalysts for the Oxygen Evolution Reaction

The seriousness of the energy crisis and the environmental impact of global anthropogenic activities have led to an urgent need to develop efficient and green fuels. Hydrogen, as a promising alternative resource that is produced in an environmentally friendly and sustainable manner by a water splitting reaction, has attracted extensive attention in recent years. However, the large-scale application of water splitting devices is hindered predominantly by the sluggish oxygen evolution reaction (OER) at the anode. Therefore, the design and exploration of high-performing OER electrocatalysts is a critical objective. Considering their low prices, abundant reserves, and intrinsic activities, NiFe-based bimetal compounds are widely studied as excellent OER electrocatalysts. Moreover, recent progress on NiFe-based OER electrocatalysts in alkaline environments is comprehensively and systematically introduced through various catalyst families including NiFe-layered hydroxides, metal-organic frameworks, NiFe-based (oxy)hydroxides, NiFe-based oxides, NiFe alloys, and NiFe-based nonoxides. This review briefly introduces the advanced NiFe-based OER materials and their corresponding reaction mechanisms. Finally, the challenges inherent to and possible strategies for producing extraordinary NiFe-based electrocatalysts are discussed.

In Situ Growth of Tetrametallic FeCoMnNi-MOF-74 on Nickel Foam as Efficient Bifunctional Electrocatalysts for the Evolution Reaction of Oxygen and Hydrogen

Multivariate metal-organic frameworks (MTV-MOFs) have drawn much attention in recent years for their promising applications in many fields of chemistry and materials. Constructing functional MOFs from multiple components for electrochemical water is crucial to high performance renewable energy storage and conversion devices. In this work, a series of bitmetallic-, trimetallic-, and tetrametallic-MOF-74/NFs were grown in situ on nickel foam (NF) by a facile solvothermal route. Specifically, the optimized FeCoMnNi-MOF-74/NF with a multilevel and hollow nanostructure was successfully fabricated and used as highly efficient bifunctional electrocatalysts for water splitting. It exhibited an ultralow overpotential of 250 and 108 mV to achieve the current density of 50 and 10 mA cm^-2, along with the relatively small Tafel slope of 41.28 and 72.89 mV dec^-1 for OER and HER in 1 M KOH, respectively. It is superior to other multimetallic-MOF-74 composites at the same condition and also surpasses the benchmark of commercial noble-metal catalysts as well. As a result, a low cell voltage of ca. 1.62 V was obtained at a current density of 10 mA cm^-2, when tetrametallic FeCoMnNi-MOF-74/NF is employed as both anode and cathode electrodes for the real water splitting. The present work potentially provides a new insight into prospecting and designing multivariate MOFs as a promising material for efficient electrocatalysis in the practical application.

Practical MOF Nanoarchitectonics: New Strategies for Enhancing the Processability of MOFs for Practical Applications

Over the past decades, the development of porous materials has directly or indirectly affected industrial production methods. Metal-organic frameworks (MOFs) as an emerging class of porous materials exhibit some unique advantages, including controllable composition, a large surface area, high porosity, and so on. These attractive characteristics of MOFs have led to their potential applications in energy storage and conversion devices, drug delivery, adsorption and storage, sensors, and other areas. However, powdered MOFs have limited practical applications owing to poor processability, safety hazards from dust formation, and poor recyclability. In addition, the inherent micro/mesoporosities of MOFs also reduce the accessibility and diffusion kinetics for large molecules. To improve their processability for practical applications, MOFs are often deposited as MOF layers or films (i.e., MOF-coated composites) on supporting materials or are formed into 3D structured composites, such as aerogels and hydrogels. In this article, we review recent researches on these MOF composites, including their synthetic methods and potential applications in energy storage devices, heavy metal ion adsorption, and water purification. Finally, the future outlook and challenges associated with the large-scale fabrication of MOF-based composites for practical applications are discussed.