Growth of Highly Active Amorphous RuCu Nanosheets on Cu Nanotubes for the Hydrogen Evolution Reaction in Wide pH Values

Ultrafast Quasi-Solid-State Microwave Construction of Spongy Cobalt-Molybdenum Phosphide for Hydrogen Production Over Wide pH Range

The developed strategies for synthesizing metal phosphides are usually cumbersome and pollute the environment. In this work, an ultrafast (30 s) quasi-solid-state microwave approach is developed to construct cobalt-molybdenum phosphide decorated with Ru (Ru/CoxP-MoP) featured porous morphology with interconnected channels. The specific nanostructure favors mass transport, such as electrolyte bubbles transfer and exposing rich active sites. Moreover, the coupling effects between metallic elements, especially the decorated Ru, also act as a pivotal role on enhancing the electrocatalytic performance. Benefiting from the effects of composition and specific nanostructure, the prepared Ru/CoxP-MoP exhibits efficient HER performance with a current density of 10 mA cm-2 achieved in 1 m KOH, 0.5 m H2SO4, seawater containing 1 m KOH and 1 m PBS, with overpotentials of 52, 59, 55, 90 mV, and coupling with good stability. This work opens a novel and fast avenue to design metal-phosphide-based nanomaterials in energy-conversion and storage fields.

Rapid Synthesis of Ruthenium-Copper Nanocomposites as High-Performance Bifunctional Electrocatalysts for Electrochemical Water Splitting

Development of high-performance, low-cost catalysts for electrochemical water splitting is key to sustainable hydrogen production. Herein, ultrafast synthesis of carbon-supported ruthenium-copper (RuCu/C) nanocomposites is reported by magnetic induction heating, where the rapid Joule's heating of RuCl3 and CuCl2 at 200 A for 10 s produces Ru-Cl residues-decorated Ru nanocrystals dispersed on a CuClx scaffold, featuring effective Ru to Cu charge transfer. Among the series, the RuCu/C-3 sample exhibits the best activity in 1 m KOH toward both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), with an overpotential of only -23 and +270 mV to reach 10 mA cm-2, respectively. When RuCu/C-3 is used as bifunctional catalysts for electrochemical water splitting, a low cell voltage of 1.53 V is needed to produce 10 mA cm-2, markedly better than that with a mixture of commercial Pt/C+RuO2 (1.59 V). In situ X-ray absorption spectroscopy measurements show that the bifunctional activity is due to reduction of the Ru-Cl residues at low electrode potentials that enriches metallic Ru and oxidation at high electrode potentials that facilitates the formation of amorphous RuOx. These findings highlight the unique potential of MIH in the ultrafast synthesis of high-performance catalysts for electrochemical water splitting.

Ru Regulated Electronic Structure of PdxCuy Nanosheets for Efficient Hydrogen Evolution Reaction in Wide pH Range

The development of highly effective catalysts for hydrogen evolution reaction (HER) in a wide pH range is crucial for the sustainable utilization of green energy utilization, while the slow kinetic reaction rate severely hinders the progress of HER. Herein, the reaction kinetic issue is solved by adjusting the electronic structure of the Ru/PdxCuy catalysts. The champion catalyst displays a remarkable performance for HER with the ultralow overpotential (27, 28, and 97 mV) in 1.0 m KOH, 0.5 m H2SO4, and 1.0 m PBS at 10 mA cm-2 and high the mass activity (3036 A g-1), respectively, superior to those of commercial Pt/C benchmarks and most of reported electrocatalysts, mainly due to its low reaction activation energy. Density functional theory (DFT) calculations indicate that Ru doping contributes an electron-deficient 3d band, which promotes water adsorption. Additionally, this also leads to an upward shift of the d-band center of Pd and a downward shift of the d-band center of Cu, further optimizing the adsorption/dissociation of H2O and H*. Results from this work may provide an insight into the design and synthesis of high-performance pH-universal HER electrocatalysts.

Phase Engineered CuxS-Ag2S with Photothermoelectric Activity for Enhanced Multienzyme Activity and Dynamic Therapy

The insufficient exposure sites and active site competition of multienzyme are the two main factors to hinder its therapeutic effect. Here, a phase-junction nanomaterial (amorphous-crystalline CuxS-Ag2S) is designed and prepared through a simple room temperature ion-exchange process. A small amount of Ag+ is added into Cu7S4 nanocrystals, which transforms Cu7S4 into amorphous phased CuxS and produces crystalline Ag2S simultaneously. In this structure, the overhanging bonds on the amorphous CuxS surface provide abundant active sites for optimizing the therapeutic activity. Meanwhile, the amorphous state enhances the photothermal effect through non-radiative relaxation, and due to its low thermal resistance, phase-junction CuxS-Ag2S forms a significant temperature gradient to unlock the optimized thermo-electrodynamic therapy. Furthermore, benefiting from the high asymmetry of the amorphous state, the material forms a spin-polarized state that can effectively inhibit electron-hole recombination. In this way, the thermoelectric effect can facilitate the enzyme-catalyzed cycle by providing electrons and holes, enabling an enhanced coupling of thermoelectric therapy with multienzyme activity, which induces excellent anti-tumor performance. More importantly, the catalytic process simulated by density-functional theory proves that Ag+ alleviates the burden on the Cu sites through favorable adsorption of O2 and prevents active site competition.

Vertically Stacked Amorphous Ir/Ru/Ir Oxide Nanosheets for Boosted Acidic Water Splitting

Integrating multiple functional components into vertically stacked heterostructures offers a prospective approach to manipulating the physicochemical properties of materials. The synthesis of vertically stacked heterogeneous noble metal oxides remains a challenge. Herein, we report a surface segregation approach to create vertically stacked amorphous Ir/Ru/Ir oxide nanosheets (NSs). Cross-sectional high-angle annular darkfield scanning transmission electron microscopy images demonstrate a three-layer heterostructure in the amorphous Ir/Ru/Ir oxide NSs, with IrOx layers located on the upper and lower surfaces, and a layer of RuOx sandwiched between the two IrOx layers. The vertically stacked heterostructure is a result of the diffusion of Ir atoms from the amorphous IrRuOx solid solution to the surface. The obtained A-Ir/Ru/Ir oxide NSs display an ultralow overpotential of 191 mV at 10 mA cm-2 toward acid oxygen evolution reaction and demonstrate excellent performance in a proton exchange membrane water electrolyzer, which requires only 1.63 V to achieve 1 A cm-2 at 60 °C, with virtually no activity decay observed after a 1300 h test.

Low-loaded Ru on hollow SnO2 for enhanced electrocatalytic hydrogen evolution

In response to the challenges of intermediate poisoning and the high cost of noble metal catalysts in the hydrogen evolution reaction (HER), we develop a Ru-doped SnO2 catalyst. This Ru-SnO2 catalyst has the characteristics of low Ru loading and a hollow structure, which endow it with good electrocatalytic activity and stability for the HER.

The synthesis and application of crystalline-amorphous hybrid materials

Crystalline-amorphous hybrid materials (CA-HMs) possess the merits of both pure crystalline and amorphous phases. Abundant dangling bonds, unsaturated coordination atoms, and isotropic structural features in the amorphous phase, as well as relatively high electronic conductivity and thermodynamic structural stability of the crystalline phase simultaneously take effect in CA-HMs. Furthermore, the atomic and bandgap mismatch at the CA-HM interface can introduce more defects as extra active sites, reservoirs for promoted catalytic and electrochemical performance, and induce built-in electric field for facile charge carrier transport. Motivated by these intriguing features, herein, we provide a comprehensive overview of CA-HMs on various aspects-from synthetic methods to multiple applications. Typical characteristics of CA-HMs are discussed at the beginning, followed by representative synthetic strategies of CA-HMs, including hydrothermal/solvothermal methods, deposition techniques, thermal adjustment, and templating methods. Diverse applications of CA-HMs, such as electrocatalysis, batteries, supercapacitors, mechanics, optoelectronics, and thermoelectrics along with underlying structure-property mechanisms are carefully elucidated. Finally, challenges and perspectives of CA-HMs are proposed with an aim to provide insights into the future development of CA-HMs.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

RuCu Nanosheets with Ultrahigh Nanozyme Activity for Chemodynamic Therapy

Nanoenzymes have been widely explored for chemodynamic therapy (CDT) in cancer treatment. However, poor catalytic efficiency of nanoenzymes, especially in the tumor microenvironment with insufficient H2 O2 and mild acidity, limits the effect of CDT. Herein, a new ultrathin RuCu nanosheet (NS) based nanoenzyme which has a large specific surface area and abundant channels and defects is developed. The RuCu NSs show superb catalytic efficiency for the oxidation of peroxidase substrate H2 O2 at a wide range of pH and their catalytic efficiency (kcat /Km = 177.2 m-1  s-1 ) is about 14.9 times higher than that of the single-atom catalyst FeN3 P. Besides being an efficient nanozyme as peroxidase, the RuCu NSs possess other two enzyme activities, not only disproportionating superoxide anion to produce H2 O2 but also consuming glutathione to keep a high concentration of H2 O2 in the tumor microenvironment for Fenton reaction. With these advantages, the RuCu NSs exhibit good performance to kill cancer cells and inhibit tumor growth in mice, demonstrating a promising potential as new CDT reagent.

Interfacial Engineering of Copper-Nickel Selenide Nanodendrites for Enhanced Overall Water Splitting in Alkali Condition

Fabricating heterogeneous interfaces is an effective approach to improve the intrinsic activity of noble-metal-free catalysts for water splitting. Herein, 3D copper-nickel selenide (CuNi@NiSe) nanodendrites with abundant heterointerfaces are constructed by a precise multi-step wet chemistry method. Notably, CuNi@NiSe only needs 293 and 41 mV at 10 mA cm-2 for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. Moreover, the assembled CuNi@NiSe system just requires 2.2 V at 1000 mA cm-2 in anion exchange membrane (AEM) electrolyzer, which is 2.0 times better than Pt/C//IrO2 . Mechanism studies reveal Cu defects on the Cu2-x Se surface boost the electron transfer between Cu atoms and Se atoms of Ni3 Se4 via Cu2-x Se/Ni3 Se4 interface, largely lowering the reaction barrier of rate-determining step for HER. Besides, the intrinsic activity of Ni atoms for in situ generated NiOOH is largely enhanced during OER because of the electron-modulating effect of Se atoms at Ni3 Se4 /NiOOH interface. The unique 3D structure also promotes the mass transfer during catalysis process. This work emphasizes the essential role of interfacial engineering for practical water splitting.

Design and Synthesis of Noble Metal-Based Alloy Electrocatalysts and Their Application in Hydrogen Evolution Reaction

Hydrogen energy is regarded as the ultimate energy source for future human society, and the preparation of hydrogen from water electrolysis is recognized as the most ideal way. One of the key factors to achieve large-scale hydrogen production by water splitting is the availability of highly active and stable electrocatalysts. Although non-precious metal electrocatalysts have made great strides in recent years, the best hydrogen evolution reaction (HER) electrocatalysts are still based on noble metals. Therefore, it is particularly important to improve the overall activity of the electrocatalysts while reducing the noble metals load. Alloying strategies can shoulder the burden of optimizing electrocatalysts cost and improving electrocatalysts performance. With this in mind, recent work on the application of noble metal-based alloy electrocatalysts in the field of hydrogen production from water electrolysis is summarized. In this review, first, the mechanism of HER is described; then, the current development of synthesis methods for alloy electrocatalysts is presented; finally, an example analysis of practical application studies on alloy electrocatalysts in hydrogen production is presented. In addition, at the end of this review, the prospects, opportunities, and challenges facing noble metal-based alloy electrocatalysts are tried to discuss.

Pt-functionalized Amorphous RuOx as Excellent Stability and High-activity Catalysts for Low Temperature MEMS Sensors

The unsaturated coordination and abundant active sites endow amorphous metals with tremendous potential in improving metal oxide semiconductors' gas-sensing properties. However, the amorphous materials maintain the metastable status and easily transfer into the lower-active crystals during the gas-sensing process at high working temperatures, significantly limiting their further applications. Here, a bimetal amorphous PtRu catalyst is developed by accurately regulating the introduction of Pt species into amorphous RuOx supports to realize the highly active and stable H2 S gas-sensing detection. It is found that incorporation of low-concentration Pt species can effectively maintain the amorphous state of initial RuOx and delay the crystallization temperature as high as 100 °C. Further, ex situ XPS and in situ Raman spectroscopy analysis confirm that active Pt species can facilitate H2 S adsorption by strong Pt-S coordination and dissociate the sulfur species to the surrounding support, which contribute to the chemisorption and sensitization of H2 S. Meanwhile, electron transport at the interface between Pt, RuOx and ZnO further activates the reaction process at the surface of the gas-sensitive material. The final PtRu-modified ZnO (PtRu/ZnO) sensor enables the detection of H2 S in the ultra-low concentration range of 15-2000 ppb with remarkable stability.

Molten salt induced formation of chitosan based carbon nanosheets decorated with CoNx for boosting rechargeable Zn-air batteries

The earth-abundant, low-cost, and efficient oxygen electrode materials offer a potential opportunity to satisfy the large-scale production and application of metal-air batteries. Herein, a molten salt-assisted strategy is developed to anchor transition metal-based active sites via in-situ confining into porous carbon nanosheet. As a result, a chitosan-based porous nitrogen-doped nanosheet decorated with the well-defined CoN_x (CoN_x/CPCN) was reported. Both structural characterization and electrocatalytic mechanisms demonstrate a prominent synergetic effect between CoN_x and porous nitrogen-doped carbon nanosheets forcefully accelerates the sluggish reaction kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Interestingly, the Zn-air batteries (ZABs) equipped with CoN_x/CPCN-900 as an air electrode shows outstanding durability for 750 discharge/charge cycles, a high power density of 189.9 mW cm^-2, and a high gravimetric energy density of 1018.7 mWh g^-1 at 10 mA cm^-2. Furthermore, the assembled all-solid cell displays exceptional flexibility and power density (122.2 mW cm^-2).

Nanoarchitectonics of Metallene Materials for Electrocatalysis

Controlling the synthesis of metal nanostructures is one approach for catalyst engineering and performance optimization in electrocatalysis. As an emerging class of unconventional electrocatalysts, two-dimensional (2D) metallene electrocatalysts with ultrathin sheet-like morphology have gained ever-growing attention and exhibited superior performance in electrocatalysis owing to their distinctive properties originating from structural anisotropy, rich surface chemistry, and efficient mass diffusion capability. Many significant advances in synthetic methods and electrocatalytic applications for 2D metallenes have been obtained in recent years. Therefore, an in-depth review summarizing the progress in developing 2D metallenes for electrochemical applications is highly needed. Unlike most reported reviews on the 2D metallenes, this review starts by introducing the preparation of 2D metallenes based on the classification of the metals (e.g., noble metals, and non-noble metals) instead of synthetic methods. Some typical strategies for preparing each kind of metal are enumerated in detail. Then, the utilization of 2D metallenes in electrocatalytic applications, especially in the electrocatalytic conversion reactions, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, fuel oxidation reaction, CO₂ reduction reaction, and N₂ reduction reaction, are comprehensively discussed. Finally, current challenges and opportunities for future research on metallenes in electrochemical energy conversion are proposed.

Engineering a Heterophase Interface by Tailoring the Pt Coverage Density on an Amorphous Ru Surface for Ultrasensitive H2S Detection

Amorphous/crystalline heterophase engineering is emerging as an attractive strategy to adjust the properties and functions of nanomaterials. Here, we reveal a heterophase interface role by precisely tailoring the crystalline Pt coverage density on an amorphous Ru surface (cPt/aRu) for ultrasensitive H2S detection. We found that when the atomic ratio of Pt/Ru increased from 10 to 50%, the loading modes of Pt changed from island coverage (1cPt/aRu) to cross-linkable coverage (3cPt/aRu) and further to dense coverage (5cPt/aRu). The differences in coverage models further regulate the chemical adsorption of H2S on Pt and the electronic transformation process on Ru, which can be proved by ex situ X-ray photoelectron spectroscopy experiments. Notably, a special cross-linkable coverage 3cPt/aRu on ZnO shows the best gas-sensitive performance, in which the operating temperature reduces from 240 to 160 °C compared with pristine ZnO and the selectivity coefficient for H2S gas improves from ∼1.2 to ∼4.6. This is mainly benefit from the maximized exposure of the amorphous/crystalline heterophase interface. Our work thus provides a new platform for future applications of amorphous/crystalline heterogeneous nanostructures in gas sensors and catalysis.

Engineering Amorphous/Crystalline Ru(OH)3/CoFe-Layered Double Hydroxide for Hydrogen Evolution at 1000 mA cm-2

For large-scale industrial applications, it is highly desirable to create effective, economical electrocatalysts with long-term stability for the hydrogen evolution reaction (HER) at a large current density. Herein, we report a unique motif with crystalline CoFe-layered hydroxide (CoFe-LDH) nanosheets enclosed by amorphous ruthenium hydroxide (a-Ru(OH)₃/CoFe-LDH) to realize the efficient hydrogen production at 1000 mA cm^-2, with a low overpotential of 178 mV in alkaline media. During the continuous HER process for 40 h at such a large current density, the potential remains almost constant with only slight fluctuations, indicating good long-term stability. The remarkable HER performance can be attributed to the charge redistribution caused by abundant oxygen vacancies in a-Ru(OH)₃/CoFe-LDH. The increased electron density of states lowers the charge-transfer resistance and promotes the formation and release of H₂ molecules. The water-splitting electrolyzer with a-Ru(OH)₃/CoFe-LDH as both an anode and a cathode in 1.0 M KOH demonstrates stable hydrogen production and a 100% faradic efficiency. The design strategy of interface engineering in this work will inspire the design of practical electrocatalysts for water splitting on an industrial scale.

Sea urchin-like amorphous MgNiCo mixed metal hydroxide nanoarrays for efficient overall water splitting under industrial electrolytic conditions

Exploring amorphous mixed transition metal hydroxide electrocatalysts with high performance and stability for overall water splitting is a difficult challenge under industrial electrolytic conditions. Herein, a sea urchin-like amorphous MgNiCo hydroxide (Mg_xNi_1-xCo-OH, 0 < x < 1), self-assembled from nanowire arrays, is synthesized by the hydrothermal process. The synergistic effect between Mg and Ni/Co adjusts their crystal structure and morphology, which can improve the inherent activity and provide more active sites. Benefiting from the favorable structural features, Mg_0.5Ni_0.5Co-OH exhibits superior electrocatalytic oxygen and hydrogen evolution reaction (OER and HER) activity with a low overpotential of 277 and 110 mV (10 mA cm^-2) in 1 M KOH at 25 °C. Furthermore, overpotentials of 239 and 197 mV are required to achieve a current density of 50 mA cm^-2 for the OER and HER under simulated industrial electrolysis conditions (5 M KOH at 65 °C). Notably, Mg_0.5Ni_0.5Co-OH remarkably accelerates water splitting with a low voltage of 1.938 and 1.699 V for 50 mA cm^-2 in 1 M KOH at 25 °C and 5 M KOH at 65 °C, respectively. This work presents a novel amorphous strategy to design and construct sea urchin-like mixed metal hydroxide bifunctional efficient electrocatalysts for industrial applications.

Research Advances in Amorphous-Crystalline Heterostructures Toward Efficient Electrochemical Applications

Interface engineering of heterostructures has proven a promising strategy to effectively modulate their physicochemical properties and further improve the electrochemical performance for various applications. In this context related research of the newly proposed amorphous-crystalline heterostructures have lately surged since they combine the superior advantages of amorphous- and crystalline-phase structures, showing unusual atomic arrangements in heterointerfaces. Nonetheless, there has been much less efforts in systematic analysis and summary of the amorphous-crystalline heterostructures to examine their complicated interfacial interactions and elusory active sites. The critical structure-activity correlation and electrocatalytic mechanism remain rather elusive. In this review, the recent advances of amorphous-crystalline heterostructures in electrochemical energy conversion and storage fields are amply discussed and presented, along with remarks on the challenges and perspectives. Initially, the fundamental characteristics of amorphous-crystalline heterostructures are introduced to provide scientific viewpoints for structural understanding. Subsequently, the superiorities and current achievements of amorphous-crystalline heterostructures as highly efficient electrocatalysts/electrodes for hydrogen evolution reaction, oxygen evolution reaction, supercapacitor, lithium-ion battery, and lithium-sulfur battery applications are elaborated. At the end of this review, future outlooks and opportunities on amorphous-crystalline heterostructures are also put forward to promote their further development and application in the field of clean energy.

Strategies for Promoting Catalytic Performance of Ru-based Electrocatalysts towards Oxygen/Hydrogen Evolution Reaction

Ru-based materials hold great promise for substituting Pt as potential electrocatalysts toward water electrolysis. Significant progress is made in the fabrication of advanced Ru-based electrocatalysts, but an in-depth understanding of the engineering methods and induced effects is still in their early stage. Herein, we organize a review that focusing on the engineering strategies toward the substantial improvement in electrocatalytic OER and HER performance of Ru-based catalysts, including geometric structure, interface, phase, electronic structure, size, and multicomponent engineering. Subsequently, the induced enhancement in catalytic performance by these engineering strategies are also elucidated. Furthermore, some representative Ru-based electrocatalysts for the electrocatalytic HER and OER applications are also well presented. Finally, the challenges and prospects are also elaborated for the future synthesis of more effective Ru-based catalysts and boost their future application.

Facile synthesis of defect-rich RuCu nanoflowers for efficient hydrogen evolution reaction in alkaline media

Developing high-performance electrocatalysts toward hydrogen evolution reaction (HER) in alkaline media is highly desirable for industrial applications in the field of water splitting but is still challenging. Herein, we successfully synthesized RuCu nanoflowers (NFs) with tunable atomic ratios using a facile wet chemistry method. The Ru₃Cu NFs need only 55 mV to achieve a current density of 10 mA cm^-2, which shows ideal durability with only 4 mV decay after 2000 cycles, largely outperforming the catalytic properties of commercial Pt/C. The Ru₃Cu NFs comprise many nanosheets that can provide more active sites for HER. In addition, the introduction of Cu can modulate the electronic structure of Ru, facilitate water dissociation, and optimize H adsorption/desorption ability. Thus, the flower-like structure together with the proper incorporation of Cu boosts HER performance.

Hydrogen evolution reaction catalysis on RuM (M = Ni, Co) porous nanorods by cation etching

The development of efficient and stable nanomaterial electrocatalysts for the hydrogen evolution reaction (HER) is of great significance for renewable energy conversion via water electrolysis. Herein, we have developed a novel class of bimetallic RuM (M = Ni, Co) hollow nanorods (HNRs) through a facile Fe³⁺ etching strategy, as electrocatalysts for enhancing the HER. Morphological physical characterization and electrochemical tests demonstrated that RuM (M = Ni, Co) HNRs with hollow structures can effectively enhance electrocatalytic activity due to their high specific surface areas. Impressively, the RuNi HNRs exhibited superior HER performance with an overpotential of merely 25.6 mV in 1 M KOH solution at 10 mA cm^-2, which is significantly lower than that of commercial Pt/C (44.7 mV). Moreover, the as prepared RuNi HNRs showed excellent stability and could continuously work at a current density of 10 mA cm^-2 for 40 h with a negligible increase in potential. The Ru-based HNRs also showed high HER activity in an acidic solution. This study paves a new way for the universal fabrication of bimetallic hollow structured nanomaterials as efficient electrocatalysts for boosting the HER.

Synergistic effects boost electrocatalytic reduction of bromate on supported bimetallic Ru-Cu catalyst

Bromate is a commonly identified carcinogenic and genotoxic disinfection byproduct in water. In the present work, bimetallic Ru-Cu catalyst supported on carbon nanotube (RuCu/CNT) was prepared and the structural properties of the catalysts were characterized. The results show that the presence of Ru enhances the dispersion and reduction of Cu particles in the RuCu/CNT catalyst in comparison with the monometallic Cu catalyst supported on CNT (Cu/CNT). For electrocatalytic reaction on Cu/CNT, bromate is reduced on metallic Cu surface via a redox process. For Ru/CNT, highly active H* radicals are generated on metallic Ru surface via the Volmer process and are used for bromate reduction. As for the RuCu/CNT, bromate is reduced through two main pathways, including direct redox reaction on metallic Cu and indirect reduction by active H* radicals on Ru surface. Accordingly, RuCu/CNT exhibits the highest catalytic activity, ascribed to the synergistic effect between metallic Ru and Cu. Furthermore, the bimetallic catalyst displays much higher catalytic efficiency as compared with previously reported results. The pH, initial bromate concentration, in-situ electrochemical reduction of the electrodes and working potential have strong impacts on the removal efficiency of bromate on RuCu/CNT.

Ethanol-Induced Hydrogen Insertion in Ultrafine IrPdH Boosts pH-Universal Hydrogen Evolution

Engineering Pt-free catalysts for hydrogen evolution reaction (HER) with high activity and stability is of great significance in electrochemical hydrogen production. Herein, in situ chemical H intercalation into ultrafine Pd to activate this otherwise HER-inferior material to form the ultrafine IrPdH hydride as an efficient and stable HER electrocatalyst is proposed. The formation of PdIrH depends on a new hydrogenation strategy via using ethanol as the hydrogen resource. It is demonstrated that H atoms in IrPdH originate from the OH and CH₂  of ethanol, which fills the gap of ethanol as the hydrogen source for the preparation of Pd hydride. Thanks to the incorporation of H/Ir atoms and ultrafine structure, the IrPdH exhibits superior HER activity and stability in the whole pH range. The IrPdH delivers very low overpotentials of 14, 25 and 60 mV at a current density of 10 mA cm^-2 respectively in 0.5 m H₂ SO₄ , 1 m KOH, and 1 m PBS electrolytes, which are much better than those of commercial Pt/C and most reported noble metal electrocatalysts. Theoretical calculations confirm that interstitial hydrogen availably refines the electronic density of Pd and Ir sites, which optimizes the adsorption of *H and leads to the significant enhancement of HER performance.

Protrusion-Rich Cu@NiRu Core@shell Nanotubes for Efficient Alkaline Hydrogen Evolution Electrocatalysis

The development of highly efficient and durable water electrolysis catalysts plays an important role in the large-scale applications of hydrogen energy. In this work, protrusion-rich Cu@NiRu core@shell nanotubes are prepared by a facile wet chemistry method and used for catalyzing hydrogen evolution reaction (HER) in an alkaline environment. The protrusion-like RuNi alloy shells with accessible channels and abundant defects possess a large surface area and can optimize the surface electronic structure through the electron transfer from Ni to Ru. Moreover, the unique 1D hollow structure can effectively stabilize RuNi alloy shell through preventing the aggregation of nanoparticles. The synthesized catalyst can achieve a current density of 10 mA cm^-2 in 1.0 m KOH with an overpotential of only 22 mV and show excellent stability after 5000 cycles, which is superior to most reported Ru-based catalysts. Density functional theory calculations illustrate that the weakened hydrogen adsorption on Ru sites induced by the alloying with Ni and active electron transfer between Ru and Ni/Cu are the keys to the much improved HER activity.

Synergistically Coupled CoMo/CoMoP Electrocatalyst for Highly Efficient and Stable Overall Water Splitting

Finding reservoir-rich and efficient bifunctional electrocatalysts for water splitting is key to further sustainable energy development. Transition metal phosphides (TMPs) are extensively exploited as effective electrocatalysts, but the construction of strong coupling interfaces to improve catalytic performance by simple methods is still a bottleneck. Here, we designed and prepared a novel heterostructure electrocatalyst composed of cobalt-molybdenum (CoMo) alloy particles integrated with CoMoP nanosheets via the method of template-assisted conversion, followed by electrodeposition. Thanks to the strong interfacial coupling and synergistic effect between CoMo alloy particles and CoMoP nanosheets, the prepared CoMo/CoMoP/NF shows outstanding activity with overpotentials of only 29 mV for the hydrogen evolution reaction (HER) and 246 mV for the oxygen evolution reaction (OER) in 1 M KOH at a current density of 10 mA cm^-2. Furthermore, the assembled CoMo/CoMoP || CoMo/CoMoP electrode can attain 10 mA cm^-2 with a low battery voltage of 1.54 V. This study offers a valuable reference to the construction of bimetallic alloy/bimetallic phosphide heterostructure electrocatalysts, which applies to the large-scale application of electrocatalytic energy conversion technology.

Defect-Assisted Anchoring of Pt Single Atoms on MoS2 Nanosheets Produces High-Performance Catalyst for Industrial Hydrogen Evolution Reaction

Pt-based catalysts are currently the most efficient electrocatalysts for the hydrogen evolution reaction (HER), but the scarcity and high cost of Pt limit industrial applications. Downsizing Pt nanoparticles (NPs) to single atoms (SAs) can expose more active sites and increase atomic utilization, thus decreasing the cost. Here, a solar-irradiation strategy is used to prepare hybrid SA-Pt/MoS₂ nanosheets (NSs) that demonstrate excellent HER activity (the overpotential at a current density of 10 mA cm^-2 (η₁₀ ) of 44 mV, and Tafel slope of 34.83 mV dec^-1 in acidic media; η₁₀ of 123 mV, and Tafel slope of 76.71 mV dec^-1 in alkaline media). Defects and deformations introduced by thermal pretreatment of the hydrothermal MoS₂ NSs promote anchoring and stability of Pt SAs. The fabrication of Pt SAs and NPs is easily controlled using different Pt-precursor concentrations. Moreover, SA-Pt/MoS₂ produced under natural sunlight exhibits high HER performance (η₁₀ of 55 mV, and Tafel slope of 43.54 mV dec^-1 ), which indicates its viability for mass production. Theoretical simulations show that Pt improves the absorption of H atoms and the charge-transfer kinetics of MoS₂ , which significantly enhance HER activity. A simple, inexpensive strategy for preparing SA-Pt/MoS₂ hybrid catalysts for industrial HER is provided.

Metal and metal oxide amorphous nanomaterials towards electrochemical applications

Amorphous nanomaterials have aroused extensive interest due to their unique properties. Their performance is highly related with their distinct atomic arrangements, which have no long-range order but possess short- to medium-range order. Herein, an overview of state-of-the-art synthesis methods of amorphous nanomaterials, structural characteristics and their electrochemical properties is presented. Advanced characterization methods for analyzing and proving the local order of amorphous structures, such as X-ray absorption fine structure spectroscopy, atomic electron tomography and nanobeam electron diffraction, are introduced. Various synthesis strategies for amorphous nanomaterials are covered, especially the salt-assisted metal organic decomposition method to prepare ultrathin amorphous nanosheets. Furthermore, the design and structure-activity relationship of amorphous nanomaterials towards electrochemical applications, including electrocatalysts and battery anode/cathode materials, is discussed.

Manipulation on Two-Dimensional Amorphous Nanomaterials for Enhanced Electrochemical Energy Storage and Conversion

Low-carbon society is calling for advanced electrochemical energy storage and conversion systems and techniques, in which functional electrode materials are a core factor. As a new member of the material family, two-dimensional amorphous nanomaterials (2D ANMs) are booming gradually and show promising application prospects in electrochemical fields for extended specific surface area, abundant active sites, tunable electron states, and faster ion transport capacity. Specifically, their flexible structures provide significant adjustment room that allows readily and desirable modification. Recent advances have witnessed omnifarious manipulation means on 2D ANMs for enhanced electrochemical performance. Here, this review is devoted to collecting and summarizing the manipulation strategies of 2D ANMs in terms of component interaction and geometric configuration design, expecting to promote the controllable development of such a new class of nanomaterial. Our view covers the 2D ANMs applied in electrochemical fields, including battery, supercapacitor, and electrocatalysis, meanwhile we also clarify the relationship between manipulation manner and beneficial effect on electrochemical properties. Finally, we conclude the review with our personal insights and provide an outlook for more effective manipulation ways on functional and practical 2D ANMs.

Construction of Dual-Site Atomically Dispersed Electrocatalysts with Ru-C5 Single Atoms and Ru-O4 Nanoclusters for Accelerated Alkali Hydrogen Evolution

Rationally integrating multi-active sites into one ideal catalyst is an effective approach to accelerate multistep reactions by synergic catalysis. Herein, a universal and facile room temperature impregnation strategy is developed to construct Ru atomically dispersed catalyst (Ru ADC) with Ru-C₅ single atoms and Ru oxide nanoclusters (≈1.5 nm), which can also be extended to prepare Ir, Rh, Pt, Au, and Mo atomically dispersed catalysts (ADCs). It is found that the obtained Ru ADC largely boosts alkali hydrogen evolution by concerted catalysis between single atoms and sub-nanoclusters, which only needs an overpotential of 18 mV at 10 mA cm^-2 . Further mechanistic studies reveal that Ru-C₅ single atoms and Ru oxide nanoclusters with Ru-O₄ configuration in one catalyst can synergically boost water molecule capture, water dissociation, and hydrogen release. This study opens up a simple method to synthesize dual-site metal ADCs for synergic catalysis of typical multistep reactions.

Engineering Ruthenium-Based Electrocatalysts for Effective Hydrogen Evolution Reaction

The investigation of highly effective, durable, and cost-effective electrocatalysts for the hydrogen evolution reaction (HER) is a prerequisite for the upcoming hydrogen energy society. To establish a new hydrogen energy system and gradually replace the traditional fossil-based energy, electrochemical water-splitting is considered the most promising, environmentally friendly, and efficient way to produce pure hydrogen. Compared with the commonly used platinum (Pt)-based catalysts, ruthenium (Ru) is expected to be a good alternative because of its similar hydrogen bonding energy, lower water decomposition barrier, and considerably lower price. Analyzing and revealing the HER mechanisms, as well as identifying a rational design of Ru-based HER catalysts with desirable activity and stability is indispensable. In this review, the research progress on HER electrocatalysts and the relevant describing parameters for HER performance are briefly introduced. Moreover, four major strategies to improve the performance of Ru-based electrocatalysts, including electronic effect modulation, support engineering, structure design, and maximum utilization (single atom) are discussed. Finally, the challenges, solutions and prospects are highlighted to prompt the practical applications of Ru-based electrocatalysts for HER.