Metalation of Catechol-Functionalized Defective Covalent Organic Frameworks for Lewis Acid Catalysis

Designing Heterocyclic Covalent Organic Frameworks with Tunable Electronic Structures for Efficient Electrosynthesis of Hydrogen Peroxide

The electrocatalytic production of hydrogen peroxide (H2O2) through the two-electron oxygen reduction reaction (2e- ORR) has garnered significant research attention in recent years due to its numerous appealing advantages, such as being eco-friendly and exhibiting high energy conversion efficiency. Metal-free carbon materials with specific catalytic sites have been recognized as potential electrocatalysts for 2e- ORR; however, the design of highly efficient catalysts with well-defined structures and long-term stability for large-scale H2O2 production remains unsatisfactory. In this study, three covalent organic frameworks (COFs) - imine-linked LZU-1, oxazole-linked LZU-190, and thiazole-linked LZU-190(S), are successfully synthesized to explore their catalytic activity in electrocatalytic H2O2 production. Among these, the carbon sites LZU-190(S) are predominantly activated by the introduced adjacent heteroatoms via electronic effects, resulting in much higher H2O2 selectivity compared to the oxazole and imine linkages. This work provides new insights into developing COFs-based electrocatalysts for efficient H2O2 generation.

Nitrogen-Rich Conjugated Microporous Polymers with Improved Cobalt(II) Density for Highly Efficient Electrocatalytic Oxygen Evolution

Developing efficient oxygen evolution catalysts (OECs) made from earth-abundant elements is extremely important since the oxygen evolution reaction (OER) with sluggish kinetics hinders the development of many energy-related electrochemical devices. Herein, an efficient strategy is developed to prepare conjugated microporous polymers (CMPs) with abundant and uniform coordination sites by coupling the N-rich organic monomer 2,4,6-tris(5-bromopyrimidin-2-yl)-1,3,5-triazine (TBPT) with Co(II) porphyrin. The resulting CMP-Py(Co) is further metallized with Co2+ ions to obtain CMP-Py(Co)@Co. Structural characterization results reveal that CMP-Py(Co)@Co has higher Co2+ content (12.20 wt %) and affinity toward water compared with CMP-Py(Co). Moreover, CMP-Py(Co)@Co exhibits an excellent OER activity with a low overpotential of 285 mV vs RHE at 10 mA cm-2 and a Tafel slope of 80.1 mV dec-1, which are significantly lower than those of CMP-Py(Co) (335 mV vs RHE and 96.8 mV dec-1). More interestingly, CMP-Py(Co)@Co outperforms most reported porous organic polymer-based OECs and the benchmark RuO2 catalyst (320 mV vs RHE and 87.6 mV dec-1). Additionally, Co2+-free CMP-Py(2H) has negligible OER activity. Thereby, the enhanced OER activity of CMP-Py(Co)@Co is attributed to the incorporation of Co2+ ions leading to rich active sites and enlarged electrochemical surface areas. Density functional theory (DFT) calculations reveal that Co2+-TBPT sites have higher activity than Co2+-porphyrin sites for the OER. These results indicate that the introduction of rich active metal sites in stable and conductive CMPs could provide novel guidance for designing efficient OECs.

Covalent Organic Frameworks: Opportunities for Rational Materials Design in Cancer Therapy

Nanomedicines are extensively used in cancer therapy. Covalent organic frameworks (COFs) are crystalline organic porous materials with several benefits for cancer therapy, including porosity, design flexibility, functionalizability, and biocompatibility. This review examines the use of COFs in cancer therapy from the perspective of reticular chemistry and function-oriented materials design. First, the modification sites and functionalization methods of COFs are discussed, followed by their potential as multifunctional nanoplatforms for tumor targeting, imaging, and therapy by integrating functional components. Finally, some challenges in the clinical translation of COFs are presented with the hope of promoting the development of COF-based anticancer nanomedicines and bringing COFs closer to clinical trials.

Rational design of MOF@COF composites with multi-site functional groups for enhanced elimination of U(VI) from aqueous solution

Both environment and human beings were menaced by the widespread application of radioactive uranium, high-performance and effective elimination of uranium from wastewater is of important meaning for development of environmental sustainability in the future. In this study, the water-stable MOF material and the highly crystalline COF were compounded by a mild hydrothermal strategy, which achieved efficient removal of U(VI) through the synergistic effect. The composites showed the characteristics of both COFs and MOFs, which will possess higher stability, larger surface area and faster adsorption efficiency that cannot be carried out by a single component. Batch experiments and characterizations (SEM, TEM, XRD, FT-IR, BET, XPS, etc.) indicated that UiO-66-NH2@LZU1 had more stable and multi-layer pore structure and rich active functional groups. The Langmuir model and the pseudo-second-order kinetics fitting was more suitable for the U(VI) elimination process. The greatest uranium adsorbing capacity of UiO-66-NH2@LZU1 (180.4 mg g-1) was observed to exceed the UiO-66-NH2 (108.8 mg g-1) and COF-LZU1 (65.8 mg g-1), which reached the excellent hybrid effects. Furthermore, FT-IR and XPS analyses confirmed that the most nitrogen-containing group from COF-LZU1 and oxygen-containing group of UiO-66-NH2 could be combined with U(VI). In addition, electrostatic interaction was also a mechanism during the removal process. This work displayed that UiO-66-NH2@LZU1 was a prospective hybrid material for radioactive waste remediation. The compound method and application mentioned in this work had provided a theoretical basis for designing and developing multi-functional composite adsorbents, which contributed to the development of new materials for radioactive wastewater treatment technologies.

Continuous Covalent Organic Frameworks Membranes: From Preparation Strategies to Applications

Covalent organic frameworks (COFs) are porous crystalline polymeric materials formed by the covalent bonding of organic units. The abundant organic units library gives the COFs species diversity, easily tuned pore channels, and pore sizes. In addition, the periodic arrangement of organic units endows COFs regular and highly connected pore channels, which has led to the rapid development of COFs in membrane separations. Continuous defect-free and high crystallinity of COF membranes is the key to their application in separations, which is the most important issue to be addressed in the research. This review article describes the linkage types of covalent bonds, synthesis methods, and pore size regulation strategies of COFs materials. Further, the preparation strategies of continuous COFs membranes are highlighted, including layer-by-layer (LBL) stacking, in situ growth, interfacial polymerization (IP), and solvent casting. The applications in separation fields of continuous COFs membranes are also discussed, including gas separation, water treatment, organic solvent nanofiltration, ion conduction, and energy battery membranes. Finally, the research results are summarized and the future prospect for the development of COFs membranes are outlined. More attention may be paid to the large-scale preparation of COFs membranes and the development of conductive COFs membranes in future research.

Post-synthetic modifications of covalent organic frameworks (COFs) for diverse applications

Covalent organic frameworks (COFs) are porous and crystalline organic polymers, which have found usage in various fields. These frameworks are tailorable through the introduction of diverse functionalities into the platform. Indeed, functionality plays a key role in their different applications. However, sometimes functional groups are not compatible with reaction conditions or can compete and interfere with other groups of monomers in the direct synthetic method. Also, pre-synthesis of bulky moieties in COFs can negatively affect crystal formation. To avoid these problems a post-synthetic modification (PSM) approach is a helpful tactic. Also, with the assistance of this strategy porous size can be tunable and stability can be improved without considerable effect on the crystallite. In addition, conductivity, hydrophobicity/ hydrophilicity, and chirality are among the features that can be reformed with this method. In this review, different types of PSM strategies based on recent articles have been divided into four categories: (i) post-functionalization, (ii) post-metalation, (iii) chemical locking, and (iv) host-guest post-modifications. Post-functionalization and chemical locking methods are based on covalent bond formation while in post-metalation and host-guest post-modifications, non-covalent bonds are formed. Also, the potential of these post-modified COFs in energy storage and conversion (lithium-sulfur batteries, hydrogen storage, proton-exchange membrane fuel cells, and water splitting), heterogeneous catalysts, food safety evaluation, gas separation, environmental domains (greenhouse gas capture, radioactive element uptake, and water remediation), and biological applications (drug delivery, biosensors, biomarker capture, chiral column chromatography, and solid-state smart nanochannels) have been discussed.

Removal of p-Nitrophenol by Adsorption with 2-Phenylimidazole-Modified ZIF-8

Petrochemical wastewater contains p-nitrophenol, a highly toxic, bioaccumulative and persistent pollutant that can harm ecosystems and environmental sustainability. In this study, ZIF-8-PhIm was prepared for p-nitrophenol removal from petrochemical wastewater using solvent-assisted ligand exchange (SALE) with 2-phenylimidazole(2-PhIm). The ZIF-8-PhIm's composition and structure were characterised using the XRD, SEM, FT-IR, ¹H NMR, XPS and BET methods. The adsorption effect of ZIF-8-PhIm on p-nitrophenol was investigated with the static adsorption method. Compared to the ZIF-8 materials, ZIF-8-PhIm exhibited stronger π-π interactions, produced a multistage pore structure with larger pore capacity and size, and had increased hydrophilicity and exposure of adsorption sites. Under optimised conditions (dose = 0.4 g/L, T = 298 K, C₀ = 400 mg/L), ZIF-8-PhIm achieved an adsorption amount of 828.29 mg/g, which had a greater p-nitrophenol adsorption capacity compared to the ZIF-8 material. The Langmuir isotherm and pseudo-second-order kinetic models appropriately described the p-nitrophenol adsorption of ZIF-8-PhIm. Hydrogen bonding and π-π interactions dominated the p-nitrophenol adsorption of ZIF-8-PhIm. It also had relatively good regeneration properties.

Monomer Symmetry-Regulated Defect Engineering: In Situ Preparation of Functionalized Covalent Organic Frameworks for Highly Efficient Capture and Separation of Carbon Dioxide

Developing crystalline porous materials with highly efficient CO₂ selective adsorption capacity is one of the key challenges to carbon capture and storage (CCS). In current studies, much more attention has been paid to the crystalline and porous properties of crystalline porous materials for CCS, while the defects, which are unavoidable and ubiquitous, are relatively neglected. Herein, for the first time, we propose a monomer-symmetry regulation strategy for directional defect release to achieve in situ functionalization of COFs while exposing uniformly distributed defect-aldehyde groups as functionalization sites for selective CO₂ capture. The regulated defective COFs possess high crystallinity, good structural stability, and a large number of organized and functionalized aldehyde sites, which exhibit one of the highest selective separation values of all COF sorbing materials in CO₂/N₂ selective adsorption (128.9 cm³/g at 273 K and 1 bar, selectivity: 45.8 from IAST). This work not only provides a new strategy for defect regulation and in situ functionalization of COFs but also provides a valuable approach in the design and preparation of new adsorbents for CO₂ adsorption and CO₂/N₂ selective separation.

Linker Engineering of 2D Imine Covalent Organic Frameworks for the Heterogeneous Palladium-Catalyzed Suzuki Coupling Reaction

Covalent organic frameworks (COFs) are an emerging class of porous organic polymers that have been utilized as scaffolds for anchoring metal active species to act as heterogeneous catalysts. Though several examples of such COFs exist, a thorough experimental and computational analysis on such catalysts is limited. In this work, a series of two-dimensional (2D) imine COFs (TTA-DFB COF (N), TTA-TBD COF (N∧O), and TTA-DFP COF(N∧N)) were synthesized by using suitable building units to obtain three different coordination sites (N, N∧O, and N∧N). These were post-modified with Pd(II) to catalyze the Suzuki-Miyaura coupling reaction. Pd@TTA-DFB COF, where Pd(II) was coordinated to N sites, showed the fastest reactivity and lower stability. Pd@TTA-DFP COF showed highest stability but slowest reactivity. Pd@TTA-TBD COF was the best among the three with both high stability and fast reactivity. By combining both experimental and computational results, we conclude that the Pd(II) to Pd(0) reduction is a key step in the difference between the catalytic reactivities of the three COFs. This study demonstrates the importance of the building block approach to design COFs for efficient heterogeneous catalysis and to understand the fate of the reaction profile.

Molecular identification and quantification of defect sites in metal-organic frameworks with NMR probe molecules

The defects in metal-organic frameworks (MOFs) can dramatically alter their pore structure and chemical properties. However, it has been a great challenge to characterize the molecular structure of defects, especially when the defects are distributed irregularly in the lattice. In this work, we applied a characterization strategy based on solid-state nuclear magnetic resonance (NMR) to assess the chemistry of defects. This strategy takes advantage of the coordination-sensitive phosphorus probe molecules, e.g., trimethylphosphine (TMP) and trimethylphosphine oxide (TMPO), that can distinguish the subtle differences in the acidity of defects. A variety of local chemical environments have been identified in defective and ideal MOF lattices. The geometric dimension of defects can also be evaluated by using the homologs of probe molecules with different sizes. In addition, our method provides a reliable way to quantify the density of defect sites, which comes together with the molecular details of local pore environments. The comprehensive solid-state NMR strategy can be of great value for a better understanding of MOF structures and for guiding the design of MOFs with desired catalytic or adsorption properties.

Defects in porous materials can alter the pore structure and chemical properties. Here authors demonstrate an approach for studying defects in metal-organic frameworks using ³¹P NMR and probe molecules.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

Pillar[5]arene-Integrated Three-Dimensional Framework Polymers for Macrocycle-Induced Size-Selective Catalysis

Size-selective catalysis is of key importance in the conversion of crude oil or biomass. Here, we fabricate three pillar[5]arene-integrated porous organic polymers with three-dimensional (3D) network structures using 3D cross-linkers. The resulting polymers possess a high surface-to-mass ratio and exhibit exceptional size-selective catalysis in Knoevenagel condensation reactions. In addition, a mechanistic study indicates that the size-selective catalysis is due to the host-guest interaction between pillar[5]arene and substrates. This study suggests that macrocycle-containing polymers could be a promising candidate for size-selective catalysis.

Conductive metal and covalent organic frameworks for electrocatalysis: design principles, recent progress and perspective

Metal and covalent organic frameworks (MOFs/COFs) are emerging promising candidates in the field of catalysts due to their porous nature, chemically well-defined active sites and structural diversity. However, they are typically provided with poor electrical conductivity, which is insufficient for them to work as satisfying electrocatalysts. Designing and fabricating MOFs/COFs with high conductivity presents a new avenue towards special electrochemical reactions. This minireview firstly highlighted the origin and design principles of conductive MOFs/COFs for electrocatalysis on the basis of typical charge transfer mechanisms, that is "through space", "extended conjugation" and "through bond". An overview of conductive MOFs/COFs used in the electrocatalytic carbon dioxide reduction reaction (CO₂RR), water splitting and the oxygen reduction reaction (ORR) was then made to track the very recent progress. In the final remarks, the present challenges and perspectives for the use of conductive MOFs/COFs as electrocatalysts including their structural optimization, feasible applications and structure-activity correlation are proposed.

Photoredox Heterobimetallic Dual Catalysis Using Engineered Covalent Organic Frameworks

The functionalization of an imine-based layered covalent organic framework (COF), containing phenanthroline units as ligands, has allowed the obtention of a heterobimetallated material. Photoactive Ir and Ni fragments were immobilized within the porous structure of the COF, enabling heterogeneous light-mediated Csp3-Csp2 cross-couplings. As radical precursors, potassium benzyl- and alkoxy-trifluoroborates, organic silicates, and proline derivatives were employed, which brings out the good versatility of Ir,Ni@Phen-COF. Moreover, in all the studied cases, an enhanced activity and stability have been observed in comparison with analogous homogenous systems.

3D Thioether-Based Covalent Organic Frameworks for Selective and Efficient Mercury Removal

Developing functionalized 3D covalent organic frameworks (3D COFs) is critical to broaden their potential applications. However, the introduction of specific functionality in 3D COFs remains a great challenge because most of the functional groups are not compatible with the synthesis conditions. Herein, for the first time 3D thioether-based COFs (JUC-570 and JUC-571) for mercury (Hg²⁺ ) removal from aqueous solution is reported. These 3D thioether-based COFs prepared by the bottom-up approach display high Hg²⁺ uptakes (972 mg g^-1 for JUC-570 and 970 mg g^-1 for JUC-571 at pH = 5), fast adsorption kinetics (distribution coefficient K_d value of 2.29 × 10⁷  mL g^-1 for JUC-570 and 2.07 × 10⁷  mL g^-1 for JUC-571), and favorable selectivity. In particular, JUC-570 is periodically decorated with isopropyl groups around imine bonds that markedly improve its chemical stability and effectively prevent the pore collapse, and thus endows high Hg²⁺ adsorption capacity (619 mg g^-1 ) and excellent cycle performance even at pH = 1. This study not only puts forward a new route to construct stable functionalized 3D COFs, but also promotes their potential applications in areas related to the environment.

An Imine-Linked Metal-Organic Framework as a Reactive Oxygen Species Generator

A new metal-organic framework (MOF) with both coordination linkages and covalent linkages is prepared by coordinating Cu^I with pyrazolate for an aldehyde-functionalized trinuclear complex, and subsequent imine condensation with p-phenylenediamine, a reaction typical for covalent organic framework (COF) synthesis. This MOF×COF collaboration yields FDM-71 with honeycomb layers stacked in eclipsed fashion. After dissociating the Cu^I -pyrazolate coordination in FDM-71, the obtained organic components carry the information of structural defects, and thus vacancy identity (aldehyde-based unit vacancy and amine-based unit vacancy) and concentration are definitely resolved. Further to the redox catalytic activity inherited from the complex, FDM-71 features effective photosensitizing activity. The two functions integrated in one well-defined structure is demonstrated by its high efficiency in decomposing H₂ O₂ and consequent excitation of O₂ to reactive oxygen species.

Conductive Phthalocyanine-Based Covalent Organic Framework for Highly Efficient Electroreduction of Carbon Dioxide

The electroreduction of CO₂ to value-added chemicals such as CO is a promising approach to realize carbon-neutral energy cycle, but still remains big challenge including low current density. Covalent organic frameworks (COFs) with abundant accessible active single-sites can offer a bridge between homogeneous and heterogeneous electrocatalysis, but the low electrical conductivity limits their application for CO₂ electroreduction reaction (CO₂ RR). Here, a 2D conductive Ni-phthalocyanine-based COF, named NiPc-COF, is synthesized by condensation of 2,3,9,10,16,17,23,24-octa-aminophthalocyaninato Ni(II) and tert-butylpyrene-tetraone for highly efficient CO₂ RR. Due to its highly intrinsic conductivity and accessible active sites, the robust conductive 2D NiPc-COF nanosheets exhibit very high CO selectivity (>93%) in a wide range of the applied potentials of -0.6 to -1.1 V versus the reversible hydrogen electrode (RHE) and large partial current density of 35 mA cm^-2 at -1.1 V versus RHE in aqueous solution that surpasses all the conventional COF electrocatalysts. The robust NiPc-COF that is bridged by covalent pyrazine linkage can maintain its CO₂ RR activity for 10 h. This work presents the implementation of the conductive COF nanosheets for CO₂ RR and provides a strategy to enhance energy conversion efficiency in electrocatalysis.

Nanoscale covalent organic frameworks as theranostic platforms for oncotherapy: synthesis, functionalization, and applications

Cancer nanomedicine is one of the most promising domains that has emerged in the continuing search for cancer diagnosis and treatment. The rapid development of nanomaterials and nanotechnology provide a vast array of materials for use in cancer nanomedicine. Among the various nanomaterials, covalent organic frameworks (COFs) are becoming an attractive class of upstarts owing to their high crystallinity, structural regularity, inherent porosity, extensive functionality, design flexibility, and good biocompatibility. In this comprehensive review, recent developments and key achievements of COFs are provided, including their structural design, synthesis methods, nanocrystallization, and functionalization strategies. Subsequently, a systematic overview of the potential oncotherapy applications achieved till date in the fast-growing field of COFs is provided with the aim to inspire further contributions and developments to this nascent but promising field. Finally, development opportunities, critical challenges, and some personal perspectives for COF-based cancer therapeutics are presented.