Carbon-Supported Single Metal Site Catalysts for Electrochemical CO2 Reduction to CO and Beyond

Industry-Level Electrocatalytic CO2 to CO Enabled by 2D Mesoporous Ni Single Atom Catalysts

Electrocatalytic CO2 reduction reaction (eCO2RR) has captivated widespread attentions, yet achieving the requisite efficiency, selectivity and stability for industrial applications poses a persistent challenge. Here, we report the synthesis of 2D mesoporous Ni single atom catalysts in N-doped carbon framework via a bottom-up interfacial assembly strategy. The 2D mesoporous Ni-N-C catalyst showcases an ultrathin thickness (~6.7 nm) with well-distributed 5 to 40 nm-width mesopores in plane and a high surface area. As a result, the Ni single atom sites with a high density (~6.0 wt %) are almost completely exposed and can be accessible, and the mass transfer can be greatly promoted even at high current densities. Thus, a high current density of 446 mA cm-2 with >95 % CO selectivity in a flow cell can be obtained. Concurrently, the catalyst demonstrates an impressive stability, maintaining a 50-hours continuous electrolysis in the membrane electrode assembly test and achieving an energy efficiency of 42 %. Finite element analysis reveals that the 2D mesoporous design enhances CO2 diffusion, ensuring efficient adsorption and swift CO desorption at high current densities. Our study paves a way for the fabrication of 2D mesoporous single atom catalysts with nearly 100 % accessibility and expedited mass transport.

Experimental and Theoretical Insights into Single Atoms, Dual Atoms, and Sub-Nanocluster Catalysts for Electrochemical CO2 Reduction (CO2RR) to High-Value Products

Electrocatalytic carbon dioxide (CO2) conversion into valuable chemicals paves the way for the realization of carbon recycling. Downsizing catalysts to single-atom catalysts (SACs), dual-atom catalysts (DACs), and sub-nanocluster catalysts (SNCCs) has generated highly active and selective CO2 transformation into highly reduced products. This is due to the introduction of numerous active sites, highly unsaturated coordination environments, efficient atom utilization, and confinement effect compared to their nanoparticle counterparts. Herein, recent Cu-based SACs are first reviewed and the newly emerged DACs and SNCCs expanding the catalysis of SACs to electrocatalytic CO2 reduction (CO2RR) to high-value products are discussed. Tandem Cu-based SAC-nanocatalysts (NCs) (SAC-NCs) are also discussed for the CO2RR to high-value products. Then, the non-Cu-based SACs, DACs, SAC-NCs, and SNCCs and theoretical calculations of various transition-metal catalysts for CO2RR to high-value products are summarized. Compared to previous achievements of less-reduced products, this review focuses on the double objective of achieving full CO2 reduction and increasing the selectivity and formation rate toward C-C coupled products with additional emphasis on the stability of the catalysts. Finally, through combined theoretical and experimental research, future outlooks are offered to further develop the CO2RR into high-value products over isolated atoms and sub-nanometal clusters.

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Designing and Engineering Atomically Dispersed Metal Catalysts for CO2 to CO Conversion: From Single to Dual Metal Sites

The electrochemical CO2 reduction reaction (CO2 RR) is a promising approach to achieving sustainable electrical-to-chemical energy conversion and storage while decarbonizing the emission-heavy industry. The carbon-supported, nitrogen-coordinated, and atomically dispersed metal sites are effective catalysts for CO generation due to their high activity, selectivity, and earth abundance. Here, we discuss progress, challenges, and opportunities for designing and engineering atomic metal catalysts from single to dual metal sites. Engineering single metal sites using a nitrogen-doped carbon model was highlighted to exclusively study the effect of carbon particle sizes, metal contents, and M-N bond structures in the form of MN4 moieties on catalytic activity and selectivity. The structure-property correlation was analyzed by combining experimental results with theoretical calculations to uncover the CO2 to CO conversion mechanisms. Furthermore, dual-metal site catalysts, inheriting the merits of single-metal sites, have emerged as a new frontier due to their potentially enhanced catalytic properties. Designing optimal dual metal site catalysts could offer additional sites to alter the surface adsorption to CO2 and various intermediates, thus breaking the scaling relationship limitation and activity-stability trade-off. The CO2 RR electrolysis in flow reactors was discussed to provide insights into the electrolyzer design with improved CO2 utilization, reaction kinetics, and mass transport.

Modulating the Structure and Composition of Single-Atom Electrocatalysts for CO2 reduction

Electrochemical CO2 reduction reaction (eCO2 RR) is a promising strategy to achieve carbon cycling by converting CO2 into value-added products under mild reaction conditions. Recently, single-atom catalysts (SACs) have shown enormous potential in eCO2 RR due to their high utilization of metal atoms and flexible coordination structures. In this work, the recent progress in SACs for eCO2 RR is outlined, with detailed discussions on the interaction between active sites and CO2 , especially the adsorption/activation behavior of CO2 and the effects of the electronic structure of SACs on eCO2 RR. Three perspectives form the starting point: 1) Important factors of SACs for eCO2 RR; 2) Typical SACs for eCO2 RR; 3) eCO2 RR toward valuable products. First, how different modification strategies can change the electronic structure of SACs to improve catalytic performance is discussed; Second, SACs with diverse supports and how supports assist active sites to undergo catalytic reaction are introduced; Finally, according to various valuable products from eCO2 RR, the reaction mechanism and measures which can be taken to improve the selectivity of eCO2 RR are discussed. Hopefully, this work can provide a comprehensive understanding of SACs for eCO2 RR and spark innovative design and modification ideas to develop highly efficient SACs for CO2 conversion to various valuable fuels/chemicals.

Atomic Zn-Doping Induced Sabatier Optimum in NiZn0.03 Catalyst for CO2 Electroreduction at Industrial-Level Current Densities

The Sabatier principle defines the essential criteria for an ideal catalyst in heterogeneous catalysis, while reaching the Sabatier optimum is still challenging in catalyst design. Herein, an elegant strategy is described to reach the Sabatier optimum of Ni electrocatalyst in CO2 reduction reaction (CO2 RR) by atomically Zn doping. The incorporation of 3% Zn single atom into Ni lattice leads to the moderate degrade of d-band center via Ni-Zn electronic coupling, which balances the bonding strengths of *COOH and *CO, resulting in a relative low energy barrier for CO2 activation while not being substantially poisoned by CO. Consequently, NiZn0.03 /C exhibits unique catalytic activity (jCO >100 mA cm-2 at -0.6 V), wide potential range for selective CO production (FECO >90% from -0.65 to -1.15 V), and outstanding long-term stability (FECO >90% during 85 h electrolysis at -0.85 V). The results provide valuable insights for the rational fabrication of superior non-noble bimetallic electrocatalysts in CO2 electroreduction.

Designing Surface and Interface Structures of Copper-Based Catalysts for Enhanced Electrochemical Reduction of CO2 to Alcohols

Electrochemical CO2 reduction (ECR) has emerged as a promising solution to address both the greenhouse effect caused by CO2 emissions and the energy shortage resulting from the depletion of nonrenewable fossil fuels. The production of multicarbon (C2+) products via ECR, especially high-energy-density alcohols, is highly desirable for industrial applications. Copper (Cu) is the only metal that produces alcohols with appreciable efficiency and kinetic viability in aqueous solutions. However, poor product selectivity is the main technical problem for applying the ECR technology in alcohol production. Extensive research has resulted in the rational design of electrocatalyst architectures using various strategies. This design significantly affects the adsorption energetics of intermediates and the reaction pathways for alcohol production. In this review, we focus on the design of effective catalysts for ECR to alcohols, discussing fundamental principles, innovative strategies, and mechanism understanding. Furthermore, the challenges and prospects in utilizing Cu-based materials for alcohol production via ECR are discussed.

N and OH-Immobilized Cu3 Clusters In Situ Reconstructed from Single-Metal Sites for Efficient CO2 Electromethanation in Bicontinuous Mesochannels

Cu-based catalysts hold promise for electrifying CO2 to produce methane, an extensively used fuel. However, the activity and selectivity remain insufficient due to the lack of catalyst design principles to steer complex CO2 reduction pathways. Herein, we develop a concept to design carbon-supported Cu catalysts by regulating Cu active sites' atomic-scale structures and engineering the carbon support's mesoscale architecture. This aims to provide a favorable local reaction microenvironment for a selective CO2 reduction pathway to methane. In situ X-ray absorption and Raman spectroscopy analyses reveal the dynamic reconstruction of nitrogen and hydroxyl-immobilized Cu3 (N,OH-Cu3) clusters derived from atomically dispersed Cu-N3 sites under realistic CO2 reduction conditions. The N,OH-Cu3 sites possess moderate *CO adsorption affinity and a low barrier for *CO hydrogenation, enabling intrinsically selective CO2-to-CH4 reduction compared to the C-C coupling with a high energy barrier. Importantly, a block copolymer-derived carbon fiber support with interconnected mesopores is constructed. The unique long-range mesochannels offer an H2O-deficient microenvironment and prolong the transport path for the CO intermediate, which could suppress the hydrogen evolution reaction and favor deep CO2 reduction toward methane formation. Thus, the newly developed catalyst consisting of in situ constructed N,OH-Cu3 active sites embedded into bicontinuous carbon mesochannels achieved an unprecedented Faradaic efficiency of 74.2% for the CO2 reduction to methane at an industry-level current density of 300 mA cm-2. This work explores effective concepts for steering desirable reaction pathways in complex interfacial catalytic systems via modulating active site structures at the atomic level and engineering pore architectures of supports on the mesoscale to create favorable microenvironments.

Atomically Dispersed ZnN4 Sites Anchored on P-Functionalized Carbon with Hierarchically Ordered Porous Structures for Boosted Electroreduction of CO2

Tuning the coordination structures of metal sites is intensively studied to improve the performances of single-atom site catalysts (SASC). However, the pore structure of SASC, which is highly related to the accessibility of active sites, has received little attention. In this work, single-atom ZnN4 sites embedded in P-functionalized carbon with hollow-wall and 3D ordered macroporous structure (denoted as H-3DOM-ZnN4 /P-C) are constructed. The creation of hollow walls in ordered macroporous structures can largely increase the external surface area to expose more active sites. The introduction of adjacent P atoms can optimize the electronic structure of ZnN4 sites through long-rang regulation to enhance the intrinsic activity and selectivity. In the electrochemical CO2 reduction reaction, H-3DOM-ZnN4 /P-C exhibits high CO Faradaic efficiency over 90% in a wide potential window (500 mV) and a large turnover frequency up to 7.8 × 104  h-1 at -1.0 V versus reversible hydrogen electrode, much higher than its counterparts without the hierarchically ordered structure or P-functionalization.

Breaking Scaling Relations for Highly Efficient Electroreduction of CO2 to CO on Atomically Dispersed Heteronuclear Dual-Atom Catalyst

Conversion of CO2 into value-added products by electrocatalysis provides a promising way to mitigate energy and environmental problems. However, it is greatly limited by the scaling relationship between the adsorption strength of intermediates. Herein, Mn and Ni single-atom catalysts, homonuclear dual-atom catalysts (DACs), and heteronuclear DACs are synthesized. Aberration-corrected annular dark-field scanning transmission electron microscopy (ADF-STEM) and X-ray absorption spectroscopy characterization uncovered the existence of the Mn─Ni pair in Mn─Ni DAC. X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy reveal that Mn donated electrons to Ni atoms in Mn─Ni DAC. Consequently, Mn─Ni DAC displays the highest CO Faradaic efficiency of 98.7% at -0.7 V versus reversible hydrogen electrode (vs RHE) with CO partial current density of 16.8 mA cm-2 . Density functional theory calculations disclose that the scaling relationship between the binding strength of intermediates is broken, resulting in superior performance for ECR to CO over Mn─Ni─NC catalyst.

Insight on Atomically Dispersed Cu Catalysts for Electrochemical CO2 Reduction

Electrochemical CO2 reduction (ECO2R) with renewable electricity is an advanced carbon conversion technology. At present, copper is the only metal to selectively convert CO2 into multicarbon (C2+) products. Among them, atomically dispersed (AD) Cu catalysts have received great attention due to the relatively single chemical environment, which are able to minimize the negative impact of morphology, valence state, and crystallographic properties, etc. on product selectivity. Furthermore, the completely exposed atomic Cu sites not only provide space and bonding electrons for the adsorption of reactants in favor of better catalytic activity but also provide an ideal platform for studying its reaction mechanism. This review summarizes the recent progress of AD Cu catalysts as a chemically tunable platform for ECO2R, including the atomic Cu sites dynamic evolution, the catalytic performance, and mechanism. Furthermore, the prospects and challenges of AD Cu catalysts for ECO2R are carefully discussed. We sincerely hope that this review can contribute to the rational design of AD Cu catalysts with enhanced performance for ECO2R.

Customization from Single to Dual Atomic Sites for Efficient Electrocatalytic CO2 Reduction to Value-added Chemicals

In recent years, single-atom catalysts (SACs) have received increasing attention in the field of electrochemical CO2 RR with their efficient atom utilization efficiency and excellent catalytic performance. However, their low metal loading and the presence of linear relationships for single active sites with simple structures possibly restrict their activity and practical applications. Active site tailoring at the atomic level is a visionary approach to break the existing limitations of SACs. This paper first briefly introduces the synthesis strategies of SACs and DACs. Then, combining previous experimental and theoretical studies, this paper introduces four optimization strategies, namely spin-state tuning engineering, axial functionalization engineering, ligand engineering, and substrate tuning engineering, for improving the catalytic performance of SACs in the electrochemical CO2 RR process by combining previous experimental and theoretical studies. Then it is introduced that DACs exhibit significant advantages over SACs in increasing metal atom loading, promoting the adsorption and activation of CO2 molecules, modulating intermediate adsorption, and promoting C-C coupling. At the end of this paper, we briefly and succinctly summarize the main challenges and application prospects of SACs and DACs in the field of electrochemical CO2 RR at present.

Electrocatalytic Reactions for Converting CO2 to Value-Added Products: Recent Progress and Emerging Trends

Carbon dioxide (CO₂) emissions are an important environmental issue that causes greenhouse and climate change effects on the earth. Nowadays, CO₂ has various conversion methods to be a potential carbon resource, such as photocatalytic, electrocatalytic, and photo-electrocatalytic. CO₂ conversion into value-added products has many advantages, including facile control of the reaction rate by adjusting the applied voltage and minimal environmental pollution. The development of efficient electrocatalysts and improving their viability with appropriate reactor designs is essential for the commercialization of this environmentally friendly method. In addition, microbial electrosynthesis which utilizes an electroactive bio-film electrode as a catalyst can be considered as another option to reduce CO₂. This review highlights the methods which can contribute to the increase in efficiency of carbon dioxide reduction (CO₂R) processes through electrode structure with the introduction of various electrolytes such as ionic liquid, sulfate, and bicarbonate electrolytes, with the control of pH and with the control of the operating pressure and temperature of the electrolyzer. It also presents the research status, a fundamental understanding of carbon dioxide reduction reaction (CO₂RR) mechanisms, the development of electrochemical CO₂R technologies, and challenges and opportunities for future research.

Microstructure Design Strategy for Molecularly Dispersed Cobalt Phthalocyanine and Efficient Mass Transport in CO2 Electroreduction

Cobalt phthalocyanine (CoPc) has attracted particular interest owing to its excellent activity during the electrochemical CO₂ conversion to CO. However, the efficient utilization of CoPc at industrially relevant current densities is still a challenge owing to its nonconductive property, agglomeration, and unfavorable conductive substrate design. Here, a microstructure design strategy for dispersing CoPc molecules on a carbon substrate for efficient CO₂ transport during CO₂ electrolysis is proposed and demonstrated. The highly dispersed CoPc is loaded on a macroporous hollow nanocarbon sheet to act as the catalyst (CoPc/CS). The unique interconnected and macroporous structure of the carbon sheet forms a large specific surface area to anchor CoPc with high dispersion and simultaneously boosts the mass transport of reactants in the catalyst layer, significantly improving the electrochemical performance. By employing a zero-gap flow cell, the designed catalyst can mediate CO₂ to CO with a high full-cell energy efficiency of 57% at 200 mA cm^-2 .

Near- and Long-Range Electronic Modulation of Single Metal Sites to Boost CO2 Electrocatalytic Reduction

Tuning the electronic structure of the active center is effective to improve the intrinsic activity of single-atom catalysts but the realization of precise regulation remains challenging. Herein, a strategy of "synergistically near- and long-range regulation" is reported to effectively modulate the electronic structure of single-atom sites. ZnN₄ sites decorated with axial sulfur ligand in the first coordination and surrounded phosphorus atoms in the carbon matrix are successfully constructed in the hollow carbon supports (ZnN₄ S₁ /P-HC). ZnN₄ S₁ /P-HC exhibits excellent performance for CO₂ reduction reaction (CO₂ RR) with a Faraday efficiency of CO close to 100%. The coupling of the CO₂ RR with thermodynamically favorable hydrazine oxidation reaction to replace oxygen evolution reaction in a two-electrode electrolyzer can greatly lower the cell voltage by 0.92 V at a current density of 5 mA cm^-2 , theoretically saving 46% of energy consumption. Theoretical calculation reveals that the near-range regulation with axial thiophene-S ligand and long-range regulation with neighboring P atoms can synergistically lead to the increase of electron localization around the Zn sites, which strengthens the adsorption of *COOH intermediate and therefore boosts the CO₂ RR.

The built-in electric field across FeN/Fe3N interface for efficient electrochemical reduction of CO2 to CO

Nanostructured metal-nitrides have attracted tremendous interest as a new generation of catalysts for electroreduction of CO₂, but these structures have limited activity and stability in the reduction condition. Herein, we report a method of fabricating FeN/Fe₃N nanoparticles with FeN/Fe₃N interface exposed on the NP surface for efficient electrochemical CO₂ reduction reaction (CO₂RR). The FeN/Fe₃N interface is populated with Fe-N₄ and Fe-N₂ coordination sites respectively that show the desired catalysis synergy to enhance the reduction of CO₂ to CO. The CO Faraday efficiency reaches 98% at -0.4 V vs. reversible hydrogen electrode, and the FE stays stable from -0.4 to -0.9 V during the 100 h electrolysis time period. This FeN/Fe₃N synergy arises from electron transfer from Fe₃N to FeN and the preferred CO₂ adsorption and reduction to *COOH on FeN. Our study demonstrates a reliable interface control strategy to improve catalytic efficiency of the Fe-N structure for CO₂RR.

Modulating the Asymmetric Atomic Interface of Copper Single Atoms for Efficient CO2 Electroreduction

Cu single-atom catalysts (Cu SACs) have been considered as promising catalysts for efficient electrocatalytic CO₂ reduction reactions (ECRRs). However, the reports on Cu SACs with an asymmetric atomic interface to obtain CO are few. Herein, we rationally designed two Cu SACs with different asymmetric atomic interfaces to explore their catalytic performance. The catalyst of CuN₃O/C delivers high ECRR selectivity with an FE_CO value of above 90% in a wide potential window from -0.5 to -0.9 V vs RHE (in particular, 96% at -0.8 V), while CuCO₃/C delivers poor selectivity for CO production with a maximum FE_CO value of only 20.0% at -0.5 V vs RHE. Besides, CuN₃O/C exhibited a large turnover frequency (TOF) up to 2782.6 h^-1 at -0.9 V vs RHE, which is much better than the maximum 4.8 h^-1 of CuCO₃/C. Density functional theory (DFT) results demonstrate that the CuN₃O site needs a lower Gibbs free energy than CuCO₃ in the rate-determining step of CO desorption, leading to the outstanding performance of CuN₃O/C on the process of ECRR-to-CO. This work provides an efficient strategy to improve the selectivity and activity of the ECRR via regulating asymmetric atomic interfaces of SACs by adjusting the coordination atoms.

A rational design of functional porous frameworks for electrocatalytic CO2 reduction reaction

The electrocatalytic CO₂ reduction reaction (ECO₂RR) is considered one of the approaches with the most potential to achieve lower carbon emissions in the future, but a huge gap still exists between the current ECO₂RR technology and industrial applications. Therefore, the design and preparation of catalysts with satisfactory activity, selectivity and stability for the ECO₂RR have attracted extensive attention. As a classic type of functional porous framework, crystalline porous materials (e.g., metal organic frameworks (MOFs) and covalent organic frameworks (COFs)) and derived porous materials (e.g., MOF/COF composites and pyrolysates) have been regarded as superior catalysts for the ECO₂RR due to their advantages such as designable porosity, modifiable skeleton, flexible active site structure, regulable charge transfer pathway and controllable morphology. Meanwhile, with the rapid development of nano-characterization and theoretical calculation technologies, the structure-activity relationships of functional porous frameworks have been comprehensively considered, i.e., metallic element type, local coordination environment, and microstructure, corresponding to selectivity, activity and mass transfer efficiency for the ECO₂RR, respectively. In this review, the rational design strategy for functional porous frameworks is briefly but precisely generalized based on three key factors including metallic element type, local coordination environment, and microstructure. Then, details about the structure-activity relationships for functional porous frameworks are illustrated in the order of MOFs, COFs, composites and pyrolysates to analyze the effect of the above-mentioned three factors on their ECO₂RR performance. Finally, the challenges and perspectives of functional porous frameworks for the further development of the ECO₂RR are reasonably proposed, aiming to offer insights for future studies in this intriguing and significant research field.

Theoretical Screening of CO2 Electroreduction over MOF-808-Supported Self-Adaptive Dual-Metal-Site Pairs

Electrochemical CO₂ reduction to transportation fuels and valuable platform chemicals provides a sustainable avenue for renewable energy storage and realizes an artificially closed carbon loop. However, the rational design of highly active and selective CO₂ reduction electrocatalysts remains a challenging task. Herein, a series of metal-organic framework (MOF)-supported flexible, self-adaptive dual-metal-site pairs (DMSPs) including 21 pairwise combinations of six transition metal single sites (MOF-808-EDTA-M₁M₂, M₁/M₂ = Fe, Cu, Ni, Pd, Pt, Au) for the CO₂ reduction reaction (CO₂RR) were theoretically screened using density functional theory calculations. Against the competitive hydrogen evolution reaction, MOF-808-EDTA-FeFe and MOF-808-EDTA-FePt were identified as the promising CO₂RR electrocatalysts toward C₁ and C₂ products. The calculated limiting potential for CO₂ electroreduction to C₂H₆ and C₂H₅OH over MOF-808-EDTA-FeFe is -0.87 V. Compared with an applied potential of -0.56 eV toward CH₄ production over MOF-808-EDTA-FeFe, MOF-808-EDTA-FePt exhibits an even better activity for CO₂ reduction to C₁ products at a limiting potential of -0.35 V. The present work not only identifies promising candidates for highly selective CO₂RR electrocatalysts leading to C₁ and C₂ products but also provides mechanistic insights into the dynamic nature of DMSPs for stabilizing various reaction intermediates in the CO₂RR process.

Theoretical study of the catalytic performance of Fe and Cu single-atom catalysts supported on Mo2C toward the reverse water-gas shift reaction

The reverse water-gas shift (RWGS) is an attractive process using CO₂ as a chemical feedstock. Single-atom catalysts (SACs) exhibit high catalytic activity in several reactions, maximizing the metal use and enabling easier tuning by rational design than heterogeneous catalysts based on metal nanoparticles. In this study, we evaluate, using DFT calculations, the RWGS mechanism catalyzed by SACs based on Cu and Fe supported on Mo₂C, which is also an active RWGS catalyst on its own. While Cu/Mo₂C showed more feasible energy barriers toward CO formation, Fe/Mo₂C presented lower energy barriers for H₂O formation. Overall, the study showcases the difference in reactivity between both metals, evaluating the impact of oxygen coverage and suggesting Fe/Mo₂C as a potentially active RWGS catalyst based on theoretical calculations.

MOF-Derived Ni Single-Atom Catalyst with Abundant Mesopores for Efficient Mass Transport in Electrolytic Bicarbonate Conversion

Direct electrolytic CO₂ capture solution (e.g., bicarbonate), which bypasses the energy-intensive processes of CO₂ desorption, offers a unique route for CO₂ conversion to fuels or value-added chemicals. Nonprecious Ni single-atom catalysts (SACs) anchored on metal-organic frameworks (MOFs) possess abundant porous structures and exhibit a high selectivity for CO production. However, these MOF-derived Ni SACs are usually synthesized by a series of complex procedures, and their abundant micropores (<2 nm) also reduce the local reactant transport in the catalysts. Herein, we report a simple one-step pyrolysis method to prepare a MOF-derived Ni SAC that can efficiently boost bicarbonate conversion to CO. The abundant mesopores around 35.4 nm significantly enhance the transport of local reactants in the catalysts. At a high current density of 100 mA/cm², the tailored catalyst shows 67.2% Faradaic efficiency of CO, which, to the best of our knowledge, exceeds the state-of-the-art precious Ag nanoparticle catalysts reported so far. This study highlights the significance of developing nonprecious catalysts for employment in large-scale bicarbonate electrolysis conversion devices.

A Honeycomb-Like Porous Crystalline Hetero-Electrocatalyst for Efficient Electrocatalytic CO2 Reduction

Porous heterostructured electrocatalysts with multifunctionality and synergistic effect have much benefit for efficient electrocatalytic CO₂ reduction reaction (CO₂ RR), yet it still remains a daunting challenge to explore heterostructures based on covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) in this field. Here, a series of honeycomb-like porous crystalline hetero-electrocatalysts (MCH-X, X = 1-4, X stands for the numbered sample obtained from different MOF doses in the synthesis of the MCH) are synthesized, and these are successfully applied in electrocatalytic CO₂ RR. The specially designed heterostructures with integrated porous MOF-template and ultrathin COF-coating enable efficient CO₂ adsorption/activation and conversion into CH₄ . The best of them, MCH-3, shows greatly inhibited H₂ evolution, excellent current density (-398.1 mA cm^-2 ), and superior FE CH 4 ${\rm{F}}{{\rm{E}}_{{\rm{C}}{{\rm{H}}_4}}}$ (76.7%) to the physical mixture (38.0%), the MOF@COF without the honeycomb-like morphology (47.7%), and the bare COF (37.5%) and MOF (15.9%) at -1.0 V. Based on the density functional theory calculations and various characterizations, the vital roles of the MOF in facilitating CO₂ adsorption/activation, stabilizing intermediates, and conquering the energy barrier of rate-determining step are intensively studied.

Heteroatom-Doped Porous Carbon-Based Nanostructures for Electrochemical CO2 Reduction

The continual rise of the CO2 concentration in the Earth's atmosphere is the foremost reason for environmental concerns such as global warming, ocean acidification, rising sea levels, and the extinction of various species. The electrochemical CO2 reduction (CO2RR) is a promising green and efficient approach for converting CO2 to high-value-added products such as alcohols, acids, and chemicals. Developing efficient and low-cost electrocatalysts is the main barrier to scaling up CO2RR for large-scale applications. Heteroatom-doped porous carbon-based (HA-PCs) catalysts are deemed as green, efficient, low-cost, and durable electrocatalysts for the CO2RR due to their great physiochemical and catalytic merits (i.e., great surface area, electrical conductivity, rich electrical density, active sites, inferior H2 evolution activity, tailorable structures, and chemical-physical-thermal stability). They are also easily synthesized in a high yield from inexpensive and earth-abundant resources that meet sustainability and large-scale requirements. This review emphasizes the rational synthesis of HA-PCs for the CO2RR rooting from the engineering methods of HA-PCs to the effect of mono, binary, and ternary dopants (i.e., N, S, F, or B) on the CO2RR activity and durability. The effect of CO2 on the environment and human health, in addition to the recent advances in CO2RR fundamental pathways and mechanisms, are also discussed. Finally, the evolving challenges and future perspectives on the development of heteroatom-doped porous carbon-based nanocatalysts for the CO2RR are underlined.

Atomically Dispersed Dual-Metal Site Catalysts for Enhanced CO2 Reduction: Mechanistic Insight into Active Site Structures

Carbon-supported nitrogen-coordinated single-metal site catalysts (i.e., M-N-C, M: Fe, Co, or Ni) are active for the electrochemical CO₂ reduction reaction (CO₂ RR) to CO. Further improving their intrinsic activity and selectivity by tuning their N-M bond structures and coordination is limited. Herein, we expand the coordination environments of M-N-C catalysts by designing dual-metal active sites. The Ni-Fe catalyst exhibited the most efficient CO2RR activity and promising stability compared to other combinations. Advanced structural characterization and theoretical prediction suggest that the most active N-coordinated dual-metal site configurations are 2N-bridged (Fe-Ni)N₆ , in which FeN₄ and NiN₄ moieties are shared with two N atoms. Two metals (i.e., Fe and Ni) in the dual-metal site likely generate a synergy to enable more optimal *COOH adsorption and *CO desorption than single-metal sites (FeN₄ or NiN₄ ) with improved intrinsic catalytic activity and selectivity.

DFT Study on the CO2 Reduction to C2 Chemicals Catalyzed by Fe and Co Clusters Supported on N-Doped Carbon

The catalytic conversion of CO₂ to C₂ products through the CO₂ reduction reaction (CO₂RR) offers the possibility of preparing carbon-based fuels and valuable chemicals in a sustainable way. Herein, various Fe_n and Co₅ clusters are designed to screen out the good catalysts with reasonable stability, as well as high activity and selectivity for either C₂H₄ or CH₃CH₂OH generation through density functional theory (DFT) calculations. The binding energy and cohesive energy calculations show that both Fe₅ and Co₅ clusters can adsorb stably on the N-doped carbon (NC) with one metal atom anchored at the center of the defected hole via a classical MN₄ structure. The proposed reaction pathway demonstrates that the Fe₅-NC cluster has better activity than Co₅-NC, since the carbon–carbon coupling reaction is the potential determining step (PDS), and the free energy change is 0.22 eV lower in the Fe₅-NC cluster than that in Co₅-NC. However, Co₅-NC shows a better selectivity towards C₂H₄ since the hydrogenation of CH₂CHO to CH₃CHO becomes the PDS, and the free energy change is 1.08 eV, which is 0.07 eV higher than that in the C-C coupling step. The larger discrepancy of d band center and density of states (DOS) between the topmost Fe and sub-layer Fe may account for the lower free energy change in the C-C coupling reaction. Our theoretical insights propose an explicit indication for designing new catalysts based on the transition metal (TM) clusters supported on N-doped carbon for multi-hydrocarbon synthesis through systematically analyzing the stability of the metal clusters, the electronic structure of the critical intermediates and the energy profiles during the CO₂RR.

Tuning Two-Electron Oxygen-Reduction Pathways for H2 O2 Electrosynthesis via Engineering Atomically Dispersed Single Metal Site Catalysts

The hydrogen peroxide (H₂ O₂ ) generation via the electrochemical oxygen reduction reaction (ORR) under ambient conditions is emerging as an alternative and green strategy to the traditional energy-intensive anthraquinone process and unsafe direct synthesis using H₂ and O₂ . It enables on-site and decentralized H₂ O₂ production using air and renewable electricity for various applications. Currently, atomically dispersed single metal site catalysts have emerged as the most promising platinum group metal (PGM)-free electrocatalysts for the ORR. Further tuning their central metal sites, coordination environments, and local structures can be highly active and selective for H₂ O₂ production via the 2e^- ORR. Herein, recent methodologies and achievements on developing single metal site catalysts for selective O₂ to H₂ O₂ reduction are summarized. Combined with theoretical computation and advanced characterization, a structure-property correlation to guide rational catalyst design with a favorable 2e^- ORR process is aimed to provide. Due to the oxidative nature of H₂ O₂ and the derived free radicals, catalyst stability and effective solutions to improve catalyst tolerance to H₂ O₂ are emphasized. Transferring intrinsic catalyst properties to electrode performance for viable applications always remains a grand challenge. The key performance metrics and knowledge during the electrolyzer development are, therefore, highlighted.

Recent Progress in Two-Dimensional Materials for Electrocatalytic CO2 Reduction

Electrocatalytic CO2 reduction (ECR) is an attractive approach to convert atmospheric CO2 to value-added chemicals and fuels. However, this process is still hindered by sluggish CO2 reaction kinetics and the lack of efficient electrocatalysts. Therefore, new strategies for electrocatalyst design should be developed to solve these problems. Two-dimensional (2D) materials possess great potential in ECR because of their unique electronic and structural properties, excellent electrical conductivity, high atomic utilization and high specific surface area. In this review, we summarize the recent progress on 2D electrocatalysts applied in ECR. We first give a brief description of ECR fundamentals and then discuss in detail the development of different types of 2D electrocatalysts for ECR, including metal, graphene-based materials, transition metal dichalcogenides (TMDs), metal–organic frameworks (MOFs), metal oxide nanosheets and 2D materials incorporated with single atoms as single-atom catalysts (SACs). Metals, such as Ag, Cu, Au, Pt and Pd, graphene-based materials, metal-doped nitric carbide, TMDs and MOFs can mostly only produce CO with a Faradic efficiencies (FE) of 80~90%. Particularly, SACs can exhibit FEs of CO higher than 90%. Metal oxides and graphene-based materials can produce HCOOH, but the FEs are generally lower than that of CO. Only Cu-based materials can produce high carbon products such as C2H4 but they have low product selectivity. It was proposed that the design and synthesis of novel 2D materials for ECR should be based on thorough understanding of the reaction mechanism through combined theoretical prediction with experimental study, especially in situ characterization techniques. The gap between laboratory synthesis and large-scale production of 2D materials also needs to be closed for commercial applications.

Effective Screening Route for Highly Active and Selective Metal-Nitrogen-Doped Carbon Catalysts in CO2 Electrochemical Reduction

To identify high-efficiency metal-nitrogen-doped (M-N-C) electrocatalysts for the electrochemical CO₂ -to-CO reduction reaction (CO₂ RR), a method that uses density functional theory calculation is presented to evaluate their selectivity, activity, and structural stability. Twenty-three M-N₄ -C catalysts are evaluated, and three of them (M = Fe, Co, or Ni) are identified as promising candidates. They are synthesized and tested as proof-of-concept catalysts for CO₂ -to-CO conversion. Different key descriptors, including the maximum reaction energy, differences of the *H and *CO binding energy (ΔG_*H -ΔG_*CO ), and *CO desorption energy (ΔG_{*CO→CO( g )} ), are used to clarify the reaction mechanism. These computational descriptors effectively predict the experimental observations in the entire range of electrochemical potential. The findings provide a guideline for rational design of heterogeneous CO₂ RR electrocatalysts.

Advances and Challenges for the Electrochemical Reduction of CO2 to CO: From Fundamentals to Industrialization

The electrochemical carbon dioxide reduction reaction (CO₂ RR) provides an attractive approach to convert renewable electricity into fuels and feedstocks in the form of chemical bonds. Among the different CO₂ RR pathways, the conversion of CO₂ into CO is considered one of the most promising candidate reactions because of its high technological and economic feasibility. Integrating catalyst and electrolyte design with an understanding of the catalytic mechanism will yield scientific insights and promote this technology towards industrial implementation. Herein, we give an overview of recent advances and challenges for the selective conversion of CO₂ into CO. Multidimensional catalyst and electrolyte engineering for the CO₂ RR are also summarized. Furthermore, recent studies on the large-scale production of CO are highlighted to facilitate industrialization of the electrochemical reduction of CO₂ . To conclude, the remaining technological challenges and future directions for the industrial application of the CO₂ RR to generate CO are highlighted.

Integrating Single Atoms with Different Microenvironments into One Porous Organic Polymer for Efficient Photocatalytic CO2 Reduction

The precise identification of single-atom catalysts (SACs) activity and boosting their efficiency toward CO₂ conversion is imperative yet quite challenging. Herein, for the first time a series of porous organic polymers is designed and prepared simultaneously, containing well-defined M-N₄ and M-N₂ O₂ single-atom sites. Such a strategy not only offers multiactive sites to promote the catalytic efficiency but also provides a more direct chance to identify the metal center activity. The CO₂ photoreduction results indicate that the introduction of salphen unit with Ni-N₂ O₂ catalytic centers into pristine phthalocyanine-based Ni-N₄ framework achieves remarkable CO generation ability (7.77 mmol g^-1 ) with a high selectivity of 96% over H₂ . In combination with control experiments, as well as theoretical studies, the Ni-N₂ O₂ moiety is evidenced as a more active site for CO₂ RR compared with the traditional Ni-N₄ moiety, which can be ascribed to the M-N₂ O₂ active sites effectively reducing the energy barrier, facilitating the adsorption of reaction radicals *COOH, and improving the charge transportation. This work might shed some light on designing more efficient SACs toward CO₂ reduction through modification of their coordination environments.

Global opportunities and challenges on net-zero CO2 emissions towards a sustainable future

Artistic representation of CO2 emissions from various sources into the atmosphere, and its consequence on the global climatic conditions.

Metal–organic framework derived carbon supported Cu–In nanoparticles for highly selective CO2 electroreduction to CO

The designed Cu–In bimetal exhibits much higher CO2-to-CO selectivity than monometallic Cu and In.