Fe Single-Atom Catalyst for Efficient and Rapid Fenton-Like Degradation of Organics and Disinfection against Bacteria

Single-atom nanozymes for antibacterial applications

Bacteria have always been a thorny problem that threatens human health and food safety. Conventional antibiotic treatment often leads to the emergence of drug resistance. Therefore, the development of more effective antibacterial agents is urgently needed. Single-atom nanozymes (SAzymes) can efficiently eliminate bacteria due to their high atomic utilization, abundant active centers, and good natural enzyme mimicry, providing a potential alternative choice for antibiotics in antibacterial applications. Here, the antibacterial applications of SAzymes are reviewed and their catalytic properties are discussed from the aspects of active sites, coordination environment regulation and carrier selection. Then, the antibacterial effect of SAzymes is elaborated in combination with photothermal therapy (PTT) and sonodynamic therapy (SDT). Finally, the problems faced by SAzymes in antibacterial applications and their future development potential are proposed.

Non-radical oxidation driven by iron-based materials without energy assistance in wastewater treatment

Chemical oxidation is extensively utilized to mitigate the impact of organic pollutants in wastewater. The non-radical oxidation driven by iron-based materials is noted for its environmental friendliness and resistance to wastewater matrix, and it is a promising approach for practical wastewater treatment. However, the complexity of heterogeneous systems and the diversity of evolutionary pathways make the mechanisms of non-radical oxidation driven by iron-based materials elusive. This work provides a systematic review of various non-radical oxidation systems driven by iron-based materials, including singlet oxygen (1O2), reactive iron species (RFeS), and interfacial electron transfer. The unique mechanisms by which iron-based materials activate different oxidants (ozone, hydrogen peroxide, persulfate, periodate, and peracetic acid) to produce non-radical oxidation are described. The roles of active sites and the unique structures of iron-based materials in facilitating non-radical oxidation are discussed. Commonly employed identification methods in wastewater treatment are compared, such as quenching, chemical probes, spectroscopy, mass spectrometry, and electrochemical testing. According to the process of iron-based materials driving non-radical oxidation to remove organic pollutants, the driving factors at different stages are summarized. Finally, challenges and countermeasures are proposed in terms of mechanism exploration, detection methods and practical applications of non-radical oxidation driven by iron-based materials. This work provides valuable insights for understanding and developing non-radical oxidation systems.

Highly efficient activation of peroxymonosulfate via KOH-activated Fe@NC for the degradation of bisphenol A

In this study, the KOH-modified Fe-ZIF-derived carbon materials (Fe@NC-KOH-x) were designed for Fenton-like systems to enhance bisphenol A (BPA) removal from wastewater. Compared with the Fe@NC without KOH activation, the pore structure, BET (Brunner-Emmet-Teller) surface area, and oxygen-containing functional group of KOH-activated Fe@NC-KOH-x are dramatically improved, which increases the adsorption and catalytic performance. The Fe@NC-KOH-900/PMS system showed significant BPA removal reactivity across wide pH ranges and low doses of Fe@NC-KOH-900. Interestingly, our findings indicated that the removal effectiveness of BPA improved when PMS was introduced following the saturation adsorption of Fe@NC-KOH-x, as compared to the simultaneous introduction of Fe@NC-KOH-x and PMS. More particularly, through regression analysis, we found that the proportion of reactive species in the Fe@NC-KOH-x/PMS system changes with the increase of pyrolysis temperature, and there was a certain relationship between structure-function and active species in the Fe@NC-KOH-x/PMS system. O-C = O, Fe-N4, C-O, and pyrrolic N in Fe@NC-KOH-x lead to the generation of •OH, and SO4-•, C = O, Fe-N4, and defect are closely related to FeIV = O, and the formation of 1O2 is affected by Fe-N4, graphite N, C = O, and defect. Also, the density functional theory (DFT) calculation and the potential correlation between catalyst active centers and reactive oxygen species indicate that Fe-N4 is the main active site of Fe@NC-KOH-x. These outcomes of the study offer an innovation for enhanced elimination of BPA in wastewater treatment and provide a dynamic understanding of the mechanism of BPA degradation.

Key role of Phyllanthus emblica L. fruit extract promotes ZVI/H2O2 process: rich titratable acid, suitable chelating ability, and antioxidant capacity

Phyllanthus emblica L. fruit extract (PFE) was introduced to improve ZVI/H2O2 technology, and the efficiency and mechanism of PFE promoting ZVI/H2O2 technology were explored. With the introduction of PFE, the Norfloxacin (NOR) removal rate and kobs of the process were improved by 41.17% and 5.08 times, respectively. In the ZVI/H2O2/PFE process, the degradation of NOR by the attack of ROS is the main pathway for decontamination and is dominated by the heterogeneous reaction on the catalyst surface. PFE contains 13.92 g/L titratable acid and has good complexing ability and antioxidant ability. The mechanism of PFE promoting ZVI/H2O2 technology was based on lowering the pH, complemented by chelation and antioxidant capacity. With the introduction of PFE, the utilization rate of the reagent was significantly increased (7.56 times for ZVI and 3.21 times for H2O2), the applicable pH range was widened (6-9) and the iron sludge was reduced (32.80%). Meanwhile, the concept of UPR is proposed for the first time. The result is the key role to the selection of green promoters in the ZVI/H2O2 process depends on the abundance of titratable acid, followed by a certain chelating ability and antioxidant capacity.

Correlating active sites and oxidative species in single-atom catalyzed Fenton-like reactions

Single-atom catalysts (SACs) have gained widespread popularity in heterogeneous catalysis-based advanced oxidation processes (AOPs), owing to their optimal metal atom utilization efficiency and excellent recyclability by triggering reactive oxidative species (ROS) for target pollutant oxidation in water. Systematic summaries regarding the correlation between the active sites, catalytic activity, and reactive species of SACs have rarely been reported. This review provides an overview of the catalytic performance of carbon- and metal oxide-supported SACs in Fenton-like reactions, as well as the different oxidation pathways induced by the metal and non-metal active sites, including radical-based pathways (e.g., ·OH and SO4˙-) and nonradical-based pathways (e.g. 1O2, high-valent metal-oxo species, and direct electron transfer). Thereafter, we discuss the effects of metal types, coordination environments, and spin states on the overall catalytic performance and the generated ROS in Fenton-like reactions. Additionally, we provide a perspective on the future challenges and prospects for SACs in water purification.

Single Atom Catalyst in Persulfate Oxidation Reaction: From Atom Species to Substance

With maximum utilization of active metal sites, more and more researchers have reported using single atom catalysts (SACs) to activate persulfate (PS) for organic pollutants removal. In SACs, single metal atoms (Fe, Co, Cu, Mn, etc.) and different substrates (porous carbon, biochar, graphene oxide, carbon nitride, MOF, MoS2, and others) are the basic structural. Metal single atoms, substances, and connected chemical bonds all have a great influence on the electronic structures that directly affect the activation process of PS and degradation efficiency to organic pollutants. However, there are few relevant reviews about the interaction between metal single atoms and substances during PS activation process. In this review, the SACs with different metal species and substrates are summarized to investigate the metal-support interaction and evaluate their effects on PS oxidation reaction process. Furthermore, how metal atoms and substrates affect the reactive species and degradation pathways are also discussed. Finally, the challenges and prospects of SACs in PS-AOPs are proposed.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.

Design of Environmental-Friendly Carbon-Based Catalysts for Efficient Advanced Oxidation Processes

Advanced oxidation processes (AOPs) represent one of the most promising strategies to generate highly reactive species to deal with organic dye-contaminated water. However, developing green and cost-effective catalysts is still a long-term goal for the wide practical application of AOPs. Herein, we demonstrated doping cobalt in porous carbon to efficiently catalyze the oxidation of the typically persistent organic pollutant rhodamine B, via multiple reactive species through the activation of peroxymonosulfate (PMS). The catalysts were prepared by facile pyrolysis of nanocomposites with a core of cobalt-loaded silica and a shell of phenolic resin (Co-C/SiO2). It showed that the produced 1O2 could effectively attack the electron-rich functional groups in rhodamine B, promoting its molecular chain breakage and accelerating its oxidative degradation reaction with reactive oxygen-containing radicals. The optimized Co-C/SiO2 catalyst exhibits impressive catalytic performance, with a degradation rate of rhodamine B up to 96.7% in 14 min and a reaction rate constant (k) as high as 0.2271 min-1, which suggested promising potential for its practical application.

Electrochemically-driven actuators: from materials to mechanisms and from performance to applications

Soft actuators, pivotal for converting external energy into mechanical motion, have become increasingly vital in a wide range of applications, from the subtle engineering of soft robotics to the demanding environments of aerospace exploration. Among these, electrochemically-driven actuators (EC actuators), are particularly distinguished by their operation through ion diffusion or intercalation-induced volume changes. These actuators feature notable advantages, including precise deformation control under electrical stimuli, freedom from Carnot efficiency limitations, and the ability to maintain their actuated state with minimal energy use, akin to the latching state in skeletal muscles. This review extensively examines EC actuators, emphasizing their classification based on diverse material types, driving mechanisms, actuator configurations, and potential applications. It aims to illuminate the complicated driving mechanisms of different categories, uncover their underlying connections, and reveal the interdependencies among materials, mechanisms, and performances. We conduct an in-depth analysis of both conventional and emerging EC actuator materials, casting a forward-looking lens on their trajectories and pinpointing areas ready for innovation and performance enhancement strategies. We also navigate through the challenges and opportunities within the field, including optimizing current materials, exploring new materials, and scaling up production processes. Overall, this review aims to provide a scientifically robust narrative that captures the current state of EC actuators and sets a trajectory for future innovation in this rapidly advancing field.

Fully dispersed cobalt diatomic site with significantly improved Fenton-like catalysis performance for organic pollutant degradation

A novel strategy for better catalytic performance in terms of precisely tuning the metal atom number of active centers is gradually getting attention. In this paper, the Co atom pair sites on N-doped porous carbon was engineered. The binuclear Co2 site structure was identified by aberration-corrected scanning transmission electron microscopy and X-ray absorption spectroscopy. As expected, the Co2NC display an outstanding Fenton-like catalysis activity in tetracycline degradation with turnover frequency exceeding 0.91 min-1 that is approximately 4 times higher than the conventional CoN4 site. The EPR tests indicated that the ROS strength stimulated by the binuclear site was much stronger than that of single site. Theoretical density functional theory calculations reveal that the optimized adsorption configuration is the O1 of peroxymonosulfate (PMS) interacting with two Co atoms, leading to stronger interaction effect and electron transfer for PMS comparing to single atom sites.

Insights into mechanism of peroxymonosufate activation by Mo single-atom catalysts: Singlet oxygen evolution and role of Mo-N coordination

Recently, the Fenton-like reaction using peroxymonosulfate (PMS) has been acknowledged as a potential method for breaking down organic pollutants. In this study, we successfully synthesized a highly efficient and stable single atom molybdenum (Mo) catalyst dispersed on nitrogen-doped carbon (Mo-NC-0.1). This catalyst was then utilized for the first time to activate PMS and degrade bisphenol A (BPA). The Mo-NC-0.1/PMS system demonstrated the ability to completely degrade BPA within just 20 min. Scavenging tests and density functional theory (DFT) calculations have demonstrated that the primary reactive oxygen species was singlet oxygen (1O2) produced by Mo-N4 sites. The self-cycling of Mo facilitated PMS activation and the transition from a free radical activation pathway to a non-radical pathway mediated by 1O2. Simultaneously, the nearby pyridinic N served as adsorption sites to immobilize BPA and PMS molecules. The exceptionally high catalytic activity of Mo-NC-0.1 derived from its unique Mo-N coordination, which markedly reduced the distance for 1O2 to migrate to the BPA molecules. The Mo-NC-0.1/PMS system effectively reduced the acute toxicity of BPA and exhibited excellent cycling stability with minimal leaching. This study presented a new catalyst with high selectivity for 1O2 generation and provided valuable insights for the application of single atom catalysts in PMS-based AOPs.

Advances in Atomically Dispersed Metal and Nitrogen Co-Doped Carbon Catalysts for Advanced Oxidation Technologies and Water Remediation: From Microenvironment Modulation to Non-Radical Mechanisms

Atomically dispersed metal and nitrogen co-doped carbon catalysts (M-N-C) have been attracting tremendous attentions thanks to their unique MNx active sites and fantastic catalytic activities in advanced oxidation technologies (AOTs) for water remediation. However, precisely tailoring the microenvironment of active sites at atomic level is still an intricate challenge so far, and understanding of the non-radical mechanisms in persulfate activation exists many uncertainties. In this review, latest developments on the microenvironment modulation strategies of atomically dispersed M-N-C catalysts including regulation of central metal atoms, regulation of coordination numbers, regulation of coordination heteroatoms, and synergy between single-atom catalysts (SACs) with metal species are systematically highlighted and discussed. Afterwards, progress and underlying limitations about the typical non-radical pathways from production of singlet oxygen, electron transfer mechanism to generation of high-valent metal species are well demonstrated to inspire intrinsic insights about the mechanisms of M-N-C/persulfate systems. Lastly, perspectives for the remaining challenges and opportunities about the further development of carbon-based SACs in environment remediation are also pointed out. It is believed that this review will be much valuable for the further design of active sites in M-N-C/persulfate catalytic systems and promote the wide application of SACs in various fields.

Understanding the Distance Effect of the Single-Atom Active Sites in Fenton-Like Reactions for Efficient Water Remediation

Emerging single-atom catalysts (SACs) are promising in water remediation through Fenton-like reactions. Despite the notable enhancement of catalytic activity through increasing the density of single-atom active sites, the performance improvement is not solely attributed to the increase in the number of active sites. The variation of catalytic behaviors stemming from the increased atomic density is particularly elusive and deserves an in-depth study. Herein, single-atom Fe catalysts (FeSA-CN) with different distances (dsite) between the adjacent single-atom Fe sites are constructed by controlling Fe loading. With the decrease in dsite value, remarkably enhanced catalytic activity of FeSA-CN is realized via the electron transfer regime with peroxymonosulfate (PMS) activation. The decrease in dsite value promotes electronic communication and further alters the electronic structure in favor of PMS activation. Moreover, the two adjacent single-atom Fe sites collectively adsorb PMS and achieve single-site desorption of the PMS decomposition products, maintaining continuous PMS activation and contaminant removal. Moreover, the FeSA-CN/PMS system exhibits excellent anti-interference performance for various aquatic systems and good durability in continuous-flow experiments, indicating its great potential for water treatment applications. This study provides an in-depth understanding of the distance effect of single-atom active sites on water remediation by designing densely populated SACs.

Traditional Herb (Moxa) Modified Zinc Oxide Nanosheets for Quick, Efficient and High Tissue Penetration Therapy of Fungal Infection

Fungal infection possesses the characteristics of high invasion depth and easy formation of a biofilm under the skin, which greatly hinders the treatment process. Here, traditional Chinese medicine moxa is carbonized and modified with zinc oxide (ZnO) nanosheets to synthesize carbonized moxa@ZnO (CMZ) with the dual response properties of yellow light (YL) and ultrasound (US) for synergistic antifungal therapy. CMZ with narrow bandgap can respond to long-wavelength YL that is highly safe and helpful for skin repair. Simultaneously, CMZ with a piezoelectric effect can further enhance the photocatalytic efficiency under the stimulation of US with high tissue penetration. Gene mechanism investigation indicates that when exposed to US and YL irradiation, CMZ-based therapy can adjust the expression of genes associated with fungal virulence, metabolic activity, mycelial growth and biofilm development, thus efficaciously eradicating planktonic Candida albicans (C. albicans) and mature biofilm. Importantly, despite the 1.00 cm thick tissue barrier, CMZ can rapidly eliminate 99.9% of C. albicans within 4 min, showing a satisfactory deep fungicidal efficacy. The in vivo therapeutic effect of this strategy is demonstrated in both open wound and deep cutaneous infection tests, speaking of dramatically better efficacy than the traditional fungicide ketoconazole (KTZ).

Facilitating Proton Coupled Electron Transfer Reaction through the Interfacial Micro Electric Field with Fe─N4 ─C in FeMOFs Glass

The proton-coupled electron transfer(PCET) reaction plays a crucial role in the chemical transformation process andhas become one of the most concerned elementary reactions. However, the complex kinetics of PCET reaction, which requires the simultaneous transfer of protons and electrons, leads to the dilemma that thermodynamics and kinetics cannot bebalanced and restricts its further development. In this, an interface micro-electric field (IMEF) basedon Fe─N4 in FeMOFs (Fe-Based Metal-Organic Frameworks) glass is designed tosynchronize proton/electron interface behavior for the first time to realizeefficient PCET reaction and optimize reaction thermodynamics and kinetics. The IMEF facilitates the separation of photogenerated electrons and holes, and accelerates Fe(III)/Fe(II) cycle. Driven by near-surface electric field force, the protons near surfacemigrate to Fe sites and participate in Fe(IV)═O formation and reaction, lowering the reaction energy barrier. Based on the interface regulation ofIMEF, a high-efficiency PCET reaction is realized, and kinetic reactionrate constant of photocatalytic oxidation of emerging contaminants is increasedby 3.7 times. This study highlights a strategy for IMEFs to modulate PEC Treactions for a wide range of potential applications, including environmental and ecological applications.

Efficient activation of peroxymonosulfate by Fe single-atom: The key role of Fe-pyrrolic nitrogen coordination in generating singlet oxygen and high-valent Fe species

Nitrogen-doped carbon matrix single-atom catalysts (SACs) for the efficient removal of organic pollutants have attracted widespread attention. However, the ligand structure and the origin of the high activity between nitrogen species and single-atoms remain elusive. Herein, nitrogen-doped carbon matrix iron single-atom catalysts (Fe/NC-SACs) that exhibit high catalytic reactivity (98.2% SMX degradation in 5 min), broad pH resistance (pH 3.0-11.1), high stability, and sustainable water treatment capacity are reported. High-valent iron (Fe IV=O) and singlet oxygen (1O2) were the reactive oxygen species observed. The electrochemical results demonstrated the generation of catalyst-PMS complexes. The DFT calculations revealed that Fe-pyrrolic N4 was the best ligand for PMS, exhibiting the highest adsorption energy, bond length variation and electron transfer capacity. The central Fe single atom and the carbon electrons adjacent to the pyrrolic N were the reactive sites of the PMS. The main source of 1O2 was the oxidation of PMS. This work provides guidance for the discovery of high-performance catalysts and provides a single-atom catalyst that can be used for practical environmental purification.

In the View of Electrons Transfer and Energy Conversion: The Antimicrobial Activity and Cytotoxicity of Metal-Based Nanomaterials and Their Applications

The global pandemic and excessive use of antibiotics have raised concerns about environmental health, and efforts are being made to develop alternative bactericidal agents for disinfection. Metal-based nanomaterials and their derivatives have emerged as promising candidates for antibacterial agents due to their broad-spectrum antibacterial activity, environmental friendliness, and excellent biocompatibility. However, the reported antibacterial mechanisms of these materials are complex and lack a comprehensive understanding from a coherent perspective. To address this issue, a new perspective is proposed in this review to demonstrate the toxic mechanisms and antibacterial activities of metal-based nanomaterials in terms of energy conversion and electron transfer. First, the antimicrobial mechanisms of different metal-based nanomaterials are discussed, and advanced research progresses are summarized. Then, the biological intelligence applications of these materials, such as biomedical implants, stimuli-responsive electronic devices, and biological monitoring, are concluded based on trappable electrical signals from electron transfer. Finally, current improvement strategies, future challenges, and possible resolutions are outlined to provide new insights into understanding the antimicrobial behaviors of metal-based materials and offer valuable inspiration and instructional suggestions for building future intelligent environmental health.

Generation and identification of 1O2 in catalysts/peroxymonosulfate systems for water purification

Catalysts for peroxymonosulfate (PMS) activation are appealing in the purification of organic wastewater. Singlet oxygen (1O2) is widely recognized as a crucial reactive species for degrading organic contaminants in catalysts/PMS systems due to its adamant resistance to inorganic anions, high selectivity, and broad pH applicability. With the rapid growth of studies on 1O2 in catalysts/PMS systems, it becomes necessary to provide a comprehensive review of its current state. This review highlights recent advancements concerning 1O2 in catalysts/PMS systems, with a primary focus on generation pathways and identification methods. The generation pathways of 1O2 are summarized based on whether (distinguished by the geometric structures of metal species) or not (distinguished by the active sites) the metal element is included in the catalysts. Furthermore, this review thoroughly discusses the influence of metal valence states and metal species with different geometric structures on 1O2 generation. Various potential strategies are explored to regulate the generation of 1O2 from the perspective of catalyst design. Identification methods of 1O2 primarily include electron paramagnetic resonance (EPR), quenching experiments, reaction in D2O solution, and chemical probe tests in catalysts/PMS systems. The principles and applications of these methods are presented comprehensively along with their applicability, possible disagreements, and corresponding solutions. Besides, an identifying procedure on the combination of main identification methods is provided to evaluate the role of 1O2 in catalysts/PMS systems. Lastly, several perspectives for further studies are proposed to facilitate developments of 1O2 in catalysts/PMS systems.

Catalytic activity and reaction mechanisms of single-atom metals anchored on nitrogen-doped carbons for peroxymonosulfate activation

Single-atom catalysts have attracted tremendous interests in peroxymonosulfate (PMS)-based advanced oxidation processes due to their maximum atom utilization and high reactivity, however the role of nitrogen-coordinated metal (MNx) sites with different metal centers remain blurred. Herein, a series of single-atom metals anchored on nitrogen-doped carbons (denoted as M-N/C, M = Fe, Co, Cu, and Mn) using zeolitic imidazolate frameworks as precursors are constructed for PMS activation. Their catalytic activity order follows Fe > Co > undoped N/C > Cu > Mn, especially the degradation rates of the eight model pollutants for Fe-N/C and Co-N/C are 2.5-22.4 and 1.5-19.5 times higher than those for undoped N/C, respectively. Moreover, the nature of catalytic metal center can govern the degradation behaviors in the coexisting water constituents. Experimental and theoretical results reveal that singlet oxygen (1O2) is the main oxidant responsible for pollutant degradation and its evolution path over FeN4 or CoN4 sites (PMS→OH*→*O→1O2) is elucidated, between which FeN4 with lower energy barrier is more conducive to 1O2 generation. This study can not only provide guidance for the development of highly active atomic M-N/C catalysts, but also lead to a better molecular-level understanding of PMS activation mechanism over MN4 sites.

Modulation of ultrathin nanosheet structure and nitrogen defects in graphitic carbon nitride for efficient photocatalytic bacterial inactivation

The efficient generation and utilization of ROSs is a key step in determining the achievement of safe drinking water by photocatalytic bacterial inactivation technology. Although graphitic carbon nitride (g-C3N4) serves as a green and promising photocatalyst for water disinfection, insufficient bacterial capturing capacity and serious charge recombination of pristine g-C3N4 extremely restrict its bactericidal activity. Herein, we develop a facile thermal exfoliation and thermal polymerization method to prepare the nitrogen-defective ultrathin g-C3N4 nanosheets (DUCN-500). Our results showed that ultrathin nanosheet structure greatly enhanced bacterial capturing capacity of g-C3N4 to increase the utilization efficiency of ROS, which contributed to the performance of DUCN-500 greatly outperforming bulk g-C3N4. The nitrogen defects increased ROS generation (·O2- and H2O2) by approximately 4.6 times, which was attributed to negative shift of the conduction band potential and rapid separation of charge carriers. The DUCN-500 could rapidly and completely inactivate Escherichia coli and Bacillus subtilis in real sewage under simulated solar irradiation, accompanied by good anti-interference capability and stability. Additionally, bacterial morphology destruction, the loss of antioxidant enzyme activity and the leakage of protein were proven to be the main mechanisms of photocatalytic sterilization. This study offers new insight into the rational design of efficient g-C3N4-based photocatalysts for water disinfection.

Guest Molecule Insertion-Optimized d-Band Center Position in MoS2 with Improved Sulfite Activation Ability Inspired by Sulfite Oxidase

As a prospective member in the family of advanced oxidation processes (AOPs), heterogeneous sulfite activation shows low cost and high safety for poisonous organic pollutants' degradation. To obtain an efficient sulfite activator, sulfite oxidase (SuO_x), a molybdenum-based enzyme that can prompt oxidation and activation of sulfite, inspired us greatly. Based on the structure of SuO_x, MoS₂/BPE (BPE = 1, 2-bis-(4-pyridyl)-ethylene) is synthesized successfully. In MoS₂/BPE, the BPE molecule is inserted between the MoS₂ layers as a pillar and the N atom links with Mo⁴⁺ directly. MoS₂/BPE shows excellent SuO_x mimic activity. Theoretical calculation implies that BPE insertion optimizes the d-band center position of MoS₂/BPE, which regulates the interaction between MoS₂ and *SO₄^2-. This prompts ^•SO₄^- generation and organic pollutants' degradation. At pH 7.0, its tetracycline degradation efficiency achieved is 93.9% in 30 min. Furthermore, its sulfite activation ability also endows MoS₂/BPE with excellent antibiofouling performance because ^•SO₄^- can kill the microorganisms in water effectively. This work develops a new sulfite activator based on SuO_x. The connection between structure and SuO_x mimic activity and sulfite activation ability is clarified in detail.

Enhanced visible light assisted peroxymonosulfate process by biochar in-situ enriched with γ-Fe2O3 for p-chlorophenol degradation: performance, mechanism and DFT calculation

In this study, a novel γ-Fe₂O₃/biochar (BF_γ) composite by a plant in-situ enrichment and one-step pyrolysis strategy was prepared, which was applied as a photocatalyst to activate peroxymonosulfate (PMS) for the degradation of p-chlorophenol (4-CP) under visible light irradiation (BF_γ/PMS/Vis) system. The characterization results exhibited that γ-Fe₂O₃ with localized carbon doping was evenly embedded in biochar during the pyrolysis. BF_γ exhibited better photoresponse properties than biochar (BC) and γ-Fe₂O₃. The removal efficiency of this system for 4-CP reached 96.41% under optimal conditions. This system showed high removal efficiency with a wide pH range (3.0-13.0) and under conditions of different organic pollutants. It also showed strong resistance to interference with co-existing inorganic ions and humic acid (HA). Electron paramagnetic resonance (EPR) and radical scavenging experiments revealed that the reactive oxygen species (ROS) in this system included SO₄^-·, ·OH, ·O₂^- and ¹O₂. The density functional theoretical (DFT) calculations further revealed the promotion of localized carbon doping in γ-Fe₂O₃ on electron transfer and photoresponse, including C-O bond (d=1.29 Å), C-Fe bond (d=1.80 Å) and band gap value (E_gap < 0.72 eV). This study provides new insights into constructing environmentally-friendly catalysts and the possibility of the solid waste recycling for other wetland plants.

Synergistic Effect of Fe Single-Atom Catalyst for Highly Efficient Microwave-Stimulated Remediation of Chloramphenicol-Contaminated Soil

Chloramphenicol (CAP) has long been used extensively in agriculture and is severely toxic to the biological environment. Microwave catalysis appears a promising method for soil remediation due to its fast and effective heat transfer, but it is challenging to prepare catalysts with good electromagnetic wave absorption and robust catalytic activity. In this study, atomically dispersed Fe on three-dimensional N-doped carbon supports (3D Fe-NC) is firstly used for microwave remediation of soil. Thanks to the synergistic effect of microwave "hot spots" and reactive oxygen species (•OH, •O₂ ^- ), 3D Fe-NC can completely remove 99.9% of CAP in 5 min. The removal rate constant is nearly twice that of commercial activated carbon. Significantly, the germination rate of lettuce seeds in microwave-repaired soil contaminated by CAP reaches 70%. This work demonstrates the application of Fe single-atom catalyst in microwave remediation of contaminated soil, providing a novel insight for agricultural soil remediation.

Fe Single-Atom Catalyst for Cost-Effective yet Highly Efficient Heterogeneous Fenton Catalysis

High energy consumption in pyrolyzing precursors for catalyst preparation would limit the application of nitrogen-doped carbon-based single-atom catalysts in actual pollutant remediation. Herein, we report an Fe single atom (7.67 wt %) loaded polyaniline catalyst (Fe-PANI) prepared via a simple impregnation process without pyrolysis. Both experimental characterizations and density functional theory calculations demonstrated that isolated -N═ group sites can fasten Fe atoms through Fe-N coordination in PANI, leading to a high stability of Fe atoms in a heterogeneous Fenton reaction. Highly dispersive yet dense -N═ groups in PANI can be protonated to be adsorption sites, which largely reduce the migration distance between reactive radicals and organics. More significantly, frontier molecular orbitals and spin-density distributions reveal that electrons can transfer from reduction groups of PANI to an Fe(III) site to accelerate its reduction. As a result, a remarkably boosted degradation behavior of organics under near-neutral conditions (pH 6), with low H₂O₂ concentration, was achieved. This cost-effective Fe-PANI catalyst with high catalytic activity, stability, and adsorption performance has great potential for industrial-level wastewater treatment.

Single-atom catalysts based on Fenton-like/peroxymonosulfate system for water purification: design and synthesis principle, performance regulation and catalytic mechanism

Novel single-atom catalysts (SACs) have become the frontier materials in the field of environmental remediation, especially wastewater purification because of their nearly 100% ultra-high atomic utilization and excellent properties. SACs can be used in Fenton-like catalytic reactions to activate various peroxides (such as hydrogen peroxide (H₂O₂), ozone (O₃), and persulfate (PSs)) to release active radicals and non-radicals, acting on target pollutants, and realize their decomposition and mineralization. Among them, peroxymonosulfate (PMS) in PS systems has gradually become an important oxidant in Fenton-like processes due to its asymmetric molecular structure and characteristics of easy storage and transportation. Focusing on the numerous proposed strategies for the synthesis and performance regulation of Fenton-like SACs, it has been confirmed that the coordination of isolated metal atoms and the support/carrier enhances the structural robustness and chemical stability of these catalysts and optimizes their catalytic activity and kinetics. Moreover, the tunability of the coordination environment and electronic properties of SACs can improve their other catalytic properties, such as cycle stability and selectivity. Thus, to systematically explain the relationship between the active center, catalyst performance and the corresponding potential catalytic mechanism, herein, we focus on the representative scientific work on the preparation strategy, catalytic application and performance regulation of Fenton-like SACs. Specifically, we review the typical Fenton-like SAC reaction processes and catalytic mechanisms for the degradation of refractory organic compounds in advanced oxidation processes (AOPs). Finally, the future development and challenges of Fenton-like SACs are presented.

Engineering single-atom catalysts toward biomedical applications

Due to inherent structural defects, common nanocatalysts always display limited catalytic activity and selectivity, making it practically difficult for them to replace natural enzymes in a broad scope of biologically important applications. By decreasing the size of the nanocatalysts, their catalytic activity and selectivity will be substantially improved. Guided by this concept, the advances of nanocatalysts now enter an era of atomic-level precise control. Single-atom catalysts (denoted as SACs), characterized by atomically dispersed active sites, strikingly show utmost atomic utilization, precisely located metal centers, unique metal-support interactions and identical coordination environments. Such advantages of SACs drastically boost the specific activity per metal atom, and thus provide great potential for achieving superior catalytic activity and selectivity to functionally mimic or even outperform natural enzymes of interest. Although the size of the catalysts does matter, it is not clear whether the guideline of "the smaller, the better" is still correct for developing catalysts at the single-atom scale. Thus, it is clearly a new, urgent issue to address before further extending SACs into biomedical applications, representing an important branch of nanomedicine. This review begins by providing an overview of recent advances of synthesis strategies of SACs, which serve as a basis for the discussion of emerging achievements in improving the enzyme-like catalytic properties at an atomic level. Then, we carefully compare the structures and functions of catalysts at various scales from nanoparticles, nanoclusters, and few-atom clusters to single atoms. Contrary to conventional wisdom, SACs are not the most catalytically active catalysts in specific reactions, especially those requiring multi-site auxiliary activities. After that, we highlight the unique roles of SACs toward biomedical applications. To appreciate these advances, the challenges and prospects in rapidly growing studies of SACs-related catalytic nanomedicine are also discussed in this review.

Fe–FeOx nanoparticles encapsulated in N-doped carbon material: a facile catalyst for selective synthesis of quinazolines from alcohols in water

A Fe–FeOx@NC catalyst with N-doped carbon encapsulated Fe–FeOx nanoparticles has excellent performance in the synthesis of quinazolines.