In Situ Grown Co-Based Interstitial Compounds: Non-3d Metal and Non-Metal Dual Modulation Boosts Alkaline and Acidic Hydrogen Electrocatalysis

Cation/anion-doping induced electronic structure modulation of CoMoO4 for enhanced hydrogen evolution

The design and fabrication of high-performance, inexpensive and durable electrocatalyst toward hydrogen evolution reaction (HER) is supremely significant for alleviating energy crisis and environmental concerns, but still remaining challenging. Herein, we develop an experimental work based on etching and reduction strategy to reveal the remarkable effect of cation/anion co-doping in CoMoO4 on its intrinsic HER activity. The CoMoO4 with Fe and B incorporation (Fe/B-CoMoO4) exhibits a current density of 10 mA cm-2 with strikingly low potential of 38 mV coupling with Tafel slope of 51 mV dec-1, and manifesting a robust durability for 100 h with no attenuation, which is comparable to the state-of-the-art commercial Pt/C catalyst. The collective experimental and theoretical findings concomitantly illustrate that the enhanced performances are due to the strong synergistic effect resulting from the co-doping of Fe and B, which plays a pivotal role in finely tuning the electronic structure of CoMoO4, further optimizing the adsorption free energy of H intermediates and shifting the center of the d-band of Fe/B-CoMoO4 away from the Fermi level. This fantastic work highlights the critical role of foreign element incorporating for optimizing electronic structure of transition metal oxides toward HER, and offers valuable guiding principles for rational design of more efficient energy conversion devices.

High-efficiency electrochemical nitrate reduction to ammonia via boron-doped hydroxyl oxide cobalt induced electron delocalization

Electrochemical nitrate reduction to ammonia is a promising alternative strategy for producing valuable ammonia. This prospective route, however, is subject to a slow electrocatalytic rate, which resulted from the weak adsorption and activation of intermediate species, and the low density electron cloud of active centers. To address this issue, we developed a novel approach by doping boron into metal hydroxyl oxides to adjust the electronic structure of active centers, and consequently, led a significant improvement in the Faraday efficiency upto approaching 100 %, as well as an impressive ammonia yield upto approximately 23 mg/h mgcat-1 at -0.6 V vs. reversible hydrogen electrode (RHE). Experimental data in mechanism demonstrate that the doped boron play a crucial role in modulating the local electronic environment surrounding the active sites Co. In situ Raman and FTIR spectra provide evidences that boron facilitates the formation of deoxidation and hydrogenation intermediates. Additionally, density functional theory (DFT) calculations support the notion that boron doping enhances the adsorption capability of intermediates, reduces the reaction barrier, and facilitates the desorption of NH3.

Phase Engineering and Dispersion Stabilization of Cobalt toward Enhanced Hydrogen Evolution

Phase engineering is promising to increase the intrinsic activity of the catalyst toward hydrogen evolution reaction (HER). However, the polymorphism interface is unstable due to the presence of metastable phases. Herein, phase engineering and dispersion stabilization are applied simultaneously to boost the HER activity of cobalt without sacrificing the stability. A fast and facile approach (plasma cathodic electro deposition) is developed to prepare cobalt film with a hetero-phase structure. The polymorphs of cobalt are realized through reduced stacking fault energy due to the doping of Mo, and the high temperature treatment resulted from the plasma discharge. Meanwhile, homogeneously dispersed oxide/carbide nanoparticles are produced from the reaction of plasma-induced oxygen/carbon atoms with electro-deposited metal. The existence of rich polymorphism interface and oxide/carbide help to facilitate H2 production by the tuning of electronic structure and the increase of active sites. Furthermore, oxide/carbide dispersoid effectively prevents the phase transition through a pinning effect on the grain boundary. As-prepared Co-hybrid/CoO_MoC exhibits both high HER activity and robust stability (44 mV at 10 mA cm-2, Tafel slope of 53.2 mV dec-1, no degradation after 100 h test). The work reported here provides an alternate approach to the design of advanced HER catalysts for real application.

Surface Reconstruction Regulation of Co3N Through Heterostructure Engineering Toward Efficient Oxygen Evolution Reaction

Oxygen evolution reaction (OER) electrocatalysts generally experience structural and electronic modifications during electrocatalysis. This phenomenon, referred to as surface reconstruction, results in the formation of catalytically active species that act as real OER sites. Controlling surface reconstruction therefore is vital for enhancing the OER performance of electrocatalysts. In this study, a new approach is introduced of heterostructure engineering to facilitate the surface reconstruction of target catalysts. Using MnCo carbonate hydroxide (MnCo─CH)@Co3N as a demonstration, it is discovered that the surface reconstruction occurs more readily and rapidly on MnCo─CH@Co3N than on Co3N. More interestingly, during the reconstruction process, Mn species migrate to the surface, enabling the in situ formation of highly active Mn-doped CoOOH. Consequently, the MnCo─CH@Co3N catalyst after reconstruction exhibits a low overpotential of 257 mV at 10 mA cm-2, compared to 379 mV of individual Co3N. This work offers fresh perspectives on understanding the enhanced OER performance of heterostructure electrocatalysts and the role of heterostructure in promoting surface reconstruction.

Cobalt-Based Nanoscale Material: An Emerging Electrocatalyst for Hydrogen Production

Modern civilization has been highly suffering from energy crisis and environmental pollutions. These two burning issues are directly and indirectly created from fossil fuel consumption and uncontrolled industrialization. The above critical issue can be solved through the proper utilization of green energy sources where no greenhouse gases will be generated upon burning of such materials. Hydrogen is the most eligible candidate for this purpose. Among various methods of hydrogen generation, electrocatalytic process is one of the most efficient methods because of easy handling and high efficiency. In these aspects Co-based nanomaterials are considered to be extremely significant as they can be utilized as efficient, recyclable and ideal catalytic system. In this article a series of Co-based nano-electrocatalysts has been discussed with proper structure-property relationship and their medium dependency. Therefore, such type of stimulating summary on recently reported electrocatalysts and their activity may be helpful for scientists of the corresponding field as well as for broader research communities. This can be inspiration for materials researchers to fabricate active catalysts for the production of hydrogen gas in room temperature.

Recent Progress on Copper-Based Bimetallic Heterojunction Catalysts for CO2 Electrocatalysis: Unlocking the Mystery of Product Selectivity

Copper-based bimetallic heterojunction catalysts facilitate the deep electrochemical reduction of CO2 (eCO2RR) to produce high-value-added organic compounds, which hold significant promise. Understanding the influence of copper interactions with other metals on the adsorption strength of various intermediates is crucial as it directly impacts the reaction selectivity. In this review, an overview of the formation mechanism of various catalytic products in eCO2RR is provided and highlight the uniqueness of copper-based catalysts. By considering the different metals' adsorption tendencies toward various reaction intermediates, metals are classified, including copper, into four categories. The significance and advantages of constructing bimetallic heterojunction catalysts are then discussed and delve into the research findings and current development status of different types of copper-based bimetallic heterojunction catalysts. Finally, insights are offered into the design strategies for future high-performance electrocatalysts, aiming to contribute to the development of eCO2RR to multi-carbon fuels with high selectivity.

NiFe Nanoparticle Nest Supported on Graphene as Electrocatalyst for Highly Efficient Oxygen Evolution Reaction

Designing cost-efffective electrocatalysts for the oxygen evolution reaction (OER) holds significant importance in the progression of clean energy generation and efficient energy storage technologies, such as water splitting and rechargeable metal-air batteries. In this work, an OER electrocatalyst is developed using Ni and Fe precursors in combination with different proportions of graphene oxide. The catalyst synthesis involved a rapid reduction process, facilitated by adding sodium borohydride, which successfully formed NiFe nanoparticle nests on graphene support (NiFe NNG). The incorporation of graphene support enhances the catalytic activity, electron transferability, and electrical conductivity of the NiFe-based catalyst. The NiFe NNG catalyst exhibits outstanding performance, characterized by a low overpotential of 292.3 mV and a Tafel slope of 48 mV dec-1, achieved at a current density of 10 mA cm- 2. Moreover, the catalyst exhibits remarkable stability over extended durations. The OER performance of NiFe NNG is on par with that of commercial IrO2 in alkaline media. Such superb OER catalytic performance can be attributed to the synergistic effect between the NiFe nanoparticle nests and graphene, which arises from their large surface area and outstanding intrinsic catalytic activity. The excellent electrochemical properties of NiFe NNG hold great promise for further applications in energy storage and conversion devices.

Bi-cation incorporated Ni3N nanosheets boost water dissociation kinetics for enhanced alkaline hydrogen evolution activity

Nickel nitride (Ni3N) is a promising electrocatalyst for the hydrogen evolution reaction (HER) owing to its excellent metallic features and has been demonstrated to exhibit considerable activity for water oxidation. However, its undesirable characteristics as an HER electrocatalyst due to its poor unfavourable d-band energy level significantly limit its water dissociation kinetics. Herein, the HER electrocatalytic activity of Ni3N was prominently enhanced via the simultaneous incorporation of bi-cations (vanadium (V) and iron (Fe), denoted as V-Fe-Ni3N). The optimized V-Fe-Ni3N displays impressive performance with an overpotential of 69 mV at 10 mA cm-2 and good stability in 1.0 M KOH, which is remarkably better than pristine Ni3N, V-doped Ni3N, and Fe-doped Ni3N and considerably closer to a commercial Pt/C catalyst. Based on density functional theory (DFT) studies, V and Fe atoms not only serve as active sites for promoting water dissociation kinetics but also tune the electronic structure of Ni3N to achieve optimized hydrogen adsorption capabilities. This work presents an inclusive understanding of the rational designing of high-performance transition metal nitride-based electrocatalysts for hydrogen production. Its electrocatalytic performance can be significantly enhanced by doping transition metal cations.

Co3Fe7/CoCx nanoparticles encapsulated in nitrogen-doped carbon nanotubes synergistically promote the oxygen reduction reaction in Zn-air batteries

Efficient and stable non-precious metal catalysts (NPMCs) for the oxygen reduction reaction (ORR) are crucial for the advancement of Zn-air batteries. Herein, we report a supramolecular self-scarifying template and confinement pyrolysis strategy to obtain an efficient ORR catalyst of well-dispersed Co3Fe7/CoCx heterostructure nanoparticles encapsulated by nitrogen-doped carbon nanotubes (Co3Fe7/CoCx@N-CNT). The as-synthesized Co3Fe7/CoCx@N-CNT catalyst exhibited outstanding ORR activity, with a half-wave potential of 0.88 V versus a reversible hydrogen electrode, and good stability. The Zn-air battery based on the Co3Fe7/CoCx@N-CNT cathode achieved a peak power density of 265 mW cm-2 and a durability of over 200 h, which is superior to most reported NPMCs and even the Pt/C counterpart. The physical characterization and electrochemical poisoning experiments revealed that the Co3Fe7/CoCx nanoparticles in the core along with pyridine N and Fe-Nx hosted in the carbon nanotube all acted as active sites for the ORR. Further theoretical calculations showed that the charge redistribution between the Co3Fe7/CoCx nanoparticles and the Fe-Nx carbon overlayers downshifted the d-band center of Fe and optimized the adsorption ability, which boosted the ORR kinetics. This work provides an effective strategy to synthesize non-precious metal ORR catalysts with multiple active sites and highlights the synergistic role of encapsulated nanoparticles and carbon support.

Fe nanoparticles confined by multiple-heteroatom-doped carbon frameworks for aqueous Zn-air battery driving CO2 electrolysis

Metal-organic frameworks (MOF) derived carbon materials are considered to be excellent conductive mass transfer substrates, and the large specific surface area provides a favorable platform for loading metal nanoparticles. Tuning the coordination of metals through polyacid doping to change the MOF structure and specific surface area is an advanced strategy for designing catalysts. Modification of Fe-doped ZIF-8 pre-curing by pyrolysis of phosphomolybdic acid hydrate (PMo), Fe nanoparticles confined by Mo and N co-doped carbon frameworks (Fe-NP/MNCF) were fabricated, and the impact of PMo doping on the shape and functionality of the catalysts was investigated. The Zn-air battery (ZAB) driven CO2 electrolysis was realized by using Fe-NP/MNCF, which was used as bifunctional oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO2RR) catalysts. The results show that the half-wave potential (E1/2) of Fe-NP/MNCF is 0.89 V, and the limiting diffused current density (jL) is 6.4 mA cm-2. The ZAB constructed by Fe-NP/MNCF shows a high specific capacity of 794.8 mAh gZn-1, a high open-circuit voltage (OCV) of 1.475 V, and a high power density of 111.6 mW cm-2. Fe-NP/MNCF exhibited efficient CO2RR performance with high CO Faraday efficiency (FECO) of 87.5 % and current density for the generation of carbon dioxide (jCO) of 10 mA cm-2 at -0.9 V vs RHE. ZAB-driven CO2RR had strong catalytic stability. These findings provide new methods and techniques for the preparation of advanced carbon-based catalysts from MOFs.

Efficient Hydrogen Evolution on Antiperovskite CuNCo3 Nanowires by Mo Incorporation and its Trifunctionality for Zn Air Batteries and Overall Water Splitting

The current development of single electrocatalyst with multifunctional applications in overall water splitting (OWS) and zinc-air batteries (ZABs) is crucial for sustainable energy conversion and storage systems. However, exploring new and efficient low-cost trifunctional electrocatalysts is still a significant challenge. Herein, the antiperovskite CuNCo3 prototype, that is proved to be highly efficient in oxygen evolution reaction but severe hydrogen evolution reaction (HER) performance, is endowed with optimum HER catalytic properties by in situ-derived interfacial engineering via incorporation of molybdenum (Mo). The as-prepared Mo-CuNCo3 @CoN nanowires achieve a low HER overpotential of 58 mV@10 mA cm-2 , which is significantly higher than the pristine CuNCo3 . The assembled CuNCo3 -antiperovskite-based OWS not only entails a low overall voltage of 1.56 V@10 mA cm-2 , comparable to most recently reported metal-nitride-based OWS, but also exhibits excellent ZAB cyclic stability up to 310 h, specific capacity of 819.2 mAh g-1 , and maximum power density of 102 mW cm-2 . The as-designed antiperovskite-based ZAB could self-power the OWS system generating a high hydrogen rate, and creating opportunity for developing integrated portable multifunctional energy devices.

Self-Powered Hydrogen Production with Improved Energy Efficiency via Polysulfides Redox

In the pursuit of efficient solar-driven electrocatalytic water splitting for hydrogen production, the intrinsic challenges posed by the sluggish kinetics of anodic oxygen evolution and intermittent sunlight have prompted the need for innovative energy systems. Here, we introduce an approach by coupling the polysulfides oxidation reaction with the hydrogen evolution reaction for energy-saving H2 production, which could be powered by an aqueous zinc-polysulfides battery to construct a self-powered energy system. This unusual hybrid water electrolyzer achieves 300 mA cm-2 at a low cell voltage of 1.14 V, saving electricity consumption by 100.4% from 5.47 to 2.73 kWh per m3 H2 compared to traditional overall water splitting. Benefiting from the favorable reaction kinetics of polysulfides oxidation/reduction, the aqueous zinc-polysulfides battery exhibits an energy efficiency of approximately 89% at 1.0 mA cm-2. Specially, the zinc-polysulfide battery effectively stores intermittent solar energy as chemical energy during light reaction by solar cells. Under an unassisted light reaction, the batteries could release energy to drive H2 production through a hybrid water electrolyzer for uninterrupted hydrogen production. Therefore, the aim of simultaneously generating H2 and eliminating the restrictions of intermittent sunlight is realized by combining the merits of polysulfides redox, an aqueous metal-polysulfide battery, and solar cells. We believe that this concept and utilization of polysulfides redox will inspire further fascinating attempts for the development of sustainable energy via electrocatalytic reactions.

Enhancing Overall Water Splitting via Anion and Cation Synergistical Modulation in NiS Amorphous Compound

Designing and synthesizing cost-effective catalysts that exhibit excellent performance of both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is a formidable task in the field of electrocatalysis. Herein, we present a Fe- and P-codoped NiS amorphous film catalyst (FeNiSP) via meticulous control over the cations and anions of metal compounds. The doped Fe and P increases active sites, reduces charge transfer resistance, and modulates electronic structures of the NiS matrix. Leveraging these advantages, the FeNiSP showcases exceptional bifunctional activities of HER and OER, with remarkably low overpotentials of only 135 and 330 mV for achieving a current density of 100 mA·cm-2 during HER and OER, respectively. Additionally, a low cell voltage of 1.56 V at 10 mA·cm-2 was achieved when it was employed as both the anode and the cathode for water splitting. Finally, density function theory calculations further elucidate that the simultaneous presence of Fe and P in the NiS amorphous film catalyst leads to a decrease in the band center of S and Ni. This consequential effect maintains a balanced adsorption/desorption of protons and strengthened the adsorption of O-based intermediates on the surface of FeNiSP, subsequently contributing to the outstanding electrocatalytic HER and OER activities.

Computational-Guided Design of Photoelectrode Active Materials for Light-Assisted Energy Storage

The design of a novel photoelectric integrated system is considered to be an efficient way to utilize and store inexhaustible solar energy. However, the mechanism of photoelectrode under illuminate conditions is still unclear. Density functional theory (DFT) provides standardized analysis and becomes a powerful way to explain the photoelectrochemical mechanism. Herein, the feasibility of four metal oxide configurations as photoelectrode materials by using a high throughput calculation method based on DFT are investigated. According to the photoelectrochemical properties, band structure and density of states are calculated, and the intercalate/deintercalate simulation is performed with adsorption configuration. The calculation indicates that the band gap of Fe2 CoO4 (2.404 eV) is narrower than that of Co3 O4 (2.553 eV), as well as stronger adsorption energy (-3.293 eV). The relationship between the electronic structure and the photoelectrochemical performance is analyzed and verified according to the predicted DFT results by subsequent experiments. Results show that the Fe2 CoO4 photoelectrode samples exhibit higher coulombic efficiency (97.4%) than that under dark conditions (94.9%), which is consistent with the DFT results. This work provides a general method for the design of integrated photoelectrode materials and is expected to be enlightening for the adjustment of light-assisted properties of multifunctional materials.

Recent Advances in Co-Based Electrocatalysts for Hydrogen Evolution Reaction

Water splitting is a promising technique in the sustainable "green hydrogen" generation to meet energy demands of modern society. Its industrial application is heavily dependent on the development of novel catalysts with high performance and low cost for hydrogen evolution reaction (HER). As a typical non-precious metal, cobalt-based catalysts have gained tremendous attention in recent years and shown a great prospect of commercialization. However, the complexity of the composition and structure of newly-developed Co-based catalysts make it urgent to comprehensively retrospect and summarize their advance and design strategies. Hence, in this review, the reaction mechanism of HER is first introduced and the possible role of the Co component during electrocatalysis is discussed. Then, various design strategies that could effectively enhance the intrinsic activity are summarized, including surface vacancy engineering, heteroatom doping, phase engineering, facet regulation, heterostructure construction, and the support effect. The recent progress of the advanced Co-based HER electrocatalysts is discussed, emphasizing that the application of the above design strategies can significantly improve performance by regulating the electronic structure and optimizing the binding energy to the crucial intermediates. At last, the prospects and challenges of Co-based catalysts are shown according to the viewpoint from fundamental explorations to industrial applications.

Low-Cost, High-Yield Zinc Oxide-Based Nanostars for Alkaline Overall Water Splitting

The investigation of high-efficiency and sustainable electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline media is critical for renewable energy technologies. Here, we report a low-cost and high-yield method to obtain ZnOHF-ZnO-based 2D nanostars (NSs) by means of chemical bath deposition (CBD). The obtained NSs, cast onto graphene paper substrates, were used as active materials for the development of a full water splitting cell. For the HER, NSs were decorated with an ultralow amount of Pt nanoparticles (11.2 μg cm-2), demonstrating an overpotential of 181 mV at a current density of 10 mA cm-2. The intrinsic activity of Pt was optimized, thanks to the ZnO supporting nanostructures, as outlined by the mass activity of Pt (0.9 mA mgPt-1) and its turnover frequency (0.27 s-1 for a Pt loading of 11.2 μg cm-2). For the OER, bare NSs showed a remarkable result of 355 mV at 10 mA cm-2 in alkaline media. Pt-decorated and bare NSs were used as the cathode and anode, respectively, for alkaline electrochemical water splitting, assessing a stable overpotential of 1.7 V at a current density of 10 mA cm-2. The reported data pave the way toward large-scale production of low-cost electrocatalysts for green hydrogen production.

Dynamic Changes of an Anodized FeNi Alloy during the Oxygen Evolution Reaction under Alkaline Conditions

An efficient and durable oxygen evolution reaction (OER) catalyst is necessary for the water-splitting process toward energy conversion. The OER through water oxidation reactions could provide electrons for H2O, CO2, and N2 reduction and produce valuable compounds. Herein, the FeNi (1:1 Ni/Fe) alloy as foam, after anodizing at 50 V in a two-electrode system in KOH solution (1.0 M), was characterized by Raman spectroscopy, diffuse reflectance spectroscopy (DRS), X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDX), transmission electron microscopy (TEM), high-angle annular dark-field imaging (HAADF)-scanning transmission electron microscopy (STEM) and used as an efficient and durable OER electrocatalyst in KOH solution (1.0 M). The overpotential for the onset of the OER based on extrapolation of the Tafel plot was 225 mV. The overpotentials for the current densities of 10 and 30 mA/cm2 are observed at 270 and 290 mV, respectively. In addition, a low Tafel slope is observed, 38.0 mV per decade, for the OER. To investigate the mechanism of the OER, in situ surface-enhanced Raman spectroscopy was used to detect FeNi hydroxide and characteristic peaks of H2O. Impurities in KOH can adsorb onto the electrode surface during the OER. Peaks corresponding to Ni(III) (hydr)oxide and FeO42- can be detected during the OER, but high-valent FeNi (hydr)oxides are unstable and reduce under the open circle potential. Metal hydroxide transformations during the OER and anion adsorption should be carefully considered. In addition, Fe3O4 may convert to γ-Fe2O3 during the OER. This study aims to offer logical perspectives on the dynamic changes that occur during the OER under alkaline conditions in an anodized FeNi alloy. These changes encompass variations in morphology, surface oxidation, the generation of high-valent species, and phase conversion during the OER.

Regulating Electronic Structure of Iron Nitride by Tungsten Nitride Nanosheets for Accelerated Overall Water Splitting

Two essential characteristics that are required for hybrid electrocatalysts to exhibit higher oxygen and hydrogen evolution reaction (OER and HER, respectively) activity are a favorable electronic configuration and a sufficient density of active sites at the interface between the two materials within the hybrid. In the present study, a hybrid electrocatalyst is introduced with a novel architecture consisting of coral-like iron nitride (Fe2 N) arrays and tungsten nitride (W2 N3 ) nanosheets that satisfies these requirements. The resulting W2 N3 /Fe2 N catalyst achieves high OER activity (268.5 mV at 50 mA cm-2 ) and HER activity (85.2 mV at 10 mA cm-2 ) with excellent long-term durability in an alkaline medium. In addition, density functional theory calculations reveal that the individual band centers experience an upshift in the hybrid W2 N3 /Fe2 N structure, thus improving the OER and HER activity. The strategy adopted here thus provides a valuable guide for the fabrication of cost-effective multi-metallic crystalline hybrids for use as multifunctional electrocatalysts.

Copper nanodot-embedded nitrogen and fluorine co-doped porous carbon nanofibers as advanced electrocatalysts for rechargeable zinc-air batteries

Porous carbon-based electrocatalysts for cathodes in zinc-air batteries (ZABs) are limited by their low catalytic activity and poor electronic conductivity, making it difficult for them to be quickly commercialized. To solve these problems of ZABs, copper nanodot-embedded N, F co-doped porous carbon nanofibers (CuNDs@NFPCNFs) are prepared to enhance the electronic conductivity and catalytic activity in this study. The CuNDs@NFPCNFs exhibit excellent oxygen reduction reaction (ORR) performance based on experimental and density functional theory (DFT) simulation results. The copper nanodots (CuNDs) and N, F co-doped carbon nanofibers (NFPCNFs) synergistically enhance the electrocatalytic activity. The CuNDs in the NFPCNFs also enhance the electronic conductivity to facilitate electron transfer during the ORR. The open porous structure of the NFPCNFs promotes the fast diffusion of dissolved oxygen and the formation of abundant gas-liquid-solid interfaces, leading to enhanced ORR activity. Finally, the CuNDs@NFPCNFs show excellent ORR performance, maintaining 92.5% of the catalytic activity after a long-term ORR test of 20000 s. The CuNDs@NFPCNFs also demonstrate super stable charge-discharge cycling for over 400 h, a high specific capacity of 771.3 mAh g^-1 and an excellent power density of 204.9 mW cm^-2 as a cathode electrode in ZABs. This work is expected to provide reference and guidance for research on the mechanism of action of metal nanodot-enhanced carbon materials for ORR electrocatalyst design.

Co3O4 with upshifted d-band center and enlarged specific surface area by single-atom Zr doping for enhanced PMS activation

In this work, single-atom Zr doping is demonstrated to be an effective strategy to enhance the catalytic performance of Co₃O₄ toward peroxymonosulfate (PMS) by modulating electronic structure and enlarging specific surface simultaneously. The d-band center of Co sites upshifts owing to different electronegativity of Co and Zr in the bonds of Co-O-Zr confirmed by density functional theory calculations, leading to enhanced adsorption energy of PMS and strengthened electron transfer from Co^(II) to PMS. The specific surface area of Zr-doped Co₃O₄ increases by 6 times due to the decrease of crystalline size. Consequently, the kinetic constant of phenol degradation with Zr-Co₃O₄ is 10 times higher than that with Co₃O₄ (0.31 vs. 0.029 min^-1). The relative surface specific kinetic constant of Zr-Co₃O₄ for phenol degradation is still 2.29 times higher than that of Co₃O₄ (0.00660 vs. 0.00286 g m^-2 min^-1). In addition, the potential practical applicability of 8Zr-Co₃O₄ was also confirmed by practical wastewater treatment. This study provides deep insights into modifying electronic structure and enlarging specific surface area to enhance the catalytic performance.

Interfacial engineering of Co5.47N/Mo5N6 nanosheets with rich active sites synergistically accelerates water dissociation kinetics for Pt-like hydrogen evolution

The development of highly efficient hydrogen evolution electrocatalysts with platinum-like activity requires precise control of active sites through interface engineering strategies. In this study, a heterostructured Co_5.47N/Mo₅N₆ catalyst (CoMoN_x) on carbon cloth (CC) was synthesized using a combination of dip-etching and vapor nitridation methods. The rough nanosheet surface of the catalyst with uniformly distributed elements exposes a large active surface area and provides abundant interface sites that serve as additional active sites. The CoMoN_x was found to exhibit exceptional hydrogen evolution reaction (HER) activity with a low overpotential of 44 mV at 10 mA cm^-2 and exceptional stability of 100 h in 1.0 M KOH. The CoMoN_x^(-)||RuO₂⁽⁺⁾ system requires only 1.81 V cell voltage to reach a current density of 200 mA cm^-2, surpassing the majority of previously reported electrolyzers. Density functional theory (DFT) calculations reveal that the strong synergy between Co_5.47N and Mo₅N₆ at the interface can significantly reduce the water dissociation energy barrier, thereby improving the kinetics of hydrogen evolution. Furthermore, the rough nanosheet architecture of the CoMoN_x catalyst with abundant interstitial spaces and multi-channels enhances charge transport and reaction intermediate transportation, synergistically improving the performance of the HER for water splitting.

In Situ Surface Restructuring of Amorphous Ni-Doped CoMo Phosphate-Based Three-Dimensional Networked Nanosheets: Highly Efficient and Durable Electrocatalyst for Overall Alkaline Water Splitting

Developing cost-efficient bifunctional electrocatalysts with high efficiency and durability for the production of green hydrogen and oxygen is a demanding and challenging research area. Due to their high earth abundance, transition metal-based electrocatalysts are alternatives to noble metal-based water splitting electrocatalysts. Herein, binder-free three-dimensional (3D) networked nanosheets of Ni-doped CoMo ternary phosphate (Pi) were prepared using a facile electrochemical synthetic strategy on flexible carbon cloth without any high-temperature heat treatment or complicated electrode fabrication. The optimized CoMoNiPi electrocatalyst delivers admirable hydrogen (η₁₀ = 96 mV) and oxygen (η₁₀ = 272 mV) evolution performances in 1.0 M KOH electrolyte. For overall water splitting in a two-electrode system, the present catalyst demands only 1.59 and 1.90 V to reach current densities of 10 and 100 mA/cm², respectively, which is lower than that of the Pt/C||RuO₂ couple (1.61 V @ 10 mA/cm², 2 V > @ 100 mA/cm²) and many other catalysts reported previously. Furthermore, the present catalyst delivers excellent long-term stability in a two-electrode system continuously over 100 h at a high current density of 100 mA/cm², exhibiting nearly 100% faradic efficiency. The unique 3D amorphous structure with high porosity, a high active surface area, and lower charge transfer resistance provides excellent overall water splitting. Notably, the amorphous structure of the present catalyst favors the in situ surface reconstruction during electrolysis and generates very stable surface-active sites capable of long-term performance. The present work provides a route for the preparation of multimetallic-Pi nanostructures for various electrode applications that are easy to prepare and have superior activity, high stability, and low cost.

Phase Evolution on the Hydrogen Adsorption Kinetics of NiFe-Based Heterogeneous Catalysts for Efficient Water Electrolysis

Transition metal layered double hydroxides, especially nickel-iron layered double hydroxide (NiFe-LDH) shows significant advancement as efficient oxygen evolution reaction (OER) electrocatalyst but also plays a momentous role as a precursor for NiFe-based hydrogen evolution reaction (HER) catalysts. Herein, a simple strategy for developing Ni-Fe-derivative electrocatalysts via phase evolution of NiFe-LDH under controllable annealing temperatures in an argon atmosphere is reported. The optimized catalyst annealed at 340 ^o C (denoted NiO/FeNi₃ ) exhibits superior HER properties with an ultralow overpotential of 16 mV@10 mA cm^-2 . Density functional theory simulation and in situ Raman analyses reveal that the excellent HER properties of the NiO/FeNi₃ can be attributed to the strong electronic interaction at the interface of the metallic FeNi₃ and semiconducting NiO, which optimizes the H₂ O and H adsorption energies for efficient HER and OER catalytic processes. This work will provide rational insights into the subsequent development of related HER electrocatalysts and other corresponding compounds via LDH-based precursors.

Interface engineering of Mo-doped Ni9S8/Ni3S2 multiphase heterostructure nanoflowers by one step synthesis for efficient overall water splitting

Accelerating charge transfer efficiency by constructing heterogeneous interfaces on metal-based substrates is an effective way to improve the electrocatalytic performance of materials. However, minimizing the substrate-catalyst interfacial resistance to maximize catalytic activity remains a challenge. This study reports a simple interface engineering strategy for constructing Mo-Ni₉S₈/Ni₃S₂ heterostructured nanoflowers. Experimental and theoretical investigations reveal that the primary role assumed by Ni₃S₂ in Mo-Ni₉S₈/Ni₃S₂ heterostructure is to replace nickel foam (NF) substrate for electron conduction, and Ni₃S₂ has a lower potential energy barrier (0.76 to 1.11 eV) than NF (1.87 eV), resulting in a more effortless electron transfer. The interface between Ni₃S₂ and Mo-Ni₉S₈ effectively regulates electron redistribution, and when the electrons from Ni₃S₂ are transferred to Mo-Ni₉S₈, the potential energy barriers at the heterogeneous interface are 1.06 eV, lower than that between NF and Ni₃S₂ (1.53 eV). Mo-Ni₉S₈/Ni₃S₂-0.1 exhibited excellent oxygen evolution reaction (OER)/hydrogen evolution reaction (HER) bifunctional catalytic activity in 1 M KOH, with overpotentials of only 223 mV@100 mA cm^-2 for OER and 116 mV@10 mA cm^-2 for HER. Moreover, when combined with an alkaline electrolytic cell, it required only an ultra-low cell voltage of 1.51 V to drive a current density of 10 mA cm^-2. This work provides new inspirations for rationally designing interface engineering for advanced catalytic materials.

Tuning active sites for highly efficient bifunctional oxygen electrocatalysts of rechargeable zinc-air battery

High activity, excellent durability, and low-cost oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) bifunctional catalysts are highly required for rechargeable zinc (Zn)-air batteries. Herein, we designed an electrocatalyst by integrating the ORR active species of ferroferric oxide (Fe₃O₄) and the OER active species of cobaltous oxide (CoO) into the carbon nanoflower. By well regulating and controlling the synthesis parameters, Fe₃O₄ and CoO nanoparticles were uniformly inserted into the porous carbon nanoflower. This electrocatalyst can reduce the potential gap between the ORR and OER to 0.79 V. The Zn-air battery assembled with it exhibited an open-circuit voltage of 1.457 V, a stable discharge of 98 h, a high specific capacity of 740 mA h g^-1, a large power density of 137 mW cm^-2, as well as good charge/discharge cycling performance, exceeding the performance of platinum/carbon (Pt/C). This work provides references for exploring highly efficient non-noble metal oxygen electrocatalysts by tuning ORR/OER active sites.

Controlled synthesis of Crx-FeCo2P nanoarrays on nickel foam for overall urea splitting

Urea splitting is a highly promising technology for hydrogen production to cope with the fossil energy crisis, which requires the development of catalysts with high electrocatalytic activity. In this article, Cr_x-FeCo₂P/NF catalysts were synthesized by hydrothermal and low-temperature phosphorylation and used in the overall urea splitting process. Cr_0.15-FeCo₂P/NF and Cr_0.1-FeCo₂P/NF exhibited excellent urea oxidation reaction (UOR) activity (potential of 1.355 V at 100 mA cm^-2) and hydrogen evolution reaction (HER) activity (overpotential of 173 mV at 10 mA cm^-2) in 0.5 M urea solution containing 1 M KOH. In the assembled Cr_0.15-FeCo₂P/NF//Cr_0.1-FeCo₂P/NF electrolytic cell, only a small voltage of 1.50 V is needed to reach 10 mA cm^-2. Density functional theory (DFT) calculation results demonstrate that an appropriate amount of Cr doping accelerates the kinetic performance of hydrogen production as well as improving the metallic properties of the electrode.

Electronic Structure Modulation Induced by Cobalt-doping and Lattice-Contracting on Armor-Like Ruthenium Oxide Drives pH-Universal Oxygen Evolution

Exquisite design of RuO₂ -based catalysts to simultaneously improve activity and stability under harsh conditions and reduce the Ru dosage is crucial for advancing energy conversion involving oxygen evolution reaction (OER). Herein, a distinctive cobalt-doped RuO_x framework is constructed on Co₃ O₄ nanocones (Co₃ O₄ @CoRuO_x ) as a promising strategy to realize above urgent desires. Extensive experimental characterization and theoretical analysis demonstrate that cobalt doped in RuO_x lattice brings the oxygen vacancies and lattice contraction, which jointly redistribute the electron configuration of RuO_x . The optimized d-band center balances the adsorption energies of oxygenated intermediates, lowing the thermodynamical barrier of the rate-determining step; and meanwhile, the over-oxidation and dissolution of Ru species are restrained because of the p-band down-shifting of the lattice oxygen. Co₃ O₄ @CoRuO_x with 3.7 wt.% Ru delivers the extremely low OER overpotentials at 10 mA cm^-2 in alkaline (167 mV), neutral (229 mV), and acidic electrolytes (161 mV), and super operating stability over dozens of hours. The unprecedented activity ranks first in all pH-universal OER catalysts reported so far. These findings provide a route to produce robust low-loading Ru catalysts and an engineering approach for regulating the central active metal through synergy of co-existing defects to improve the catalytic performance and stability.

Perovskite-Based Electrocatalysts for Cost-Effective Ultrahigh-Current-Density Water Splitting in Anion Exchange Membrane Electrolyzer Cell

Development of cost-effective water splitting technology that allows low-overpotential operation at high current density with non-precious catalysts is the key for large-scale hydrogen production. Herein, it is demonstrated that the versatile perovskite-based oxides, usually applied for operating at low current density and room temperature in alkaline solution, can be developed into low-cost, highly active and durable electrocatalysts for operating at high current densities in a zero-gap anion exchange membrane electrolyzer cell (AEMEC). The composite perovskite with mixed phases of Ruddlesden-Popper and single perovskite is applied as the anode in AEMEC and exhibits highly promising performance with an overall water-splitting current density of 2.01 A cm^-2 at a cell voltage of only 2.00 V at 60 °C with stable performance. The elevated temperature to promote anion diffusion in membrane boosts oxygen evolution kinetics by enhancing lattice-oxygen participation. The bifunctionality of perovskites further promises the more cost-effective symmetrical AEMEC configuration, and a primary cell with the composite perovskite as both electrodes delivers 3.00 A cm^-2 at a cell voltage of only 2.42 V. This work greatly expands the use of perovskites as robust electrocatalysts for industrial water splitting at high current density with great practical application merit.

Precise regulation of defect concentration in MOF and its influence on photocatalytic overall water splitting

In this work, the defective Cu-BDC with different defect concentration and Cu¹⁺/Cu²⁺ coordinatively unsaturated sites (CUS) content were designed and synthesized by introducing defective linkers with different pK_a values. The low-concentration defects in Metal-organic frameworks (MOFs) structure act as the active sites to enhance their photocatalytic activity. In contrast, the high concentration defects serve as the recombination centers of photogenerated electrons and holes to decrease the transfer efficiency of charge carriers. Cu-BDC-FBA shows an excellent bifunctional photocatalytic performance for overall water splitting due to the suitable defect concentration, which gives an oxygen production rate of 3114 μmol g^-1 h^-1 and hydrogen production rate of 16 829 μmol g^-1 h^-1, respectively. It is expected that this study can deepen the understanding of the relationship between defects and photocatalytic activity, and provide a new idea for the design and synthesis of defective MOFs photocatalysts with excellent performance.

Structural and Electronic Modulation of Iron-Based Bimetallic Metal-Organic Framework Bifunctional Electrocatalysts for Efficient Overall Water Splitting in Alkaline and Seawater Environment

Metal-organic frameworks (MOFs) are considered potential electrocatalysts for efficient water splitting. However, the structure-activity relationship of most MOFs is not systematically analyzed for electrocatalysis for anodes and cathodes. In this paper, we provide a strategy to modulate the electronic microstructure of iron-based bimetallic MOFs (MFe-BDC (M: Mg, Zn, Cd)) grown on the nickel foam (NF) as bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The optimal bimetallic CdFe-BDC via modulating appropriate metal cations of IIA and IIB possesses excellent OER and HER performance with the lowest overpotentials of 290 mV at 100 mA cm^-2 and 148 mV at 10 mA cm^-2, respectively. The overall water splitting performance of the as-prepared CdFe-BDC requires 1.68 V to achieve a current density of 10 mA cm^-2 in the real seawater media, and it exhibits the competitive H₂ and O₂ production rates of 6.4 and 3.1 μL s^-1, respectively, in ambient alkaline conditions, suggesting its potential practical applications. Density functional theory (DFT) calculations demonstrate the relationship between microstructure and electrocatalytic performance of bimetallic MFe-BDC. This work emphasizes the significance of tailoring the electronic microstructure of bimetallic MOFs for efficient overall water splitting in alkaline and seawater environment.

Single-atom palladium anchored N-doped carbon towards oxygen electrocatalysis for rechargeable Zn-air batteries

Herein, an atomically dispersed palladium catalyst on a hierarchical porous structure of N-doped carbon (Pd₁/N-C) is prepared using a facile freeze-drying-assisted strategy. Freeze-drying methods not only suppress the aggregation of Pd atoms but also successfully produce abundant nanopores. HAADF-STEM confirms that Pd single atoms are uniformly anchored on the N-C surface. The Pd₁/N-C electrocatalyst enhances the ORR and OER activity and durability compared to N-C and Pd-NPs/N-C. Rechargeable Zn-air batteries (ZABs) based on novel Pd₁/N-C exhibit a peak power density of 113.7 mW cm^-2 and maintain a voltage efficiency of 64.0% after 495 cycles at a discharge current density of 5 mA cm^-2. Besides, two ZABs in series can supply an LED light for at least 170 h.

Co2P/CoP quantum dots surface heterojunction derived from amorphous Co3O4 quantum dots for efficient photocatalytic H2 production

Amorphous/crystalline heterostructures show excellent potential in the hydrogen evolution reaction (HER) as they can significantly facilitate surface adsorption and redox reactions. Herein, a unique amorphous Co₂P/crystalline CoP quantum dots (Co₂P/CoP QDs) Type-II surface heterojunction was derived from amorphous Co₃O₄ QDs via phosphorization. The intimate contact between Co₂P QDs and CoP QDs was conducive to charge transfer, thereby promoting surface reaction kinetics. The unique structure and properties were beneficial to providing more active sites and controlling the electronic structures thus making amorphous/crystalline composites show superior photocatalytic hydrogen (H₂) production performance. Additionally, the amorphous Co₂P QDs had a plethora of unsaturated bonds and abundant defects; the disordered structure led to increased active sites that promoted surface reaction kinetics. Due to the synergistic effect of the quantum confinement of QDs and the surface heterojunction, the charge transfer efficiency of Co₂P/CoP QDs was extremely high, and high H₂ evolution activity and photostability were achieved. The maximum H₂ generation rate over the Co₂P/CoP QDs composite reached 11.88 mmol h^-1 g^-1 with an apparent quantum efficiency (AQE) of 3.88 % at 420 nm, which is roughly 20-times that of the pure Co₃O₄ QDs. In addition, high photostability was realized; even the photocatalyst that stood for a week reached initial photoactivity. This work offers a novel idea for reasonably establishing amorphous/crystalline photocatalysts to achieve efficient H₂ evolution.

N-doped carbon anchored CoS2/MoS2 nanosheets as efficient electrocatalysts for overall water splitting

The oriented two-dimensional porous nitrogen-doped carbon embedded with CoS₂ and MoS₂ nanosheets is a highly efficient bifunctional electrocatalyst. The hierarchical structure ensures fast mass transfer capacity in improving the electrocatalytic activity. And the greatly increased specific surface area is beneficial to expose more electrocatalytically active atoms. For oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) tests in 1 mol/L KOH solution, only 194 and 140 mV overpotential are required to achieve a current density of 10 mA/cm², respectively. Our research provides an effective strategy for synergizing the individual components in nanostructures for a wide range of electrocatalytic reactions.

Ruthenium/Ruthenium oxide hybrid nanoparticles anchored on hollow spherical Copper-Cobalt Nitride/Nitrogen doped carbon nanostructures to promote alkaline water splitting: Boosting catalytic performance via synergy between morphology engineering, electron transfer tuning and electronic behavior modulation

Exploring bi-functional electrocatalysts with excellent activity, good durability, and cost-effectiveness for electrochemical hydrogen and oxygen evolution reactions (HER and OER) in the same electrolyte is a critical step towards a sustainable hydrogen economy. Three main features such as high density of active sites, improved charge transfer, and optimized electronic configuration have positive effects on the electrocatalyst activity. In this context, understanding structure-composition-property relationships and catalyst activity is very important and highly desirable. Herein, for the first time, we present the design and fabrication of novel MOF-derived ultra-small Ru/RuO₂ nanoparticles doped in copper/cobalt nitride (CuCoN) encapsulated in nitrogen-doped nanoporous carbon framework (NC) (Ru/RuO₂/CuCoN@NC). For the synthesize of this nanocomposite, firstly bimetallic Cu-Co/MOF hollow nanospheres are prepared via a facile emulsion-based interfacial reaction method and used as the template for Ru ion doping (Ru-doped Cu-Co/MOF). Then, Ru-doped Cu-Co/MOF precursor during the carbonization/nitridation/cooling process converted to the Ru/RuO₂/CuCoN@NC nanocomposite. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, Ru/RuO₂/CuCoN@NC hollow nanosphere electrocatalyst demonstrates striking catalytic performances under alkaline conditions with a current density of 10 mA cm^-2at low overpotentials of 41 mV for HER and 231 mV for OER, respectively. Moreover, as a bifunctional electrocatalyst for overall water splitting, a two-electrode device needs a voltage of 1.51 V to reach a current density of 10 mA cm^-2. Comprehensive electrochemical studies show that the excellent electrocatalytic performance of the Ru/RuO₂/CuCoN@NC hollow nanosphere could be attributed to the improved physical and chemical properties such as desirable compositional, catalysts uniform dispersion, structural advantages of more exposed active sites, optimized electronic structure, high electrical conductivity, and interfacial synergy effect. This work paves a novel avenue for constructing robust bifunctional electrocatalyst for overall water splitting.

Iron Catalyzed Cascade Construction of Molybdenum Carbide Heterointerfaces for Understanding Hydrogen Evolution

The intercrystalline interfaces have been proven vital in heterostructure catalysts. However, it is still challenging to generate specified heterointerfaces and to make clear the mechanism of a reaction on the interface. Herein, this work proposes a strategy of Fe-catalyzed cascade formation of heterointerfaces for comprehending the hydrogen evolution reaction (HER). In the pure solid-phase reaction system, Fe catalyzes the in situ conversion of MoO₂ to MoC and then Mo₂ C, and the consecutive formation leaves lavish intercrystalline interfaces of MoO₂ -MoC (in Fe-MoO₂ /MoC@NC) or MoC-Mo₂ C (in Fe-MoC/β-Mo₂ C@NC), which contribute to HER activity. The improved HER activity on the interface leads to further checking of the mechanism with density functional theory calculation. The computation results reveal that the electroreduction (Volmer step) produced H* prefers to be adsorbed on Mo₂ C; then two pathways are proposed for the HER on the interface of MoC-Mo₂ C, including the single-molecular adsorption pathway (Rideal mechanism) and the bimolecular adsorption pathway (Langmuir-Hinshelwood mechanism). The calculation results further show that the former is favorable, and the reaction on the MoC-Mo₂ C heterointerface significantly lowers the energy barriers of the rate-determining steps.

Application of electrodeposited Cu-metal nanoflake structures as 3D current collector in lithium-metal batteries

Since uncontrolled lithium (Li) dendrite growth and dendrite-induced dead Li severely limit the development of Li metal batteries, 3D Cu current collectors can effectively alleviate these problems during Li plating/stripping. Herein, one-step galvanostatic electrodeposition method is employed to fabricate a new current collector on Cu foam decorated with large-scale and uniform 3D porous Cu-based nanoflake (NF) structures (abbreviated as 3D Cu NF@Cu foam). This 3D structure with large internal surface areas not only generates lithophilic surface copper oxides and hydroxides as charge centers and nucleation sites for Li insertion/extraction, but also endows abundant space with interlinked NFs for buffering the cell volume expansion and increasing battery performance. As a result, Li-deposited 3D Cu NF@Cu foam current collector can realize stable cycling over 455 cycles with an average Coulombic efficiency of 98.8% at a current density of 1.0 mA cm^-2, as well as a prolonged lifespan of >380 cycles in symmetrical cell without short-circuit, which are superior to those of blank Cu foam current collector. This work realizes Li metal anode stabilization by constructing 3D porous Cu NFs current collectors, which can advance the development of Li metal anode for battery industries.