Ion Migration in Organic-Inorganic Hybrid Perovskite Solar Cells: Current Understanding and Perspectives

Kornblum Oxidation Reaction-Induced Collective Transformation of Lead Polyhalides for Stable Perovskite Photovoltaics

The iodide vacancy defects generated during the perovskite crystallization process are a common issue that limits the efficiency and stability of perovskite solar cells (PSCs). Although excessive ionic iodides have been used to compensate for these vacancies, they are not effective in reducing defects through modulating the perovskite crystallization. Moreover, these iodide ions present in the perovskite films can act as interstitial defects, which are detrimental to the stability of the perovskite. Here, an effective approach to suppress the formation of vacancy defects by manipulating the coordination chemistry of lead polyhalides during perovskite crystallization is demonstrated. To achieve this suppression, an α-iodo ketone is introduced to undergo a process of Kornblum oxidation reaction that releases halide ions. This process induces a rapid collective transformation of lead polyhalides during the nucleation process and significantly reduces iodide vacancy defects. As a result, the ion mobility is decreased by one order of magnitude in perovskite film and the PSC achieves significantly improved thermal stability, maintaining 82% of its initial power conversion efficiency at 85 °C for 2800 h. These findings highlight the potential of halide ions released by the Kornblum oxidation reaction, which can be widely used for achieving high-performance perovskite optoelectronics.

Complex Metal Oxides as Emerging Inorganic Hole-Transporting Materials for Perovskite Solar Cells

Perovskite solar cells (PSCs) have achieved revolutionary progress during the past decades with a rapidly boosting rate in power conversion efficiencies from 3.8% to 26.1%. However, high-efficiency PSCs with organic hole-transporting materials (HTMs) suffer from inferior long-term stability and high costs. The replacement of organic HTMs with inorganic counterparts such as metal oxides can solve the above-mentioned problems to realize highly robust and cost-effective PSCs. Nevertheless, the widely used simple metal oxide-based HTMs are limited by the low conductivity and poor light transmittance due to the fixed atomic environment. As an emerging family of inorganic HTMs, complex metal oxides with superior structural/compositional flexibility have attracted rapidly increasing interest recently, showing superior carrier conductivity/mobility and superb light transmittance. Herein, the recent advancements in the design and development of complex metal oxide-based HTMs for high-performance PSCs are summarized by emphasizing the superiority of complex metal oxides as HTMs over simple metal oxide-based counterparts. Consequently, several distinct strategies for the design of complex metal oxide-based HTMs are proposed. Last, the future directions and remaining challenges of inorganic complex metal oxide-based HTMs for PSCs are also presented. This review aims to provide valuable guidelines for the further advancements of robust, high-efficiency, and low-cost PSCs.

Unified Crystal Phase Control with MACl for Inducing Single-Crystal-Like Perovskite Thin Films in High-Pressure Fusion Toward High Efficiency Perovskite Solar Cell Modules

Perovskite solar cells, recognized for their high photovoltaic conversion efficiency (PCE), cost-effectiveness, and simple fabrication, face challenges in PCE improvement due to structural defects in polycrystalline films. This study introduces a novel fabrication method for perovskite films using methylammonium chloride (MACl) to align grain orientation uniformly, followed by a high-pressure process to merge these grains into a texture resembling single-crystal perovskite. Employing advanced visual fluorescence microscopy, charge dynamics in these films are analyzed, uncovering the significant impact of grain boundaries on photo-generated charge transport within perovskite crystals. A key discovery is that optimal charge transport efficiency and speed occur in grain centers when the grain size exceeds 10 µm, challenging the traditional view that efficiency peaks when grain size surpasses film thickness to form a monolayer. Additionally, the presence of large-sized grains enhances ion activation energy, reducing ion migration under light and improving resistance to photo-induced degradation. In application, a perovskite solar cell module with large grains achieve a PCE of 22.45%, maintaining performance with no significant degradation under continuous white LED light at 100 mA cm-2 for over 1000 h. This study offers a new approach to perovskite film fabrication and insights into optimizing perovskite solar cell modules.

Modulating secondary growth of perovskite grains through residual solvent evaporation

Over the past decade, perovskite solar cells (PSCs) have attracted enormous attention due to their high performance. One key to fabricating high-quality perovskite films lies in controlling the volatilization rate of residual solvents during the annealing process. This study systematically investigates how different protective substrates affect the volatilization rate of residual solvent in perovskite films. By adjusting the direction and rate of evaporation, the supersaturation time of the solution was precisely controlled, leading to effective recrystallization of the grains. Concurrently, the annealing time was optimized to enhance film quality further. This optimization aimed to increase crystallinity, reduce defects, and thereby minimize non-radiative recombination centers. Implementing these methodologies, particularly the use of filter paper as a protective substrate during a 2-minute annealing process, significantly improved the fill factor (FF) and open-circuit voltage (VOC) of the PSCs. This led to a remarkable 5.26% improvement in power conversion efficiency (PCE) compared to control devices. The strategies employed in this work demonstrate significant potential in improving PSC film quality. This approach not only advances our understanding of film formation dynamics but also provides a practical guideline for future PSC fabrication.

Stability Strategies and Applications of Iodide Perovskites

Iodide perovskites have demonstrated their unprecedented high efficiency and commercialization potential, and their superior optoelectronic properties, such as high absorption coefficient, high carrier mobility, and narrow direct bandgap, have attracted much attention, especially in solar cells, photodetectors, and light-emitting diodes (LEDs). However, whether it is organic iodide perovskite, organic-inorganic hybrid iodide perovskite or all-inorganic iodide perovskite the stability of these iodide perovskites is still poor and the contamination is high. In recent years, scholars have studied more iodide perovskites to improve their stability as well as optoelectronic properties from various angles. This paper systematically reviews the strategies (component engineering, additive engineering, dimensionality reduction engineering, and phase mixing engineering) used to improve the stability of iodide perovskites and their applications in recent years.

Boosting the Performance of Photomultiplication-Type Organic Photodiodes by Embedding CsPbBr3 Perovskite Nanocrystals

In this study, it is demonstrated that CsPbBr3 perovskite nanocrystals (NCs) can enhance the overall performances of photomultiplication-type organic photodiodes (PM-OPDs). The proposed approach enables the ionic-polarizable CsPbBr3 NCs to be evenly distributed throughout the depletion region of Schottky junction interface, allowing the entire trapped electrons within the depletion region to be stabilized, in contrast to previously reported interface-limited strategies. The optimized CsPbBr3 -NC-embedded poly(3-hexylthiophene-diyl)-based PM-OPDs exhibit exceptionally high external quantum efficiency, specific detectivity, and gain-bandwidth product of 2,840,000%, 3.97 × 1015 Jones, and 2.14 × 107  Hz, respectively. 2D grazing-incidence X-ray diffraction analyses and drift-diffusion simulations combined with temperature-dependent J-V characteristic analyses are conducted to investigate the physics behind the success of CsPbBr3 -NC-embedded PM-OPDs. The results show that the electrostatic interactions generated by the ionic polarization of NCs effectively stabilize the trapped electrons throughout the entire volume of the photoactive layer, thereby successfully increasing the effective energy depth of the trap states and allowing efficient PM mechanisms. This study demonstrates how a hybrid-photoactive-layer approach can further enhance PM-OPD when the functionality of inorganic inclusions meets the requirements of the target device.

Self-Healing Behavior of the Metal Halide Perovskites and Photovoltaics

Perovskite solar cells have achieved rapid progress in the new-generation photovoltaic field, but the commercialization lags behind owing to the device stability issue under operational conditions. Ultimately, the instability issue is attributed to the soft lattice of ionic perovskite crystal. In brief, metal halide perovskite materials are susceptible to structural instability processes, including phase segregation, component loss, lattice distortion, and fatigue failure under harsh external stimuli such as high humidity, strong irradiation, wide thermal cycles, and large stress. Developing self-healing perovskites to further improve the unsatisfactory operational stability of their photoelectric devices under harsh stimuli has become a cutting-edge hotspot in this field. This self-healing behavior needs to be studied more comprehensively. Therefore, the self-healing behavior of the metal halide perovskites and photovoltaics is classified and summarized in this review. By discussing recent advances, underlying mechanisms, strategies, and existing challenges, this review provides perspectives on self-healing of perovskite solar cells in the future.

Long-chain organic molecules enable mixed dimensional perovskite photovoltaics: a brief view

The remarkable optoelectronic properties of organometal halide perovskite solar cells have captivated significant attention in the energy sector. Nevertheless, the instability of 3D perovskites, despite their extensive study and attainment of high-power conversion efficiency, remains a substantial obstacle in advancing PSCs for practical applications and eventual commercialization. To tackle this issue, researchers have devised mixed-dimensional perovskite structures combining 1D and 3D components. This innovative approach entails incorporating stable 1D perovskites into 3D perovskite matrices, yielding a significant improvement in long-term stability against various challenges, including moisture, continuous illumination, and thermal stress. Notably, the incorporation of 1D perovskite yields a multitude of advantages. Firstly, it efficiently passivates defects, thereby improving the overall device quality. Secondly, it retards ion migration, a pivotal factor in degradation, thus further bolstering stability. Lastly, the inclusion of 1D perovskite facilitates charge transport, ultimately resulting in an elevated device efficiency. In this succinct review, we thoroughly encapsulate the recent progress in PSCs utilizing 1D/3D mixed-dimensional architectures. These advancements encompass both stacked bilayer configurations of 1D/3D structures and mixed monolayer structures of 1D/3D. Additionally, we tackle critical challenges that must be surmounted and offer insights into the prospects for further advancements in this domain.

Inhibition of Ion Migration for Highly Efficient and Stable Perovskite Solar Cells

In recent years, organic-inorganic halide perovskites are now emerging as the most attractive alternatives for next-generation photovoltaic devices, due to their excellent optoelectronic characteristics and low manufacturing cost. However, the resultant perovskite solar cells (PVSCs) are intrinsically unstable owing to ion migration, which severely impedes performance enhancement, even with device encapsulation. There is no doubt that the investigation of ion migration and the summarization of recent advances in inhibition strategies are necessary to develop "state-of-the-art" PVSCs with high intrinsic stability for accelerated commercialization. This review systematically elaborates on the generation and fundamental mechanisms of ion migration in PVSCs, the impact of ion migration on hysteresis, phase segregation, and operational stability, and the characterizations for ion migration in PVSCs. Then, many related works on the strategies for inhibiting ion migration toward highly efficient and stable PVSCs are summarized. Finally, the perspectives on the current obstacles and prospective strategies for inhibition of ion migration in PVSCs to boost operational stability and meet all of the requirements for commercialization success are summarized.

Ferrocene Derivatives for Improving the Efficiency and Stability of MA-Free Perovskite Solar Cells from the Perspective of Inhibiting Ion Migration and Releasing Film Stress

Further improvement of the performance and stability of inverted perovskite solar cells (PSCs) is necessary for commercialization. Here, ferrocene derivative dibenzoylferrocene (DBzFe) is used as an additive to enhance the performance and stability of MA- and Br- free PSCs. The results show that the introduction of DBzFe not only passivates the defects in the film but also inhibits the ion migration in the film. The final device achieves a power conversion efficiency (PCE) of 23.53%, which is one of the highest efficiencies currently based on self-assembled monolayers (SAMs). Moreover, it maintains more than 96.4% of the original efficiency when running continuously for 400 h at the maximum power point.

Role of Dipolar Organic Cations on Light-triggered Charge Transfer at TiO2 /CH3 NH3 PbI3 Interfaces

The TiO2 /MAPbI3 (MA=CH3 NH3 ) interfaces have manifested correlation with current-voltage hysteresis in perovskite solar cells (PSCs) under light illumination conditions, but the relations between the photo-induced charge transfer and the collective polarization response of the dipolar MA cations are largely unexplored. In this work, we adopt density functional theory (DFT) and time-dependent DFT approach to study the light-triggered charge transfer across the TiO2 /MAPbI3 interfaces with MAI- and PbI-exposed terminations. It is found that regardless of the surface exposure of the MAPbI3 , the photo-induced charge transfer varies when going from the ground-state geometries to the excited-state configurations. Besides, thanks to the electrostatic interactions between the ends of MA cations and the photogenerated electrons, the photo-induced charge transfer across the interfaces is enhanced (weakened) by the negatively (positively) charged CH3 (NH3 ) moieties of the MA species. Resultantly, the positively charged iodine vacancies at the TiO2 /MAPbI3 interfaces tend to inhibit the charge transfer induced by light. Combining with the energy level alignment which is significantly modulated by the orientation of the MA species at the interfaces, the dipolar MA cations might be a double-edge sword for the hysteresis in PSCs with the TiO2 /MAPbI3 interfaces.

Mitigating Ion Migration with an Ultrathin Self-Assembled Ionic Insulating Layer Affords Efficient and Stable Wide-Bandgap Inverted Perovskite Solar Cells

Wide-bandgap perovskite solar cells (PSCs) are attracting increasing attention because they play an irreplaceable role in tandem solar cells. Nevertheless, wide-bandgap PSCs suffer large open-circuit voltage (VOC ) loss and instability due to photoinduced halide segregation, significantly limiting their application. Herein, a bile salt (sodium glycochenodeoxycholate, GCDC, a natural product), is used to construct an ultrathin self-assembled ionic insulating layer firmly coating the perovskite film, which suppresses halide phase separation, reduces VOC loss, and improves device stability. As a result, 1.68 eV wide-bandgap devices with an inverted structure deliver a VOC of 1.20 V with an efficiency of 20.38%. The unencapsulated GCDC-treated devices are considerably more stable than the control devices, retaining 92% of their initial efficiency after 1392 h storage under ambient conditions and retaining 93% after heating at 65 °C for 1128 h in an N2 atmosphere. This strategy of mitigating ion migration via anchoring a nonconductive layer provides a simple approach to achieving efficient and stable wide-bandgap PSCs.

Degradation and Self-Healing of FAPbBr3 Perovskite under Soft-X-Ray Irradiation

The extensive use of perovskites as light absorbers calls for a deeper understanding of the interaction of these materials with light. Here, the evolution of the chemical and optoelectronic properties of formamidinium lead tri-bromide (FAPbBr3 ) films is tracked under the soft X-ray beam of a high-brilliance synchrotron source by photoemission spectroscopy and micro-photoluminescence. Two contrasting processes are at play during the irradiation. The degradation of the material manifests with the formation of Pb0 metallic clusters, loss of gaseous Br2 , decrease and shift of the photoluminescence emission. The recovery of the photoluminescence signal for prolonged beam exposure times is ascribed to self-healing of FAPbBr3 , thanks to the re-oxidation of Pb0 and migration of FA+ and Br- ions. This scenario is validated on FAPbBr3 films treated by Ar+ ion sputtering. The degradation/self-healing effect, which is previously reported for irradiation up to the ultraviolet regime, has the potential of extending the lifetime of X-ray detectors based on perovskites.

X-Site Substituted 2D Cs2 Pb(SCN)2 Br2 Perovskites for X-Ray Detection

2D Ruddlesden-Popper (RP) perovskites have been intensively investigated due to their superior stability and outstanding optoelectrical properties. However, investigations on 2D RP perovskites are mainly focused on A-site substituted perovskites and few reports are on X-site substituted perovskites especially in X-ray detection field. Here, X-site substituted 2D RP perovskite Cs2 Pb(SCN)2 Br2 polycrystalline wafers are prepared and systematically studied for X-ray detection. The obtained wafers show a large resistivity of 2.0 × 1010 Ω cm, a high ion activation energy of 0.75 eV, a small current drift of 2.39 × 10-6 nA cm-1 s-1 V-1 , and charge carrier mobility-lifetime product under X-ray as high as 1.29 × 10-4 cm2 V-1 . These merits enable Cs2 Pb(SCN)2 Br2 wafer detectors with a sensitivity of 216.3 µC Gyair -1 cm-2 , a limit of detection of 42.4 nGyair s-1 , and good imaging ability with high spatial resolution of 1.08 lp mm-1 . In addition, Cs2 Pb(SCN)2 Br2 wafer detectors demonstrate excellent operational stability under high working field up to 2100 V cm-1 after continuous X-ray irradiation with a total dose of 45.2 Gyair . The promising features such as short octahedral spacing and weak ion migration will open up a new perspective and opportunity for SCN-based 2D perovskites in X-ray detection.

Synergy of 3D and 2D Perovskites for Durable, Efficient Solar Cells and Beyond

Three-dimensional (3D) organic-inorganic lead halide perovskites have emerged in the past few years as a promising material for low-cost, high-efficiency optoelectronic devices. Spurred by this recent interest, several subclasses of halide perovskites such as two-dimensional (2D) halide perovskites have begun to play a significant role in advancing the fundamental understanding of the structural, chemical, and physical properties of halide perovskites, which are technologically relevant. While the chemistry of these 2D materials is similar to that of the 3D halide perovskites, their layered structure with a hybrid organic-inorganic interface induces new emergent properties that can significantly or sometimes subtly be important. Synergistic properties can be realized in systems that combine different materials exhibiting different dimensionalities by exploiting their intrinsic compatibility. In many cases, the weaknesses of each material can be alleviated in heteroarchitectures. For example, 3D-2D halide perovskites can demonstrate novel behavior that neither material would be capable of separately. This review describes how the structural differences between 3D halide perovskites and 2D halide perovskites give rise to their disparate materials properties, discusses strategies for realizing mixed-dimensional systems of various architectures through solution-processing techniques, and presents a comprehensive outlook for the use of 3D-2D systems in solar cells. Finally, we investigate applications of 3D-2D systems beyond photovoltaics and offer our perspective on mixed-dimensional perovskite systems as semiconductor materials with unrivaled tunability, efficiency, and technologically relevant durability.

Feature Selection in Machine Learning for Perovskite Materials Design and Discovery

Perovskite materials have been one of the most important research objects in materials science due to their excellent photoelectric properties as well as correspondingly complex structures. Machine learning (ML) methods have been playing an important role in the design and discovery of perovskite materials, while feature selection as a dimensionality reduction method has occupied a crucial position in the ML workflow. In this review, we introduced the recent advances in the applications of feature selection in perovskite materials. First, the development tendency of publications about ML in perovskite materials was analyzed, and the ML workflow for materials was summarized. Then the commonly used feature selection methods were briefly introduced, and the applications of feature selection in inorganic perovskites, hybrid organic-inorganic perovskites (HOIPs), and double perovskites (DPs) were reviewed. Finally, we put forward some directions for the future development of feature selection in machine learning for perovskite material design.

Functional Ionic Liquid Polymer Stabilizer for High-Performance Perovskite Photovoltaics

The stability-related issues arising from the perovskite precursor inks, films, device structures and interdependence remain severely under-explored to date. Herein, we designed an ionic-liquid polymer (poly[Se-MI][BF₄ ]), containing functional moieties like carbonyl (C=O), selenium (Se⁺ ), and tetrafluoroborate (BF₄ ^- ) ions, to stabilize the whole device fabrication process. The C=O and Se⁺ can coordinate with lead and iodine (I^- ) ions to stabilize lead polyhalide colloids and the compositions of the perovskite precursor inks for over two months. The Se⁺ anchored on grain boundaries and the defects passivated by BF₄ ^- efficiently suppress the dissociation and migration of I^- in perovskite films. Benefiting from the synergistic effects of poly[Se-MI][BF₄ ], high efficiencies of 25.10 % and 20.85 % were exhibited by a 0.062-cm² device and 15.39-cm² module, respectively. The devices retained over 90 % of their initial efficiency under operation for 2200 h.

Gamma-Ray Irradiation Stability of Zero-Dimensional Cs3Cu2I5 Metal Halide Scintillator Single Crystals

Zero-dimensional Cs₃Cu₂I₅ is one of the most promising metal halide scintillators due to its large Stokes shift, photoluminescence quantum yields, freedom from toxic elements, and excellent energy spectrum resolution. To unlock the full potential of Cs₃Cu₂I₅ as an effective alternative to traditional scintillators for gamma-ray detection, the irradiation stability of Cs₃Cu₂I₅ single crystals under ⁶⁰Co gamma rays with a maximum accumulated dose of 800 krad was explored. Although the luminescence mechanism remained unchanged after irradiation, the optical properties of Cs₃Cu₂I₅ single crystals demonstrated a dose-dependent change at low accumulated doses (<600 krad). However, a further increase in the accumulated dose did not lead to more severe degradation and even slight performance recovery occurred. Electron paramagnetic resonance and theoretical calculation results revealed that the irradiation-induced Cs⁺-related Frenkel defects contribute to performance degradation. These results shed light on the microscopic mechanism of gamma-ray irradiation damage of Cs₃Cu₂I₅ single crystal and provide guidance to their real application.

Synergistic Effect of Surface p-Doping and Passivation Improves the Efficiency, Stability, and Reduces Lead Leakage in All-Inorganic CsPbIBr2 -Based Perovskite Solar Cells

Wide-bandgap inorganic cesium lead halide CsPbIBr₂ is a popular optoelectronic material that researchers are interested in because of the character that balances the power conversion efficiency and stability of solar cells. It also has great potential in semitransparent solar cells, indoor photovoltaics, and as a subcell for tandem solar cells. Although CsPbIBr₂ -based devices have achieved good performance, the open-circuit voltage (V_oc ) of CsPbIBr₂ -based perovskite solar cells (PSCs) is still lower, and it is critical to further reduce large energy losses (E_loss ). Herein, a strategy is proposed for achieving surface p-type doping for CsPbIBr₂ -based perovskite for the first time, using 1,5-Diaminopentane dihydroiodide at the perovskite surface to improve hole extraction efficiency. Meanwhile, the adjusted energy levels reduce E_loss and improve V_oc of the CsPbIBr₂ PSCs. Furthermore, the Cs- and Br-vacancies at the interface are filled, reducing structural disorder and defect states and thus improving the quality of the perovskite film. As a result, the target device achieves a high efficiency of 11.02% with a V_oc of 1.33 V, which is among the best values. In addition to the improved performance, the stability of the target device under various conditions is enhanced, and the lead leakage is effectively suppressed.

Chemical approaches for electronic doping in photovoltaic materials beyond crystalline silicon

Electronic doping is applied to tailor the electrical and optoelectronic properties of semiconductors, which have been widely adopted in information and clean energy technologies, like integrated circuit fabrication and PVs. Though this concept has prevailed in conventional PVs, it has achieved limited success in the new-generation PV materials, particularly in halide perovskites, owing to their soft lattice nature and self-compensation by intrinsic defects. In this review, we summarize the evolution of the theoretical understanding and strategies of electronic doping from Si-based photovoltaics to thin-film technologies, e.g., GaAs, CdTe and Cu(In,Ga)Se₂, and also cover the emerging PVs including halide perovskites and organic solar cells. We focus on the chemical approaches to electronic doping, emphasizing various chemical interactions/bonding throughout materials synthesis/modification to device fabrication/operation. Furthermore, we propose new classifications and models of electronic doping based on the physical and chemical properties of dopants, in the context of solid-state chemistry, which inspires further development of optoelectronics based on perovskites and other hybrid materials. Finally, we outline the effects of electronic doping in semiconducting materials and highlight the challenges that need to be overcome for reliable and controllable doping.

Low-Temperature-Processed Monolayer Inverse Opal SnO2 Scaffold for Efficient Perovskite Solar Cells

Organic-inorganic halide perovskite solar cells (PSCs) have attracted tremendous attention in the photovoltaic field due to their excellent optical properties and simple fabrication process. However, the recombination of photogenerated electron-hole pairs at the interface severely affects the power conversion efficiency (PCE) of the PSCs. Herein, a monolayer of inverse opal SnO₂ (IO-SnO₂ ) is synthesized via a template-assisted method and used as a scaffold for perovskite layer (PSK). The porous IO-SnO₂ scaffold increases the contact area and shortens the transport distance between the electron transport layer (ETL) and PSK. Ultraviolet photoelectron spectroscopy and Kelvin probe force microscopy results indicate that the built-in electric field is enhanced with IO-SnO₂ scaffold, strengthening the driving force for charge separation. Femtosecond transient absorption spectroscopy measurements reveal that the IO-SnO₂ scaffold facilitates interfacial electron transfer from PSK to ETL. Based on the above superiorities, the IO-SnO₂ -based PSCs exhibit boosted PCE and device stability compared with the pristine PSCs. This work provides insights into the development of novel scaffold layers for high-performance PSCs.

Recent Criterion on Stability Enhancement of Perovskite Solar Cells

Perovskite solar cells (PSCs) have captured the attention of the global energy research community in recent years by showing an exponential augmentation in their performance and stability. The supremacy of the light-harvesting efficiency and wider band gap of perovskite sensitizers have led to these devices being compared with the most outstanding rival silicon-based solar cells. Nevertheless, there are some issues such as their poor lifetime stability, considerable J–V hysteresis, and the toxicity of the conventional constituent materials which restrict their prevalence in the marketplace. The poor stability of PSCs with regard to humidity, UV radiation, oxygen and heat especially limits their industrial application. This review focuses on the in-depth studies of different direct and indirect parameters of PSC device instability. The mechanism for device degradation for several parameters and the complementary materials showing promising results are systematically analyzed. The main objective of this work is to review the effectual strategies of enhancing the stability of PSCs. Several important factors such as material engineering, novel device structure design, hole-transporting materials (HTMs), electron-transporting materials (ETMs), electrode materials preparation, and encapsulation methods that need to be taken care of in order to improve the stability of PSCs are discussed extensively. Conclusively, this review discusses some opportunities for the commercialization of PSCs with high efficiency and stability.