Multi-Emission from Single Metal-Organic Frameworks under Single Excitation

Triple-Phosphorescent Gold Nanoclusters Enabled by Isomerization of Terminal Thiouracils in the Surface Motifs

Metal nanoclusters (NCs) hold great promise for expressing multipeak emission based on their well-defined total structure with diverse luminescent centers. Herein, we report the surface motif-dictated triple phosphorescence of Au NCs with dynamic color turning. The deprotonation-triggered isomerization of terminal thiouracils can evolve into a mutual transformation among their hierarchical motifs, thus serving a multipeak-emission expression with good tailoring. More importantly, the underlying electron transfer is thoroughly identified by excluding the radiative and nonradiative energy transfer, where electrons flow from the first phosphorescent state to the last two ones. The findings shed light on finely tailing motifs at the molecular level to motivate studies on customizable luminescence characteristics of metal NCs.

Fabrication of a Terbium-Functionalized Cadmium Organic Framework with Proper Energy Levels as a Ratiometric Probe of an Anthrax Biomarker

Anthrax bacillus is a very dangerous zoonotic pathogen that seriously endangers public health. Rapid and accurate qualitative and quantitative detection of its biomarkers, 2,6-dipicolinic acid (DPA), is crucial for the prevention and treatment of this pathogenic bacterium. In this work, a novel Cd-based MOF (TTCA-Cd) has been synthesized from a polycarboxylate ligand, [1,1':2',1″-terphenyl]-4,4',4″,5'-tetracarboxylic acid (H4TTCA), and further doped with Tb(III), forming a dual-emission lanthanide-functionalized MOF hybrid (TTCA-Cd@Tb). TTCA-Cd@Tb can be developed as a high-performance ratiometric fluorescent sensor toward DPA with a very low detection limit of 7.14 nM and high selectivity in a wide detection range of 0-200 μM, demonstrating a big advancement and providing a new option for the detection of DPA.

Carbon dots with enhanced red emission for ratiometric sensing and encryption applications

The excitation-dependent emission properties of carbon dots (Cdots) are extensively reported, but their red emission is often weak, limiting their wider application. Here we introduce ethidium bromide, as a functional precursor with red emission, to enhance the red emission for Cdots, with comparable intensity at a broad wavelength range to multi-emission Cdots (M-Cdots). We found that Cdots prepared with ethidium bromide/ethylenediamine exhibited strong blue and red emission at 440 and 615 nm, with optimal excitation at 360 and 470 nm as M-Cdots, respectively, but the Cdots from single ethidium bromide (EB-Cdots) possessed weak red emission. M-Cdots exhibited a broad absorption band at 478 nm, but a band blue-shifted to 425 nm was observed for EB-Cdots, while no absorption was observed at 478-425 nm for the Cdots prepared with citric acid and ethylenediamine. Thus, we proposed that C=O and C=N formed a π-conjugation structure as the absorption band at 478 nm for the red emission of M-Cdots, as also confirmed with the excitation at 470 nm. Moreover, the π-conjugation structure is fragile and sensitive to harsh conditions, so red emission was difficult to observe for the Cdots prepared with citric acid/ethylenediamine or single ethidium bromide. M-Cdots possess two centers for blue and red emission with different structures. The dual emission was therefore used for ratiometric sensing with dichromate (Cr2O72-) and formaldehyde (HCHO) as the targets using the intensity ratio of the emissions at 615 and 440 nm. Due to the comparable intensity at a broad wavelength range, we designed encryption codes with five excitations at 360, 400, 420, 450, and 470 nm as the inputs, and the emission colors were used for information decoding. Thus, we determined why red emission was difficult to realize for Cdots, and our results could motivate the design of red-emission Cdots for extensive applications.

A dual-responsive RhB-doped MOF probe for simultaneous recognition of Cu2+ and Fe3

Based on the dual response of RhB@UiO-67 (1:6) to Cu2+ and Fe3+, a proportional fluorescent probe with (I392/I581) as the output signal was developed to recognize Cu2+ and Fe3+. Developing highly sensitive and selective trace metal ions probes is crucial to human health and ecological sustainability. In this work, a series of ratio fluorescent probes (RhB@UiO-67) were successfully synthesized using a one-pot method to enable fluorescence sensing of Cu2+ and Fe3+ at low concentrations. The proportional fluorescent probe RhB@UiO-67 (1:6) exhibited simultaneous quenching of Cu2+ and Fe3+, which was found to be of interest. Furthermore, the limits of detection (LODs) for Cu2+ and Fe3+ were determined to be 2.76 μM and 0.76 μM, respectively, for RhB@UiO-67 (1:6). These values were significantly superior to those reported for previous sensors, indicating the probe's effectiveness in detecting Cu2+ and Fe3+ in an ethanol medium. Additionally, RhB@UiO-67 (1:6) demonstrated exceptional immunity and reproducibility towards Cu2+ and Fe3+. The observed fluorescence quenching of Cu2+ and Fe3+ was primarily attributed to the mechanisms of fluorescence resonance energy transfer (FRET), photoinduced electron transfer (PET), and competitive absorption (CA). This work establishes a valuable foundation for the future study and utilization of Cu2+ and Fe3+ sensing technologies.

Multiple-Emitting Luminescent Metal-Organic Framework as an Array-on-a-MOF for Rapid Screening and Discrimination of Nitroaromatics

Fluorescence array technologies have attracted great interest in the sensing field because of their high sensitivity, low cost, and capability of multitarget detection. However, traditional array sensing relies on multiple independent sensors and thus often requires time-consuming and laborious measurement processes. Herein, we introduce a novel fluorescence array strategy of the array-on-a-metal-organic framework (MOF), which integrates multiple array elements into a single MOF matrix to achieve facile sensing and discrimination of multiple target analytes. As a proof-of-concept system, we constructed a luminescent MOF containing three different emitting channels, including a lanthanide ion (europium/Eu3+, red emission), a fluorescent dye (7-hydroxycoumarin-4-acetic acid/HCAA, blue emission), and the MOF itself (UiO-66-type MOF, blue-violet emission). Five structurally similar nitroaromatic compounds (NACs) were chosen as the targets. All three channels of the array-on-a-MOF displayed rapid and stable fluorescence quenching responses to NACs (response equilibrium achieved within 30 s). Different responses were generated for each channel against each NAC due to the various quenching mechanisms, including photoinduced electron transfer, energy competition, and the inner filter effect. Using linear discriminant analysis, the array-on-a-MOF successfully distinguished the five NACs and their mixtures at varying concentrations and demonstrated good sensitivity to quantify individual NACs (detect limit below the advisory concentration in drinking water). Moreover, the array also showed feasibility in the sensing and discrimination of multiple NACs in real water samples. The proposed "array-on-a-MOF" strategy simplifies multitarget discrimination procedures and holds great promise for various sensing applications.

Fluorescent Eu-MOF@nanocellulose-based nanopaper for rapid and sensitive detection of uranium (Ⅵ)

Radioactive uranium leaks into natural water bodies mainly in the form of uranyl ions (UO22+), posing ecological and human health risks. Fluorescent europium-based metal-organic frameworks (Eu-MOFs) have been demonstrated to be effective fluorescent sensors for UO22+, but the large size, powder state and poor dispersity limit their further application. In this work, fluorescent Eu-MOFs were in-situ grown on TEMPO-oxidized cellulose nanofibers (TOCNFs), which is the first time that spherical Eu-MOF crystals with sizes below 10 nm were prepared. Fluorescence spectral analysis revealed a nine-fold increase in the fluorescence intensity of TOCNF@Eu-MOF compared to Eu-MOF. The nanocomposites achieved rapid and sensitive fluorescence quenching to UO22+ through the "antenna effect" and unsaturated Lewis basic sites on the ligands binding with UO22+. Moreover, TOCNF@Eu-MOF demonstrated excellent selectivity and anti-interference for UO22+ detection. For the nanopaper-based sensor made from TOCNF@Eu-MOF, the Stern-Volmer quenching constant (KSV) was calculated as 8.21 × 104 M-1, and the lowest limit of detection (LOD) was 6.6 × 10-7 M, significantly lower than the 1.32 × 10-6 M of Eu-MOFs. In addition, the nanopaper exhibited good fluorescence stability and cyclic detection performance, enabling the rapid and convenient detection of UO22+ in the aqueous phase within 30 s by simple dipping.

Dual-emissive europium doped UiO-66-based ratiometric light-up biosensor for highly sensitive detection of histidinemia biomarker

BACKGROUND

Lanthanide metal-organic frameworks (Ln-MOFs) are a kind of emerging crystalline porous materials with high fluorescence and easy-to-tunable properties, making them ideal for sensing applications. However, current Ln-MOFs based fluorescent probes are primarily single-emissive or fluorescence-quenched, which greatly limited the detection performances such as sensitivity, accuracy and repeatability, thereby hindering their applications in efficient target monitoring and related disease diagnosis. To address these issues, the reasonable design of Ln-MOFs equipped with dual fluorescence emissions and light-up mode is urgently needed for a high-performance biosensor.

RESULTS

A dual-emissive europium doped UiO-66 (Eu@UiO-66-NH2-PMA)-based ratiometric fluorescent biosensing platform was constructed for highly sensitive and selective detection of the histidinemia biomarker-histidine (His). Eu@UiO-66-NH2-PMA (pyromellitic acid abbreviated as PMA) was synthesized utilizing a post-synthetic modification method via coordination interactions between the free -COOH of UiO-66-NH2-PMA and Eu3+, which exhibited characteristic peaks of broad ligand emission and sharp Eu3+ emissions simultaneously. Considering that Cu2+ had the excellent fluorescence quenching ability toward Eu3+ and superior affinity with His, it was deliberately introduced into the Eu@UiO-66-NH2-PMA, acting as active sites for target His responsiveness. The Eu@UiO-66-NH2-PMA/Cu2+/His ternary competition system demonstrated a low detection limit of 74 nM, excellent selectivity and good anti-interference capability that allowed for sensitive analysis of His levels in milk and human serum samples.

SIGNIFICANCE

Attributing to the superior luminescent properties, good stability and self-calibration capability of Eu@UiO-66-NH2-PMA, the developed ratiometric light-up sensing platform enabled sensitive, selective and credible analysis of His in complex practical samples, which might provide an available tool for food nutrition guideline and diagnostic applications of His related diseases.

Recent Advances in Construction Strategies for Fluorescence Sensing Films

A year ago, film-based fluorescent sensors (FFSs) were recognized in the "IUPAC Top Ten Emerging Technologies in Chemistry 2022" due to their extensive application in detecting hidden explosives, illicit drugs, and volatile organic compounds. These sensors offer high sensitivity, specificity, immunity to light scattering, and noninvasiveness. The core of FFSs is the construction of high-performance fluorescent sensing films, which are dependent on the processes of "energy transfer" and "mass transfer" in the active layer and involve complex interactions between sensing molecules and analytes. This Perspective focuses on the latest strategies in constructing these films, emphasizing the design of sensing molecules with various innovative features and structures that enhance the mass transfer efficiency. Additionally, it discusses the ongoing challenges and potential advancements in the field of FFSs.

Cd-MOF and Its Ln3+-Post Modification Products: Regulation of Luminescence Properties and Improved Detection of Uric Acid, Quinine, and Quinidine

One 3D Cd-MOF, namely, {[(HDMA)2][Cd3(L)2]·5H2O·2DMF}n (LCU-124, LCU indicates Liaocheng University), was synthesized from an ether-containing ligand 1,3-bis(3,5-dicarboxylphenoxy)benzene (H4L). Its Ln3+-postmodified samples, Eu3+@LCU-124 and Tb3+@LCU-124, were obtained through cation exchange of dimethylamine cation (HDMA) with Eu3+ and Tb3+. The successful entry of rare earth into LCU-124 by cation exchange modification was verified by IR, XRD, XPS, EDS mapping, and luminescence spectra. The proportion of Eu3+/Tb3+ was adjusted during the modification process, leading to fluorescent materials with different emissions. Luminescence measurements indicated that these complexes exhibited interesting multiresponsive sensing activities toward biomarkers urine acid (UA), quinine (QN), and quinidine (QND). First, LCU-124 has a pronounced quenching effect toward UA with the detection limit of 31.01 μM. After modification, the visualization of the detection was improved significantly and the detection limit of Eu3+@LCU-124 was reduced to 0.868 μM. Second, when QN and QND were present in the suspensions of Eu3+@LCU-124 and Tb3+@LCU-124, strong blue light emission peaks occurred, while the characteristic emission of Eu3+/Tb3+ decreased, forming ratiometric fluorescent sensors with the detection limit in the range of 0.199-9.49 μM. The fluorescent probes have high selectivity, excellent sensitivity recycling, and fast response time (less than 1 min). Besides, a simple logic gate circuit and a range of luminescent mixed matrix membranes were designed to provide simple and fast detection of above biomarkers. Our work indicated that modification of Eu3+/Tb3+ could improve the detection ability significantly.

A Novel Ion Species- and Ion Concentration-Dependent Anti-Counterfeiting Based on Ratiometric Fluorescence Sensing of CDs@MOF-Nanofibrous Films

Traditional fluorescent anti-counterfeiting labels based on "on-off" fluorescence can be easily cloned. It is important to explore advanced anti-counterfeiting fluorescent labels with high-level security. Here, a pioneering ion species- and ion concentration-dependent anti-counterfeiting technique is developed. By successive loading Cu2+ -sensitive yellow emitted carbon dots (Y-CDs) and Cu2+ non-sensitive blue emitted carbon dots (B-CDs) into metal-organic frameworks (MOFs) and followed by electrospinning, the B&Y-CDs@MOF-nanofibrous films are prepared. The results show that the use of MOF not only avoids the fluorescence quenching of CDs but also improves the fluorescence stability. The fluorescence Cu2+ -sensitivity of the CDs@MOF-nanofibrous films can be regulated by polymer coating or lamination. The fluorescent label consisting of different Cu2+ -sensitivity films will show Cu2+ concentration-dependent decryption information. Only at a specific ion species and concentration (Cu2+ solution of 40-90 µm), the true information can be read out. Less or more concentration (<40 or >90 µm) will lead to false information. The identification of the real information depends on both the species and the concentration. After Cu2+ treatment, the fluorescence of the label can be recovered by ethylenediaminetetraacetic acid disodium (EDTA-2Na) for further recycling. This work will open up a new door for designing high-level fluorescent anti-counterfeiting labels.

Pyrazine Functionalization in Eu-MOF for Exclusive Ratiometric Luminescence Sensing of PO43

Single-emission luminescence sensors are less than satisfactory for complex systems due to their susceptibility to environmental disturbances. Lanthanum-based metal-organic frameworks (Ln-MOFs) with highly stable ratiometric dual-emission are regarded as promising luminescence probes owing to their fascinating ligand-to-metal energy transfer behaviors (also known as the antenna effect). Herein, we report the synthesis of a pair of isostructural europium-based MOFs (termed JNU-219 and JNU-220) by utilizing two X-shaped tetracarboxylate linkers, 4,4',4″,4‴-benzene-2,3,5,6-tetrayl-tetrabenzoate (BTEB) and 4,4',4″,4‴-pyrazine-2,3,5,6-tetrayl-tetrabenzoate (BTTB). Both JNU-219 and JNU-220 present the characteristic red luminescence of Eu3+, yet the pyrazine functionalization of the BTTB linker renders JNU-220 with significantly increased luminescence emission, almost 30 times that of JNU-219. As a result, the detection limit of JNU-220 for the ratiometric luminescence sensing of PO43- was determined to be as low as 0.22 μM, which is far superior to those of other reported MOF materials. Additionally, we demonstrate the excellent stability and reusability of JNU-220, further verifying its potential as a robust ratiometric luminescence probe.

Dual-ligand two-dimensional terbium-organic frameworks nanosheets for ratiometric fluorescence detection of phosphate

Here, we reported a ratiometric fluorescence strategy for the detection of phosphate (Pi) in artificial wetland water. The strategy was based on dual-ligand two-dimensional terbium-organic frameworks nanosheets (2D Tb-NB MOFs). 2D Tb-NB MOFs were prepared through blending 5-boronoisophthalic acid (5-bop), 2-aminoterephthalic acid (NH₂-BDC) and Tb³⁺ ions at room temperature in the presence of triethylamine (TEA). The dual-ligand strategy realized dual emission originated from ligand NH₂-BDC and Tb³⁺ ions at 424 and 544 nm, respectively. Pi could compete with ligands to coordinate Tb³⁺ due to the strong binding ability between Pi and Tb³⁺, resulting in structural destruction of 2D Tb-NB MOFs, so static quenching and antenna effect between ligands and metal ions were interrupted, and emission at 424 nm was enhanced and emission at 544 nm was weakened. This novel probe had excellent linearity with Pi concentrations from 1 to 50 μmol/L; the detection limit was 0.16 μmol/L. This work revealed that mixed ligands improved sensing efficiency of MOFs by enhancing the sensitivity of the coordination between the analyte and MOFs.

Rapid detection of the biomarker for cystinuria by a metal-organic framework fluorescent sensor

Arginine (Arg) is considered a valuable biomarker for various diseases, including cystinuria, and its concentration level holds significant implications for human health. To achieve the purposes of food evaluation and clinical diagnosis, it is imperative to develop a rapid and facile method for selective and sensitive determination of Arg. In this work, a novel fluorescent material (Ag/Eu/CDs@UiO-66) was synthesized by encapsulating carbon dots (CDs), Eu³⁺ and Ag ⁺ into UiO-66. This material can serve as a ratiometric fluorescent probe for detecting Arg. It exhibits a high sensitivity with a detection limit of 0.74 μM and a relatively broad linear range from 0-300 μM. After dispersing the composite Ag/Eu/CDs@UiO-66 in an Arg solution, the red emission of Eu³⁺ center at 613 nm was significantly enhanced, while the characteristic peak of CDs center at 440 nm remained unchanged. Therefore, a ratio fluorescence probe could be constructed based on the peak height ratio of the two emission peaks to achieve selective detection of Arg. In addition, the remarkable ratiometric luminescence response induced by Arg results in a significant color transition from blue to red under UV-lamp for Ag/Eu/CDs@UiO-66, which was convenient for visual analysis.

Mn-doped Ti-based MOFs for magnetic resonance imaging-guided synergistic microwave thermal and microwave dynamic therapy of liver cancer

Currently, precise ablation of tumors without damaging the surrounding normal tissue is still an urgent problem for clinical microwave therapy of liver cancer. Herein, we synthesized Mn-doped Ti MOFs (Mn–Ti MOFs) nanosheets by in-situ doping method and applied them for microwave therapy. Infrared thermal imaging results indicate Mn–Ti MOFs can rapidly increase the temperature of normal saline, attributing to the porous structure improving microwave-induced ion collision frequency. Moreover, Mn–Ti MOFs show higher ¹O₂ output than Ti MOFs under 2 W of low-power microwave irradiation due to the narrower band-gap after Mn doping. At the same time, Mn endows the MOFs with a desirable T₁ contrast of magnetic resonance imaging (r₂/r₁ = 2.315). Further, results on HepG2 tumor-bearing mice prove that microwave-triggered Mn–Ti MOFs nearly eradicate the tumors after 14 days of treatment. Our study offers a promising sensitizer for synergistic microwave thermal and microwave dynamic therapy of liver cancer.

•

Mn-doped Ti-MOFs nanosheets (Mn–Ti MOFs) were synthesized as novel microwave sensitizers.

•

Mn–Ti MOFs can significantly generate heat and produce ROS under low-power microwave irradiation.

•

The combination of microwave thermal therapy and microwave dynamic therapy can effectively inhibit the growth of tumor cells in vitro and in vivo.

•

The microwave sensitizers have potential application in MRI-guided microwave therapy for liver cancer.

A ratiometric fluorescent probe based on a dual-ligand lanthanide metal–organic framework (MOF) for sensitive detection of aluminium and fluoride ions in river and tap water

A dual-emission fluorescent probe towards Al3+ and F− using a Ln-MOF material Eu-BDC-NH2/TDA is employed with exceptional sensitivity, high selectivity, low LOD, excellent anti-interference characteristics and direct visual observation.

Lanthanide-Based Langmuir–Blodgett Multilayers: Multi-Emissive, Temperature-Dependent Thin Films

Multi-emissive compounds have attracted significant attention from the research community owing to the wide array of potential application areas. However, to move towards application, such systems should be readily immobilized by solution-based methods to form soft materials such as gels and films. Herein we report the use of Langmuir–Blodgett (LB) deposition to easily immobilize luminescent lanthanide-based amphiphilic solids into multi-emissive ultrathin LB films, by multilayering different luminescent amphiphiles. Utilizing this technique, we have reliably fabricated dual- and triple-emissive films where the overall emission from the film is tuned. Furthermore, we have demonstrated that these multi-emissive films are temperature-dependent, with emission profiles significantly altering from 294 to 340 K, resulting in colour changes and potential application as ultrathin, contactless ratiometric thermometer coatings.

Cerium-based nanoparticles triggered catalytic reaction for the colorimetric and ratiometric fluorimetric dual-signal sensing of vitamin C

The construction of multi-modal detection methods has attracted widespread attention in the field of biosensing due to their high sensitivity and strong anti-interference ability. In this manuscript, we developed colorimetric and ratiometric fluorescence dual-signal optical methods based on cerium-based nanoparticles (Ce NPs) for the sensitive detection of vitamin C (VC). The catalysis of Ce NPs with excellent peroxidase-like activity upon the reaction of H₂O₂ with OPD was occurred, promoting the oxidation of o-phenylenediamine (OPD) to generate 2,3-diaminophennazine (OPDox) with an obvious absorption peak at 420 nm and an emission peak at 565 nm. In the presence of VC, VC not only inhibited the generation of OPDox, but also induced the formation of quinoxaline with an obvious absorption peak at 336 nm and an emission peak at 430 nm. This can be visually observed and monitored by measuring the absorbance of peak at 336 nm (A₃₃₆) and the ratiometric fluorescence intensity (F₄₃₀/F₅₆₅). Therefore, the dual-signal methods are constructed for the detection of VC. The detection lower detection limits are 8.0 μM and 8.4 μM when using the fluorescence and colorimetric signals, respectively. Furthermore, the proposed methods are successfully applied to the detection of VC in practical samples with satisfactory results.

Rhodamine B functionalized luminescent metal-organic frameworks for ratiometric fluorescence sensing of hydroquinone

The development of sensitive and selective detection methods for hydroquinone (HQ), a phenolic organic compound with high toxicity and low degradability, is of extraordinary importance. In this work, a fluorescent sensor based on functionalized luminescent metal-organic frameworks (LMOFs) was designed and applied for the ratiometric fluorescence sensing of HQ. The sensor was prepared by the functionalization of IRMOF-3 with rhodamine B (RhB), possessing dual-emission fluorescence properties. After the addition of HQ, the blue fluorescence of the IRMOF-3 framework was gradually weakened, while the red fluorescence of RhB remained unchanged, resulting in the continuous fluorescence change of RhB@IRMOF-3 with HQ concentrations. The sensing mechanism demonstrates that HQ changes the fluorescence of the sensor via electron transfer between benzoquinone and RhB@IRMOF-3. The RhB@IRMOF-3 sensor has the advantages of a wide linear range, quick response speed, and strong specificity for HQ detection. This work is the first attempt focusing on functionalized LMOFs for HQ fluorescence detection, which has superb potential for the application to real environmental water samples.

Detection of Heavy Metal Ions by Ratiometric Photoelectric Sensor

In recent years, heavy metal pollution has become increasingly serious. Heavy metals exist in an environment mainly in the form of ions (heavy metal ions, HMs). They can contaminate food, water, soil, and the atmosphere, leading to serious harm to plants and animals. With high bioavailability and nonbiodegradability, HMs can accumulate through biomagnification. Consequently, heavy metal pollution has become the cause of many fatal diseases threatening human health and ecological environment. Therefore, the accurate detection of HMs is vital and necessary. In this paper, the harm and limit standards of heavy metals were systematically summarized and the common analysis methods were overviewed and compared. Specifically, the latest research progress of ratiometric photoelectric sensor, including optical and electrical sensor, were mainly described. The research status and advantages and disadvantages of a photoelectric sensor were summarized. Furthermore, the future directions were proposed, which provided the reference for the further research and application of the ratiometric photoelectric sensor.

Dynamic Anticounterfeiting Through Novel Photochromic Spiropyran-Based Switch@Ln-MOF Composites

Fluorescent materials presenting unique color changes in response to external stimuli have wide applications in information storage and anticounterfeiting. However, developing intelligent fluorescent materials with high security levels and dynamically displaying encrypted information is still a challenge. Herein, we report a new method for constructing excellent fluorescent materials by loading the photochromic molecule spiropyran into a lanthanide metal-organic framework. Controlling the isomerization of the spiropyran unit regulates the fluorescence resonance energy transfer (FRET) mechanism between the spiropyran acceptor and the lanthanide donor, leading to an exceptional reversible absorption/luminescence modulation ability. As the irradiation time is extended, the fluorescent color changes continuously from yellow-greenish to orange and then to red through the FRET process within 60 s. This composite system has great potential in anticounterfeiting because of the following advantages: (1) the materials have different fluorescence emissions and optical colors regulated by ultraviolet radiation, which is convenient for designing complex anticounterfeiting patterns; (2) the system can be repeatedly verified quickly and exhibit dynamic fluorescence color within 60 s, having great potential in advanced anticounterfeiting, where time is key in encryption/decryption. These unique advantages will greatly enhance the reliability of anticounterfeiting measures and increase the difficulty of anticounterfeiting.

Water-Stable Eu6-Cluster-Based fcu-MOF with Exposed Vinyl Groups for Ratiometric and Fluorescent Visual Sensing of Hydrogen Sulfide

Detection of H₂S in the biological system has attracted enormous attention in recent years. In this work, a new vinyl-functionalized metal-organic framework (MOF), [(Me₂NH₂)₂] [Eu₆(μ₃-OH)₈(BDC-CH═CH₂)₆(H₂O)₆] (Eu-BDC-CH═CH₂, BDC-CH═CH₂ = 2-vinylterephthalic acid), was synthesized under solvothermal conditions. The vinyl groups in the ligands can not only modulate the "antenna effect" of the ligand on Eu³⁺ ions but also serve as an exposed reactive site to allow for the quantitative detection of H₂S by Eu-BDC-CH═CH₂. The ratiometric fluorescent probe has the advantages of water stability, acid-base stability (pH = 2-11), fast response (<2 min), high selectivity, and sensitivity (LOD = 38.4 μM). We also used Eu-BDC-CH═CH₂ to detect and analyze H₂S in tap and lake waters, demonstrating the potential of the probe for biological and environmental applications. In addition, the MOF-based agarose hydrogel film allows for the visual detection of H₂S via a smartphone by identifying the RGB values. The vinyl-functionalized MOF can thus be a powerful sensing platform for H₂S.

Design and Multiple Applications of Mixed-Ligand Metal-Organic Frameworks with Dual Emission

Herein, we revealed the factors that affect the emission in mixed-ligand metal-organic frameworks (MOFs) with the combination of terephthalic acid (BDC), 2-aminoterephthalic acid (BDC-NH₂), and 2,5-dihydroxylterephthalic acid [BDC-(OH)₂] as models. The -NH₂ and -(OH)₂ groups change the π-conjugation and luminescence behaviors than BDC, so the ligands show different optical behaviors. The Zn²⁺ ion with a 3d¹⁰ full electronic structure shows little effect on the emission of the ligand and is selected as the metal node. We found that the emission of BDC is weak and incompatible to that of BDC-NH₂, so only the emission of BDC-NH₂ was observed in the BDC/BDC-NH₂-MOF. Crosstalk occurs between the emissions from BDC and BDC-(OH)₂ for the single emission from BDC/BDC-(OH)₂-MOFs, even different ratios are selected. The MOFs prepared with BDC-NH₂ and BDC-(OH)₂ show dual emission at 450 and 550 nm, while the relative intensity was easily tuned with the ligand ratio and excitation wavelength. Thus, abundant optical behaviors and extensive applications were realized, including but not limited to (1) dual emission from single MOFs, (2) tunable color from blue to yellow with the excitation from 290 to 370 nm for information encryption and decryption, (3) white emission obtained under an excitation of 330 nm, and (4) response of -NH₂ groups to HCHO and Fe³⁺ ions for ratiometric fluorescence sensing and visual detection. This work revealed the factors that affect the emission in mixed-ligand MOFs, studied their optical behaviors, and realized different applications with single MOFs.

Metal-Organic Frameworks Encapsulating Carbon Dots Enable Fast Speciation of Mono- and Divalent Copper

Copper is an essential element to play significant roles in human health associated to the strong redox properties of Cu(I) and Cu(II). The concurrent monitoring of copper species in biological matrixes is highly desired. Herein, a dual-channel fluorescence nanoprobe was designed for the speciation of mono- and divalent copper by conjugating carbon dots (CDs) with Eu-based metal-organic frameworks (Eu-MOFs). The obtained Eu-MOFs@CD nanoprobe exhibits fluorescence at λ_ex/λ_em = 380/454 nm from CDs and λ_ex/λ_em = 275/615 nm from Eu-MOFs. Bathocuproine disulfonate (BCS) specifically chelates Cu⁺ to produce a BCS-Cu⁺ adduct with absorption at 480 nm, which quenches the fluorescence of CDs at 454 nm due to the inner filter effect. On the other hand, Cu²⁺ quenches the fluorescence of Eu-MOFs due to the replacement of Eu³⁺ by Cu²⁺. Thus, Eu-MOFs@CDs enable extremely fast detection of Cu⁺ and Cu²⁺ within 1 min. Furthermore, the nanoprobe is demonstrated by monitoring the variation of Cu⁺ and Cu²⁺ in the degradation process of copper nanoparticles and Cu-based MOFs.

Flexible ligand–Gd dye-encapsulated dual-emission metal–organic framework

We revealed the general considerations for host–guest ML-MOFs from the perspectives of ligands, metal nodes and embedded dyes. The results can be used to guide the preparation of other ML-MOFs to realize the host–guest strategy.