Iron Selenide-Based Heterojunction Construction and Defect Engineering for Fast Potassium/Sodium-Ion Storage

2D Se-Rich ZnSe/CoSe2@C Heterostructured Composite as Ultrastable Anodes for Alkaline-Ion Batteries

2D transitional metal selenide heterostructures are promising electrode materials for potassium-ion batteries (PIBs) owing to the large surface area, high mechanical strength, and short diffusion pathways. However, the cycling performance remains a significant challenge, particularly concerning the electrochemical conversion reaction. Herein, 2D Se-rich ZnSe/CoSe2@C heterostructured composite is fabricated via a convenient hydrothermal approach followed by selenization process, and then applied as high-performance anodes for PIBs. For example, the capacity delivered by the heterostructured composite is mainly contributed to the synergistic effect of conversion and alloy/de-alloy processes aroused by K+, where K+ may highly insert or de-insert into Se-rich ZnSe/CoSe2@C. The obtained electrode delivers an outstanding reversible charge capacity of 214 mA h g-1 at 1 A g-1 after 4000 cycles for PIBs, and achieves 262 mAh g-1 when coupled with a PTCDA cathode in the full cell. The electrochemical conversion mechanism of the optimized electrode during cycling is investigated through in situ XRD, Raman, and ex situ HRTEM. In addition, the heterostructured composite as anodes also displays excellent electrochemical performances for sodium-ion batteries (SIBs) and lithium-ion batteries (LIBs). This work opens up a new window for investigating novel electrode materials with excellent capacity and long durability.

Strain Self-Adaptive Iron Selenides Toward Stable Na+-Ion Batteries with Impressive Initial Coulombic Efficiency

High tap density electrodes play a vital role in developing rechargeable batteries with high volumetric capacities, however, developing advanced electrodes with satisfied capacity, excellent structural stability, and achieving the resulted batteries with a high initial Coulombic efficiency (ICE) and good rate capability with long lifespan simultaneously, are still an intractable challenge. Herein, an ultrahigh ICE of 94.1% and stable cycling of carbon-free iron selenides anode is enabled with a high tap density of 2.57 g cm-3 up to 4000 cycles at 5 A g-1 through strain-modulating by constructing a homologous heterostructure. Systematical characterization and theoretical calculation show that the self-adaptive homologous heterointerface alleviates the stress of the iron selenide anodes during cycling processes and subsequently improves the stability of the assembled batteries. Additionally, the well-formed homologous heterostructure also contributes to the rapid Na+ diffusion kinetic, increased charge transfer, and good reversibility of the transformation reactions, endowing the appealing rate capability of carbon-free iron selenides. The proposed design strategy provides new insight and inspiration to aid in the ongoing quest for advanced electrode materials with high tap densities and excellent stability.

Se-p Orbitals Induced "Strong d-d Orbitals Interaction" Enable High Reversibility of Se-Rich ZnSe/MnSe@C Electrode as Excellent Host for Sodium-Ion Storage

The heterostructure of transition-metal chalcogenides is a promising approach to boost alkali ion storage due to fast charge kinetics and reduction of activation energy. However, cycling performance is a paramount challenge that is suffering from poor reversibility. Herein, it is reported that Se-rich particles can chemically interact with local hexagonal ZnSe/MnSe@C heterostructure environment, leading to effective ions insertion/extraction, enabling high reversibility. Enlightened by theoretical understanding, Se-rich particles endow high intrinsic conductivities in term of low energy barriers (1.32 eV) compared with those without Se-rich particles (1.50 eV) toward the sodiation process. Moreover, p orbitals of Se-rich particles may actively participate and further increase the electronegativity that pushes the Mn d orbitals (dxy and dx2-y2) and donate their electrons to dxz and dyz orbitals, manifesting strong d-d orbitals interaction between ZnSe and MnSe. Such fundamental interaction will adopt a well-stable conducive electronic bridge, eventually, charges are easily transferred from ZnSe to MnSe in the heterostructure during sodiation/desodiation. Therefore, the optimized Se-rich ZnSe/MnSe@C electrode delivered high capacity of 576 mAh g-1 at 0.1 A g-1 after 100 cycles and 384 mAh g-1 at 1 A g-1 after 2500 cycles, respectively. In situ and ex situ measurements further indicate the integrity and reversibility of the electrode materials upon charging/discharging.

In Situ Ions Induced Formation of KxF-Rich SEI Layers toward Ultrastable Life of Potassium-Ion Batteries

Engineering F-rich solid electrolyte interphase (SEI) layers is regarded as an effective strategy to enable the long-term cycling stability of potassium-ion batteries (KIBs). However, in the conventional KPF6 carbonate electrolytes, it is challenging to form F-containing SEI layers due to the inability of KPF6 to decompose into KxF. Herein, AlCl3 is employed as a novel additive to change the chemical environment of the KPF6 carbonate electrolyte. First, due to the large charge-to-radius ratio of Al3+, the Al-containing groups in the electrolyte can easily capture F from PF6 - and accelerate the formation of KxF in SEI layer. In addition, AlCl3 also reacts with trace H2O or solvents in the electrolytes to form Al2O3, which can further act as a HF scavenger. Upon incorporating AlCl3 into conventional KPF6 carbonate electrolyte, the hard carbon (HC) anode exhibits an ultra-long lifespan of 10000 cycles with a high coulombic efficiency of ≈100%. When coupled with perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA), the full cell exhibits a high capacity retention of 81% after 360 cycles-significantly outperforming cells using conventional electrolytes. This research paves new avenues for advancing electrolyte engineering towards developing durable batteries tailored for large-scale energy storage applications.

Heterogeneous engineering and carbon confinement strategy to synergistically boost the sodium storage performance of transition metal selenides

Transition metal selenides (TMSs) stand out as a promising anode material for sodium-ion batteries (SIBs) owing to their natural resources and exceptional sodium storage capacity. Despite these advantages, their practical application faces challenges, such as poor electronic conductivity, sluggish reaction kinetics and severe agglomeration during electrochemical reactions, hindering their effective utilization. Herein, the dual-carbon-confined CoSe2/FeSe2@NC@C nanocubes with heterogeneous structure are synthesized using ZIF-67 as the template by ion exchange, resorcin-formaldehyde (RF) coating, and subsequent in situ carbonization and selenidation. The N-doped porous carbon promotes rapid electrolyte penetration and minimizes the agglomeration of active materials during charging and discharging, while the RF-derived carbon framework reduces the cycling stress and keeps the integrity of the material structure. More importantly, the built-in electric field at the heterogeneous boundary layer drives electron redistribution, optimizing the electronic structure and enhancing the reaction kinetics of the anode material. Based on this, the nanocubes of CoSe2/FeSe2@NC@C exhibits superb sodium storage performance, delivering a high discharge capacity of 512.6 mA h g-1 at 0.5 A g-1 after 150 cycles and giving a discharge capacity of 298.2 mA h g-1 at 10 A g-1 with a CE close to 100.0 % even after 1000 cycles. This study proposes a viable method to synthesize advanced anodes for SIBs by a synergy effect of heterogeneous interfacial engineering and a carbon confinement strategy.

Progress and perspectives on iron-based electrode materials for alkali metal-ion batteries: a critical review

Iron-based materials with significant physicochemical properties, including high theoretical capacity, low cost and mechanical and thermal stability, have attracted research attention as electrode materials for alkali metal-ion batteries (AMIBs). However, practical implementation of some iron-based materials is impeded by their poor conductivity, large volume change, and irreversible phase transition during electrochemical reactions. In this review we critically assess advances in the chemical synthesis and structural design, together with modification strategies, of iron-based compounds for AMIBs, to obviate these issues. We assess and categorize structural and compositional regulation and its effects on the working mechanisms and electrochemical performances of AMIBs. We establish insight into their applications and determine practical challenges in their development. We provide perspectives on future directions and likely outcomes. We conclude that for boosted electrochemical performance there is a need for better design of structures and compositions to increase ionic/electronic conductivity and the contact area between active materials and electrolytes and to obviate the large volume change and low conductivity. Findings will be of interest and benefit to researchers and manufacturers for sustainable development of advanced rechargeable ion batteries using iron-based electrode materials.

Biomass-Derived Carbon Materials for Electrochemical Energy Storage

The environmental impact from the waste disposal has been widely concerned around the world. The conversion of wastes to useful resources is important for the sustainable society. As a typical family of wastes, biomass materials basically composed of collagen, protein and lignin are considered as useful resources for recycle and reuse. In recent years, the development of carbon material derived from biomasses, such as plants, crops, animals and their application in electrochemical energy storage have attracted extensive attention. Through the selection of the appropriate biomass, the optimization of the activation method and the control of the pyrolysis temperatures, carbon materials with desired features, such as high-specific surface area, variable porous framework, and controllable heteroatom-doping have been fabricated. Herein, this review summarized the preparation methods, morphologies, heteroatoms doping in the plant/animal-derived carbonaceous materials, and their application as electrode materials for secondary batteries and supercapacitors, and as electrode support for lithium-sulfur batteries. The challenges and prospects for the controllable synthesis and large-scale application of biomass-derived carbonaceous materials have also been outlooked.

Metal-Organic Framework-Based Materials for Advanced Sodium Storage: Development and Anticipation

As a pioneering battery technology, even though sodium-ion batteries (SIBs) are safe, non-flammable, and capable of exhibiting better temperature endurance performance than lithium-ion batteries (LIBs), because of lower energy density and larger ionic size, they are not amicable for large-scale applications. Generally, the electrochemical storage performance of a secondary battery can be improved by monitoring the composition and morphology of electrode materials. Because more is the intricacy of a nanostructured composite electrode material, more electrochemical storage applications would be expected. Despite the conventional methods suitable for practical production, the synthesis of metal-organic frameworks (MOFs) would offer enormous opportunities for next-generation battery applications by delicately systematizing the structure and composition at the molecular level to store sodium ions with larger sizes compared with lithium ions. Here, the review comprehensively discusses the progress of nanostructured MOFs and their derivatives applied as negative and positive electrode materials for effective sodium storage in SIBs. The commercialization goal has prompted the development of MOFs and their derivatives as electrode materials, before which the synthesis and mechanism for MOF-based SIB electrodes with improved sodium storage performance are systematically discussed. Finally, the existing challenges, possible perspectives, and future opportunities will be anticipated.

An oriented tube array porous carbon anode prepared using a self-blowing mold of salt templates for high-rate potassium storage

Porous carbon materials with oriented porosity are very useful in ion batteries, but their high cost and complex fabrication hinder their wide application. In this paper, we used cheap and water-soluble NaHCO3 grains to prepare unique porous carbon with an orderly arranged tube array via one-step carbonization. During the preparation process, a novel self-blowing mold of salt templates was discovered for the first time, and the resulting numerous high-speed gas jets can act as gas state templates to induce the formation of the oriented porous carbon into a mesoscale tube array with rich micropores. Besides, the amount of CO functional groups has been enhanced greatly by the chemical activation of H2O and CO2 derived from the decomposition of NaHCO3, which can improve the reversible specific capacity of the electrode by forming a C-O-K compound with potassium. Thanks to the coupling effect of the hierarchical porous structure with an orderly tube array and rich CO functional groups, the obtained porous carbon materials exhibited excellent kinetics and impressive rate capability as the anode of potassium-ion batteries (PIBs) with high capacities of 209 mA h g-1 at 10 A g-1 and 156 mA h g-1 at 30 A g-1. This work not only provides a facile, green, sustainable approach to fabricating novel carbon materials, but also demonstrates the promising prospect of oriented porous carbon in exploring advanced electrode materials for PIBs.

Boosting the sodium storage performance of iron selenides by a synergetic effect of vacancy engineering and spatial confinement

Recently, iron selenides have been considered as one of the most promising candidates for the anodes of sodium-ion batteries (SIBs) due to their cost-effectiveness and high theoretical capacity; however, their practical application is limited by poor conductivity, large volume variation and slow reaction kinetics during electrochemical reactions. In this work, spatially dual-carbon-confined VSe-Fe3Se4-xSx/FeSe2-xSx nanohybrids with abundant Se vacancies (VSe-Fe3Se4-xSx/FeSe2-xSx@NSC@rGO) are constructed via anion doping and carbon confinement engineering. The three-dimensional crosslinked carbon network composed of the nitrogen-doped carbon support derived from polyacrylic acid (PAA) and reduced graphene enhances the electronic conductivity, provides abundant channels for ion/electron transfer, ensures the structure integrity, and alleviates the agglomeration, pulverization and volume change of active material during the chemical reactions. Moreover, the introduction of S into iron selenides induces a large number of Se vacancies and regulates the electron density around iron atoms, synergistically improving the conductivity of the material and reducing the Na+ diffusion barrier. Based on the aforementioned features, the as-synthesized VSe-Fe3Se4-xSx/FeSe2-xSx@NSC@rGO electrode possesses excellent electrochemical properties, exhibiting the satisfactory specific capacity of 630.1 mA h g-1 after 160 cycles at 0.5 A/g and the reversible capacity of 319.8 mA h g-1 after 500 cycles at 3 A/g with the low-capacity attenuation of 0.016 % per cycle. This investigation provides a feasible approach to develop high-performance anodes for SIBs via a synergetic strategy of vacancy engineering and carbon confinement.

Structural regulation enabled stable hollow molybdenum diselenide nanosheet anode for ultrahigh energy density sodium ion pouch cell

For the continued use of sodium-ion batteries (SIBs), which require matching anode materials, it is crucial to create high energy density energy storage devices. Here, hollow nanoboxes shaped carbon supported sulfur-doped MoSe2 nanosheets (S-MoSe2@NC) are fabricated by in situ growth and heterodoping strategy. This ensures that the MoSe2 nanosheets are tightly anchored to the nanoboxes carbon, and the structure can effectively buffer the volume stress caused by sodium ion (de)intercalation, as well as providing abundant ion/electron migration transportations. As anode for SIBs, the S-MoSe2@NC shows a higher rate capability and excellent cycling stability (431.1 mAh/g after 1100 cycles at 10 A/g). This excellent cycle life and high rate ability are due to the structural stability and outstanding electronic conductance with reduced band gap of the S-MoSe2@NC, as evidenced by the diffusion analysis and theoretical calculation. In order to promote the application of SIBs, the S-MoSe2@NC and NaNi1/3Fe1/3Mn1/3O2 were assembled into a pouch cell, and the test found that besides the excellent cycle rate performance, the ultrahigh energy density of 256 Wh kg-1 and flexible characteristics can be achieved. This study has proven that building a structure with a rock-steady foundation and quick ion migration may efficiently control sodium storage and pave the way for novel applications of high-performance transition metal dichalcogenides in sodium storage.

Ultrafast and ultrastable FeSe2embedded in nitrogen-doped carbon nanofibers anode for sodium-ion half/full batteries

Transition metal selenides are considered as promising anode materials for fast-charging sodium-ion batteries due to their high theoretical specific capacity. However, the low intrinsic conductivity, particle aggregation, and large volume expansion problems can severely inhibit the high-rate and long-cycle performance of the electrode. Herein, FeSe2nanoparticles embedded in nitrogen-doped carbon nanofibers (FeSe2@NCF) have been synthesized using the electrospinning and selenization process, which can alleviate the volume expansion and particle aggregation during the sodiation/desodiation and improve the electrical conductivity of the electrode. The FeSe2@NCF electrode delivers the outstanding specific capacity of 222.3 mAh g-1at a fast current density of 50 A g-1and 262.1 mAh g-1at 10 A g-1with the 87.8% capacity retention after 5000 cycles. Furthermore, the Na-ion full cells assembled with pre-sodiated FeSe2@NCF as anode and Na3V2(PO4)3/C as cathode exhibit the reversible specific capacity of 117.6 mAh g-1at 5 A g-1with the 84.3% capacity retention after 1000 cycles. This work provides a promising way for the conversion-based metal selenides for the applications as fast-charging sodium-ion battery anode.

Synergistic effect of intercalation and EDLC electrosorption of 2D/3D interconnected architectures to boost capacitive deionization for water desalination via MoSe2/mesoporous carbon hollow spheres

Transition-metal dichalcogenides can be used for capacitive deionization (CDI) via pseudocapacitive ion intercalation/de-intercalation due to their unique two-dimensional (2D) laminar structure. MoS₂ has been extensively studied in the hybrid capacitive deionization (HCDI), but the desalination performance of MoS₂-based electrodes remains only 20-35 mg g^-1 on average. Benefiting from the higher conductivity and larger layer spacing of MoSe₂ than MoS₂, it is expected that MoSe₂ would exhibit a superior HCDI desalination performance. Herein, for the first time, we explored the use of MoSe₂ in HCDI and synthesized a novel MoSe₂/MCHS composite material by utilizing mesoporous carbon hollow spheres (MCHS) as the growth substrate to inhibit the aggregation and improve the conductivity of MoSe₂. The as-obtained MoSe₂/MCHS presented unique 2D/3D interconnected architectures, allowing for synergistic effects of intercalation pseudocapacitance and electrical double layer capacitance (EDLC). An excellent salt adsorption capacity of 45.25 mg g^- 1 and a high salt removal rate of 7.75 mg g^- 1 min^-1 were achieved in 500 mg L^- 1 NaCl feed solution at an applied voltage of 1.2 V in batch-mode tests. Moreover, the MoSe₂/MCHS electrode exhibited outstanding cycling performance and low energy consumption, making it suitable for practical applications. This work demonstrates the promising application of selenides in CDI and provides new insights for ration design of high-performance composite electrode materials.

3D space-confined Co0.85Se architecture with effective interfacial stress relaxation as anode material reveals robust and highly loading potassium-ion batteries

Conversion-type transition metal chalcogenide anodes could bring relatively high specific capacity in potassium ion storage due to multiple electron transport reactions, but often accompanying huge volume changes and resulting in low cycle life and rapid capacity fading.While electrode materials are closely packed, the contact at the interface during potassiation/depotassiation is similar to point-to-point contact, generating strong stress to make self-aggregation occur. In this work, we constructed a 3D carbon framework to confine Co_0.85Se nanocrystals in three-dimensional space, both fulfilling the requirements of the material's size in the nano-scale and providing the largest contact area for releasing stress. With this optimization, nitrogen-doped carbon confined Co_0.85Se nanocrystals (Co_0.85Se@NC) reach an ultra-stable cycle life over 4000 times with a specific capacity of 190.9 mA h g^-1 at 500 mA g^-1 and provide 155.6 mA h g^-1 at 10 A g^-1 in the rate capability test. It also renders the areal capacity up to 1.03 mA h cm^-2 at 500 mA g^-1 in the high-mass loading test. Furthermore, based on the finite element analysis, the 3D confinement strategy has the lowest interfacial stress, ensuring Co_0.85Se nanocrystals with high structural integrity. This strategy can relieve the stress issue in the conversion-type anode and demonstrate superior electrochemical performance even at high-loading mass electrodes.

Confine, Defect, and Interface Manipulation of Fe3 Se4 /3D Graphene Targeting Fast and Stable Potassium-Ion Storage

The fast electrochemical kinetics behavior and long cycling life have been the goals in developing anode materials for potassium ion batteries (PIBs). On account of high electron conductivity and theoretical capacity, transition metal selenides have been deemed as one of the promising anode materials for PIBs. Herein, a systematic structural manipulation strategy, pertaining to the confine of Fe₃ Se₄ particles by 3D graphene and the dual phosphorus (P) doping to the Fe₃ Se₄ /3DG (DP-Fe₃ Se₄ /3DG), has been proposed to fulfill the efficient potassium-ion (K-ion) evolution kinetics and thus boost the K-ion storage performance. The theoretical calculation results demonstrate that the well-designed dual P doping interface can effectively promote K-ion adsorption behavior and provide a low energy barrier for K-ion diffusion. The insertion-conversion and adsorption mechanism for multi potassium storage behavior in DP-Fe₃ Se₄ /3DG composite has been also deciphered by combining the in situ/ex situ X-ray diffraction and operando Raman spectra evidences. As expected, the DP-Fe₃ Se₄ /3DG anode exhibits superior rate capability (120.2 mA h g^-1 at 10 A g^-1 ) and outstanding cycling performance (157.9 mA h g^-1 after 1000 cycles at 5 A g^-1 ).

Thermodynamic Transformation of Crystalline Organic Hybrid Iron Selenide to FexSey@CN Microrods for Sodium Ion Storage

Carbon-coated metal chalcogenide composites have been demonstrated as one type of promising anode material for sodium-ion batteries (SIBs). However, combining carbon materials with micronanoparticles of metal chalcogenide always involve complicated processes, such as polymer coating, carbonization, and sulfidation/selenization. To address this issue, herein, we reported a series of carbon-coated FexSey@CN (FexSey = FeSe2, Fe3Se4, Fe7Se8) composites prepared via the thermodynamic transformation of a crystalline organic hybrid iron selenide [Fe(phen)2](Se4) (phen = 1,10-phenanthroline). By pyrolyzing the bulk crystals of [Fe(phen)2](Se4) at different temperatures, FexSey microrods were formed in situ, where the nitrogen-doped carbon layers were coated on the surface of the microrods. Moreover, all the as-prepared FexSey@CN composites exhibited excellent sodium-ion storage capabilities as anode materials in SIBs. This work proves that crystalline organic hybrid metal chalcogenides can be used as a novel material system for the in situ formation of carbon-coated metal chalcogenide composites, which could have great potential in the application of electrochemical energy storage.

Synergistic Engineering of Se Vacancies and Heterointerfaces in Zinc-Cobalt Selenide Anode for Highly Efficient Na-Ion Batteries

The exploitation of effective strategies to accelerate the Na⁺ diffusion kinetics and improve the structural stability in the electrode is extremely important for the development of high efficientcy sodium-ion batteries. Herein, Se vacancies and heterostructure engineering are utilized to improve the Na⁺ -storage performance of transition metal selenides anode prepared through a facile two-in-one route. The experimental results coupled with theoretical calculations reveal that the successful construction of the Se vacancies and heterostructure interfaces can effectively lower the Na⁺ diffusion barrier, accelerate the charge transfer efficiency, improve Na⁺ adsorption ability, and provide an abundance of active sites. Consequently, the batteries based on the constructed ZnSe/CoSe₂ -CN anode manifest a high initial Coulombic efficiency (97.7%), remarkable specific capacities (547.1 mAh g^-1 at 0.5 A g^-1 ), superb rate capability (362.1 mAh g^-1 at 20 A g^-1 ), as well as ultrastable long-term stability (1000 cycles) with a satisfied specific capacity (535.6 mAh g^-1 ) at 1 A g^-1 . This work facilitates an in-depth understanding of the synergistic effect of vacancies and heterojunctions in improving the Na⁺ reaction kinetics, providing an effective strategy to the rational design of key materials for high efficiency rechargeable batteries.