Bridging the Buried Interface with Piperazine Dihydriodide Layer for High Performance Inverted Solar Cells

Enhancing the Efficiency and Stability of Inverted Formamidinium-Cesium Lead-Triiodide Perovskite Solar Cells through Lewis Base Pretreatment of Buried Interfaces

Mixed components of formamidinium(FA) and cesium (Cs)-based perovskite solar cells are the most hopeful for commercialization owing to their excellent operational and phase stabilities, especially for devices with inverted structure. The nonradiative recombination of carriers can be effectively suppressed through interface optimization, therefore, the performance of devices can be improved. Notably, the buried interface emerges as critical aspects such as charge transport, charge recombination kinetics, and morphology of perovskite films. This study focuses on a straightforward yet effective approach to overcome buried interface challenges between organic polymers (poly(-triarylamine) (PTAA) and FACs-based perovskite films. The PTAA substrate is pretreated with a Lewis base known as 2-butynoic acid (BA) with a C═O functional group. First, it can be an interfacial buffering layer, harmonizing stress mismatch between the perovskite and PTAA layers, consequently optimizing crystallization and improving perovskite film quality. Second, Pb2+ defect can be passivated at the buried interface of the perovskite film through binding with the C═O group of the BA molecule. This dual-function strategy leads to a substantial enhancement in both photoelectric conversion efficiency (PCE) and stability of devices. Finally, the PCE of the device-modified buried interface with BA reaches an impressive 23.33%. Furthermore, unencapsulated devices with BA treatment maintain approximately 94% of their initial efficiency after aging at maximum power point tracking for 1000 h.

Inhomogeneous Halide Anions Distribution along Out-of-Plane Direction in Wide-Bandgap Perovskite Solar Cells and Its Effect on Open Circuit Voltage Loss and Phase Segregation

The large open circuit voltage (VOC) loss and phase segregation are two main obstacles hindering the development of wide-bandgap perovskite solar cells (PSCs). Even though substantial progress has been made through crystallization regulation and surface modification on perovskite, the mechanism of VOC loss and phase segregation has rarely been studied. In this paper, we first investigate the halide ions distribution along the out-of-plane direction and find the initial inhomogeneous distribution of halide ions during the crystallization process is an important reason. It leads to the formation of an unfavorable potential well in PSCs, resulting in VOC loss as well as generation of strong strain exacerbating phase segregation. Through introducing melatonin (MT) into perovskite precursors, a homogeneous distribution of halide anions is realized due to the well-regulated crystallization. Consequently, the treated PSCs exhibit an optimized power conversion efficiency (PCE) of 22.88% with a VOC loss as low as 0.38 V, which are the best values for wide-bandgap PSCs up to now.

Key Roles of Interfaces in Inverted Metal-Halide Perovskite Solar Cells

Metal-halide perovskite solar cells (PSCs), an emerging technology for transforming solar energy into a clean source of electricity, have reached efficiency levels comparable to those of commercial silicon cells. Compared with other types of PSCs, inverted perovskite solar cells (IPSCs) have shown promise with regard to commercialization due to their facile fabrication and excellent optoelectronic properties. The interlayer interfaces play an important role in the performance of perovskite cells, not only affecting charge transfer and transport, but also acting as a barrier against oxygen and moisture permeation. Herein, we describe and summarize the last three years of studies that summarize the advantages of interface engineering-based advances for the commercialization of IPSCs. This review includes a brief introduction of the structure and working principle of IPSCs, and analyzes how interfaces affect the performance of IPSC devices from the perspective of photovoltaic performance and device lifetime. In addition, a comprehensive summary of various interface engineering approaches to solving these problems and challenges in IPSCs, including the use of interlayers, interface modification, defect passivation, and others, is summarized. Moreover, based upon current developments and breakthroughs, fundamental and engineering perspectives on future commercialization pathways are provided for the innovation and design of next-generation IPSCs.

Multifunctional Trifluoroborate Additive for Simultaneous Carrier Dynamics Governance and Defects Passivation to Boost Efficiency and Stability of Inverted Perovskite Solar Cells

The main obstacles to promoting the commercialization of perovskite solar cells (PSCs) include their record power conversion efficiency (PCE), which still remains below the Shockley-Queisser limit, and poor long-term stability, attributable to crystallographic defects in perovskite films and open-circuit voltage (Voc) loss in devices. In this study, potassium (4-tert-butoxycarbonylpiperazin-1-yl) methyl trifluoroborate (PTFBK) was employed as a multifunctional additive to target and modulate bulk perovskite defects and carrier dynamics of PSCs. Apart from simultaneously passivating anionic and cationic defects, PTFBK could also optimize the energy-level alignment of devices and weaken the interaction between carriers and longitudinal optical phonons, resulting in a carrier lifetime of greater than 3 μs. Furthermore, it inhibited non-radiative recombination and improved the crystallization capacity in the target perovskite film. Hence, the target rigid and flexible p-i-n PSCs yielded champion PCEs of 24.99 % and 23.48 %, respectively. More importantly, due to hydrogen bonding between formamidinium and fluorine, the target devices exhibited remarkable thermal, humidity, and operational tracking at maximum power point stabilities. The reduced Young's modulus and residual stress in the perovskite layer also provided excellent bending stability for flexible target devices.

Strain Engineering and Halogen Compensation of Buried Interface in Polycrystalline Halide Perovskites

Inverted perovskite solar cells based on weakly polarized hole-transporting layers suffer from the problem of polarity mismatch with the perovskite precursor solution, resulting in a nonideal wetting surface. In addition to the bottom-up growth of the polycrystalline halide perovskite, this will inevitably worse the effects of residual strain and heterogeneity at the buried interface on the interfacial carrier transport and localized compositional deficiency. Here, we propose a multifunctional hybrid pre-embedding strategy to improve substrate wettability and address unfavorable strain and heterogeneities. By exposing the buried interface, it was found that the residual strain of the perovskite films was markedly reduced because of the presence of organic polyelectrolyte and imidazolium salt, which not only realized the halogen compensation and the coordination of Pb2+ but also the buried interface morphology and defect recombination that were well regulated. Benefitting from the above advantages, the power conversion efficiency of the targeted inverted devices with a bandgap of 1.62 eV was 21.93% and outstanding intrinsic stability. In addition, this coembedding strategy can be extended to devices with a bandgap of 1.55 eV, and the champion device achieved a power conversion efficiency of 23.74%. In addition, the optimized perovskite solar cells retained 91% of their initial efficiency (960 h) when exposed to an ambient relative humidity of 20%, with a T80 of 680 h under heating aging at 65 °C, exhibiting elevated durability.

Microstress for metal halide perovskite solar cells: from source to influence and management

The power conversion efficiency of metal halide perovskite solar cells (PSCs) has increased dramatically in recent years, but there are still major bottlenecks in the commercial application of such materials, including intrinsic instability caused by external stimuli such as water, oxygen, and radiation, as well as local stress generated inside the perovskite and external stress caused by poor interlayer contact. However, some crucial sources of instability cannot be overcome by conventional encapsulation engineering. Among them, the tensile strain can weaken the chemical bonds in the perovskite lattice, thereby reducing the defects formation energy and activation energy of ion migration and accelerating the degradation rate of the perovskite crystal. This review expounds the latest in-depth understanding of microstrain in perovskite film from the thermodynamic sources and influences on the perovskite physicochemical structure and photoelectric performance. Furthermore, it also summarizes the effective strategies for strain regulation and interlayer contact performance improvement, which are conducive to the improvement of photovoltaic performance and internal stability of PSCs. Finally, we present a prospective outlook on how to achieve more stable and higher efficiency PSCs through strain engineering.

Defect passivation in methylammonium/bromine free inverted perovskite solar cells using charge-modulated molecular bonding

Molecular passivation is a prominent approach for improving the performance and operation stability of halide perovskite solar cells (HPSCs). Herein, we reveal discernible effects of diammonium molecules with either an aryl or alkyl core onto Methylammonium-free perovskites. Piperazine dihydriodide (PZDI), characterized by an alkyl core-electron cloud-rich-NH terminal, proves effective in mitigating surface and bulk defects and modifying surface chemistry or interfacial energy band, ultimately leading to improved carrier extraction. Benefiting from superior PZDI passivation, the device achieves an impressive efficiency of 23.17% (area ~1 cm2) (low open circuit voltage deficit ~0.327 V) along with superior operational stability. We achieve a certified efficiency of ~21.47% (area ~1.024 cm2) for inverted HPSC. PZDI strengthens adhesion to the perovskite via -NH2I and Mulliken charge distribution. Device analysis corroborates that stronger bonding interaction attenuates the defect densities and suppresses ion migration. This work underscores the crucial role of bifunctional molecules with stronger surface adsorption in defect mitigation, setting the stage for the design of charge-regulated molecular passivation to enhance the performance and stability of HPSC.

Amphoteric Ion Bridged Buried Interface for Efficient and Stable Inverted Perovskite Solar Cells

Synergistic morphology and defects management at the buried perovskite interface are challenging but crucial for the further improvement of inverted perovskite solar cells (PerSCs). Herein, an amphoteric organic salt, 2-(4-fluorophenyl)ethylammonium-4-methyl benzenesulfonate (4FPEAPSA), is designed to optimize the film morphology and energy level alignment at the perovskite buried interface. 4FPEAPSA treatment promotes the growth of a void-free, coarse-grained, and hydrophobic film by inducing the crystal orientation. Besides, the dual-functional 4FPEAPSA can chemically interact with the perovskite film, and passivate the defects of iodine and formamidine vacancies, tending to revert the fermi level of perovskite to its defect-free state. Meanwhile, the formation of a p-type doping buried interface can facilitate the interfacial charge extraction and transport of PerSCs for reduced carrier recombination loss. Consequently, 4FPEAPSA treatment improves the efficiency of the perovskite devices to 25.03% with better storage, heat, and humidity stability. This work contributes to strengthening the systematic understanding of the perovskite buried interface, providing a synergetic approach to realize precise morphology control, effective defect suppression, and energy level alignment for efficient PerSCs.

Modulation of Buried Interface by 1-(3-aminopropyl)-Imidazole for Efficient Inverted Formamidinium-Cesium Perovskite Solar Cells

Considering the direct influence of substrate surface nature on perovskite (PVK) film growth, buried interfacial engineering is crucial to obtain ideal perovskite solar cells (PSCs). Herein, 1-(3-aminopropyl)-imidazole (API) is introduced at polytriarylamine (PTAA)/PVK interface to modulate the bottom property of PVK. First, the introduction of API improves the growth of PVK grains and reduces the Pb2+ defects and residual PbI2 present at the bottom of the film, contributing to the acquisition of high-quality PVK film. Besides, the presence of API can optimize the energy structure between PVK and PTAA, which facilitates the interfacial charge transfer. Density functional theory (DFT) reveals that the electron donor unit (R-C ═ N) of the API prefers to bind with Pb2+ traps at the PVK interface, while the formation of hydrogen bonds between the R-NH2 of API and I- strengthens the above binding ability. Consequently, the optimum API-treated inverted formamidinium-cesium (FA/Cs) PSCs yields a champion power conversion efficiency (PCE) of 22.02% and exhibited favorable stability.