Metal Chalcogenides with Heterostructures for High‐Performance Rechargeable Batteries

Unraveling the Intrinsic Origin of the Superior Sodium-Ion Storage Performance of Metal Selenides Anode in Ether-Based Electrolytes

Metal selenides show outstanding sodium-ion storage performance when matched with an ether-based electrolyte. However, the intrinsic origin of improvement and deterministic interface characteristics have not been systematically elucidated. Herein, employing FeSe2 anode as the model system, the electrochemical kinetics of metal selenides in ether and ester-based electrolytes and associated solid electrolyte interphase (SEI) are investigated in detail. Based on the galvanostatic intermittent titration technique and in situ electrochemical impedance spectroscopy, it is found that the ether-based electrolyte can ensure fast Na+ transfer and low interface impedance. Additionally, the ether-derived thin and smooth double-layer SEI, which is critical in facilitating ion transport, maintaining structural stability, and inhibiting electrolyte overdecomposition, is concretely visualized by transmission electron microscopy, atomic force microscopy, and depth-profiling X-ray photoelectron spectroscopy. This work provides a deep understanding of the optimization mechanism of electrolytes, which can guide available inspiration for the design of practical electrode materials.

Review of Transition Metal Chalcogenides and Halides as Electrode Materials for Thermal Batteries and Secondary Energy Storage Systems

Transition metal chalcogenides and halides (TMCs and TMHs) have been extensively used and reported as electrode materials in diverse primary and secondary batteries. This review summarizes the suitability of TMCs and TMHs as electrode materials focusing on thermal batteries (utilized for defense applications) and energy storage systems like mono- and multivalent rechargeable batteries. The report also identifies the specific physicochemical properties that need to be achieved for the same materials to be employed as cathode materials in thermal batteries and anode materials in monovalent rechargeable systems. For example, thermal stability of the materials plays a crucial role in delivering the performance of the thermal battery system, whereas the electrical conductivity and layered structure of similar materials play a vital role in enhancing the electrochemical performance of the mono- and multivalent rechargeable batteries. It can be summarized that nonlayered CoS2, FeS2, NiS2, and WS2 were found to be ideal as cathode materials for thermal batteries primarily due to their better thermal stability, whereas the layered structures of these materials with a coating of carbon allotrope (CNT, graphene, rGO) were found to be suitable as anode materials for monovalent alkali metal ion rechargeable batteries. On the other hand, vanadium, titanium, molybdenum, tin, and antimony based chalcogenides were found to be suitable as cathode materials for multivalent rechargeable batteries due to the high oxidation state of cathode materials which resists the stronger field produced during the interaction of di- and trivalent ions with the cathode material facilitating higher energy density with minimal structural and volume changes at a high rate of discharge.

Boosting the sodium storage performance of iron selenides by a synergetic effect of vacancy engineering and spatial confinement

Recently, iron selenides have been considered as one of the most promising candidates for the anodes of sodium-ion batteries (SIBs) due to their cost-effectiveness and high theoretical capacity; however, their practical application is limited by poor conductivity, large volume variation and slow reaction kinetics during electrochemical reactions. In this work, spatially dual-carbon-confined VSe-Fe3Se4-xSx/FeSe2-xSx nanohybrids with abundant Se vacancies (VSe-Fe3Se4-xSx/FeSe2-xSx@NSC@rGO) are constructed via anion doping and carbon confinement engineering. The three-dimensional crosslinked carbon network composed of the nitrogen-doped carbon support derived from polyacrylic acid (PAA) and reduced graphene enhances the electronic conductivity, provides abundant channels for ion/electron transfer, ensures the structure integrity, and alleviates the agglomeration, pulverization and volume change of active material during the chemical reactions. Moreover, the introduction of S into iron selenides induces a large number of Se vacancies and regulates the electron density around iron atoms, synergistically improving the conductivity of the material and reducing the Na+ diffusion barrier. Based on the aforementioned features, the as-synthesized VSe-Fe3Se4-xSx/FeSe2-xSx@NSC@rGO electrode possesses excellent electrochemical properties, exhibiting the satisfactory specific capacity of 630.1 mA h g-1 after 160 cycles at 0.5 A/g and the reversible capacity of 319.8 mA h g-1 after 500 cycles at 3 A/g with the low-capacity attenuation of 0.016 % per cycle. This investigation provides a feasible approach to develop high-performance anodes for SIBs via a synergetic strategy of vacancy engineering and carbon confinement.

Inorganic All-Solid-State Sodium Batteries: Electrolyte Designing and Interface Engineering

Inorganic all-solid-state sodium batteries (IASSSBs) are emerged as promising candidates to replace commercial lithium-ion batteries in large-scale energy storage systems due to their potential advantages, such as abundant raw materials, robust safety, low price, high-energy density, favorable reliability and stability. Inorganic sodium solid electrolytes (ISSEs) are an indispensable component of IASSSBs, gaining significant attention. Herein, this review begins by discussing the fundamentals of ISSEs, including their ionic conductivity, mechanical property, chemical and electrochemical stabilities. It then presents the crystal structures of advanced ISSEs (e.g., β/β''-alumina, NASICON, sulfides, complex hydride and halide electrolytes) and the related issues, along with corresponding modification strategies. The review also outlines effective approaches for forming intimate interfaces between ISSEs and working electrodes. Finally, current challenges and critical perspectives for the potential developments and possible directions to improve interfacial contacts for future practical applications of ISSEs are highlighted. This comprehensive review aims to advance the understanding and development of next-generation rechargeable IASSSBs.

Solvent-Free Ultrafast Construction of Se-Deficient Heterojunctions of Bimetallic Selenides toward Flexible Sodium-Ion Full Batteries

Flexible quasi-solid-state sodium ion batteries featuring their low-cost, high safety and excellent mechanical strength have attracted widespread interest in the field of wearable electronic devices. However, the development of such batteries faces great challenges including the construction of interfacial compatible flexible electrode materials and addressing the high safety demands of electrolyte. Here selenium-vacancies regulated bimetallic selenide heterojunctions anchored on waste cotton cloth-derived flexible carbon cloth (FCC) with robust interfacial C-Se-Co/Fe chemical bonds as a flexible anode material (CCFSF) is proposed by ultrafast microwave pyrolysis method. Rich selenium vacancies and CoSe2 /FeSe2-x heterostructures are synchronously formed that can significantly improve ionic and electronic diffusion kinetics. Additionally, a uniform carbon layer coating on the surface of Se-deficient heterostructures endows it with outstanding structural stability. The flexible cathode (PB@FCC) is also fabricated by directly growing Prussian blue nanoparticles on the FCC. Furthermore, an advanced flexible quasi-solid-state Na-ion pouch cell is assembled by coupling CCFSF anode, PB@FCC cathode with P(VDF-HFP)-based gel polymer electrolyte. The full cell not only demonstrates excellent energy storage performance but also robust mechanical flexibility and safety. The present work offers an effective avenue to achieve high safety flexible energy storage device, promoting the development of flexible wearable electronic devices.

Double-Walled NiTeSe-NiSe2 Nanotubes Anode for Stable and High-Rate Sodium-Ion Batteries

Electrodes made of composites with heterogeneous structure hold great potential for boosting ionic and charge transfer and accelerating electrochemical reaction kinetics. Herein, hierarchical and porous double-walled NiTeSe-NiSe₂ nanotubes are synthesized by a hydrothermal process assisted in situ selenization. Impressively, the nanotubes have abundant pores and multiple active sites, which shorten the ion diffusion length, decrease Na⁺ diffusion barriers, and increase the capacitance contribution ratio of the material at a high rate. Consequently, the anode shows a satisfactory initial capacity (582.5 mA h g^-1 at 0.5 A g^-1 ), a high-rate capability, and long cycling stability (1400 cycles, 398.6 mAh g^-1 at 10 A g^-1 , 90.5% capacity retention). Moreover, the sodiation process of NiTeSe-NiSe₂ double-walled nanotubes and underlying mechanism of the enhanced performance are revealed by in situ and ex situ transmission electron microscopy and theoretical calculations.

Rough Endoplasmic Reticulum Inspired Polystyrene-Brush-Based Superhigh Sulfur Content Cathodes Enable Lithium-Sulfur Cells with High Mass and Capacity Loading

The development of highly sophisticated biomimetic models is significant yet remains challenging in the electrochemical energy storage field. Lithium-sulfur (Li-S) cells with high sulfur content and high-sulfur-loading cathodes are urgently required to meet the fast-growing demand for electronic devices. Nevertheless, such cathode materials generally suffer from large sulfur agglomeration, nonporous structure, and insufficient conductivity, leading to rapid capacity decay and low sulfur utilization. Herein, inspired by rough endoplasmic reticulum, a 2D polystyrene (PS)-brush-based (G-g-PS) superhigh-sulfur-content (96 wt%) composite(G-g-sPS@S) is fabricated via the vulcanization reaction. The vulcanized PS side-chains and their S₈ composites on the nanosheet surface can efficiently provide sulfur species, and the intersheet interstitial pores can provide rapid mass-transfer channels for redox reactions of sulfur species. Furthermore, the highly sulfophilic vulcanized PS side-chains are able to effectively inhibit the shuttle effect of polysulfides and regulate their redox process. With these merits, the cells with G-g-sPS@S cathodes exhibit an ultralow decay rate of 0.02% per cycle over 400 cycles at 2 C and deliver a superior areal capacity of 12.6 mAh cm^-2 even with a high sulfur loading of 10.5 mg cm^-2 .

Interfacial-Catalysis-Enabled Layered and Inorganic-Rich SEI on Hard Carbon Anodes in Ester Electrolytes for Sodium-Ion Batteries

Constructing a homogenous and inorganic-rich solid electrolyte interface (SEI) can efficiently improve the overall sodium-storage performance of hard carbon (HC) anodes. However, the thick and heterogenous SEI derived from conventional ester electrolytes fails to meet the above requirements. Herein, an innovative interfacial catalysis mechanism is proposed to design a favorable SEI in ester electrolytes by reconstructing the surface functionality of HC, of which abundant CO (carbonyl) bonds are accurately and homogenously implanted. The CO (carbonyl) bonds act as active centers that controllably catalyze the preferential reduction of salts and directionally guide SEI growth to form a homogenous, layered, and inorganic-rich SEI. Therefore, excessive solvent decomposition is suppressed, and the interfacial Na⁺ transfer and structural stability of SEI on HC anodes are greatly promoted, contributing to a comprehensive enhancement in sodium-storage performance. The optimal anodes exhibit an outstanding reversible capacity (379.6 mAh g^-1 ), an ultrahigh initial Coulombic efficiency (93.2%), a largely improved rate capability, and an extremely stable cycling performance with a capacity decay rate of 0.0018% for 10 000 cycles at 5 A g^-1 . This work provides novel insights into smart regulation of interface chemistry to realize high-performance HC anodes for sodium storage.

Carbon-Hybridized Hydroxides for Energy Conversion and Storage: Interface Chemistry and Manufacturing

Carbon-hybridized hydroxides (CHHs) have been intensively investigated for uses in the energy conversion/storage fields. Nevertheless, the intrinsic structure-activity relationships between carbon and hydroxides within CHHs are still blurry, which hinders the fine modulation of CHHs in terms of practical applications to some degree. This review aims to figure out the intrinsic role of carbon materials in CHHs with a focus on the interface chemistry and the engineering strategy in-between two components. The fundamental effects of the carbon materials in enhancing the charge/mass transfer kinetics are first analyzed, particularly the extra electron pathways for fast charge transfer and the anchoring sites for boosting the mass transfer. Subsequently, the surface-guided/confined effects of carbon materials in CHHs to modify the morphology and tailor the hydroxides, and functional heterojunction for regulating the inner electronic structure are decoupled. The methods to efficiently construct a stable yet robust solid-solid heterointerface are summarized, including oxygen functional groups engrafting, topological defective sites construction and heteroatom incorporation to activate the inert carbon surface. The smart CHHs in some typical energy applications are demonstrated. Additionally, the methodologies that can reveal the hybridization electron configuration between two components are summed up. At last, the perspective and challenges faced by the CHHs for energy-related applications are outlined.

Uncovering the origin of the anomalously high capacity of a 3d anode via in situ magnetometry

Transition metals can deliver high lithium storage capacity, but the reason behind this remains elusive. Herein, the origin of this anomalous phenomenon is uncovered by in situ magnetometry taking metallic Co as a model system. It is revealed that the lithium storage in metallic Co undergoes a two-stage mechanism involving a spin-polarized electron injection to the 3d orbital of Co and subsequent electron transfer to the surrounding solid electrolyte interphase (SEI) at lower potentials. These effects create space charge zones for fast lithium storage on the electrode interface and boundaries with capacitive behavior. Therefore, the transition metal anode can enhance common intercalation or pseudocapacitive electrodes at high capacity while showing superior stability to existing conversion-type or alloying anodes. These findings pave the way for not only understanding the unusual lithium storage behavior of transition metals but also for engineering high-performance anodes with overall enhancement in capacity and long-term durability.

Rodlike FeS/SnS@N-C Core-Shell Microparticles for Lithium-Ion Batteries

FeS/SnS@N-C composites were successfully synthesized through the combination of nucleation self-assembly, N-doped carbon coating, and in situ vulcanization. The experimental results show that the discharge capacitance of FeS/SnS@N-C in the lithium storage process is 796.90 mAh g^-1 at 0.5 A g^-1 after 200 cycles, and more importantly, the discharge capacitance can maintain 278.84 mAh g^-1 at 5 A g^-1 after 2000 cycles. FeS in FeS/SnS@N-C plays a key role in the electrochemical performance, which is due to the certain electronic density of states (DOS) near the Fermi level. In short, our research expands the application of transition metal sulfide composites in lithium-ion batteries.

Metal Selenides Anode Materials for Sodium Ion Batteries: Synthesis, Modification, and Application

The powerful and rapid development of lithium-ion batteries (LIBs) in secondary batteries field makes lithium resources in short supply, leading to rising battery costs. Under the circumstances, sodium-ion batteries (SIBs) with low cost, inexhaustible sodium reserves, and analogous work principle to LIBs, have evolved as one of the most anticipated candidates for large-scale energy storage devices. Thereinto, the applicable electrode is a core element for the smooth development of SIBs. Among various anode materials, metal selenides (MSe_x ) with relatively high theoretical capacity and unique structures have aroused extensive interest. Regrettably, MSe_x suffers from large volume expansion and unwished side reactions, which result in poor electrochemistry performance. Thus, strategies such as carbon modification, structural design, voltage control as well as electrolyte and binder optimization are adopted to alleviate these issues. In this review, the synthesis methods and main reaction mechanisms of MSe_x are systematically summarized. Meanwhile, the major challenges of MSe_x and the corresponding available strategies are proposed. Furthermore, the recent research progress on layered and nonlayered MSe_x for application in SIBs is presented and discussed in detail. Finally, the future development focuses of MSe_x in the field of rechargeable ion batteries are highlighted.

Functional MXene-Based Materials for Next-Generation Rechargeable Batteries

MXenes are seen as an exceptional candidate to reshape the future of energy with their viable surface chemistry, ultrathin 2D structure, and excellent electronic conductivity. The extensive research efforts bring about rapid expansion of the MXene families with enriched functionalities, which significantly boost performance of the existing energy-storage devices. In this review, the strategies that are developed to functionalize the MXene-based materials, including tailoring their microstructure by ions/molecules/polymers-initiated interaction or self-assembly, surface/interface engineering with dopants or functional groups, constructing heterostructures from MXenes with various materials, and transforming them into a series of derivatives inheriting the merits of the MXene precursors are highlighted. Their applications in emerging battery technologies are demonstrated and discussed. With delicate functionalization and structural engineering, MXene-based electrode materials exhibit improved specific capacity and rate capability, and their presence further suppresses and even eliminates dendrite formation on the metal anodes, which lengthens the lifespan of the rechargeable batteries. Meanwhile, MXenes serve as additives for electrolytes, separators, and current collectors. Finally, some future directions worth of exploration to address the remaining challenging issues of MXene-based materials and achieve the next-generation high-power and low-cost rechargeable batteries are proposed.

Sulfur Encapsulation and Sulfur Doping Synergistically Enhance Sodium Ion Storage in Microporous Carbon Anodes

MOF-based materials are a class of efficient precursors for the preparation of heteroatom-doped porous carbon materials that have been widely applied as anode materials for Na-ion batteries. Thereinto, sulfur is often introduced to increase defects and act as an active species to directly react with sodium ions. Although the sulfur introduction and high surface area can synergistically improve capacity and rate capability, the initial Coulombic efficiency (ICE) and electrical conductivity of carbon material are inevitably reduced. Therefore, balancing sodium storage capacity and ICE is still the bottleneck faced by adsorbent carbon materials. Here, sulfur-encapsulated microporous carbon material with nitrogen, sulfur dual-doping (NSPC) is synthesized by postprocessing, achieving the reduced specific surface area by encapsulating sulfur in micropores, and the increased active sites by edge sulfur doping. The synergy between encapsulation and sulfur doping effectively balances specific capacity, rate capability, and ICE. The NSPC material exhibits capacities of 591.5 and 244.2 mAh g^-1 at 0.5 and at 10 A g^-1, respectively, and the ICE is as high as 72.3%. Moreover, the effect of nitrogen and sulfur on the improvement of electron/ion diffusion kinetics is resonantly demonstrated by density functional theory calculations. This synergistic preparation method may reveal a feasible thought for fabricating excellent-performance adsorption-type carbon materials for Na-ion batteries.

Structure Engineering of Vanadium Tetrasulfides for High-Capacity and High-Rate Sodium Storage

Structure engineering of electrode materials can significantly improve the life cycle and rate capability of the sodium-ion battery (SIB), yet remains a challenging task due to the lack of an effective synthetic strategy. Herein, the microstructure of VS₄ hollow spheres is successfully engineered through a facile hydrothermal method. The hollow VS₄ microspheres possess rich porosity and are covered with 2D ultrathin nanosheets on the surface. The finite element simulation (FES) reveals that such heterostructures can effectively relieve the stress induced by the sodiation and thereby enhance the structural integrity. The SIB with the hollow VS₄ microspheres as anode displays impressively high specific capacity, excellent stability upon ultra-long cycling, and extraordinary rate capacity, e.g., a reversible capacity of ≈378 mA h g^-1 at ultra-high 10 A g^-1 , while retaining 73.2% capacity after 1000 cycles. The Na storage mechanism is also elucidated through in situ/ex situ characterizations. Moreover, the hollow VS₄ microspheres demonstrate reliable rate performance at a low temperature of -40 °C (e.g., the capacity is ≈163 mA h g^-1 at 2 A g^-1 ). This work provides novel insights toward high-performance SIBs.

Interface engineering in NiSe2/Ni2Co/CoSe2 heterostructures encapsulated in hollow carbon shells for high-rate Li-Se batteries

The sluggish conversion reaction and the accompanying huge volume fluctuation greatly hinder the application of lithium-selenium (Li-Se) batteries. Therefore, reasonably constructing stable carbonaceous hosts with efficient electrochemically active sites is particularly essential for promoting the development of Se cathodes. Herein, a metal-organic solid derived carbon host with multiple heterogeneous NiSe₂/Ni₂Co/CoSe₂ interfaces was fabricated via in situ selenization. The formation of multiple heterointerfaces introduced subtle atomic array distortions, which provided additional electrochemically active sites compared with single heterointerfaces. Besides, the establishment of a built-in electric field was favorable for electron transfer and the absorption of Li⁺, thereby accelerating the reaction kinetics. Depending on the hollow structure and the heterogeneous catalysts, Li-Se batteries with NiSe₂/Ni₂Co/CoSe₂@Se cathodes delivered reversible capacities of 503 and 324 mA h g^-1 after 900 and 2200 cycles at 1 and 12 C, respectively. This work revealed the synergistic mechanism of multiple heterostructures composed of a Ni₂Co alloy and in situ derived bimetallic selenides for Se cathodes and provided new insights into the exploitation of energy storage materials.

Achieving Ultrahigh-Rate and Low-Temperature Sodium Storage of FePS3 via In Situ Construction of Graphitized Porous N-Doped Carbon

Sodium-ion batteries (SIBs) have become an important supplementation to lithium-ion batteries. Unfortunately, the low capacity and inferior low-temperature performance of traditional hard carbon led to limited energy density and a range of applications of SIBs. Herein, we present high-performance SIBs via embedding FePS₃ in graphitized porous N-doped carbon (FPS/GPNC) using coordination polymerization reaction. Such unique graphitized pores are in situ-constructed by the self-aggregation of Fe nanoparticles with high surface energy at high temperatures, which affords a three-dimensional open channel and a graphitized conductive network for fast transportation of Na⁺ and electrons. Moreover, an ingenious buffer barrier composed of graphitized pores is constructed for FePS₃ to withstand volume fluctuation during cycling. Consequently, a superior capacity of 354.2 mAh g^-1 is delivered even when the rate increases to 50 A g^-1. The impressing cycling lifespan up to 4700 cycles is achieved at 30 A g^-1 with excellent retention of 84.4%. Interestingly, the low-temperature performance (-20 °C) of FePS₃ is explored for the first time, and excellent stability (502.6 mAh g^-1 maintained after 100 cycles at 0.1 A g^-1) is obtained, indicating huge potential of practical application. This work provides insights into designing high-rate, high-capacity, and low-temperature SIBs.

MAX-phase Derived Tin Diselenide for 2D/2D Heterostructures with Ultralow Surface/Interface Transport Barriers toward Li-/Na-ions Storage

2D tin diselenide and its derived 2D heterostructures have delivered promising potentials in various applications ranging from electronics to energy storage devices. The major challenges associated with large-scale fabrication of SnSe₂ crystals, however, have hindered its engineering applications. Herein, a tin-extraction synthetic method is proposed for producing large-size SnSe₂ bulk crystals. In a typical synthesis, a Sn-containing MAX phase (V₂ SnC) and a Se source are heat-treated under a reducing atmosphere, by which Sn is extracted from the V₂ SnC phase as a rectified Sn source to form SnSe₂ crystals in the cold zone. After the following liquid exfoliation, the obtained 2D SnSe₂ nanosheets have a lateral size of a few centimeters and an atomic thickness. Furthermore, by coupling with 2D graphene to form 2D/2D SnSe₂ /graphene heterostructured electrodes, as validated by theoretical calculation and experimental studies, the superior Li-/Na-ion storage performance with ultralow surface/interface ion transport barriers are achieved for rechargeable Li-/Na-ion batteries. This innovative synthetic strategy opens a new avenue for the large-scale synthesis of selenides and offers more options into the practical application of emerging 2D/2D heterostructure for electrochemical energy storage.

A High-Energy and Safe Lithium Battery Enabled by Solid-State Redox Chemistry in a Fireproof Gel Electrolyte

Recent years have witnessed thriving efforts in pursuing high-energy batteries at an unaffordable cost of safety. Herein, a high-energy and safe quasi-solid-state lithium battery is proposed by solid-state redox chemistry of polymer-based molecular Li₂ S cathode in a fireproof gel electrolyte. This chemistry fully eliminates not only the negative effect of extremely reactive Li metal and oxygen species on cell safety but also the damage of electrode reversibility by soluble redox intermediates. The molecular Li₂ S cathode exhibits an exceptional lifetime of 2000 cycles, 100% Coulombic efficiency, high capacity of 830 mA h g^-1 with ultralow capacity loss of 0.005-0.01% per cycle and superior rate capability up to 10 C. Meanwhile, it shows high stability in the carbonate-involving electrolyte for maximizing the compatibility with carbonate-efficient Si anode. The optimized cell chemistry exerts high energy over 750 W h kg^-1 for 500 cycles with fast rate response, high-temperature adaptability, and no self-discharge. A fire-retardant composite gel electrolyte is developed to further strengthen the intrinsic safe redox between the Li₂ S cathode and the Si anode, which secures remarkable safety against extreme abuse of overheating, short circuits, and mechanical damage in air/water or even when on fire.

Recent Advancements in Chalcogenides for Electrochemical Energy Storage Applications

Energy storage has become increasingly important as a study area in recent decades. A growing number of academics are focusing their attention on developing and researching innovative materials for use in energy storage systems to promote sustainable development goals. This is due to the finite supply of traditional energy sources, such as oil, coal, and natural gas, and escalating regional tensions. Because of these issues, sustainable renewable energy sources have been touted as an alternative to nonrenewable fuels. Deployment of renewable energy sources requires efficient and reliable energy storage devices due to their intermittent nature. High-performance electrochemical energy storage technologies with high power and energy densities are heralded to be the next-generation storage devices. Transition metal chalcogenides (TMCs) have sparked interest among electrode materials because of their intriguing electrochemical properties. Researchers have revealed a variety of modifications to improve their electrochemical performance in energy storage. However, a stronger link between the type of change and the resulting electrochemical performance is still desired. This review examines the synthesis of chalcogenides for electrochemical energy storage devices, their limitations, and the importance of the modification method, followed by a detailed discussion of several modification procedures and how they have helped to improve their electrochemical performance. We also discussed chalcogenides and their composites in batteries and supercapacitors applications. Furthermore, this review discusses the subject’s current challenges as well as potential future opportunities.

An Open-Ended Ni3 S2 -Co9 S8 Heterostructures Nanocage Anode with Enhanced Reaction Kinetics for Superior Potassium-Ion Batteries

Sulfides are perceived as promising anode materials for potassium-ion batteries (PIBs) due to their high theoretical specific capacity and structural diversity. Nonetheless, the poor structural stability and sluggish kinetics of sulfides lead to unsatisfactory electrochemical performance. Herein, Ni₃ S₂ -Co₉ S₈ heterostructures with an open-ended nanocage structure wrapped by reduced graphene oxide (Ni-Co-S@rGO cages) are well designed as the anode for PIBs via a selective etching and one-step sulfuration approach. The hollow Ni-Co-S@rGO nanocages, with large surface area, abundant heterointerfaces, and unique open-ended nanocage structure, can reduce the K⁺ diffusion length and promote reaction kinetics. When used as the anode for PIBs, the Ni-Co-S@rGO exhibits high reversible capacity and low capacity degradation (0.0089% per cycle over 2000 cycles at 10 A g^-1 ). A potassium-ion full battery with a Ni-Co-S@rGO anode and Prussian blue cathode can display a superior reversible capacity of 400 mAh g^-1 after 300 cycles at 2 A g^-1 . The unique structural advantages and electrochemical reaction mechanisms of the Ni-Co-S@rGO are revealed by finite-element-simulation in situ characterizations. The universal synthesis technology of bimetallic sulfide anodes for advanced PIBs may provide vital guidance to design high-performance energy-storage materials.

Enabling Fast Na+ Transfer Kinetics in the Whole-Voltage-Region of Hard-Carbon Anodes for Ultrahigh-Rate Sodium Storage

Efficient electrode materials, that combine high power and high energy, are the crucial requisites of sodium-ion batteries (SIBs), which have unwrapped new possibilities in the areas of grid-scale energy storage. Hard carbons (HCs) are considered as the leading candidate anode materials for SIBs, however, the primary challenge of slow charge-transfer kinetics at the low potential region (<0.1 V) remains unresolved till date, and the underlying structure-performance correlation is under debate. Herein, ultrafast sodium storage in the whole-voltage-region (0.01-2 V), with the Na⁺ diffusion coefficient enhanced by 2 orders of magnitude (≈10^-7 cm² s^-1 ) through rationally deploying the physical parameters of HCs using a ZnO-assisted bulk etching strategy is reported. It is unveiled that the Na⁺ adsorption energy (E_a ) and diffusion barrier (E_b ) are in a positive and negative linear relationship with the carbon p-band center, respectively, and balance of E_a and E_b is critical in enhancing the charge-storage kinetics. The charge-storage mechanism in HCs is evidenced through comprehensive in(ex) situ techniques. The as prepared HCs microspheres deliver a record high rate performance of 107 mAh g^-1 @ 50 A g^-1 and unprecedented electrochemical performance at extremely low temperature (426 mAh g^-1 @ -40 °C).

Lithium reduction reaction for interfacial regulation of lithium metal anode

The lithium metal anode (LMA) is regarded as a very promising candidate for next-generation lithium batteries. The interfacial issue plays a pivotal role in affecting the lithium plating/stripping behavior, Coulombic efficiency and cycling lifespan of an LMA. The lithium reduction reaction (LRR) is an advanced regulating technique for optimizing the LMA interphase, which intelligently utilizes lithium metal itself as an interphase precursor. This strategy also possesses moderate operating conditions, high efficiency, great convenience and scalability. In this review, the latest developments of LRRs in interfacial regulation for LMAs are summarized, focusing on the interfacial regulation mechanism and the construction of various inorganic/organic interfaces in lithium metal liquid/solid batteries. The target interface properties and corresponding influence factors during LRRs are investigated in detail. Besides this, the superiority and insufficiency of LRRs are discussed and possible directions for LRRs are presented. This review highlights in situ modification characteristics for anode interface regulation during the LRR and can be extended to other metal anodes such as sodium, potassium and zinc.

A Substrate-Induced Fabrication of Active Free-Standing Nanocarbon Film as Air Cathode in Rechargeable Zinc-Air Batteries

Designing cost-effective and high-efficiency bifunctional electrocatalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) occurred at air electrodes is vitally significant yet challenging for Zn-air batteries (ZABs). In this work, a zinc substrate induced fabrication is reported of free-standing nanocarbon hybrid film which shows good bifunctional activity and can be directly used as the air electrode in the rechargeable ZABs. The designed nanocarbon film in Zn-air battery provides a satisfactory power density of 185 mW cm^-2 and cycling stability for 1200 h under the current density of 10 mA cm^-2 . This hybrid film also gives a solid-state ZAB excellent flexibility with a power density of 160 mW cm^-2 . The free-standing hybrid with abundant cobalt-nitrogen-carbon species coupled with porous architecture would be the original factor for its satisfactory performance of rechargeable ZABs. This work would pave an ideal way to design integrated electrode with high electrocatalytic performance towards electrochemical energy technologies.

Trimodal hierarchical porous carbon nanorods enable high-performance Na–Se batteries

Technical bottlenecks of polyselenide shuttling and material volume variation significantly hamper the development of emerging sodium–selenium (Na–Se) batteries. The nanopore structure of substrate materials is demonstrated to play a vital role in stabilizing Se cathodes and approaching superior Na-ion storage properties. Herein, an ideal nanorod-like trimodal hierarchical porous carbon (THPC) host is fabricated through a facile one-step carbonization method for advanced Na–Se batteries. The THPC possesses a trimodal nanopore structure encompassing micropores, mesopores, and macropores, and functions as a good accommodator of Se molecules, a reservoir of polyselenide intermediates, a buffer for volume expansion of Se species during sodiation, and a promoter for electron/ion transfer in the electrochemical process. As a result, Na–Se batteries assembled with the Se–THPC composite cathode realize high utilization of Se, fast redox kinetics, and excellent cyclability. Furthermore, the Na-ion storage mechanism of the well-designed Se–THPC composite is profoundly revealed by in situ visual characterization techniques.

Technical bottlenecks of polyselenide shuttling and material volume variation significantly hamper the development of emerging sodium–selenium (Na–Se) batteries.

Interface-Driven Pseudocapacitance Endowing Sandwiched CoSe2/N-Doped Carbon/TiO2 Microcubes with Ultra-Stable Sodium Storage and Long-Term Cycling Stability

Cobalt diselenide (CoSe₂) has drawn great concern as an anode material for sodium-ion batteries due to its considerable theoretical capacity. Nevertheless, the poor cycling stability and rate performance still impede its practical implantation. Here, CoSe₂/nitrogen-doped carbon-skeleton hybrid microcubes with a TiO₂ layer (denoted as TNC-CoSe₂) are favorably prepared via a facile template-engaged strategy, in which a TiO₂-coated Prussian blue analogue of Co₃[Co(CN)₆]₂ is used as a new precursor accompanied with a selenization procedure. Such structures can concurrently boost ion and electron diffusion kinetics and inhibit the structural degradation during cycling through the close contact between the TiO₂ layer and NC-CoSe₂. Besides, this hybrid structure promotes the superior Na-ion intercalation pseudocapacitance due to the well-designed interfaces. The as-prepared TNC-CoSe₂ microcubes exhibit a superior cycling capability (511 mA h g^-1 at 0.2 A g^-1 after 200 cycles) and long cycling life (456 mA h g^-1 at 6.4 A g^-1 for 6000 cycles with a retention of 92.7%). Coupled with a sodium vanadium fluorophosphate (Na₃V₂(PO₄)₂F₃)@C cathode, this assembled full cell displays a specific capacity of 281 mA h g^-1 at 0.2 A g^-1 for 100 cycles. This work can be potentially used to improve other metal selenide-based anodes for rechargeable batteries.

Controllable Doping in 2D Layered Materials

For each generation of semiconductors, the issue of doping techniques is always placed at the top of the priority list since it determines whether a material can be used in the electronic and optoelectronic industry or not. When it comes to 2D materials, significant challenges have been found in controllably doping 2D semiconductors into p- or n-type, let alone developing a continuous control of this process. Here, a unique self-modulated doping characteristic in 2D layered materials such as PtSSe, PtS_0.8 Se_1.2 , PdSe₂ , and WSe₂ is reported. The varying number of vertically stacked-monolayers is the critical factor for controllably tuning the same material from p-type to intrinsic, and to n-type doping. Importantly, it is found that the thickness-induced lattice deformation makes defects in PtSSe transit from Pt vacancies to anion vacancies based on dynamic and thermodynamic analyses, which leads to p- and n-type conductance, respectively. By thickness-modulated doping, WSe₂ diode exhibits a high rectification ratio of 4400 and a large open-circuit voltage of 0.38 V. Meanwhile, the PtSSe detector overcomes the shortcoming of large dark-current in narrow-bandgap optoelectronic devices. All these findings provide a brand-new perspective for fundamental scientific studies and applications.