Interfacial Microenvironment Modulation Enhancing Catalytic Kinetics of Binary Metal Sulfides Heterostructures for Advanced Water Splitting Electrocatalysts

Interfacial electronic modulation of NiCo decorated nano-flowered MoS2 on carbonized wood as a remarkable bifunctional electrocatalyst for boosting overall water splitting

The development of a cost-effective and efficient bifunctional electrode for overall water splitting holds significant importance in accelerating the sustainable advancement of hydrogen energy. The present study involved a bifunctional catalytic electrode was prepared by loading NiCo-modified 1T/2H MoS2 onto carbonized wood (NiCo-MoS2-CW) using the hydrothermal and electrodeposition techniques. The XPS analysis revealed that NiCo-modified MoS2 exhibited a weak electron characteristic, which facilitated the ionization of H2O and significantly enhanced the Volmer step. The XPS analysis unveiled that NiCo-modified MoS2 displayed a weak electron characteristic, thereby promoting the ionization of H2O and substantially augmenting the Volmer step. The electrocatalytic performance of the NiCo-MoS2-CW in 1.0 M KOH is remarkably impressive, exhibiting minimal overpotentials of only 64 mV (10 mA cm-2) and 216 mV (50 mA cm-2) for the hydrogen evolution reaction and oxygen evolution reaction, respectively. The NiCo-MoS2-CW || NiCo-MoS2-CW electrolytic cell can achieve a cell voltage of only 1.69 V to achieve a current density of 50 mA cm-2. Overall, this study proposes a potential approach to improve the catalytic efficiency of overall water splitting by modulating the interfacial electronic properties of MoS2.

Synthesis and Electrocatalytic Applications of Layer-Structured Metal Chalcogenides Composites

Featured with the attractive properties such as large surface area, unique atomic layer thickness, excellent electronic conductivity, and superior catalytic activity, layered metal chalcogenides (LMCs) have received considerable research attention in electrocatalytic applications. In this review, the approaches developed to synthesize LMCs-based electrocatalysts are summarized. Recent progress in LMCs-based composites for electrochemical energy conversion applications including oxygen reduction reaction, carbon dioxide reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, overall water splitting, and nitrogen reduction reaction is reviewed, and the potential opportunities and practical obstacles for the development of LMCs-based composites as high-performing active substances for electrocatalytic applications are also discussed. This review may provide an inspiring guidance for developing high-performance LMCs for electrochemical energy conversion applications.

Interfacial Micro-Environment of Electrocatalysis and Its Applications for Organic Electro-Oxidation Reaction

Conventional designing principal of electrocatalyst is focused on the electronic structure tuning, on which effectively promotes the electrocatalysis. However, as a typical kind of electrode-electrolyte interface reaction, the electrocatalysis performance is also closely dependent on the electrocatalyst interfacial micro-environment (IME), including pH, reactant concentration, electric field, surface geometry structure, hydrophilicity/hydrophobicity, etc. Recently, organic electro-oxidation reaction (OEOR), which simultaneously reduces the anodic polarization potential and produces value-added chemicals, has emerged as a competitive alternative to oxygen evolution reaction, and the role IME played in OEOR is receiving great interest. Thus, this article provides a timely review on IME and its applications toward OEOR. In this review, the IME for conventional gas-involving reactions, as a contrast, is first presented, and then the recent progresses of IME toward diverse typical OEOR are summarized; especially, some representative works are thoroughly discussed. Additionally, cutting-edge analytical methods and characterization techniques are introduced to comprehensively understand the role IME played in OEOR. In the last section, perspectives and challenges of IME regulation for OEOR are shared.

Stabilization of transition metal heterojunctions inside porous materials for high-performance catalysis

Transition metal-based heterostructural materials are a class of very promising substitutes for noble metal-based catalysts for high-performance catalysis, due to their inherent internal electric field at the interface in the heterojunctions, which could induce electron relocalization and facilitate charge carrier migration between different metal sites at heterostructural boundaries. However, redox-active metal species suffer from reduction, oxidation, migration, aggregation, leaching and poisoning in catalysis, which results in heavy deterioration of the catalytic properties of transition metal-based heterojunctions and frustrates their practical applications. To improve the stability of transition metal-based heterojunctions and sufficiently expose redox-active sites at the heterosurfaces, many kinds of porous materials have been used as porous hosts for the stabilization of non-precious metal heterojunctions. This review article will discuss recently developed strategies for encapsulation and stabilization of transition metal heterojunctions inside porous materials, and highlight their improved stability and catalytic performance through the spatial confinement effect and synergistic interaction between the heterojunctions and the host matrices.

Hydrogen-Bond Regulation of the Microenvironment of Ni(II)-Porphyrin Bifunctional Electrocatalysts for Efficient Overall Water Splitting

Accurately regulating the microenvironment around active sites is an important approach for boosting the overall water splitting performance of bifunctional electrocatalysts, which can drive both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) in the same electrolyte. Herein, pseudo-pyridine-substituted Ni(II)-porphyrins (o-NiTPyP, m-NiTPyP, and p-NiTPyP) with pseudo-pyridine N-atoms located at the ortho-, meta-, or para-position are prepared and used as model catalysts for alkaline water splitting. Experimental and theoretical results reveal that the pseudo-pyridine N-atom positions can regulate the microenvironment around the active sites and the adsorption free energy of H-donating substances by affecting the H-bonding interaction and the NNiN bond angles of active sites, and thus those pseudo-pyridine-substituted Ni(II)-porphyrins deliver better electrocatalytic activity than the Ni(II)-tetraphenylporphyrin (NiTPP) without pseudo-pyridine N-atoms. Among them, m-NiTPyP on carbon nanotubes delivers the lowest overpotentials of 267 and 138 mV at 10 mA cm^-2 for the OER and HER, respectively. Specifically, m-NiTPyP as bifunctional electrocatalyst in an alkaline electrolyzer requires only 1.62 V to drive efficient overall water splitting at 10 mA cm^-2 while remaining durable. This work proposes a new H-bond-regulating approach of the microenvironment of electrocatalysts for effectively boosting the overall water splitting activity and deeply understanding its related mechanism.

Synergistic Tuning of CoO/CoP Heterojunction Nanowire Arrays as Efficient Bifunctional Catalysts for Alkaline Overall Water Splitting

Bifunctional electrocatalysts with superior activity and durability are of great importance for electrocatalytic water splitting. Herein, hierarchical structured CoO/CoP heterojunctions are successfully designed as highly efficient and freestanding bifunctional electrocatalysts toward overall water splitting. The unique microstructure combining two-dimensional nanosheets with one-dimensional nanowires enables numerous exposed active sites, shortened ion-diffusion pathways, and enhanced conductivity, significantly improving performance. Such freestanding electrodes achieve high current density over 400 mA cm^-2 at low overpotentials and have exceptional electrocatalytic activity as well as long-term durability for both hydrogen and oxygen evolution reactions under alkaline conditions. Remarkably, a high current density of 20 mA cm^-2 is generated at a low cell voltage of 1.56 V in an alkaline water electrolyzer, originating from synergistic interactions between CoO and CoP exposing active sites and facilitating charge transfer and enhancing kinetics. This work provides new insight into designing low-cost but high-performance bifunctional electrocatalysts for practical water splitting.

Introducing non-bridging ligand in metal-organic framework-based electrocatalyst enabling reinforced oxygen evolution in seawater

Using seawater as the replacement of freshwater for electrolysis, with the integration of renewable energy, is deemed as an attractive manner to harvest green hydrogen. However, the complexity of seawater puts forward stricter requirement to the electrocatalyst to alleviate the chlorine electrochemistry and corrosion. Herein, a nanosheet array of NiFe-MOF@Ni₂P/Ni(OH)₂ is devised by partially substituting terephthalic acid (H₂BDC) ligand by ferrocenecarboxylic acid (FcCA). Tailoring the active site into an under-coordinated fashion affords NiFe-MOF@Ni₂P/Ni(OH)₂ excellent performance towards oxygen evolution reaction (OER), only requiring the overpotentials of 302 mV and 394 mV in alkaline seawater to drive the current densities of 100 and 1000 mA cm^-2, respectively. Moreover, the as-obtained electrocatalyst showed robust durability for operating more than 120 h at 500 mA cm^-2 under harsh condition (6 M KOH + 1.5 M NaCl, 60 ℃). Density functional theory (DFT) calculations confirmed that tuning the coordination environment of Ni in NiFe-MOF by incorporating the non-bridging FcCA ligands could boost the formation of more active catalytic sites, which can simultaneously enhance the electronic conductivity and accelerate OER kinetics. This work provides beneficial enlightenment of combining MOF-based electrocatalyst with direct electrolysis of seawater.

Corrosion Chemistry of Electrocatalysts

Electrocatalysts are the core components of many sustainable energy conversion technologies that are considered the most potential solution to the worldwide energy and environmental crises. The reliability of structure and composition pledges that electrocatalysts can achieve predictable and stable performance. However, during the electrochemical reaction, electrocatalysts are influenced directly by the applied potential, the electrolyte, and the adsorption/desorption of reactive species, triggering structural and compositional corrosion, which directly affects the catalytic behaviors of electrocatalysts (performance degradation or enhancement) and invalidates the established structure-activity relationship. Therefore, it is necessary to elucidate the corrosion behavior and mechanism of electrocatalysts to formulate targeted corrosion-resistant strategies or use corrosion reconstruction synthesis techniques to guide the preparation of efficient and stable electrocatalysts. Herein, the most recent developments in electrocatalyst corrosion chemistry are outlined, including corrosion mechanisms, mitigation strategies, and corrosion syntheses/reconstructions based on typical materials and important electrocatalytic reactions. Finally, potential opportunities and challenges are also proposed to foresee the possible development in this field. It is believed that this contribution will raise more awareness regarding nanomaterial corrosion chemistry in energy technologies and beyond.

Cu2S Nanoflakes Decorated with NiS Nanoneedles for Enhanced Oxygen Evolution Activity

Metal sulfides are considered excellent materials for oxygen evolution reaction because of their excellent conductivity and high electrocatalytic activity. In this report, the NiS-Cu₂S composites were prepared on copper foam (NiS-Cu₂S-CF) using a facile synthetic strategy. The scanning electron microscopy results confirmed that the NiS nanoneedles were successfully grown on Cu₂S nanoflakes, greatly increasing the active sites. Particularly, the optimized 15% NiS-Cu₂S-CF composite demonstrated excellent oxygen evolution activity with a small overpotential of 308 mV@20 mA cm⁻², which is significantly smaller than that of noble metal-based electrocatalysts and other NiS-Cu₂S-CF composites. The enhanced oxygen evolution activity is attributed to the unique morphology that can provide ample active sites, rich ion-transfer pathways, and the synergistic effect between NiS and Cu₂S, which can boost the electron transfer rate.

Electronic modulation of cobalt phosphide by lanthanum doping for efficient overall water splitting in alkaline media

The La-doping regulates the electronic structure of CoP, promoting its HER and OER activities. A La–CoP-based water electrolyzer requires a cell voltage of 1.608 V at 10 mA cm−2 in alkaline media, which outperforms a noble metal-based electrolyzer.