Effect of sulfuric acid hydrolysis on the structure and Pickering emulsifying capacity of acorn starch

The acid-hydrolyzed acorn starch samples (HAS-1, HAS-2, HAS-3, and HAS-4) were prepared from natural acorn starch (NAS) at sulfuric acid concentrations of 1, 2, 3, and 4 mol/L for 2 d. The particle characteristics and structures of HAS were investigated, and Pickering high internal phase emulsions (HIPEs) based on HAS were constructed and characterized. The results showed that with an increase in sulfuric acid concentration, the size, yield, amylose content, molecular weight, and amylopectin chain length of HAS gradually decreased. HAS retained an A-type crystal structure, and its relative crystallinity and short-range order degree gradually increased with increasing sulfuric acid concentration. Acid hydrolysis treatment improved the wettability of NAS, and its effect was positively correlated with the sulfuric acid concentration. HAS-3 and HAS-4 could stabilize the Pickering HIPEs with an oil phase volume fraction of 80% at c ≥ 1.5%. The mechanical properties of the HIPEs were positively correlated with c.

Preparation and Application of High Internal Phase Pickering Emulsion Gels Stabilized by Starch Nanocrystal/Tannic Acid Complex Particles

Herein, the starch nanocrystal/tannic acid (ST) complex particles, which were prepared based on the hydrogen bond between starch nanocrystal (SNC) and tannic acid (TA), were successfully used to stabilize the HIPPE gels. The optimal TA concentration of the ST complex particles resulted in better water dispersibility, surface wettability, and interfacial activity as compared to SNC. The hydrogen bond responsible for the formation of ST complex particles and subsequent stable emulsions was demonstrated by varying the pH and ionic strength of the aqueous phase. Notably, the HIPPE gels stabilized via the ST complex particles can maintain long-term stability for up to three months. The HIPPEs stabilized via the ST complex particles all displayed gel-like features and had smaller droplets and denser droplet networks than the SNC-stabilized HIPPEs. The rheological behavior of HIPPE gels stabilized via the ST complex particles can be readily changed by tuning the mass ratio of SNC and TA as well as pH. Finally, the prepared HIPPE gels used to effectively protect encapsulated β-carotene against high temperatures and ultraviolet radiation and its controllable release at room temperature were demonstrated. It is anticipated that the aforementioned findings will provide new perspectives on the preparation of Pickering emulsion for delivery systems.

Pickering emulsions stabilized by starch nanocrystals prepared from various crystalline starches by ultrasonic assisted acetic acid: Stability and delivery of curcumin

Ultrasonic assisted acetic acid hydrolysis was applied to prepare starch nanocrystals (SNCs) from native starches with different crystalline structures (A, B, and C types). The structure properties, morphology, Pickering emulsion stability and curcumin deliver capacity of both SNCs and native starches were investigated and compared. Compared with native starches, SNCs showed smaller size and higher crystallinity. The size of SNCs varied with different crystalline types, with C-type starch exhibiting the smallest SNCs (107.4 nm), followed by A-type (113.8 nm), and B-type displaying the largest particle size (149.0 nm). SNCs-Pickering emulsion showed enhanced stability with smaller emulsion droplets, higher static stability, and denser oil/water interface. SNCs-Pickering emulsions displayed higher curcumin loading efficiency (53.53 %-61.41 %) compared with native starch-Pickering emulsions (13.93 %-19.73 %). During in vitro digestion, SNCs-Pickering emulsions proved to be more proficient in protecting and prolonging the biological activity of curcumin due to their smaller size and better interfacial properties. These findings demonstrated the potential of SNCs for application in Pickering emulsion and delivery of bioactive components.

A new sight separation for collecting starch nanocrystals with small size and high crystallinity based on the hydrolysis mechanism

To prevent starch nanocrystals (SNCs) that are generated at an early stage from being hydrolyzed excessively, this study proposed a new separation method, named "neutral dispersion and acidic precipitation." SNCs were prepared from waxy potato starch by sulfuric acid hydrolysis. Based on the results of kinetics and molecular weight, the hydrolysis was divided into three stages, e.g., rapid (initial 1 day), medium (subsequent 1 day) and slow stage (2-5 days). The rapid and medium stages were related to the degradation of amorphous region in starch, and the slow stage mainly referred to SNC release. Therefore, the method was developed to separate SNCs at the slow stage. After centrifugation at 6000 rpm, large particles were removed from the SNC suspension under pH 7. The SNCs with small average size and crystallite size, high relative crystallinity (RC), and high dispersion stability in the supernatant were retained and were then precipitated entirely under pH 5, because pH 5 led to the reduction of dispersion stability of SNCs. Meanwhile, the hydrothermal and dry-thermal stability of separated SNCs were significantly promoted. The separation method has the potential in SNC preparation for increasing the yield and collecting products with small size and high RC.

Physicochemical properties of ultrasound-pretreated pea starch and its inclusion complexes with lauric acid

Ultrasound is a promising green technology for modifying starch. The influence of ultrasound pretreatment (UPT) at diverse temperatures on the morphology and molecular structure of pea starch and its ability to form inclusion complexes with lipids were investigated. After UPT at each temperature, the starch granules retained an unchanged crystalline structure but exhibited notable changes in short-range molecular order and molecular structure. In comparison with the samples treated at 0 and 20 °C, pea starch subjected to UPT at 40 °C had a significantly (P ≤ 0.05) higher complexing index with lauric acid (LA) and the starch-LA inclusion complex exhibited a higher enthalpy change, relative crystallinity, and resistant starch content. These differences were attributed to the higher temperature causing changes in the disruption points of starch chains and an enlargement in the molecular weight of linear chains. These results may promote the utilization of ultrasound for effective starch modification.

Impact of long-term ultrasound treatment on structural and physicochemical properties of starches differing in granule size

Granule size is a critical parameter affecting starch processing properties. Ultrasound treatments of up to 22 h were applied on two starches differing in granule size (quinoa starch and maize starch). The two starches showed significantly different trends in both structural and physicochemical aspects affected by the ultrasound treatments. For the small granule starch (volume-weighted mean particle size of 1.79 μm), short-term ultrasonication caused an increase of swelling power. As the treatment time increased, the physicochemical properties were influenced by the degradation of amylopectin external chains. The X-ray diffraction results showed a decrease of relative crystallinity and changes of peak areas with long-term treatment. On the other hand, a balance between amylose leaching and surface damages was seen for the large granule starch (volume-weighted mean particle size of 18.3 μm). The effect of ultrasound modification on starches with different molecular and granular structures was discussed. A possible mechanism of the ultrasound effect was proposed.

Recent preparation, modification and application progress of starch nanocrystals: A review

Due to the advantages of wide sources, high biocompatibility and favorable biodegradability, starch nanocrystals (SNCs) have gradually attracted attention and have bright development prospects in food, agriculture, materials, medicine and other fields. However, the traditional preparation method of SNCs is time-consuming and inefficient, and the physicochemical properties cannot fully meet the needs of multiple applications. Fortunately, the unique onion-like structure of starch granules and the large number of hydroxyl groups present on the surface entitle SNCs to efficient preparation and modification. This paper comprehensively reviewed the improvement methods of SNCs preparation process in recent years, and the advantages and disadvantages of the two improvement strategies were compared. Besides, the importance of introducing different pretreatment methods into the SNCs preparation process was emphasized. It also focused on the different modification treatment and application progress of SNCs, especially in the starch-based surface coating of fruits and vegetables. The information will contribute to further improve the preparation efficiency and physicochemical properties of SNCs, and ultimately expand the application field.

Relation between Conventional and Starch-Assisted ASP Injection and Impact of Crystallinity on Flood Formation

Alkaline-surfactant-polymer (ASP) flooding, a recognized method for oil recovery, encounters limited use due to its expense. In addition, ASP's best composition and injection sequence still remains uncertain today. This study explores conventional ASP flooding using PT SPR Langgak's special surfactants, simulating Langgak oilfield conditions in Sumatra, Indonesia. By comparing the outcomes of this flooding technique with that of starch-assisted ASP performed in another study, the benefits of adding starch nanoparticles to flooding are evident. Nano-starch ASP increased oil recovery by 18.37%, 10.76%, and 10.37% for the three configurations investigated in this study. Water flooding preceded ASP flooding, and flooding operations were carried out at 60 °C. This study employed sodium hydroxide (NaOH), sodium carbonate (Na2CO3), and specialized surfactants from PT SPR. The adopted polymer is solely hydrolyzed polyacrylamide (HPAM) at 2000 ppm. Starch nanoparticles underwent comprehensive characterization and focused more on charge stability. Purple yam nanoparticles (PYNPs) exhibited remarkable stability at -36.33 mV, unlike cassava starch nanoparticles (CSNPs') at -10.68 mV and HPAM's at -27.13 mV. Surface properties affect interactions with fluids and rocks. Crystallinity, a crucial characterization, was assessed using Origin software 2019b. CSNPs showed 24.15% crystallinity, surpassing PYNPs' 20.68%. Higher crystallinity benefits CSNPs' thermal stability. The amorphous behavior found in PYNPs makes them less suitable if applied in harsh reservoirs. This research correlated with prior findings, reinforcing starch nanoparticles' role in enhancing oil recovery. In summary, this study highlighted conventional ASP flooding using HPAM as the sole polymer and compared it with three formations that used two starch nanoparticles included with HPAM, assessing their impact on charge stability, crystallinity, and recovery rate to emphasize their importance in the oil recovery industry. Starch nanoparticles' benefits and limitations guided further investigation in this study.

Influence of pre- or post-electron beam irradiation on heat-moisture treated maize starch for multiscale structure, physicochemical properties and digestibility

Electron beam irradiation (EBI) as a green technological method for starch modification can generate starch-based materials with new functions. This study modified maize starch by heat-moisture treatment (HMT) for 1 h and 3 h, and EBI with various intensities (5 kGy and 10 kGy), and their effects of treatment sequence on the multiscale structure, physicochemical properties and in vitro digestibility were investigated. EBI or HMT alone did not change the granule morphology and crystalline type, but reduced the crystallinity and molecular weight and increased the resistant starch content. HMT alone had no significant effect on the solubility of starch, while EBI led to a considerable increase in the solubility of maize starch. The combined treatment of EBI and HMT aggravated apparent viscosity reduction, and the HMT starch pretreated with EBI had a smaller molecular weight and lower viscosity. In contrast, post-EBI samples had higher solubility and RS content. Primarily, it has excellent potential for producing low-viscosity and high-solubility starch foods.

Starch Modification with Molecular Transformation, Physicochemical Characteristics, and Industrial Usability: A State-of-the-Art Review

Starch is a readily available and abundant source of biological raw materials and is widely used in the food, medical, and textile industries. However, native starch with insufficient functionality limits its utilization in the above applications; therefore, it is modified through various physical, chemical, enzymatic, genetic and multiple modifications. This review summarized the relationship between structural changes and functional properties of starch subjected to different modified methods, including hydrothermal treatment, microwave, pre-gelatinization, ball milling, ultrasonication, radiation, high hydrostatic pressure, supercritical CO₂, oxidation, etherification, esterification, acid hydrolysis, enzymatic modification, genetic modification, and their combined modifications. A better understanding of these features has the potential to lead to starch-based products with targeted structures and optimized properties for specific applications.

Formation mechanism of starch nanocrystals from waxy rice starch and their separation by differential centrifugation

Starch nanocrystals (SNCs) were prepared from waxy rice starch via sulfuric acid hydrolysis. The objective focused on the following: i) the hydrolysis kinetics and structural properties of SNCs; ii) the effects of differential centrifugation on the yield and size distribution of SNCs. The hydrolysis was divided into a rapid hydrolysis stage in the initial two days and a slow hydrolysis stage after two days. During the two-day hydrolysis, the average diameter of SNCs reached 244 nm. After two days of hydrolysis, the degree of crystallinity, crystallite size, and melting temperature and enthalpy increased. The proportion of A-branched chains decreased, whereas the proportion of B1-branched chains and molecular weight did not change considerably. Thus, the reaction in the slow hydrolysis stage could be considered as the surface modification and gradual release of SNCs. Furthermore, SNCs with a small size and high charge density could be used for differential centrifugation.

The alterations in granule, shell, blocklets, and molecular structure of pea starch induced by ultrasound

Understanding the alterations to starch multi-scale structure induced by ultrasound treatment can help in determining the effective application of ultrasound in functional-starch preparation. This study aimed to comprehensively characterize and understand the morphological, shell, lamellae, and molecular structures of pea starch granules treated by ultrasound under different temperatures. Scanning electron microscopy and X-ray diffraction analyses showed that UT (ultrasound treatment) did not change C-type of crystalline, but caused a pitted surface and endowed a looser structure and higher enzyme susceptibility as the temperature increased above 35 °C for pea starch granules. Fourier transform infrared spectroscopy and small-angle X-ray scattering analyses revealed that UT reduced the short-range ordering and increased the thickness of semi-crystalline and amorphous lamellae by inducing starch chain depolymerization, which was manifested by molecule weight and chain length distribution analysis. The sample ultrasound-treated at 45 °C had the higher proportion of B2 chains compared with the other ultrasound-treated samples because the higher ultrasonic temperature altered the disruption sites of starch chains.

The role and mechanism of electron beam irradiation in glutaric anhydride esterified proso millet starch: Multi-scale structure and physicochemical properties

To investigate the effect of electron beam irradiation (EBI) pretreatment on the multiscale structure and physicochemical properties of esterified starch, this study used EBI pretreatment to prepare glutaric anhydride (GA) esterified proso millet starch. GA starch did not show the corresponding distinct thermodynamics peaks. However, it had a high pasting viscosity and transparency (57.46-74.25 %). EBI pretreatment increased the degree of glutaric acid esterification (0.0284-0.0560) and changed its structure and physicochemical properties. EBI pretreatment disrupted its short-range ordering structure, reducing the crystallinity, molecular weight and pasting viscosity of glutaric acid esterified starch. Moreover, it produced more short chains and increased the transparency (84.28-93.11 %) of glutaric acid esterified starch. This study could offer a rationale for using EBI pretreatment technology to maximize the functional properties of GA modified starch and enlarge its implementation in modified starch.

Enhancing Oil Recovery by Polymeric Flooding with Purple Yam and Cassava Nanoparticles

Significant amounts of oil remain in the reservoir after primary and secondary operations, and to recover the remaining oil, enhanced oil recovery (EOR) can be applied as one of the feasible options remaining nowadays. In this study, new nano-polymeric materials have been prepared from purple yam and cassava starches. The yield of purple yam nanoparticles (PYNPs) was 85%, and that of cassava nanoparticles (CSNPs) was 90.53%. Synthesized materials were characterized through particle size distribution (PSA), Zeta potential distribution, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). The performance of PYNPs in recovering oil was better than CSNPs, as found from the recovery experiments. Zeta potential distribution results confirmed the stability of PYNPs over CSNPs (-36.3 mV for PYNPs and -10.7 mV for CSNPs). The optimum concentration for these nanoparticles has been found from interfacial tension measurements and rheological properties, and it was 0.60 wt.% for PYNPs and 0.80 wt.% for CSNPs. A more incremental recovery (33.46%) was achieved for the polymer that contained PYNPs in comparison to the other nano-polymer (31.3%). This paves the way for a new technology for polymer flooding that may replace the conventional method, which depends on partially hydrolyzed polyacrylamide (HPAM).

Structural Properties of Lotus Seed Starch Nanocrystals Prepared Using Ultrasonic-Assisted Acid Hydrolysis

This study provides a novel method of preparing lotus seed starch nanocrystals (LS-SNCs) using acid hydrolysis combined with ultrasonic-assisted acid hydrolysis (U-LS-SNCs) and evaluates the structural characteristics of starch nanocrystals using scanning electron microscopy; analysis of particle size, molecular weight, and X-ray diffraction patterns; and FT-IR spectroscopy. The results showed that the preparation time of U-LS-SNCs could be reduced to 2 days less than that for LS-SNCs. The smallest particle size and molecular weight were obtained after a 30 min treatment with 200 W of ultrasonic power and 5 days of acid hydrolysis. The particle size was 147 nm, the weight-average molecular weight was 3.42 × 10⁴ Da, and the number-average molecular weight was 1.59 × 10⁴ Da. When the applied ultrasonic power was 150 W for 30 min and acid hydrolysis was applied for 3 days, the highest relative crystallinity of the starch nanocrystals was 52.8%. The modified nanocrystals can be more widely used in various applications such as food-packaging materials, fillers, pharmaceuticals, etc.

Polysaccharides, proteins, and their complex as microencapsulation carriers for delivery of probiotics: A review on carrier types and encapsulation techniques

Probiotics provide several benefits for humans, including restoring the balance of gut bacteria, boosting the immune system, and aiding in the management of certain conditions such as irritable bowel syndrome and lactose intolerance. However, the viability of probiotics may undergo a significant reduction during food storage and gastrointestinal transit, potentially hindering the realization of their health benefits. Microencapsulation techniques have been recognized as an effective way to improve the stability of probiotics during processing and storage and allow for their localization and slow release in intestine. Although, numerous techniques have been employed for the encapsulation of probiotics, the encapsulation techniques itself and carrier types are the main factors affecting the encapsulate effect. This work summarizes the applications of commonly used polysaccharides (alginate, starch, and chitosan), proteins (whey protein isolate, soy protein isolate, and zein) and its complex as the probiotics encapsulation materials; evaluates the evolutions in microencapsulation technologies and coating materials for probiotics, discusses their benefits and limitations, and provides directions for future research to improve targeted release of beneficial additives as well as microencapsulation techniques. This study provides a comprehensive reference for current knowledge pertaining to microencapsulation in probiotics processing and suggestions for best practices gleaned from the literature.

Starch Nanoparticles: Preparation, Properties and Applications

Starch as a natural polymer is abundant and widely used in various industries around the world. In general, the preparation methods for starch nanoparticles (SNPs) can be classified into 'top-down' and 'bottom-up' methods. SNPs can be produced in smaller sizes and used to improve the functional properties of starch. Thus, they are considered for the various opportunities to improve the quality of product development with starch. This literature study presents information and reviews regarding SNPs, their general preparation methods, characteristics of the resulting SNPs and their applications, especially in food systems, such as Pickering emulsion, bioplastic filler, antimicrobial agent, fat replacer and encapsulating agent. The aspects related to the properties of SNPs and information on the extent of their utilisation are reviewed in this study. The findings can be utilised and encouraged by other researchers to develop and expand the applications of SNPs.

Pasting and Rheological Properties of Starch Paste/Gels in a Sugar-Acid System

This study was to investigate the impact of granule size, amylose content, and starch molecular characteristics on pasting and rheological properties of starch paste/gels in neutral (water) and sugar-acid systems. Normal rice starch (RS), waxy rice starch (WRS), normal tapioca starch (TS), and waxy tapioca starch (WTS) representing small-granule starches and intermediate-granule starches respectively, were used in the study. Impacts of granule size, AM content, and their synergistic effects resulted in different starch susceptibility to acid hydrolysis and interactions between starch and sucrose-water, yielding different paste viscosities in both systems. The high molecular weight (Mw¯) and linearity of amylopectin and amylose molecules increased the consistency of starch pastes. RS produced a stronger and more brittle gel than other starch gels in both neutral and sugar-acid systems. The results indicated the impact of the effect of granule size and amylose content on starch gel behaviors. Properties of waxy starch gels were mainly governed by amylopectin molecular characteristics, especially in the sugar-acid system. Adding sugar and acid had minor impacts on starch gel behaviors in the linear viscoelastic (LVE) region but were most evident in the nonlinear response regime of starch gels as shown in the Lissajous curves at large oscillatory strain.

A Comprehensive Study on Starch Nanoparticle Potential as a Reinforcing Material in Bioplastic

Starch can be found in the stems, roots, fruits, and seeds of plants such as sweet potato, cassava, corn, potato, and many more. In addition to its original form, starch can be modified by reducing its size. Starch nanoparticles have a small size and large active surface area, making them suitable for use as fillers or as a reinforcing material in bioplastics. The aim of reinforcing material is to improve the characteristics of bioplastics. This literature study aims to provide in-depth information on the potential use of starch nanoparticles as a reinforcing material in bioplastic packaging. This study also reviews starch size reduction methods including acid hydrolysis, nanoprecipitation, milling, and others; characteristics of the nano-starch particle; and methods to produce bioplastic and its characteristics. The use of starch nanoparticles as a reinforcing material can increase tensile strength, reduce water vapor and oxygen permeability, and increase the biodegradability of bioplastics. However, the use of starch nanoparticles as a reinforcing material for bioplastic packaging still encounters obstacles in its commercialization efforts, due to high production costs and ineffectiveness.

Comprehensive Enzymatic Conversion of Starch for the Food Industry

This study demonstrated the feasibility of comprehensive enzymatic conversion of starch for non-waste applications in food industry. Enzymatic conversion of starch gives rise to nano-sized particles that can be used for manufacturing biodegradable and edible packaging materials and glucose syrup for replacing sugar in confectionery formulations. The 96 h enzymatic hydrolysis yielded starch nanoparticles smaller than 100 nm. Films based on nano-sized starch particles have promising physicochemical properties for manufacturing biodegradable and edible packaging materials. Such properties as reduced moisture content, increased homogeneity, crystallinity, and high initial thermal stability improve the mechanical and performance characteristics of the final food packaging materials. During film formation from starch subjected to preliminary mechanical amorphization, the polymer chain is recrystallized. The C-type crystal structure of starch is converted to the B-type structure. The supernatant obtained by starch hydrolysis can be used for producing glucose syrup. The resulting glucose syrup can be used as a sugar substitute in production of confectionery products. No objective technological differences in properties of glucose syrup obtained by comprehensive conversion of starch and the commercially available glucose syrup derived from sucrose were revealed.

Effect of dual modification with citric acid combined with ultrasonication on hydrolysis kinetics, morphology and structure of corn starch dispersions

Corn starch dispersions (CSD) were hydrolyzed with citric acid and compared with CSD co-treated with citric acid combined with ultrasonication for 1 to 18 days, which are designated as single modification (CSD-SM) and dual modification (CSD-DM), respectively. The logistic functions monitor the dynamics of the hydrolysis advance (%) of the CSD-SM and CSD-DM as a function of time, where the zones most vulnerable to the single-treatment and/or co-treatment of the corn starch granules (CSG) are the amorphous or disordered regions. The characterization results of CSD-DM suggest that the structural changes caused by dual modification affected the morphology, sequence, and microstructure of the CSG. The heterogeneous changes caused by the dual modification changed the configuration of the CSG, generating a kind of destemming of the amorphous lamellae (depolymerization), an increase in the percentage of relative crystallinity of the CSD-DM and an active rearrangement of the intralamellar chains that promoted the relative amount of double helix for 18 days of double modification. The synergistic effect of the dual modification for CSD by the sequential combination of a chemical treatment followed by a physical one improved the hydrolyzed advance by 12 %, the relative crystallinity by 10 %, and the promotion of double helices by 25 % during 18 days of co-treatment.

Recent Trends in the Preparation of Nano-Starch Particles

Starch is affected by several limitations, e.g., retro-gradation, high viscosity even at low concentrations, handling issues, poor freeze-thaw stability, low process tolerance, and gel opacity. In this context, physical, chemical, and enzymatic methods have been investigated for addressing such limitations or adding new attributes. Thus, the creation of biomaterial-based nanoparticles has sparked curiosity. Because of that, single nucleotide polymorphisms are gaining a lot of interest in food packaging technology. This is due to their ability to increase the mechanical and water vapor resistance of the matrix, as well as hide its re-crystallization during storage in high-humidity atmospheres and enhance the mechanical properties of films when binding in paper machines and paper coating. In medicine, single nucleotide polymorphisms (SNPs) are suitable as carriers in the field of drug delivery for immobilized bioactive or therapeutic agents, as well as wastewater treatments as an alternative to expensive activated carbons. Starch nanoparticle preparations can be performed by hydrolysis via acid hydrolysis of the amorphous part of a starch molecule, the use of enzymes such as pullulanase or isoamylase, or a combination of two regeneration and mechanical treatments with the employment of extrusion, irradiation, ultrasound, or precipitation. The possibility of obtaining cheap and easy-to-use methods for starch and starch derivative nanoparticles is of fundamental importance. Nano-precipitation and ultra-sonication are rather simple and reliable methods for nanoparticle production. The process involves the addition of a diluted starch solution into a non-solvent, and ultra-sonication aims to reduce the size by breaking the covalent bonds in polymeric material due to intense shear forces or mechanical effects associated with the collapsing of micro-bubbles by sound waves. The current study focuses on starch nanoparticle manufacturing, characterization, and emerging applications.

Polysaccharide-based nanosystems: a review

Polysaccharide-based nanosystem is an umbrella term for many areas within research and technology dealing with polysaccharides that have at least one of their dimensions in the realm of a few hundreds of nanometers. Nanoparticles, nanocrystals, nanofibers, nanofilms, and nanonetworks can be fabricated from many different polysaccharide resources. Abundance in nature, cellulose, starch, chitosan, and pectin of different molecular structures are widely used to fabricate nanosystems for versatile industrial applications. This review presents the dissolution and modification of polysaccharides, which are influenced by their different molecular structures and applications. The dissolution ways include conventional organic solvents, ionic liquids, inorganic strong alkali and acids, enzymes, and hydrothermal treatment. Rheological properties of polysaccharide-based nano slurries are tailored for the purpose functions of the final products, e.g., imparting electrostatic functions of nanofibers to reduce viscosity by using lithium chloride and octenyl succinic acid to increase the hydrophobicity. Nowadays, synergistic effects of polysaccharide blends are increasingly highlighted. In particular, the reinforcing effect of nanoparticles, nanocrystals, nanowhiskers, and nanofibers to hydrogels, aerogels, and scaffolds, and the double network hydrogels of a rigid skeleton and a ductile substance have been developed for many emerging issues.

Characterization of acid hydrolysis based nano-converted mung bean (Vigna radiata L.) starch for morphological, rheological and thermal properties

Mung bean starch nanocrystals (SNC) were fabricated using acid hydrolysis. The resulting nanocrystals were studied for their morphological, thermal, and rheological properties. Irregular or round-shaped nano-scale crystals with average hydrodynamic diameter of 179 nm obtained after acid hydrolysis. The mung bean SNC revealed a C_B-type crystalline pattern with enhanced crystallinity as studied by X-ray diffraction (XRD). Lower negative zeta potential was obtained for mung bean SNC as compared to its native starch. Thermal peaks disappeared for nanocrystals, which indicated an increased thermal instability of mung bean SNC. A shear-thinning behavior, even at high concentrations of SNC in the suspension was noticed. The elastic behavior was observed at all studied concentrations and it was independent of the frequency change.

Rapid Ultrasound-Assisted Starch Extraction from Sago Pith Waste (SPW) for the Fabrication of Sustainable Bioplastic Film

The present study was conducted to optimize the extraction yield of starch from sago (Metroxylon sagu) pith waste (SPW) with the assistance of ultrasound ensued by the transformation of extracted starch into a higher value-added bioplastic film. Sago starch with extraction yield of 71.4% was successfully obtained using the ultrasound-assisted extraction, with the following conditions: particle size <250 µm, solid loading of 10 wt.%, ultrasonic amplitude of 70% and duty cycle of 83% in 5 min. The rapid ultrasound approach was proven to be more effective than the conventional extraction with 60.9% extraction yield in 30 min. Ultrasound-extracted starch was found to exhibit higher starch purity than the control starch as indicated by the presence of lower protein and ash contents. The starch granules were found to have irregular and disrupted surfaces after ultrasonication. The disrupted starch granules reduced the particle size and increased the swelling power of starch which was beneficial in producing a film-forming solution. The ultrasound-extracted sago starch was subsequently used to prepare a bioplastic film via solution casting method. A brownish bioplastic film with tensile strength of 0.9 ± 0.1 MPa, Young’s modulus of 22 ± 0.8 MPa, elongation at break of 13.6 ± 2.0% and water vapour permeability (WVP) of 1.11 ± 0.1 × 10⁻⁸ g m⁻¹ s⁻¹ Pa⁻¹ was obtained, suggesting its feasibility as bioplastic material. These findings provide a means of utilization for SPW which is in line with the contemporary trend towards greener and sustainable products and processes.

Modification in physicochemical, structural and digestive properties of pea starch during heat-moisture process assisted by pre- and post-treatment of ultrasound

Ultrasound is increasingly used for physicochemical modification of food systems as a green technology. Effects of heat-moisture treatment (HMT) assisted by pre- and post-treatment of ultrasound on physicochemical, structural and digestive properties of pea starch was investigated. Pea starch maintained the original morphology and C-type of crystalline after ultrasound treatment (UT), but 4 h or more of HMT and HMT assisted by UT changed the crystalline from C-type to A-type. All treatments decreased the crystallinity, molecular weight, swelling power and solubility at 70-90 °C, and elevated the content of resistant starch. Moreover, HMT assisted by pretreatment of UT was found to increase the viscosity and high-temperature stability of starch paste compared with others by the orderly combined effect of UT-induced depolymerization and HMT-induced depolymerization and rearrangement of starch chains. These results may promote the appropriate use of ultrasound in food industries and the production of starch materials for potential applications.

The assisting effects of ultrasound on the multiscale characteristics of heat-moisture treated starch from Agriophyllum squarrosum seeds

Present study was aimed to characterize the effects of heat-moisture treatments supported by ultrasound on structural, physicochemical and digestive properties of the starch from Agriophyllum squarrosum seeds. The starch sample was subjected to heat-moisture (120°C, 25% moisture) for different durations with assisting by pre- or post-treatment of ultrasound (20 Hz, 300 W, 20 min). A. squarrosum starch exhibited the original A-type of crystalline structure after all treatments. All modified starches had lower amylose content, amylopectin molecular weight, swelling power and solubility, and higher resistant starch content than the native starch. Heat-moisture treatments and dual modifications of heat-moisture and ultrasound increased the gelatinization temperature of starch granules and significantly (p ≤ 0.05) reduced the viscosity of starch paste. Pretreatment of ultrasound enhanced the effects of heat-moisture on the viscosity properties while post-treatment of ultrasound weakened which on the gelatinization temperature, by regulating the changes of double helix structure and short-range ordered structure in starch granules tested by Fourier-transform infrared spectrometer. Scanning electron microscopy unveiled that A. squarrosum starch pretreated by ultrasound became more susceptible to heat moisture in morphology. This work was very important for the deep excavation of the characteristics of A. squarrosum starch and the effective application of ultrasound in starch modifications.

Synthesis, characterization, and utilization of potato starch nanoparticles as a filler in nanocomposite films

The nanoparticles for the preparation of nanocomposite starch films were synthesized from potato starch using the acid hydrolysis method. The films were prepared by incorporating starch nanoparticles into the film formulation at 0.5, 1, 2, 5, and 10% level of total starch. The control starch film was prepared without the incorporation of starch nanoparticles (SNPs) in film formulation. The starch and SNPs were analyzed for physicochemical and morphological properties. The absorption capacity of SNPs for water and oil was significantly (p < 0.05) lower as compared to native starch. Whereas, the swelling power and solubility of SNPs were significantly (p < 0.05) higher than the swelling power and solubility of starch, respectively. The starch granules were oval and spherical with regular surfaces whereas the SNPs had irregular cracked exteriors spaces. The water vapor transmission rate (WVTR) from nanocomposite starch films was significantly (p < 0.05) lower than the control starch film. The burst strength of films was increased significantly (p < 0.05) with an increased level of SNPs incorporation in film formulation. The incorporation of SNPs increased film thickness and biodegradability. Thus, the present study revealed that the incorporation of SNPs in film formulation resulted in improved film properties.

Nanostarch: Preparation, Modification, and Application in Pickering Emulsions

Nanostarch, as a food-grade Pickering emulsion stabilizer, has attracted wide attention owing to its biodegradability, nontoxicity, small size, and large specific surface area. In this review, the preparation, modification, and application of Pickering emulsions incorporating nanostarch are described. At present, methods for nanostarch preparation mainly include acid hydrolysis, acid hydrolysis combined with other treatments, nanoprecipitation, ultrasonication, ball milling, and cross-linking. Nanostarch is a promising Pickering emulsion stabilizer, and its emulsifying ability of nanostarch is significantly improved by hydrophobic modification. The hydrophobicity, charge, size, and content of nanostarch affect the emulsion stability. Future developments in this area of research include the efficient and environmentally friendly preparation of nanostarch as well as the control of its hydrophobicity via modification. Future studies should focus on the digestibility and storage stability of Pickering emulsions stabilized by nanostarch under different conditions.

Sago starch nanocrystal-stabilized Pickering emulsions: Stability and rheological behavior

This study presents the isolation of SNC from sago starch and its performance as proficient particle emulsifier. It highlights the impact of SNC on the stability and rheological properties of oil-in-water (o/w) emulsions. The percentage yield of the SNC obtained was equivalent to 25 ± 0.1% (w/w) with particle diameters ranging from 25 to 100 nm. A series of Pickering emulsion at different ratios of oil (5%-35% v/v) and SNC (1%-4% w/v) was prepared for further investigations. The mean droplet diameter of emulsions obtained was ranged from 19.12 to 35.96 μm, confirming the effects of both SNC and oil content on the droplet's diameter distribution. Formulations with 4.0 wt% of SNC exhibited the maximum stability against coalescence. Results obtained have justified that the SNC can be used as an alternative solid emulsifier in producing stable emulsion with desired properties for various applications.

Formation and structural evolution of starch nanocrystals from waxy maize starch and waxy potato starch

The formation and structural evolution of starch nanocrystals from waxy maize starch (WMS) and waxy potato starch (WPS) by acid hydrolysis were studied. The relative crystallinity, the short-range molecular order, and the double-helix content of WMS and WPS increased significantly during the initial stage of acid hydrolysis, indicating that acid preferentially eroded the amorphous regions of starch granules. With time, there was increased destruction of lamellar structures, causing the granules to completely disintegrate to form nanocrystals. WMS and WPS displayed different hydrolysis mechanisms. WPS was more susceptible to acid hydrolysis than WMS, and WMS exhibited an endo-corrosion pattern and WPS showed an exo-corrosion pattern. WMS nanocrystals had a parallelepiped shape, and WPS nanocrystals were round. This difference in shape is likely due to the different packing configuration of double helices in native starches.

Effects of acid hydrolysis on the evolution of starch fine molecular structures and gelatinization properties

Effects of acid hydrolysis on amylose molecular structures and their relations to starch gelatinization properties were investigated. First-order kinetics models were applied to fit the evolution curve of starch chain-length and molecular size by acid hydrolysis treatment. Results showed that a single hydrolysis phase was involved in the degradation of waxy maize starch chains, while two distinct phases existed for the degradation of maize, high amylose maize and sago starch chains. The fast hydrolysis phase involved degradation of amylose chains with DP > ~300 and amylopectin long intra-cluster branches, while amylose chains with DP < ~300 was involved in the slow hydrolysis phase. Amylose molecules with DP ~ 300 were proposed to impact starch gelatinization properties by interaction with cut-off amylopectin double helices and formation of amylose crystallites/entanglements. This study could help food industry precisely control amylose molecular structures by acid hydrolysis treatment to develop starchy foods with desirable properties.

The improving effects of cold plasma on multi-scale structure, physicochemical and digestive properties of dry heated red adzuki bean starch

The effect of dry heat (DH, 130 °C, 1, 3 and 9 h), cold plasma (CP, 40 V, 1, 5 and 10 min) and their combination (D-P) treatment on the structure, physicochemical and digestive properties of red adzuki bean starch were studied. The results showed that DH or CP had slight change in morphology while diffraction pattern of starch was remained. With the extension of treated time of DH and CP, the amylose content, crystallinity, molecular weight, short-range order, the long chain of amylopectin, enthalpy value, swelling power, digestibility were reduced, while gelatinization temperatures, the short chain of amylopectin and solubility were increased. The D-P had deeper modification than the single treatment. The combination of dry heat and cold plasma is a simple and green method to improve the starch structure and enhance starch properties and this modified starch could be implemented to tailor starch to the desired food applications.