Bioactive injectable aggregates with nanofibrous microspheres and human dental pulp stem cells: A translational strategy in dental endodontics

Chios gum mastic enhance the proliferation and odontogenic differentiation of human dental pulp stem cells

Dental pulp stem cells (DPSCs) are a type of adult stem cell present in the dental pulp tissue. They possess a higher proliferative capacity than bone marrow mesenchymal stem cells. Their ease of collection from patients makes them well-suited for tissue engineering applications, such as tooth and nerve regeneration. Chios gum mastic (CGM), a resin extracted from the stems and leaves of Pistacia lentiscus var. Chia, has garnered attention for its potential in tissue regeneration. This study aims to confirm alterations in cell proliferation rates and induce differentiation in human DPSCs (hDPSCs) through CGM treatment, a substance known for effectively promoting odontogenic differentiation. Administration of CGM to hDPSC cells was followed by an assessment of cell survival, proliferation, and odontogenic differentiation through protein and gene analysis. The study revealed that hDPSCs exhibited low sensitivity to CGM toxicity. CGM treatment induced cell proliferation by activating cell-cycle proteins through the Wnt/β-catenin pathway. Additionally, the study demonstrated that CGM enhances alkaline phosphatase activation by upregulating the expression of collagen type I, a representative matrix protein of dentin. This activation of markers associated with odontogenic and bone differentiation ultimately facilitated the mineralization of hDPSCs. This study concludes that CGM, as a natural substance, fosters the cell cycle and cell proliferation in hDPSCs. Furthermore, it triggers the transcription of odontogenic and osteogenic markers, thereby facilitating odontogenic differentiation.

Challenges and Opportunities in Developing Tracheal Substitutes for the Recovery of Long-Segment Defects

Tracheal resection and reconstruction procedures are necessary when stenosis, tracheomalacia, tumors, vascular lesions, or tracheal injury cause a tracheal blockage. Replacement with a tracheal substitute is often recommended when the trauma exceeds 50% of the total length of the trachea in adults and 30% in children. Recently, tissue engineering and other advanced techniques have shown promise in fabricating biocompatible tracheal substitutes with physical, morphological, biomechanical, and biological characteristics similar to native trachea. Different polymers and biometals are explored. Even with limited success with tissue-engineered grafts in clinical settings, complete healing of tracheal defects remains a substantial challenge due to low mechanical strength and durability of the graft materials, inadequate re-epithelialization and vascularization, and restenosis. This review has covered a range of reconstructive and regenerative techniques, design criteria, the use of bioprostheses and synthetic grafts for the recovery of tracheal defects, as well as the traditional and cutting-edge methods of their fabrication, surface modification for increased immuno- or biocompatibility, and associated challenges.

Nanofibrous Microspheres: A Biomimetic Platform for Bone Tissue Regeneration

Bone, a fundamental constituent of the human body, is a vital scaffold for support, protection, and locomotion, underscoring its pivotal role in maintaining skeletal integrity and overall functionality. However, factors such as trauma, disease, or aging can compromise bone structure, necessitating effective strategies for regeneration. Traditional approaches often lack biomimetic environments conducive to efficient tissue repair. Nanofibrous microspheres (NFMS) present a promising biomimetic platform for bone regeneration by mimicking the native extracellular matrix architecture. Through optimized fabrication techniques and the incorporation of active biomolecular components, NFMS can precisely replicate the nanostructure and biochemical cues essential for osteogenesis promotion. Furthermore, NFMS exhibit versatile properties, including tunable morphology, mechanical strength, and controlled release kinetics, augmenting their suitability for tailored bone tissue engineering applications. NFMS enhance cell recruitment, attachment, and proliferation, while promoting osteogenic differentiation and mineralization, thereby accelerating bone healing. This review highlights the pivotal role of NFMS in bone tissue engineering, elucidating their design principles and key attributes. By examining recent preclinical applications, we assess their current clinical status and discuss critical considerations for potential clinical translation. This review offers crucial insights for researchers at the intersection of biomaterials and tissue engineering, highlighting developments in this expanding field.

Fabrication and characterization of a novel injectable human amniotic membrane hydrogel for dentin-pulp complex regeneration

OBJECTIVE

Injectable biomaterials that can completely fill the root canals and provide an appropriate environment will have potential application for pulp regeneration in endodontics. This study aimed to fabricate and characterize a novel injectable human amniotic membrane (HAM) hydrogel scaffold crosslinked with genipin, enabling the proliferation of Dental Pulp Stem Cells (DPSCs) and optimizing pulp regeneration.

METHODS

HAM extracellular matrix (ECM) hydrogels (15, 22.5, and 30 mg/ml) crosslinked with different genipin concentrations (0, 0.1, 0.5, 1, 5, and 10 mM) were evaluated for mechanical properties, tooth discoloration, cell viability, and proliferation of DPSCs. The hydrogels were subcutaneously injected in rats to assess their immunogenicity. The hydrogels were applied in a root canal model and subcutaneously implanted in rats to determine their regenerative potential for eight weeks, and histological and immunostaining analyses were performed.

RESULTS

Hydrogels crosslinked with low genipin concentration demonstrated low tooth discoloration, but 0.1 mM genipin crosslinked hydrogels were excluded due to their unfavourable mechanical properties. The degradation ratio was lower in hydrogels crosslinked with 0.5 mM genipin. The 30 mg/ml-0.5 mM crosslinked hydrogel exhibited a microporous structure, and the modulus of elasticity was 1200 PA. In vitro, cell culture showed maximum viability and proliferation in 30 mg/ml-0.5 mM crosslinked hydrogel. All groups elicited minimum immunological responses, and highly vascularized pulp-like tissue was formed in human tooth roots in both groups with/without DPSCs.

SIGNIFICANCE

Genipin crosslinking improved the biodegradability of injectable HAM hydrogels and conferred higher biocompatibility. Hydrogels encapsulated with DPSCs can support stem cell viability and proliferation. In addition, highly vascularized pulp-like tissue formation by this biomaterial displayed potential for pulp regeneration.

Mesenchymal condensation in tooth development and regeneration: a focus on translational aspects of organogenesis

The teeth are vertebrate-specific, highly specialized organs performing fundamental functions of mastication and speech, the maintenance of which is crucial for orofacial homeostasis and is further linked to systemic health and human psychosocial well-being. However, with limited ability for self-repair, the teeth can often be impaired by traumatic, inflammatory, and progressive insults, leading to high prevalence of tooth loss and defects worldwide. Regenerative medicine holds the promise to achieve physiological restoration of lost or damaged organs, and in particular an evolving framework of developmental engineering has pioneered functional tooth regeneration by harnessing the odontogenic program. As a key event of tooth morphogenesis, mesenchymal condensation dictates dental tissue formation and patterning through cellular self-organization and signaling interaction with the epithelium, which provides a representative to decipher organogenetic mechanisms and can be leveraged for regenerative purposes. In this review, we summarize how mesenchymal condensation spatiotemporally assembles from dental stem cells (DSCs) and sequentially mediates tooth development. We highlight condensation-mimetic engineering efforts and mechanisms based on ex vivo aggregation of DSCs, which have achieved functionally robust and physiologically relevant tooth regeneration after implantation in animals and in humans. The discussion of this aspect will add to the knowledge of development-inspired tissue engineering strategies and will offer benefits to propel clinical organ regeneration.

Identification of histological threshold concepts in health sciences curricula: Students' perception

Students' metacognitive skills and perceptions are considered important variables for high-quality learning. In this study, students' perceptions were used to identify histological threshold concepts (integrative, irreversible, transformative, and troublesome) in three health sciences curricula. A specific questionnaire was developed and validated to characterize students' perceptions of histological threshold concepts. A sample of 410 undergraduate students enrolled in the dentistry, medicine, and pharmacy degree programs participated in the study. Concepts assessed in the study were clustered to ten categories (factors) by exploratory and confirmatory factor analysis. Concepts linked to tissue organization and tissue functional states received the highest scores from students in all degree programs, suggesting that the process of learning histology requires the integration of both static concepts related to the constituent elements of tissues and dynamic concepts such as stem cells as a tissue renewal substrate, or the euplasic, proplasic and retroplasic states of tissues. The complexity of integrating static and dynamic concepts may pose a challenging barrier to the comprehension of histology. In addition, several differences were detected among the students in different degree programs. Dentistry students more often perceived morphostructural concepts as threshold concepts, whereas medical students highlighted concepts related to two-dimensional microscopic identification. Lastly, pharmacy students identified concepts related to tissue general activity as critical for the comprehension and learning of histology. The identification of threshold concepts through students' perceptions is potentially useful to improve the teaching and learning process in health sciences curricula.

Advances in Scaffolds Used for Pulp-Dentine Complex Tissue Engineering - A Narrative Review

Pulp necrosis in immature teeth disrupts root development and predisposes roots to fracture as a consequence of their thin walls and open apices. Regenerative endodontics is a developing treatment modality whereby necrotic pulps are replaced with newly formed healthy tissue inside the root canal. Many clinical studies have demonstrated the potential of this strategy to stimulate root maturation and apical root-end closure. However, clinical outcomes are patient-dependent and unpredictable. The development of predictable clinical protocols is achieved through the interplay of the three classical elements of tissue engineering, namely, stem cells, signaling molecules, and scaffolds. Scaffolds provide structural support for cells to adhere and proliferate and also regulate cell differentiation and metabolism. Hence, designing and fabricating an appropriate scaffold is a crucial step in tissue engineering. In this review, four main classes of scaffolds used to engineer pulp-dentine complexes, including bioceramic-based scaffolds, synthetic polymer-based scaffolds, natural polymer-based scaffolds, and composite scaffolds, are covered. Additionally, recent advances in the design, fabrication, and application of such scaffolds are analysed along with their advantages and limitations. Finally, the importance of vascular network establishment in the success of pulp-dentine complex regeneration and strategies used to create scaffolds to address this challenge are discussed.

Functional microspheres for tissue regeneration

As a new type of injectable biomaterials, functional microspheres have attracted increasing attention in tissue regeneration because they possess some advantageous properties compared to other biomaterials, including hydrogels. A variety of bio-inspired microspheres with unique structures and properties have been developed as cellular carriers and drug delivery vehicles in recent years. In this review, we provide a comprehensive summary of the progress of functional and biodegradable microspheres that have been used for tissue regeneration over the last two decades. First, we briefly introduce the biomaterials and general methods for microsphere fabrication. Next, we focus on the newly developed technologies for preparing functional microspheres, including macroporous microspheres, nanofibrous microspheres, hollow microspheres, core-shell structured microspheres, and surface-modified functional microspheres. After that, we discuss the application of functional microspheres for tissue regeneration, specifically for bone, cartilage, dental, neural, cardiac, and skin tissue regeneration. Last, we present our perspectives and future directions of functional microspheres as injectable carriers for the future advancement of tissue regeneration.

Self-Assembled Hydrogel Microparticle-Based Tooth-Germ Organoids

Here, we describe the characterization of tooth-germ organoids, three-dimensional (3D) constructs cultured in vitro with the potential to develop into living teeth. To date, the methods used to successfully create tooth organoids capable of forming functional teeth have been quite limited. Recently, hydrogel microparticles (HMP) have demonstrated utility in tissue repair and regeneration based on their useful characteristics, including their scaffolding ability, effective cell and drug delivery, their ability to mimic the natural tissue extracellular matrix, and their injectability. These outstanding properties led us to investigate the utility of using HMPs (average diameter: 158 ± 32 µm) derived from methacrylated gelatin (GelMA) (degree of substitution: 100%) to create tooth organoids. The tooth organoids were created by seeding human dental pulp stem cells (hDPSCs) and porcine dental epithelial cells (pDE) onto the HMPs, which provided an extensive surface area for the cells to effectively attach and proliferate. Interestingly, the cell-seeded HMPs cultured on low-attachment tissue culture plates with gentle rocking self-assembled into organoids, within which the cells maintained their viability and morphology throughout the incubation period. The self-assembled organoids reached a volume of ~50 mm3 within two weeks of the in vitro tissue culture. The co-cultured hDPSC-HMP and pDE-HMP structures effectively attached to each other without any externally applied forces. The presence of polarized, differentiated dental cells in these composite tooth-bud organoids demonstrated the potential of self-assembled dental cell HMPs to form tooth-bud organoid-like structures for potential applications in tooth regeneration strategies.

Generation of a novel model of bioengineered human oral mucosa with increased vascularization potential

Objective

The aim of this study was to generate novel models of bioartificial human oral mucosa with increased vascularization potential for future use as an advanced therapies medicinal product, by using different vascular and mesenchymal stem cell sources.

Background

Oral mucosa substitutes could contribute to the clinical treatment of complex diseases affecting the oral cavity. Although several models of artificial oral mucosa have been described, biointegration is a major issue that could be favored by the generation of novel substitutes with increased vascularization potential once grafted in vivo.

Methods

Three types of mesenchymal stem cells (MSCs) were obtained from adipose tissue, bone marrow, and dental pulp, and their in vitro potential was evaluated by inducing differentiation to the endothelial lineage using conditioning media. Then, 3D models of human artificial oral mucosa were generated using biocompatible fibrin‐agarose biomaterials combined with human oral mucosa fibroblasts and each type of MSC before and after induction to the endothelial lineage, using human umbilical vein endothelial cells (HUVEC) as controls. The vascularization potential of each oral mucosa substitute was assessed in vitro and in vivo in nude mice.

Results

In vitro induction of MSCs kept in culture was able to increase the expression of VEGF, CD31, and vWF endothelial markers, especially in bone marrow and dental pulp‐MSCs, and numerous proteins with a role in vasculogenesis become overexpressed. Then, in vivo grafting resulted in a significant increase in blood vessels formation at the interface area between the graft and the host tissues, with significantly positive expression of VEGF, CD31, vWF, and CD34 as compared to negative controls, especially when pre‐differentiated MSCs derived from bone marrow and dental pulp were used. In addition, a significantly higher number of cells committed to the endothelial lineage expressing the same endothelial markers were found within the bioartificial tissue.

Conclusion

Our results suggest that the use of pre‐differentiated MSCs could contribute to a rapid generation of a vascular network that may favor in vivo biointegration of bioengineered human oral mucosa substitutes.

Biofabrication of a Tubular Model of Human Urothelial Mucosa Using Human Wharton Jelly Mesenchymal Stromal Cells

Several models of bioartificial human urothelial mucosa (UM) have been described recently. In this study, we generated novel tubularized UM substitutes using alternative sources of cells. Nanostructured fibrin-agarose biomaterials containing fibroblasts isolated from the human ureter were used as stroma substitutes. Then, human Wharton jelly mesenchymal stromal cells (HWJSC) were used to generate an epithelial-like layer on top. Three differentiation media were used for 7 and 14 days. Results showed that the biofabrication methods used here succeeded in generating a tubular structure consisting of a stromal substitute with a stratified epithelial-like layer on top, especially using a medium containing epithelial growth and differentiation factors (EM), although differentiation was not complete. At the functional level, UM substitutes were able to synthesize collagen fibers, proteoglycans and glycosaminoglycans, although the levels of control UM were not reached ex vivo. Epithelial differentiation was partially achieved, especially with EM after 14 days of development, with expression of keratins 7, 8, and 13 and pancytokeratin, desmoplakin, tight-junction protein-1, and uroplakin 2, although at lower levels than controls. These results confirm the partial urothelial differentiative potential of HWJSC and suggest that the biofabrication methods explored here were able to generate a potential substitute of the human UM for future clinical use.

hDPSC-laden GelMA microspheres fabricated using electrostatic microdroplet method for endodontic regeneration

The microsphere system has attracted considerable attention as a stem-cell delivery vehicle in regeneration medicine owing to its injectability, fast substance transfer ability, and mimicry of the three-dimensional native environment. However, suitable biomaterials for preparation of microspheres optimal for endodontic regeneration are still being explored. Owing to its excellent bioactivity and biodegradability, gelatin methacryloyl (GelMA) was used to fabricate hydrogel microspheres by the electrostatic microdroplet method, and the potential of GelMA microspheres applied in endodontic regeneration was studied. The average size of GelMA microspheres encapsulating human dental pulp stem cells (hDPSCs) was ~200 μm, and the Young's modulus was approximately 582.8 ± 66.0 Pa, which was close to that of the natural human dental pulp. The encapsulated hDPSCs could effectively adhere, spread, proliferate, and secrete extracellular matrix proteins in the microspheres, and tended to occupy the outer layer. Moreover, the cell-laden GelMA microsphere system could withstand cryopreservation, and the thawed cells exhibited normal functions. After subcutaneous implantation in a nude mouse model, more vascularized pulp-like tissues were generated in the cell-laden GelMA microsphere group compared with that in the cell-laden bulk GelMA group, and this was accompanied by a suitable degradation rate. The GelMA microspheres showed remarkable performances and great potential as cell delivery vehicles in endodontic regeneration.

Advances of nanomaterial applications in oral and maxillofacial tissue regeneration and disease treatment

Using bioactive nanomaterials in clinical treatment has been widely aroused. Nanomaterials provide substantial improvements in the prevention and treatment of oral and maxillofacial diseases. This review aims to discuss new progresses in nanomaterials applied to oral and maxillofacial tissue regeneration and disease treatment, focusing on the use of nanomaterials in improving the quality of oral and maxillofacial healthcare, and discuss the perspectives of research in this arena. Details are provided on the tissue regeneration, wound healing, angiogenesis, remineralization, antitumor, and antibacterial regulation properties of nanomaterials including polymers, micelles, dendrimers, liposomes, nanocapsules, nanoparticles and nanostructured scaffolds, etc. Clinical applications of nanomaterials as nanocomposites, dental implants, mouthwashes, biomimetic dental materials, and factors that may interact with nanomaterials behaviors and bioactivities in oral cavity are addressed as well. In the last section, the clinical safety concerns of their usage as dental materials are updated, and the key knowledge gaps for future research with some recommendation are discussed. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement.

Parathyroid hormone enhances the osteo/odontogenic differentiation of dental pulp stem cells via ERK and P38 MAPK pathways

OBJECTIVE

Parathyroid hormone (PTH) is a main systemic mediator of calcium and phosphate homeostasis in the bone. Dental pulp stem cells (DPSCs) have been extensively studied in the regeneration of bone and tooth tissues. This paper aims to uncover the influences of PTH on the proliferative ability and osteo/odontogenic differentiation of DPSCs, as well as the underlying mechanisms.

MATERIALS AND METHODS

The optimal concentration of PTH on DPSCs was determined by alkaline phosphatase (ALP) activity assay, ALP staining and western blot analysis. Proliferative ability and cell cycle distribution of DPSCs were analyzed by Cell counting kit-8, 5-ethynyl-20-deoxyuridine assay, and flow cytometry. Osteo/odontogenic capacity of DPSCs was evaluated and finally, the involvement of mitogen-activated protein kinase (MAPK) pathway was assessed.

RESULTS

Purified DPSCs were obtained by enzymatic digestion, which presented a typical fibroblast-like morphology. 10^-9  mol/L PTH was concerned as the optimal concentration for DPSCs induction. 10^-9  mol/L PTH treatment did not change the proliferative rate of DPSCs (p > .05). Relative expressions of DSPP/DSPP, RUNX2/RUNX2, OSX/OSX, and ALP/ALP were upregulated in PTH-treated DPSCs relative to control group. Particularly, their mRNA/protein levels at Day 7 were markedly higher relative to those at Day 3 (p < .05 or p < .01). Mineralized nodules were formed after PTH induction, and calcium content increased by cetylpyridinium chloride quantitative analysis. Mechanistically, the protein levels of p-ERK and p-P38 significantly increased after PTH treatment, and the inhibitors targeting MAPK were identified that weakened the effects of PTH on the committed differentiation of DPSCs.

CONCLUSIONS

PTH enhances the osteo/odontogenic differentiation capacity of DPSCs via ERK and P38 signaling pathways.

Regenerating infected bone defects with osteocompatible microspheres possessing antibacterial activity

Treatment of infected bone defects still remains a formidable clinical challenge, and the design of bone implants with both anti-bacterial activity and osteogenesis effects is nowadays regarded as a powerful strategy for infection control and bone healing.

Top-cited Articles in Regenerative Endodontics: A Bibliometric Analysis

INTRODUCTION

Bibliometric analysis is a method for quantifying the research productivity, author performance, and manuscript impact. The citation count received by a scientific article is one of the indicators of its impact within a field. The purpose of this study was to identify the 100 top-cited articles published in regenerative endodontics and to analyze their main characteristics.

METHODS

Thomson Reuters Web of Science was searched to retrieve the 100 most-cited articles in "regenerative endodontics" published from January 1991 to February 2018 in the category of "Dentistry, Oral Surgery and Medicine." Among the included top-cited articles, the following parameters were recorded and analyzed: journal name, authors, institution, country, publication title and year, number of citations and average citations, type of study, collaborations, and key words. The data were analyzed using SPSS version 19.0 (IBM Corp, Armonk, NY) and VOS viewer software (version 1.6.7; Leiden University Center for Science and Technology Studies, Leiden, Netherlands).

RESULTS

Among the 100 top cited articles, the highest number of citations that an article received was 309. The top cited articles appeared in 14 different journals, and the Journal of Endodontics published the greatest number of these articles (66%). The majority of articles were published in the year 2014 (n = 17). The majority of articles originated from the United States (n = 51) with the most contribution from The University of Texas Health Science Center, San Antonio, TX. The most frequent first authors were Torabinejad (n = 4), Nosrat (n = 3), and Thibodeau (n = 3). In vitro studies were the most common study design (n = 29) followed by reviews (n = 21). "Regenerative endodontics" was the most frequently used key word.

CONCLUSIONS

This bibliometric analysis reveals the progress and trend of research in the field of regenerative endodontics. The in vitro articles published in the field of regenerative endodontics had the highest number of citations and average citation rates.

Pulp Regeneration Concepts for Nonvital Teeth: From Tissue Engineering to Clinical Approaches

Following the basis of tissue engineering (Cells-Scaffold-Bioactive molecules), regenerative endodontic has emerged as a new concept of dental treatment. Clinical procedures have been proposed by endodontic practitioners willing to promote regenerative therapy. Preserving pulp vitality was a first approach. Later procedures aimed to regenerate a vascularized pulp in necrotic root canals. However, there is still no protocol allowing an effective regeneration of necrotic pulp tissue either in immature or mature teeth. This review explores in vitro and preclinical concepts developed during the last decade, especially the potential use of stem cells, bioactive molecules, and scaffolds, and makes a comparison with the goals achieved so far in clinical practice. Regeneration of pulp-like tissue has been shown in various experimental conditions. However, the appropriate techniques are currently in a developmental stage. The ideal combination of scaffolds and growth factors to obtain a complete regeneration of the pulp-dentin complex is still unknown. The use of stem cells, especially from pulp origin, sounds promising for pulp regeneration therapy, but it has not been applied so far for clinical endodontics, in case of necrotic teeth. The gap observed between the hope raised from in vitro experiments and the reality of endodontic treatments suggests that clinical success may be achieved without external stem cell application. Therefore, procedures using the concept of cell homing, through evoked bleeding that permit to recreate a living tissue that mimics the original pulp has been proposed. Perspectives for pulp tissue engineering in the near future include a better control of clinical parameters and pragmatic approach of the experimental results (autologous stem cells from cell homing, controlled release of growth factors). In the coming years, this therapeutic strategy will probably become a clinical reality, even for mature necrotic teeth.

About stem cell research in dentistry: many doubts and too many pitfalls still affect the regenerative dentistry

Stem cells (SCs) research is one of the most promising approaches to regenerative medicine. Our understanding of SCs biology and their potential role in tissue repairing has notably increased during the last few years. Mesenchymal stem cells (MSCs) are present in almost all human tissues, including oral and dental tissues (dental-derived stem cells or DDSCs). Despite many doubts and too many pitfalls still affect regenerative dentistry; however, it represents an exciting challenge for the next generations of young dentists. Educating and training in regenerative medicine the new generation of researchers is of utmost importance, albeit often underestimated: regenerative dentistry represents a big opportunity for the next generations of researchers and clinicians, and this review report underlines that dental schools should pay more attention to teachings of strategic subjects, such as cell biology, molecular biology and tissue engineering.