Biomedical grafts for tracheal tissue repairing and regeneration "Tracheal tissue engineering: an overview"

Challenges and Opportunities in Developing Tracheal Substitutes for the Recovery of Long-Segment Defects

Tracheal resection and reconstruction procedures are necessary when stenosis, tracheomalacia, tumors, vascular lesions, or tracheal injury cause a tracheal blockage. Replacement with a tracheal substitute is often recommended when the trauma exceeds 50% of the total length of the trachea in adults and 30% in children. Recently, tissue engineering and other advanced techniques have shown promise in fabricating biocompatible tracheal substitutes with physical, morphological, biomechanical, and biological characteristics similar to native trachea. Different polymers and biometals are explored. Even with limited success with tissue-engineered grafts in clinical settings, complete healing of tracheal defects remains a substantial challenge due to low mechanical strength and durability of the graft materials, inadequate re-epithelialization and vascularization, and restenosis. This review has covered a range of reconstructive and regenerative techniques, design criteria, the use of bioprostheses and synthetic grafts for the recovery of tracheal defects, as well as the traditional and cutting-edge methods of their fabrication, surface modification for increased immuno- or biocompatibility, and associated challenges.

The effect of bioactivity of airway epithelial cells using methacrylated gelatin scaffold loaded with exosomes derived from bone marrow mesenchymal stem cells

The current evidence provides support for the involvement of bone marrow mesenchymal stem cells (BMSCs) in the regulation of airway epithelial cells. However, a comprehensive understanding of the underlying biological mechanisms remains elusive. This study aimed to isolate and characterize BMSC-derived exosomes (BMSC-Exos) and epithelial cells (ECs) through primary culture. Subsequently, the impact of BMSC-Exos on ECs was assessed in vitro, and sequencing analysis was conducted to identify potential molecular mechanisms involved in these interactions. Finally, the efficacy of BMSC-Exos was evaluated in animal models in vivo. In this study, primary BMSCs and ECs were efficiently isolated and cultured, and high-purity Exos were obtained. Upon uptake of BMSC-Exos, ECs exhibited enhanced proliferation (p < .05), while migration showed no difference (p > .05). Notably, invasion demonstrated significant difference (p < .05). Sequencing analysis suggested that miR-21-5p may be the key molecule responsible for the effects of BMSC-Exos, potentially mediated through the MAPK or PI3k-Akt signaling pathway. The in vivo experiments showed that the presence of methacrylated gelatin (GelMA) loaded with BMSC-Exos in composite scaffold significantly enhanced epithelial crawling in the patches in comparison to the pure decellularized group. In conclusion, this scheme provides a solid theoretical foundation and novel insights for the research and clinical application of tracheal replacement in the field of tissue engineering.

Decellularized Wharton's Jelly and Amniotic Membrane Demonstrate Potential Therapeutic Implants in Tracheal Defects in Rabbits

BACKGROUND

Tracheal grafts have been investigated for over a century, aiming to replace various lesions. However, tracheal reconstruction surgery remains a challenge, primarily due to anatomical considerations, intraoperative airway management, the technical complexity of reconstruction, and the potential postoperative morbidity and mortality. Due to research development, the amniotic membrane (AM) and Wharton's Jelly (WJ) arise as alternatives within the new set of therapeutic alternatives. These structures hold significant therapeutic potential for tracheal defects. This study analyzed the capacity of tracheal tissue regeneration after 60 days of decellularized WJ and AM implantation in rabbits submitted to conventional tracheostomy.

METHODS

An in vivo experimental study was carried out using thirty rabbits separated into three groups (Control, AM, and WJ) (n = 10). The analyses were performed 60 days after surgery through immunohistochemistry.

RESULTS

Different immunomarkers related to scar regeneration, such as aggrecan, TGF-β1, and α-SMA, were analyzed. However, they highlighted no significant difference between the groups. Collagen type I, III, and Aggrecan also showed no significant difference between the groups.

CONCLUSIONS

Both scaffolds appeared to be excellent frameworks for tissue engineering, presenting biocompatibility and a desirable microenvironment for cell survival; however, they did not display histopathological benefits in trachea tissue regeneration.

In silico model development and optimization of in vitro lung cell population growth

Tissue engineering predominantly relies on trial and error in vitro and ex vivo experiments to develop protocols and bioreactors to generate functional tissues. As an alternative, in silico methods have the potential to significantly reduce the timelines and costs of experimental programs for tissue engineering. In this paper, we propose a methodology to formulate, select, calibrate, and test mathematical models to predict cell population growth as a function of the biochemical environment and to design optimal experimental protocols for model inference of in silico model parameters. We systematically combine methods from the experimental design, mathematical statistics, and optimization literature to develop unique and explainable mathematical models for cell population dynamics. The proposed methodology is applied to the development of this first published model for a population of the airway-relevant bronchio-alveolar epithelial (BEAS-2B) cell line as a function of the concentration of metabolic-related biochemical substrates. The resulting model is a system of ordinary differential equations that predict the temporal dynamics of BEAS-2B cell populations as a function of the initial seeded cell population and the glucose, oxygen, and lactate concentrations in the growth media, using seven parameters rigorously inferred from optimally designed in vitro experiments.

Preparation of Decellularized Tissue as Dual Cell Carrier Systems: A Step Towards Facilitating Re-epithelization and Cell Encapsulation for Tracheal Reconstruction

Surgical treatment of tracheal diseases, trauma, and congenital stenosis has shown success through tracheal reconstruction coupled with palliative care. However, challenges in surgical-based tracheal repairs have prompted the exploration of alternative approaches for tracheal replacement. Tissue-based treatments, involving the cultivation of patient cells on a network of extracellular matrix (ECM) from donor tissue, hold promise for restoring tracheal structure and function without eliciting an immune reaction. In this study, we utilized decellularized canine tracheas as tissue models to develop two types of cell carriers: a decellularized scaffold and a hydrogel. Our hypothesis posits that both carriers, containing essential biochemical niches provided by ECM components, facilitate cell attachment without inducing cytotoxicity. Canine tracheas underwent vacuum-assisted decellularization (VAD), and the ECM-rich hydrogel was prepared through peptic digestion of the decellularized trachea. The decellularized canine trachea exhibited a significant reduction in DNA content and major histocompatibility complex class II, while preserving crucial ECM components such as collagen, glycosaminoglycan, laminin, and fibronectin. Scanning electron microscope and fluorescent microscope images revealed a fibrous ECM network on the luminal side of the cell-free trachea, supporting epithelial cell attachment. Moreover, the ECM-rich hydrogel exhibited excellent viability for human mesenchymal stem cells encapsulated for 3 days, indicating the potential of cell-laden hydrogel in promoting the development of cartilage rings of the trachea. This study underscores the versatility of the trachea in producing two distinct cell carriers-decellularized scaffold and hydrogel-both containing the native biochemical niche essential for tracheal tissue engineering applications.

Biomimetic Structure Hydrogel Loaded with Long-Term Storage Platelet-Rich Plasma in Diabetic Wound Repair

Exploring the preparation of multifunctional hydrogels from a bionic perspective is an appealing strategy. Here, a multifunctional hydrogel dressing inspired by the characteristics of porous extracellular matrix produced during Acomys wound healing is prepared. These dressings are printed by digital light processing printing of hydrogels composed of gelatin methacrylate, hyaluronic acid methacrylate, and pretreated platelet-rich plasma (PRP) to shape out triply periodic minimal surface structures, which are freeze-dried for long-term storage. These dressings mimic the porous extracellular matrix of Acomys, while the freeze-drying technique effectively extends the storage duration of PRP viability. Through in vivo and in vitro experiments, the biomimetic dressings developed in this study modulate cell behavior and facilitate wound healing. Consequently, this research offers a novel approach for the advancement of regenerative wound dressings.

Global Bibliometric and Visualized Analysis of Tracheal Tissue Engineering Research

The development of tracheal tissue engineering (TTE) has seen a rapid growth in recent years. The purpose of this study was to investigate the global status, trends, and hotspots of TTE research based on bibliometrics and visualization analysis. Publications related to TTE were retrieved and included in the Web of Science Core Collection. VOSviewer and CiteSpace were used to generate knowledge maps. Six hundred fifty-five publications were identified, and the quantity of the annual publications worldwide was on the increase. International collaboration is a widespread reality. The United States led the world in the field of trachea tissue engineering, whereas University College London was the institution with the greatest contribution. In addition, Biomaterials had a great influence in this field, attracting the largest number of papers. Moreover, the topics of TTE research largely concentrated on the biomechanical scaffold preparation, the vascularization and epithelialization of scaffold, the tracheal cartilage regeneration, and the tissue-engineered tracheal transplantation. And the research on the application of decellularization and 3D printing for the construction of a tissue-engineered trachea was likely to receive more widespread attention in the future. Impact statement In recent years, tracheal tissue engineering (TTE) has experienced rapid growth. In this study, we investigated the worldwide status and trends of TTE research, and revealed the countries, institutions, journals, and authors that had made significant contributions to the field of TTE. Moreover, the possible research hotspots in the future were predicted. According to our research, researchers can gain a better understanding of the trends in this field, and stay informed of the most current research by tracking key journals, institutions, and authors.

A review on antimicrobial strategies in mitigating biofilm-associated infections on medical implants

Biomedical implants are crucial in providing support and functionality to patients with missing or defective body parts. However, implants carry an inherent risk of bacterial infections that are biofilm-associated and lead to significant complications. These infections often result in implant failure, requiring replacement by surgical restoration. Given these complications, it is crucial to study the biofilm formation mechanism on various biomedical implants that will help prevent implant failures. Therefore, this comprehensive review explores various types of implants (e.g., dental implant, orthopedic implant, tracheal stent, breast implant, central venous catheter, cochlear implant, urinary catheter, intraocular lens, and heart valve) and medical devices (hemodialyzer and pacemaker) in use. In addition, the mechanism of biofilm formation on those implants, and their pathogenesis were discussed. Furthermore, this article critically reviews various approaches in combating implant-associated infections, with a special emphasis on novel non-antibiotic alternatives to mitigate biofilm infections.

Regeneration Process of an Autologous Tissue-Engineered Trachea (aTET) in a Rat Patch Tracheoplasty Model

The treatment of long-tracheal lesion is difficult because there are currently no viable grafts for tracheal replacement. To solve this problem, we have developed an autologous Tissue-Engineered Trachea (aTET), which is made up of collagenous tissues and cartilage-like structures derived from rat chondrocytes. This graft induced successful long-term survival in a small-animal experiment in our previous study. In this study, we investigated the regeneration process of an aTET to attain reproducible success. We prepared an aTET by using a specially designed mold and performed patch tracheoplasty with an aTET. We assigned twenty-seven rats to three groups according to the three types of patch grafts used: aTET patches (the aTET group), fresh tracheal autograft patches (the Ag group), or polylactic acid and polycaprolactone copolymer sheets (the PPc group). In each group, gross and histological evaluations were performed at 1 month (n = 3), 3 months (n = 3), and 6 months (n = 3) after implantation. We obtained high survival rates in all groups, but only the PPc group attained thick tracheal walls with granular tissues and no tracheal regeneration. On the other hand, the aTET and Ag groups reproducibly achieved complete tracheal regeneration in 6 months. So, an aTET could be a promising candidate for tracheal regeneration grafts.

Instant trachea reconstruction using 3D-bioprinted C-shape biomimetic trachea based on tissue-specific matrix hydrogels

Currently, 3D-bioprinting technique has emerged as a promising strategy to offer native-like tracheal substitutes for segmental trachea reconstruction. However, there has been very limited breakthrough in tracheal repair using 3D-bioprinted biomimetic trachea owing to the lack of ideal bioinks, the requirement for precise structural biomimicking, and the complexity of multi-step surgical procedures by mean of intramuscular pre-implantation. Herein, we propose a one-step surgical technique, namely direct end-to-end anastomosis using C-shape 3D-bioprinted biomimetic trachea, for segmental trachea defect repair. First, two types of tissue-specific matrix hydrogels were exploited to provide mechanical and biological microenvironment conducive to the specific growth ways of cartilage and fibrous tissue respectively. In contrast to our previous O-shape tracheal design, the tubular structure of alternating C-shape cartilage rings and connecting vascularized-fibrous-tissue rings was meticulously designed for rapid 3D-bioprinting of tracheal constructs with optimal printing paths and models. Furthermore, in vivo trachea regeneration in nude mice showed satisfactory mechanical adaptability and efficient physiological regeneration. Finally, in situ segmental trachea reconstruction by direct end-to-end anastomosis in rabbits was successfully achieved using 3D-bioprinted C-shape biomimetic trachea. This study demonstrates the potential of advanced 3D-bioprinting for instant and efficient repair of segmental trachea defects.

Airway disease decreases the therapeutic potential of epithelial stem cells

BACKGORUND

Tissue-engineered tracheal grafts (TETG) can be recellularized by the host or pre-seeded with host-derived cells. However, the impact of airway disease on the recellularization process is unknown.

METHODS

In this study, we determined if airway disease alters the regenerative potential of the human tracheobronchial epithelium (hTBE) obtained by brushing the tracheal mucosa during clinically-indicated bronchoscopy from 48 pediatric and six adult patients.

RESULTS

Our findings revealed that basal cell recovery and frequency did not vary by age or region. At passage 1, all samples produced enough cells to cellularize a 3.5 by 0.5 cm2 graft scaffold at low cell density (~ 7000 cells/cm2), and 43.75% could cellularize a scaffold at high cell density (~ 100,000 cells/cm2). At passage 2, all samples produced the number of cells required for both recellularization models. Further evaluation revealed that six pediatric samples (11%) and three (50%) adult samples contained basal cells with a squamous basal phenotype. These cells did not form a polarized epithelium or produce differentiated secretory or ciliated cells. In the pediatric population, the squamous basal cell phenotype was associated with degree of prematurity (< 28 weeks, 64% vs. 13%, p = 0.02), significant pulmonary history (83% vs. 34%, p = 0.02), specifically with bronchopulmonary dysplasia (67% vs. 19%, p = 0.01), and patients who underwent previous tracheostomy (67% vs. 23%, p = 0.03).

CONCLUSIONS

In summary, screening high-risk pediatric or adult population based on clinical risk factors and laboratory findings could define appropriate candidates for airway reconstruction with tracheal scaffolds.

LEVEL OF EVIDENCE

Level III Cohort study.

Psidium guajava L. phenolic compound-reinforced lamellar scaffold for tracheal tissue engineering

The aim of this work was to develop a dense lamellar scaffold, as a biomimetic material with potential applications in the regeneration of tracheal tissue after surgical tumor resection. The scaffolds were produced by plastic compression technique, exploiting the use of total phenolic compounds (TPC) from Psidium guajava Linn as a potential cross-linking agent in a polymeric mixture based on collagen (COL), silk fibroin (SF), and polyethylene glycol 400 (PEG 400). Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) confirmed the chemical interactions between the polymers and the cross-linking of TPC between COL and SF. Morphological analyses showed scaffolds with porosity, interconnectivity, and a porous surface structure with a gyroid-like geometry. The analysis of the anisotropic degree resulted in anisotropic structures (0.1% TFC and 0.3% TFC) and an isotropic structure (0.5% TFC). In the mechanical properties, it was evidenced greater resistance for the 0.3% TFC formulation. The addition of TPC percentages did not result in a significant difference (p > 0.05) in swelling capacity and disintegration rate. The results confirmed that TPC were able to modulate the morphological, morphometric, and mechanical properties of scaffolds. Thus, this study describes a potential new material to improve the regeneration of major tracheal structures after surgical tumor removal.

Microinjection Molded Biopolymeric Airway Stent with Antibacterial and Anti-Hyperplastic Properties

Central airway stenosis is a condition that the diameter of the trachea or main bronchus shrinkage is caused by external compression or internal tissue hyperplasia, which can cause difficulty breathing, asphyxia, and even death. Airway stenting is an easy way to restore the patency of the central airway, but airway stents commonly used in clinical practice can lead to complications such as mucus plugging, bacterial infection, and granulation tissue hyperplasia. Moreover, the non-degradable characteristic makes it requires a second operation to remove, which has the potential to cause tissue damage. In this study, a biodegradable airway stent is fabricated by microinjection molding using the bioelastomer of poly (L-lactide-co-ε-caprolactone) as the matrix material. The airway stent has excellent mechanical properties and an appropriate degradation rate. The hydrophilic surface of the airway stent can inhibit mucus plugging. The loading of silver nanoparticles and cisplatin endows the stent with antibacterial and anti-hyperplastic functions. In vitro and in vivo experiments demonstrate that this study provides an antibacterial and anti-hyperplastic biodegradable airway stent with elastic properties to avoid secondary removal operation and reduce complications associated with mucus plugging, bacterial infection, and granulation tissue hyperplasia.

Synergizing Algorithmic Design, Photoclick Chemistry and Multi-Material Volumetric Printing for Accelerating Complex Shape Engineering

The field of biomedical design and manufacturing has been rapidly evolving, with implants and grafts featuring complex 3D design constraints and materials distributions. By combining a new coding-based design and modeling approach with high-throughput volumetric printing, a new approach is demonstrated to transform the way complex shapes are designed and fabricated for biomedical applications. Here, an algorithmic voxel-based approach is used that can rapidly generate a large design library of porous structures, auxetic meshes and cylinders, or perfusable constructs. By deploying finite cell modeling within the algorithmic design framework, large arrays of selected auxetic designs can be computationally modeled. Finally, the design schemes are used in conjunction with new approaches for multi-material volumetric printing based on thiol-ene photoclick chemistry to rapidly fabricate complex heterogeneous shapes. Collectively, the new design, modeling and fabrication techniques can be used toward a wide spectrum of products such as actuators, biomedical implants and grafts, or tissue and disease models.

Current status and future trends of reconstructing a vascularized tissue-engineered trachea

Alternative treatment of long tracheal defects remains one of the challenges faced by thoracic surgeons. Tissue engineering has shown great potential in addressing this regenerative medicine conundrum and the technology to make tracheal grafts using this technique is rapidly maturing, leading to unique therapeutic approaches. However, the clinical application of tissue-engineered tracheal implants is limited by insufficient revascularization. Among them, realizing the vascularization of a tissue-engineered trachea is the most challenging problem to overcome. To achieve long-term survival after tracheal transplantation, an effective blood supply must be formed to support the metabolism of seeded cells and promote tissue healing and regeneration. Otherwise, repeated infection, tissue necrosis, lumen stenosis lack of effective epithelialization, need for repeated bronchoscopy after surgery, and other complications will be inevitable and lead to graft failure and a poor outcome. Here we review and analyze various tissue engineering studies promoting angiogenesis in recent years. The general situation of reconstructing a vascularized tissue-engineered trachea, including current problems and future development trends, is elaborated from the perspectives of seed cells, scaffold materials, growth factors and signaling pathways, surgical interventions in animal models and clinical applications. This review also provides ideas and methods for the further development of better biocompatible tracheal substitutes in the future.

Biomimetic in situ tracheal microvascularization for segmental tracheal reconstruction in one-step

Formation of functional and perfusable vascular network is critical to ensure the long-term survival and functionality of the engineered tissue tracheae after transplantation. However, the greatest challenge in tracheal-replacement therapy is the promotion of tissue regeneration by rapid graft vascularization. Traditional prevascularization methods for tracheal grafts typically utilize omentum or muscle flap wrapping, which requires a second operation; vascularized segment tracheal orthotopic transplantation in one step remains difficult. This study proposes a method to construct a tissue-engineered tracheal graft, which directly forms the microvascular network after orthotopic transplantation in vivo. The focus of this study was the preparation of a hybrid tracheal graft that is non-immunogenic, has good biomechanical properties, supports cell proliferation, and quickly vascularizes. The results showed that vacuum-assisted decellularized trachea-polycaprolactone hybrid scaffold could match most of the above requirements as closely as possible. Furthermore, endothelial progenitor cells (EPCs) were extracted and used as vascularized seed cells and seeded on the surfaces of hybrid grafts before and during the tracheal orthotopic transplantation. The results showed that the microvascularized tracheal grafts formed maintained the survival of the recipient, showing a satisfactory therapeutic outcome. This is the first study to utilize EPCs for microvascular construction of long-segment trachea in one-step; the approach represents a promising method for microvascular tracheal reconstruction.

Comparison of the biological properties between 3D-printed and decellularized tracheal grafts

This study sought to characterize the differences between the 3D-printed and decellularized tracheal grafts, providing the basis for the synthesis of the more reasonable and effective tissue-engineered trachea. We compared the biomechanical properties and biocompatibility of the 3D-printed tracheal graft and decellularized tracheal graft in vitro and evaluated the biocompatibility, immune rejection and inflammation of the two materials through in vivo implantation experiments. Compared with the decellularized tracheal graft, the 3D-printed tracheal graft was associated with obviously higher biomechanical properties. The results demonstrated enhanced growth of BMSCs in the decellularized tracheal graft compared to the 3D-printed one when co-culture with two tracheal graft groups. Moreover, the CCK-8 assay demonstrated significant cell proliferation on the decellularized tracheal graft. Serum IgG and IgM measured in vivo by implantation testing indicated that the 3D-Printed tracheal graft exhibited the most significant inflammatory response. HE staining indicated that the inflammatory response in the 3D-printed tracheal graft consisted mainly of eosinophils, while little inflammatory cell infiltrates were observed in the decellularized tracheal graft. CD68 immunohistochemical analysis indicated that the infiltration of macrophages was not significant in both tracheal grafts. Our findings suggest that the biomechanical properties of the 3D-printed tracheal grafts are better than the decellularized tracheal grafts. Nonetheless, the decellularized tracheal graft exhibited better biocompatibility than the 3D-printed tracheal graft.

Identification of TEKTIN1-expressing multiciliated cells during spontaneous differentiation of non-human primate embryonic stem cells

Tektins are a group of microtubule-stabilizing proteins necessary for cilia and flagella assembly. TEKTIN1 (TEKT1) is used as a sperm marker for monitoring germ cell differentiation in embryonic stem (ES) and induced pluripotent stem (iPS) cells. Although upregulation of TEKT1 has been reported during spontaneous differentiation of ES and iPS cells, it is unclear which cells express TEKT1. To identify TEKT1-expressing cells, we established an ES cell line derived from cynomolgus monkeys (Macaca fascicularis), which expresses Venus controlled by the TEKT1 promoter. Venus expression was detected at 5 weeks of differentiation on the surface of the embryoid body (EB), and it gradually increased with the concomitant formation of a leash-like structure at the EB periphery. Motile cilia were observed on the surface of the Venus-positive leash-like structure after 8 weeks of differentiation. The expression of cilia markers as well as TEKT1-5 and 9 + 2 microtubule structures, which are characteristic of motile cilia, were detected in Venus-positive cells. These results demonstrated that TEKT1-expressing cells are multiciliated epithelial-like cells that form a leash-like structure during the spontaneous differentiation of ES and iPS cells. These findings will provide a new research strategy for studying cilia biology, including ciliogenesis and ciliopathies.

Regenerative medicine: current research and perspective in pediatric surgery

The field of regenerative medicine, encompassing several disciplines including stem cell biology and tissue engineering, continues to advance with the accumulating research on cell manipulation technologies, gene therapy and new materials. Recent progress in preclinical and clinical studies may transcend the boundaries of regenerative medicine from laboratory research towards clinical reality. However, for the ultimate goal to construct bioengineered transplantable organs, a number of issues still need to be addressed. In particular, engineering of elaborate tissues and organs requires a fine combination of different relevant aspects; not only the repopulation of multiple cell phenotypes in an appropriate distribution but also the adjustment of the host environmental factors such as vascularisation, innervation and immunomodulation. The aim of this review article is to provide an overview of the recent discoveries and development in stem cells and tissue engineering, which are inseparably interconnected. The current status of research on tissue stem cells and bioengineering, and the possibilities for application in specific organs relevant to paediatric surgery have been specifically focused and outlined.

Functional Trachea Reconstruction Using 3D-Bioprinted Native-Like Tissue Architecture Based on Designable Tissue-Specific Bioinks

Functional segmental trachea reconstruction remains a remarkable challenge in the clinic. To date, functional trachea regeneration with alternant cartilage-fibrous tissue-mimetic structure similar to that of the native trachea relying on the three-dimensional (3D) bioprinting technology has seen very limited breakthrough. This fact is mostly due to the lack of tissue-specific bioinks suitable for both cartilage and vascularized fibrous tissue regeneration, as well as the need for firm interfacial integration between stiff and soft tissues. Here, a novel strategy is developed for 3D bioprinting of cartilage-vascularized fibrous tissue-integrated trachea (CVFIT), utilizing photocrosslinkable tissue-specific bioinks. Both cartilage- and fibrous tissue-specific bioinks created by this study provide suitable printability, favorable biocompatibility, and biomimetic microenvironments for chondrogenesis and vascularized fibrogenesis based on the multicomponent synergistic effect through the hybrid photoinitiated polymerization reaction. As such, the tubular analogs are successfully bioprinted and the ring-to-ring alternant structure is tightly integrated by the enhancement of interfacial bonding through the amidation reaction. The results from both the trachea regeneration and the in situ trachea reconstruction demonstrate the satisfactory tissue-specific regeneration along with realization of mechanical and physiological functions. This study thus illustrates the 3D-bioprinted native tissue-like trachea as a promising alternative for clinical trachea reconstruction.

Additive manufacturing in respiratory sciences - Current applications and future prospects

Additive Manufacturing (AM) comprises a variety of techniques that enable fabrication of customised objects with specific attributes. The versatility of AM procedures and constant technological improvements allow for their application in the development of medicinal products and medical devices. This review provides an overview of AM applications related to respiratory sciences. For this purpose, both fields of research are briefly introduced and the potential benefits of integrating AM to respiratory sciences at different levels of pharmaceutical development are highlighted. Tailored manufacturing of microstructures as a particle design approach in respiratory drug delivery will be discussed. At the dosage form level, we exemplify AM as an important link in the iterative loop of data driven inhaler design, rapid prototyping and in vitro testing. This review also presents the application of bioprinting in the respiratory field for design of biorelevant in vitro cellular models, followed by an overview of AM-related processes in preventive and therapeutic care. Finally, this review discusses future prospects of AM as a component in a digital health environment.

Decellularized Wharton Jelly Implants Do Not Trigger Collagen and Cartilaginous Tissue Production in Tracheal Injury in Rabbits

BACKGROUND

Tracheal lesions are pathologies derived from the most diverse insults that can result in a fatal outcome. Despite the number of techniques designed for the treatment, a limiting factor is the extent of the extraction. Therefore, strategies with biomaterials can restructure tissues and maintain the organ's functionality, like decellularized Wharton's jelly (WJ) as a scaffold. The aim is to analyze the capacity of tracheal tissue regeneration after the implantation of decellularized WJ in rabbits submitted to a tracheal defect.

METHODS

An in vivo experimental study was undertaken using twenty rabbits separated into two groups (n = 10). Group 1 submitted to a tracheal defect, group 2 tracheal defect, and implantation of decellularized WJ. The analyses were performed 30 days after surgery through immunohistochemistry.

RESULTS

Inner tracheal area diameter (p = 0.643) didn't show significance. Collagen type I, III, and Aggrecan highlighted no significant difference between the groups (both collagens with p = 0.445 and the Aggrecan p = 0.4).

CONCLUSION

The scaffold appears to fit as a heterologous implant and did not trigger reactions such as rejection or extrusion of the material into the recipient. However, these results suggested that although the WJ matrix presents several characteristics as a biomaterial for tissue regeneration, it did not display histopathological benefits in trachea tissue regeneration.

Bone Marrow Derived Mesenchymal Stromal Cells Promote Vascularization and Ciliation in Airway Mucosa Tri-Culture Models in Vitro

Patients suffering from irresectable tracheal stenosis often face limited treatment options associated with low quality of life. To date, an optimal tracheal replacement strategy does not exist. A tissue-engineered tracheal substitute promises to overcome limitations such as implant vascularization, functional mucociliary clearance and mechanical stability. In order to advance a tracheal mucosa model recently developed by our group, we examined different supporting cell types in fibrin-based tri-culture with primary human umbilical vein endothelial cells (HUVEC) and primary human respiratory epithelial cells (HRE). Bone marrow-derived mesenchymal stromal cells (BM-MSC), adipose-derived mesenchymal stromal cells (ASC) and human nasal fibroblasts (HNF) were compared regarding their ability to promote mucociliary differentiation and vascularization in vitro. Three-dimensional co-cultures of the supporting cell types with either HRE or HUVEC were used as controls. Mucociliary differentiation and formation of vascular-like structures were analyzed by scanning electron microscopy (SEM), periodic acid Schiff’s reaction (PAS reaction), two-photon laser scanning microscopy (TPLSM) and immunohistochemistry. Cytokine levels of vascular endothelial growth factor (VEGF), epidermal growth factor (EGF), interleukin-6 (IL6), interleukin-8 (IL8), angiopoietin 1, angiopoietin 2, fibroblast growth factor basic (FGF-b) and placenta growth factor (PIGF) in media supernatant were investigated using LEGENDplex™ bead-based immunoassay. Epithelial morphology of tri-cultures with BM-MSC most closely resembled native respiratory epithelium with respect to ciliation, mucus production as well as expression and localization of epithelial cell markers pan-cytokeratin, claudin-1, α-tubulin and mucin5AC. This was followed by tri-cultures with HNF, while ASC-supported tri-cultures lacked mucociliary differentiation. For all supporting cell types, a reduced ciliation was observed in tri-cultures compared to the corresponding co-cultures. Although formation of vascular-like structures was confirmed in all cultures, vascular networks in BM-MSC-tri-cultures were found to be more branched and extended. Concentrations of pro-angiogenic and inflammatory cytokines, in particular VEGF and angiopoietin 2, revealed to be reduced in tri-cultures compared to co-cultures. With these results, our study provides an important step towards a vascularized and ciliated tissue-engineered tracheal replacement. Additionally, our tri-culture model may in the future contribute to an improved understanding of cell-cell interactions in diseases associated with impaired mucosal function.

Tracheal reconstruction with pedicled tandem grafts engineered by a radial stretch bioreactor

The engineering of tracheal substitutes is pivotal in improving tracheal reconstruction. In this study, we aimed to investigate the effects of biomechanical stimulation on tissue engineering tracheal cartilage by mimicking the trachea motion through a novel radial stretching bioreactor, which enables to dynamically change the diameter of the hollow cylindrical implants. Applying our bioreactor, we demonstrated that chondrocytes seeded on the surface of Poly (ε-caprolactone) scaffold respond to mechanical stimulation by improvement of infiltration into implants and upregulation of cartilage-specific genes. Further, the mechanical stimulation enhanced the accumulation of cartilage neo-tissues and cartilage-specific extracellular macromolecules in the muscle flap-remodeled implants and reconstructed trachea. Nevertheless, the invasion of fibrous tissues in the reconstructed trachea was suppressed upon mechanical loading.

Central airway obstruction: is it time to move forward?

INTRODUCTION

Central airway obstruction (CAO) represents a pathological condition that can lead to airflow limitation of the trachea, main stem bronchi, bronchus intermedius or lobar bronchus.

MAIN BODY

It is a common clinical situation consensually considered under-diagnosed. Management of patients with CAO can be difficult and deciding on the best treatment approach represents a medical challenge. This work intends to review CAO classifications, causes, treatments and its therapeutic limitations, approaching benign and malign presentations. Three illustrative cases are further presented, supporting the clinical problem under review.

CONCLUSION

Management of CAO still remains a challenge. The available options are not always effective nor free from complications. A new generation of costume-tailored airway stents, associated with stem cell-based therapy, could be an option in specific clinical situations.

Biomimetic Trachea Engineering via a Modular Ring Strategy Based on Bone-Marrow Stem Cells and Atelocollagen for Use in Extensive Tracheal Reconstruction

The fabrication of biomimetic tracheas with a architecture of cartilaginous rings alternately interspersed between vascularized fibrous tissue (CRVFT) has the potential to perfectly recapitulate the normal tracheal structure and function. Herein, the development of a customized chondroitin-sulfate-incorporating type-II atelocollagen (COL II/CS) scaffold with excellent chondrogenic capacity and a type-I atelocollagen (COL I) scaffold to facilitate the formation of vascularized fibrous tissue is described. An efficient modular ring strategy is then adopted to develop a CRVFT-based biomimetic trachea. The in vitro engineering of cartilaginous rings is achieved via the recellularization of ring-shaped COL II/CS scaffolds using bone marrow stem cells as a mimetic for native cartilaginous ring tissue. A CRVFT-based trachea with biomimetic mechanical properties, composed of bionic biochemical components, is additionally successfully generated in vivo via the alternating stacking of cartilaginous rings and ring-shaped COL I scaffolds on a silicone pipe. The resultant biomimetic trachea with pedicled muscular flaps is used for extensive tracheal reconstruction and exhibits satisfactory therapeutic outcomes with structural and functional properties similar to those of native trachea. This is the first study to utilize stem cells for long-segmental tracheal cartilaginous regeneration and this represents a promising method for extensive tracheal reconstruction.

Radiofrequency ablation of recurrent thyroid cancers: anatomy-based management

Although differentiated thyroid cancer has an excellent prognosis and low mortality, its recurrence rate has been reported to be very high. While surgery is recommended as the standard treatment for recurrent thyroid cancer, reoperation may increase the incidence of complications due to fibrosis and anatomical distortion. In patients with high surgical risk or those who refuse repeated surgery, ultrasonography-guided ablation techniques including radiofrequency ablation, ethanol ablation, and laser ablation are suggested as alternative treatments. In this manuscript, we introduce an anatomy-based management concept for radiofrequency ablation for recurrent thyroid cancer, and present a review of the relevant literature, including indications, basic techniques, clinical outcomes, and complications.

3D bioprinting of a trachea-mimetic cellular construct of a clinically relevant size

Despite notable advances in extrusion-based 3D bioprinting, it remains a challenge to create a clinically-sized cellular construct using extrusion-based 3D printing due to long printing times adversely affecting cell viability and functionality. Here, we present an advanced extrusion-based 3D bioprinting strategy composed of a two-step printing process to facilitate creation of a trachea-mimetic cellular construct of clinically relevant size. A porous bellows framework is first printed using typical extrusion-based 3D printing. Selective printing of cellular components, such as cartilage rings and epithelium lining, is then performed on the outer grooves and inner surface of the bellows framework by a rotational printing process. With this strategy, 3D bioprinting of a trachea-mimetic cellular construct of clinically relevant size is achieved in significantly less total printing time compared to a typical extrusion-based 3D bioprinting strategy which requires printing of an additional sacrificial material. Tracheal cartilage formation was successfully demonstrated in a nude mouse model through a subcutaneous implantation study of trachea-mimetic cellular constructs wrapped with a sinusoidal-patterned tubular mesh preventing rapid resorption of cartilage rings in vivo. This two-step 3D bioprinting for a trachea-mimetic cellular construct of clinically relevant size can provide a fundamental step towards clinical translation of 3D bioprinting based tracheal reconstruction.

Isolation of multipotent progenitor cells from pleura and pericardium for tracheal tissue engineering purposes

Tissue engineering (TE) of long tracheal segments is conceptually appealing for patients with inoperable tracheal pathology. In tracheal TE, stem cells isolated from bone marrow or adipose tissue have been employed, but the ideal cell source has yet to be determined. When considering the origin of stem cells, cells isolated from a source embryonically related to the trachea may be more similar. In this study, we investigated the feasibility of isolating progenitor cells from pleura and pericard as an alternative cells source for tracheal tissue engineering. Porcine progenitor cells were isolated from pleura, pericard, trachea and adipose tissue and expanded in culture. Isolated cells were characterized by PCR, RNA sequencing, differentiation assays and cell survival assays and were compared to trachea and adipose‐derived progenitor cells. Progenitor‐like cells were successfully isolated and expanded from pericard and pleura as indicated by gene expression and functional analyses. Gene expression analysis and RNA sequencing showed a stem cell signature indicating multipotency, albeit that subtle differences between different cell sources were visible. Functional analysis revealed that these cells were able to differentiate towards chondrogenic, osteogenic and adipogenic lineages. Isolation of progenitor cells from pericard and pleura with stem cell features is feasible. Although functional differences with adipose‐derived stem cells were limited, based on their gene expression, pericard‐ and pleura‐derived stem cells may represent a superior autologous cell source for cell seeding in tracheal tissue engineering.

Preventing Biofilm Formation and Development on Ear, Nose and Throat Medical Devices

Otorhinolaryngology is a vast domain that requires the aid of many resources for optimal performance. The medical devices utilized in this branch share common problems, such as the formation of biofilms. These structured communities of microbes encased in a 3D matrix can develop antimicrobial resistance (AMR), thus making it a problem with challenging solutions. Therefore, it is of concern the introduction in the medical practice involving biomaterials for ear, nose and throat (ENT) devices, such as implants for the trachea (stents), ear (cochlear implants), and voice recovery (voice prosthetics). The surface of these materials must be biocompatible and limit the development of biofilm while still promoting regeneration. In this respect, several surface modification techniques and functionalization procedures can be utilized to facilitate the success of the implants and ensure a long time of use. On this note, this review provides information on the intricate underlying mechanisms of biofilm formation, the large specter of implants and prosthetics that are susceptible to microbial colonization and subsequently related infections. Specifically, the discussion is particularized on biofilm development on ENT devices, ways to reduce it, and recent approaches that have emerged in this field.

A Comprehensive Review on the Applications of Exosomes and Liposomes in Regenerative Medicine and Tissue Engineering

Tissue engineering and regenerative medicine are generally concerned with reconstructing cells, tissues, or organs to restore typical biological characteristics. Liposomes are round vesicles with a hydrophilic center and bilayers of amphiphiles which are the most influential family of nanomedicine. Liposomes have extensive research, engineering, and medicine uses, particularly in a drug delivery system, genes, and vaccines for treatments. Exosomes are extracellular vesicles (EVs) that carry various biomolecular cargos such as miRNA, mRNA, DNA, and proteins. As exosomal cargo changes with adjustments in parent cells and position, research of exosomal cargo constituents provides a rare chance for sicknesses prognosis and care. Exosomes have a more substantial degree of bioactivity and immunogenicity than liposomes as they are distinctly chiefly formed by cells, which improves their steadiness in the bloodstream, and enhances their absorption potential and medicinal effectiveness in vitro and in vivo. In this review, the crucial challenges of exosome and liposome science and their functions in disease improvement and therapeutic applications in tissue engineering and regenerative medicine strategies are prominently highlighted.

Current Strategies for Tracheal Replacement: A Review

Airway cancers have been increasing in recent years. Tracheal resection is commonly performed during surgery and is burdened from post-operative complications severely affecting quality of life. Tracheal resection is usually carried out in primary tracheal tumors or other neoplasms of the neck region. Regenerative medicine for tracheal replacement using bio-prosthesis is under current research. In recent years, attempts were made to replace and transplant human cadaver trachea. An effective vascular supply is fundamental for a successful tracheal transplantation. The use of biological scaffolds derived from decellularized tissues has the advantage of a three-dimensional structure based on the native extracellular matrix promoting the perfusion, vascularization, and differentiation of the seeded cell typologies. By appropriately modulating some experimental parameters, it is possible to change the characteristics of the surface. The obtained membranes could theoretically be affixed to a decellularized tissue, but, in practice, it needs to ensure adhesion to the biological substrate and/or glue adhesion with biocompatible glues. It is also known that many of the biocompatible glues can be toxic or poorly tolerated and induce inflammatory phenomena or rejection. In tissue and organ transplants, decellularized tissues must not produce adverse immunological reactions and lead to rejection phenomena; at the same time, the transplant tissue must retain the mechanical properties of the original tissue. This review describes the attempts so far developed and the current lines of research in the field of tracheal replacement.

Airway ciliated cells regenerated on collagen sponge implants acquire planar polarities towards nearby edges of implanted areas

Tissue-engineered tracheae have been developed to replace defective tracheae. However, the direction of ciliated cells in the regenerated epithelium remains unclear. We investigated planar polarity formed in the regenerated airway epithelium after tracheal graft implantation. We partially resected the rat trachea and implanted a collagen scaffold. The direction of the basal foot was assessed by transmission electron microscopy. Immunofluorescence staining was performed to examine the biased distribution of Vangl1 and Frizzled6 proteins. The direction of mucociliary transport was analyzed by video microscopy. Our results showed that the basal feet of cilia in the proximal and distal regions of the implanted areas were respectively oriented toward the proximal and distal directions. The biased distribution of Vangl1 and Frizzled6, and the directions of mucociliary transport showed that planar polarities formed in the regenerated epithelium were oriented toward the proximal, distal, left, and right directions in the proximal, distal, left, and right regions of the implanted area. These polarities persisted until nine months after implantation. Hence, the results suggest that planar polarities formed in epithelia regenerated on tracheal grafts are directed toward the nearby edges of implanted areas and are preserved for a prolonged period. The polarities can, at least partially, contribute to clearing external materials from the implanted areas by transporting them to a normal region.

Improved chondrogenic performance with protective tracheal design of Chitosan membrane surrounding 3D-printed trachea

In recent tracheal tissue engineering, limitations in cartilage reconstruction, caused by immature delivery of chondrocyte-laden components, have been reported beyond the complete epithelialization and integration of the tracheal substitutes with the host tissue. In an attempt to overcome such limitations, this article introduces a protective design of tissue-engineered trachea (TraCHIM) composed of a chitosan-based nanofiber membrane (CHIM) and a 3D-printed biotracheal construct. The CHIM was created from chitosan and polycaprolactone (PCL) using an electrospinning process. Upon addition of chitosan to PCL, the diameter of electrospun fibers became thinner, allowing them to be stacked more closely, thereby improving its mechanical properties. Chitosan also enhances the hydrophilicity of the membranes, preventing them from slipping and delaminating over the cell-laden bioink of the biotracheal graft, as well as protecting the construct. Two weeks after implantation in Sprague–Dawley male rats, the group with the TraCHIM exhibited a higher number of chondrocytes, with enhanced chondrogenic performance, than the control group without the membrane. This study successfully demonstrates enhanced chondrogenic performance of TraCHIM in vivo. The protective design of TraCHIM opens a new avenue in engineered tissue research, which requires faster tissue formation from 3D biodegradable materials, to achieve complete replacement of diseased tissue.

Standardization of Microcomputed Tomography for Tracheal Tissue Engineering Analysis

Tracheal tissue engineering has become an active area of interest among clinical and scientific communities; however, methods to evaluate success of in vivo tissue-engineered solutions remain primarily qualitative. These evaluation methods have generally relied on the use of photographs to qualitatively demonstrate tracheal patency, endoscopy to image healing over time, and histology to determine the quality of the regenerated extracellular matrix. Although those generally qualitative methods are valuable, they alone may be insufficient. Therefore, to quantitatively assess tracheal regeneration, we recommend the inclusion of microcomputed tomography (μCT) to quantify tracheal patency as a standard outcome analysis. To establish a standard of practice for quantitative μCT assessment for tracheal tissue engineering, we recommend selecting a constant length to quantify airway volume. Dividing airway volumes by a constant length provides an average cross-sectional area for comparing groups. We caution against selecting a length that is unjustifiably large, which may result in artificially inflating the average cross-sectional area and thereby diminishing the ability to detect actual differences between a test group and a healthy control. Therefore, we recommend selecting a length for μCT assessment that corresponds to the length of the defect region. We further recommend quantifying the minimum cross-sectional area, which does not depend on the length, but has functional implications for breathing. We present empirical data to elucidate the rationale for these recommendations. These empirical data may at first glance appear as expected and unsurprising. However, these standard methods for performing μCT and presentation of results do not yet exist in the literature, and are necessary to improve reporting within the field. Quantitative analyses will better enable comparisons between future publications within the tracheal tissue engineering community and empower a more rigorous assessment of results. Impact statement The current study argues for the standardization of microcomputed tomography (μCT) as a quantitative method for evaluating tracheal tissue-engineered solutions in vivo or ex vivo. The field of tracheal tissue engineering has generally relied on the use of qualitative methods for determining tracheal patency. A standardized quantitative evaluation method currently does not exist. The standardization of μCT for evaluation of in vivo studies would enable a more robust characterization and allow comparisons between groups within the field. The impact of standardized methods within the tracheal tissue engineering field as presented in the current study would greatly improve the quality of published work.

Photocrosslinked natural hydrogel composed of hyaluronic acid and gelatin enhances cartilage regeneration of decellularized trachea matrix

Repair of long segmental trachea defects is always a great challenge in the clinic. The key to solving this problem is to develop an ideal trachea substitute with biological function. Using of a decellularized trachea matrix based on laser micropore technique (LDTM) demonstrated the possibility of preparing ideal trachea substitutes with tubular shape and satisfactory cartilage regeneration for tissue-engineered trachea regeneration. However, as a result of the very low cell adhesion of LDTM, an overly high concentration of seeding cell is required, which greatly restricts its clinical translation. To address this issue, the current study proposed a novel strategy using a photocrosslinked natural hydrogel (PNH) carrier to enhance cell retention efficiency and improve tracheal cartilage regeneration. Our results demonstrated that PNH underwent a rapid liquid-solid phase conversion under ultraviolet light. Moreover, the photo-generated aldehyde groups in PNH could rapidly react with inherent amino groups on LDTM surfaces to form imine bonds, which efficiently immobilized the cell-PNH composite to the surfaces of LDTM and/or maintained the composite in the LDTM micropores. Therefore, PNH significantly enhanced cell-seeding efficiency and achieved both stable cell retention and homogenous cell distribution throughout the LDTM. Moreover, PNH exhibited excellent biocompatibility and low cytotoxicity, and provided a natural three-dimensional biomimetic microenvironment to efficiently promote chondrocyte survival and proliferation, extracellular matrix production, and cartilage regeneration. Most importantly, at a relatively low cell-seeding concentration, homogeneous tubular cartilage was successfully regenerated with an accurate tracheal shape, sufficient mechanical strength, good elasticity, typical lacuna structure, and cartilage-specific extracellular matrix deposition. Our findings establish a versatile and efficient cell-seeding strategy for regeneration of various tissue and provide a satisfactory trachea substitute for repair and functional reconstruction of long segmental tracheal defects.

Biomimetic Hybrid Systems for Tissue Engineering

Tissue engineering approaches appear nowadays highly promising for the regeneration of injured/diseased tissues. Biomimetic scaffolds are continuously been developed to act as structural support for cell growth and proliferation as well as for the delivery of cells able to be differentiated, and also of bioactive molecules like growth factors and even signaling cues. The current research concerns materials employed to develop biological scaffolds with improved features as well as complex preparation techniques. In this work, hybrid systems based on natural polymers are discussed and the efforts focused to provide new polymers able to mimic proteins and DNA are extensively explained. Progress on the scaffold fabrication technique is mentioned, those processes based on solution and melt electrospinning or even on their combination being mainly discussed. Selection of the appropriate hybrid technology becomes vital to get optimal architecture to reasonably accomplish the final applications. Representative examples of the recent possibilities on tissue regeneration are finally given.