A comparative study of seeding techniques and three-dimensional matrices for mesenchymal cell attachment

Differentiation of human endometrial mesenchymal cells to epithelial and stromal cells by seeding on the decellularized endometrial scaffold

This study aimed to construct the endometrial-like structure by co-culturing of human mesenchymal endometrial cells and uterine smooth muscle cells in the decellularized scaffold. After decellularization of the human endometrium, cell seeding was performed by centrifugation of human mesenchymal endometrial cells with different speeds and times in 15 experimental subgroups. Analysis of residual cell count in suspension was done in all subgroups and the method with the lower number of suspended cells was selected for subsequent study. Then, the human endometrial mesenchymal cells and the myometrial muscle cells were seeded on the decellularized tissue and cultured for 1 wk; then, differentiation of the seeded cells was assessed by morphological and gene expression analysis. The cell seeding method by centrifuging at 6020 g for 2 min showed the highest number of seeded cells and the lowest number of residual cells in suspension. In the recellularized scaffold, the endometrial-like was seen with some protrusions on their surface and the stromal cells had shown spindle and polyhedral morphology. The myometrial cells almost were homed at the periphery of the scaffold and mesenchymal cells penetrated in deeper parts similar to their arrangement in the native uterus. The more expression of endometrial-related genes such as SPP1, MMP2, ZO-1, LAMA2, and COL4A1 and low-level expression of the OCT4 gene as a pluripotency marker confirmed the differentiation of seeded cells. Endometrial-like structures were formed by the co-culturing of human endometrial mesenchymal cells and smooth muscle cells on the decellularized endometrium.

Effects of cell seeding technique and cell density on BMP-2 production in transduced human mesenchymal stem cells

Small animal models have demonstrated the efficacy of ex vivo regional gene therapy using scaffolds loaded with BMP-2-expressing mesenchymal stem cells (MSCs). Prior to clinical translation, optimization of seeding techniques of the transduced cells will be important to minimize time and resource expenditure, while maximizing cell delivery and BMP-2 production. No prior studies have investigated cell-seeding techniques in the setting of transduced cells for gene therapy applications. Using BMP-2-expressing transduced adipose-derived MSCs and a porous ceramic scaffold, this study compared previously described static and dynamic seeding techniques with respect to cell seeding efficiency, uniformity of cell distribution, and in vitro BMP-2 production. Static and negative pressure seeding techniques demonstrated the highest seeding efficiency, while orbital shaking was associated with the greatest increases in BMP-2 production per cell. Low density cell suspensions were associated with the highest seeding efficiency and uniformity of cell distribution, and the greatest increases in BMP-2 production from 2 to 7 days after seeding. Our results highlight the potential for development of an optimized cell density and seeding technique that could greatly reduce the number of MSCs needed to produce therapeutic BMP-2 levels in clinical situations. Further studies are needed to investigate in vivo effects of cell seeding techniques on bone healing.

Bio-electrospraying assessment toward in situ chondrocyte-laden electrospun scaffold fabrication

Electrospinning has been widely used to fabricate fibrous scaffolds for cartilage tissue engineering, but their small pores severely restrict cell infiltration, resulting in an uneven distribution of cells across the scaffold, particularly in three-dimensional designs. If bio-electrospraying is applied, direct chondrocyte incorporation into the fibers during electrospinning may be a solution. However, before this approach can be effectively employed, it is critical to identify whether chondrocytes are adversely affected. Several electrospraying operating settings were tested to determine their effect on the survival and function of an immortalized human chondrocyte cell line. These chondrocytes survived through an electric field formed by low needle-to-collector distances and low voltage. No differences in chondrocyte viability, morphology, gene expression, or proliferation were found. Preliminary data of the combination of electrospraying and polymer electrospinning disclosed that chondrocyte integration was feasible using an alternated approach. The overall increase in chondrocyte viability over time indicated that the embedded cells retained their proliferative capacity. Besides the cell line, primary chondrocytes were also electrosprayed under the previously optimized operational conditions, revealing the higher sensitivity degree of these cells. Still, their post-electrosprayed viability remained considerably high. The data reported here further suggest that bio-electrospraying under the optimal operational conditions might be a promising alternative to the existent cell seeding techniques, promoting not only cells safe delivery to the scaffold, but also the development of cellularized cartilage tissue constructs.

Success and efficiency of cell seeding in Avian Tendon Xenografts - A promising alternative for tendon and ligament reconstruction

Decellularized tendon xenografts offer a promising alternative for reconstruction by using ubiquitously available material. This study compares static and centrifugal seeding of avian tendon scaffolds with NIH 3T3 fibroblasts. Incorporation of viable cells was achievable with both techniques, represented by DNA content. Proliferation rate and viability assay showed neither damage by centrifugal force nor superiority of the technique. Cell proliferation after 10 days of culture demonstrated that the scaffold did not hinder 3-D culturing. Confocal laser microscopy revealed structural details as formation of focal adhesions, to provide deeper insight into the process of cell attachment and growth in xenografts.

Biocompatibility of allogenic canine fascia lata: In vitro evaluation and small case series

OBJECTIVE

To evaluate the biocompatibility of canine fascia lata (FL) in vitro and after FL allograft implantation in dogs with clinical disease.

STUDY DESIGN

In vitro experiment and small case series.

SAMPLE POPULATION

Six dogs treated with allogenic freeze-dried FL.

METHODS

Fibroblasts were cultured on disks of FL, polypropylene mesh (PM; negative control), and porcine small intestinal submucosa (SIS; positive control). Constructs were compared at 3, 7, and 14 days for water content, DNA amounts, scanning electron microscopy, and histology. Records of dogs treated with FL allografts with follow-up examination were reviewed for signalment, indication for surgery, surgical procedure, and outcomes. All owners were invited to complete a standardized questionnaire for long-term follow-up.

RESULTS

Water content was greater in FL and SIS than in PM (P = .03). Fascia lata constructs contained more DNA compared with PM constructs at days 7 and 14 (P < .05), whereas SIS constructs did not differ from FL or PM. Fibroblasts appeared spherical and distributed throughout FL constructs, whereas they appeared stellate and remained on the surface of SIS and PM. Fascia lata allografts were implanted in six dogs with surgical conditions. No incisional complications were noted. All dogs had good to excellent long-term outcomes, except one that experienced recurrence of a perineal hernia 2 years after repair.

CONCLUSION

In vitro, canine FL allowed attachment and proliferation of fibroblasts throughout layers of the graft. Canine allogenic FL was clinically well tolerated in this small population of dogs.

CLINICAL SIGNIFICANCE

Allogenic FL is biocompatible and can be considered an alternative to SIS for soft tissue augmentation in dogs.

An Image-Guided Intrascaffold Cell Assembly Technique for Accurate Printing of Heterogeneous Tissue Constructs

For tissue engineering and regenerative medicine, creating thick and heterogeneous scaffold-based tissue constructs requires deep and precise multicellular deposition. Traditional cell seeding strategies lack the ability to create multicellular tissue constructs with high cell penetration and distribution, while emerging strategies aim to simultaneously combine cell-laden tissue segments with scaffold fabrication. Here we describe a technique that allows for three-dimensional (3D) intrascaffold cell assembly in which scaffolds are prefabricated and pretreated, followed by accurate cell distribution within the scaffold using an image-guided technique. This two-step process yields less limitation in scaffold material choice as well as additional treatments, provides accurate cell distribution, and has less potential to harm cells. The image processing technique captures a 2D geometric image of the scaffold, followed by a series of processes, mainly including grayscale transformation, threshold segmentation, and boundary extraction, to ultimately locate scaffold macropore centroids. Coupled with camera calibration data, accurate 3D cell assembly pathway plans can be made. Intrascaffold assembly parameter optimization and complex intrascaffold gradient, multidirectional, and vascular structure assembly were studied. Demonstration was also made with path planning and cell assembly experiments using NIH3T3-cell-laden hydrogels and collagen-coated poly(lactic-co-glycolic acid) (PLGA) scaffolds. Experiments with CellTracker fluorescent monitoring, live/dead staining, and phalloidin-F-actin/DAPI immunostaining and comparison with two control groups (bioink manual injection and cell suspension static surface pipetting) showed accurate cell distribution and positioning and high cell viability (>93%). The PrestoBlue assay showed obvious cell proliferation over seven culture days in vitro. This technique provides an accurate method to aid simple and complex cell colonization with variant depth within 3D-scaffold-based constructs using multiple cells. The modular method can be used with any existing printing platform and shows potential in facilitating direct spatial organization and hierarchal 3D assembly of multiple cells and/or drugs within scaffolds for further tissue engineering studies and clinical applications.

A Simple Dynamic Strategy to Deliver Stem Cells to Decellularized Nerve Allografts

BACKGROUND

The addition of adipose-derived mesenchymal stromal cells to decellularized nerve allografts may improve outcomes of nerve reconstruction. Prior techniques used for cell seeding are traumatic to both the mesenchymal stromal cells and nerve graft. An adequate, reliable, and validated cell seeding technique is an essential step for evaluating the translational utility of mesenchymal stromal cell-enhanced decellularized nerve grafts. The purpose of this study was to develop a simple seeding strategy with an optimal seeding duration.

METHODS

A dynamic bioreactor was used to seed rat and human mesenchymal stromal cells separately onto rat and human decellularized nerve allografts. Cell viability was evaluated by MTS assays and cellular topology after seeding was determined by scanning electron microscopy. Cell density and distribution were determined by Live/Dead assays and Hoechst staining at four different time points (6, 12, 24, and 72 hours). The validity and reliability of the seeding method were calculated.

RESULTS

Cells remained viable at all time points, and mesenchymal stromal cells exhibited exponential growth in the first 12 hours of seeding. Seeding efficiency increased significantly from 79.5 percent at 6 hours to 89.2 percent after 12 hours of seeding (p = 0.004). Both intrarater reliability (r = 0.97) and interrater reliability (r = 0.92) of the technique were high.

CONCLUSIONS

This study describes and validates a new method of effectively seeding decellularized nerve allografts with mesenchymal stromal cells. This method is reproducible, distributes cells homogenously over the graft, and does not traumatize the intraneural architecture of the allograft. Use of this validated seeding technique will permit critical comparison of graft outcomes.

Tailoring the subchondral bone phase of a multi-layered osteochondral construct to support bone healing and a cartilage analog

Focal chondral and osteochondral defects create significant pain and disability for working-aged adults. Current osteochondral repair grafts are limited in availability and often fail due to insufficient osseous support and integration. Thus, a need exists for an off-the-shelf osteochondral construct with the propensity to overcome these shortcomings. Herein, a scalable process was used to develop a multi-layered osteochondral graft with a subchondral bone (ScB) phase tailored to support bone healing and integration. Multiple ScB formulations and fabrication techniques were screened via degradation, bioactivity, and unconfined compression testing. An optimized ScB construct was selected and its cytotoxicity assessed. Additionally, a cartilage analog was secured to the optimized ScB construct via a calcified cartilage layer, and the resulting osteochondral construct was characterized via interfacial shear and dynamic mechanical testing. The optimized ScB construct did not significantly alter local pH during degradation, exhibited measurable bioactivity in vitro, and had significantly greater compressive mechanical strength compared to other constructs. The attachment strength of the cartilage analog was significantly greater by an increase in compressive dynamic mechanical properties. Furthermore, this ScB construct was found to be cytocompatible with human bone marrow-derived mesenchymal stromal cells. Taken together, this optimized ScB material forms the robust foundation of a novel, off-the-shelf osteochondral construct to be used in defect repair.

STATEMENT OF SIGNIFICANCE

The quality of life for millions of individuals worldwide is detrimentally affected by focal chondral or osteochondral defects. Current off-the-shelf biomaterial constructs often fail to repair these defects due to insufficient osseous support and integration. Herein, we used a scalable process to fabricate and optimize a novel boney construct. This optimized boney construct demonstrated biochemical, physical, and mechanical properties tailored to promote bone healing. Furthermore, a novel cartilage analog was successfully attached to the boney construct, forming a multi-layered osteochondral construct.

Mesenchymal stem cell cultivation in electrospun scaffolds: mechanistic modeling for tissue engineering

Tissue engineering is a multidisciplinary field of research in which the cells, biomaterials, and processes can be optimized to develop a tissue substitute. Three-dimensional (3D) architectural features from electrospun scaffolds, such as porosity, tortuosity, fiber diameter, pore size, and interconnectivity have a great impact on cell behavior. Regarding tissue development in vitro, culture conditions such as pH, osmolality, temperature, nutrient, and metabolite concentrations dictate cell viability inside the constructs. The effect of different electrospun scaffold properties, bioreactor designs, mesenchymal stem cell culture parameters, and seeding techniques on cell behavior can be studied individually or combined with phenomenological modeling techniques. This work reviews the main culture and scaffold factors that affect tissue development in vitro regarding the culture of cells inside 3D matrices. The mathematical modeling of the relationship between these factors and cell behavior inside 3D constructs has also been critically reviewed, focusing on mesenchymal stem cell culture in electrospun scaffolds.

Evaluation of Stem Cell Therapies in a Bilateral Patellar Tendon Injury Model in Rats

Regenerative medicine provides novel alternatives to conditions that challenge traditional treatments. The prevalence and morbidity of tendinopathy across species, combined with the limited healing properties of this tissue, have prompted the search for cellular therapies and propelled the development of experimental models to study their efficacy. Umbilical cord matrix-derived mesenchymal stem cells (UCM-MSC) are appealing candidates because they are abundant, easy to collect, circumvent the ethical concerns and risk of teratoma formation, yet resemble primitive embryonic stem cells more closely than adult tissue-derived MSCs. Significant interest has focused on chitosan as a strategy to enhance the properties of MSCs through spheroid formation. This paper details techniques to isolate UCM-MSCs, prepare spheroids on chitosan film, and analyze the effect of spheroid formation on surface marker expression. Consequently, creation of a bilateral patellar tendon injury model in rats is described for in vivo implantation of UCM-MSC spheroids formed on chitosan film. No complication was observed in the study with respect to morbidity, stress rising effects, or tissue infection. The total functional score of the operated rats at 7 days was lower than that of normal rats, but returned to normal within 28 days after surgery. Histological scores of tissue-healing confirmed the presence of a clot in treated defects evaluated at 7 days, absence of foreign body reaction, and progressing healing at 28 days. This bilateral patella tendon defect model controls inter-individual variation via creation of an internal control in each rat, was associated with acceptable morbidity, and allowed detection of differences between untreated tendons and treatments.

Influence of hypoxia on the stemness of umbilical cord matrix-derived mesenchymal stem cells cultured on chitosan films

Chitosan is attractive as a substrate for stem cell expansion because it improves stemness through formation of spheroids. Hypoxia has also been proposed as a strategy to enhance stemness and survival of stem cells after in vivo implantation. This study was therefore designed to evaluate the influence of hypoxia on chitosan-induced behavior of stem cells. Umbilical cord matrix-derived stem cells were cultured on chitosan film or standard plate under normoxia and hypoxia, for 3 and 7 days. Based on immunophenotyping, chitosan strongly suppresses the expression of CD90 and CD105 cell surface markers, changes partially reversed by combined exposure to hypoxia. Hypoxia generally increased the volume and number of spheroids formed on chitosan, but the cellularity of cultures on chitosan films remained lower than that of standard plates. After 7 days of culture, the expression of stemness related genes (Oct4, Sox2, and Nanog) was best stimulated by combined exposure to chitosan and hypoxia. Based on our results, conditioning stem cells for 7 days on chitosan films under hypoxic conditions is recommended to enhance the stemness of stem cells, and minimize cell loss due to lack of attachment on chitosan. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 501-511, 2018.

Bacterial and mammalian cells adhesion to tantalum-decorated micro-/nano-structured titanium

Microorganisms are frequently introduced to dental implants during surgery and start the race for the surface with host cells before osseointegration occurs. The aim of the study was to endow implant surfaces with biological functions that reliably select cells over microbes. Nano-structured tantalum (Ta) has exhibited excellent compatibility. Thus, nano-structured Ta films were deposited on the sand-blasted, large grit, and acid-etched (SLA) titanium by the magnetron sputtering method, thus forming hierarchical micro-/nano-structured surfaces. No obvious Ta release confirmed the robustness of the deposited layer probably arising from the stable Ta₂ O₅ . Moreover, Ta-modified surfaces not only improved the initial adhesion and spreading of rat bone mesenchymal stem cells (rBMSCs), but also exhibited good antibacterial activities towards Streptococcus mutans and Porphyromonas gingivalis. The satisfactory cell-surface interactions on Ta-modified surfaces depended largely on the up-regulation of adhesion-related genes and activation of focal adhesion kinase (FAK), as confirmed by real-time PCR and Western blot. Here, the coculture model was also forwarded to mimic the perioperative bacterial contamination. We found that the adherent cell number and the cell-surface coverage were hampered by bacteria presence on both surfaces. Yet, rBMSCs still attached and spread more readily on Ta-modified surfaces than on SLA titanium surfaces even in coculture with adhering oral pathogens. Our results revealed that Ta-modified micro-/nano-structured surfaces would selectively promote cell-surface rather than bacteria-surface interactions, boding well for the applications for dental implants in possibly infected environments. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 871-878, 2017.

Effects of Hypoxia and Chitosan on Equine Umbilical Cord-Derived Mesenchymal Stem Cells

Chitosan opens new perspectives in regenerative medicine as it enhances the properties of mesenchymal stem cells (MSCs) through formation of spheroids. Hypoxia has also been proposed to enhance stemness and survival of MSCs after in vivo implantation. These characteristics are relevant to the development of an off-the-shelf source of allogenic cells for regenerative therapy of tendinopathies. Umbilical cord-derived MSCs (UCM-MSCs) offer an abundant source of immature and immunoprivileged stem cells. In this study, equine UCM-MSCs (eqUCM-MSCs) conditioned for 3 and 7 days on chitosan films at 5% oxygen were compared to eqUCM-MSCs under standard conditions. Equine UCM-MSCs formed spheroids on chitosan but yielded 72% less DNA than standard eqUCM-MSCs. Expression of Sox2, Oct4, and Nanog was 4 to 10 times greater in conditioned cells at day 7. Fluorescence-labeled cells cultured for 7 days under standard conditions or on chitosan films under hypoxia were compared in a bilateral patellar tendon defect model in rats. Fluorescence was present in all treated tendons, but the modulus of elasticity under tension was greater in tendons treated with conditioned cells. Chitosan and hypoxia affected cell yield but improved the stemness of eqUCM-MSCs and their contribution to the healing of tissues. Given the abundance of allogenic cells, these properties are highly relevant to clinical applications and outweigh the negative impact on cell proliferation.

Distribution and Viability of Fetal and Adult Human Bone Marrow Stromal Cells in a Biaxial Rotating Vessel Bioreactor after Seeding on Polymeric 3D Additive Manufactured Scaffolds

One of the conventional approaches in tissue engineering is the use of scaffolds in combination with cells to obtain mechanically stable tissue constructs in vitro prior to implantation. Additive manufacturing by fused deposition modeling is a widely used technique to produce porous scaffolds with defined pore network, geometry, and therewith defined mechanical properties. Bone marrow-derived mesenchymal stromal cells (MSCs) are promising candidates for tissue engineering-based cell therapies due to their multipotent character. One of the hurdles to overcome when combining additive manufactured scaffolds with MSCs is the resulting heterogeneous cell distribution and limited cell proliferation capacity. In this study, we show that the use of a biaxial rotating bioreactor, after static culture of human fetal MSCs (hfMSCs) seeded on synthetic polymeric scaffolds, improved the homogeneity of cell and extracellular matrix distribution and increased the total cell number. Furthermore, we show that the relative mRNA expression levels of indicators for stemness and differentiation are not significantly changed upon this bioreactor culture, whereas static culture shows variations of several indicators for stemness and differentiation. The biaxial rotating bioreactor presented here offers a homogeneous distribution of hfMSCs, enabling studies on MSCs fate in additive manufactured scaffolds without inducing undesired differentiation.

Direct comparison of current cell-based and cell-free approaches towards the repair of craniofacial bone defects - A preclinical study

For craniofacial bone defect repair, several alternatives to bone graft (BG) exist, including the combination of biphasic calcium phosphate (BCP) biomaterials with total bone marrow (TBM) and bone marrow-derived mesenchymal stromal cells (MSCs), or the use of growth factors like recombinant human bone morphogenic protein-2 (RhBMP-2) and various scaffolds. Therefore, clinicians might be unsure as to which approach will offer their patients the most benefit. Here, we aimed to compare different clinically relevant bone tissue engineering methods in an "all-in-one" study in rat calvarial defects. TBM, and MSCs committed or not, and cultured in two- or three-dimensions were mixed with BCP and implanted in bilateral parietal bone defects in rats. RhBMP-2 and BG were used as positive controls. After 7 weeks, significant de novo bone formation was observed in rhBMP-2 and BG groups, and in a lesser amount, when BCP biomaterials were mixed with TBM or committed MSCs cultured in three-dimensions. Due to the efficacy and safety of the TBM/BCP combination approach, we recommend this one-step procedure for further clinical investigation.

STATEMENT OF SIGNIFICANCE

For craniofacial repair, total bone marrow (BM) and BM mesenchymal stem cell (MSC)-based regenerative medicine have shown to be promising in alternative to bone grafting (BG). Therefore, clinicians might be unsure as to which approach will offer the most benefit. Here, BM and MSCs committed or not were mixed with calcium phosphate ceramics (CaP) and implanted in bone defects in rats. RhBMP-2 and BG were used as positive controls. After 7 weeks, significant bone formation was observed in rhBMP-2 and BG groups, and when CaP were mixed with BM or committed MSCs. Since the BM-based procedure does not require bone harvest or cell culture, but provides de novo bone formation, we recommend consideration of this strategy for craniofacial applications.

Increased cell seeding efficiency in bioplotted three-dimensional PEOT/PBT scaffolds

In regenerative medicine studies, cell seeding efficiency is not only optimized by changing the chemistry of the biomaterials used as cell culture substrates, but also by altering scaffold geometry, culture and seeding conditions. In this study, the importance of seeding parameters, such as initial cell number, seeding volume, seeding concentration and seeding condition is shown. Human mesenchymal stem cells (hMSCs) were seeded into cylindrically shaped 4 × 3 mm polymeric scaffolds, fabricated by fused deposition modelling. The initial cell number ranged from 5 × 10(4) to 8 × 10(5) cells, in volumes varying from 50 µl to 400 µl. To study the effect of seeding conditions, a dynamic system, by means of an agitation plate, was compared with static culture for both scaffolds placed in a well plate or in a confined agarose moulded well. Cell seeding efficiency decreased when seeded with high initial cell numbers, whereas 2 × 10(5) cells seemed to be an optimal initial cell number in the scaffolds used here. The influence of seeding volume was shown to be dependent on the initial cell number used. By optimizing seeding parameters for each specific culture system, a more efficient use of donor cells can be achieved. Copyright © 2013 John Wiley & Sons, Ltd.

Transportation conditions for prompt use of ex vivo expanded and freshly harvested clinical-grade bone marrow mesenchymal stromal/stem cells for bone regeneration

Successful preliminary studies have encouraged a more translational phase for stem cell research. Nevertheless, advances in the culture of human bone marrow-derived mesenchymal stromal/stem cells (hBM-MSC) and osteoconductive qualities of combined biomaterials can be undermined if necessary cell transportation procedures prove unviable. We aimed at evaluating the effect of transportation conditions on cell function, including the ability to form bone in vivo, using procedures suited to clinical application. hBM-MSC expanded in current Good Manufacturing Practice (cGMP) facilities (cGMP-hBM-MSC) to numbers suitable for therapy were transported overnight within syringes and subsequently tested for viability. Scaled-down experiments mimicking shipment for 18 h at 4°C tested the influence of three different clinical-grade transportation buffers (0.9% saline alone or with 4% human serum albumin [HSA] from two independent sources) compared with cell maintenance medium. Cell viability after shipment was >80% in all cases, enabling evaluation of (1) adhesion to plastic flasks and hydroxyapatite tricalcium phosphate osteoconductive biomaterial (HA/β-TCP 3D scaffold); (2) proliferation rate; (3) ex vivo osteogenic differentiation in contexts of 2D monolayers on plastic and 3D HA/β-TCP scaffolds; and (4) in vivo ectopic bone formation after subcutaneous implantation of cells with HA/β-TCP scaffold into NOD/SCID mice. Von Kossa staining was used to assess ex vivo osteogenic differentiation in 3D cultures, providing a quantifiable test of 3D biomineralization ex vivo as a rapid, cost-effective potency assay. Near-equivalent capacities for cell survival, proliferation, and osteogenic differentiation were found for all transportation buffers. Moreover, cGMP-hBM-MSC transported from a production facility under clinical-grade conditions of 4% HSA in 0.9% saline to a destination 18 h away showed prompt adhesion to HA/β-TCP 3D scaffold and subsequent in vivo bone formation. A successfully validated transportation protocol extends the applicability of fresh stem cells involving multicentric trials for regenerative medicine.

Effect of static seeding methods on the distribution of fibroblasts within human acellular dermis

INTRODUCTION

When developing tissue engineered solutions for existing clinical problems, cell seeding strategies should be optimized for desired cell distribution within matrices. The purpose of this investigation was to compare the effects of different static cell seeding methods and subsequent static cell culture for up to 12 days with regard to seeding efficiency and resulting cellular distribution in acellular dermis.

MATERIALS AND METHODS

The seeding methods tested were surface seeding of both unmodified and mechanically incised dermis, syringe injection of cell suspension, application of low-pressure and use of an ultrasonic bath to remove trapped air. The effect of "platelet derived growth factor" (PDGF) on surface seeding and low pressure seeding was also investigated. Scaffolds were incubated for up to 12 days and were histologically examined at days 0, 4, 8 and 12 for cell distribution and infiltration depth. The metabolic activity of the cells was quantified with the MTT assay at the same time points.

RESULTS

The 50 ml syringe degassing procedure produced the best results in terms of seeding efficiency, cell distribution, penetration depth and metabolic activity within the measured time frame. The injection and ultrasonic bath methods produced the lowest seeding efficiency. The incision method and the 20 ml syringe degassing procedure produced results that were not significantly different to those obtained with a standard static seeding method.

CONCLUSION

We postulate that air in the pores of the human acellular dermis (hAD) hinders cell seeding and subsequent infiltration. We achieved the highest seeding efficiency, homogeneity, infiltration depth and cell growth within the 12 day static culturing period by degassing the dermis using low- pressure created by a 50 ml syringe. We conclude that this method to eliminate trapped air provides the most effective method to seed cells and to allow cell proliferation in a natural scaffold.

Characterization of novel akermanite:poly-ϵ-caprolactone scaffolds for human adipose-derived stem cells bone tissue engineering

In this study, three different akermanite:poly-ϵ-caprolactone (PCL) composite scaffolds (wt%: 75:25, 50:50, 25:75) were characterized in terms of structure, compression strength, degradation rate and in vitro biocompatibility to human adipose-derived stem cells (hASC). Pure ceramic scaffolds [CellCeram™, custom-made, 40:60 wt%; β-tricalcium phosphate (β-TCP):hydroxyapatite (HA); and akermanite] and PCL scaffolds served as experimental controls. Compared to ceramic scaffolds, the authors hypothesized that optimal akermanite:PCL composites would have improved compression strength and comparable biocompatibility to hASC. Electron microscopy analysis revealed that PCL-containing scaffolds had the highest porosity but CellCeram™ had the greatest pore size. In general, compression strength in PCL-containing scaffolds was greater than in ceramic scaffolds. PCL-containing scaffolds were also more stable in culture than ceramic scaffolds. Nonetheless, mass losses after 21 days were observed in all scaffold types. Reduced hASC metabolic activity and increased cell detachment were observed after acute exposure to akermanite:PCL extracts (wt%: 75:25, 50:50). Among the PCL-containing scaffolds, hASC cultured for 21 days on akermanite:PCL (wt%: 75:25) discs displayed the highest viability, increased expression of osteogenic markers (alkaline phosphatase and osteocalcin) and lowest IL-6 expression. Together, the results indicate that akermanite:PCL composites may have appropriate mechanical and biocompatibility properties for use as bone tissue scaffolds.

Leveraging "raw materials" as building blocks and bioactive signals in regenerative medicine

Components found within the extracellular matrix (ECM) have emerged as an essential subset of biomaterials for tissue engineering scaffolds. Collagen, glycosaminoglycans, bioceramics, and ECM-based matrices are the main categories of "raw materials" used in a wide variety of tissue engineering strategies. The advantages of raw materials include their inherent ability to create a microenvironment that contains physical, chemical, and mechanical cues similar to native tissue, which prove unmatched by synthetic biomaterials alone. Moreover, these raw materials provide a head start in the regeneration of tissues by providing building blocks to be bioresorbed and incorporated into the tissue as opposed to being biodegraded into waste products and removed. This article reviews the strategies and applications of employing raw materials as components of tissue engineering constructs. Utilizing raw materials holds the potential to provide both a scaffold and a signal, perhaps even without the addition of exogenous growth factors or cytokines. Raw materials contain endogenous proteins that may also help to improve the translational success of tissue engineering solutions to progress from laboratory bench to clinical therapies. Traditionally, the tissue engineering triad has included cells, signals, and materials. Whether raw materials represent their own new paradigm or are categorized as a bridge between signals and materials, it is clear that they have emerged as a leading strategy in regenerative medicine. The common use of raw materials in commercial products as well as their growing presence in the research community speak to their potential. However, there has heretofore not been a coordinated or organized effort to classify these approaches, and as such we recommend that the use of raw materials be introduced into the collective consciousness of our field as a recognized classification of regenerative medicine strategies.

New ureteral scaffold constructed with composite poly(L-lactic acid)-collagen and urothelial cells by new centrifugal seeding system

A tissue-engineered ureteral scaffold was constructed with composited poly L-lactic acid (PLLA)-collagen endoluminal stent and uroepithelial cells (UECs) using a new seeding system. The electrospun PLLA-collagen nanofibrous mesh was seeded efficiently with human ureteral epithelial cells using a modified centrifugal seeding device. The cellular nanofibrous mesh was then wound around a spiral endoluminal stent to form a cellular composited PLLA-collagen ureteral scaffold. The cellular ureteral scaffold was subcutaneously implanted into nude mice. Cell attachment, distribution, and viability in vitro were investigated along with the cell fate in vivo. (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay showed that scaffolds seeded with centrifugal method had higher cellular activity than scaffolds seeded with static method (p < 0.05), and the metabolic activity per cell had no significant differences between the two methods (p > 0.05). Histologic analysis showed that the entrapped UECs remained in the scaffolds after 2 wk of implantation. The results of the study indicated that the composited PLLA-collagen endoluminal stent could serve as alternative cell carrier for tissue engineering ureter. In addition, the new modified centrifugal seeding system allowed rapid homogeneous distribution of cells onto the nanofibrous mesh, which will be useful to ureteral reconstruction.