Chemical speciation and toxicity of metals assessed by three bioluminescence-based assays using marine organisms

Acute and Chronic Toxicity of Binary Mixtures of Bisphenol A and Heavy Metals

Bisphenol A (BPA) and heavy metals are widespread contaminants in the environment. However, the combined toxicities of these contaminants are still unknown. In this study, the bioluminescent bacteria Vibrio qinghaiensis Q67 was used to detect the single and combined toxicities of BPA and heavy metals, then the joint effects of these contaminants were evaluated. The results show that chronic toxicities of chromium (Cr), cadmium (Cd), lead (Pb), arsenic (As), mercury (Hg), nickel (Ni), and BPA were time−dependent; in fact, the acute toxicities of these contaminants were stronger than the chronic toxicities. Furthermore, the combined toxicities of BPA and heavy metals displayed BPA + Hg > BPA + Cr > BPA + As > BPA + Ni > BPA + Pb > BPA + Cd in the acute test and BPA + Hg > BPA + Cd > BPA + As > BPA + Cd in the chronic test, which suggested that the combined toxicity of BPA and Hg was stronger than that of other mixtures in acute as well as chronic tests. Additionally, both CA and IA models underestimated the toxicities of mixtures at low concentrations but overestimated them at high concentrations, which indicates that CA and IA models were not suitable to predict the toxicities of mixtures of BPA and heavy metals. Moreover, the joint effects of BPA and heavy metals mainly showed antagonism and additive in the context of acute exposure but synergism and additive in the context of chronic exposure. Indeed, the difference in the joint effects on acute and chronic exposure can be explained by the possibility that mixtures inhibited cell growth and luminescence in chronic cultivation. The chronic toxicity of the mixture should be considered if the mixture results in the inhibition of the growth of cells.

Role of bacterial cell surface sulfhydryl sites in cadmium detoxification by Pseudomonas putida

Understanding bacterial metal detoxification systems is crucial for determining the environmental impacts of metal pollution and for developing advanced bioremediation and water disinfection strategies. Here, we explore the role of cell surface sulfhydryl sites in bacterial detoxification of Cd, using Pseudomonas putida with surface sulfhydryl sites mostly on its EPS molecules as a model organism. Our results show that 5 and 20 ppm Cd in LB growth medium affects the lag phase of P. putida, but not the overall extent of cell growth at stationary phase, indicating that P. putida can detoxify Cd at these concentrations. EXAFS analysis of Cd bound to biomass from the different growth stages indicates that Cd binds to both sulfhydryl and non-sulfhydryl sites, but that the importance of Cd-sulfhydryl binding increases from early exponential to stationary phase. Cell growth is positively correlated to the measured sulfhydryl concentration on different biomass samples, but is independent of the measured non-sulfhydryl binding site concentration on the cell surfaces. Taken together, our results demonstrate that the sulfhydryl binding sites on EPS molecules can play an important role in binding and detoxifying toxic metals, significantly decreasing the bioavailability of the metal by sequestering it away from the bacterial cells.

Microplate freeze-dried cyanobacterial bioassay for fresh-waters environmental monitoring

Microorganisms have been very useful in environmental monitoring due to their constant sensing of the surrounding environment, their easy maintenance and low cost. Some freeze-dried toxicity kits based on naturally bioluminescent bacteria are commercially available and commonly used to assess the toxicity of environmental samples such as Microtox (Aliivibrio fischeri) or ToxScreen (Photobacterium leiognathi), however, due to the marine origin of these bacteria, they could not be the most appropriate for fresh-waters monitoring. Cyanobacteria are one of the most representative microorganisms of aquatic environments, and are well suited for detecting contaminants in aqueous samples. This study presents the development and application of the first freeze-dried cyanobacterial bioassay for fresh-water contaminants detection. The effects of different cell growth phases, cryoprotectant solutions, freezing protocols, rehydration solutions and incubation conditions methods were evaluated and the best combination of these parameters for freeze-drying was selected. The study includes detailed characterization of sensitivity towards reference pollutants, as well as, comparison with the standard assays. Moreover, long-term viability and sensitivity were evaluated after 3 years of storage. Freeze-dried cyanobacteria showed, in general, higher sensitivity than the standard assays and viability of the cells remained after 3 years of storage. Finally, the validation of the bioassay using a wastewater sample was also evaluated. Freeze-drying of cyanobacteria in 96-well plates presents a simple, fast and multi-assay method for environmental monitoring.

Rapid in situ toxicity testing with luminescent bacteria Photorhabdus luminescens and Vibrio fischeri adapted to a small portable luminometer

The present study demonstrates development of a rapid testing protocol based on a small portable luminometer using flash kinetic assessment of bacterial bioluminescence. The laboratory comparisons based on six model organic toxicants and two metals showed significant correlations between responses of freshwater bacteria Photorhabdus luminescens and standard marine bacterial species Vibrio fisheri. While P. luminescens was less sensitive in standard arrangements, the responses of both organisms were comparable in the newly introduced portable luminometer setup. The applicability and reproducibility of the portable luminometer protocol was further demonstrated in the assessment of 43 European wastewater effluents that were simultaneously tested for toxicity and analysed for 150 organic and 20 inorganic contaminants grouped into 13 major chemical classes. Clear association between the toxic responses in both compared bacterial species and the elevated levels of inorganic compounds (toxic metals), chlorophenols and benzotriazole anticorrosives was observed. The new protocol with a portable luminometer provides a fast (30 s) response and may be used as a tool for rapid in situ toxicity evaluation of freshwater environmental samples such as effluents.

Evaluation of toxicity and genotoxicity of 2-chlorophenol on bacteria, fish and human cells

Due to the extensive use of chlorophenols (CPs) in anthropogenic activities, 2-Chlorophenol (2-CP), among other CPs, can enter aquatic ecosystems and can be harmful to a variety of organisms, including bacteria, fish and humans, that are exposed directly and/or indirectly to such contaminated environments. Based on the existing knowledge and in order to move a step forward, the purpose of this study is to investigate the toxic and mainly the genotoxic effects of 2-CP using a combination of bioassays. The tests include the marine bacterium Vibrio fischeri and micronuclei induction in the erythrocytes of Carassius auratus as well as in cultured human lymphocytes. The results obtained reveal that 2-CP is able to induce dose-dependent toxic and genotoxic effects on the selected tested concentrations under the specific experimental conditions.

Construction of a self-luminescent cyanobacterial bioreporter that detects a broad range of bioavailable heavy metals in aquatic environments

A self-luminescent bioreporter strain of the unicellular cyanobacterium Synechococcus sp. PCC 7942 was constructed by fusing the promoter region of the smt locus (encoding the transcriptional repressor SmtB and the metallothionein SmtA) to luxCDABE from Photorhabdus luminescens; the sensor smtB gene controlling the expression of smtA was cloned in the same vector. The bioreporter performance was tested with a range of heavy metals and was shown to respond linearly to divalent Zn, Cd, Cu, Co, Hg, and monovalent Ag. Chemical modeling was used to link bioreporter response with metal speciation and bioavailability. Limits of Detection (LODs), Maximum Permissive Concentrations (MPCs) and dynamic ranges for each metal were calculated in terms of free ion concentrations. The ranges of detection varied from 11 to 72 pM for Hg²⁺ (the ion to which the bioreporter was most sensitive) to 1.54–5.35 μM for Cd²⁺ with an order of decreasing sensitivity as follows: Hg²⁺ >> Cu²⁺ >> Ag⁺ > Co²⁺ ≥ Zn²⁺ > Cd²⁺. However, the maximum induction factor reached 75-fold in the case of Zn²⁺ and 56-fold in the case of Cd²⁺, implying that Zn²⁺ is the preferred metal in vivo for the SmtB sensor, followed by Cd²⁺, Ag⁺ and Cu²⁺ (around 45–50-fold induction), Hg²⁺ (30-fold) and finally Co²⁺ (20-fold). The bioreporter performance was tested in real environmental samples with different water matrix complexity artificially contaminated with increasing concentrations of Zn, Cd, Ag, and Cu, confirming its validity as a sensor of free heavy metal cations bioavailability in aquatic environments.

Effect of water quality on mercury toxicity to Photobacterium phosphoreum: Model development and its application in natural waters

Mercury (Hg) compounds are widely distributed toxic environmental and industrial pollutants and they may bring danger to growth and development of aquatic organisms. The distribution of Hg species in the 3 percent NaCl solution was calculated using the chemical equilibrium model Visual MINTEQ, which demonstrated that Hg was mainly complexed by chlorides in the pH range 5.0-9.0 and the proportions of HgCl4(2-), HgCl3(-) and HgCl2(aq) reached to 95 percent of total Hg. Then the effects of cations (Ca(2+), Mg(2+), K(+) and H(+)), anions (HCO3(-), NO3(-), SO4(2-) and HPO4(2-)) and complexing agents (ethylene diamine tetraacetic acid (EDTA) and dissolved organic matter (DOM)) on Hg toxicity to Photobacterium phosphoreum were evaluated in standardized 15min acute toxicity tests. The significant increase of 6.3-fold in EC50 data with increasing pH was observed over the tested pH range of 5.0-8.0, which suggested the possible competition between hydroxyl and the negatively charged chloro-complex. By contrast, it was found that major cations (Ca(2+), Mg(2+) and K(+)) have little effect on Hg toxicity to P. phosphoreum. An interesting finding was that the addition of HPO4(2-) significantly increased Hg toxicity, which may imply that the addition of phosphate increased the soluble Hg-chloro complex species. Additions of complexing agents (EDTA and DOM) into the exposure water increased Hg bioavailability via complexation of Hg. Finally, a model which incorporated the effect of pH, HPO4(2-), HCO3(-), SO4(2-) and DOM on Hg toxicity was developed to predict acute Hg toxicity for P. phosphoreum, which may be a useful tool in setting realistic water quality criteria for different types of water.

Evaluation of the ecotoxicity of pollutants with bioluminescent microorganisms

This chapter deals with the use of bioluminescent microorganisms in environmental monitoring, particularly in the assessment of the ecotoxicity of pollutants. Toxicity bioassays based on bioluminescent microorganisms are an interesting complement to classical toxicity assays, providing easiness of use, rapid response, mass production, and cost effectiveness. A description of the characteristics and main environmental applications in ecotoxicity testing of naturally bioluminescent microorganisms, covering bacteria and eukaryotes such as fungi and dinoglagellates, is reported in this chapter. The main features and applications of a wide variety of recombinant bioluminescent microorganisms, both prokaryotic and eukaryotic, are also summarized and critically considered. Quantitative structure-activity relationship models and hormesis are two important concepts in ecotoxicology; bioluminescent microorganisms have played a pivotal role in their development. As pollutants usually occur in complex mixtures in the environment, the use of both natural and recombinant bioluminescent microorganisms to assess mixture toxicity has been discussed. The main information has been summarized in tables, allowing quick consultation of the variety of luminescent organisms, bioluminescence gene systems, commercially available bioluminescent tests, environmental applications, and relevant references.

Toxicity of metal-ethylenediaminetetraacetic acid solution as a function of chemical speciation: an approach for toxicity assessment

The influence of complexation by ethylenediaminetetraacetic acid (EDTA) on the toxicity of Cd(II), Cu(II), Cd(II), and Ni(II) was investigated. Result of the Microtox test, which is based on measuring the decrease of light emitted by Vibrio fischeri bacterium when exposed to a toxicant, was used as an indication of toxicity. The effect of pH and EDTA molar ratio that might potentially modify the percentage of chemical species in solution on toxicity was evaluated. In general, results indicate that toxicity decreases when increasing the pH value as well as the EDTA molar ratio. Chemical modeling was used to predict metal speciation and correlation analysis to relate chemical species with the obtained toxicity results. The species that most contribute to toxicity resulted to be MeCl(+) (Me = metal), which is formed as a consequence of the presence of the bioassay medium (2 % NaCl). A model that predicts metal-solution toxicity by using the chemical species, which most contribute to toxicity is proposed as a useful tool for toxicity assessment in waters containing metal ions and EDTA.

Development of immobilized biophotonic beads consisting of Photobacterium leiognathi for the detection of heavy metals and pesticide

The present communication deals with construction of immobilized robust biophotonic bead using P. leiognathi, a marine luminescent bacterium for their possible application in monitoring of environmental toxicants. Immobilization efficiency of agar, carrageenan and sodium alginate was evaluated separately in terms of luminescence response and was recorded as 30.3, 77.4 or 99.5%, respectively. Under optimized storage conditions, the luminescent response of P. leiognathi in the immobilized state was studied over a period of 30 days. These biophotonic beads were further used as a rapid and reliable optical biosensing tool for the detection of heavy metals [Hg(II), As(V) or Cd(II)] and pesticide [2,4-dichlorophenoxyacetic acid (2,4-D)] in water systems. The concentration range for the detection of Hg(II), As(V), Cd(II) and 2,4-D was 2-32ppm, 4-128ppm, 16-512ppm and 100-600ppm, respectively, while corresponding sensitivity threshold was 2.0ppm, 4.0ppm, 16.0ppm and 100ppm. A comparison of inhibition constant (K(d)) (or EC(20)) values indicated that the sensitivity thresholds rank as Hg(II)>As(V)>Cd(II)>2,4-D. Moreover, the time taken for the detection of heavy metals and pesticide was less than 30min. Using the bioluminescence inhibition method, the concentration of heavy metals and pesticide could be predicted.

Effect of pH, EDTA, and anions on heavy metal toxicity toward a bioluminescent cyanobacterial bioreporter

The bioavailability and therefore toxicity of a metal depends on the chemical species present in a particular environment. We evaluated the effect of a series of factors that could potentially modify metal speciation on the toxicity of Hg, Cu, Zn, and Cd toward a recombinant strain of the freshwater cyanobacterium Anabaena sp. PCC 7120 with cloned lux operon of luminescent terrestrial bacterium Photorhabdus luminescens. The strain, denoted as Anabaena CPB4337, showed a high constitutive luminescence with no need to add exogenous aldehyde. The tested factors were pH, EDTA (as organic ligand), and anions PO(4)(3-), CO(3)(2-), and Cl(-). Chemical modeling and correlation analyses were used to predict metal speciation and link it with toxicity. In general, metal toxicity significantly correlated to the predicted metal free-ion concentration, although Zn-EDTA complexes and certain Hg chloro-complexes could also exhibit some toxicity to cyanobacteria. An interesting feature of metal toxicity to strain Anabaena CPB4337 was that low amounts of PO(4)(3-) and CO(3)(2-) increased metal toxicity; this effect could not be related to significant changes in metal speciation and could be attributed to a modulating effect of these anions on metal/uptake toxicity. The combination of toxicity studies that take into account a range of factors that might modulate metal toxicity with chemical modeling to predict changes in metal speciation might be useful for interpreting complex toxicity data. Finally, this cyanobacterial bioreporter, due to its ecological relevance as a primary producer, could be used as a tool for toxicity assessment in freshwater environments.

Plutonium speciation affected by environmental bacteria

Plutonium has no known biological utility, yet it has the potential to interact with bacterial cellular and extracellular structures that contain metal-binding groups, to interfere with the uptake and utilization of essential elements, and to alter cell metabolism. These interactions can transform plutonium from its most common forms, solid, mineral-adsorbed, or colloidal Pu(IV), to a variety of biogeochemical species that have much different physico-chemical properties. Organic acids that are extruded products of cell metabolism can solubilize plutonium and then enhance its environmental mobility, or in some cases facilitate plutonium transfer into cells. Phosphate- and carboxylate-rich polymers associated with cell walls can bind plutonium to form mobile biocolloids or Pu-laden biofilm/mineral solids. Bacterial membranes, proteins or redox agents can produce strongly reducing electrochemical zones and generate molecular Pu(III/IV) species or oxide particles. Alternatively, they can oxidize plutonium to form soluble Pu(V) or Pu(VI) complexes. This paper reviews research on plutonium-bacteria interactions and closely related studies on the biotransformation of uranium and other metals.

BIOLUMBASE?the database of natural and transgenic bioluminescent organisms

The Institute of Biophysics SB RAS hosts and maintains a specialized collection of luminous bacteria (CCIBSO 836) containing over 700 strains isolated in various regions of the world's oceans. The culture collection is a source of lux genes and biologically active substances. The wide application of bioluminescence in medicine and ecology has given importance to analysing information on the structure and functioning of bioluminescence systems in natural and transgenic microorganisms, as well as on their features that are closely interrelated with bioluminescence. The aims of our BIOLUMBASE database are: gathering information on microorganisms with lux genes, their analysis and free access, and distribution of this data throughout the global network. The database includes two sections, natural and transgenic luminous microorganisms, and is updated by our own experimental results, the published literature and internet resources. For the future, a publicly available internet site for BIOLUMBASE is planned. This will list the strains and provide comprehensive information on the properties and functions of luminous bacteria, the mechanisms of regulation of bioluminescence systems, constructs with lux genes, and applications of bioluminescence in microbiology, ecology, medicine and biotechnology. It is noteworthy that this database will also be useful for evaluation of biological hazards of transgenic strains. Users will be able to carry out bibliographic and strain searches starting from any feature of interest.