Nanoparticle detection of respiratory infection

Rapid method for detection of Vibrio cholerae from drinking water with nanomaterials enhancing electrochemical biosensor

Cholera is a potentially fatal diarrheal disease caused by Vibrio cholerae and is spread to humans from contaminated food and water. In order to prevent spread of epidemic chlorea, the development of novel sensitive, selective, user-friendly, cost-effective and rapid detection systems to detect of V. cholerae are necessary. Therefore, in this study, it was aimed to develop a specific, electrochemical immunoassay with high selectivitiy and sensitivity for detection of V. cholerae from drinking water using in house synthesized Gold Nanoparticles (AuNPs). The synthesized AuNPs were characterized by UV/Vis spectroscopy, Dynamic Light Scattering (DLS) and Atomic Force Microscopy (AFM) and electrochemical techniques were applied to confirm the succesful fabrication of the immunosensor. Also, this study focuses on the development of an antibody sensor for V. cholerae detection using a standard immunoassay without using nanoparticle. To accomplish that, in house spherical synthesized AuNPs at various sizes were synthesized, conjugated with secondary antibody-horseradish peroxidase enzyme (HRP) complex and their possible effect on the lowest detection limit of V. cholerae was investigated in comparison to commercially available AuNPs. The AuNPs-immunosensor on the results enabled the quantification of V. cholerae in a wide concentration range with a high sensitivity limit of detection (1 Colony-Forming Units/Milliliter) and specificity. Although the effect of 33 and 54 nm AuNPs on the process is close to each other, it has been observed that there is a 34% loss of efficiency when the size of the nanoparticle increases. With this study, a novel V. cholerae specific immunosensor was developed and the effects of in house synthesized AuNPs with various diameter on this developed biosensor were investigated in detail.

Nanotechnology-based diagnostic methods for coronavirus: From nucleic acid extraction to amplification

The recent emergence of human coronaviruses (CoVs) causing severe acute respiratory syndrome (SARS) is posing a great threat to global public health. Therefore, the rapid and accurate identification of pathogenic viruses plays a vital role in selecting appropriate treatments, saving people's lives and preventing epidemics. Nucleic acids, including deoxyribonucleic acid (DNA) and ribonucleic acid (RNA), are natural biopolymers composed of nucleotides that store, transmit, and express genetic information. Applications of nucleic acid detection range from genotyping and genetic prognostics, to expression profiling and detection of infectious disease. The nucleic acid detection for infectious diseases is widely used, as evidenced by the widespread use of COVID-19 tests for the containment of the pandemic. Nanotechnology influences all medical disciplines and has been considered as an essential tool for novel diagnostics, nanotherapeutics, vaccines, medical imaging, and the utilization of biomaterials for regenerative medicine. In this review, the recent advances in the development of nanotechnology-based diagnostic methods for coronavirus, and their applications in nucleic acid detection are discussed in detail. The techniques for the amplification of nucleic acids are summarized, as well as the use of magnetic nanoparticles for nucleic acid extraction. Besides, current challenges and future prospects are proposed, along with the great potential of nanotechnology for the effective diagnosis of coronavirus.

The relevant information about the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) using the five-question approach (when, where, what, why, and how) and its impact on the environment

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is regarded as a threat because it spreads quickly across the world without requiring a passport or establishing an identity. This tiny virus has wreaked havoc on people's lives, killed people, and created psychological problems all over the world. The viral spike protein (S) significantly contributes to host cell entry, and mutations associated with it, particularly in the receptor-binding protein (RBD), either facilitate the escape of virus from neutralizing antibodies or enhance its transmission by increasing the affinity for cell entry receptor, angiotensin-converting enzyme 2 (ACE2). The initial variants identified in Brazil, South Africa, and the UK have spread to various countries. On the other hand, new variants are being detected in India and the USA. The viral genome and proteome were applied for molecular detection techniques, and nanotechnology particles and materials were utilized in protection and prevention strategies. Consequently, the SARS-CoV-2 pandemic has resulted in extraordinary scientific community efforts to develop detection methods, diagnosis tools, and effective antiviral drugs and vaccines, where prevailing academic, governmental, and industrial institutions and organizations continue to engage themselves in large-scale screening of existing drugs, both in vitro and in vivo. In addition, COVID-19 pointed on the possible solutions for the environmental pollution globe problem. Therefore, this review aims to address SARS-CoV-2, its transmission, where it can be found, why it is severe in some people, how it can be stopped, its diagnosis and detection techniques, and its relationship with the environment.

Recent Developments in Nanotechnology-Based Biosensors for the Diagnosis of Coronavirus

The major challenge in today's world is that medical research is facing the existence of a vast number of viruses and their mutations, which from time to time cause outbreaks. Also, the continuous and spontaneous mutations occurring in the viruses and the emergence of resistant virus strains have become serious medical hazards. So, in view of the growing number of diseases, like the recent COVID-19 pandemic that has caused the deaths of millions of people, there is a need to improve rapid and sensitive diagnostic strategies to initiate timely treatment for such conditions. In the cases like COVID-19, where a real cure due to erratic and ambiguous signs is not available, early intervention can be life-saving. In the biomedical and pharmaceutical industries, nanotechnology has evolved exponentially and can overcome multiple obstacles in the treatment and diagnosis of diseases. Nanotechnology has developed exponentially in the biomedical and pharmaceutical fields and can overcome numerous challenges in the treatment and diagnosis of diseases. At the nano stage, the molecular properties of materials such as gold, silver, carbon, silica, and polymers get altered and can be used for the creation of reliable and accurate diagnostic techniques. This review provides insight into numerous diagnostic approaches focused on nanoparticles that could have been established for quick and early detection of such diseases.

Coronavirus: a comparative analysis of detection technologies in the wake of emerging variants

An outbreak of the coronavirus disease caused by a novel pathogen created havoc and continues to affect the entire world. As the pandemic progressed, the scientific community was faced by the limitations of existing diagnostic methods. In this review, we have compared the existing diagnostic techniques such as reverse transcription polymerase chain reaction (RT-PCR), antigen and antibody detection, computed tomography scan, etc. and techniques in the research phase like microarray, artificial intelligence, and detection using novel materials; on the prospect of sample preparation, detection procedure (qualitative/quantitative), detection time, screening efficiency, cost-effectiveness, and ability to detect different variants. A detailed comparison of different techniques showed that RT-PCR is still the most widely used and accepted coronavirus detection method despite certain limitations (single gene targeting- in context to mutations). New methods with similar efficiency that could overcome the limitations of RT-PCR may increase the speed, simplicity, and affordability of diagnosis. In addition to existing devices, we have also discussed diagnostic devices in the research phase showing high potential for clinical use. Our approach would be of enormous benefit in selecting a diagnostic device under a given scenario, which would ultimately help in controlling the current pandemic caused by the coronavirus, which is still far from over with new variants emerging.

Nanotechnology Role Development for COVID-19 Pandemic Management

The global outbreak of coronavirus disease has sent an ominous message to the field of innovative and advanced technology research and development (COVID-19). To accomplish this, convectional technology and recent discoveries can be combined, or new research directions can be opened up using nanotechnology. Nanotechnology can be used to prevent, diagnose, and treat SARS-CoV-2 infection. As the pandemic spreads, a thorough examination of nanomaterials' role in pandemic response is highly desirable. According to this comprehensive review article, nanotechnology can be used to prevent, diagnose, and treat COVID-19. This research will be extremely useful during the COVID-19 outbreak in terms of developing rules for designing nanostructure materials to combat the outbreak.

Recent Progress in Nanotechnology for COVID-19 Prevention, Diagnostics and Treatment

The COVID-19 pandemic is currently an unprecedented public health threat. The rapid spread of infections has led to calls for alternative approaches to combat the virus. Nanotechnology is taking root against SARS-CoV-2 through prevention, diagnostics and treatment of infections. In light of the escalating demand for managing the pandemic, a comprehensive review that highlights the role of nanomaterials in the response to the pandemic is highly desirable. This review article comprehensively discusses the use of nanotechnology for COVID-19 based on three main categories: prevention, diagnostics and treatment. We first highlight the use of various nanomaterials including metal nanoparticles, carbon-based nanoparticles and magnetic nanoparticles for COVID-19. We critically review the benefits of nanomaterials along with their applications in personal protective equipment, vaccine development, diagnostic device fabrication and therapeutic approaches. The remaining key challenges and future directions of nanomaterials for COVID-19 are briefly discussed. This review is very informative and helpful in providing guidance for developing nanomaterial-based products to fight against COVID-19.

Electrochemical diagnostics of infectious viral diseases: Trends and challenges

Infectious diseases caused by viruses can elevate up to undesired pandemic conditions affecting the global population and normal life function. These in turn impact the established world economy, create jobless situations, physical, mental, emotional stress, and challenge the human survival. Therefore, timely detection, treatment, isolation and prevention of spreading the pandemic infectious diseases not beyond the originated town is critical to avoid global impairment of life (e.g., Corona virus disease - 2019, COVID-19). The objective of this review article is to emphasize the recent advancements in the electrochemical diagnostics of twelve life-threatening viruses namely - COVID-19, Middle east respiratory syndrome (MERS), Severe acute respiratory syndrome (SARS), Influenza, Hepatitis, Human immunodeficiency virus (HIV), Human papilloma virus (HPV), Zika virus, Herpes simplex virus, Chikungunya, Dengue, and Rotavirus. This review describes the design, principle, underlying rationale, receptor, and mechanistic aspects of sensor systems reported for such viruses. Electrochemical sensor systems which comprised either antibody or aptamers or direct/mediated electron transfer in the recognition matrix were explicitly segregated into separate sub-sections for critical comparison. This review emphasizes the current challenges involved in translating laboratory research to real-world device applications, future prospects and commercialization aspects of electrochemical diagnostic devices for virus detection. The background and overall progress provided in this review are expected to be insightful to the researchers in sensor field and facilitate the design and fabrication of electrochemical sensors for life-threatening viruses with broader applicability to any desired pathogens.

Laboratory diagnosis of coronavirus disease-2019 (COVID-19)

The outbreak of Coronavirus Disease-2019 (COVID-19) caused by Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) has threatened health worldwide. As of the end of 2020, there were nearly 10 million confirmed cases and nearly 5 million deaths associated with COVID-19. Rapid and early laboratory diagnosis of COVID-19 is the main focus of treatment and control. Molecular tests are the basis for confirmation of COVID-19, but serological tests for SARS-CoV-2 are widely available and play an increasingly important role in understanding the epidemiology of the virus and in identifying populations at higher risk for infection. Point-of-care tests have the advantage of rapid, accurate, portable, low cost and non-specific device requirements, which provide great help for disease diagnosis and detection. This review will discuss the performance of different laboratory diagnostic tests and platforms, as well as suitable clinical samples for testing, and related biosafety protection. This review shall guide for the diagnosis of COVID-19 caused by SARS-CoV-2.

How can nanotechnology help to combat COVID-19? Opportunities and urgent need

Incidents of viral outbreaks have increased at an alarming rate over the past decades. The most recent human coronavirus known as COVID-19 (SARS-CoV-2) has already spread around the world and shown R0 values from 2.2 to 2.68. However, the ratio between mortality and number of infections seems to be lower in this case in comparison to other human coronaviruses (such as severe acute respiratory syndrome coronavirus (SARS-CoV) and Middle East respiratory syndrome coronavirus (MERS-CoV)). These outbreaks have tested the limits of healthcare systems and have posed serious questions about management using conventional therapies and diagnostic tools. In this regard, the use of nanotechnology offers new opportunities for the development of novel strategies in terms of prevention, diagnosis and treatment of COVID-19 and other viral infections. In this review, we discuss the use of nanotechnology for COVID-19 virus management by the development of nano-based materials, such as disinfectants, personal protective equipment, diagnostic systems and nanocarrier systems, for treatments and vaccine development, as well as the challenges and drawbacks that need addressing.

Nanomaterials and nanocomposite applications in veterinary medicine

Nowadays, nanotechnology has made huge, significant advancements in biotechnology and biomedicine related to human and animal science, including increasing health safety, production, and the elevation of national income. There are various fields of nanomaterial applications in veterinary medicine such as efficient diagnostic and therapeutic tools, drug delivery, animal nutrition, breeding and reproduction, and valuable additives. Additional benefits include the detection of pathogens, protein, biological molecules, antimicrobial agents, feeding additives, nutrient delivery, and reproductive aids. There are many nanomaterials and nanocomposites that can be used in nanomedicine such as metal nanoparticles, liposomes, carbon nanotubes, and quantum dots. In the near future, nanotechnology research will have the ability to produce novel tools for improving animal health and production. Therefore, this chapter was undertaken to spotlight novel methods created by nanotechnology for application in the improvement of animal health and production. In addition, the toxicity of nanomaterials is fully discussed to avoid the suspected health hazards of toxicity for animal health safety.

Nanoparticles for Signaling in Biodiagnosis and Treatment of Infectious Diseases

Advances in nanoparticle-based systems constitute a promising research area with important implications for the treatment of bacterial infections, especially against multidrug resistant strains and bacterial biofilms. Nanosystems may be useful for the diagnosis and treatment of viral and fungal infections. Commercial diagnostic tests based on nanosystems are currently available. Different methodologies based on nanoparticles (NPs) have been developed to detect specific agents or to distinguish between Gram-positive and Gram-negative microorganisms. Also, biosensors based on nanoparticles have been applied in viral detection to improve available analytical techniques. Several point-of-care (POC) assays have been proposed that can offer results faster, easier and at lower cost than conventional techniques and can even be used in remote regions for viral diagnosis. Nanoparticles functionalized with specific molecules may modulate pharmacokinetic targeting recognition and increase anti-infective efficacy. Quorum sensing is a stimuli-response chemical communication process correlated with population density that bacteria use to regulate biofilm formation. Disabling it is an emerging approach for combating its pathogenicity. Natural or synthetic inhibitors may act as antibiofilm agents and be useful for treating multi-drug resistant bacteria. Nanostructured materials that interfere with signal molecules involved in biofilm growth have been developed for the control of infections associated with biofilm-associated infections.

Resveratrol protects neuronal cells from isoflurane-induced inflammation and oxidative stress-associated death by attenuating apoptosis via Akt/p38 MAPK signaling

The aim of the present study was to determine whether resveratrol protects neuronal cells from inflammation and isoflurane-induced oxidative stress-associated death via attenuating apoptosis via Akt/p38 mitogen-activated protein kinase (MAPK) signaling. The PC12 rat pheochromocytoma cell line was treated with 2% isoflurane + 21% O₂ + 5% CO₂ for 6 h and pre-treated with resveratrol (0-1,000 µM) for 0, 24 or 48 h prior to isoflurane treatment. An MTT assay, flow cytometry and ELISA of tumor necrosis factor-α, interleukin-6, malondialdehyde and superoxide dismutase revealed that resveratrol reduced growth inhibition, restrained apoptosis and suppressed inflammation and oxidative stress induced by isoflurane in PC12 cells. Pretreatment with resveratrol effectively reduced caspase-3 activity and inducible nitric oxide synthase protein expression in isoflurane-induced PC12 cells. In addition, western blot analysis demonstrated that resveratrol treatment significantly attenuated isoflurane-induced decreases in the activated phosphorylated (p)-Akt/Akt ratio and increases in the p-p38/p38 MAPK protein ratio in PC12 cells. These findings indicated that resveratrol was able to protect neuronal cells from isoflurane-induced inflammation and oxidative stress-associated death by attenuating apoptosis via Akt/p38 MAPK signaling.

AuNPs for identification of molecular signatures of resistance

The increasing levels of drug resistance are one of biggest threats to overcome microbial infection. The ability to rapidly and accurately detect a given pathogen and its drug resistance profile is essential for the appropriate treatment of patients and for preventing further spread of drug-resistant strains. The predictive and informative value of these molecular markers needs to be translated into robust surveillance tools that correlate to the target and extent of resistance, monitor multiresistance and provide real time assessment at point-of-need. Rapid molecular assays for the detection of drug-resistance signatures in clinical specimens are based on the detection of specific nucleotide sequences and/or mutations within pre-selected biomarkers in the genome, indicative of the presence of the pathogen and/or associated with drug resistance. DNA and/or RNA based assays offer advantages over phenotypic assays, such as specificity and time from collection to result. Nanotechnology has provided new and robust tools for the detection of pathogens and more crucially to the fast and sensitive characterisation of molecular signatures of drug resistance. Amongst the plethora of nanotechnology based approaches, gold nanoparticles have prompt for the development of new strategies and platforms capable to provide valuable data at point-of-need with increased versatility but reduced costs. Gold nanoparticles, due to their unique spectral, optical and electrochemical properties, are one of the most widely used nanotechnology systems for molecular diagnostics. This review will focus on the use of gold nanoparticles for screening molecular signatures of drug resistance that have been reported thus far, and provide a critical evaluation of current and future developments of these technologies assisting pathogen identification and characterisation.

FITC-quencher based caspase 3-activatable nanoprobes for effectively sensing caspase 3 in vitro and in cells

By employing fluorescence resonance energy transfer (FRET) quenching, we rationally designed two new FITC-quencher based nanoprobes for effectively sensing caspase 3 (Casp3) in vitro and in cells. Our nanoprobes hold promise for assessing the chemotherapeutic effect of cancer treatment.

Applications of gold nanoparticles in the detection and identification of infectious diseases and biothreats

The situation of infectious diseases and biothreats all over the world remains serious. The effective identification of such diseases plays a very important role. In recent years, gold nanoparticles have been widely used in biosensor design to improve the performance for the detection of infectious diseases and biothreats. Here, recent advances of gold-nanoparticle-based biosensors in this field are summarized.

Nanomedicine and veterinary science: the reality and the practicality

Nanomedicine is a rapidly expanding field with a promising future that is already permeating veterinary science. This review summarises the current applications for nanoparticles in human medicine and explores their potential applicability for veterinary use. The principles underlying the use of nanoparticles in drug delivery, imaging and as vaccine adjuvants are explored along with the unique issues surrounding nanoparticle toxicity and regulatory approval. A brief overview of the properties of different nanoparticle systems including, liposomes, micelles, emulsions and inorganic nanoparticles, is provided, along with a description of their current and potential future applications in veterinary medicine.

Colorimetric bacteria sensing using a supramolecular enzyme-nanoparticle biosensor

Rapid and sensitive detection of pathogens is a key requirement for both environmental and clinical settings. We report here a colorimetric enzyme-nanoparticle conjugate system for detection of microbial contamination. In this approach, cationic gold nanoparticles (NPs) featuring quaternary amine headgroups are electrostatically bound to an enzyme [β-galactosidase (β-Gal)], inhibiting enzyme activity. Analyte bacteria bind to the NP, which releases the β-Gal and restores its activity, providing an enzyme-amplified colorimetric readout of the binding event. Using this strategy, we have been able to quantify bacteria at concentrations of 1 × 10(2) bacteria/mL in solution and 1 × 10(4) bacteria/mL in a field-friendly test strip format.

Colorimetric assay for determination of lead (II) based on its incorporation into gold nanoparticles during their synthesis

In this report, we present a new method for visual detection of Pb2+. Gold nanoparticles (Au-NPs) were synthesized in one step at room temperature, using gallic acid (GA) as reducer and stabilizer. Pb2+ is added during the gold nanoparticle formation. Analysis of Pb2+ is conducted by a dual strategy, namely, colorimetry and spectrometry. During Au-NPs synthesis, addition of Pb2+ would lead to formation of Pb-GA complex, which can induce the aggregation of newly-formed small unstable gold nanoclusters. Consequently, colorimetric detection of trace Pb2+ can be realized. As the Pb2+ concentration increases, the color turns from red-wine to purple, and finally blue. This method offers a sensitive linear correlation between the shift of the absorption band (Δλ) and logarithm of Pb2+ concentration ranging from 5.0×10(-8) to 1.0×10(-6) M with a linear fit coefficient of 0.998, and a high selectivity for Pb2+ detection with a low detection limit down to 2.5×10(-8) M.

BiotecVisions 2010, May-June

News:Ethanol biofuels from orange peels – Targeting leukaemia's gene addiction – Pea‐derived solar cells – HIV is a kick in the head – Nano‐scale DNA reader – Membrane in black – Cheese improves the immune response of elderly – Synthetic proteins built from standard parts – Therapeutic proteins produced in algae – Biosensor detects 100 mycoplasma cells – Protecting maggots against bacteria – Advanced biofuels from microbes – Fluorescent bacterial uptake – Two disparate stem cell states – Brachypodium genome sequenced

Encyclopedia of Life Sciences: Nuclear transfer for cell lines

WIREs Nanomedicine and Nanobiotechnology: Nanoparticle detection of respiratory infection

Journal Highlights: Biocatalysis – Synthetic Biology

In the news: Nanobiotech to detect cancer

Most Read

Industry News: Biomarker assays for personalized medicine – Bioplastic industry defies economic crisis – SDS‐PAGE monitoring of mAB

Awards: BTJ Editors elected members of the US National Academy of Engineering (NAE)

Meeting highlight

Writing tips: Figure preparation made simple – Some useful tutorials on the web

Book Highlights:Molecular Biotechnology – Bacterial Signaling – Yeast

Test your knowledge:Do you recognize this?

WIREs Authors Spotlight:Nanotechnology and orthopedics