Cloning and disruption of the PpURA5 gene and construction of a set of integration vectors for the stable genetic modification of Pichia pastoris

Recycling selectable markers via Cre/loxP system for constructing Komagataella phaffii strains co-expressing multiple proteins

OBJECTIVE

A convenient strategy was developed to recycle selectable markers using Cre/loxP system for constructing Komagataella phaffii strains co-expressing multiple proteins.

RESULTS

A plasmid in this strategy was generated from pPICZαA with integration of lox71-Sh ble-lox66. Firstly, the plasmid was inserted with one target protein gene and then transformed into K. phaffii KM71. Secondly, the auxiliary plasmid pPICZαA/cre/his4 containing CRE recombinase gene was further chromosomally inserted to Sh ble gene therein. Finally, methanol induction was conducted to produce CRE for Cre/loxP-mediated recombination, and consequently, the sequence between lox71 and lox66 was deleted, leading to recycling of ZeoR and His- markers. Then the resulted strain expressing the one target protein was used as the host to which another target protein gene could be inserted by the same procedures.

CONCLUSIONS

With easy manipulation, the method was effective in recycling of the selectable markers, and consequently two protein genes were sequential integrated chromosomally and successfully co-expressed in the yeast.

A novel CRISPR/Cas9 system with high genomic editing efficiency and recyclable auxotrophic selective marker for multiple-step metabolic rewriting in Pichia pastoris

The methylotrophic budding yeast Pichia pastoris has been utilized to the production of a variety of heterologous recombinant proteins owing to the strong inducible alcohol oxidase promoter (pAOX1). However, it is difficult to use P. pastoris as the chassis cell factory for high-valuable metabolite biosynthesis due to the low homologous recombination (HR) efficiency and the limitation of handy selective markers, especially in the condition of multistep biosynthetic pathways. Hence, we developed a novel CRISPR/Cas9 system with highly editing efficiencies and recyclable auxotrophic selective marker (HiEE-ReSM) to facilitate cell factory in P. pastoris. Firstly, we improved the HR rates of P. pastoris through knocking out the non-homologous-end-joining gene (Δku70) and overexpressing HR-related proteins (RAD52 and RAD59), resulting in higher positive rate compared to the basal strain, achieved 97%. Then, we used the uracil biosynthetic genes PpURA3 as the reverse screening marker, which can improve the recycling efficiency of marker. Meanwhile, the HR rate is still 100% in uracil auxotrophic yeast. Specially, we improved the growth rate of uracil auxotrophic yeast strains by overexpressing the uracil transporter (scFUR4) to increase the uptake of exogenous uracil from medium. Meanwhile, we explored the optimal concentration of uracil (90 mg/L) for strain growth. In the end, the HiEE-ReSM system has been applied for the inositol production (250 mg/L) derived from methanol in P. pastoris. The systems will contribute to P. pastoris as an attractive cell factory for the complex compound biosynthesis through multistep metabolic pathway engineering and will be a useful tool to improve one carbon (C1) bio-utilization.

A multi-functional genetic manipulation system and its use in high-level expression of a β-mannanase mutant with high specific activity in Pichia pastoris

To further extend the practical application of a thermostable and acidic resistance β-mannanase (ManAK) in animal feed additives, an effective strategy that combined directed evolution and metabolic engineering was developed. Four positive mutants (P191M, P194E, S199G and S268Q) with enhanced specific activity (25.5%-60.9%) were obtained. The S199G mutant exhibited 56.7% enhancement of specific activity at 37°C and good thermostability, and this was selected for high-level expression in P. pastoris X33. A multi-functional and scarless genetic manipulation system was proposed and functionally verified (gene deletion, substitution/insertion and point mutation). This was then subjected to Rox1p (an oxygen related transcription regulator) deletion and Vitreoscilla haemoglobin (VHb) co-expression for high enzyme productivity in P. pastoris X33VIIManAKS199G . An excellent strain, named X33VIIManAKS199G ∆rox1::VHb, was achieved by combining these two factors, and then the maximum enzymatic activity was further increased to 3753 U ml-1 , which was nearly twice as much as the maximum production of ManAK in P. pastoris. This work provides a systematic and effective method to improve the enzymatic yield of β-mannanase, promotes the application of ManAK in feed additives, and also demonstrated that a scarless genetic manipulation tool is useful in P. pastoris.

Development of synthetic biology tools to engineer Pichia pastoris as a chassis for the production of natural products

The methylotrophic yeast Pichia pastoris (a.k.a. Komagataella phaffii) is one of the most commonly used hosts for industrial production of recombinant proteins. As a non-conventional yeast, P. pastoris has unique biological characteristics and its expression system has been well developed. With the advances in synthetic biology, more efforts have been devoted to developing P. pastoris into a chassis for the production of various high-value compounds, such as natural products. This review begins with the introduction of synthetic biology tools for the engineering of P. pastoris, including vectors, promoters, and terminators for heterologous gene expression as well as Clustered Regularly Interspaced Short Palindromic Repeats/CRISPR-associated System (CRISPR/Cas) for genome editing. This review is then followed by examples of the production of value-added natural products in metabolically engineered P. pastoris strains. Finally, challenges and outlooks in developing P. pastoris as a synthetic biology chassis are prospected.

Pichia pastoris protease-deficient and auxotrophic strains generated by a novel, user-friendly vector toolbox for gene deletion

Targeted gene knockouts play an important role in the study of gene function. For the generation of knockouts in the industrially important yeast Pichia pastoris, several protocols have been published to date. Nevertheless, creating a targeted knockout in P. pastoris still is a time-consuming process, as the existing protocols are labour intensive and/or prone to accumulate nucleotide mutations. In this study, we introduce a novel, user-friendly vector-based system for the generation of targeted knockouts in P. pastoris. Upon confirming the successful knockout, respective selection markers can easily be recycled. Excision of the marker is mediated by Flippase (Flp) recombinase and occurs at high frequency (≥95%). We validated our knockout system by deleting 20 (confirmed and putative) protease genes and five genes involved in biosynthetic pathways. For the first time, we describe gene deletions of PRO3 and PHA2 in P. pastoris, genes involved in proline, and phenylalanine biosynthesis, respectively. Unexpectedly, knockout strains of PHA2 did not display the anticipated auxotrophy for phenylalanine but rather showed a bradytroph phenotype on minimal medium hinting at an alternative but less efficient pathway for production of phenylalanine exists in P. pastoris. Overall, all knockout vectors can easily be adapted to the gene of interest and strain background by efficient exchange of target homology regions and selection markers in single cloning steps. Average knockout efficiencies for all 25 genes were shown to be 40%, which is comparably high.

Metabolic engineering of Pichia pastoris

Besides its use for efficient production of recombinant proteins the methylotrophic yeast Pichia pastoris (syn. Komagataella spp.) has been increasingly employed as a platform to produce metabolites of varying origin. We summarize here the impressive methodological developments of the last years to model and analyze the metabolism of P. pastoris, and to engineer its genome and metabolic pathways. Efficient methods to insert, modify or delete genes via homologous recombination and CRISPR/Cas9, supported by modular cloning techniques, have been reported. An outstanding early example of metabolic engineering in P. pastoris was the humanization of protein glycosylation. More recently the cell metabolism was engineered also to enhance the productivity of heterologous proteins. The last few years have seen an increased number of metabolic pathway design and engineering in P. pastoris, mainly towards the production of complex (secondary) metabolites. In this review, we discuss the potential role of P. pastoris as a platform for metabolic engineering, its strengths, and major requirements for future developments of chassis strains based on synthetic biology principles.

Acetamidase as a dominant recyclable marker for Komagataella phaffii strain engineering

We have investigated the use of the gene coding for acetamidase (amdS) as a recyclable dominant marker for the methylotrophic yeast Komagataella phaffii in order to broaden its genetic toolbox. First, the endogenous constitutive AMD2 gene (a putative acetamidase) was deleted generating strain LA1. A cassette (amdSloxP) was constructed bearing a codon-optimized version of the Aspergillus nidulans amdS gene flanked by loxP sites for marker excision with Cre recombinase. This cassette was successfully tested as a dominant selection marker for transformation of the LA1 strain after selection on plates containing acetamide as a sole nitrogen source. Finally, amdSloxP was used to sequentially disrupt the K. phaffii ADE2 and URA5 genes. After each disruption event, a Cre-mediated marker recycling step was performed by plating cells on medium containing fluoroacetamide. In conclusion, amdS proved to be a suitable tool for K. phaffii transformation and marker recycling thus providing a new antibiotic-free system for genetic manipulation of this yeast.

Recycling of a selectable marker with a self-excisable plasmid in Pichia pastoris

Pichia pastoris is a widely used heterologous protein production workhorse. However, with its multiple genetic modifications to solve bottlenecks for heterologous protein productivity, P. pastoris lacks selectable markers. Existing selectable marker recycling plasmids have drawbacks (e.g., slow growth and conditional lethality). Here, zeocin-resistance marker recycling vectors were constructed using the Cre/loxP recombination system. The vectors were used to (i) knock in heterologous phytase, xylanase and lipase expression cassettes, (ii) increase the phytase, xylanase and lipase gene copy number to 13, 5, and 5, respectively, with vector introduction and (iii) engineer the secretion pathway by co-overexpressing secretion helper factors (Sly1p and Sec1p) without introducing selectable markers, giving a phytase field of 0.833 g/L. The vectors allow selectable marker recycling and would be a useful tool to engineer P. pastoris for high heterologous protein productivity.

Multicopy plasmid integration in Komagataella phaffii mediated by a defective auxotrophic marker

Background

A commonly used approach to improve recombinant protein production is to increase the levels of expression by providing extra-copies of a heterologous gene. In Komagataella phaffii (Pichia pastoris) this is usually accomplished by transforming cells with an expression vector carrying a drug-resistance marker following a screening for multicopy clones on plates with increasingly higher concentrations of an antibiotic. Alternatively, defective auxotrophic markers can be used for the same purpose. These markers are generally transcriptionally impaired genes lacking most of the promoter region. Among the defective markers commonly used in Saccharomyces cerevisiae is leu2-d, an allele of LEU2 which is involved in leucine metabolism. Cells transformed with this marker can recover prototrophy when they carry multiple copies of leu2-d in order to compensate the poor transcription from this defective allele.

Results

A K. phaffii strain auxotrophic for leucine (M12) was constructed by disrupting endogenous LEU2. The resulting strain was successfully transformed with a vector carrying leu2-d and an EGFP (enhanced green fluorescent protein) reporter gene. Vector copy numbers were determined from selected clones which grew to different colony sizes on transformation plates. A direct correlation was observed between colony size, number of integrated vectors and EGFP production. By using this approach we were able to isolate genetically stable clones bearing as many as 20 integrated copies of the vector and with no significant effects on cell growth.

Conclusions

In this work we have successfully developed a genetic system based on a defective auxotrophic which can be applied to improve heterologous protein production in K. phaffii. The system comprises a K. phaffii leu2 strain and an expression vector carrying the defective leu2-d marker which allowed the isolation of multicopy clones after a single transformation step. Because a linear correlation was observed between copy number and heterologous protein production, this system may provide a simple approach to improve recombinant protein productivity in K. phaffii.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-017-0715-8) contains supplementary material, which is available to authorized users.

Recent advances of molecular toolbox construction expand Pichia pastoris in synthetic biology applications

Pichia pastoris: (reclassified as Komagataella phaffii), a methylotrophic yeast strain has been widely used for heterologous protein production because of its unique advantages, such as readily achievable high-density fermentation, tractable genetic modifications and typical eukaryotic post-translational modifications. More recently, P. pastoris as a metabolic pathway engineering platform has also gained much attention. In this mini-review, we addressed recent advances of molecular toolboxes, including synthetic promoters, signal peptides, and genome engineering tools that established for P. pastoris. Furthermore, the applications of P. pastoris towards synthetic biology were also discussed and prospected especially in the context of genome-scale metabolic pathway analysis.

Combinatorial optimization of CRISPR/Cas9 expression enables precision genome engineering in the methylotrophic yeast Pichia pastoris

The methylotrophic yeast Pichia pastoris (Komagataella phaffii) is one of the most commonly used expression systems for heterologous protein production. However the recombination machinery in P. pastoris is less effective in contrast to Saccharomyces cerevisiae, where efficient homologous recombination naturally facilitates genetic modifications. The lack of simple and efficient methods for gene disruption and specifically integrating cassettes has remained a bottleneck for strain engineering in P. pastoris. Therefore tools and methods for targeted genome modifications are of great interest. Here we report the establishment of CRISPR/Cas9 technologies for P. pastoris and demonstrate targeting efficiencies approaching 100%. However there appeared to be a narrow window of optimal conditions required for efficient CRISPR/Cas9 function for this host. We systematically tested combinations of various codon optimized DNA sequences of CAS9, different gRNA sequences, RNA Polymerase III and RNA Polymerase II promoters in combination with ribozymes for the expression of the gRNAs and RNA Polymerase II promoters for the expression of CAS9. Only 6 out of 95 constructs were functional for efficient genome editing. We used this optimized CRISPR/Cas9 system for gene disruption studies, to introduce multiplexed gene deletions and to test the targeted integration of homologous DNA cassettes. This system allows rapid, marker-less genome engineering in P. pastoris enabling unprecedented strain and metabolic engineering applications.

Protein expression in Pichia pastoris: recent achievements and perspectives for heterologous protein production

Pichia pastoris is an established protein expression host mainly applied for the production of biopharmaceuticals and industrial enzymes. This methylotrophic yeast is a distinguished production system for its growth to very high cell densities, for the available strong and tightly regulated promoters, and for the options to produce gram amounts of recombinant protein per litre of culture both intracellularly and in secretory fashion. However, not every protein of interest is produced in or secreted by P. pastoris to such high titres. Frequently, protein yields are clearly lower, particularly if complex proteins are expressed that are hetero-oligomers, membrane-attached or prone to proteolytic degradation. The last few years have been particularly fruitful because of numerous activities in improving the expression of such complex proteins with a focus on either protein engineering or on engineering the protein expression host P. pastoris. This review refers to established tools in protein expression in P. pastoris and highlights novel developments in the areas of expression vector design, host strain engineering and screening for high-level expression strains. Breakthroughs in membrane protein expression are discussed alongside numerous commercial applications of P. pastoris derived proteins.

Elimination of diaminopeptidase activity in Pichia pastoris for therapeutic protein production

Yeast are important production platforms for the generation of recombinant proteins. Nonetheless, their use has been restricted in the production of therapeutic proteins due to differences in their glycosylation profile with that of higher eukaryotes. The yeast strain Pichia pastoris is an industrially important organism. Recent advances in the glycoengineering of this strain offer the potential to produce therapeutic glycoproteins with sialylated human-like N- and O-linked glycans. However, like higher eukaryotes, yeast also express numerous proteases, many of which are either localized to the secretory pathway or pass through it en route to their final destination. As a consequence, nondesirable proteolysis of some recombinant proteins may occur, with the specific cleavage being dependent on the class of protease involved. Dipeptidyl aminopeptidases (DPP) are a class of proteolytic enzymes which remove a two-amino acid peptide from the N-terminus of a protein. In P. pastoris, two such enzymes have been identified, Ste13p and Dap2p. In the current report, we demonstrate that while the knockout of STE13 alone may protect certain proteins from N-terminal clipping, other proteins may require the double knockout of both STE13 and DAP2. As such, this understanding of DPP activity enhances the utility of the P. pastoris expression system, thus facilitating the production of recombinant therapeutic proteins with their intact native sequences.

New opportunities by synthetic biology for biopharmaceutical production in Pichia pastoris

Biopharmaceuticals are an integral part of modern medicine and pharmacy. Both, the development and the biotechnological production of biopharmaceuticals are highly cost-intensive and require suitable expression systems. In this review we discuss established and emerging tools for reengineering the methylotrophic yeast Pichia pastoris for biopharmaceutical production. Recent advancements of this industrial expression system through synthetic biology include synthetic promoters to avoid methanol induction and to fine-tune protein production. New platform strains and molecular cloning tools as well as in vivo glycoengineering to produce humanized glycoforms have made P. pastoris an important host for biopharmaceutical production.

Characterization of the Pichia pastoris protein-O-mannosyltransferase gene family

The methylotrophic yeast, Pichiapastoris, is an important organism used for the production of therapeutic proteins. However, the presence of fungal-like glycans, either N-linked or O-linked, can elicit an immune response or enable the expressed protein to bind to mannose receptors, thus reducing their efficacy. Previously we have reported the elimination of β-linked glycans in this organism. In the current report we have focused on reducing the O-linked mannose content of proteins produced in P. pastoris, thereby reducing the potential to bind to mannose receptors. The initial step in the synthesis of O-linked glycans in P. pastoris is the transfer of mannose from dolichol-phosphomannose to a target protein in the yeast secretory pathway by members of the protein-O-mannosyltransferase (PMT) family. In this report we identify and characterize the members of the P. pastoris PMT family. Like Candida albicans, P. pastoris has five PMT genes. Based on sequence homology, these PMTs can be grouped into three sub-families, with both PMT1 and PMT2 sub-families possessing two members each (PMT1 and PMT5, and PMT2 and PMT6, respectively). The remaining sub-family, PMT4, has only one member (PMT4). Through gene knockouts we show that PMT1 and PMT2 each play a significant role in O-glycosylation. Both, by gene knockouts and the use of Pmt inhibitors we were able to significantly reduce not only the degree of O-mannosylation, but also the chain-length of these glycans. Taken together, this reduction of O-glycosylation represents an important step forward in developing the P. pastoris platform as a suitable system for the production of therapeutic glycoproteins.

Conjugation site heterogeneity causes variable electrostatic properties in Fc conjugates

Immunoconjugates, including antibody-drug conjugates and Fc-conjugates, represent a rapidly growing class of therapeutics undergoing clinical development. Despite their growing popularity, the high intrinsic heterogeneity of immunoconjugates often complicates the development process and limits their widespread application. In particular, immunoconjugate charge variants exhibit markedly different colloidal stabilities, solubilities, pharmacokinetics, and tissue distributions. Charge variants arise spontaneously due to degradation and, depending on the type of drug, linker, and conjugation site, through drug conjugation. Electrostatic changes in naked antibodies often result in poor performance characteristics, and therefore, charge alterations due to degradation are critical to control. Charge properties are expected to be equally important to producing well-behaved ADCs. Charge-based methods of analysis, such as isoelectric focusing and ion exchange chromatography, are capable of probing the underlying complexities within immunoconjugate drug products. Despite the utility of these methods, there are only a few published reports of charge-based assays applied to immunoconjugates. In the present study, we sought to identify the effects of chemical conjugation on the electrostatic properties of Fc-conjugates. In order to minimize the effects of post-translational modifications (e.g., deamidation), a single Fc charge variant was isolated prior to conjugation of a fluorescent probe, Alexa Fluor 350, to the side chains of lysine residues. The resulting Fc-conjugates were assessed by a variety of analytical techniques, including isoelectric focusing and ion exchange chromatography, to determine their charge properties.

A color-based stable multi-copy integrant selection system for Pichia pastoris using the attenuated ADE1 and ADE2 genes as auxotrophic markers

The methylotropic yeast Pichia pastoris has been used for more than two decades to successfully produce a large number of recombinant proteins. Currently, a wide variety of auxotrophic and drug based selection markers are employed to screen for clones expressing the protein of interest. For most proteins an increased copy number of the integrated plasmid results in higher levels of expression, but these multi-copy integrants can be unstable due to the propensity of P. pastoris for homologous recombination. Here we describe a multi-copy selection system based on ade1 and ade2 auxotrophic parent strains and the respective attenuated markers with truncated promoter regions. We show that for all four proteins we tested, the use of the attenuated markers leads to increased protein expression when compared with selection based on the full strength markers. The fact that the adenine auxotrophic strains grow more slowly than the complemented counterparts essentially ensures the stability of multi-copy integration. At the same time, the accumulation of a red dye in the auxotrophic strains also provides an easy, color-based selection for transformants with multiple copies.

Optimization of erythropoietin production with controlled glycosylation-PEGylated erythropoietin produced in glycoengineered Pichia pastoris

Pichia pastoris is a methylotropic yeast that has gained great importance as an organism for protein expression in recent years. Here, we report the expression of recombinant human erythropoietin (rhEPO) in glycoengineered P. pastoris. We show that glycosylation fidelity is maintained in fermentation volumes spanning six orders of magnitude and that the protein can be purified to high homogeneity. In order to increase the half-life of rhEPO, the purified protein was coupled to polyethylene glycol (PEG) and then compared to the currently marketed erythropoiesis stimulating agent, Aranesp(®) (darbepoetin). In in vitro cell proliferation assays the PEGylated protein was slightly, and the non-PEGylated protein was significantly more active than comparator. Pharmacodynamics as well as pharmacokinetic activity of PEGylated rhEPO in animals was comparable to that of Aranesp(®). Taken together, our results show that glycoengineered P. pastoris is a suitable production host for rhEPO, yielding an active biologic that is comparable to those produced in current mammalian host systems.

Elimination of β-mannose glycan structures in Pichia pastoris

The methylotrophic yeast, Pichia pastoris, is an important organism used for the production of therapeutic proteins. However, the presence of fungal-like glycans, such as those containing β-mannose (Man) linkages, can elicit an immune response or bind to Man receptors, thus reducing their efficacy. Recent studies have confirmed that P. pastoris has four genes from the β-mannosyl transferase (BMT) family and that Bmt2p is responsible for the majority of β-Man linkages on glycans. While expressing recombinant human erythropoietin (rhEPO) in a developmental glycoengineered strain devoid of BMT2 gene expression, cross-reactivity was observed with an antibody raised against host cell antigens. Treatment of the rhEPO with protein N-glycosidase F eliminated cross-reactivity, indicating that the antigen was associated with the glycan. Thorough analysis of the glycan profile of rhEPO demonstrated the presence of low amounts of α-1,2-mannosidase resistant high-Man glycoforms. In an attempt to eliminate the α-mannosidase resistant glycoforms, we used a systemic approach to genetically knock-out the remaining members of the BMT family culminating in a quadruple bmt2,4,1,3 knock-out strain. Data presented here conclude that the additive elimination of Bmt2p, Bmt3p and Bmt1p activities are required for total abolition of β-Man-associated glycans and their related antigenicity. Taken together, the elimination of β-Man containing glycoforms represents an important step forward for the Pichia production platform as a suitable system for the production of therapeutic glycoproteins.

Sequential deletion of Pichia pastoris genes by a self-excisable cassette

A rapid and convenient method is presented for unmarked gene deletions in Pichia pastoris. Cre/mutated lox system, Zeocin(®) (Invitrogen) resistance marker and homologous arms were spliced together by fusion PCR to generate the gene disruption cassettes (homologous region-lox71-Cre-ZeoR-lox66-homologous region), which could be integrated into the P. pastoris genome via homologous recombination. After transferring double-cross-over recombinants to methanol induction medium, transient expression of Cre recombinase caused the recombination of lox71-Cre-ZeoR-lox66 fragment into a double-mutant lox72 site, thus excising the Cre-ZeoR cassette from the P. pastoris genome. As the double-mutant lox72 site displays strongly reduced binding affinity for Cre recombinase, this method could be used sequentially to disrupt P. pastoris genes without introducing selectable markers. The effectiveness of this strategy was verified by introducing both single and double gene deletions into the P. pastoris genome.

Development of fully functional proteins with novel glycosylation via enzymatic glycan trimming

Recombinant glycoproteins present unique challenges to biopharmaceutical development, especially when efficacy is affected by glycosylation. In these cases, optimizing the protein's glycosylation is necessary, but difficult, since the glycan structures cannot be genetically encoded, and glycosylation in nonhuman cell lines can be very different from human glycosylation profiles. We are exploring a potential solution to this problem by designing enzymatic glycan optimization methods to produce proteins with useful glycan compositions. To demonstrate viability of this new approach to generating glycoprotein-based pharmaceuticals, the N-linked glycans of a model glycoprotein, ribonuclease B (RNase B), were modified using an alpha-mannosidase to produce a new glycoprotein with different glycan structures. The secondary structure of the native and modified glycoproteins was retained, as monitored using circular dichroism. An assay was also developed using an RNA substrate to verify that RNase B had indeed retained its function after being subjected to the necessary glycan modification conditions. This is the first study that verifies both activity and secondary structure of a glycoprotein after enzymatic glycan trimming for use in biopharmaceutical development methods. The evidence of preserved structure and function for a modified glycoprotein indicates that extracellular enzymatic modification methods could be implemented in producing designer glycoproteins.

Targeting a homogeneously glycosylated antibody Fc to bind cancer cells using a synthetic receptor ligand

The targeting of a glycosylated antibody Fc fragment to bind to cancer cells by site-selective incorporation of a synthetic ligand is described. Homogeneously glycosylated immunoglobulin G subclass 1 fragment crystallizable (IgG1 Fc) was produced by expression in a glycosylation-deficient yeast strain and subsequent treatment with mannosidase IA. A N-terminal cysteine was generated on the expressed IgG1 Fc by utilizing proteolytic processing enzymes in the yeast secretory pathway. A cyclic RGD peptide thioester 2 was synthesized and then site-selectively attached to the N-terminus of the IgG1 Fc glycoprotein using native chemical ligation. The resulting chemically modified antibody fragment, RGD-Man(5)-IgG1 Fc (5), retained biological activity similar to that of the free cyclic RGD peptide 1 when assayed for its ability to both promote and inhibit the adhesion of alpha(v)beta(3) integrin receptor-expressing WM-115 melanoma cells. In addition, fluorescent microscopy experiments were conducted using FITC-labeled 5 and confirmed binding of 5 to WM-115 melanoma cells. Site-selectively modified antibody fragments such as the one described here may be used to combine the beneficial properties of synthetic receptor ligands with antibody fragments to develop useful biochemical tools and improved therapeutics. The methods described here can also be used to produce glycoprotein fragments for the chemoenzymatic synthesis of homogeneous glycoproteins.

Improved gene disruption method and Cre-loxP mutant system for multiple gene disruptions in Hansenula polymorpha

In H. polymorpha, there is still a lack of a highly efficient gene disruption method. To help address this issue, we presented a simple and efficient method for both single and multiple gene disruptions in H. polymorpha. The knockout system combined a variation of sticky-end polymerase chain reaction method (SEP), split marker deletion method, co-transformation of single-stranded DNA and mutant Cre-loxP system. Using a slightly modified LiAc/SS-DNA/PEG procedure, the co-transformation double-stranded split marker constructs together with single-stranded split marker constructs resulted in at least 70% homologous recombination events when the homologous genomic DNA fragment had a size of approximately 500bp. Our evidence suggested that single-stranded DNA may be responsible for the increased gene disruption efficiency. We demonstrated the effectiveness of the method for gene disruption by constructing both single and double gene disruptions at the ALG3 and URA5 loci in the same genetic background. The method described here presents an improved strategy for gene disruption and a potential application for investigation of biological processes in other yeast strains.

Expression of GFP using Pichia pastoris vectors with zeocin or G-418 sulphate as the primary selectable marker

Pichia pastoris is a popular host organism for expressing heterologous proteins, and various expression vectors for this yeast are currently available. Recently, vectors containing novel dominant antibiotic resistance markers have become a strong and developing field of research for this methylotropic yeast strain. We have developed new P. pastoris expression vectors, the pPICKanMX6 and pPICKanMX6alpha series. These vectors were constructed by replacing the zeocin resistance gene of the pPICZA, B, C and pPICZalphaA, B and C vectors with the Tn903 kan(R) marker from pFA6a KanMX6, which confers G-418 sulphate resistance in P. pastoris. The limits of antibiotic resistance in two transformant yeast strains were investigated, and the selection marker was shown to be stably retained. To demonstrate their usefulness, a gene encoding hexa-histidine-tagged green fluorescent protein (GFPH6) was cloned into one of the new vectors and GFP expression examined in P. pastoris cells. The protein expression levels using the pPICKanMX6B vector were comparable with that using the original plasmid, based on zeocin resistance as seen by yeast cell fluorescence. Moreover, GFPH6 was able to be isolated by immobilized metal ion affinity chromatography (IMAC) from lysates of both yeast strains. A model reporter construct has been used to demonstrate successful recombinant protein expression and its subsequent purification using these new vectors. Corresponding vectors can now also be engineered with foreign gene expression under the control of various different promoters, to increase the flexibility of P. pastoris as a cellular factory for heterologous protein production.

Classical genetics

A significant advantage of Pichia pastoris as an experimental system is the ability to readily bring to bear both classical and molecular genetic approaches to a research problem. Although the advent of yeast molecular genetics has introduced new and exciting capabilities, classical genetics remains the approach of choice in many instances. These include the generation of mutations in previously unidentified genes (mutagenesis), the removal of unwanted secondary mutations (backcrossing), the assignment of mutations to specific genes (complementation analysis), and the construction of strains with new combinations of mutant alleles. This chapter describes these genetic manipulation methods for P. pastoris. In addition, certain yeast genes are essential for survival of the organism. However, determining whether a newly cloned gene is essential or not can be difficult with P. pastoris. In this chapter, we also describe a series of experiments to investigate the potential essential nature of a cloned gene in this yeast.

Vectors and strains for expression

Selection of both an appropriate expression vector and corresponding strain is crucial for successful expression of heterologous proteins in Pichia pastoris. This chapter explores both the standard and new vector/strain options available for protein expression in this yeast. Incorporated into expression vectors are selectable markers based on biosynthetic pathway genes, dominant drug resistance, or the P. pastoris formaldehyde dehydrogenase gene (FLD1). Novel strains available for expression include those that increase secretion of heterologous protein by overexpressing eukaryotic protein disulfide isomerase, and those that decrease hyperglycosylation or provide human-type glycosylation. This chapter also discusses methods to create multicopy strains that will potentially provide optimized expression of recombinant proteins in P. pastoris.

A simple and effective chromosome modification method for large-scale deletion of genome sequences and identification of essential genes in fission yeast

The technologies for chromosome modification developed to date are not satisfactorily universal, owing to the typical requirements for special enzymes and sequences. In the present report, we propose a new approach for chromosome modification in Schizosaccharomyces pombe that does not involve any special enzymes or sequences. This method, designated the 'Latour system', has wide applicability with extremely high efficiency, although both the basic principle and the operation are very simple. We demonstrate the ability of the Latour system to discriminate essential genes, with a long chromosomal area of 100 kb containing 33 genes deleted simultaneously and efficiently. Since no foreign sequences are retained after deletion using the Latour system, this system can be repeatedly applied at other sites. Provided that a negative selectable marker is available, the Latour system relies solely upon homologous recombination, which is highly conserved in living organisms. For this reason, it is expected that the system will be applicable to various yeasts.

Construction and characterization of Pichia pastoris strains for labeling aromatic amino acids in recombinant proteins

Strains of the methylotrophic yeast Pichia pastoris auxotrophic for the aromatic amino acids (tyrosine, phenylalanine, and tryptophan) have been constructed by targeted gene disruption for protein labeling applications. Three strains, with defects in ARO1 (coding for a homolog of the arom pentafunctional enzyme), ARO7 (coding for chorismate mutase), and TYR1 (coding for prephenate dehydrogenase), have been engineered in a P. pastoris ura3Delta1 parent strain using standard methods. The nutritional requirements of these auxotrophic strains have been characterized and their utility as expression hosts for labeling recombinant proteins has been demonstrated. All three strains show a surprising sensitivity to rich culture medium and must be grown in supplemented minimal medium. The tyr1::URA3 strain in particular is strongly inhibited by tryptophan, and to a lesser extent by phenylalanine, leucine, and isoleucine. Highly efficient incorporation of exogenously supplied amino acids by these three auxotroph strains has been demonstrated using recombinant galactose oxidase. Stereochemically pure l-amino acids and racemic d,l-mixtures serve nearly equally well to support protein expression and labeling. These strains allow efficient labeling of aromatic amino acids in recombinant proteins, supporting NMR structural biology and a wide range of other biophysical studies.

Cloning and disruption of thePichia pastoris ARG1, ARG2, ARG3, HIS1, HIS2, HIS5, HIS6 genes and their use as auxotrophic markers

Screening of a partial genomic database of Pichia pastoris allowed us to identify the ARG1, ARG2, ARG3, HIS1, HIS2, HIS5 and HIS6 genes, based on homology to their Saccharomyces cerevisiae counterparts. Based on the cloned sequences, a set of disruption vectors was constructed, using the previously described PpURA5-blaster as a selectable marker, and the cloned genes were individually disrupted. All disruptants exhibited the expected auxotrophic phenotypes, with only the his2 knockouts displaying a bradytroph phenotype. To allow their use as auxotrophic markers, we amplified the open reading frames and respective promoters and terminator regions of PpARG1, PpARG2, PpARG3, PpHIS1, PpHIS2 and PpHIS5. We then designed a set of integration vectors harbouring cassettes of the ARG pathway as selectable markers, to disrupt the genes of the HIS pathway and vice versa. Employing this strategy, we devised a scheme allowing for the rapid and stable introduction of several heterologous genes into the genome of P. pastoris without the need for recyclable markers or strains with multiple auxotrophies. Furthermore, simple replica-plating, instead of cost-consuming and labour-intensive colony PCR or Southern analysis, can be used to identify positive transformants, making this approach amendable for initial high-throughput applications, which can then be followed up by a more careful analysis of the selected transformants.