A Cobalt(II)-containing Metal-Organic Framework Showing Catalytic Activity in Oxidation Reactions

Fabrication and characterization of a novel catalyst based on modified zirconium metal-organic-framework for synthesis of polyhydroquinolines

A novel catalyst was fabricated in this study based on zirconium MOF modified with pyridine carboxaldehyde in a solvothermal reaction, embedded with cerium. In order to confirm the catalyst structure, various characterization techniques, including FTIR, Far IR, EDX, XRD, TGA, FE-SEM, ICP, and BET analyses, were employed. The results indicated that the UiO-66-Pyca-Ce (III) catalyst had a Langmuir surface area of 501.63 m2/g, a pore volume of 0.28 cm3/g, and a pore size of 2.27 nm. To study catalytic activity, a sequential approach of Knoevenagel condensation and Michael addition was used to synthesize various polyhydroquinoline derivatives. The reaction took place at ambient temperature. The UiO-66-Pyca-Ce (III) catalyst demonstrated high efficacy (90%) and reusability in asymmetric synthesis of polyhydroquinoline derivatives for several reasons, including the possession of three Lewis acid activation functions.

Synthesis of UiO-66-Sal-Cu(OH)2 by a Simple and Novel Method: MOF-Based Metal Thin Film as a Heterogeneous Catalyst for Olefin Oxidation

Metal-organic frameworks (MOFs), particularly UiO-66-NH₂, are employed as a catalyst in many industrial catalyst applications. As converting catalysts into thin film significantly increases their catalytic properties for the epoxidation of olefins, we report a general approach to synthesizing MOF thin films (UiO-66-Sal-Cu(OH)₂). Using the postsynthesis method (PSM), UiO-66-NH₂ was functionalized with salicylaldehyde and entrapped on copper hydroxide nanoparticle surfaces using a modern strategy (MOF thin film). We used field-emission scanning electron microscopy (FE-SEM), EDX (energy-dispersive X-ray analysis), XRD (X-ray diffraction), FT-IR (Fourier transform infrared), BET (Brunauer-Emmett-Teller), TGA (thermogravimetric analysis), XPS (X-ray photoelectron spectroscopy), and ICP-MS (inductively coupled plasma mass spectrometry) to determine the structure and morphology of the synthesized UiO-66-Sal-Cu(OH)₂. The oxidation of cyclooctene by the UiO-66-Sal-Cu(OH)₂ thin film was studied. Due to its advantages, such as being environmentally friendly (base metal-loaded catalyst, room temperature, solvent-free reaction), reusability, and high yield, this compound can be an appropriate catalyst for the oxidation of olefins.

Building a Pyrazole-Benzothiadiazole-Pyrazole Photosensitizer into Metal-Organic Frameworks for Photocatalytic Aerobic Oxidation

Charge separation plays a crucial role in regulating photochemical properties and therefore warrants consideration in designing photocatalysts. Metal-organic frameworks (MOFs) are emerging as promising candidates for heterogeneous photocatalysis due to their structural designability and tunability of photon absorption. Herein, we report the design of a pyrazole-benzothiadiazole-pyrazole organic molecule bearing a donor-acceptor-donor conjugated π-system for fast charge separation. Further attempts to integrate such a photosensitizer into MOFs afford a more effective heterogeneous photocatalyst (JNU-204). Under visible-light irradiation, three aerobic oxidation reactions involving different oxygenation pathways were achieved on JNU-204. Recycling experiments were conducted to demonstrate the stability and reusability of JNU-204 as a robust heterogeneous photocatalyst. Furthermore, we illustrate its applications in the facile synthesis of pyrrolo[2,1-a]isoquinoline-containing heterocycles, core skeletons of a family of marine natural products. JNU-204 is an exemplary MOF platform with good photon absorption, suitable band gap, fast charge separation, and extraordinary chemical stability for proceeding with aerobic oxidation reactions under visible-light irradiation.

Cobalt-Based Metal Organic Frameworks as Solids Catalysts for Oxidation Reactions

Metal organic frameworks (MOFs) are porous crystalline solids whose frameworks are constituted by metal ions/nodes with rigid organic linkers leading to the formation of materials having high surface area and pore volume. One of the unique features of MOFs is the presence of coordinatively unsaturated metal sites in their crystalline lattice that can act as Lewis acid sites promoting organic transformations, including aerobic oxidation reactions of various substrates such as hydrocarbons, alcohols, and sulfides. This review article summarizes the existing Co-based MOFs for oxidation reactions organized according to the nature of substrates like hydrocarbon, alcohol, olefin, and water. Both aerobic conditions and peroxide oxidants are discussed. Emphasis is placed on comparing the advantages of using MOFs as solid catalysts with respect to homogeneous salts in terms of product selectivity and long-term stability. The final section provides our view on future developments in this field.

The role of metal–organic porous frameworks in dual catalysis

Metal–organic frameworks (MOFs) are a valuable group of porous crystalline solids with inorganic and organic parts that can be used in dual catalysis.

Pillar-Layered Metal-Organic Frameworks Based on a Hexaprismane [Co6(μ3-OH)6] Cluster: Structural Modulation and Catalytic Performance in Aerobic Oxidation Reaction

Embedding a functional metal-oxo cluster within the matrix of metal-organic frameworks (MOFs) is a feasible approach for the development of advanced porous materials. Herein, three isoreticular pillar-layered MOFs (Co₆-MOF-1-3) based on a unique [Co₆(μ₃-OH)₆] cluster were designed, synthesized, and structurally characterized. For these Co₆-MOFs, tuning of the framework backbone was facilitated due to the existence of second ligands, which results in adjustable apertures (8.8 to 13.4 Å) and high Brunauer-Emmett-Teller surfaces (1896-2401 m² g^-1). As the [Co₆(μ₃-OH)₆] cluster has variable valences, these MOFs were then utilized as heterogeneous catalysts for the selective oxidation of styrene and benzyl alcohol, showing high conversion (>90%) and good selectivity. The selectivity of styrene to styrene oxide surpassed 80% and that of benzyl alcohol to benzaldehyde was up to 98%. The calculated TOF values show that the increase of reaction rate is positively correlated with the enlargement of pore sizes in these MOFs. Further, a stability test and cycling experiment proved that these Co₆-MOFs have well-observed stability and recyclability.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

Redox-Active Cobalt(II/III) Metal-Organic Framework for Selective Oxidation of Cyclohexene

We report herein a new cobalt(II/III) mixed-valence metal-organic framework formulated as [Co^IICo₂^III(μ₃-O)(bdc)₃(tpt)]·guest 1, where bdc = benzene-1,4-dicarboxylate and tpt = 2,4,6-tri(4-pyridinyl)-1,3,5-triazine, which can be used as a redox-active heterogeneous catalyst for selective oxidation of cyclohexene on the allylic position without destroying the adjacent double bond. Two oxidants were chosen to demonstrate this result. For using tert-butyl hydroperoxide, the conversion rate is 63% and only allylic oxidation products ( tert-butyl-2-cyclohexenyl-1-peroxide, 86%; 2-cyclohexen-1-one, 14%) are found, whereas if using O₂ as oxidant, a total conversion of 38% is achieved and also only the allylic oxidation products (cyclohexenyl hydroperoxide, 72%; 2-cyclohexen-1-one, 20%; and cyclohex-2-en-1-ol, 8%) are found. The absence of any adduct on the double bond may be due to the unique radical chain mechanism triggered by the mixed-valent [Co^IICo₂^III(μ₃-O)] centers.

A highly efficient heterogeneous catalyst of cobalt-based coordination polymers for aerobic epoxidation of cyclohexene

A novel heterogeneous catalyst of cobalt-based coordination polymers using a tyrosine-based derivative has been successfully constructed, and it exhibits high catalytic activity in changing the reaction pathway and lowering the activation energy to 25.5 kJ mol⁻¹.

A Series of Robust Copper-Based Triazolyl Isophthalate MOFs: Impact of Linker Functionalization on Gas Sorption and Catalytic Activity †

The synthesis and characterization of an isomorphous series of copper-containing microporous metal-organic frameworks (MOFs) based on triazolyl isophthalate linkers with the general formula ∞3[Cu₄(μ₃-OH)₂(R¹-R²-trz-ia)₃(H₂O)_x] are presented. Through size adjustment of the alkyl substituents R¹ and/or R² at the linker, the impact of linker functionalization on structure-property relationships was studied. Due to the arrangement of the substituents towards the cavities, the porosity (pore fraction 28%–39%), as well as the pore size can be adjusted by the size of the substituents of the triazole ring. Thermal analysis and temperature-dependent PXRD studies reveal a thermal stability of the MOFs up to 230 °C due to increasing framework stability through fine-tuning of the linker substitution pattern. Adsorption of CO₂ (298 K) shows a decreasing maximum loading with increasing steric demand of the substituents of the triazole ring. Furthermore, the selective oxidation of cyclohexene with tert-butyl hydroperoxide (TBHP) is studied over the MOFs at 323 K in liquid chloroform. The catalytic activity increases with the steric demand of the substituents. Additionally, these isomorphous MOFs exhibit considerable robustness under oxidizing conditions confirmed by CO₂ adsorption studies, as well as by the catalytic selective oxidation experiments.

A combined continuous wave electron paramagnetic resonance and DFT calculations of copper-doped 3∞[Cd0.98Cu0.02(prz-trz-ia)] metal–organic framework

Successful combination of EPR and DFT was applied for investigation the novel heteronuclear MOF compounds.

Structures of Metal-Organic Frameworks with Rod Secondary Building Units

Rod MOFs are metal-organic frameworks in which the metal-containing secondary building units consist of infinite rods of linked metal-centered polyhedra. For such materials, we identify the points of extension, often atoms, which define the interface between the organic and inorganic components of the structure. The pattern of points of extension defines a shape such as a helix, ladder, helical ribbon, or cylinder tiling. The linkage of these shapes into a three-dimensional framework in turn defines a net characteristic of the original structure. Some scores of rod MOF structures are illustrated and deconstructed into their underlying nets in this way. Crystallographic data for all nets in their maximum symmetry embeddings are provided.

Heterogeneous self-supported dirhodium(ii) catalysts with high catalytic efficiency in cyclopropanation – a structural study

Catalytically active dirhodium sheet-like coordination polymers are synthesized from their precursors via ligand exchange.

Methane storage in flexible metal-organic frameworks with intrinsic thermal management

As a cleaner, cheaper, and more globally evenly distributed fuel, natural gas has considerable environmental, economic, and political advantages over petroleum as a source of energy for the transportation sector. Despite these benefits, its low volumetric energy density at ambient temperature and pressure presents substantial challenges, particularly for light-duty vehicles with little space available for on-board fuel storage. Adsorbed natural gas systems have the potential to store high densities of methane (CH4, the principal component of natural gas) within a porous material at ambient temperature and moderate pressures. Although activated carbons, zeolites, and metal-organic frameworks have been investigated extensively for CH4 storage, there are practical challenges involved in designing systems with high capacities and in managing the thermal fluctuations associated with adsorbing and desorbing gas from the adsorbent. Here, we use a reversible phase transition in a metal-organic framework to maximize the deliverable capacity of CH4 while also providing internal heat management during adsorption and desorption. In particular, the flexible compounds Fe(bdp) and Co(bdp) (bdp(2-) = 1,4-benzenedipyrazolate) are shown to undergo a structural phase transition in response to specific CH4 pressures, resulting in adsorption and desorption isotherms that feature a sharp 'step'. Such behaviour enables greater storage capacities than have been achieved for classical adsorbents, while also reducing the amount of heat released during adsorption and the impact of cooling during desorption. The pressure and energy associated with the phase transition can be tuned either chemically or by application of mechanical pressure.

Facile redox state manipulation in Cu(i) frameworks by utilisation of the redox-active tris(4-(pyridin-4-yl)phenyl)amine ligand

Two Cu(i) frameworks were synthesised with the NPy₃ ligand and Cu(ii) salts to yield electroactive Cu(i) frameworks whose spectral properties varied as a function of the redox state.

Preparation and catalytic applications of nanomaterials: a review

The present review systematically summarizes the synthesis and specific catalytic applications of nanomaterials such as MSN, nanoparticles, LD hydroxides, nanobubbles, quantum dots,etc.

The Chemistry and Applications of Metal-Organic Frameworks

Crystalline metal-organic frameworks (MOFs) are formed by reticular synthesis, which creates strong bonds between inorganic and organic units. Careful selection of MOF constituents can yield crystals of ultrahigh porosity and high thermal and chemical stability. These characteristics allow the interior of MOFs to be chemically altered for use in gas separation, gas storage, and catalysis, among other applications. The precision commonly exercised in their chemical modification and the ability to expand their metrics without changing the underlying topology have not been achieved with other solids. MOFs whose chemical composition and shape of building units can be multiply varied within a particular structure already exist and may lead to materials that offer a synergistic combination of properties.

Hybrid organic–inorganic structured materials as single-site heterogeneous catalysts

Catalyst selectivity is associated with well-defined homogeneous active sites. Transition metal complexes and organocatalysts are highly active and selective in the homogeneous phase, and their heterogenization by incorporating them into inorganic solid materials allows combining their excellent catalytic activity with improved separation, recovering and recycling properties. In this article, we present the structural characteristics and catalytic properties of hybrid organic–inorganic materials in which the molecular catalysts are part of the inorganic structure, emphasizing the possibilities of periodic mesoporous hybrid materials and coordination polymers as single-site solid catalysts.