Catalytic Effect of Green CuO Nanoparticles on the Thermal Decomposition Kinetics of Ammonium Perchlorate

Biosynthesis of green CuO@C nanocomposite using Combretum indicum flower extract for organic dye removal: adsorption performance, modeling, and recyclability studies

Water contamination becomes one of the most high-priority environmental concerns, calling for the efficient treatment techniques. Bionanocomposites can be robust adsorbents, but the synthesis requires toxic chemicals or energy consuming and cause the secondary pollution. Green nanocomposites can be biogenically synthesized using the plant extract to end up with a critically safe strategy. Herein, we used the flower extract of Combretum indicum plant as a bio-based reductant and carbonaceous source for the green CuO@C nanocomposite. This green nanoadsorbent obtained a specific surface area of 17.33 m2/g, good crystallinity, and functional group-containing surface, i.e., -OH and -CONH-. We also conducted the optimization of parameters, i.e., concentration, CuO@C dose, pH, time, and temperature, and reached removal efficiencies towards malachite green (MG, 83.23%), Congo red (CR, 84.60%), brilliant blue (BB, 71.39%), and methylene blue (MB, 23.67%). The maximum adsorption capacities were found as ordered, MG (46.387 mg/g) > MB (23.154 mg/g) > BB (22.8 mg/g) > CR dye (11.063 mg/g). Through the intra-particle diffusion kinetic model, MG and BB adsorption endured a three-step process, while CR and MB adsorption was a two-step process. The recyclability of the green CuO@C nanocomposite was three cycles with 67.54% for the final cycle of BB removal. Moreover, the nanoadsorbent displayed a high stability, checked by X-ray diffraction, FT-IR analysis, EDX spectra, and SEM images. It is recommended that the green CuO@C nanocomposite biosynthesized using the Combretum indicum flower extract can be a good alternative for the dye treatment from wastewater.

The positive correlation between the dispersion and catalytic performance of Fe2O3 nanoparticles in nano-Fe2O3-ultrafine AP energetic composites supported by solid UV-vis spectroscopy

Recently, the widespread use of nanocatalytic materials has contributed to an enormous improvement in the performance of energetic materials, especially, highly dispersed nanomaterials. However, the lack of quantitative methods for analyzing the dispersion of nanomaterials limits their further widespread use. Although various techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), etc. are used to analyze the relative dispersion of nanomaterials, it is not possible to quantitatively analyze their dispersion. Therefore, there has been an effort to develop new methods for the quantitative analysis of nanocatalytic materials. Fortunately, we were able to analyze the dispersion of nanocatalytic materials using the difference in their UV absorbance. More importantly, we established the corresponding difference equation to quantify the dispersion of nanocatalytic materials, which is capable of quantifying the dispersion of nano-Fe2O3 in nano-Fe2O3-ultrafine AP composites. The accuracy of the difference equation was verified using a variety of techniques and the desired results were obtained. Based on the above conclusions, the quantitative analysis method for the dispersion of nanomaterials that we established is expected to be widely used and promote the development of energetic materials.

Construction of Hydrophobic Ammonium Perchlorate with Synergistic Catalytic Effect Based on Supramolecular Self-Assembly for Synchronously Catalyzing the Thermal Decomposition of Ammonium Perchlorate and the Combustion of Aluminum

Ammonium perchlorate (AP), as an important additive component of composite propellants, is critical to the combustion performance of propellants. Herein, AP@1H,1H,2H,2H-perfluorodecyltrichlorosilane (AP@PF) was prepared by establishing a tannic acid-iron ion (TA-Fe) supramolecular self-assembly layer on the AP surface and connecting the 1H,1H,2H,2H-perfluorodecyltrichlorosilane interfacial layer. Results demonstrate that TA-Fe and 1H,1H,2H,2H-perfluorodecyltrichlorosilane are uniformly bound to the surface layer of AP. AP@PF has a lower high-temperature thermal decomposition peak compared to AP. Meanwhile, the exothermic values of low-temperature thermal decomposition (338 J/g) and high-temperature thermal decomposition (597 J/g) of AP@PF are significantly higher than those of AP. In addition, AP@PF exhibits different surface interfacial properties, such as floating on the water surface and exhibiting a static contact angle of 105° on water. AP@PF shows almost no moisture absorption after aging in humid air for 30 days. The exothermic value of the mixture of AP@PF and aluminum powder (156 J/g) is significantly higher than that of the mixture of AP and aluminum (54 J/g), and the mixture of AP@PF and aluminum powder exhibits a higher calorific value and a stronger emission spectrum. Finally, the synergistic catalytic mechanism of AP@PF on the thermal decomposition of AP and the combustion of aluminum powder is also discussed.

Synthesis and characterization of copper oxide nanoparticles: its influence on corn (Z. mays) and wheat (Triticum aestivum) plants by inoculation of Bacillus subtilis

Nanotechnology is now playing an emerging role in green synthesis in agriculture as nanoparticles (NPs) are used for various applications in plant growth and development. Copper is a plant micronutrient; the amount of copper oxide nanoparticles (CuONPs) in the soil determines whether it has positive or adverse effects. CuONPs can be used to grow corn and wheat plants by combining Bacillus subtilis. In this research, CuONPs were synthesized by precipitation method using different precursors such as sodium hydroxide (0.1 M) and copper nitrate (Cu(NO₃)₂) having 0.1 M concentration with a post-annealing method. The NPs were characterized through X-ray diffraction (XRD), scanning electron microscope (SEM), and ultraviolet (UV) visible spectroscopy. Bacillus subtilis is used as a potential growth promoter for microbial inoculation due to its prototrophic nature. The JAR experiment was conducted, and the growth parameter of corn (Z. mays) and wheat (Triticum aestivum) was recorded after 5 days. The lab assay evaluated the germination in JARs with and without microbial inoculation under CuONP stress at different concentrations (25 and 50 mg). The present study aimed to synthesize CuONPs and systematically investigate the particle size effects of copper (II) oxide (CuONPs) (< 50 nm) on Triticum aestivum and Z. mays. In our results, the XRD pattern of CuONPs at 500 °C calcination temperature with monoclinic phase is observed, with XRD peak intensity slightly increasing. The XRD patterns showed that the prepared CuONPs were extremely natural, crystal-like, and nano-shaped. We used Scherrer's formula to calculate the average size of the particle, indicated as 23 nm. The X-ray diffraction spectrum of synthesized materials and SEM analysis show that the particles of CuONPs were spherical in nature. The results revealed that the synthesized CuONPs combined with Bacillus subtilis used in a field study provided an excellent result, where growth parameters of Z. Mays and Triticum aestivum such as root length, shoot length, and plant biomass was improved as compared to the control group.

Novel Microwave Synthesis of Copper Oxide Nanoparticles and Appraisal of the Antibacterial Application

The exceptional characteristics of bio-synthesized copper oxide nanoparticles (CuO NPs), including high surface-to-volume ratio and high-profit strength, are of tremendous interest. CuO NPs have cytotoxic, catalytic, antibacterial, and antioxidant properties. Fruit peel extract has been recommended as a valuable alternative method due to the advantages of economic prospects, environment-friendliness, improved biocompatibility, and high biological activities, such as antioxidant and antimicrobial activities, as many physical and chemical methods have been applied to synthesize metal oxide NPs. In the presence of apple peel extract and microwave (MW) irradiation, CuO NPs are produced from the precursor CuCl₂. 2H₂O. With the help of TEM analysis, and BET surface area, the average sizes of the obtained NPs are found to be 25-40 nm. For use in antimicrobial applications, CuO NPs are appropriate. Disk diffusion tests were used to study the bactericidal impact in relation to the diameter of the inhibition zone, and an intriguing antibacterial activity was confirmed on both the Gram-positive bacterial pathogen Staphylococcus aureus and Gram-negative bacterial pathogen Escherichia coli. Moreover, CuO NPs did not have any toxic effect on seed germination. Thus, this study provides an environmentally friendly material and provides a variety of advantages for biomedical applications and environmental applications.

One Pot Synthesis of Copper Oxide Nanoparticles for Efficient Antibacterial Activity

The unique semiconductor and optical properties of copper oxides have attracted researchers for decades. However, using fruit waste materials such as peels to synthesize the nanoparticles of copper oxide (CuO NPs) has been rarely described in literature reviews. The main purpose of this part of the research was to report on the CuO NPs with the help of apple peel extract under microwave irradiation. Metal salts and extracts were irradiated at 540 W for 5 min in a microwave in a 1:2 ratio. The crystallinity of the NPs was confirmed by the XRD patterns and the crystallite size of the NPs was found to be 41.6 nm. Elemental mapping of NPs showed homogeneous distributions of Cu and O. The NPs were found to contain Cu and O by EDX and XPS analysis. In a test involving two human pathogenic microbes, NPs showed antibacterial activity and the results revealed that the zone of inhibition grew significantly with respect to the concentration of CuO NPs. In a biofilm, more specifically, NPs at 25.0 µg/mL reduced mean thickness and biomass values of S. aureus and E. coli biofilms by >85.0 and 65.0%, respectively, with respect to untreated controls. In addition, environmentally benign materials offer a number of benefits for pharmaceuticals and other biomedical applications as they are eco-friendly and compatible.

Preparation of a Chitosan-Lead Composite Carbon Aerogel and Its Catalytic Thermal Decomposition Performance on Ammonium Perchlorate

Chitosan-lead (CS-Pb) carbon aerogels were prepared by ionic cross-linking and high-temperature carbonization using chitosan (CS) as the carbon precursor. The obtained carbon aerogels were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), and X-ray photoelectron spectroscopy (XPS). The obtained aerogels have a 3D structure and a large surface area, which can effectively prevent the agglomeration phenomenon of metals. Differential thermal analysis (DTA) was used to analyze the catalytic performance of a carbon aerogel for ammonium perchlorate (AP). The results showed that the CS-Pb carbon aerogel reduced the peak temperature of AP pyrolysis from 703.9 to 627.7 K. According to the Kissinger method calculations, the E_a of AP decomposition decreased about 27.2 kJ/mol. The TG data at different warming rates were analyzed by the Flynne-Walle-Ozawa (FWO) and Kissinger-Akahira-Sunose (KAS) methods, which are two of the isoconversion methods, and the activation energies of AP and AP+CS-Pb-3.5 were calculated. Between the conversion degrees (α) of 0.1 and 0.9, the E_a values obtained by the two isoconversion methods are similar and have a certain match. Also, the two isoconversion methods confirm Kissinger's calculation. Finally, thermogravimetry-mass spectrometry (TG-MS) was used to monitor the gases generated during the thermal decomposition of the AP+CS-Pb-3.5 system in real time.

Energetic bimetallic complexes as catalysts affect the thermal decomposition of ammonium perchlorate

Two bimetallic complexes of 4-hydroxy-3,5-dinitropyrazole, [K₂Mn(DNPO)₂(H₂O)₄]_n·2H₂O (BMEP-1) and [K₂Zn(DNPO)₂(H₂O)₆]_n (BMEP-2), were synthesized and characterized by IR spectroscopy and elemental analysis. The crystal structures of BMEP-1 and BMEP-2 were determined by single-crystal X-ray diffraction. It is noteworthy that these complexes presented different metal-organic frameworks. The thermal behaviors of BMEP-1 and BMEP-2 were investigated by differential scanning calorimetry and thermogravimetric analysis measurements. These bimetallic complexes exhibited high thermal stability (348.0 °C and 331.0 °C) due to their large coordination bonds and three-dimensional interconnected structure. The catalytic performances of BMEP-1 and BMEP-2 on the thermal decomposition of ammonium perchlorate were investigated by TGA-DSC, TGA-FTIR, and non-isothermal kinetic analyses. The results showed that BMEP-1 and BMEP-2 exhibited excellent catalytic performance in the thermal decomposition of ammonium perchlorate. Notably, there was only a single exothermic peak at 302.6 °C and 318.6 °C, and the activation energy values of ammonium perchlorate decreased to 123.88 kJ mol^-1 and 128.43 kJ mol^-1, respectively. TGA-FTIR results showed that BMEP-1 and BMEP-2, as effective components of catalysis, will promote the production of H₂O, N₂O, NO₂, and HCl in advance, during the thermal decomposition of ammonium perchlorate. BMEP-1 and BMEP-2 are expected to be two candidate additives for the catalytic decomposition of ammonium perchlorate in composite solid propellants.

Thermal kinetics, thermodynamics, decomposition mechanism, and thermal safety performance of typical ammonium perchlorate-based molecular perovskite energetic materials

In this work, we report the thermal kinetics, thermodynamics, and decomposition mechanism of AP-based molecular perovskite energetic materials and estimate their thermal safety performance. Typical AP-based molecular perovskite energetic materials, (H2dabco)[NH4(ClO4)3] (DAP-4), (H2pz)[NH4(ClO4)3](PAP-4), (H2mpz)[NH4(ClO4)3](PAP-M4), and (H2hpz)[NH4(ClO4)3] (PAP-H4), were synthesized and characterized. These were studied using differential scanning calorimetry (DSC). The results show that all of the obtained AP-based molecular perovskite energetic materials have higher thermal decomposition temperatures, and the peak temperatures are more than 360 °C. All follow random nucleation and growth models. Other thermodynamic parameters, such as the reaction enthalpy (ΔH), entropy change (ΔS), and Gibbs free energy (ΔG), show that they are generally thermodynamically stable. Moreover, their adiabatic induced temperatures were obtained; TD24 of DAP-4, PAP-4, PAP-M4, and PAP-H4 were 246.6, 201.2, 194.5, and 217.5 °C, respectively. This study offers an important and in-depth understanding of the thermal decomposition characteristics of AP-based molecular perovskite energetic materials and their potential applications.

Study on the thermal decomposition behavior of ammonium perchlorate catalyzed by Zn–Co cooperation in MOF

The combustion performance of solid propellants plays a decisive role in the overall application of rockets.

New Construction of Functionalized CuO/Al2O3 Nanocomposite-Based Polymeric Sensor for Potentiometric Estimation of Naltrexone Hydrochloride in Commercial Formulations

Electrically conductive polymeric nanocomposites with nanoparticles are adaptable types of nanomaterials that are prospective for various applications. The extraordinary features of copper oxide (CuO) and aluminium oxide (Al₂O₃) nanostructures, encourages extensive studies to prospect these metal oxide nanocomposites as potential electroactive materials in sensing and biosensing applications. This study suggested a new CuO/Al₂O₃ nanocomposite-based polymeric coated wire membrane sensor for estimating naltrexone hydrochloride (NTX) in commercial formulations. Naltrexone hydrochloride and sodium tetraphenylborate (Na-TPB) were incorporated in the presence of polymeric polyvinyl chloride (PVC) and solvent mediator o-nitrophenyloctyl ether (o-NPOE) to form naltrexone tetraphenylborate (NTX-TPB) as an electroactive material. The modified sensor using NTX-TPB-CuO/Al₂O₃ nanocomposite displayed high selectivity and sensitivity for the discrimination and quantification of NTX with a linearity range 1.0 × 10^-9-1.0 × 10^-2 mol L^-1 and a regression equation E_mV = (58.25 ± 0.3) log [NTX] + 754.25. Contrarily, the unmodified coated wire sensor of NTX-TPB exhibited a Nernstian response at 1.0 × 10^-5-1.0 × 10^-2 mol L^-1 and a regression equation E_mV = (52.1 ± 0.2) log [NTX] + 406.6. The suggested modified potentiometric system was validated with respect to various criteria using the methodology recommended guidelines.

Optimized energetic HNTO/AN co-crystal and its thermal decomposition kinetics in the presence of energetic coordination nanomaterials based on functionalized graphene oxide and cobalt

The present research aims to select the optimal molar ratio of hydrazine 3-nitro-1,2,4-triazol-5-one (HNTO) and ammonium nitrate (AN) to produce an energetic co-crystal. For a comparison purpose, the heat release, cost, density and hygroscopicity of the different co-crystals were evaluated. The obtained results indicated that HNTO/AN at the 1 : 3 ratio exhibited a higher heat release, better thermal stability, low water content and a reasonable cost, compared to other co-crystals. This new co-crystal was fully characterized through powder X-ray diffraction (XRD), infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC), confirming that this latter displayed similar characteristics to those of the co-crystal with a 1 : 1 ratio, which was recently developed. On the other hand, the catalytic activity of two energetic coordination polymers of triaminoguanidine-cobalt (T-Co) complexes, with or without graphene oxide (GO-T-Co-T), on the thermolysis of the developed co-crystal has been also assessed by DSC under non-isothermal conditions. It is revealed that these catalysts have greatly decreased the decomposition temperature of the HNTO/AN cocrystal. Moreover, because of the complete decomposition in the case of the (HNTO/AN)/GO-T-Co-T composite, the heat release has been increased as well. Isoconversional integral kinetic methods were exploited to determine the kinetic parameters of the different systems. According to the obtained results, these catalysts have a strong catalytic action on the decomposition of the co-crystal AN/HNTO for which the activation energy and the pre-exponential factor are considerably lowered. Consequently, the developed co-crystal and the energetic catalysts could be considered as potential ingredients for the next generation of composite solid propellant formulations.

In situ synthesis of oxidized MXene-based metal cobalt spinel nanocomposites for an excellent promotion in thermal decomposition of ammonium perchlorate

Oxidized MXene-supported MCo2O4 (oxidized MXene/MCo2O4, M = Mn, Zn, Cu and Co) nanocomposites with an excellent catalytic performance for AP decomposition were successfully synthesized through a facile hydrothermal assisted calcination method.

Facile synthesis of MXene-supported copper oxide nanocomposites for catalyzing the decomposition of ammonium perchlorate

MXene-supported CuO nanocomposites were synthesized by ice crystal templating and could effectively reduce the HTD temperature and increase the heat release of AP. A possible mechanism for the excellent catalytic performance was also proposed.