Overlapping distribution of the 130- and 110-kDa myosin I isoforms on rat liver membranes

Myosin 1b Regulates Amino Acid Transport by Associating Transporters with the Apical Plasma Membrane of Kidney Cells

Amino acid transporters (AATers) in the brush border of the apical plasma membrane (APM) of renal proximal tubule (PT) cells mediate amino acid transport (AAT). We found that the membrane-associated class I myosin myosin 1b (Myo1b) localized at the apical brush border membrane of PTs. In opossum kidney (OK) 3B/2 epithelial cells, which are derived from PTs, expressed rat Myo1b-GFP colocalized in patched microvilli with expressed mouse V5-tagged SIT1 (SIT1-V5), which mediates neutral amino acid transport in OK cells. Lentivirus-mediated delivery of opossum Myo1b-specific shRNA resulted in knockdown (kd) of Myo1b expression, less SIT1-V5 at the APM as determined by localization studies, and a decrease in neutral AAT as determined by radioactive uptake assays. Myo1b kd had no effect on Pi transport or noticeable change in microvilli structure as determined by rhodamine phalloidin staining. The studies are the first to define a physiological role for Myo1b, that of regulating renal AAT by modulating the association of AATers with the APM.

Myosin-1c regulates the dynamic stability of E-cadherin-based cell-cell contacts in polarized Madin-Darby canine kidney cells

Myo1c knockdown causes defects in E-cadherin localization, E-cadherin binding, and cell–cell contact of Madin–Darby canine kidney cells. Expression of wild-type Myo1c, but not motor-dead mutants or those unable to bind membrane, reverses the phenotype, evidence that Myo1c modulates the assembly/maintenance of adherens junctions.

Cooperation between cadherins and the actin cytoskeleton controls the formation and maintenance of cell–cell adhesions in epithelia. We find that the molecular motor protein myosin-1c (Myo1c) regulates the dynamic stability of E-cadherin–based cell–cell contacts. In Myo1c-depleted Madin–Darby canine kidney cells, E-cadherin localization was dis­organized and lateral membranes appeared less vertical with convoluted edges versus control cells. In polarized monolayers, Myo1c-knockdown (KD) cells were more sensitive to reduced calcium concentration. Myo1c separated in the same plasma membrane fractions as E-cadherin, and Myo1c KD caused a significant reduction in the amount of E-cadherin recovered in one peak fraction. Expression of green fluorescent protein (GFP)–Myo1c mutants revealed that the phosphatidylinositol-4,5-bisphosphate–binding site is necessary for its localization to cell–cell adhesions, and fluorescence recovery after photobleaching assays with GFP-Myo1c mutants revealed that motor function was important for Myo1c dynamics at these sites. At 18°C, which inhibits vesicle recycling, Myo1c-KD cells accumulated more E-cadherin–positive vesicles in their cytoplasm, suggesting that Myo1c affects E-cadherin endocytosis. Studies with photoactivatable GFP–E-cadherin showed that Myo1c KD reduced the stability of E-cadherin at cell–cell adhesions. We conclude that Myo1c stabilizes E-cadherin at adherens junctions in polarized epithelial cells and that the motor function and ability of Myo1c to bind membrane are critical.

Localization of myosin 1b to actin protrusions requires phosphoinositide binding

Myosin 1b (Myo1b), a class I myosin, is a widely expressed, single-headed, actin-associated molecular motor. Transient kinetic and single-molecule studies indicate that it is kinetically slow and responds to tension. Localization and subcellular fractionation studies indicate that Myo1b associates with the plasma membrane and certain subcellular organelles such as endosomes and lysosomes. Whether Myo1b directly associates with membranes is unknown. We demonstrate here that full-length rat Myo1b binds specifically and with high affinity to phosphatidylinositol 4,5-bisphosphate (PIP(2)) and phosphatidylinositol 3,4,5-triphosphate (PIP(3)), two phosphoinositides that play important roles in cell signaling. Binding is not Ca(2+)-dependent and does not involve the calmodulin-binding IQ region in the neck domain of Myo1b. Furthermore, the binding site is contained entirely within the C-terminal tail region, which contains a putative pleckstrin homology domain. Single mutations in the putative pleckstrin homology domain abolish binding of the tail domain of Myo1b to PIP(2) and PIP(3) in vitro. These same mutations alter the distribution of Myc-tagged Myo1b at membrane protrusions in HeLa cells where PIP(2) localizes. In addition, we found that motor activity is required for Myo1b localization in filopodia. These results suggest that binding of Myo1b to phosphoinositides plays an important role in vivo by regulating localization to actin-enriched membrane projections.

CIB1 and CaBP1 bind to the myo1c regulatory domain

Myo1c is a member of the myosin-I family that binds phosphoinositides and links the actin cytoskeleton to cellular membranes. Recent investigations suggest that targeting of myo1c to some subcellular regions requires the binding of an unknown protein to the IQ motifs in the myo1c regulatory domain. We identify two myristoylated proteins that bind the myo1c regulatory domain: calcium-binding protein 1 (CaBP1) and calcium- and integrin-binding-protein-1 (CIB1). CIB1 and CaBP1 interact with myo1c in vivo as determined by pull-down experiments and fluorescence microscopy where the endogenously expressed proteins show extensive cellular colocalization with myo1c. CIB1 and CaBP1 bind to the myo1c IQ motifs in the regulatory domain where they compete with calmodulin for binding. CaBP1 has a higher apparent affinity for myo1c than CIB1, and both proteins better compete with calmodulin in the presence of calcium. We propose that these proteins may play a role in specifying subcellular localization of myo1c.

The relationship between mitochondrial shape and function and the cytoskeleton

Mitochondria are crucial organelles for life and death of the cell. They are prominent players in energy conversion and integrated signaling pathways including regulation of Ca2+ signals and apoptosis. Their functional versatility is matched by their morphological plasticity and by their high mobility, allowing their transport at specialized cellular sites. This transport occurs by interactions with a variety of cytoskeletal proteins that also have the ability to influence shape and function of the organelle. A growing body of evidence suggests that mitochondria use cytoskeletal proteins as tracks for their movement; in turn, mitochondrial morphology and function is regulated via mostly uncharacterized pathways, by the cytoskeleton.

Myo1c binds tightly and specifically to phosphatidylinositol 4,5-bisphosphate and inositol 1,4,5-trisphosphate

Myosin-I is the single-headed member of the myosin superfamily that associates with acidic phospholipids through its basic tail domain. Membrane association is essential for proper myosin-I localization and function. However, little is known about the physiological relevance of the direct association of myosin-I with phospholipids or about phospholipid headgroup-binding specificity. To better understand the mechanism of myosin-I-membrane association, we measured effective dissociation constants for the binding of a recombinant myo1c tail construct (which includes three IQ domains and bound calmodulins) to large unilamellar vesicles (LUVs) composed of phosphatidylcholine and various concentrations of phosphatidylserine (PS) or phosphatidylinositol 4,5-bisphosphate (PIP(2)). We found that the myo1c-tail binds tightly to LUVs containing >60% PS but very weakly to LUVs containing physiological PS concentrations (<40%). The myo1c tail and not the IQ motifs bind tightly to LUVs containing 2% PIP(2). Additionally, we found that the myo1c tail binds to soluble inositol-1,4,5-trisphosphate with nearly the same affinity as to PIP(2) in LUVs, suggesting that myo1c binds specifically to the headgroup of PIP(2). We also show that a GFP-myosin-I-tail chimera expressed in epithelial cells is transiently localized to regions known to be enriched in PIP(2). Our results suggest that myo1c does not bind to physiological concentrations of PS but rather binds tightly to PIP(2).

Loop 1 of transducer region in mammalian class I myosin, Myo1b, modulates actin affinity, ATPase activity, and nucleotide access

Loop 1, a flexible surface loop in the myosin motor domain, comprises in part the transducer region that lies near the nucleotide-binding site and is proposed from structural studies to be responsible for the kinetic tuning of product release following ATP hydrolysis (1). Biochemical studies have shown that loop 1 affects the affinity of actin-myosin-II for ADP, motility and the V(max) of the actin-activated Mg2+-ATPase activity, possibly through P(i) release (2-8). To test the influence of loop 1 on the mammalian class I myosin, Myo1b, chimeric molecules in which (i) loop 1 of a truncated form of Myo1b, Myo1b1IQ, was replaced with either loop 1 from other myosins; (ii) loop 1 was replaced with glycine; or (iii) some amino acids in the loop were substituted with alanine and were expressed in baculovirus, and their interactions with actin and nucleotide were evaluated. The steady-state actin-activated ATPase activity; rate of ATP-induced dissociation of actin from Myo1b1IQ; rate of ADP release from actin-Myo1b1IQ; and the affinity of actin for Myo1b1IQ and Myo1b1IQ.ADP differed in the chimeras versus wild type, indicating that loop 1 has a much wider range of effects on the coupling between actin and nucleotide binding events than previously thought. In particular, the biphasic ATP-induced dissociation of actin from actin-Myo1b1IQ was significantly altered in the chimeras. This provided evidence that loop 1 contributes to the accessibility of the nucleotide pocket and is involved in the integration of information from the actin-, nucleotide-, gamma-P(i)-, and calmodulin-binding sites and predicts that loop 1 modulates the load dependence of the motor.

A model of stereocilia adaptation based on single molecule mechanical studies of myosin I

We have used an optical tweezers-based apparatus to perform single molecule mechanical experiments using the unconventional myosins, Myo1b and Myo1c. The single-headed nature and slow ATPase kinetics of these myosins make them ideal for detailed studies of the molecular mechanism of force generation by acto-myosin. Myo1c exhibits several features that have not been seen using fast skeletal muscle myosin II. (i) The working stroke occurs in two, distinct phases, producing an initial 3 nm and then a further 1.5 nm of movement. (ii) Two types of binding interaction were observed: short-lived ATP-independent binding events that produced no movement and longer-lived, ATP-dependent events that produced a full working stroke. The stiffness of both types of interaction was similar. (iii) In a new type of experiment, using feedback to apply controlled displacements to a single acto-myosin cross-bridge, we found abrupt changes in force during attachment of the acto-Myo1b cross-bridge, a result that is consistent with the classical 'T2' behaviour of single muscle fibres. Given that these myosins might exhibit the classical T2 behaviour, we propose a new model to explain the slow phase of sensory adaptation of the hair cells of the inner ear.

Mammalian class I myosin, Myo1b, is monomeric and cross-links actin filaments as determined by hydrodynamic studies and electron microscopy

The class I myosin, Myo1b, is a calmodulin- and actin-associated molecular motor widely expressed in mammalian tissues. Analytical ultracentrifugation studies indicate that Myo1b purified from rat liver has a Stokes radius of 6.7 nm and a sedimentation coefficient, s(20,w), of 7.0 S with a predicted molar mass of 213 kg/mol. These results indicate that Myo1b is monomeric and consists primarily of a splice variant having five associated calmodulins. Molecular modeling based on the analytical ultracentrifugation studies are supported by electron microscopy studies that depict Myo1b as a single-headed, tadpole-shaped molecule with outer dimensions of 27.9 x 4.0 nm. Above a certain Myo1b/actin ratio, Myo1b bundles actin filaments presumably by virtue of a second actin-binding site. These studies provide new information regarding the oligomeric state and morphology of Myo1b and support a model in which Myo1b cross-links actin through a cryptic actin-binding site.

Dynamics of myo1c (myosin-ibeta ) lipid binding and dissociation

Myosin-I is the single-headed member of the myosin superfamily that associates with lipid membranes. Biochemical experiments have shown that myosin-I membrane binding is the result of electrostatic interactions between the basic tail domain and acidic phospholipids. To better understand the dynamics of myosin-I membrane association, we measured the rates of association and dissociation of a recombinant myo1c tail domain (which includes three IQ domains and bound calmodulins) to and from large unilamellar vesicles using fluorescence resonance energy transfer. The apparent second-order rate constant for lipid-tail association in the absence of calcium is fast with nearly every lipid-tail collision resulting in binding. The rate of binding is decreased in the presence of calcium. Time courses of myo1c-tail dissociation are best fit by two exponential rates: a fast component that has a rate that depends on the ratio of acidic phospholipid to myo1c-tail (phosphatidylserine (PS)/tail) and a slow component that predominates at high PS/tail ratios. The dissociation rate of the slow component is slower than the myo1c ATPase rate, suggesting that myo1c is able to stay associated with the lipid membrane during multiple catalytic cycles of the motor. Calcium significantly increases the lifetimes of the membrane-bound state, resulting in dissociation rates 0.001 s(-1).

Motoring around the Golgi

The Golgi apparatus is a dynamic organelle through which nascent secretory and transmembrane proteins are transported, post-translationally modified and finally packaged into carrier vesicles for transport along the cytoskeleton to a variety of destinations. In the past decade, studies have shown that a number of 'molecular motors' are involved in maintaining the proper structure and function of the Golgi apparatus. Here, we review just some of the many functions performed by these mechanochemical enzymes - dyneins, kinesins, myosins and dynamin - in relation to the Golgi apparatus.

Motor domain-dependent localization of myo1b (myr-1)

Myosin-I is the single-headed, membrane binding member of the myosin superfamily that plays a role in membrane dynamics and transport [1-6]. Its molecular functions and its mechanism of regulation are not known. In mammalian cells, myosin-I is excluded from specific microfilament populations, indicating that its localization is tightly regulated. Identifying the mechanism of this localization, and the specific actin populations with which myosin-I interacts, is crucial to understanding the molecular functions of this motor. eGFP chimeras of myo1b [7] were imaged in live and fixed NRK cells. Ratio-imaging microscopy shows that myo1b-eGFP concentrates within dynamic areas of the actin cytoskeleton, most notably in membrane ruffles. Myo1b-eGFP does not associate with stable actin bundles or stress fibers. Truncation mutants consisting of the motor or tail domains show a partially overlapping cytoplasmic localization with full-length myo1b, but do not concentrate in membrane ruffles. A chimera consisting of the light chain and tail domains of myo1b and the motor domain from nonmuscle myosin-IIb (nmMIIb) concentrates on actin filaments in ruffles as well as to stress fibers. In vitro motility assays show that the exclusion of myo1b from certain actin filament populations is due to the regulation of the actomyosin interaction by tropomyosin. Therefore, we conclude that tropomyosin and spatially regulated actin polymerization play important roles in regulating the function and localization of myo1b.

Recruitment of a specific amoeboid myosin I isoform to the plasma membrane in chemotactic Dictyostelium cells

The Dictyostelium class I myosins, MyoA, -B, -C, and -D, participate in plasma membrane-based cellular processes such as pseudopod extension and macropinocytosis. Given the existence of a high affinity membrane-binding site in the C-terminal tail domain of these motor proteins and their localized site of action at the cortical membrane-cytoskeleton, it was of interest to determine whether each myosin I was directly associated with the plasma membrane. The membrane association of a myosin I heavy chain kinase that regulates the activity of one of the class I myosins, MyoD was also examined. Cellular fractionation experiments revealed that the majority of the Dicyostelium MyoA, -B, -C and -D heavy chains and the kinase are cytosolic. However, a small, but significant, fraction (appr. 7. -15%) of each myosin I and the kinase was associated with the plasma membrane. The level of plasma membrane-associated MyoB, but neither that of MyoC nor MyoD, increases up to 2-fold in highly motile, streaming cells. These results indicate that Dictyostelium specifically recruits myoB to the plasma membrane during directed cell migration, consistent with its known role in pseudopod formation.

Truncation of a mammalian myosin I results in loss of Ca2+-sensitive motility

MYR-1, a mammalian class I myosin, consisting of a heavy chain and 4-6 associated calmodulins, is represented by the 130-kDa myosin I (or MI(130)) from rat liver. MI(130) translocates actin filaments in vitro in a Ca(2+)-regulated manner. A decrease in motility observed at higher Ca(2+) concentrations has been attributed to calmodulin dissociation. To investigate mammalian myosin I regulation, we have coexpressed in baculovirus calmodulin and an epitope-tagged 85-kDa fragment representing the amino-terminal catalytic "motor" domain and the first calmodulin-binding IQ domain of rat myr-1; we refer to this truncated molecule here as MI(1IQ). Association of calmodulin to MI(1IQ) is Ca(2+)-insensitive. MI(1IQ) translocates actin filaments in vitro at a rate resembling MI(130), but unlike MI(130), does not exhibit sensitivity to 0.1-100 micrometer Ca(2+). In addition to demonstrating successful expression of a functional truncated mammalian myosin I in vitro, these results indicate that: 1) Ca(2+)-induced calmodulin dissociation from MI(130) in the presence of actin is not from the first IQ domain, 2) velocity is not affected by the length of the IQ region, and 3) the Ca(2+) sensitivity of actin translocation exhibited by MI(130) involves 1 or more of the other 5 IQ domains and/or the carboxyl tail.