Development of an internally quenched fluorescent substrate for Escherichia coli leader peptidase

A Target-Based Whole Cell Screen Approach To Identify Potential Inhibitors of Mycobacterium tuberculosis Signal Peptidase

The general secretion (Sec) pathway is a conserved essential pathway in bacteria and is the primary route of protein export across the cytoplasmic membrane. During protein export, the signal peptidase LepB catalyzes the cleavage of the signal peptide and subsequent release of mature proteins into the extracellular space. We developed a target-based whole cell assay to screen for potential inhibitors of LepB, the sole signal peptidase in Mycobacterium tuberculosis, using a strain engineered to underexpress LepB (LepB-UE). We screened 72,000 compounds against both the Lep-UE and wild-type (wt) strains. We identified the phenylhydrazone (PHY) series as having higher activity against the LepB-UE strain. We conducted a limited structure-activity relationship determination around a representative PHY compound with differential activity (MICs of 3.0 μM against the LepB-UE strain and 18 μM against the wt); several analogues were less potent against the LepB overexpressing strain. A number of chemical modifications around the hydrazone moiety resulted in improved potency. Inhibition of LepB activity was observed for a number of compounds in a biochemical assay using cell membrane fraction derived from M. tuberculosis. Compounds did not increase cell permeability, dissipate membrane potential, or inhibit an unrelated mycobacterial enzyme, suggesting a specific mode of action related to the LepB secretory mechanism.

Structure and mechanism of Escherichia coli type I signal peptidase

Type I signal peptidase is the enzyme responsible for cleaving off the amino-terminal signal peptide from proteins that are secreted across the bacterial cytoplasmic membrane. It is an essential membrane bound enzyme whose serine/lysine catalytic dyad resides on the exo-cytoplasmic surface of the bacterial membrane. This review discusses the progress that has been made in the structural and mechanistic characterization of Escherichia coli type I signal peptidase (SPase I) as well as efforts to develop a novel class of antibiotics based on SPase I inhibition. This article is part of a Special Issue entitled: Protein trafficking and secretion in bacteria. Guest Editors: Anastassios Economou and Ross Dalbey.

Bacterial type I signal peptidases as antibiotic targets

Despite an alarming increase in morbidity and mortality caused by multidrug-resistant bacteria, the number of antibiotics available to efficiently combat them is dwindling. Consequently, there is a pressing need for new drugs, preferably with novel modes of action to avert the problem of cross-resistance. Several new targets have been proposed, including proteins essential in the protein secretion pathway such as the type I signal peptidase (SPase), indispensable for the release of the signal peptide during secretion of Sec- and Tat-dependent proteins. The type I SPase is considered to be an attractive target because it is essential, substantially different from the eukaryotic counterpart, and its active site is located at the outer leaflet of the cytoplasmic membrane, permitting relatively easy access to potential inhibitors. A few SPase inhibitors have already been identified, but their suitability as drugs is yet to be confirmed. An overview is given on the currently known SPase inhibitors, how they can give valuable information on the structural, biochemical and target validation aspects of the SPases, the approaches to identify them, and their future potential as drugs.

Protease sensing with nanoparticle based platforms

Nanoparticulate systems in various unique configurations are highly effective at detecting protease activity both in vivo and in vitro. In this article, we have summarised the conventional modern methods for monitoring protease activity, and critically appraised recent advances in protease-responsive nanosensors.

An easy and fast method for the evaluation of Staphylococcus epidermidis type I signal peptidase inhibitors

In the framework of the search for new antimicrobial therapies to combat resistant bacteria, the type I signal peptidase (SPase I) serves as a potentially interesting target for the development of antibacterials with a new mode of action. Bacterial SPases I play a key role in protein secretion as they are responsible for the cleavage of signal peptides from secreted proteins. For the Gram-positive Staphylococcus epidermidis, an important source of biofilm-associated infections, three putative SPases I (denoted Sip1, Sip2, Sip3) have been described, of which Sip1 lacks the catalytic lysine. Here, we report the in vitro activity of purified Sip2 and Sip3 using pre-SceD as a native preprotein substrate of S. epidermidis and in a FRET-based assay. For the latter, a novel internally quenched fluorescent peptide substrate based on the signal peptide sequence of this native preprotein was developed and specific cleavage of this synthetic fluorogenic peptide substrate was demonstrated. The latter in vitro assay represents a rapid and reliable tool in future research for the identification and validation of potential SPase I inhibitors.

Enzymatic investigation of the Staphylococcus aureus type I signal peptidase SpsB - implications for the search for novel antibiotics

Staphylococcus aureus has one essential type I signal peptidase (SPase), SpsB, which has emerged as a potential target in the search for antibiotics with a new mode of action. In this framework, the biochemical properties of SpsB are described and compared with other previously characterized SPases. Two different substrates have been used to assess the in vitro processing activity of SpsB: (a) a native preprotein substrate immunodominant staphylococcal antigen A and (b) an intramolecularly quenched fluorogenic synthetic peptide based on the sequence of the SceD preprotein of Staphylococcus epidermidis for fluorescence resonance energy transfer-based analysis. Activity testing at different pH showed that the enzyme has an optimum pH of approximately 8. The pH-rate profile revealed apparent pK(a) values of 6.6 and 8.7. Similar to the other SPases, SpsB undergoes self-cleavage and, although the catalytic serine is retained in the self-cleavage product, a very low residual enzymatic activity remained. In contrast, a truncated derivative of SpsB, which was nine amino acids longer at the N-terminus compared to the self-cleavage product, retained activity. The specificity constants (k(cat)/K(m)) of the full-length and the truncated derivative were 1.85 +/- 0.13 x 10(3) m(-1).s(-1) and 59.4 +/- 6.4 m(-1).s(-1), respectively, as determined using the fluorogenic synthetic peptide substrate. These observations highlight the importance of the amino acids in the transmembrane segment and also those preceding the catalytic serine in the sequence of SpsB. Interestingly, we also found that the activity of the truncated SpsB increased in the presence of a non-ionic detergent.

Substrate based peptide aldehyde inhibits bacterial type I signal peptidase

Bacterial type I signal peptidase is a potential target for the development of novel antibacterial agents. In this study we demonstrate that a substrate based peptide aldehyde inhibits signal peptidases with a lower IC(50) value than the lipopeptides described to date. The length of the core lipopeptide could be reduced by removing several amino acids from both termini. Conversion of this peptide to an aldehyde resulted in a molecule with an IC(50) value of 0.09microM when tested against Staphylococcus [corrected] aureus SPase I, SpsB.

Plasmodium falciparum signal peptidase is regulated by phosphorylation and required for intra-erythrocytic growth

The human malaria parasite Plasmodium falciparum exports a variety of its proteins through its endoplasmic reticulum (ER) based secretory pathway in order to survive in the host erythrocyte. Signal peptidases are membrane-bound endopeptidases and have an important role in the transport and maturation of these parasite proteins. Prokaryotic signal peptidases are indispensable enzymes required for the removal of N-terminal signal peptide from the secretory proteins. Eukaryotic signal peptidases exist as multimeric protein complex in the ER and the catalytic subunit of this complex catalyzes removal of the N-terminal signal peptide from preproteins. All the signal peptidases contain five regions of high-sequence similarity referred to as boxes A-E. Here we report characterization of the catalytic subunit of signal peptidase complex (SPC) from P. falciparum. This protein designated as PfSP21 shows homology with the similar subunit from other sources and contains all the conserved boxes A-E. PfSP21 is able to cleave the peptide substrate containing the signal peptidase cleavage site. PfSP21 is phosphorylated by protein kinase C and its enzyme activity was upregulated after this phosphorylation. Immunofluorescence assay studies revealed that PfSP21 is localized in the ER of P. falciparum. PfSP21 dsRNA specifically inhibits the growth of P. falciparum in culture and this inhibition is most likely due to the decrease in the amount of endogenous PfSP21 protein. These studies demonstrate the characterization of a functional subunit of SPC from P. falciparum and should make an important contribution in our better understanding of the complex process of protein translocation in the parasite.

A role for type I signal peptidase in Staphylococcus aureus quorum sensing

The Staphylococcus aureus Agr quorum-sensing system modulates the expression of extracellular virulence factors. The Agr system is controlled by an autoinducing peptide (AIP) molecule that is secreted during growth. In the AIP biosynthetic pathway, two proteolytic events are required to remove the leader and tail segments of AgrD, the peptide precursor of AIP. The only protein known to be involved in this pathway is AgrB, a membrane endopeptidase that removes the AgrD carboxy-tail. We designed a synthetic peptide substrate and developed an assay to detect peptidases that can remove the N-terminal leader of AIP. Several peptidase activities were detected in S. aureus extracts and these activities were present in both wild-type and agr mutant strains. Only one of these peptidases cleaved in the correct position and all properties of this enzyme were consistent with type I signal peptidase. Subsequent cloning and purification of the two known S. aureus signal peptidases, SpsA and SpsB, demonstrated that only SpsB catalysed this activity in vitro. To investigate the role of SpsB in AIP biosynthesis, SpsB peptide inhibitors were designed and characterized. The most effective inhibitor blocked SpsB activity in vitro and showed antibacterial activity against S. aureus. Importantly, the inhibitor reduced expression of an Agr-dependent reporter and inhibited AIP production in S. aureus, indicating a role for SpsB in quorum sensing.

Nitric oxide inducing function and intracellular movement of chicken interleukin-18 in cultured cells

To evaluate the characteristics of chicken interleukin-18 (ChIL-18) in different forms in vitro, the ChIL-18 full-length gene (ChIL-18-F) and the ChIL-18 presumed mature protein gene (ChIL-18-M) were cloned and inserted into the eukaryotic expression vector pCI, to construct recombinant pCI-ChIL-18-F and pCI-ChIL-18-M. The recombinant plasmids were then transferred into chicken splenic lymphocytes (CSLs). Western blot showed that ChIL-18-F, with a molecular weight of 23.0 kDa, was produced in CSLs transfected by pCI-ChIL-18-F; ChIL-18-M, with a molecular weight of 19.5 kDa, was produced in CSLs transfected by pCI-ChIL-18-M. The nitric oxide (NO) level in the transfected CSLs and the culture medium at different time points was further examined under confocal microscopy using 4,5-diaminofluorescein staining. The results showed that both pCI-ChIL-18-F and pCI-ChIL-18-M groups showed significant increase in intracellular and extracellular NO production compared with pCI transfected control cells. These results suggest that both ChIL-18-F and ChIL-18-M could stimulate NO secretion in CSLs. To characterize the intracellular distribution of ChIL-18, ChIL-18-F and ChIL-18-M were each fused to the enhanced green fluorescent protein gene, and expressed in Vero cells. The results showed that the ChIL-18-F tended to the membranous region in Vero cells, while ChIL-18-M did not. This indicates that the N-terminal 27 amino acid peptide helped ChIL-18 target to Vero cell membranes.

Type I signal peptidases of Gram-positive bacteria

Proteins that are exported from the cytoplasm to the periplasm and outer membrane of Gram-negative bacteria, or the cell wall and growth medium of Gram-positive bacteria, are generally synthesized as precursors with a cleavable signal peptide. During or shortly after pre-protein translocation across the cytoplasmic membrane, the signal peptide is removed by signal peptidases. Importantly, pre-protein processing by signal peptidases is essential for bacterial growth and viability. This review is focused on the signal peptidases of Gram-positive bacteria, Bacillus and Streptomyces species in particular. Evolutionary concepts, current knowledge of the catalytic mechanism, substrate specificity requirements and structural aspects are addressed. As major insights in signal peptidase function and structure have been obtained from studies on the signal peptidase LepB of Escherichia coli, similarities and differences between this enzyme and known Gram-positive signal peptidases are highlighted. Notably, while the incentive for previous research on Gram-positive signal peptidases was largely based on their role in the biotechnologically important process of protein secretion, present-day interest in these essential enzymes is primarily derived from the idea that they may serve as targets for novel anti-microbials.

A perspective on enzyme catalysis

The seminal hypotheses proposed over the years for enzymatic catalysis are scrutinized. The historical record is explored from both biochemical and theoretical perspectives. Particular attention is given to the impact of molecular motions within the protein on the enzyme's catalytic properties. A case study for the enzyme dihydrofolate reductase provides evidence for coupled networks of predominantly conserved residues that influence the protein structure and motion. Such coupled networks have important implications for the origin and evolution of enzymes, as well as for protein engineering.

Lipopeptide substrates for SpsB, the Staphylococcus aureus type I signal peptidase: design, conformation and conversion to alpha-ketoamide inhibitors

Pre-protein sequence data was used to design substrates for SpsB, the bacterial signal peptidase I enzyme from Staphylococcus aureus. Key elements were an alkyl membrane anchor, proline at P5 and lysine at P2. The proline at P5 induced a helical turn in the lipopeptide, as deduced from NMR studies, from P6 to P2 in membrane mimetic solvents. The substrate Decanoyl-LTPTAKAASKIDD-OH was cleaved by SpsB, as expected, between the P1 and P1' alanines with a k(cat)/K(m) of 2.3x10(6) M(-1)s(-1) at pH 8.5. Insertion of proline at P1' converted substrates to competitive inhibitors, whilst the incorporation of an alpha-ketoamide at the cleavage site transformed substrates to time dependent inhibitors of SpsB.

Fluorigenic substrates for the protease activities of botulinum neurotoxins, serotypes A, B, and F

The seven botulinum neurotoxins (BoNTs) are zinc metalloproteases that cleave neuronal proteins involved in neurotransmitter release and are among the most toxic natural products known. High-throughput BoNT assays are needed for use in antibotulinum drug discovery and to characterize BoNT protease activities. Compared to other proteases, BoNTs exhibit unusually stringent substrate requirements with respect to amino acid sequences and polypeptide lengths. Nonetheless, we have devised a strategy for development of fluorigenic BoNT protease assays, based on earlier structure-function studies, that has proven successful for three of the seven serotypes: A, B, and F. In synthetic peptide substrates, the P(1) and P(3)' residues were substituted with 2,4-dinitrophenyl-lysine and S-(N-[4-methyl-7-dimethylamino-coumarin-3-yl]-carboxamidomethyl)-cysteine, respectively. By monitoring the BoNT-catalyzed increase in fluorescence over time, initial hydrolysis rates could be obtained in 1 to 2 min when BoNT concentrations were 60 ng/ml (about 1 nM) or higher. Each BoNT cleaved its fluorigenic substrate at the same location as in the neuronal target protein, and kinetic constants indicated that the substrates were selective and efficient. The fluorigenic assay for BoNT B was used to characterize a new competitive inhibitor of BoNT B protease activity with a K(i) value of 4 micro M. In addition to real-time activity measurements, toxin concentration determinations, and kinetic studies, the BoNT substrates described herein may be directly incorporated into automated high-throughput assay systems to screen large numbers of compounds for potential antibotulinum drugs.

Regulated expression of the Escherichia coli lepB gene as a tool for cellular testing of antimicrobial compounds that inhibit signal peptidase I in vitro

Escherichia coli under-expressing lepB was utilized to test cellular inhibition of signal peptidase I (SPase). For the construction of a lepB regulatable strain, the E. coli lepB gene was cloned into pBAD, with expression dependent on L-arabinose. The chromosomal copy of lepB was replaced with a kanamycin resistance gene, which was subsequently removed. SPase production by the lepB regulatable strain in the presence of various concentrations of L-arabinose was monitored by Western blot analysis. At lower arabinose concentrations growth proceeded more slowly, possibly due to a decrease of SPase levels in the cells. A penem SPase inhibitor with little antimicrobial activity against E. coli when tested at 100 micro M was utilized to validate the cell-based system. Under-expression of lepB sensitized the cells to penem, with complete growth inhibition observed at 10 to 30 micro M. Growth was rescued by increasing the SPase levels. The cell-based assay was used to test cellular inhibition of SPase by compounds that inhibit the enzyme in vitro. MD1, MD2, and MD3 are SPase inhibitors with antimicrobial activity against Staphylococcus aureus, although they do not inhibit growth of E. coli. MD1 presented the best spectrum of antimicrobial activity. Both MD1 and MD2 prevented growth of E. coli under-expressing lepB in the presence of polymyxin B nonapeptide, with growth rescue observed when wild-type levels of SPase were produced. MD3 and MD4, a reactive analog of MD3, inhibited growth of E. coli under-expressing lepB. However, growth rescue in the presence of these compounds following increased lepB expression was observed only after prolonged incubation.

Physical requirements for in vitro processing of the Streptomyces lividans signal peptidases

The Gram-positive eubacterium Streptomyces lividans contains four chromosomally encoded type I signal peptidases, SipW, SipX, SipY and SipZ, of which all but SipW have an unusual C-terminal membrane anchor. For in vitro characterisation of these signal peptidases, the S. lividans sip genes were expressed in Escherichia coli and the corresponding proteins were purified. The four enzymes had an optimum activity at an alkaline pH, notably pH 8-9 for SipW and SipY and pH 10-11 for SipX and SipZ. In contrast to SipW, the in vitro activities of SipX, SipY and SipZ significantly increased in the presence of detergent. Since none of the S. lividans Sip proteins contains the hydrophobic beta-barrel domain, which in E. coli LepB was proven to be requisite for detergent-dependent in vitro activity, we assume that for detergent dependence, the C-terminal transmembrane anchor can partly substitute for this domain. Finally, all Sip proteins were stimulated by added phospholipids, which strongly suggests that phospholipids play an important role in the catalytic mechanism.

Kinetic constants of signal peptidase I using cytochrome b5 as a precursor substrate

A procedure is described for measuring Escherichia coli signal peptidase I activity which exploits an intact precursor protein composed of the alkaline phosphatase signal peptide fused to the full length mammalian cytochrome b5. This cytochrome b5 precursor protein has been extensively characterised and shown to be processed accurately by purified signal peptidase I [Protein Expr. Purif. 7 (1996) 237]. The amphipathic, chimaeric cytochrome b5 precursor was isolated in mg quantities in a highly homogeneous state under non-denaturing conditions. The processing of the cytochrome b5 precursor by signal peptidase displayed Michaelis-Menten kinetics with K(m)=50 microM and k(cat)=11 s(-1). The K(m) was 20-fold lower than that obtained with signal peptide substrates and 3-fold higher than that reported for pro-OmpA-nuclease A precursor fusion. The corresponding turnover number, k(cat), was four orders of magnitude greater than the peptide substrates but was 2-fold lower than pro-OmpA-nuclease A precursor fusion. These results confirm that both the affinities and the catalytic power of the signal peptidase are significantly higher for macromolecular precursor substrates than for the shorter signal peptide substrates.

Membrane topology of the Streptomyces lividans type I signal peptidases

Most bacterial membranes contain one or two type I signal peptidases (SPases) for the removal of signal peptides from export proteins. For Streptomyces lividans, four different type I SPases (denoted SipW, SipX, SipY, and SipZ) were previously described. In this communication, we report the experimental determination of the membrane topology of these SPases. A protease protection assay of SPase tendamistat fusions confirmed the presence of the N- as well as the C-terminal transmembrane anchor for SipY. SipX and SipZ have a predicted topology similar to that of SipY. These three S. lividans SPases are currently the only known prokaryotic-type type I SPases of gram-positive bacteria with a C-terminal transmembrane anchor, thereby establishing a new subclass of type I SPases. In contrast, S. lividans SipW contains only the N-terminal transmembrane segment, similar to most type I SPases of gram-positive bacteria. Functional analysis showed that the C-terminal transmembrane anchor of SipY is important to enhance the processing activity, both in vitro as well as in vivo. Moreover, for the S. lividans SPases, a relation seems to exist between the presence or absence of the C-terminal anchor and the relative contributions to the total SPase processing activity in the cell. SipY and SipZ, two SPases with a C-terminal anchor, were shown to be of major importance to the cell. Accordingly, for SipW, missing the C-terminal anchor, a minor role in preprotein processing was found.

Development of an Internally Quenched Fluorescent Substrate and a Continuous Fluorimetric Assay for Streptococcus pneumoniae Signal Peptidase I

Signal peptidase (SPase) I is responsible for the cleavage of signal peptides of many secreted proteins in bacteria and serves as a potential target for the development of novel antibacterial agents due to its unique physiological and biochemical properties. In this paper, we describe a novel fluorogenic substrate, KLTFGTVK(Abz)PVQAIAGY(NO2)EWL, in which 2-aminobenzoic acid (Abz) and 3-nitrotyrosine (Y(NO2)) were used as the fluorescent donor and acceptor, respectively. The substrate can be cleaved by both Streptococcus pneumoniae and Escherichia coli SPase I. Upon cleavage of the fluorogenic substrate by SPase I, the fluorescent intensity increases and can be monitored continuously by spectrofluorometer. Kinetic analysis with S. pneumoniae SPase I demonstrated that the K(m) value for the substrate is 118.1 microM, and the k(cat) value is 0.032 s(-1). Mass spectrometric analysis and peptide sequencing of the two cleaved products confirmed that the cleavage occurs specifically at the predicted site. More interestingly, the positively charged lysine in the N-terminus of the substrate was demonstrated to be important for effective cleavage. Phospholipids were found to stimulate the cleavage reaction. This stimulation by phospholipids is dependent upon the N-terminal charge of the substrate, indicating that the interaction of the positively charged substrate with anionic phospholipids is important for maintaining the substrate in certain conformation for cleavage. The substrate and assay described here can be readily automated and utilized for the identification of potential antibacterial agents.

Adenosine triphosphate-dependent degradation of a fluorescent lambda N substrate mimic by Lon protease

Escherichia coli Lon exhibits a varying degree of energy requirement toward hydrolysis of different substrates. Efficient degradation of protein substrates requires the binding and hydrolysis of ATP such that the intrinsic ATPase of Lon is enhanced during protein degradation. Degradation of synthetic tetrapeptides, by contrast, is achieved solely by ATP binding with concomitant inhibition of the ATPase activity. In this study, a synthetic peptide (FRETN 89-98), containing residues 89-98 of lambda N protein and a fluorescence donor (anthranilamide) and quencher (3-nitrotyrosine), has been examined for ATP-dependent degradation by E. coli and human Lon proteases. The cleavage profile of FRETN 89-98 by E. coli Lon resembles that of lambda N degradation. Both the peptide and protein substrates are specifically cleaved between Cys93 and Ser94 with concomitant stimulation of Lon's ATPase activity. Furthermore, the degradation of FRETN 89-98 is supported by ATP and AMPPNP but not ATPgammaS nor AMPPCP. FRETN 89-98 hydrolysis is eight times more efficient in the presence of 0.5 mM ATP compared to 0.5 mM AMPPNP at 86 microM peptide. The ATP-dependent hydrolysis of FRETN 89-98 displays sigmodial kinetics. The k(cat), [S](0.5), and the Hill coefficient of FRETN 89-98 degradation are 3.2 +/- 0.3 s(-1), 106 +/- 21 microM, and 1.6 respectively.

Biochemical characterization of signal peptidase I from gram-positive Streptococcus pneumoniae

Bacterial signal peptidase I is responsible for proteolytic processing of the precursors of secreted proteins. The enzymes from gram-negative and -positive bacteria are different in structure and specificity. In this study, we have cloned, expressed, and purified the signal peptidase I of gram-positive Streptococcus pneumoniae. The precursor of streptokinase, an extracellular protein produced in pathogenic streptococci, was identified as a substrate of S. pneumoniae signal peptidase I. Phospholipids were found to stimulate the enzymatic activity. Mutagenetic analysis demonstrated that residues serine 38 and lysine 76 of S. pneumoniae signal peptidase I are critical for enzyme activity and involved in the active site to form a serine-lysine catalytic dyad, which is similar to LexA-like proteases and Escherichia coli signal peptidase I. Similar to LexA-like proteases, S. pneumoniae signal peptidase I catalyzes an intermolecular self-cleavage in vitro, and an internal cleavage site has been identified between glycine 36 and histidine 37. Sequence analysis revealed that the signal peptidase I and LexA-like proteases show sequence homology around the active sites and some common properties around the self-cleavage sites. All these data suggest that signal peptidase I and LexA-like proteases are closely related and belong to a novel class of serine proteases.

The role of the membrane-spanning domain of type I signal peptidases in substrate cleavage site selection

Type I signal peptidase (SPase I) catalyzes the cleavage of the amino-terminal signal sequences from preproteins destined for cell export. Preproteins contain a signal sequence with a positively charged n-region, a hydrophobic h-region, and a neutral but polar c-region. Despite having no distinct consensus sequence other than a commonly found c-region "Ala-X-Ala" motif preceding the cleavage site, signal sequences are recognized by SPase I with high fidelity. Remarkably, other potential Ala-X-Ala sites are not cleaved within the preprotein. One hypothesis is that the source of this fidelity is due to the anchoring of both the SPase I enzyme (by way of its transmembrane segment) and the preprotein substrate (by the h-region in the signal sequence) in the membrane. This limits the enzyme-substrate interactions such that cleavage occurs at only one site. In this work we have, for the first time, successfully isolated Bacillus subtilis type I signal peptidase (SipS) and a truncated version lacking the transmembrane domain (SipS-P2). With purified full-length as well as truncated constructs of both B. subtilis and Escherichia coli (Lep) SPase I, in vitro specificity studies indicate that the transmembrane domains of either enzyme are not important determinants of in vitro cleavage fidelity, since enzyme constructs lacking them reveal no alternate site processing of pro-OmpA nuclease A substrate. In addition, experiments with mutant pro-OmpA nuclease A substrate constructs indicate that the h-region of the signal peptide is also not critical for substrate specificity. In contrast, certain mutants in the c-region of the signal peptide result in alternate site cleavage by both Lep and SipS enzymes.

Rapid identification of substrates for novel proteases using a combinatorial peptide library

Fluorogenic substrates for assaying novel proteolytic enzymes could be rapidly identified using an easy, solid-phase combinatorial assay technology. The methodology was validated with leader peptidase of Escherichia coli using a subset of an intramolecularly quenched fluorogenic peptide library. The technique was extended toward the discovery of substrates for a new aspartic protease of pharmaceutical relevance (human napsin A). We demonstrated for the first time known to us that potent fluorogenic substrates can be discovered using extracts of cells expressing recombinant enzyme to screen the peptide library. The straightforward and rapid optimization of protease substrates greatly facilitates the drug discovery process by speeding up the development of high throughput screening assays and thus helps more effective exploitation of the enormous body of information and chemical structures emerging from genomics and combinatorial chemistry technologies.

Kinetic and mechanistic studies of signal peptidase I from Escherichia coli

Signal peptidases of prokaryotic organisms reside in the outer leaflet of the cytoplasmic membrane and catalyze the hydrolytic cleavage of a specific peptide bond of membrane-imbedded preproteins to liberate mature proteins for secretion. In this manuscript, we report new and efficient peptide substrates for SPase and their use to explore features of this enzyme's reaction mechanism. The enzyme used in this study was recombinant SPase I of Escherichia coli that had been solubilized with Triton X-100 and purified to near homogeneity. Our new substrates are based on the fluorogenic peptide reported by Zhong and Benkovic [(1998) Anal. Biochem. 255, 66], Y(NO2)FSASALA approximately KIK(Abz)-NH(2) (Y(NO2), 3-nitro-L-tyrosine; K(Abz), epsilon-(2-aminobenzoyl)-L-Lys; hydrolysis at A approximately K). We found that when a signal peptide-like sequence is appended onto the N-terminus of this peptide to produce K(5)-L(10)-Y(NO2)FSASALA approximately KIK(Abz)-NH(2), k(c)/K(m) increases from 85 to 2.5 x 10(6) M(-)(1) s(-)(1). k(c)/K(m) decreases with increasing concentration of Triton X-100 micelles under the condition [Triton X-100](micelle) > [S](0) > [E](0). We explain this apparent inhibition with a model of surface dilution kinetics in which "empty" micelles compete with substrate-containing micelles for micelle-bound enzyme. Fusion of micelle-bound enzyme with a substrate-containing micelle leads to formation of productive E:S substrate complexes while fusion of micelle-bound enzyme with an "empty" micelle is nonproductive and inhibitory. The dependence of steady-state kinetic parameters for the SPase-catalyzed hydrolysis of K(5)-L(10)-Y(NO2)FSASALA approximately KIK(Abz)-NH(2) on [Triton X-100](micelle) supports this model. Product inhibition and solvent isotope effects were also investigated and could be interpreted in the context of this model.

The structure and mechanism of bacterial type I signal peptidases. A novel antibiotic target

Type I signal peptidases are essential membrane-bound serine proteases that function to cleave the amino-terminal signal peptide extension from proteins that are translocated across biological membranes. The bacterial signal peptidases are unique serine proteases that utilize a Ser/Lys catalytic dyad mechanism in place of the classical Ser/His/Asp catalytic triad mechanism. They represent a potential novel antibiotic target at the bacterial membrane surface. This review will discuss the bacterial signal peptidases that have been characterized to date, as well as putative signal peptidase sequences that have been recognized via bacterial genome sequencing. We review the investigations into the mechanism of Escherichia coli and Bacillus subtilis signal peptidase, and discuss the results in light of the recent crystal structure of the E. coli signal peptidase in complex with a beta-lactam-type inhibitor. The proposed conserved structural features of Type I signal peptidases give additional insight into the mechanism of this unique enzyme.

New fluorogenic substrates for N-arginine dibasic convertase

N-Arginine dibasic (NRD) convertase is a recently described peptidase capable of selectively cleaving peptides between paired basic residues. The characterization of this unique peptidase has been hindered by the fact that no facile assay procedure has been available. Here we report the development of a rapid and sensitive assay for NRD convertase, based on the utilization of two new internally quenched fluorogenic peptides: Abz-GGFLRRVGQ-EDDnp and Abz-GGFLRRIQ-EDDnp. These peptides contain the fluorescent 2-aminobenzoyl moiety that is quenched in the intact peptide by a 2, 4-dinitrophenyl moiety. Cleavage by NRD convertase at the Arg-Arg sequence results in an increase of fluorescence. NRD convertase cleaves these peptides efficiently and with high specificity as observed by both HPLC and fluorescence spectroscopy. The rate of hydrolysis of the fluorogenic substrates is proportional to enzyme concentration, and obeys Michaelis-Menten kinetics. The kinetic parameters for the fluorescent peptides (Km values of approximately 1.0 microM, and Vmax values of approximately 1 microM/(min. mg) are similar to those obtained with peptide hormones as substrates.