A high-throughput screen for identifying transmembrane pore-forming peptides

Improved Broad Spectrum Antifungal Drug Synergies with Cryptomycin, a Cdc50-Inspired Antifungal Peptide

Fungal infections in humans are difficult to treat, with very limited drug options. Due to a confluence of factors, there is an urgent need for innovation in the antifungal drug space, particularly to combat increasing antifungal drug resistance. Our previous studies showed that Cdc50, a subunit of fungal lipid translocase (flippase), is essential for Cryptococcus neoformans virulence and required for antifungal drug resistance, suggesting that fungal lipid flippase could be a novel drug target. Here, we characterized an antifungal peptide, Cryptomycinamide (KKOO-NH2), derived from a 9-amino acid segment of the C. neoformans Cdc50 protein. A fungal killing assay indicated that KKOO-NH2 is fungicidal against C. neoformans. The peptide has antifungal activity against multiple major fungal pathogens with a minimum inhibitory concentration (MIC) of 8 μg/mL against C. neoformans and Candida glabrata, 16 μg/mL against Candida albicans and C. auris, and 32 μg/mL against Aspergillus fumigatus. The peptide has low cytotoxicity against host cells based on our hemolysis assays and vesicle leakage assays. Strikingly, the peptide exhibits strong drug synergy with multiple antifungal drugs, including amphotericin B, itraconazole, and caspofungin, depending on the specific species on which the combinations were assayed. The fluorescently labeled peptide was detected to localize to the plasma membrane, likely inhibiting key interactions of Cdc50 with membrane proteins such as P4 ATPases. Cryptococcus cells exposed to sub-MIC of peptide showed increased reactive oxygen species production and intracellular calcium levels, indicating a peptide-induced stress response. Decreased intracellular proliferation within macrophages was observed after 30 min of peptide exposure and 24 h coincubation with macrophages, providing a potential translational mechanism to explore further in vivo. In aggregate, the synergistic activity of our KKOO-NH2 peptide may offer a potential novel candidate for combination therapy with existing antifungal drugs.

Substituting azobenzene for proline in melittin to create photomelittin: A light-controlled membrane active peptide

In this article we present the synthesis and characterization of a new form of the membrane active peptide melittin: photomelittin. This peptide was created by substituting the proline residue in melittin for a synthetic azobenzene amino acid derivative. This azobenzene altered the membrane activity of the peptide while retaining much of the secondary structure. Furthermore, the peptide demonstrates added light-dependent activity in leakage assays. There is a 1.5-fold increase in activity when exposed to UV light as opposed to visible light. The peptides further exhibit light-dependent hemolytic activity against human red blood cells. This will enable future studies optimizing photomelittin and other azobenzene-containing membrane active peptides for uses in medicine, drug delivery, and other biotechnological applications.

Contributions and Limitations of Biophysical Approaches to Study of the Interactions between Amphiphilic Molecules and the Plant Plasma Membrane

Some amphiphilic molecules are able to interact with the lipid matrix of plant plasma membranes and trigger the immune response in plants. This original mode of perception is not yet fully understood and biophysical approaches could help to obtain molecular insights. In this review, we focus on such membrane-interacting molecules, and present biophysically grounded methods that are used and are particularly interesting in the investigation of this mode of perception. Rather than going into overly technical details, the aim of this review was to provide to readers with a plant biochemistry background a good overview of how biophysics can help to study molecular interactions between bioactive amphiphilic molecules and plant lipid membranes. In particular, we present the biomimetic membrane models typically used, solid-state nuclear magnetic resonance, molecular modeling, and fluorescence approaches, because they are especially suitable for this field of research. For each technique, we provide a brief description, a few case studies, and the inherent limitations, so non-specialists can gain a good grasp on how they could extend their toolbox and/or could apply new techniques to study amphiphilic bioactive compound and lipid interactions.

Mechanistic Landscape of Membrane-Permeabilizing Peptides

Membrane permeabilizing peptides (MPPs) are as ubiquitous as the lipid bilayer membranes they act upon. Produced by all forms of life, most membrane permeabilizing peptides are used offensively or defensively against the membranes of other organisms. Just as nature has found many uses for them, translational scientists have worked for decades to design or optimize membrane permeabilizing peptides for applications in the laboratory and in the clinic ranging from antibacterial and antiviral therapy and prophylaxis to anticancer therapeutics and drug delivery. Here, we review the field of membrane permeabilizing peptides. We discuss the diversity of their sources and structures, the systems and methods used to measure their activities, and the behaviors that are observed. We discuss the fact that "mechanism" is not a discrete or a static entity for an MPP but rather the result of a heterogeneous and dynamic ensemble of structural states that vary in response to many different experimental conditions. This has led to an almost complete lack of discrete three-dimensional active structures among the thousands of known MPPs and a lack of useful or predictive sequence-structure-function relationship rules. Ultimately, we discuss how it may be more useful to think of membrane permeabilizing peptides mechanisms as broad regions of a mechanistic landscape rather than discrete molecular processes.

Responsive Polydiacetylene Vesicles for Biosensing Microorganisms

Polydiacetylene (PDA) inserted in films or in vesicles has received increasing attention due to its property to undergo a blue-to-red colorimetric transition along with a change from non-fluorescent to fluorescent upon application of various stimuli. In this review paper, the principle for the detection of various microorganisms (bacteria, directly detected or detected through the emitted toxins or through their DNA, and viruses) and of antibacterial and antiviral peptides based on these responsive PDA vesicles are detailed. The analytical performances obtained, when vesicles are in suspension or immobilized, are given and compared to those of the responsive vesicles mainly based on the vesicle encapsulation method. Many future challenges are then discussed.

Determining the Effects of Membrane-Interacting Peptides on Membrane Integrity

In the study of cell-penetrating and membrane-translocating peptides, a fundamental question occurs as to the contribution arising from fundamental peptide-membrane interactions, relative to the contribution arising from the biology and energy of the cell, mostly occurring in the form of endocytosis and subsequent events. A commonly used approach to begin addressing these mechanistic questions is to measure the degree to which peptides can interact with, and physically disrupt, the integrity of synthetic lipid bilayers. Here, we describe a set of experimental methods that can be used to measure the potency, kinetics, transience, and the effective size of peptide-induced membrane disruption.

Examination of bacterial inhibition using a catalytic DNA

Determination of accurate dosage of existing antibiotics and discovery of new antimicrobials or probiotics entail simple but effective methods that can conveniently track bacteria growth and inhibition. Here we explore the application of a previously reported fluorogenic E. coli-specific DNAzyme (catalytic DNA), RFD-EC1, as a molecular probe for monitoring bacterial inhibition exerted by antibiotics and for studying bacterial competition as a result of cohabitation. Because the DNAzyme method provides a convenient way to monitor the growth of E. coli, it is capable of determining the minimal inhibitory concentration (MIC) of antibiotics much faster than the conventional optical density (OD) method. In addition, since the target for RFD-EC1 is an extracellular protein molecule from E. coli, RFD-EC1 is able to identify pore-forming antibiotics or compounds that can cause membrane leakage. Finally, RFD-EC1 can be used to analyse the competition of cohabitating bacteria, specifically the inhibition of growth of E. coli by Bacillus subtilis. The current work represents the first exploration of a catalytic DNA for microbiological applications and showcases the utility of bacteria-sensing fluorogenic DNAzymes as simple molecular probes to facilitate antibiotic and probiotic research.

Spectroscopic and permeation studies of phospholipid bilayers supported by a soft hydrogel scaffold

Polarized attenuated total reflection infrared (ATR-IR) spectroscopy, fluorescence microscopy, and fluorescence spectroscopy were used to characterize a lipid coating composed of 70 mol % 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 30 mol % cholesterol, supported on a spherical hydrogel scaffold. The fluorescence microscopy images show an association between the lipid coating and the hydrogel scaffold. Fluorescence permeability measurements revealed that the phospholipid coating acts as a permeability barrier, exhibiting characteristics of a lamellar bilayer coating structure. Variable evanescent wave penetration depth ATR-IR spectroscopy studies validated the determination of quantitative molecular orientation information for a lipid coating supported on a spherical scaffold. These polarized ATR-IR studies measured an average DMPC acyl chain tilt angle of ∼21-25°, with respect to the surface normal.

Determining the mechanism of membrane permeabilizing peptides: identification of potent, equilibrium pore-formers

To enable selection and characterization of highly potent pore-forming peptides, we developed a set of novel assays to probe 1) the potency of peptide pores at very low peptide concentration; 2) the presence or absence of pores in membranes after equilibration; 3) the interbilayer exchangeability of pore-forming peptides; and 4) the degree to which pore-forming peptides disrupt the bilayer organization at equilibrium. Here, we use these assays to characterize, in parallel, six membrane-permeabilizing peptides belonging to multiple classes. We tested the antimicrobial peptides LL37 and dermaseptin S1, the well-known natural lytic peptides melittin and alamethicin, and the very potent lentivirus lytic peptides LLP1 and LLP2 from the cytoplasmic domain of HIV GP41. The assays verified that that the antimicrobial peptides are not potent pore formers, and form only transient permeabilization pathways in bilayers which are not detectable at equilibrium. The other peptides are far more potent and form pores that are still detectable in vesicles after many hours. Among the peptides studies, alamethicin is unique in that it is very potent, readily exchanges between vesicles, and disturbs the local bilayer structure even at very low concentration. The equally potent LLP peptides do not exchange readily and do not perturb the bilayer at equilibrium. Comparison of these classes of pore forming peptides in parallel using the set of assays we developed demonstrates our ability to detect differences in their mechanism of action. Importantly, these assays will be very useful in high-throughput screening where highly potent pore-forming peptides can be selected based on their mechanism of action.

Liposomal leakage induced by virus-derived peptides, viral proteins, and entire virions: rapid analysis by chip electrophoresis

Permeabilization of model lipid membranes by virus-derived peptides, viral proteins, and entire virions of human rhinovirus was assessed by quantifying the release of a fluorescent dye from liposomes via a novel chip electrophoretic assay. Liposomal leakage readily occurred upon incubation with the pH-sensitive synthetic fusogenic peptide GALA and, less efficiently, with a 24mer peptide (P1-N) derived from the N-terminus of the capsid protein VP1 of human rhinovirus 2 (HRV2) at acidic pH. Negative stain transmission electron microscopy showed that liposomes incubated with the rhinovirus-derived peptide remained largely intact. At similar concentrations, the GALA peptide caused gross morphological changes of the liposomes. On a molar basis, the leakage-inducing efficiency of the P1 peptide was by about 2 orders of magnitude inferior to that of recombinant VP1 (from HRV89) and entire HRV2. This underscores the role in membrane destabilization of VP1 domains remote from the N-terminus and the arrangement of the peptide in the context of the icosahedral virion. Our method is rapid, requires tiny amounts of sample, and allows for the parallel determination of released and retained liposomal cargo.

Amyloidogenic protein-membrane interactions: mechanistic insight from model systems

The toxicity of amyloid-forming proteins is correlated with their interactions with cell membranes. Binding events between amyloidogenic proteins and membranes result in mutually disruptive structural perturbations, which are associated with toxicity. Membrane surfaces promote the conversion of amyloid-forming proteins into toxic aggregates, and amyloidogenic proteins, in turn, compromise the structural integrity of the cell membrane. Recent studies with artificial model membranes have highlighted the striking resemblance of the mechanisms of membrane permeabilization of amyloid-forming proteins to those of pore-forming toxins and antimicrobial peptides.

High-throughput discovery of broad-spectrum peptide antibiotics

Membrane-permeabilizing peptide antibiotics are an underutilized weapon in the battle against drug-resistant microorganisms. This is true, in part, because of the bottleneck caused by the lack of explicit design principles and the paucity of simple high-throughput methods for selection. In this work, we characterize the requirements for broad-spectrum antimicrobial activity by membrane permeabilization and find that different microbial membranes have very different susceptibilities to permeabilization by individual antimicrobial peptides. Broad-spectrum activity requires only that an AMP have at least a small amount of membrane-permeabilizing activity against multiple classes of microbes, a feature that we show to be rare in a peptide library containing many members with species-specific activity. We compare biological and vesicle-based high-throughput strategies for selecting such broad-spectrum AMPs from combinatorial peptide libraries and demonstrate that a simple in vitro, lipid vesicle-based high-throughput screen is the most effective strategy for rapid discovery of novel, broad-spectrum antimicrobial peptides.

Comparing bacterial membrane interactions of antimicrobial peptides and their mimics

Interactions with bacterial membranes are integral to the mechanisms of action of all antimicrobial peptides (AMPs), regardless of their final cellular targets. Here, we describe in detail two biophysical techniques that can be used to measure the membrane activities of AMPs and antimicrobial peptidomimetics: (1) a calcein leakage assay to investigate interactions between AMPs/peptidomimetics with large unilamellar vesicles and (2) a potential-sensitive dye-based depolarization assay to investigate interactions with the membranes of live bacteria. By comparing the membrane interactions of AMPs and their mimics, these techniques can provide insights into their extent of mimicry and their antimicrobial mechanisms.

Broad-spectrum antimicrobial peptides by rational combinatorial design and high-throughput screening: the importance of interfacial activity

We recently described 10 peptides selected from a 16,384-member combinatorial library based on their ability to permeabilize synthetic lipid vesicles in vitro. These peptides did not share a common sequence motif, length, or net charge; nonetheless, they shared a mechanism of action that is similar to the natural membrane permeabilizing antimicrobial peptides (AMP). To characterize the selected peptides and to compare the activity of AMPs in vivo and in vitro, we report on the biological activity of the same selected peptides in bacteria, fungi, and mammalian cells. Each of the peptides has sterilizing activity against all classes of microbes tested, at 2-8 microM peptide, with only slight hemolytic or cytotoxicity against mammalian cells. Similar to many natural AMPs, bacteria are killed within a few minutes of peptide addition, and the lethal step in vivo is membrane permeabilization. Single D-amino acid substitutions eliminated or diminished the secondary structure of the peptides, and yet, they retained activity against some microbes. Thus, secondary structure and biological activity are not coupled, consistent with the hypothesis that AMPs do not form pores of well-defined structure in membranes but rather destabilize membranes by partitioning into membrane interfaces and disturbing the organization of the lipids, a property that we have called "interfacial activity". The observation that broad-spectrum activity, but not all antimicrobial activity, is lost by small changes to the peptides suggests that the in vitro screen is specifically selecting for the rare peptides that have broad-spectrum activity. We put forth the hypothesis that methods focusing on screening peptide libraries in vitro for members with the appropriate interfacial activity can enable the design, selection, and discovery of novel, potent, and broad-spectrum membrane-active antibiotics.

Biomolecular engineering by combinatorial design and high-throughput screening: small, soluble peptides that permeabilize membranes

Rational design and engineering of membrane-active peptides remains a largely unsatisfied goal. We have hypothesized that this is due, in part, to the fact that some membrane activities, such as permeabilization, are not dependent on specific amino acid sequences or specific three-dimensional peptide structures. Instead they depend on interfacial activity: the ability of a molecule to partition into the membrane-water interface and to alter the packing and organization of lipids. Here we test that idea by taking a nonclassical approach to biomolecular engineering and design of membrane-active peptides. A 16,384-member rational combinatorial peptide library, containing peptides of 9-15 amino acids in length, was screened for soluble members that permeabilize phospholipid membranes. A stringent, two-phase, high-throughput screen was used to identify 10 unique peptides that had potent membrane-permeabilizing activity but were also water soluble. These rare and uniquely active peptides do not share any particular sequence motif, peptide length, or net charge, but instead they share common compositional features, secondary structure, and core hydrophobicity. We show that they function by a common mechanism that depends mostly on interfacial activity and leads to transient pore formation. We demonstrate here that composition-space peptide libraries coupled with function-based high-throughput screens can lead to the discovery of diverse, soluble, and highly potent membrane-permeabilizing peptides.

Viroporin potential of the lentivirus lytic peptide (LLP) domains of the HIV-1 gp41 protein

Background

Mechanisms by which HIV-1 mediates reductions in CD4+ cell levels in infected persons are being intensely investigated, and have broad implications for AIDS drug and vaccine development. Virally induced changes in membrane ionic permeability induced by lytic viruses of many families contribute to cytopathogenesis. HIV-1 induces disturbances in plasma membrane ion transport. The carboxyl terminus of TM (gp41) contains potential amphipathic α-helical motifs identified through their structural similarities to naturally occurring cytolytic peptides. These sequences have been dubbed lentiviral lytic peptides (LLP) -1, -2, and -3.

Results

Peptides corresponding to the LLP domains (from a clade B virus) partition into lipid membranes, fold into α-helices and disrupt model membrane permeability. A peptide corresponding to the LLP-1 domain of a clade D HIV-1 virus, LLP-1D displayed similar activity to the LLP-1 domain of the clade B virus in all assays, despite a lack of amino acid sequence identity.

Conclusion

These results suggest that the C-terminal domains of HIV-1 Env proteins may form an ion channel, or viroporin. Increased understanding of the function of LLP domains and their role in the viral replication cycle could allow for the development of novel HIV drugs.

Beta-sheet pore-forming peptides selected from a rational combinatorial library: mechanism of pore formation in lipid vesicles and activity in biological membranes

In a previous report we described the selection of potent, beta-sheet pore-forming peptides from a combinatorial library designed to mimic membrane-spanning beta-hairpins (Rausch, J. M., Marks, J. R., and Wimley, W. C. (2005) Proc. Natl. Acad. Sci. U.S.A. 102, 10511-10515). Here, we characterize their mechanism of action and compare the structure-function relationships in lipid vesicles to their activity in biological membranes. The pore-forming peptides bind to membrane interfaces and self-assemble into beta-sheets that cause a transient burst of graded leakage across the bilayers. Despite the continued presence of the structured peptides in the bilayer, at most peptide concentrations leakage is incomplete and ceases quickly after peptide addition with a deactivation half-time of several minutes. Molecules up to 3,000 Da escape from the transient pores, but much larger molecules do not. Fluorescence spectroscopy and quenching showed that the peptides reside mainly on the bilayer surface and are partially exposed to water, rather than in a membrane-spanning state. The "carpet" or "sinking raft" model of peptide pore formation offers a viable explanation for our observations and suggests that the selected pore-formers function with a mechanism that is similar to the natural pore-forming antimicrobial peptides. We therefore also characterized the antimicrobial and cytotoxic activity of these peptides. All peptides studied, including non-pore-formers, had sterilizing antimicrobial activity against at least some microbes, and most have low activity against mammalian cell membranes. Thus, the structure-function relationships that were apparent in the vesicle systems are similar to, but do not correlate completely with, the activity of the same peptides in biological membranes. However, of the peptides tested, only the pore-formers selected in the high-throughput screen have potent, broad-spectrum sterilizing activity against Gram-positive and Gram-negative bacteria as well as against fungi, while having only small lytic effects on human cells.

A fluorescence method for determining transport of charged compounds across lipid bilayer

There is a constant need for simple, economical and time-efficient methods which allow evaluating a compound's ability to penetrate the biological membrane, one of the key parameters needed to characterize biologically active compounds. In the paper we propose a new method of permeability determination. Instead of detecting the compound's concentration directly, we employ an approach in which the membrane interface is labeled with a fluorescein lipid probe; the probe is sensitive to the presence of charged compounds. The fluorescence intensity changes of the dye permanently attached to both sides of a model lipid bilayer are measured. Specifically, the time course of the fluorescence intensity changes following a rapid induction of a non-equilibrium state of the sample allows the evaluation of the membrane permeability for the compound. The method was validated by the determination of the phenyltin compound's transport through the model phosphatidylcholine unilamellar liposome bilayer.

Mechanism of action of cytotoxic cyclotides: cycloviolacin O2 disrupts lipid membranes

In recent years, the cyclotides have emerged as the largest family of naturally cyclized proteins. Cyclotides display potent cytotoxic activity that varies with the structure of the proteins, and combined with their unique structure, they represent novel cytotoxic agents. However, their mechanism of action is yet unknown. In this work we show that disruption of cell membranes plays a crucial role in the cytotoxic effect of the cyclotide cycloviolacin O2 (1), which has been isolated from Viola odorata. Cell viability and morphology studies on the human lymphoma cell line U-937 GTB showed that cells exposed to 1 displayed disintegrated cell membranes within 5 min. Functional studies on calcein-loaded HeLa cells and on liposomes showed rapid concentration-dependent release of their respective internal contents. The present results show that cyclotides have specific membrane-disrupting activity.

Rational combinatorial design of pore-forming beta-sheet peptides

Exogenous polypeptides that self-assemble on biological membranes into pores are abundant and structurally diverse, functioning as transporters, toxins, ion channels, and antibiotics. A means for designing novel pore-forming sequences would unlock new opportunities for the development and engineering of protein function in membranes. Toward this goal, we designed a 9,604-member rational combinatorial peptide library based on the structural principles of known membrane-spanning beta-sheets. When the library was screened under stringent conditions for sequences with pore-forming activity, a single active motif was found, which is characterized by aromatic residues at the lipid-exposed interfacial positions and basic residues in the pore-lining portion of the sequence. Peptides with this motif assembled on bilayer membranes into beta-sheets and formed transient peptide/lipid pores of approximately 1-nm diameter. The mechanism of action is very similar to that of natural, pore-forming peptides. These methods provide a powerful means for selecting and engineering novel pore-forming sequences and will open prospects for designing peptide antibiotics, biosensors, and new membrane protein structures.

Vesicular polydiacetylene sensor for colorimetric signaling of bacterial pore-forming toxin

A vesicle-based polydiacetylene biosensor for colorimetric detection of bacterial pore-forming toxin streptolysin O (SLO) is reported. The sensor was constructed with three lipid constituents: glycine-terminated diacetylene lipid Gly-PCDA, cell membrane-mimicking component PC-DIYNE, and cholesterol (CHO), which serves as the bait molecule. UV irradiation led to photopolymerization of the diacetylene lipids that gave the material a blue appearance. Incubation of the vesicles with SLO from Streptococcus pyrogenes turned the vesicle solution red, and the color change was found to be correlated to SLO concentration. The optimal sensing performance was found with vesicles consisting of 71% Gly-PCDA, 25% CHO, and 4% PC-DIYNE, and a correlation relationship was obtained for 20 HU to 500 HU/mL, or 100 pM to 6.3 nM of SLO toxin. Transmission electron microscopy and dynamic light scattering was used for further characterization of the vesicular assemblies. Transmembrane pores (holes) with diameter around 30 nm were observed on the vesicle membranes, in particular on the peripheral of the membrane structures, suggesting pore formation by SLO toxin provides the driving force for the color change of the functional vesicles.

Identification and characterization of the putative fusion peptide of the severe acute respiratory syndrome-associated coronavirus spike protein

Severe acute respiratory syndrome-associated coronavirus (SARS-CoV) is a newly identified member of the family Coronaviridae and poses a serious public health threat. Recent studies indicated that the SARS-CoV viral spike glycoprotein is a class I viral fusion protein. A fusion peptide present at the N-terminal region of class I viral fusion proteins is believed to initiate viral and cell membrane interactions and subsequent fusion. Although the SARS-CoV fusion protein heptad repeats have been well characterized, the fusion peptide has yet to be identified. Based on the conserved features of known viral fusion peptides and using Wimley and White interfacial hydrophobicity plots, we have identified two putative fusion peptides (SARS(WW-I) and SARS(WW-II)) at the N terminus of the SARS-CoV S2 subunit. Both peptides are hydrophobic and rich in alanine, glycine, and/or phenylalanine residues and contain a canonical fusion tripeptide along with a central proline residue. Only the SARS(WW-I) peptide strongly partitioned into the membranes of large unilamellar vesicles (LUV), adopting a beta-sheet structure. Likewise, only SARS(WW-I) induced the fusion of LUV and caused membrane leakage of vesicle contents at peptide/lipid ratios of 1:50 and 1:100, respectively. The activity of this synthetic peptide appeared to be dependent on its amino acid (aa) sequence, as scrambling the peptide rendered it unable to partition into LUV, assume a defined secondary structure, or induce both fusion and leakage of LUV. Based on the activity of SARS(WW-I), we propose that the hydrophobic stretch of 19 aa corresponding to residues 770 to 788 is a fusion peptide of the SARS-CoV S2 subunit.