The Influence of Sorbitol on the Adsorption of Surfactants at the Air-Liquid Interface

Stability of Foams in Vacuum Drying Processes. Effects of Interactions between Sugars, Proteins, and Surfactants on Foam Stability and Dried Foam Properties

The hypothesis was that saccharides mediate interactions between surface-active components and that this will have an impact on foam decay during the drying process. Static light scattering was performed to determine changes in interactions between the foam stabilizer on a molecular level. Furthermore, pendant drop and oscillating drop measurements were performed to examine the surface tension and surface rheology. Foams were dried in conventional dryers as well as microwave-supported vacuum dryers. Final foam properties were determined. It was shown that the addition of sugars, often added as protective substances for sensitive organic molecules, resulted in lower repulsion between different types of surface-active components, namely polysorbate 80 and β-lactoglobulin (β-lg). Differences in impact of the types of sugars and between different types of surfactant, protein, and small molecules were observed influencing the foam decay behavior. The interfacial properties of polysorbate 80 and β-lg were influenced by the type of the used sugars. The surface elasticity of protein stabilized surfaces was higher compared to that of polysorbate stabilized systems. Protein stabilized systems remained more stable compared to polysorbate systems, which was also affected by the used saccharide. Overall, a correlation between molecular interactions and foam decay behavior was found.

Adsorption of model perfumes at the air-solution interface by coadsorption with an anionic surfactant

The adsorption of the model perfumes phenyl ethanol, PE, and linalool, LL, at the air-solution interface by coadsorption with the anionic surfactant sodium dodecyl 6-benezene sulfonate, LAS-6, has been studied primarily by neutron reflectivity, NR. The variation in the mixed surface adsorption with solution composition is highly nonideal, and the more hydrophobic LL is more surface active. At a LAS-6 concentration of 0.5 mM the adsorption of PE and LL is broadly similar but with the LL systematically more surface active, and at 2 mM the LL completes more effectively for the surface than the PE. The variation in surface composition with solution composition and concentration reflect the greater hydrophobicity and hence surface activity of LL, and the greater solubility of PE in aqueous solution. Changing the geometry of the LAS isomer, from the symmetrical LAS-6 geometry to the more asymmetrical LAS-4, results in the LL competing more effectively for the surface due to changes in the packing constraints associated with the hydrophobic region. The results provide insights into the factors that affect coadsorption that can be more broadly applied to the surface delivery of a wide range of molecules other than perfumes.

Impact of model perfume molecules on the self-assembly of anionic surfactant sodium dodecyl 6-benzene sulfonate

The impact of two model perfumes with differing degrees of hydrophobicity/hydrophilicity, linalool (LL) and phenylethanol (PE), on the solution structure of anionic surfactant sodium dodecyl 6-benzene sulfonate, LAS-6, has been studied by small angle neutron scattering, SANS. For both types of perfume molecules, complex phase behavior is observed. The phase behavior depends upon the concentration, surfactant/perfume composition, and type of perfume. The more hydrophilic perfume PE promotes the formation of more highly curved structures. At relatively low surfactant concentrations, small globular micelles, L1, are formed. These become perfume droplets, L(sm), stabilized by the surfactant at much higher perfume solution compositions. At higher surfactant concentrations, the tendency of LAS-6 to form more planar structures is evident. The more hydrophobic linalool promotes the formation of more planar structures. Combined with the greater tendency of LAS-6 to form planar structures, this results in the planar structures dominating the phase behavior for the LAS-6/linalool mixtures. For the LAS-6/linalool mixture, the self-assembly is in the form of micelles only at the lowest surfactant and perfume concentrations. Over most of the concentration-composition space explored, the structures are predominantly lamellar, L(α), or vesicle, L(v), or in the form of a lamellar/micellar coexistence. At low and intermediate amounts of LL, a significantly different structure is observed, and the aggregates are in the form of small, relatively monodisperse vesicles (i.e., nanovesicles), L(sv).

A dually effective inorganic salt at inducing obvious viscoelastic behavior of both cationic and anionic surfactant solutions

Hydrazine nitrate (HN), an inorganic salt, was first found to have dual effects on inducing obvious viscoelasticity of both cationic and anionic surfactant solutions. It was interesting that the surfactant solutions exhibited characteristic wormlike micelle features with strong viscoelastic properties upon the addition of this inorganic salt. The rheological properties of the surfactant solutions have been measured and discussed. The apparent viscosity of the solutions showed a volcano change with an increase of the HN concentration. Correspondingly, the microstructures of the micelles in the solutions changed with the apparent viscosity. First, wormlike micelles began to form and grew with an increase of the HN concentration. Subsequently, the systems exhibited linear viscoelasticity with characteristics of a Maxwell fluid in the intermediate mass fraction range, which originated from a 3D entangled network of wormlike micelles. Finally, a transition from linear micelles to branched ones probably took place at higher HN contents. In addition, the origin of the dual effects brought by HN addition on inducing viscoelasticity in both cationic and anionic surfactant solutions was investigated.

Adsorption of Nonionic Mixtures at the Air–Water Interface: Effects of Temperature and Electrolyte

Specular neutron reflection has been used to investigate the effects of temperature and added electrolyte on the adsorption of nonionic surfactants and nonionic surfactant mixtures at the air-water interface. For the alkyl poly-oxyethylene oxide nonionic surfactants, C(n)EO(m), the adsorption at the air-water interface is independent of temperature for surfactants with shorter ethylene oxide groups, whereas there is an increasing tendency for increased adsorption with temperature for surfactants with longer ethylene oxide groups. The addition of "salting in" (sodium thiocyanate, NaSCN) and "salting out" (sodium chloride, NaCl, sodium sulphate, Na2SO4) electrolyte results in reduced and enhanced adsorption, respectively, for C12EO8, whereas both types of electrolyte result in enhanced adsorption for C12EO12. The addition of electrolyte does not substantially alter the temperature dependence of the adsorption of the pure monolayers. For the nonionic mixtures of C12EO3/C12EO8 increasing temperature results in a surface richer in the least surface-active component, C12EO8. For the same nonionic mixture, the addition of "salting in" and "salting out" electrolyte results in an reduced and increased adsorption, respectively. The addition of "salting in" electrolyte results in a surface more rich in C12EO3, whereas for the addition of both "salting in" and "salting out" electrolyte the surface composition is essentially unaltered.

Surfactant layers at the air/water interface: structure and composition

The use of neutron reflectometry to study the structure and composition of surfactant layers adsorbed at the air/water interface is reviewed. A critical assessment of the results from this new technique is made by comparing them with the information available from all other techniques capable of investigating this interface.