Multiple DNA conformational changes induced by an initiator protein precede the nicking reaction in a rolling circle replication origin

A nucleotide-sensing endonuclease from the Gabija bacterial defense system

The arms race between bacteria and phages has led to the development of exquisite bacterial defense systems including a number of uncharacterized systems distinct from the well-known restriction-modification and CRISPR/Cas systems. Here, we report functional analyses of the GajA protein from the newly predicted Gabija system. The GajA protein is revealed as a sequence-specific DNA nicking endonuclease unique in that its activity is strictly regulated by nucleotide concentration. NTP and dNTP at physiological concentrations can fully inhibit the robust DNA cleavage activity of GajA. Interestingly, the nucleotide inhibition is mediated by an ATPase-like domain, which usually hydrolyzes ATP to stimulate the DNA cleavage when associated with other nucleases. These features suggest a mechanism of the Gabija defense in which an endonuclease activity is suppressed under normal conditions, while it is activated by the depletion of NTP and dNTP upon the replication and transcription of invading phages. This work highlights a concise strategy to utilize a DNA nicking endonuclease for phage resistance via nucleotide regulation.

Various mutations compensate for a deleterious lacZα insert in the replication enhancer of M13 bacteriophage

M13 and other members of the Ff class of filamentous bacteriophages have been extensively employed in myriad applications. The Ph.D. series of phage-displayed peptide libraries were constructed from the M13-based vector M13KE. As a direct descendent of M13mp19, M13KE contains the lacZα insert in the intergenic region between genes IV and II, where it interrupts the replication enhancer of the (+) strand origin. Phage carrying this 816-nucleotide insert are viable, but propagate in E. coli at a reduced rate compared to wild-type M13 phage, presumably due to a replication defect caused by the insert. We have previously reported thirteen compensatory mutations in the 5'-untranslated region of gene II, which encodes the replication initiator protein gIIp. Here we report several additional mutations in M13KE that restore a wild-type propagation rate. Several clones from constrained-loop variable peptide libraries were found to have ejected the majority of lacZα gene in order to reconstruct the replication enhancer, albeit with a small scar. In addition, new point mutations in the gene II 5'-untranslated region or the gene IV coding sequence have been spontaneously observed or synthetically engineered. Through phage propagation assays, we demonstrate that all these genetic modifications compensate for the replication defect in M13KE and restore the wild-type propagation rate. We discuss the mechanisms by which the insertion and ejection of the lacZα gene, as well as the mutations in the regulatory region of gene II, influence the efficiency of replication initiation at the (+) strand origin. We also examine the presence and relevance of fast-propagating mutants in phage-displayed peptide libraries.

The presence of tomato leaf curl Kerala virus AC3 protein enhances viral DNA replication and modulates virus induced gene-silencing mechanism in tomato plants

Background

Geminiviruses encode few viral proteins. Most of the geminiviral proteins are multifunctional and influence various host cellular processes for the successful viral infection. Though few viral proteins like AC1 and AC2 are well characterized for their multiple functions, role of AC3 in the successful viral infection has not been investigated in detail.

Results

We performed phage display analysis with the purified recombinant AC3 protein with Maltose Binding Protein as fusion tag (MBP-AC3). Putative AC3 interacting peptides identified through phage display were observed to be homologous to peptides of proteins from various metabolisms. We grouped these putative AC3 interacting peptides according to the known metabolic function of the homologous peptide containing proteins. In order to check if AC3 influences any of these particular metabolic pathways, we designed vectors for assaying DNA replication and virus induced gene-silencing of host gene PCNA. Investigation with these vectors indicated that AC3 enhances viral replication in the host plant tomato. In the PCNA gene-silencing experiment, we observed that the presence of functional AC3 ORF strongly manifested the stunted phenotype associated with the virus induced gene-silencing of PCNA in tomato plants.

Conclusions

Through the phage display analysis proteins from various metabolic pathways were identified as putative AC3 interacting proteins. By utilizing the vectors developed, we could analyze the role of AC3 in viral DNA replication and host gene-silencing. Our studies indicate that AC3 is also a multifunctional protein.

RepD-mediated recruitment of PcrA helicase at the Staphylococcus aureus pC221 plasmid replication origin, oriD

Plasmid encoded replication initiation (Rep) proteins recruit host helicases to plasmid replication origins. Previously, we showed that RepD recruits directionally the PcrA helicase to the pC221 oriD, remains associated with it, and increases its processivity during plasmid unwinding. Here we show that RepD forms a complex extending upstream and downstream of the core oriD. Binding of RepD causes remodelling of a region upstream from the core oriD forming a 'landing pad' for the PcrA. PcrA is recruited by this extended RepD-DNA complex via an interaction with RepD at this upstream site. PcrA appears to have weak affinity for this region even in the absence of RepD. Upon binding of ADPNP (non-hydrolysable analogue of ATP), by PcrA, a conformational rearrangement of the RepD-PcrA-ATP initiation complex confines it strictly within the boundaries of the core oriD. We conclude that RepD-mediated recruitment of PcrA at oriD is a three step process. First, an extended RepD-oriD complex includes a region upstream from the core oriD; second, the PcrA is recruited to this upstream region and thirdly upon ATP-binding PcrA relocates within the core oriD.

Quantitative analyses of RAG-RSS interactions and conformations revealed by atomic force microscopy

During V(D)J recombination, site specific DNA excision is dictated by the binding of RAG1/2 proteins to the conserved recombination signal sequence (RSS) within the genome. The interaction between RAG1/2 and RSS is thought to involve a large DNA distortion that is permissive for DNA cleavage. In this study, using atomic force microscopy imaging (AFM), we analyzed individual RAG-RSS complexes, in which the bending angle of RAG-associated RSS substrates could be visualized and quantified. We provided the quantitative measurement on the conformations of specific RAG-12RSS complexes. Previous data indicating the necessity of RAG2 for recombination implies a structural role in the RAG-RSS complex. Surprisingly, however, no significant difference was observed in conformational bending with AFM between RAG1-12RSS and RAG1/2-12RSS. RAG1 was found sufficient to induce DNA bending, and the addition of RAG2 did not change the bending profile. In addition, a prenicked 12RSS bound by RAG1/2 proteins displayed a conformation similar to the one observed with the intact 12RSS, implying that no greater DNA bending occurs after the nicking step in the signal complex. Taken together, the quantitative AFM results on the components of the recombinase emphasize a tightly held complex with a bend angle value near 60 degrees , which may be a prerequisite step for the site-specific nicking by the V(D)J recombinase.

Bacteriophage replication modules

Bacteriophages (prokaryotic viruses) are favourite model systems to study DNA replication in prokaryotes, and provide examples for every theoretically possible replication mechanism. In addition, the elucidation of the intricate interplay of phage-encoded replication factors with 'host' factors has always advanced the understanding of DNA replication in general. Here we review bacteriophage replication based on the long-standing observation that in most known phage genomes the replication genes are arranged as modules. This allows us to discuss established model systems--f1/fd, phiX174, P2, P4, lambda, SPP1, N15, phi29, T7 and T4--along with those numerous phages that have been sequenced but not studied experimentally. The review of bacteriophage replication mechanisms and modules is accompanied by a compendium of replication origins and replication/recombination proteins (available as supplementary material online).

Detection of template strand switching during initiation and termination of DNA replication of porcine circovirus

Nucleotide substitution mutagenesis was conducted to investigate the importance of the inverted repeats (palindrome) at the origin of DNA replication (Ori) of porcine circovirus type 1 (PCV1). Viral genomes with engineered mutations on either arm or both arms of the palindrome were not impaired in protein synthesis and yielded infectious progeny viruses with restored or new palindromes. Thus, a flanking palindrome at the Ori was not essential for initiation of DNA replication, but one was generated inevitably at termination. Among the 26 viruses recovered, 16 showed evidence of template strand switching, from minus-strand genome DNA to palindromic strand DNA, during biosynthesis of the Ori. Here I propose a novel rolling-circle "melting-pot" model for PCV1 DNA replication. In this model, the replicator Rep protein complex binds, destabilizes, and nicks the Ori sequence to initiate leading-strand DNA synthesis. All four strands of the destabilized inverted repeats exist in a "melted" configuration, and the minus-strand viral genome and a palindromic strand are available as templates, simultaneously, during initiation or termination of DNA replication. Inherent in this model is a "gene correction" or "terminal repeat correction" mechanism that can restore mutilated inverted-repeat sequences to a palindrome at the Ori of circular DNAs or at the termini of circularized linear DNAs. Potentially, the melted state of the inverted repeats increases the rate of noncomplementary or illegitimate nucleotide incorporation into the palindrome. Thus, this melting-pot model provides insight into the mechanisms of DNA replication, gene correction, and illegitimate recombination at the Ori of PCV1, and it may be applicable to the replication of other circular DNA molecules.

Analysis of the intrinsic bend in the M13 origin of replication by atomic force microscopy

Atomic force microscopy (AFM) has been used to image a 471-bp bent DNA restriction fragment derived from the M13 origin of replication in plasmid LITMUS 28, and a 476-bp normal, unbent fragment from plasmid pUC19. The most probable angle of curvature of the 471-bp DNA fragment is 40-50 degrees, in reasonably good agreement with the bend angle determined by transient electric birefringence, 38 degrees +/- 7 degrees. The normal 476-bp DNA fragment exhibited a Gaussian distribution of bend angles centered at 0 degrees, indicating that this fragment does not contain an intrinsic bend. The persistence length, P, was estimated to be 60 +/- 8 and 62 +/- 8 nm for the 471- and 476-bp fragments, respectively, from the observed mean-square end-to-end distances in the AFM images. Since the P-values of the normal and bent fragments are close to each other, the overall flexibility of DNA fragments of this size is only marginally affected by the presence of a stable bend. The close agreement of AFM and transient electric birefringence results validates the suitability of both methods for characterizing DNA bending and flexibility.

Artificial site-specific DNA-nicking system based on common restriction enzyme assisted by PNA openers

We report on the peptide nucleic acid (PNA)-directed design of a DNA-nicking system that enables selective and quantitative cleavage of one strand of duplex DNA at a designated site, thus mimicking natural nickases and significantly extending their potential. This system exploits the ability of pyrimidine PNAs to serve as openers for specific DNA sites by invading the DNA duplex and exposing one DNA strand for oligonucleotide hybridization. The resultant secondary duplex can act as a substrate for a restriction enzyme, which ultimately creates a nick in the parent DNA. We demonstrate that several restriction enzymes of different types could be successfully used in the PNA-assisted system we developed. Importantly, the enzyme cleavage efficiency is basically not impaired on such artificially generated substrates, compared with the efficiency on regular DNA duplexes. Our design originates a vast class of semisynthetic rare-cleaving DNA nickases, which are essentially absent at present. In addition, we show that the site-specific PNA-assisted nicking of duplex DNA can be engaged in a rolling-circle DNA amplification (RCA) reaction. This new RCA format demonstrates the practical potential of the novel biomolecular tool we propose for DNA technology and DNA diagnostics.

Engineering a nicking endonuclease N.AlwI by domain swapping

Changing enzymatic function through genetic engineering still presents a challenge to molecular biologists. Here we present an example in which changing the oligomerization state of an enzyme changes its function. Type IIs restriction endonucleases such as AlwI usually fold into two separate domains: a DNA-binding domain and a catalytic/dimerization domain. We have swapped the putative dimerization domain of AlwI with a nonfunctional dimerization domain from a nicking enzyme, N.BstNBI. The resulting chimeric enzyme, N.AlwI, no longer forms a dimer. Interestingly, the monomeric N.AlwI still recognizes the same sequence as AlwI but only cleaves the DNA strand containing the sequence 5'-GGATC-3' (top strand). In contrast, the wild-type AlwI exists as a dimer in solution and cleaves two DNA strands; the top strand is cleaved by an enzyme binding to that sequence, and its complementary bottom strand is cleaved by the second enzyme dimerized with the first enzyme. N.AlwI is unable to form a dimer and therefore nicks DNA as a monomer. In addition, the engineered nicking enzyme is at least as active as the wild-type AlwI and is thus a useful enzyme. To our knowledge, this is the first report of creating a nicking enzyme by domain swapping.

Converting MlyI endonuclease into a nicking enzyme by changing its oligomerization state

N.BstNBI is a nicking endonuclease that recognizes the sequence GAGTC and nicks one DNA strand specifically. The Type IIs endonuclease, MlyI, also recognizes GAGTC, but cleaves both DNA strands. Sequence comparisons revealed significant similarities between N.BstNBI and MlyI. Previous studies showed that MlyI dimerizes in the presence of a cognate DNA, whereas N.BstNBI remains a monomer. This suggests that dimerization may be required for double-stranded cleavage. To test this hypothesis, we used a multiple alignment to design mutations to disrupt the dimerization function of MlyI. When Tyr491 and Lys494 were both changed to alanine, the mutated endonuclease, N.MlyI, no longer formed a dimer and cleaved only one DNA strand specifically. Thus, we have shown that changing the oligomerization state of an enzyme changes its enzymatic function. This experiment also established a protocol that could be applied to other Type IIs endonucleases in order to generate more novel nicking endonucleases.

Role of the double-strand origin cruciform in pT181 replication

pT181 is a small rolling-circle plasmid from Staphylococcus aureus whose initiator protein, RepC, melts the plasmid's double-strand origin (DSO) and extrudes a cruciform involving IR II, a palindrome flanking the initiation nick site. We have hypothesized that the cruciform is required for initiation, providing a single-stranded region for the assembly of the replisome (R. Jin et al., 1997, EMBO J. 16, 4456-4566). In this study, we have tested the requirement for cruciform extrusion by disrupting the symmetry of the IR II palindrome or by increasing its length. The modified DSOs were tested for replication with RepC in trans. Rather surprisingly, disruption of the IR II symmetry had no detectable effect on replication or on competitivity of the modified DSO, though plasmids with IR II disrupted were less efficiently relaxed than the wild type by RepC. However, in conjunction with IR II disruption, modification of the tight RepC binding site IR III blocked replication. These results define two key elements of the pT181 initiation mechanism--the IR II conformation and the RepC binding site (IR III)--and they indicate that pT181 replication initiation is sufficiently robust to be able to compensate for significant modifications in the configuration of the DSO.

The nicking endonuclease N.BstNBI is closely related to type IIs restriction endonucleases MlyI and PleI

N.BstNBI is a nicking endonuclease that recognizes the sequence GAGTC and nicks the top strand preferentially. The Type IIs restriction endonucleases PleI and MlyI also recognize GAGTC, but cleave both DNA strands. Cloning and sequencing the genes encoding each of these three endonucleases discloses significant sequence similarities. Mutagenesis studies reveal a conserved set of catalytic residues among the three endonucleases, suggesting that they are closely related to each other. Furthermore, PleI and MlyI contain a single active site for DNA cleavage. The results from cleavage assays show that the reactions catalyzed by PleI and MlyI are sequential two step processes. The double-stranded DNA is first nicked on one DNA strand and then further cleaved on the second strand to form linear DNA. Gel filtration analysis shows that MlyI dimerizes in the presence of a cognate DNA and Ca(2+) whereas N.BstNBI remains a monomer, implicating dimerization as a requisite for the second strand cleavage. We suggest that N.BstNBI, MlyI and PleI diverged from a common ancestor and propose that N.BstNBI differs from MlyI and PleI in having an extremely limited second strand cleavage activity, resulting in a site-specific nicking endonuclease.

Characterization of the specific DNA nicking activity of restriction endonuclease N.BstNBI

N.BstNBI is a unique restriction endonuclease isolated from Bacillus stearothermophilus. We have characterized the recognition sequence and the cleavage site of N.BstNBI. Mapping of cleavage sites of N.BstNBI showed that it recognizes an asymmetric sequence, 5' GAGTC 3', and cleaves only on the top strand 4 base pairs away from its recognition sequence. To verify the nicking activity of N. BstNBI, we have constructed two plasmids containing a single recognition sequence (pNB1) or no recognition site (pNB0). When pNB1 and pNB0 were incubated with the enzyme, N.BstNBI nicked only the plasmid pNB1, suggesting that N.BstNBI is a specific nicking endonuclease.

Selective cleavage of AAVS1 substrates by the adeno-associated virus type 2 rep68 protein is dependent on topological and sequence constraints

The adeno-associated virus type 2 (AAV-2) Rep78 and Rep68 proteins are required for replication of the virus as well as its site-specific integration into a unique site, called AAVS1, of human chromosome 19. Rep78 and Rep68 initiate replication by binding to a Rep binding site (RBS) contained in the AAV-2 inverted terminal repeats (ITRs) and then specifically nicking at a nearby site called the terminal resolution site (trs). Similarly, Rep78 and Rep68 are postulated to trigger the integration process by binding and nicking RBS and trs homologues present in AAVS1. However, Rep78 and Rep68 cleave in vitro AAVS1 duplex-linear substrates much less efficiently than hairpinned ITRs. In this study, we show that the AAV-2 Rep68 endonuclease activity is affected by the topology of the substrates in that it efficiently cleaves in vitro in a site- and strand-specific manner the AAVS1 trs only if this sequence is in a supercoiled (SC) conformation. DNA sequence mutagenesis in the context of SC templates allowed us to elucidate for the first time the AAVS1 trs sequence and position requirements for Rep68-mediated cleavage. Interestingly, Rep68 did not cleave SC templates containing RBS from other sites of the human genome. These findings have intriguing implications for AAV-2 site-specific integration in vivo.

Cisplatin (cis-Pt(NH(3))(2)Cl(2)) and cis-[Pt(NH(3))(2)(H(2)O)(2)](2+) Intrastrand Cross-Linking Reactions at the Telomere GGGT DNA Sequence Embedded in a Duplex, a Hairpin, and a Bulged Duplex: Use of Mg(2+) and Zn(2+) to Convert a Hairpin to a Bulged Duplex

In the past, we showed that metal species have a high affinity for the central G in the GGG sequence of the duplex d(A(1)T(2)G(3)G(4)G(5)T(6)A(7)C(8)C(9)C(10)A(11)T(12))(2) (G3-D) and that cisplatin (cis-Pt(NH(3))(2)Cl(2)) and G3-D formed an N7-Pt-N7 G(4),G(5) intrastrand cross-link preferentially over the G(3),G(4) adduct ( approximately 25:1). Thus, a putative G(4) monoadduct was postulated to cross-link in the 3'- rather than the normally more favorable 5'-direction. To evaluate this hypothesis and also to explore why the G3-D G(4),G(5) adduct had an unusual hairpin structure, we have now introduced the use of N,N'-dimethylthiourea (DMTU) as a monoadduct trap and have extended the study to a G3-D analogue with a hairpin form, d(A(1)T(2)G(3)G(4)G(5)T(6)T(7)C(8)C(9)C(10)A(11)T(12)) (G3-H). Chemical shift and 2D (1)H and (13)C NMR data indicated that the G3-H hairpin has a stem region with B-form structure and a nonhelical loop region. Zn(2+) or Mg(2+) ions transformed G3-H into a bulged duplex. Downfield shifts of G(4)H8 and G(4)C8 NMR signals indicated that Zn(2+) binds preferentially to G(4)N7. Reaction of cisplatin or cis-[Pt(NH(3))(2)(H(2)O)(2)](2+) with the bulged duplex and hairpin forms of G3-H gave a similar intrastrand cross-link ratio, G(4),G(5):G(3),G(4) = 7:3. This ratio is insensitive to DNA form or Pt leaving group. For G3-D this ratio is lower in the cis-[Pt(NH(3))(2)(H(2)O)(2)](2+) reaction ( approximately 1:1) than in the cisplatin reaction (25:1), indicating that the leaving group influences the cross-linking step for G3-D. The G(4) monoadducts of the cis-Pt(NH(3))(2)Cl(2)-G3-H and -G3-D and the cis-[Pt(NH(3))(2)(H(2)O)(2)](2+)-G3-D reactions were trapped with DMTU, but no monoadduct was trapped in the cis-[Pt(NH(3))(2)(H(2)O)(2)](2+)-G3-H reaction. The results suggest that the respective monoadducts are more long-lived for G3-D. We postulate that the G(5) in the G3-D Cl-G(4) monoadduct is placed in a favorable position to form the cross-link because of a prior conformational change induced by G(4)-A(7) stacking. This accounts for the very high selectivity for 3'-cross-linking. Nevertheless, in all other cases, regardless of the form or conformation, 3'-direction cross-linking is unusually favored at GGGT sequences, suggesting that the sequence itself contributes greatly to the 3'-cross-linking preference; since telomeres have multiple repeats of this GGGT sequence, this finding may have biological relevance.

Initiation of DNA replication in a eukaryotic rolling-circle replicon: identification of multiple DNA-protein complexes at the geminivirus origin

The mechanism of initiation of DNA replication in eukaryotic rolling- circle replicons is still poorly understood in molecular terms. Geminiviruses, a family of plant DNA viruses, which use this strategy during part of their replicative cycle, replicate in the nucleus and are amenable to molecular studies. Except for the virally encoded initiator protein (Rep), geminivirus DNA replication relies on cellular factors, likely interfering with cell cycle regulation of the infected cell. Here, we report the identification of three distinct DNA-protein complexes of the DNA replication initiator protein encoded by wheat dwarf geminivirus (WDV) within viral regulatory sequences controlling DNA replication and transcription. We have mapped the WDV Rep binding sites by combining gel-shift assays, electron microscopy and DNase I footprinting. Two of the Rep-DNA complexes (C and the V) are high-affinity complexes, located in the proximity of the two divergent TATA boxes, at 150 and 90 bp, respectively, from the DNA replication initiation site. The third one, the O-complex, is a low-affinity complex, which can assemble under conditions supporting the DNA cleavage reaction. This suggests that it might be responsible for initiation of rolling-circle DNA replication in WDV and other members of the Mastrevirus genus.

Filamentous phage replication initiator protein gpII forms a covalent complex with the 5' end of the nick it introduced

Rolling circle type DNA replication is initiated by introduction of a nick in the leading strand of the origin by the initiator protein, which in most cases binds covalently to the 5' end of the nick. In filamentous phage, however, such a covalent complex has not been detected. Using a suitable substrate and short reaction time, we show that filamentous phage initiator gpII forms a covalent complex with nicked DNA, which rapidly dissociates unless gpII is inactivated. A peptide-DNA complex was isolated from trypsin digest of the complex by ion-exchange column chromatography and gel filtration, and its peptide sequence was determined. The result indicated that gpII was linked to DNA by the tyrosine residue at position 197 from the N-terminus. The mutant protein in which this tyrosine was replaced by phenylalanine did not show any detectable activity to complement gene II amber mutant phage in vivo. In vitro, the mutant protein recognized the origin and bent DNA as well as the wild-type does, but failed to introduce a nick and to relax the superhelicity of cognate DNA.

High-mobility group 1/2 proteins are essential for initiating rolling-circle-type DNA replication at a parvovirus hairpin origin

Rolling-circle replication is initiated by a replicon-encoded endonuclease which introduces a single-strand nick into specific origin sequences, becoming covalently attached to the 5' end of the DNA at the nick and providing a 3' hydroxyl to prime unidirectional, leading-strand synthesis. Parvoviruses, such as minute virus of mice (MVM), have adapted this mechanism to amplify their linear single-stranded genomes by using hairpin telomeres which sequentially unfold and refold to shuttle the replication fork back and forth along the genome, creating a continuous, multimeric DNA strand. The viral initiator protein, NS1, then excises individual genomes from this continuum by nicking and reinitiating synthesis at specific origins present within the hairpin sequences. Using in vitro assays to study ATP-dependent initiation within the right-hand (5') MVM hairpin, we have characterized a HeLa cell factor which is absolutely required to allow NS1 to nick this origin. Unlike parvovirus initiation factor (PIF), the cellular complex which activates NS1 endonuclease activity at the left-hand (3') viral origin, the host factor which activates the right-hand hairpin elutes from phosphocellulose in high salt, has a molecular mass of around 25 kDa, and appears to bind preferentially to structured DNA, suggesting that it might be a member of the high-mobility group 1/2 (HMG1/2) protein family. This prediction was confirmed by showing that purified calf thymus HMG1 and recombinant human HMG1 or murine HMG2 could each substitute for the HeLa factor, activating the NS1 endonuclease in an origin-specific nicking reaction.

Contrasting lifestyles of rolling-circle phages and plasmids

The rolling-circle mechanism of DNA replication is used by small prokaryotic genomes, such as single-stranded phages and plasmids. However, phages and plasmids have adapted the rolling-circle mechanism differently to suit their contrasting biological needs. The phi X174 phage uses a monomeric initiator protein catalytically, displays incomplete termination and recycles the initiator protein, in order to mass-produce phage progeny. By contrast, to control replication precisely, the pT181 plasmid uses a dimeric initiator protein stochiometrically, completes termination and inactivates the initiator after each replication cycle. The phi X174 phage and the pT181 plasmid represent paradigmatic adaptations of the rolling-circle mechanism and could provide models for other replicons.

A macrocyclic bis-acridine shifts the equilibrium from duplexes towards DNA hairpins

Nucleic acids can undergo dynamic conformational changes associated with the regulation of biological processes. A molecule presenting larger affinities for alternative structures relative to a duplex is expected to modify such conformational equilibria. We have previously reported that macrocyclic bis-acridine binds preferentially to single-stranded regions, especially DNA hairpins, due to steric effects. Here, we show, using gel electrophoresis, fluorescence and melting temperature experiments, that the macrocycle bis-acridine shifts an equilibrium from a duplex towards the corresponding hairpins. Competition experiments enlighten the higher affinity of the macrocycle for hairpins compared with double-stranded DNA. The macrocycle bis-acridine destabilizes a synthetic polynucleotide, by the formation of premelted areas. By extrapolation, the macrocycle bis-acridine should be able to disrupt, at least locally, genomic DNA duplexes and to stabilize unpaired areas, especially palindromic ones forming hairpins. Such macrocyclic compounds may have potential applications in the therapy of diseases involving hairpins.

Cruciform structures and functions

In this paper, a structure-function analysis of B-DNA self-fitting is reviewed in the light of recent oligonucleotide crystal structures. Their crystal packings provided a high-resolution view of B-DNA helices closely and specifically fitted by groove-backbone interaction, a natural and biologically relevant manner to assemble B-DNA helices. In revealing that new properties of the DNA molecule emerge during condensation, these crystallographic studies have pointed to the biological importance of DNA—DNA interactions.

Sequence of plasmid pGT5 from the archaeon Pyrococcus abyssi: evidence for rolling-circle replication in a hyperthermophile

The plasmid pGT5 (3,444 bp) from the hyperthermophilic archaeon Pyrococcus abyssi GE5 has been completely sequenced. Two major open reading frames with a good coding probability are located on the same strand and cover 85% of the total sequence. The larger open reading frame encodes a putative polypeptide which exhibits sequence similarity with Rep proteins of plasmids using the rolling-circle mechanism for replication. Upstream of this open reading frame, we have detected an 11-bp motif identical to the double-stranded origin of several bacterial plasmids that replicate via the rolling-circle mechanism. A putative single-stranded origin exhibits similarities both to bacterial primosome-dependent single-stranded initiation sites and to bacterial primase (dnaG) start sites. A single-stranded form of pGT5 corresponding to the plus strand was detected in cells of P. abyssi. These data indicate that pGT5 replicates via the rolling-circle mechanism and suggest that members of the domain Archaea contain homologs of several bacterial proteins involved in chromosomal DNA replication. Phylogenetic analysis of Rep proteins from rolling-circle replicons suggest that diverse families diverged before the separation of the domains Archaea, Bacteria, and Eucarya.

A DNA structure is required for geminivirus replication origin function

The genome of the geminivirus tomato golden mosaic virus (TGMV) consists of two single-stranded circular DNAs, A and B, that replicate through a rolling-circle mechanism in nuclei of infected plant cells. The TGMV origin of replication is located in a conserved 5' intergenic region and includes at least two functional elements: the origin recognition site of the essential viral replication protein, AL1, and a sequence motif with the potential to form a hairpin or cruciform structure. To address the role of the hairpin motif during TGMV replication, we constructed a series of B-component mutants that resolved sequence changes from structural alterations of the motif. Only those mutant B DNAs that retained the capacity to form the hairpin structure replicated to wild-type levels in tobacco protoplasts when the viral replication proteins were provided in trans from a plant expression cassette. In contrast, the same B DNAs replicated to significantly lower levels in transient assays that included replicating, wild-type TGMV A DNA. These data established that the hairpin structure is essential for TGMV replication, whereas its sequence affects the efficiency of replication. We also showed that TGMV AL1 functions as a site-specific endonuclease in vitro and mapped the cleavage site to the loop of the hairpin. In vitro cleavage analysis of two TGMV B mutants with different replication phenotypes indicated that there is a correlation between the two assays for origin activity. These results suggest that the in vivo replication results may reflect structural and sequence requirements for DNA cleavage during initiation of rolling-circle replication.

The interaction of RepC initiator with iterons in the replication of the broad host-range plasmid RSF1010

The replication origin of the broad host-range plasmid RSF1010 contains 3.5 copies of a 20mer iteron sequence that bind specifically to the plasmid-encoded initiator, RepC. Here we demonstrated that even a single iteron was bent upon binding of RepC. Moreover, the bending angle seems to become larger along with the increment of the number of iterons. In a mutational analysis of the iteron sequence, we isolated seven kinds of base-substitution mutants of iterons, and estimated the replication activity of these mutants in vivo. We found that each of the subsections in the 20mer iteron sequence made a distinct contribution to the initiation of RSF1010 DNA replication. With the binding assay of RepC and mutated iterons in vitro, we found that the formation of a productive RepC-iteron complex was required for the initiation of plasmid DNA replication.

Specific nicking-closing activity of the initiator of replication protein RepB of plasmid pMV158 on supercoiled or single-stranded DNA

Asymmetric rolling circle replication of the promiscuous replicon pMV158 is initiated by the plasmid-encoded RepB protein. In vitro, purified RepB protein introduces a nick within the leading strand origin of replication by a nucleophylic attack on the phosphodiester bond at the dinucleotide GpA. Some changes within and around this dinucleotide were recognized by the protein. RepB nicked and closed supercoiled pMV158 DNA, having an optimum activity at 60 degrees C. We have imitated, in vitro, a process of rolling circle replication, since RepB was able to nick (initiation) and to covalently close (termination) single-stranded oligonucleotides containing the protein cleavage sequence. Covalent DNA-protein complexes were not found, indicating that RepB has unique features among plasmid-encoded proteins involved in rolling-circle replication or conjugative mobilization.