The Agaricus bisporus hypA gene encodes a hydrophobin and specifically accumulates in peel tissue of mushroom caps during fruit body development

Identification of Key Regulatory Pathways of Basidiocarp Formation in Pleurotus spp. Using Modeling, Simulation and System Biology Studies

Pleurotus (Oyster mushroom) is an important cultivated edible mushroom across the world. It has several therapeutic effects as it contains various useful bio-molecules. The cultivation and crop management of these basidiomycete fungi depends on many extrinsic and intrinsic factors such as substrate composition, growing environment, enzymatic properties, and the genetic makeup, etc. Moreover, for efficient crop production, a comprehensive understanding of the fundamental properties viz. intrinsic–extrinsic factors and genotype-environment interaction analysis is required. The present study explores the basidiocarp formation biology in Pleurotus mushroom using an in silico response to the environmental factors and involvement of the major regulatory genes. The predictive model developed in this study indicates involvement of the key regulatory pathways in the pinhead to fruit body development process. Notably, the major regulatory pathways involved in the conversion of mycelium aggregation to pinhead formation and White Collar protein (PoWC1) binding flavin-chromophore (FAD) to activate respiratory enzymes. Overall, cell differentiation and higher expression of respiratory enzymes are the two important steps for basidiocarp formation. PoWC1 and pofst genes were participate in the structural changes process. Besides this, the PoWC1 gene is also involved in the respiratory requirement, while the OLYA6 gene is the triggering point of fruiting. The findings of the present study could be utilized to understand the detailed mechanism associated with the basidiocarp formation and to cultivate mushrooms at a sustainable level.

A review of the role of biosurfactants in the biodegradation of hydrophobic organopollutants: production, mode of action, biosynthesis and applications

The increasing influence of human activity and industrialization has adversely impacted the environment via pollution with organic contaminants, which are minimally soluble in water. These hydrophobic organopollutants may be present in sediment, water or biota and have created concern due to their toxic effects in mammals. The ability of microorganisms to degrade pollutants makes their use the most effective, inexpensive and ecofriendly method for environmental remediation. Microorganisms have the ability to produce natural surfactants (biosurfactants) that increase the bioavailability of hydrophobic organopollutants, which enables their use as carbon and energy sources. Due to microbial diversity in production, and the biodegradability, nontoxicity, stability and specific activity of the surfactants, the use of microbial surfactants has the potential to overcome problems associated with contamination by hydrophobic organopollutants.This review provides an overview of the current state of knowledge regarding microbial surfactant production, mode of action in the biodegradation of hydrophobic organopollutants and biosynthetic pathways as well as their applications using emergent strategy tools to remove organopollutants from the environment. It is also specified for the first time that biosurfactants are produced either as growth-associated products or secondary metabolites, and are produced in different amounts by a wide range of microorganisms.

Mycelium vs. Fruiting Bodies of Edible Fungi-A Comparison of Metabolites

Edible mushrooms are widely appreciated for their appealing flavours, low caloric values and high content of presumably health-protecting metabolites. Their long history of safe use together with the looming worldwide food crisis have revived the idea of generating meat analogues and protein isolates by the controlled fermentation of mycelia of these edible fungi as a dietary option. The occurrence of proteins, polysaccharides, smaller metabolites, metal ions and toxins in mycelia and fruiting bodies is compared among the three most popular species, Agaricus bisporus (button mushroom), Pleurotus ostreatus (oyster mushroom), Lentinus edodes (shiitake) and some closely related species. Large effects of substrate chemistry, strain, developmental stage and ecological interactions result in a wide variation of the concentrations of some metabolites in both mycelial cells and fruiting bodies. This is obviously a result of the high adaptation abilities required to survive in natural habitats. Fungal bioprocesses are decoupled from agricultural production and can be operated anytime, anywhere, and on any scale according to demand. It is concluded that fungal biomass, if produced under food-grade conditions and on an industrial scale, could provide a safe and nutritious meat substitute and protein isolates with a high biological value for future vegan foods.

Barrier properties of fungal fruit body skins, pileipelles, contribute to protection against water loss

The permeability of intact fungal fruit body skins (pileipelles) with respect to water and oxygen was determined for the first time. Methods that have been successfully applied to plant surfaces were used to study isolated pileipelles. Mechanically isolated skins from five genera of Basidiomycota (species of Amanita, Russula, Stropharia, Tapinella, and Tricholomopsis) were mounted between two compartments simulating the inner (fruit body) and the outer (aerial) space. Fluxes of water and oxygen across the skins were measured. Water loss via intact skins differed markedly from evaporation of water from a water surface. The skins reduced water loss by factors of 10 to 30, with permeability ranging from 2.8 to 9.8 × 10⁻⁴ ms⁻¹. Oxygen permeability was much lower and ranged from 0.8 to 6.0 × 10⁻⁶ ms⁻¹. Chloroform-extractable substances play a minor, but significant role as transport barrier during water permeance. Water and oxygen permeability were dependent on the humidity in the aerial compartment. Higher humidity in the air increased permeability and the hydration/water content of the skins. The ecological implications include impacts to fungal growth, sporulation and spore release.

Identification of hydrophobin genes and their physiological functions related to growth and development in Pleurotus ostreatus

Hydrophobins are small secreted proteins with important physiological functions and potential applications. Here, Pleurotus ostreatus hydrophobin genes were systematically analyzed: they were characterized, classified, and their expression profiles and gene functions were explored. In total, 40 P. ostreatus hydrophobin genes were found and showed genetic diversity, of which 15 were newly identified. The hydrophobin protein sequences were diverse but all contained eight cysteine residues with a conserved spacing pattern, and 33 of them were class I hydrophobins. The expression profile analyses showed that Vmh3 and Hydph20 were abundant in monokaryotic and dikaryotic mycelia, whereas Hydph17, Po.hyd16, Hydph8 were specifically expressed in monokaryotic mycelia and Po.hyd10 were specific in dikaryotic mycelia. Furthermore, Vmh3, Hydph20, Po.hyd7, and Po.hyd10 were abundant when dikaryotic mycelia cultivated on PDA, which are different from on substrate (Vmh2, Vmh3, Hydph7, Po.hyd3, Po.hyd7, Po.hyd9); Hydph12, POH1, and Po.hyd4 can be induced by natural light and cold stimulation during development from mycelia to primordia; Vmh3, FBH1, Hydph12, Po.hyd1-Po.hyd5, and Po.hyd8 were highly expressed in primordia and young fruiting bodies; Hydph12, Po.hyd1, Po.hyd4, and Po.hyd5 were specifically expressed in pilei. In addition, RNAi transformants of FBH1 exhibited slower growth rates and had fewer primordia and fruiting bodies, which suggests FBH1 affects the growth rate and primordia formation of P. ostreatus. Therefore, P. ostreatus hydrophobin genes belong to a large family and are temporally and spatially expressed to meet the developmental needs of mushroom.

Putative hydrophobins of black poplar mushroom (Agrocybe cylindracea)

Hydrophobin proteins were extracted from Agrocybe cylindracea mycelia, the culture media (potato dextrose broth, PDB), and fruiting bodies. The putative hydrophobins obtained showed approximate sizes ranging from 8.0 to 25.0 kDa, dependent on their source. Multiple hydrophobin protein bands were detected in fruiting bodies. The hydrophobin yielded from aerial mycelia, or fruiting bodies, was approximately 6 mg/g dried weight. The crude extracts were examined for their properties in regards to surface modification, emulsification, and surface activity. Coating of hydrophobic Teflon sheet with crude extract made the surface significantly hydrophilic, whereas exposure of glass surfaces to extracts resulted in enhanced hydrophobicity. Crude extracts from culture media of A. cylindracea displayed emulsifying activity when mixed with hexane and could significantly reduce the surface tension of 60% ethanol and deionised water. The putative hydrophobin protein band from culture media (9.6 kDa), as analysed using LC-MS/MS, contained an amino acid fragment structurally similar to class I hydrophobin proteins from Basidiomycetes.

A WD40 Protein Encoding Gene Fvcpc2 Positively Regulates Mushroom Development and Yield in Flammulina velutipes

Ascomycota and Basidiomycota are two closely related phyla and fungi in two phyla share some common morphological developmental process during fruiting body formation. In Neurospora crassa, the Gβ-like protein CPC-2 with a seven-WD40 repeat domain was previously reported. By transforming CPC-2 ortholog encoding genes, from 7 different fungal species across Ascomycota and Basidiomycota, into the cpc-2 deletion mutant of N. crassa, we demonstrate that all tested CPC-2 ortholog genes were able to complement the defects of the cpc-2 deletion mutant in sexual development, indicating that CPC-2 proteins from Ascomycota and Basidiomycota have the similar cellular function. Using Flammulina velutipes as a model system for mushroom species, the CPC-2 ortholog FvCPC2 was characterized. Fvcpc2 increased transcription during fruiting body development. Knockdown of Fvcpc2 by RNAi completely impaired fruiting body formation. In three Fvcpc2 knockdown mutants, transcriptional levels of genes encoding adenylate cyclase and protein kinase A catalytic subunit were significantly lower and colony growth became slower than wild type. The addition of cAMP or the PKA-activator 8-Bromo-cAMP into the medium restored the Fvcpc2 knockdown mutants to the wild-type colony growth phenotype, suggesting that the involvement of cAMP production in the regulatory mechanisms of FvCPC2. Knockdown of Fvcpc2 also weakened transcriptional responses to sexual development induction by some genes related to fruiting body development, including 4 jacalin-related lectin encoding genes, 4 hydrophobin encoding genes, and 3 functionally-unknown genes, suggesting the participation of these genes in the mechanisms by which FvCPC2 regulates fruiting body development. All three Fvcpc2 overexpression strains displayed increased mushroom yield and shortened cultivation time compared to wild type, suggesting that Fvcpc2 can be a promising reference gene for Winter Mushroom breeding. Since the orthologs of FvCPC2 were highly conserved and specifically expressed during fruiting body development in different edible mushrooms, genes encoding FvCPC2 orthologs in other mushroom species also have potential application in breeding.

Structure Formation in Class I and Class II Hydrophobins at the Air-Water Interface under Multiple Compression/Expansion Cycles

Hydrophobins are small amphiphilic fungal proteins empirically divided into two classes. We investigated the self-assembled structures of class I SC3 from S. commune and class II HFBII from T. reesei transferred to mica from the air-water interface by using the Langmuir-Schaefer (LS) technique and atomic force microscopy (AFM). The main focus is the influence of areal constraint and multiple compressions and expansions on the morphology of the protein films. SC3 shows a rather homogenous coverage of the mica surface, with fibrillary structures. Multiple compressions to a surface pressure of 13 mn m^-1 led to a shortening of the fibrils. HFBII exhibits multilayered structures of varying thickness at higher surface pressures. Multiple compressions led to a variety of large, multilayer aggregates. Several compressions and expansions homogenized the films of both types. Both proteins showed similar dendritic structures with relevant length scales of at least several hundred nanometers at pressures of 13 mn m^-1 and above, although the primary structures they assemble into are usually different in size and type, and range from fibrils to hexagonally ordered films. These dendritic structures may stem from a combination of mechanical influences, such as compressions, expansions, and the drying effect during LS transfer, which may simulate processes during physiological applications of hydrophobins, such as encapsulation or release of spores.

Element distribution in fruiting bodies of Lactarius pubescens with focus on rare earth elements

During growth and senescence, fungal fruiting bodies accumulate essential and non-essential elements to different extent in their compartments. This study bases on a dataset of 32 basidiocarps of the ectomycorrhizal Lactarius pubescens sampled in a former U mining area. Statistical analyses were combined with rare earth element (REE, La-Lu) patterns to study the element distribution within sporocarp compartments and between three different age classes. For this purpose, fruiting bodies were separated into stipe, pileus trama, pileipelles and lamellae, dried and digested with HNO₃. While macronutrient (e.g. K, Mg, P, S) contents resemble those of a non-mining affected site, several elements (e.g. Co, Mn) were site-specifically taken up relative to elevated soil contents. With statistics, two main element distribution groups for L. pubescens were revealed: mainly essential (Cu, Mg, Mn, P, S, Zn, Cd, Co, Ni) and mainly non-essential elements (Al, Ca, Fe, Sr, U, REE). The highest REE contents were found in pileipelles and lamellae, corresponding to relatively small cell sizes. Stipes and pileus trama had low REE contents due to their function as transport systems. During growth, light REE (La-Nd) were strongly enriched in lamellae and pileipelles. Middle REE (Sm-Dy) enrichment was found both in soil and fungal biomass. Contents of nutrients decrease with age, while non-essential elements are enriched especially in pileipelles and lamellae. A weak positive Ce anomaly appeared in the bioavailable soil fraction and in the pileipelles of younger individuals. Substrate dependent uptake thus gets reduced with sporocarp senescence, possibly due to redistribution.

Comparative genomics and expression levels of hydrophobins from eight mycorrhizal genomes

Hydrophobins are small secreted proteins that are present as several gene copies in most fungal genomes. Their properties are now well understood: they are amphiphilic and assemble at hydrophilic/hydrophobic interfaces. However, their physiological functions remain largely unexplored, especially within mycorrhizal fungi. In this study, we identified hydrophobin genes and analysed their distribution in eight mycorrhizal genomes. We then measured their expression levels in three different biological conditions (mycorrhizal tissue vs. free-living mycelium, organic vs. mineral growth medium and aerial vs. submerged growth). Results confirmed that the size of the hydrophobin repertoire increased in the terminal orders of the fungal evolutionary tree. Reconciliation analysis predicted that in 41% of the cases, hydrophobins evolved from duplication events. Whatever the treatment and the fungal species, the pattern of expression of hydrophobins followed a reciprocal function, with one gene much more expressed than others from the same repertoire. These most-expressed hydrophobin genes were also among the most expressed of the whole genome, which suggests that they play a role as structural proteins. The fine-tuning of the expression of hydrophobin genes in each condition appeared complex because it differed considerably between species, in a way that could not be explained by simple ecological traits. Hydrophobin gene regulation in mycorrhizal tissue as compared with free-living mycelium, however, was significantly associated with a calculated high exposure of hydrophilic residues.

The good, the bad and the tasty: The many roles of mushrooms

Fungi are often inconspicuous in nature and this means it is all too easy to overlook their importance. Often referred to as the "Forgotten Kingdom", fungi are key components of life on this planet. The phylum Basidiomycota, considered to contain the most complex and evolutionarily advanced members of this Kingdom, includes some of the most iconic fungal species such as the gilled mushrooms, puffballs and bracket fungi. Basidiomycetes inhabit a wide range of ecological niches, carrying out vital ecosystem roles, particularly in carbon cycling and as symbiotic partners with a range of other organisms. Specifically in the context of human use, the basidiomycetes are a highly valuable food source and are increasingly medicinally important. In this review, seven main categories, or 'roles', for basidiomycetes have been suggested by the authors: as model species, edible species, toxic species, medicinal basidiomycetes, symbionts, decomposers and pathogens, and two species have been chosen as representatives of each category. Although this is in no way an exhaustive discussion of the importance of basidiomycetes, this review aims to give a broad overview of the importance of these organisms, exploring the various ways they can be exploited to the benefit of human society.

The Diverse Structures and Functions of Surfactant Proteins

Surface tension at liquid–air interfaces is a major barrier that needs to be surmounted by a wide range of organisms; surfactant and interfacially active proteins have evolved for this purpose. Although these proteins are essential for a variety of biological processes, our understanding of how they elicit their function has been limited. However, with the recent determination of high-resolution 3D structures of several examples, we have gained insight into the distinct shapes and mechanisms that have evolved to confer interfacial activity. It is now a matter of harnessing this information, and these systems, for biotechnological purposes.

Interfacially active proteins fulfill a wide range of biological functions in organisms ranging from bacteria and fungi to mammals.

Their physicochemical properties make interfacially active proteins attractive for biotechnological applications; for example, as coatings on nanodevices or medical implants and as emulsifiers in food and personal-care products.

High-resolution 3D structures show that the mechanisms by which interfacially active proteins achieve their function are highly diverse.

Strand-Specific RNA-Seq Analyses of Fruiting Body Development in Coprinopsis cinerea

The basidiomycete fungus Coprinopsis cinerea is an important model system for multicellular development. Fruiting bodies of C. cinerea are typical mushrooms, which can be produced synchronously on defined media in the laboratory. To investigate the transcriptome in detail during fruiting body development, high-throughput sequencing (RNA-seq) was performed using cDNA libraries strand-specifically constructed from 13 points (stages/tissues) with two biological replicates. The reads were aligned to 14,245 predicted transcripts, and counted for forward and reverse transcripts. Differentially expressed genes (DEGs) between two adjacent points and between vegetative mycelium and each point were detected by Tag Count Comparison (TCC). To validate RNA-seq data, expression levels of selected genes were compared using RPKM values in RNA-seq data and qRT-PCR data, and DEGs detected in microarray data were examined in MA plots of RNA-seq data by TCC. We discuss events deduced from GO analysis of DEGs. In addition, we uncovered both transcription factor candidates and antisense transcripts that are likely to be involved in developmental regulation for fruiting.

Isolation of Genes Specifically Expressed in the Fruit Body of the Edible BasidiomyceteLentinula edodes

In order to isolate the genes expressed specifically and abundantly in the mature fruit body of Lentinula edodes, the cDNAs derived from the gill of the fruit body were compared with the cDNAs from the mycelia by differential screening. Consequently, six clones were identified as fruit-body-specific genes (fbg03, 08, 13, 14, 16, and 21). The deduced amino acid sequence of fbg14 (Le.cypfb) had significant homology with the cytochrome P450 protein. The transcriptional level of fbg16, which showed 29.9% identity with the riboflavin aldehyde-forming enzyme of Agaricus bisporus, was highest among all of the fbg clones. This result indicates that the promoter region of fbg16 may become a powerful candidate for the expression signal of the vector for the gene manipulation in the mature fruit body.

Monitoring the metabolic state of fungal hyphae and the presence of melanin by nonlinear spectral imaging

Label-free nonlinear spectral imaging microscopy (NLSM) records two-photon-excited fluorescence emission spectra of endogenous fluorophores within the specimen. Here, NLSM is introduced as a novel, minimally invasive method to analyze the metabolic state of fungal hyphae by monitoring the autofluorescence of NAD(P)H and flavin adenine dinucleotide (FAD). Moreover, the presence of melanin was analyzed by NLSM. NAD(P)H, FAD, and melanin were used as biomarkers for freshness of mushrooms of Agaricus bisporus (white button mushroom) that had been stored at 4°C for 0 to 17 days. During this period, the mushrooms did not show changes in morphology or color detectable by eye. In contrast, FAD/NAD(P)H and melanin/NAD(P)H ratios increased over time. For instance, these ratios increased from 0.92 to 2.02 and from 0.76 to 1.53, respectively, at the surface of mushroom caps that had been harvested by cutting the stem. These ratios were lower under the skin than at the surface of fresh mushrooms (0.78 versus 0.92 and 0.41 versus 0.76, respectively), indicative of higher metabolism and lower pigment formation within the fruiting body. Signals were different not only between tissues of the mushroom but also between neighboring hyphae. These data show that NLSM can be used to determine the freshness of mushrooms and to monitor the postharvest browning process at an early stage. Moreover, these data demonstrate the potential of NLSM to address a broad range of fundamental and applied microbiological processes.

Environmental regulation of reproductive phase change in Agaricus bisporus by 1-octen-3-ol, temperature and CO₂

Reproductive phase change from vegetative mycelium to the initiation of fruiting in Agaricus bisporus is regulated in large part by the sensing of environmental conditions. A model is proposed in which three separate environmental factors exert control at different stages of the reproductive developmental process change. The eight carbon volatile 1-octen-3-ol controls the early differentiation from vegetative hyphae to multicellular knots; temperature reduction is essential for the later differentiation of primodia; and carbon dioxide level exerts quantitative control on the number of fruiting bodies developed. Analysis of transcriptomic changes during the reproductive phase change was carried out with initiation-specific microarrays, and the newly published A. bisporus genome was used to analyse the promoter regions of differentially regulated genes. Our studies have shown there to be both early and late initiation responses relating to sensing of eight carbon volatiles and temperature respectively. A subset of 45 genes was transcriptionally regulated during the reproductive phase change which exhibited a range of functions including cell structure, nitrogen and carbon metabolism, and sensing and signalling. Three gene clusters linking increased transcription with developmental stage were identified. Analysis of promoter regions revealed cluster-specific conserved motifs indicative of co-ordinated regulation of transcription.

Genome sequence of the button mushroom Agaricus bisporus reveals mechanisms governing adaptation to a humic-rich ecological niche

Agaricus bisporus is the model fungus for the adaptation, persistence, and growth in the humic-rich leaf-litter environment. Aside from its ecological role, A. bisporus has been an important component of the human diet for over 200 y and worldwide cultivation of the "button mushroom" forms a multibillion dollar industry. We present two A. bisporus genomes, their gene repertoires and transcript profiles on compost and during mushroom formation. The genomes encode a full repertoire of polysaccharide-degrading enzymes similar to that of wood-decayers. Comparative transcriptomics of mycelium grown on defined medium, casing-soil, and compost revealed genes encoding enzymes involved in xylan, cellulose, pectin, and protein degradation are more highly expressed in compost. The striking expansion of heme-thiolate peroxidases and β-etherases is distinctive from Agaricomycotina wood-decayers and suggests a broad attack on decaying lignin and related metabolites found in humic acid-rich environment. Similarly, up-regulation of these genes together with a lignolytic manganese peroxidase, multiple copper radical oxidases, and cytochrome P450s is consistent with challenges posed by complex humic-rich substrates. The gene repertoire and expression of hydrolytic enzymes in A. bisporus is substantially different from the taxonomically related ectomycorrhizal symbiont Laccaria bicolor. A common promoter motif was also identified in genes very highly expressed in humic-rich substrates. These observations reveal genetic and enzymatic mechanisms governing adaptation to the humic-rich ecological niche formed during plant degradation, further defining the critical role such fungi contribute to soil structure and carbon sequestration in terrestrial ecosystems. Genome sequence will expedite mushroom breeding for improved agronomic characteristics.

Long-distance translocation of protein during morphogenesis of the fruiting body in the filamentous fungus, Agaricus bisporus

Commercial cultivation of the mushroom fungus, Agaricus bisporus, utilizes a substrate consisting of a lower layer of compost and upper layer of peat. Typically, the two layers are seeded with individual mycelial inoculants representing a single genotype of A. bisporus. Studies aimed at examining the potential of this fungal species as a heterologous protein expression system have revealed unexpected contributions of the mycelial inoculants in the morphogenesis of the fruiting body. These contributions were elucidated using a dual-inoculant method whereby the two layers were differientially inoculated with transgenic β-glucuronidase (GUS) and wild-type (WT) lines. Surprisingly, use of a transgenic GUS line in the lower substrate and a WT line in the upper substrate yielded fruiting bodies expressing GUS activity while lacking the GUS transgene. Results of PCR and RT-PCR analyses for the GUS transgene and RNA transcript, respectively, suggested translocation of the GUS protein from the transgenic mycelium colonizing the lower layer into the fruiting body that developed exclusively from WT mycelium colonizing the upper layer. Effective translocation of the GUS protein depended on the use of a transgenic line in the lower layer in which the GUS gene was controlled by a vegetative mycelium-active promoter (laccase 2 and β-actin), rather than a fruiting body-active promoter (hydrophobin A). GUS-expressing fruiting bodies lacking the GUS gene had a bonafide WT genotype, confirmed by the absence of stably inherited GUS and hygromycin phosphotransferase selectable marker activities in their derived basidiospores and mycelial tissue cultures. Differientially inoculating the two substrate layers with individual lines carrying the GUS gene controlled by different tissue-preferred promoters resulted in up to a ∼3.5-fold increase in GUS activity over that obtained with a single inoculant. Our findings support the existence of a previously undescribed phenomenon of long-distance protein translocation in A. bisporus that has potential application in recombinant protein expression and biotechnological approaches for crop improvement.

An expanded genetic linkage map of an intervarietal Agaricus bisporus var. bisporusxA. bisporus var. burnettii hybrid based on AFLP, SSR and CAPS markers sheds light on the recombination behaviour of the species

A genetic linkage map for the edible basidiomycete Agaricus bisporus was constructed from 118 haploid homokaryons derived from an intervarietal A. bisporus var. bisporus x A. bisporus var. burnettii hybrid. Two hundred and thirty-one AFLP, 21 SSR, 68 CAPS markers together with the MAT, BSN, PPC1 loci and one allozyme locus (ADH) were evenly spread over 13 linkage groups corresponding to the chromosomes of A. bisporus. The map covers 1156cM, with an average marker spacing of 3.9cM and encompasses nearly the whole genome. The average number of crossovers per chromosome per individual is 0.86. Normal recombination over the entire genome occurs in the heterothallic variety, burnettii, contrary to the homothallic variety, bisporus, which showed adaptive genome-wide suppressed recombination. This first comprehensive genetic linkage map for A. bisporus provides foundations for quantitative trait analyses and breeding programme monitoring, as well as genome organisation studies.

Gene expression studies of the dikaryotic mycelium and primordium of Lentinula edodes by serial analysis of gene expression

Lentinula edodes (Shiitake mushroom) is a common edible mushroom that has high nutritional and medical value. Although a number of genes involved in the fruit of the species have been identified, little is known about the process of differentiation from dikaryotic mycelium to primordium. In this study, serial analysis of gene expression (SAGE) was applied to determine the gene expression profiles of the dikaryotic mycelium and primordium of L. edodes in an effort to advance our understanding of the molecular basis of fruit body development. A total of 6363 tags were extracted (3278 from the dikaryotic mycelium and 3085 from the primordium), 164 unique tags matched the in-house expressed sequence tag (EST) database. The difference between the expression profiles of the dikaryotic mycelium and primordium suggests that a specific set of genes is required for fruit body development. In the transition from the mycelium to the primordium, different hydrophobins were expressed abundantly, fewer structural genes were expressed, transcription and translation became active, different genes became involved in intracellular trafficking, and stress responses were expressed. These findings advance our understanding of fruit body development. We used cDNA microarray hybridization and Northern blotting to verify the SAGE results, and found SAGE to be highly efficient in the performance of transcriptome analysis. To our knowledge, this is the first SAGE study of a mushroom.

Characterization of aPleurotus ostreatus fruiting body-specific hydrophobin gene,Po.hyd

Hydrophobins are a family of small, moderately hydrophobic proteins with eight cysteine residues arranged in a conserved pattern. A full-length cDNA, designated Po.hyd, corresponding to a hydrophobin gene of Pleurotus ostreatus was obtained in our previous work. The Po.hyd gene contains a 333 bp open reading frame (ORF), which is interrupted by two typical classI introns. There was no consensus signal for a polyA tail detected in the 3'untranslated region. However, an analogous T- or TG-rich motif was observed that probably influence the formation of the mRNA 3' end. We assign the putative Po.HYD protein to the classI hydrophobins since its sequence arrangement and hydropathy pattern has a high consensus to other known class I hydrophobins. Northern analysis showed that the Po.hyd gene was abundantly expressed throughout the fruiting process (from primordium to mature fruiting body) but silenced during vegetative growth of the mycelium. Southern blot analysis showed Po.hyd to be a single copy gene in the genome of dikaryotic strain likely to locate at the same locus within the two parental genomes.

The role of ornithine aminotransferase in fruiting body formation of the mushroom Agaricus bisporus

The complete oat gene and cDNA from the commercial mushroom, Agaricus bisporus, encoding ornithine aminotransferase (OAT) was characterized. The gene encodes a 466 amino acid protein and provides the first fully reported homobasidiomycete OAT protein sequence. The gene is interrupted by ten introns, and no mitochondrial targeting motif was present pointing to a cytoplasmic localization. The function of the gene was demonstrated by complementation of a Saccharomyces cerevisiae mutant unable to utilize ornithine as a sole source of nitrogen with an A. bisporus oat cDNA construct. Northern analysis of the oat gene together with the pruA gene (encoding Delta(1)-pyrroline-5-carboxylate dehydrogenase) showed that transcripts of both genes were lower during the first stages of fruiting body development. The higher expression of the oat gene in later stages of development, suggests the importance of ornithine metabolism for the redistribution of metabolites in the developing mushroom. Hplc analysis of all amino acids revealed that ornithine levels increased during fruiting body development whereas proline levels fell.

Hydrophobins: proteins with potential

Hydrophobins are self-assembling proteins of fungal origin. Their ability to self-assemble into an amphipathic membrane is of interest for many different applications, ranging from medical and technical coatings to the production of proteinaceous glue and cosmetics. Assembled hydrophobins can modify surface characteristics, thus controling the binding properties of the surface; for example, enzymes can be actively and non-covalently immobilized on electrode surfaces and medical coatings can be improved for biocompatibility. Over the past few years research on hydrophobins has contributed to a better understanding of the self-assembly process and is generating more handles to control and manipulate the process. This knowledge could have an immediate effect on production levels, which are not yet adequate, and provide the boost needed for hydrophobins to reach their full potential.

Argininosuccinate synthetase and argininosuccinate lyase: two ornithine cycle enzymes from Agaricus bisporus

Accumulation of high quantities of urea in fruiting bodies is a known feature of larger basidiomycetes. Argininosuccinate synthetase (ASS) and argininosuccinate lyase (ASL) are two ornithine cycle enzymes catalysing the last two steps in the arginine biosynthetic pathway. Arginine is the main precursor for urea formation. In this work the nucleotide sequences of the genes and corresponding cDNAs encoding argininosuccinate synthetase (ass) and argininosuccinate lyase (asl) from Agaricus bisporus were determined. Eight and six introns were present in the ass and asl gene, respectively. The location of four introns in the asl gene were conserved among vertebrate asl genes. Deduced amino acid sequences, representing the first homobasidiomycete ASS and ASL protein sequences, were analysed and compared with their counterparts in other organisms. The ass ORF encoded for a protein of 425 amino acids with a calculated molecular mass of 47266Da. An alignment with ASS proteins from other organisms revealed high similarity with fungal and mammalian ASS proteins, 61-63% and 51-55% identity, respectively. The asl open reading frame (ORF) encoded a protein of 464 amino acids with an calculated mass of 52337Da and similar to ASS shared the highest similarity with fungal ASL proteins, 59-60% identity. Northern analyses of ass and asl during fruiting body formation and post-harvest development revealed that expression was significantly up-regulated from developmental stage 3 on for all the tissues studied. The expression reached a maximum at the later stages of fruiting body growth, stages 6 and 7. Both ass and asl genes were up-regulated within 3h after harvest showing that the induction mechanism is very sensitive to the harvest event and emphasizes the importance of the arginine biosynthetic pathway/ornithine cycle in post-harvest physiology.

Expression of the urease gene of Agaricus bisporus: a tool for studying fruit body formation and post-harvest development

Fruit body initials of Agaricus bisporus contain high levels of urea, which decrease in the following developmental stages until stage 4 (harvest) when urea levels increase again. At storage, the high urea content may affect the quality of the mushroom, i.e. by the formation of ammonia from urea through the action of urease (EC 3.5.1.5). Despite the abundance of urea in the edible mushroom A. bisporus, little is known about its physiological role. The urease gene of A. bisporus and its promoter region were identified and cloned. The coding part of the genomic DNA was interrupted by nine introns as confirmed by cDNA analysis. The first full homobasidiomycete urease protein sequence obtained comprised 838 amino acids (molecular mass 90,694 Da, pI 5.8). An alignment with fungal, plant and bacterial ureases revealed a high conservation. The expression of the urease gene, measured by Northern analyses, was studied both during normal development of fruit bodies and during post-harvest senescence. Expression in normal development was significantly up-regulated in developmental stages 5 and 6. During post-harvest senescence, the expression of urease was mainly observed in the stipe tissue; expression decreased on the first day and remained at a basal level through the remaining sampling period.

Hydrophobins: the protein-amphiphiles of filamentous fungi

Hydrophobins are surface active proteins produced by filamentous fungi. They have a role in fungal growth as structural components and in the interaction of fungi with their environment. They have, for example, been found to be important for aerial growth, and for the attachment of fungi to solid supports. Hydrophobins also render fungal structures, such as spores, hydrophobic. The biophysical properties of the isolated proteins are remarkable, such as strong adhesion, high surface activity and the formation of various self-assembled structures. The first high resolution three dimensional structure of a hydrophobin, HFBII from Trichoderma reesei, was recently solved. In this review, the properties of hydrophobins are analyzed in light of these new data. Various application possibilities are also discussed.

Efficient GFP expression in the mushrooms Agaricus bisporus and Coprinus cinereus requires introns

We have developed a "Molecular Toolkit" comprising interchangeable promoters and marker genes to facilitate transformation of homobasidiomycete mushrooms. We describe the evaluation of a range of promoters in the homobasidiomycetes Agaricus bisporus and Coprinus cinereus using green fluorescent protein (GFP) as a reporter gene; the C. cinereus trp1 promoter and A. bisporus trp2 and gpdII promoters proving successful in driving expression in C. cinereus, with the gpdII promoter also functioning in A. bisporus. Our investigations demonstrate that a prerequisite for GFP expression in C. cinereus and A. bisporus is the presence of an intron. This is the first reported expression of GFP in either C. cinereus or A. bisporus.

The ornithine cycle enzyme arginase from Agaricus bisporus and its role in urea accumulation in fruit bodies

An extensive survey of higher fungi revealed that members of the family Agaricaceae, including Agaricus bisporus, accumulate substantial amounts of urea in their fruit bodies. An important role of the ornithine cycle enzymes in urea accumulation has been proposed. In this work, we present the cloning and sequencing of the arginase gene and its promoter region from A. bisporus. A PCR-probe based on fungal arginase was used to identify the A. bisporus arginase gene from a cDNA library. The arginase cDNA encodes a 311-aa protein which is most likely expressed in the cytosol. Expression of the cDNA in Escherichia coli was established as a His-tagged fusion protein. The arginase gene was used as a molecular marker to study expression and regulation during sporophore formation and postharvest development. The expression of the arginase gene was significantly up-regulated from developmental stage 3 onwards for all the tissues studied. A maximum of expression was reached at stage 6 for both stipe and cap tissue. In postharvest stages 5, 6 and 7 the level of expression observed was similar to normal growth stages 5, 6 and 7. A good correlation was found between arginase expression and urea content of stipe, velum, gills, cap and peel tissue. For all tissues the urea content decreased over the first four stages of development. From stage 4 onwards urea accumulated again except for stipe tissue where no significant changes were observed. The same trend was also observed for postharvest development, but the observed increase of urea in postharvest tissues was much higher.

Cloning and characterization of a gene coding for a hydrophobin, Fv-hyd1, specifically expressed during fruiting body development in the basidiomycete Flammulina velutipes

Hydrophobin cDNA (fv-hyd1), which is specifically expressed during fruiting body development, was isolated from the basidiomycete Flammulina velutipes by differential display screening. Analysis of the genomic structure of fv-hyd1 revealed an open reading frame (ORF) composed of 363 nucleotides and interrupted by three introns. The deduced amino acid sequence of FV-HYD1 showed a similarity to those of other fungal class I hydrophobins and contained eight cysteine residues highly conserved among hydrophobin proteins. The pattern of the hydropathy plot of FV-HYD1 was similar to those of class I hydrophobins. Southern blot analysis of genomic DNA showed that fv-hyd1 existed as a single copy. Northern blot analysis indicated that the fv-hyd1 transcript was not present in vegetative mycelia but markedly increased in level at the primordial stage. Moreover, the fv-hyd1 transcript was abundant even at the mature fruiting body stage. This result indicates that fv-hyd1 could encode a hydrophobin closely associated with fruiting body development.

Distribution of hydrophobin 1 gene transcript in developing fruiting bodies of Lentinula edodes

Results of in situ RNA-RNA hybridization showed the presence of transcripts of the Lentinula edodes hydrophobin 1 gene, Le.hyd1, everywhere in the mycelial tissues of developing fruiting bodies except for the top parts of the pileus (cap) and for the prehymenophore. A high level of the transcript was detected in the parts surrounding the prehymenophore.

Differentially regulated, vegetative-mycelium-specific hydrophobins of the edible basidiomycete Pleurotus ostreatus

Three different hydrophobins (Vmh1, Vmh2, and Vmh3) were isolated from monokaryotic and dikaryotic vegetative cultures of the edible fungus Pleurotus ostreatus. Their corresponding genes have a number of introns different from those of other P. ostreatus hydrophobins previously described. Two genes (vmh1 and vmh2) were expressed only at the vegetative stage, whereas vmh3 expression was also found in the fruit bodies. Furthermore, the expression of the three hydrophobins varied significantly with culture time and nutritional conditions. The three genes were mapped in the genomic linkage map of P. ostreatus, and evidence is presented for the allelic nature of vmh2 and POH3 and for the different locations of the genes coding for the glycosylated hydrophobins Vmh3 and POH2. The glycosylated nature of Vmh3 and its expression during vegetative growth and in fruit bodies suggest that it should play a role in development similar to that proposed for SC3 in Schizophyllum commune.

Surface modifications created by using engineered hydrophobins

Hydrophobins are small (ca. 100 amino acids) secreted fungal proteins that are characterized by the presence of eight conserved cysteine residues and by a typical hydropathy pattern. Class I hydrophobins self-assemble at hydrophilic-hydrophobic interfaces into highly insoluble amphipathic membranes, thereby changing the nature of surfaces. Hydrophobic surfaces become hydrophilic, while hydrophilic surfaces become hydrophobic. To see whether surface properties of assembled hydrophobins can be changed, 25 N-terminal residues of the mature SC3 hydrophobin were deleted (TrSC3). In addition, the cell-binding domain of fibronectin (RGD) was fused to the N terminus of mature SC3 (RGD-SC3) and TrSC3 (RGD-TrSC3). Self-assembly and surface activity were not affected by these modifications. However, physiochemical properties at the hydrophilic side of the assembled hydrophobin did change. This was demonstrated by a change in wettability and by enhanced growth of fibroblasts on Teflon-coated with RGD-SC3, TrSC3, or RGD-TrSC3 compared to bare Teflon or Teflon coated with SC3. Thus, engineered hydrophobins can be used to functionalize surfaces.

Hydrophobins: multipurpose proteins

Class I and class II hydrophobins are small secreted fungal proteins that play a role in a broad range of processes in the growth and development of filamentous fungi. For instance, they are involved in the formation of aerial structures and in the attachment of hyphae to hydrophobic surfaces. The mechanisms by which hydrophobins fulfill these functions are based on their property to self-assemble at hydrophilic-hydrophobic interfaces into a 10 nm-thin highly amphipathic film. Complementation studies have shown that class I hydrophobins belong to a closely related group of morphogenetic proteins, but that they have evolved to function at specific interfaces. Recent evidence indicates that hydrophobins do not only function by self-assembly. Monomeric hydrophobin has been implicated in cell-wall assembly, but the underlying mechanism is not yet clear. In addition, hydrophobin monomers could act as toxins and elicitors.

The molecular genetics of cultivated mushrooms

The types, economic significance and methods of production of the principal cultivated mushrooms are described in outline. These organisms are all less than ideal for conventional genetic analysis and breeding, so molecular methods afford a particular opportunity to advance our understanding of their biology and potentially give the prospect of improvement by gene manipulation. The sequences described are limited to those found in GenBank by August 1999. The gene sequences isolated from the white button mushroom Agaricus bisporus, the shiitake Lentinula edodes, the oyster mushrooms Pleurotus spp., the paddy straw mushroom Volvariella volvacea and the enotake Flammulina velutipes are described. The largest group are genes from A. bisporus, which includes 29 for intracellular proteins and 12 for secreted proteins. In comparison, only a total of 26 sequences can be reported for the other cultivated species. A. bisporus is also the only cultivated species for which molecular karyotyping is already supported by reliable markers for all 13 of its chromosomes.