Membrane binding motif of the P-type cardiotoxin

Specific Amino Acid Residues in the Three Loops of Snake Cytotoxins Determine Their Membrane Activity and Provide a Rationale for a New Classification of These Toxins

Cytotoxins (CTs) are three-finger membrane-active toxins present mainly in cobra venom. Our analysis of the available CT amino acid sequences, literature data on their membrane activity, and conformational equilibria in aqueous solution and detergent micelles allowed us to identify specific amino acid residues which interfere with CT incorporation into membranes. They include Pro9, Ser28, and Asn/Asp45 within the N-terminal, central, and C-terminal loops, respectively. There is a hierarchy in the effect of these residues on membrane activity: Pro9 > Ser28 > Asn/Asp45. Taking into account all the possible combinations of special residues, we propose to divide CTs into eight groups. Group 1 includes toxins containing all of the above residues. Their representatives demonstrated the lowest membrane activity. Group 8 combines CTs that lack these residues. For the toxins from this group, the greatest membrane activity was observed. We predict that when solely membrane activity determines the cytotoxic effects, the activity of CTs from a group with a higher number should exceed that of CTs from a group with a lower number. This classification is supported by the available data on the cytotoxicity and membranotropic properties of CTs. We hypothesize that the special amino acid residues within the loops of the CT molecule may indicate their involvement in the interaction with non-lipid targets.

Membrane-Disrupting Activity of Cobra Cytotoxins Is Determined by Configuration of the N-Terminal Loop

In aqueous solutions, cobra cytotoxins (CTX), three-finger folded proteins, exhibit conformational equilibrium between conformers with either cis or trans peptide bonds in the N-terminal loop (loop-I). The equilibrium is shifted to the cis form in toxins with a pair of adjacent Pro residues in this loop. It is known that CTX with a single Pro residue in loop-I and a cis peptide bond do not interact with lipid membranes. Thus, if a cis peptide bond is present in loop-I, as in a Pro-Pro containing CTX, this should weaken its lipid interactions and likely cytotoxic activities. To test this, we have isolated seven CTX from Naja naja and N. haje cobra venoms. Antibacterial and cytotoxic activities of these CTX, as well as their capability to induce calcein leakage from phospholipid liposomes, were evaluated. We have found that CTX with a Pro-Pro peptide bond indeed exhibit attenuated membrane-perturbing activity in model membranes and lower cytotoxic/antibacterial activity compared to their counterparts with a single Pro residue in loop-I.

The myth of cobra venom cytotoxin: More than just direct cytolytic actions

Cobra venom cytotoxin (CTX) is a non-enzymatic three-finger toxin that constitutes 40-60% of cobra venom. Thus, it plays an important role in the pathophysiology of cobra envenomation, especially in local dermonecrosis. The three-finger hydrophobic loops of CTX determine the cytotoxicity. Nevertheless, the actual mechanisms of cytotoxicity are not fully elucidated as they involve not only cytolytic actions but also intracellular signalling-mediated cell death pathways. Furthermore, the possible transition cell death pattern remains to be explored. The actual molecular mechanisms require further studies to unveil the relationship between different CTXs from different cobra species and cell types which may result in differential cell death patterns. Here, we discuss the biophysical interaction of CTX with the cell membrane involving four binding modes: electrostatic interaction, hydrophobic partitioning, isotropic phase, and oligomerisation. Oligomerisation of CTX causes pore formation in the membrane lipid bilayer. Additionally, the CTX-induced apoptotic pathway can be executed via death receptor-mediated extrinsic pathways and mitochondrial-mediated intrinsic pathways. We also discuss lysosomal-mediated necrosis and the occurrence of necroptosis following CTX action. Collectively, we provided an insight into concentration-dependent transition of cell death pattern which involves different mechanistic actions. This contributes a new direction for further investigation of cytotoxic pathways activated by the CTXs for future development of biotherapeutics targeting pathological effects caused by CTX.

Variability in the Spatial Structure of the Central Loop in Cobra Cytotoxins Revealed by X-ray Analysis and Molecular Modeling

Cobra cytotoxins (CTs) belong to the three-fingered protein family and possess membrane activity. Here, we studied cytotoxin 13 from Naja naja cobra venom (CT13Nn). For the first time, a spatial model of CT13Nn with both “water” and “membrane” conformations of the central loop (loop-2) were determined by X-ray crystallography. The “water” conformation of the loop was frequently observed. It was similar to the structure of loop-2 of numerous CTs, determined by either NMR spectroscopy in aqueous solution, or the X-ray method. The “membrane” conformation is rare one and, to date has only been observed by NMR for a single cytotoxin 1 from N. oxiana (CT1No) in detergent micelle. Both CT13Nn and CT1No are S-type CTs. Membrane-binding of these CTs probably involves an additional step—the conformational transformation of the loop-2. To confirm this suggestion, we conducted molecular dynamics simulations of both CT1No and CT13Nn in the Highly Mimetic Membrane Model of palmitoiloleoylphosphatidylglycerol, starting with their “water” NMR models. We found that the both toxins transform their “water” conformation of loop-2 into the “membrane” one during the insertion process. This supports the hypothesis that the S-type CTs, unlike their P-type counterparts, require conformational adaptation of loop-2 during interaction with lipid membranes.

The omega-loop of cobra cytotoxins tolerates multiple amino acid substitutions

Cobra cytotoxins (CTs), the three-fingered proteins, feature high amino acid sequence homology in the beta-strands and variations in the loop regions. We selected a pair of cytotoxins from Naja kaouthia crude venom to clarify the sequence-structure relationships. Using chromatography and mass spectroscopy, we separated and identified the mixture of cytotoxins 2 and 3, differentiated by the only Val 41/Ala 41 substitution. Here, using natural abundance ¹³C, ¹⁵N NMR-spectroscopy we performed chemical shift assignments of the signals of the both toxins in aqueous solution in the major and minor forms. Combining NOE and chemical shift data, the toxins' spatial structure was determined. Finally, we proved that the tip of the "finger"-2, or the loop-2 of cytotoxins adopts the shape of an omega-loop with a tightly-bound water molecule in its cavity. Comparison with other NMR and X-ray structures of cytotoxins possessing different amino acid sequences reveals spatial similarity in this family of proteins, including the loop-2 region, previously considered to be flexible.

Stepwise Insertion of Cobra Cardiotoxin CT2 into a Lipid Bilayer Occurs as an Interplay of Protein and Membrane "Dynamic Molecular Portraits"

For many peripheral membrane-binding polypeptides(MBPs), especially β-structural ones, the precise molecular mechanisms of membrane insertion remain unclear. In most cases, only the terminal water-soluble and membrane-bound states have been elucidated, whereas potential functionally important intermediate stages are still not understood in sufficient detail. In this study, we present one of the first successful attempts to describe step-by-step embedding of the MBP cardiotoxin 2 (CT2) from cobra Naja oxiana venom into a lipid bilayer at the atomistic level. CT2 possesses a highly conservative and rigid β-structured three-finger fold shared by many other exogenous and endogenous proteins performing a wide variety of functions. The incorporation of CT2 into the lipid bilayer was analyzed via a 2 μs all-atom molecular dynamics (MD) simulation without restraints. This process was shown to occur over a number of distinct steps, while the geometry of initial membrane attachment drastically differs from that of the final equilibrated state. In the latter one, the hydrophobic platform ("bottom") formed by the tips of the three loops is deeply buried into the lipid bilayer. This agrees well with the NMR data obtained earlier for CT2 in detergent micelles. However, the bottom is too bulky to insert itself into the membrane at once. Instead, the gradual immersion of CT2 initiated by the loop-1 was observed. This initial binding stage was also demonstrated in a series of MD runs with varying starting orientations of the toxin with respect to the bilayer surface. Apart from the nonspecific long-range electrostatic attraction and hydrophobic match/mismatch factor, several specific lipid-binding sites were identified in CT2. They were shown to promote membrane insertion by engaging in strong interactions with lipid head groups, fine-tuning the toxin-membrane accommodation. We therefore propose that the toxin insertion relies on the interplay of nonspecific and specific interactions, which are determined by the "dynamic molecular portraits" of the two players, the protein and the membrane. The proposed model does not require protein oligomerization for membrane insertion and can be further employed to design MBPs with predetermined properties with regard to particular membrane targets.

The role of hydrophobic /hydrophilic balance in the activity of structurally flexible vs. rigid cytolytic polypeptides and analogs developed on their basis

INTRODUCTION

Being important representatives of various proteomes, membrane-active cationic peptides (CPs) are attractive objects as lead compounds in the design of new antibacterial, anticancer, antifungal, and antiviral molecules. Numerous CPs are found in insect and snake venoms, where many of them reveal cytolytic properties. Due to advances in omics technologies, the number of such peptides is growing dramatically. Areas covered: To understand structure-function relationships for CPs in a living cell, detailed analysis of their hydrophobic/hydrophilic properties is indispensable. We consider two structural classes of membrane-active CPs: latarcins (Ltc) from spider and cardiotoxins (CTXs) from snake venoms. While the former are void off disulfide bonds and conformationally flexible, the latter are structurally rigid and cross-linked with disulfide bonds. In order to elucidate structure-activity relationships behind their antibacterial, anticancer, and hemolytic effects, the properties of these polypeptides are considered on a side-by-side basis. Expert commentary: An ever-increasing number of venom-derived membrane-active polypeptides require new methods for identification of their functional propensities and sequence-based design of novel pharmacological substances. We address these issues considering a number of the designed peptides, based either on Ltc or CTX sequences. Experimental and computer modeling techniques required for these purposes are delineated.

Viperatoxin-II: A novel viper venom protein as an effective bactericidal agent

•

Two novel viperatoxins (VipTx-I and VipTx-II) from Indian Russell’s viper snake venom were purified and characterized.

•

VipTx-II but not VipTx-I showed strong antimicrobial effects against S. aureus and Burkholderia pseudomallei (strains KHW/TES), Proteus vulgaris and P. mirabilis.

•

In broth dilution assays, VipTx-II had a potent bactericidal effect at the lowest dilutions against B. pseudomallei (strains KHW/TES), S. aureus and P. mirabilis.

•

Protein-induced bactericidal potency was closely associated with pore formation and membrane damage.

•

These proteins showed a low level of cytotoxic effects on human cells.

Infections caused by methicillin-resistant Staphylococcus aureus (MRSA) have become a rising threat to public health. There is an urgent need for development of promising new therapeutic agents against drug resistant bacteria like S. aureus. This report discusses purification and characterization of proteins from Indian Russell’s viper snake venom. Novel 15-kDa proteins called “Viperatoxin” (VipTx-I and VipTx-II) were extracted from the whole venom and evaluated using in vitro antimicrobial experiments. The N-terminal amino acid sequence of “Viperatoxin” showed high sequence homology to daboiatoxin isolated from the same venom and also matched phospholipase A₂ (PLA₂) enzymes isolated from other snake venoms. In an in vitro plate assay, VipTx-II but not VipTx-I showed strong antimicrobial effects against S. aureus and Burkholderia pseudomallei (KHW & TES), Proteus vulgaris and P. mirabilis. The VipTx-II was further tested by a broth-dilution assay at 100–3.1 μg/ml concentrations. The most potent bactericidal effect was found at the lowest dilutions (MICs of 6.25 μg/ml) against B. pseudomallei, S. aureus and P. vulgaris (MICs of 12.25 μg/ml). Electron microscopic investigation revealed that the protein-induced bactericidal potency was closely associated with pore formation and membrane damage, even at the lowest concentrations (<20 μg/ml). The toxin caused a low level of cytotoxic effects as observed in human (THP-1) cells at higher concentrations. Molecular weight determinations of VipTx-II by sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed one major, along with a few minor bands. The results indicate that VipTx-II plays a significant role in bactericidal and membrane damaging effects in vitro. Non-cytotoxic properties on human cells highlight it as a promising candidate for further evaluation of antimicrobial potential in vivo.

Modeling Protein-Micelle Systems in Implicit Water

Several membrane proteins and numerous membrane-active peptides have been studied in detergent micelles by solution NMR. However, the detailed structure of these complexes remains unknown. We propose a modeling approach that treats the protein and detergent in atomistic detail and the solvent implicitly. The model is based on previous work on dodecylphosphocholine micelles, adapted for use with the CHARMM36 force field and extended to sodium dodecyl sulfate micelles. Solvation parameters were slightly adjusted to reproduce experimental data on aggregation numbers and critical micelle concentrations. To test the approach, several membrane-active peptides and three β-barrel membrane proteins were subjected to molecular dynamics simulations in the presence of a large number of detergent molecules. Their experimentally determined secondary structure was maintained and the RMSD values were less than 2 Å. Deformations were commonly observed in the N or C termini. The atomistic view of the protein-micelle systems that this approach provides could be useful in interpreting biophysical experiments carried out in the presence of detergent.

Identification and structural characterization of a new three-finger toxin hemachatoxin from Hemachatus haemachatus venom

Snake venoms are rich sources of biologically active proteins and polypeptides. Three-finger toxins are non-enzymatic proteins present in elapid (cobras, kraits, mambas and sea snakes) and colubrid venoms. These proteins contain four conserved disulfide bonds in the core to maintain the three-finger folds. Although all three-finger toxins have similar fold, their biological activities are different. A new three-finger toxin (hemachatoxin) was isolated from Hemachatus haemachatus (Ringhals cobra) venom. Its amino acid sequence was elucidated, and crystal structure was determined at 2.43 Å resolution. The overall fold is similar to other three-finger toxins. The structure and sequence analysis revealed that the fold is maintained by four highly conserved disulfide bonds. It exhibited highest similarity to particularly P-type cardiotoxins that are known to associate and perturb the membrane surface with their lipid binding sites. Also, the increased B value of hemachotoxin loop II suggests that loop II is flexible and may remain flexible until its interaction with membrane phospholipids. Based on the analysis, we predict hemachatoxin to be cardiotoxic/cytotoxic and our future experiments will be directed to characterize the activity of hemachatoxin.

Novel lynx spider toxin shares common molecular architecture with defense peptides from frog skin

A unique 30-residue cationic peptide oxyopinin 4a (Oxt 4a) was identified in the venom of the lynx spider Oxyopes takobius (Oxyopidae). Oxt 4a contains a single N-terminally located disulfide bond, Cys4-Cys10, and is structurally different from any spider toxin studied so far. According to NMR findings, the peptide is disordered in water, but assumes a peculiar torpedo-like structure in detergent micelles. It features a C-terminal amphipathic α-helical segment (body; residues 12-25) and an N-terminal disulfide-stabilized loop (head; residues 1-11), and has an unusually high density of positive charge in the head region. Synthetic Oxt 4a was produced and shown to possess strong and broad-spectrum cytolytic and antimicrobial activity. cDNA cloning showed that the peptide is synthesized in the form of a conventional prepropeptide with an acidic prosequence. Unlike other arachnid toxins, Oxt 4a exhibits striking similarity with defense peptides from the skin of ranid frogs that contain the so-called Rana-box motif (a C-terminal disulfide-enclosed loop). Parallelism or convergence is apparent on several levels: the structure, function and biosynthesis of a lynx spider toxin are mirrored by those of Rana-box peptides from frogs.

Snake cytotoxins bind to membranes via interactions with phosphatidylserine head groups of lipids

The major representatives of Elapidae snake venom, cytotoxins (CTs), share similar three-fingered fold and exert diverse range of biological activities against various cell types. CT-induced cell death starts from the membrane recognition process, whose molecular details remain unclear. It is known, however, that the presence of anionic lipids in cell membranes is one of the important factors determining CT-membrane binding. In this work, we therefore investigated specific interactions between one of the most abundant of such lipids, phosphatidylserine (PS), and CT 4 of Naja kaouthia using a combined, experimental and modeling, approach. It was shown that incorporation of PS into zwitterionic liposomes greatly increased the membrane-damaging activity of CT 4 measured by the release of the liposome-entrapped calcein fluorescent dye. The CT-induced leakage rate depends on the PS concentration with a maximum at approximately 20% PS. Interestingly, the effects observed for PS were much more pronounced than those measured for another anionic lipid, sulfatide. To delineate the potential PS binding sites on CT 4 and estimate their relative affinities, a series of computer simulations was performed for the systems containing the head group of PS and different spatial models of CT 4 in aqueous solution and in an implicit membrane. This was done using an original hybrid computational protocol implementing docking, Monte Carlo and molecular dynamics simulations. As a result, at least three putative PS-binding sites with different affinities to PS molecule were delineated. Being located in different parts of the CT molecule, these anion-binding sites can potentially facilitate and modulate the multi-step process of the toxin insertion into lipid bilayers. This feature together with the diverse binding affinities of the sites to a wide variety of anionic targets on the membrane surface appears to be functionally meaningful and may adjust CT action against different types of cells.

Amino Acid Features of P1B-ATPase Heavy Metal Transporters Enabling Small Numbers of Organisms to Cope with Heavy Metal Pollution

Phytoremediation refers to the use of plants for extraction and detoxification of pollutants, providing a new and powerful weapon against a polluted environment. In some plants, such as Thlaspi spp, heavy metal ATPases are involved in overall metal ion homeostasis and hyperaccumulation. P1B-ATPases pump a wide range of cations, especially heavy metals, across membranes against their electrochemical gradients. Determination of the protein characteristics of P1B-ATPases in hyperaccumulator plants provides a new opportuntity for engineering of phytoremediating plants. In this study, using diverse weighting and modeling approaches, 2644 protein characteristics of primary, secondary, and tertiary structures of P1B-ATPases in hyperaccumulator and nonhyperaccumulator plants were extracted and compared to identify differences between proteins in hyperaccumulator and nonhyperaccumulator pumps. Although the protein characteristics were variable in their weighting, tree and rule induction models; glycine count, frequency of glutamine-valine, and valine-phenylalanine count were the most important attributes highlighted by 10, five, and four models, respectively. In addition, a precise model was built to discriminate P1B-ATPases in different organisms based on their structural protein features. Moreover, reliable models for prediction of the hyperaccumulating activity of unknown P1B-ATPase pumps were developed. Uncovering important structural features of hyperaccumulator pumps in this study has provided the knowledge required for future modification and engineering of these pumps by techniques such as site-directed mutagenesis.

Mixed-SAM surfaces monitoring CTX-protein part I: Using atomic force microscope measurements

Fast and efficient detection of Cobra cardiotoxin (CTX) protein molecules on biochip surfaces is an example of application in biotechnology. One potential application of mixed self assembled monolayers (SAMs) as chip surfaces yield different binding affinities of the CTX proteins, a series of studies on the interaction force between CTX proteins and the mixed SAMs surfaces formed from mixtures of two thiols with the same/different chain lengths and/or with the same/different terminal groups will be investigated. In these dual papers, the mixed SAMs of n-alkinethiol SAMs of different chain lengths are chosen as the first examples of this series due to the simple functions of the mixed SAMs surface structure. Thus, the adhesion force measurements of CTX protein molecules on mixed SAMs of n-alkinethiol SAMs of different chain lengths: 1-decanethiol (C9) and 1-hexanethiol (C5) with different mixing ratios are developed and conducted using atomic force microscope (AFM). There are two major tasks in Part I of the dual papers: the development of the AFM measurements providing reliable information, and selection of the surface with highest binding affinity among this mixed SAMs group. Results indicate that the adhesion forces for CTX protein molecules on mixed SAMs with mixing ratio (χ(C9)) of 0.25, 0.5, 0.75 and 1, are 1.26, 1.8, 1.38, and 1.25 folds respectively, compared with the adhesion force of CTX protein molecules on the C5 surface only. Therefore, the SAM surfaces of χ(C9) = 0.5 is the best choice as a biomaterial sensor of this group of mixed SAMs because the strongest binding force and highest efficiency. Effects of the loading force of the AFM operation, the radius of curvature of the AFM tip, and the AFM tip endurance as well as control experiments were examined to ensure the quantitative determination of adhesion force for AFM measurement. The physical mechanism of protein adsorption on SAM surfaces will be studied and analyzed by molecular dynamics (MD) simulations and will be reported in Part II of the dual papers to compensate the limited information on the interaction taking place at atomic level that experiments cannot provide.

Despite a conserved cystine knot motif, different cyclotides have different membrane binding modes

Cyclotides are cyclic proteins produced by plants for defense against pests. Because of their remarkable stability and diverse bioactivities, they have a range of potential therapeutic applications. The bioactivities of cyclotides are believed to be mediated through membrane interactions. To determine the structural basis for the biological activity of the two major subfamilies of cyclotides, we determined the conformation and orientation of kalata B2 (kB2), a Möbius cyclotide, and cycloviolacin O2 (cO2), a bracelet cyclotide, bound to dodecylphosphocholine micelles, using NMR spectroscopy in the presence and absence of 5- and 16-doxylstearate relaxation probes. Analysis of binding curves using the Langmuir isotherm indicated that cO2 and kB2 have association constants of 7.0 x 10(3) M(-1) and 6.0 x 10(3) M(-1), respectively, consistent with the notion that they are bound near the surface, rather than buried deeply within the micelle. This suggestion is supported by the selective broadening of micelle-bound cyclotide NMR signals upon addition of paramagnetic Mn ions. The cyclotides from the different subfamilies exhibited clearly different binding orientations at the micelle surface. Structural analysis of cO2 confirmed that the main element of the secondary structure is a beta-hairpin centered in loop 5. A small helical turn is present in loop 3. Analysis of the surface profile of cO2 shows that a hydrophobic patch stretches over loops 2 and 3, in contrast to the hydrophobic patch of kB2, which predominantly involves loops 2 and 5. The different location of the hydrophobic patches in the two cyclotides explains their different binding orientations and provides an insight into the biological activities of cyclotides.

Combined X-ray and NMR analysis of the stability of the cyclotide cystine knot fold that underpins its insecticidal activity and potential use as a drug scaffold

Cyclotides are a family of plant defense proteins that are highly resistant to adverse chemical, thermal, and enzymatic treatment. Here, we present the first crystal structure of a cyclotide, varv F, from the European field pansy, Viola arvensis, determined at a resolution of 1.8 A. The solution state NMR structure was also determined and, combined with measurements of biophysical parameters for several cyclotides, provided an insight into the structural features that account for the remarkable stability of the cyclotide family. The x-ray data confirm the cystine knot topology and the circular backbone, and delineate a conserved network of hydrogen bonds that contribute to the stability of the cyclotide fold. The structural role of a highly conserved Glu residue that has been shown to regulate cyclotide function was also determined, verifying its involvement in a stabilizing hydrogen bond network. We also demonstrate that varv F binds to dodecylphosphocholine micelles, defining the binding orientation and showing that its structure remains unchanged upon binding, further demonstrating that the cyclotide fold is rigid. This study provides a biological insight into the mechanism by which cyclotides maintain their native activity in the unfavorable environment of predator insect guts. It also provides a structural basis for explaining how a cluster of residues important for bioactivity may be involved in self-association interactions in membranes. As well as being important for their bioactivity, the structural rigidity of cyclotides makes them very suitable as a stable template for peptide-based drug design.

Combined use of mass spectrometry and heterologous expression for identification of membrane-interacting peptides in cytochrome P450 46A1 and NADPH-cytochrome P450 oxidoreductase

Cytochrome P450 46A1 (CYP46A1) and NADPH-cytochrome P450 oxidoreductase (CPR) are the components of the brain microsomal mixed-function monooxygenase system that catalyzes the conversion of cholesterol to 24-hydroxycholesterol. Both CYP46A1 and CPR are monotopic membrane proteins that are anchored to the endoplasmic reticulum via the N-terminal transmembrane domain. The exact mode of peripheral association of CYP46A1 and CPR with the membrane is unknown. Therefore, we studied their membrane topology by using an approach in which solution-exposed portion of heterologously expressed membrane-bound CYP46A1 or CPR was removed by digestion with either trypsin or chymotrypsin followed by extraction of the residual peptides and their identification by mass spectrometry. The identified putative membrane-interacting peptides were mapped onto available crystal structures of CYP46A1 and CPR and the proteins were positioned in the membrane considering spatial location of the missed cleavage sites located within these peptide as well as the flanking residues whose cleavage produced these peptides. Experiments were then carried out to validate the inference from our studies that the substrate, cholesterol, enters CYP46A1 from the membrane. As for CPR, its putative membrane topology indicates that the Q153R and R316W missense mutations found in patients with disordered steroidogenesis are located within the membrane-associated regions. This information may provide insight in the deleterious nature of these mutations.

Divalent cation coordination and mode of membrane interaction in cyclotides: NMR spatial structure of ternary complex Kalata B7/Mn2+/DPC micelle

The cyclotides are the family of hydrophobic bioactive plant peptides, characterized by a circular protein backbone and three knot forming disulfide bonds. It is believed that membrane activity of the cyclotides underlines their antimicrobial, cytotoxic and hemolytic properties, but the specific interactions with divalent cations can be also involved. To assess the mode of membrane interaction and divalent cation coordination in cyclotides, the spatial structure of the Möbius cyclotide Kalata B7 from the African perennial plant Oldenlandia affinis was determined in the presence of anisotropic membrane mimetic (dodecylphosphocholine micelles). The model of peptide/cation/micelle complex was built using 5-doxylstearate and Mn2+ relaxation probes. Results show that the peptide binds to the micelle surface with relatively high affinity by two hydrophobic loops (loop 2 - Thr6-Leu7 and loop 5 - Trp19-Ile21). The partially hydrated divalent cation is coordinated by charged side-chain of Glu3, aromatic side chain of Tyr11 and free carbonyls of Thr4 and Thr9, and is located in direct contact with the polar head-groups of detergent. The comparison with data about other cyclotides indicates that divalent cation coordination is the invariant property of all cyclotides, but the mode of peptide/membrane interactions is varied. Probably, the specific cation/peptide interactions play a major, but yet not known, role in the biological activity of the cyclotides.

Antioxidants: promising neuroprotection against cardiotoxin-4b-induced cell death which triggers oxidative stress with early calpain activation

Cardiotoxin-4b (CTX-4b), isolated from Naja naja sputatrix venom, shows lethality in several cell types. Employing murine primary cortical neurons, this study was undertaken to investigate the molecular mechanisms of CTX-4b in the induction of neuronal death. CTX-4b induced a dose- and time-dependent neuronal death. Strong induction of calpains as early as 4h post-CTX-4b 75 nM treatment was detected in neurons with negligible caspase 3 activation. For the first time in cultured murine primary cortical neurons, it was noted that CTX-4b-mediated cell death triggered oxidative stress with an increase in reactive oxygen species (ROS) levels, and that application of antioxidants showed effective attenuation of cell death. Taken together, these results indicate that CTX-4b-mediated neuronal death is associated with (i) early calpain activation and (ii) oxidative stress. Most importantly, antioxidants have proved to be a promising therapeutic avenue against CTX-4b-induced neuronal death.

The role of hydrophobic interactions in positioning of peripheral proteins in membranes

BACKGROUND

Three-dimensional (3D) structures of numerous peripheral membrane proteins have been determined. Biological activity, stability, and conformations of these proteins depend on their spatial positions with respect to the lipid bilayer. However, these positions are usually undetermined.

RESULTS

We report the first large-scale computational study of monotopic/peripheral proteins with known 3D structures. The optimal translational and rotational positions of 476 proteins are determined by minimizing energy of protein transfer from water to the lipid bilayer, which is approximated by a hydrocarbon slab with a decadiene-like polarity and interfacial regions characterized by water-permeation profiles. Predicted membrane-binding sites, protein tilt angles and membrane penetration depths are consistent with spin-labeling, chemical modification, fluorescence, NMR, mutagenesis, and other experimental studies of 53 peripheral proteins and peptides. Experimental membrane binding affinities of peripheral proteins were reproduced in cases that did not involve a helix-coil transition, specific binding of lipids, or a predominantly electrostatic association. Coordinates of all examined peripheral proteins and peptides with the calculated hydrophobic membrane boundaries, subcellular localization, topology, structural classification, and experimental references are available through the Orientations of Proteins in Membranes (OPM) database.

CONCLUSION

Positions of diverse peripheral proteins and peptides in the lipid bilayer can be accurately predicted using their 3D structures that represent a proper membrane-bound conformation and oligomeric state, and have membrane binding elements present. The success of the implicit solvation model suggests that hydrophobic interactions are usually sufficient to determine the spatial position of a protein in the membrane, even when electrostatic interactions or specific binding of lipids are substantial. Our results demonstrate that most peripheral proteins not only interact with the membrane surface, but penetrate through the interfacial region and reach the hydrocarbon interior, which is consistent with published experimental studies.

Conformation and mode of membrane interaction in cyclotides. Spatial structure of kalata B1 bound to a dodecylphosphocholine micelle

Cyclotides are a family of bioactive plant peptides that are characterized by a circular protein backbone and three conserved tightly packed disulfide bonds. The antimicrobial and hemolytic properties of cyclotides, along with the relative hydrophobicity of the peptides, point to the biological membrane as a target for cyclotides. To assess the membrane-induced conformation and orientation of cyclotides, the interaction of the Möbius cyclotide, kalata B1, from the African perennial plant Oldenlandia affinis, with dodecylphosphocholine micelles was studied using NMR spectroscopy. Under conditions where the cyclotide formed a well-defined complex with micelles, the spatial structure of kalata B1 was calculated from NOE and J couplings data, and the model for the peptide-micelle complex was built using 5- and 16-doxylstearate relaxation probes. The binding of divalent cations to the peptide-micelle complex was quantified by Mn2+ titration. The results show that the peptide binds to the micelle surface, with relatively high affinity, via two hydrophobic loops (loop 5, Trp19-Val21; and loop6, Leu27-Val29). The charged residues (Glu3 and Arg24), along with the cation-binding site (near Glu3) are segregated on the other side of the molecule and in contact with polar head groups of detergent. The spatial structure of kalata B1 is only slightly changed during incorporation into micelles and represents a distorted triple-stranded beta-sheet cross-linked by a cystine knot. Detailed structural analysis and comparison with other knottins revealed structural conservation of the two-disulfide motif in cyclic and acyclic peptides. The results thus obtained provide the first model for interaction of cyclotides with membranes and permit consideration of the cyclotides as membrane-active cationic antimicrobial peptides.

Spatial Structure and Activity Mechanism of a Novel Spider Antimicrobial Peptide,

Latarcins (Ltc), linear peptides (ca. 25 amino acid long) isolated from the venom of the Lachesana tarabaevi spider, exhibit a broad-spectrum antibacterial activity, most likely acting on the bacterial plasmatic membrane. We study the structure-activity relationships in the series of these compounds. At the first stage, we investigated the spatial structure of one of the peptides, Ltc2a, and its mode of membrane perturbation. This was done by a combination of experimental and theoretical methods. The approach includes (i) structural study of the peptide by CD spectroscopy in phospholipid liposomes and by (1)H NMR in detergent micelles, (ii) determination of the effect on the liposomes by a dye leakage fluorescent assay and (31)P NMR spectroscopy, (iii) refinement of the NMR-derived spatial structure via Monte Carlo simulations in an implicit water-octanol slab, and (iv) calculation of the molecular hydrophobicity potential. The molecule of Ltc2a was found to consist of two helical regions (residues 3-9 and 13-21) connected via a poorly ordered fragment. The effect of the peptide on the liposomes suggests the carpet mechanism of the membrane deterioration. This is also supported by the analysis of hydrophobic/hydrophilic characteristics of Ltc2a and homologous antimicrobial peptides. These peptides exhibiting a helix-hinge-helix structural motif are characterized by a distinct and feebly marked amphiphilicity of their N- and C-terminal helices, respectively, and by a hydrophobicity gradient along the peptide chain. The approach we suggested may be useful in studying not only other latarcins but also a wider class of membrane-active peptides.

Implicit solvent simulations of peptide interactions with anionic lipid membranes

A recently developed implicit membrane model (IMM1) is supplemented with a Gouy-Chapman term describing counterion-screened electrostatic interactions of a solute with negatively charged membrane lipids. The new model is tested on peptides that bind to anionic membranes. Pentalysine binds just outside the plane of negative charge, whereas Lys-Phe peptides insert their aromatic rings into the hydrophobic core. Melittin and magainin 2 bind more strongly to anionic than to neutral membranes and in both cases insert their hydrophobic residues into the hydrocarbon core. The third domain of Antennapedia homeodomain (penetratin) binds as an alpha-helix in the headgroup region. Cardiotoxin II binds strongly to anionic membranes but marginally to neutral ones. In all cases, the location and configuration of the peptides are consistent with experimental data, and the effective energy changes upon binding compare favorably with experimental binding free energies. The model opens the way to exploring the effect of membrane charge on the location, conformation, and dynamics of a large variety of biologically active peptides on membranes.

Prediction of amphipathic in-plane membrane anchors in monotopic proteins using a SVM classifier

Background

Membrane proteins are estimated to represent about 25% of open reading frames in fully sequenced genomes. However, the experimental study of proteins remains difficult. Considerable efforts have thus been made to develop prediction methods. Most of these were conceived to detect transmembrane helices in polytopic proteins. Alternatively, a membrane protein can be monotopic and anchored via an amphipathic helix inserted in a parallel way to the membrane interface, so-called in-plane membrane (IPM) anchors. This type of membrane anchor is still poorly understood and no suitable prediction method is currently available.

Results

We report here the "AmphipaSeeK" method developed to predict IPM anchors. It uses a set of 21 reported examples of IPM anchored proteins. The method is based on a pattern recognition Support Vector Machine with a dedicated kernel.

Conclusion

AmphipaSeeK was shown to be highly specific, in contrast with classically used methods (e.g. hydrophobic moment). Additionally, it has been able to retrieve IPM anchors in naively tested sets of transmembrane proteins (e.g. PagP). AmphipaSeek and the list of the 21 IPM anchored proteins is available on NPS@, our protein sequence analysis server.

Molecular dynamics simulation of the enhancement of cobra cardiotoxin and E6 protein binding on mixed self-assembled monolayer molecules

Molecular dynamics simulations are performed on n-alkinethiol self-assembled monolayers (SAMs) and their mixture on a gold surface so that the orientations of the binding of cobra cardiotoxin and E6 protein molecules can be selected using the mixing ratio of CH3-terminated SAMs with different chain lengths. The simulations suggest that a SAM surface with different mixing ratios may provide a possible platform for aligning protein molecules with a desired orientation and for enhancing the binding energy of the protein on the designed surface.

Interaction of three-finger toxins with phospholipid membranes: comparison of S- and P-type cytotoxins

The CTs (cytotoxins) I and II are positively charged three-finger folded proteins from venom of Naja oxiana (the Central Asian cobra). They belong to S- and P-type respectively based on Ser-28 and Pro-30 residues within a putative phospholipid bilayer binding site. Previously, we investigated the interaction of CTII with multilamellar liposomes of dipalmitoylphosphatidylglycerol by wide-line (31)P-NMR spectroscopy. To compare interactions of these proteins with phospholipids, we investigated the interaction of CTI with the multilamellar liposomes of dipalmitoylphosphatidylglycerol analogously. The effect of CTI on the chemical shielding anisotropy and deformation of the liposomes in the magnetic field was determined at different temperatures and lipid/protein ratios. It was found that both the proteins do not affect lipid organization in the gel state. In the liquid crystalline state of the bilayer they disturb lipid packing. To get insight into the interactions of the toxins with membranes, Monte Carlo simulations of CTI and CTII in the presence of the bilayer membrane were performed. It was found that both the toxins penetrate into the bilayer with the tips of all the three loops. However, the free-energy gain on membrane insertion of CTI is smaller (by approximately 7 kcal/mol; 1 kcal identical with 4.184 kJ) when compared with CTII, because of the lower hydrophobicity of the membrane-binding site of CTI. These results clearly demonstrate that the P-type cytotoxins interact with membranes stronger than those of the S-type, although the mode of the membrane insertion is similar for both the types.

Structure, Assembly, and Topology of the G185R Mutant of the Fourth Transmembrane Domain of Divalent Metal Transporter

The mammalian iron transporter, divalent metal transporter (DMT1), is a 12-transmembrane domain integral protein, responsible for dietary iron uptake in the duodenum and iron acquisition from transferrin in peripheral tissues. Two disease-causing mutants in animals have been found and attributed to the same missense mutation (G185R), which occurs within the putative transmembrane domain 4 (TM4) of DMT1. We have characterized a synthetic 24-mer peptide, corresponding to the sequence of the TM4 of DMT1 with G185R mutation using circular dichroism (CD) and NMR spectroscopy and show that the G185R peptide assumes mainly alpha-helical conformations in various membrane-mimetic environments. Solution structures derived from NMR and molecular dynamics/simulated annealing calculations demonstrate that the peptide exhibits a highly defined alpha-helix in its middle portion, flanked by a highly flexible N-terminus and a relatively ordered C-terminus. Both the folding and location of the C-terminus in SDS micelles are regulated by pH values. Paramagnetic broadening on peptide NMR signals by spin-labeled 5- and 16-doxylstearic acids and Mn(2+) ion suggests that both the N-terminus and the helical region of the peptide are embedded in SDS micelles. Surprisingly, self-association of the peptides for both the wild type and the G185R mutant studied by CD, electrospray ionization mass spectrometry, and NMR diffusion-ordered spectroscopy demonstrated that mutation of the Gly185 to a bulky and positively charged arginine causes a different self-assembly of the peptide, e.g., from a trimer to a hexamer, which implies that the quaternary structure of integral DMT1 may be crucial for its function in vivo.

The first representative of glycosylated three-fingered toxins. Cytotoxin from the Naja kaouthia cobra venom

There are different glycosylated proteins in snake venoms, but no glycosylated representatives of a large family of three-fingered toxins have previously been detected. A new glycoprotein was isolated from the venom of the Thai cobra Naja kaouthia. MALDI MS of the glycoprotein contained an array of peaks in the range from approximately 8900 to approximately 9400 Da indicating its microheterogeneity. Carbohydrate analysis showed the presence of mannose, galactose, N-acetylglucosamine, fucose and neuraminic acid. The N-terminal sequence of the glycoprotein was identical to that of cytotoxin 3 (CX3) from N. kaouthia, and CD spectra of the glycoprotein and CX3 were almost the same. Cleavage of a glycan moiety by N-glycosidase F gave a protein of molecular mass practically coinciding with that of CX3. MALDI MS of the tryptic digest of reduced glycoprotein S-pyridylethylated at cysteine residues, contained peaks corresponding to all tryptic fragments of CX3, with the exception of fragment 24-30. The peak corresponding to this peptide appeared in the mass-spectrum of similarly treated deglycosylated glycoprotein. These data show that the potential N-glycosylation site at Asn29 in CX3 is utilized for glycan attachment and that the glycoprotein is glycosylated CX3. In vivo toxicity of the glycoprotein to the cricket Gryllus assimilis was twofold lower than that of CX3. The cytotoxic activity of the glycoprotein towards HL60 cells was about two orders of magnitude lower than that of CX3, but could be made equal to the CX3 cytotoxicity by deglycosylation. Thus for the first time we have isolated a glycosylated three-fingered snake venom toxin wherein glycosylation appears to modulate its biological activity.

Cardiotoxin-III selectively enhances activation-induced apoptosis of human CD8+ T lymphocytes

Cardiotoxin-III (CTX-III), a major cardiotoxin isolated from the venom of the Taiwan cobra (Naja naja atra), is a highly basic, hydrophobic, toxic protein, which can induce lysis of mononuclear cells by an unknown mechanism. This study was undertaken to investigate the effects of CTX-III on untreated and PHA-activated peripheral blood mononuclear cells (PBMCs) in vitro. The results show that treatment of PHA-activated lymphocytes with CTX-III (10 microg/ml) induced apoptosis and depletion of the CD8(+) population. In both untreated and PHA-treated lymphocytes, interferon-gamma production was dramatically reduced and interleukin-2 (IL-2) production was moderately reduced by CTX-III treatment. In PHA-activated lymphocytes, CD4 expression was increased, whereas CD8 and IL-2R beta chain (CD25) expression were decreased. In contrast, CTX-III had no effect on the viability of PHA-activated monocytes but significantly enhanced their tumor necrosis factor-alpha production. These results show that CTX-III selectively enhanced activation-induced apoptosis in CD8(+) T cells. CTX-III was found to bind to the cell membrane of PHA-stimulated PBMCs, and three CTX-III-binding proteins, with molecular weights of 92, 77, and 68 kDa, were identified. We therefore propose that CTX-III interacts with one or more cell surface proteins and initiates a signal pathway causing functional changes. These findings provide an insight into the immunomodulatory properties of CTX-III and suggest a novel method for the selective induction of apoptosis in CD8(+) T lymphocytes.

Peripheral binding mode and penetration depth of cobra cardiotoxin on phospholipid membranes as studied by a combined FTIR and computer simulation approach

Cobra cardiotoxin, a cytotoxic beta-sheet basic polypeptide, is known to cause membrane leakage in many cells including human erythrocytes. Herein, we demonstrate that the major cobra cardiotoxin from Naja atra, CTX A3, can cause leakage of vesicle contents in phosphatidylglycerol (PG) and phosphatidylserine containing, but not in pure phosphatidylcholine (PC), membrane bilayers. By the combined polarized attenuated total reflection infrared spectroscopy and computer simulation studies, CTX A3 is shown to peripherally bind to both zwitterionic and anionic monolayers in a similar edgewise manner with a tilted angle of approximately 48 +/- 20 degrees between the beta-sheet plane of the CTX molecule and the normal of the membrane surface. The average surface area expansion induced by CTX A3 binding to the PG monolayer, however, is two times larger than that of the PC monolayer as determined by the Langmuir minitrough method. Interaction energy considerations of CTX A3 on neutral and negatively charged membrane surfaces suggests that the electrostatic interaction between anionic lipid and cationic CTXs plays a role in modulating the penetration depth of CTX molecules on the initial peripheral binding mode and reveals a pathway leading to the formation of an inserted mode in negatively charged membrane bilayers.

Structural basis of membrane-induced cardiotoxin A3 oligomerization

Cobra cardiotoxins (CTXs) have previously been shown to induce membrane fusion of vesicles formed by phospholipids such as cardiolipin or sphingomyelin. CTX can also form a pore in membrane bilayers containing a anionic lipid such as phosphatidylserine or phosphatidylglycerol. Herein, we show that the interaction of CTX with negatively charged lipids causes CTX dimerization, an important intermediate for the eventual oligomerization of CTX during the CTX-induced fusion and pore formation process. The structural basis of the lipid-induced oligomerization of CTX A3, a major CTX from Naja atra, is then illustrated by the crystal structure of CTX A3 in complex with SDS; SDS likely mimics anionic lipids of the membrane under micelle conditions at 1.9-A resolution. The crystal packing reveals distinct SDS-free and SDS-rich regions; in the latter two types of interconnecting CTX A3 dimers, D1 and D2, and several SDS molecules can be identified to stabilize D1 and D2 by simultaneously interacting with residues at each dimer interface. When the three CTXSDS complexes in the asymmetric unit are overlaid, the orientation of CTX A3 monomers relative to the SDS molecules in the crystal is strikingly similar to that of the toxin with respect to model membranes as determined by NMR and Fourier transform infrared methods. These results not only illustrate how lipid-induced CTX dimer formation may be transformed into oligomers either as inverted micelles of fusion intermediates or as membrane pore of anionic lipid bilayers but also underscore a potential role for SDS in x-ray diffraction study of protein-membrane interactions in the future.

Interaction of the P-type cardiotoxin with phospholipid membranes

The cardiotoxin (cytotoxin II, or CTII) isolated from cobra snake (Naja oxiana) venom is a 60-residue basic membrane-active protein featuring three-finger beta sheet fold. To assess possible modes of CTII/membrane interaction 31P- and 1H-NMR spectroscopy was used to study binding of the toxin and its effect onto multilamellar vesicles (MLV) composed of either zwitterionic or anionic phospholipid, dipalmitoylglycerophosphocholine (Pam2Gro-PCho) or dipalmitoylglycerophosphoglycerol (Pam2Gro-PGro), respectively. The analysis of 1H-NMR linewidths of the toxin and 31P-NMR spectral lineshapes of the phospholipid as a function of temperature, lipid-to-protein ratios, and pH values showed that at least three distinct modes of CTII interaction with membranes exist: (a) nonpenetrating mode; in the gel state of the negatively charged MLV the toxin is bound to the surface electrostatically; the binding to Pam2Gro-PCho membranes was not observed; (b) penetrating mode; hydrophobic interactions develop due to penetration of the toxin into Pam2Gro-PGro membranes in the liquid-crystalline state; it is presumed that in this mode CTII is located at the membrane/water interface deepening the side-chains of hydrophobic residues at the tips of the loops 1-3 down to the boundary between the glycerol and acyl regions of the bilayer; (c) the penetrating mode gives way to isotropic phase, stoichiometrically well-defined CTII/phospholipid complexes at CTII/lipid ratio exceeding a threshold value which was found to depend at physiological pH values upon ionization of the imidazole ring of His31. Biological implications of the observed modes of the toxin-membrane interactions are discussed.

Cytotoxic potency of cardiotoxin from Naja sputatrix: development of a new cytolytic assay

The possible involvement of specific regions/loops of cardiotoxin from Naja sputatrix venom in mediating its cytolytic activity is evaluated using a new cytolytic assay. In this assay, the amount of chloramphenicol acetyltransferase (CAT) that is released upon lysis of the cellular membranes by the cytotoxin has been measured as an index of cytolysis. This newly developed CAT system is more sensitive than the traditional haemolysis method utilizing red blood cells or the lactate dehydrogenase assay for cytolysis. Series of chimaeric toxin molecules have been constructed by swapping the loops between highly hydrophilic neurotoxin and highly hydrophobic cardiotoxin molecules from Naja sputatrix, which are known to exhibit structural similarity (three-finger conformation) but to have different functional properties. Comparison of the cytolytic activities of the recombinant chimaeric toxins demonstrated the possible involvement of all three loops of cardiotoxin in its cytolytic potency. However, the first two loops of the protein appear to make the major contribution to its lytic activity. cDNAs encoding cardiotoxin and the chimaeric toxins, when expressed in transfected cultured Chinese hamster ovary cells, resulted in cell lysis, indicating that these cDNAs can be developed as useful cytolytic agents.

Interaction of cardiotoxins with membranes: a molecular modeling study

Incorporation of beta-sheet proteins into membrane is studied theoretically for the first time, and the results are validated by the direct experimental data. Using Monte Carlo simulations with implicit membrane, we explore spatial structure, energetics, polarity, and mode of insertion of two cardiotoxins with different membrane-destabilizing activity. Both proteins, classified as P- and S-type cardiotoxins, are found to retain the overall "three-finger" fold interacting with membrane core and lipid/water interface by the tips of the "fingers" (loops). The insertion critically depends upon the structure, hydrophobicity, and electrostatics of certain regions. The simulations reveal apparently distinct binding modes for S- and P-type cardiotoxins via the first loop or through all three loops, respectively. This rationalizes an earlier empirical classification of cardiotoxins into S- and P-type, and provides a basis for the analysis of experimental data on their membrane affinities. Accomplished with our previous simulations of membrane alpha-helices, the computational method may be used to study partitioning of proteins with diverse folds into lipid bilayers.

Spatial structure of zervamicin IIB bound to DPC micelles: implications for voltage-gating

Zervamicin IIB is a 16-amino acid peptaibol that forms voltage-dependent ion channels with multilevel conductance states in planar lipid bilayers and vesicular systems. The spatial structure of zervamicin IIB bound to dodecylphosphocholine micelles was studied by nuclear magnetic resonance spectroscopy. The set of 20 structures obtained has a bent helical conformation with a mean backbone root mean square deviation value of approximately 0.2 A and resembles the structure in isotropic solvents (Balashova et al., 2000. NMR structure of the channel-former zervamicin IIB in isotropic solvents. FEBS Lett 466:333-336). The N-terminus represents an alpha-helix, whereas the C-terminal part has a mixed 3(10)/alpha(R) hydrogen-bond pattern. In the anisotropic micelle environment, the bending angle on Hyp10 (23 degrees) is smaller than that (47 degrees) in isotropic solvents. In the NOESY (Nuclear Overhauser Effect Spectroscopy) spectra, the characteristic attenuation of the peptide signals by 5- and 16-doxylstearate relaxation probes indicates a peripheral mode of the peptaibol binding to the micelle with the N-terminus immersed slightly deeper into micelle interior. Analysis of the surface hydrophobicity reveals that the zervamicin IIB helix is amphiphilic and well suited to formation of a tetrameric transmembrane bundle, according to the barrel-stave mechanism. The results are discussed in a context of voltage-driven peptaibol insertion into membrane.

Heparin binding stabilizes the membrane-bound form of cobra cardiotoxin

It has been shown previously that the long chain fragments of heparin bind to the beta-strand cationic belt of the three-finger cobra cardiotoxin (or cytotoxin, CTX) and hence enhance its penetration into phospholipid monolayer under physiological ionic conditions. By taking lysophosphatidylcholine (LPC) micelles as a membrane model, we have shown by (1)H NMR study that the binding of heparin-derived hexasaccharide (Hep-6) to CTX at the beta-strand region can induce conformational changes of CTX near its membrane binding loops and promote the binding activity of CTX toward LPC. The Fourier-transform infrared spectra and NMR nuclear Overhauser effect of Hep-6.CTX and CTX.LPC complex in aqueous buffer also supplemented the aforementioned observation. Thus, the detected conformational change may presumably be the result of structural coupling between the connecting loops and its beta-strands. This is the first documentation of results showing how the association of hydrophilic carbohydrate molecules with amphiphilic proteins can promote hydrophobic protein-lipid interaction via the stabilization of its membrane-bound form. A similar mechanism involving tripartite interactions of heparin, protein, and lipid molecules may be operative near the extracellular matrix of cell membranes.

Dynamic characterization of the water binding loop in the P-type cardiotoxin: implication for the role of the bound water molecule

Recent studies of cobra P-type cardiotoxins (CTXs) have shown that the water-binding loop (loop II) plays a crucial role in toxin binding to biological membranes and in their cytotoxicity. To understand the role of bound water in the loop, the structure and dynamics of the major P-type CTX from Taiwan cobra, CTX A3, were determined by a comprehensive NMR analysis involving (1)H NOESY/ROESY, (13)C[1)H]NOE/T(1) relaxation, and (17)O triple-quantum filtered NMR. A single water molecule was found to be tightly hydrogen bonded to the NH of Met26 with a correlation time (5-7 ns) approaching the isotropic tumbling time (3.8-4.5 ns) of the CTX A3 molecule. Surprisingly, despite the relatively long residence time (ca. 5 ns to 100 micros), the bound water molecule of CTX A3 is located within a dynamic (order parameter S(2) approximately 0.7) and solvent accessible loop. Comparison among several P-type CTXs suggests that proline residues in the consensus sequence of MxAxPxVPV should play an important role in the formation of the water binding loop. It is proposed that the exchange rate of the bound water may play a role in regulating the lipid binding mode of amphiphilic CTX molecules near membrane surfaces.