Recent Developments in Ring-Opening Polymerization of Lactones

One-pot terpolymerization of CHO, CO2 and L-lactide using chloride indium catalysts

Ring-opening copolymerization reactions of epoxides, carbon dioxide and cyclic esters to produce copolymers is a promising strategy to prepare CO₂-based polymeric materials. In this contribution, bimetallic chloride indium complexes have been developed as catalysts for the copolymerization processes of cyclohexene oxide, carbon dioxide and L-lactide under mild reaction conditions. The catalysts displayed good catalytic activity and excellent selectivity towards the preparation of poly(cyclohexene carbonate) (PCHC) at one bar CO₂ pressure in the absence of a co-catalyst. Additionally, polyester-polycarbonate copolymers poly(lactide-co-cyclohexene carbonate) (PLA-co-PCHC) were obtained via an one-pot one-step route without the use of a co-catalyst. The degree of incorporation of carbon dioxide can be easily modulated by changing the CO₂ pressure and the monomer feed, resulting in copolymers with different thermal properties.

Raman Study of Block Copolymers of Methyl Ethylene Phosphate with Caprolactone and L-lactide

We present an in-depth analysis of Raman spectra of novel block copolymers of methyl ethylene phosphate (MeOEP) with caprolactone (CL) and L-lactide (LA), recorded with the excitation wavelengths of 532 and 785 nm. The experimental peak positions, relative intensities and profiles of the poly(methyl ethylene phosphate) (PMeOEP), polycaprolactone (PCL) and poly(L-lactide) (PLA) bands in the spectra of the copolymers and in the spectra of the PMeOEP, PCL and PLA homopolymers turn out to be very similar. This clearly indicates the similarity between the conformational and phase compositions of PMeOEP, PCL and PLA parts in molecules of the copolymers and in the PMeOEP, PCL and PLA homopolymers. Experimental ratios of the peak intensities of PMeOEP bands at 737 and 2963 cm^-1 and the PCL bands at 1109, 1724 and 2918 cm^-1 can be used for the estimation of the PCL-b-PMeOEP copolymers chemical composition. Even though only one sample of the PMeOEP-b-PLA copolymers was experimentally studied in this work, we assume that the ratios of the peak intensities of PLA bands at 402, 874 and 1768 cm^-1 and the PMeOEP band at 737 cm^-1 can be used to characterize the copolymer chemical composition.

Trinuclear zinc calix[4]arenes: synthesis, structure, and ring opening polymerization studies

The trinuclear zinc calix[4]arene complexes [Zn₃(O₂CCH₃)₂(L(O)₂(OMe)₂)₂·xMeCN (x = 7.5, 1; x = 6, 1'), [Zn₃(O₂CCH₃)₂(L(O)₂(OnPr)₂)₂·5MeCN (2·5MeCN), [Zn₃(OEt)₂(L(O)₂(OMe)₂)₂]·4MeCN (3·4MeCN), [Zn₃(OEt)₂(L(Opentyl)₂)₂]·4.5MeCN (4·4.5MeCN) and [Zn₃(OH)₂(L(O)₂(On-pentyl)₂]·8MeCN (5·8MeCN) have been isolated from reaction of [(ZnEt)₂(L(O)₂(OR)₂)₂] (L(OH)₂(OR)₂ = 1,3-dialkoxy-4-tert-butylcalix[4]arene; R = methyl, n-propyl or pentyl) and the reagents acetic acid, ethanol, and presumed adventitious water, respectively. Attempts to make 5via a controlled hydrolysis led only to the isolation of polymorphs of (L(OH)₂(Opentyl)₂·MeCN. Reaction of [Zn(C₆F₅)₂] with L(OH)₂(Opentyl)₂, in the presence of K₂CO₃, led to the isolation of the complex [Zn₆(L(On-pentyl))₂(OH)₃(C₆F₅)₃(NCMe)₃]·3MeCN (6·3MeCN). The molecular structures of 1-6 reveal they all contain a near linear (163 to 179°) Zn₃ motif. In 1-5, a central tetrahedral Zn centre is flanked by trigonal bipyramidal Zn centres, whilst in 6, for the linear Zn₃ unit, a central distorted octahedral zinc centre is flanked by trigonal planar and a tetrahedral zinc centres. Screening for the ring opening polymerization (ROP) of ε-caprolactone at 90 °C revealed that they are active with moderate to good conversion affording low to medium molecular weight products with at least two series of ions. For comparative studies, the trinuclear aminebis(phenolate) complex [Zn₃(Oi-Pr)₂L^/] (L^/ = n-propylamine-N,N-bis(2-methylene-4,6-di-tert-butylphenolate) I was prepared. Kinetics revealed the rate order I > 4 > 6 ≈ 2 ≈ 1 > 3.

Microwave-assisted in situ ring-opening polymerization of ε-caprolactone in the presence of modified halloysite nanotubes loaded with stannous chloride

Polycaprolactone (PCL) has been widely applied for its excellent physicochemical properties, but it also has common problems with biopolymers. It is important to investigate energy-efficient polymerization crafts and composite catalytic systems in the ring-opening polymerization (ROP) of ε-caprolactone (ε-CL) to prepare high-performance PCL matrix composites. In this study, a composite catalytic system of modified halloysite nanotubes loaded with stannous chloride (APTES-P-h-HNTs-SnCl₂) was successfully synthesized via hydroxylation, calcination, silane coupling agent modification and physical loading. It was used to catalyze the microwave-assisted in situ ROP of ε-CL to synthesize PCL matrix nanocomposites with modified halloysite nanotubes (PCL-HNTs). The structure, morphology, polymerization, thermal properties and electrochemical performance of products were subsequently investigated. The results show that PCL-HNTs have been successfully synthesized with connected petal-like and porous structures. Compared with PCL, the film-forming and thermal properties of PCL-HNTs have been significantly improved. Moreover, PCL-HNTs have a potential application value in the field of solid polymer electrolytes (SPEs).

For the composite catalyst, there existed synergetic catalytic effect between the hydroxyl groups and the metal center. All chain growth simultaneously proceeded between the layers or on the surface of HNTs, conducting the in situ ROP.

The versatile roles of neutral donor ligands in tuning catalyst performance for the ring-opening polymerization of cyclic esters

The use of neutral donor ligands is an effective strategy to modify catalyst structure and performance in the synthesis of sustainable polymers through the ring-opening polymerization (ROP) of cyclic esters.

Zinc 8-aminotrihydroquinolines appended with pendant N-diphenylphosphinoethyl arms as exceptionally active catalysts for the ROP of ε-CL

Through activation with LiCH2SiMe3 or LiN(SiMe3)2, zinc(ii) chloride complexes bearing 5,6,7-trihydroquinolin-8-amines appended with pendant diphenyl phosphine units displayed remarkable catalytic activity for ROP of ε-caprolactone.

From Impossible to Possible: Atom-Economic Polymerization of Low Strain Five-Membered Carbonates

The direct ring-opening polymerization (ROP) of propylene carbonate (PC) only affords oligomers with substantial unidentified by-products, which hinders the efficient utilization of PC. Through detailed studies, for the first time, a careful mechanism involving the in situ release of propylene oxide (PO) from PC decarboxylation is proposed. Further, we report a novel strategy of copolymerization of PC/cyclic anhydrides via in situ capture of the formed intermediates. Results show that PC is successfully transformed into polyesters. Especially for the ring-opening alternating copolymerization (ROAC) of PC/phthalic anhydride (PA), a variety of advantages are manifold: i) slow-release of PO ensuring a perfectly alternating structure; ii) quantitative and fast transformation of PC; iii) visualization of polymerization process by a CO₂ pressure gauge. Of importance, through tandem polymerizations, PC is fully transformed into polyesters and polycarbonates concurrently, thus achieving PC utilization with a high atom-economy.

Degradable Polymer Structures from Carbon Dioxide and Butadiene

The utilization of carbon dioxide as a polymer feedstock is an ongoing challenge. This report describes the catalytic conversion of carbon dioxide and an olefin comonomer, 1,3-butadiene, into a polymer structure that arises from divergent propagation mechanisms. Disubstituted unsaturated δ-valerolactone 1 (EVL) was homopolymerized by the bifunctional organocatalyst 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) to produce a hydrolytically degradable polymer. Isolation and characterization of reaction intermediates using ¹H, ¹³C, COSY, HSQC, and MS techniques revealed a vinylogous 1,4-conjugate addition dimer forms in addition to polymeric materials. Polymer number-average molecular weights up to 3760 g/mol and glass transition temperatures in the range of 25-52 °C were measured by GPC and DSC, respectively. The polymer microstructure was characterized by ¹H, ¹³C, FTIR, MALDI-TOF MS, and ESI tandem MS/MS. The olefin/CO₂-derived materials depolymerized by hydrolysis at 80 °C in 1 M NaOH. This method and the observed chemical structures expand the materials and properties that can be obtained from carbon dioxide and olefin feedstocks.

Towards Advances in Molecular Understanding of Boric Acid Biocatalyzed Ring-Opening (Co)Polymerization of δ-Valerolactone in the Presence of Ethylene Glycol as an Initiator

Following our previous studies on the molecular level structure of (co)oligoesters obtained via anionic homo- and co-polymerization of novel β-substituted β-lactones, prepared by the atmospheric pressure carbonylation reaction of respective epoxides, the boric acid biocatalyzed ring-opening (co)polymerization of δ-valerolactone has been studied. As a co-monomer the 6-methy-ε-caprolactone, prepared by the one-pot oxidation of respective alcohol, and ethylene glycol as polymerization initiator were used. The obtained copolymers were characterized by 1H-NMR, GPC and ESI-MS, respectively in order to confirm their chemical structures and identity. Subsequently, tandem mass spectrometry (MS-MS studies) via collision-induced dissociation were utilized to characterize the fragmentation pattern. ESI-MS and NMR analyses confirmed the formation of random linear copolymer chains composed of different polyester repeat units. MS-MS experiments showed that fragmentation proceeds via ester bound cleavage along the (co)polyester chains. The innovative aspect of this contribution is related to the elaboration of the telechelic (co)polymers end-capped with hydroxyl end groups and well-defined molecular architectures, which could facilitate the development of new flexible macromolecular systems for potential biomedical applications.

Recent Developments in Lactone Monomers and Polymer Synthesis and Application

Lactones are a group of compounds that have been known for several decades. The commercial importance of lactones results from the possibility of manufacturing of a broad scope of derivatives and polymers with a wide spectrum of applications. In this work the synthesis and characterization of simple lactones are described, which due to the easy methods of the synthesis are of high importance for the industry. The chemical as well as biochemical methods are included with special attention paid to the methods that avoid metal catalysts, initiators or toxic solvents, allowing the use of the final products for the medical applications, e.g., for controlled drug-release systems, resorbable surgical threads, implants, tissue scaffolds or for the production of drugs. Lactone-based derivatives, such as polymers, copolymers, composites or three-dimensional structures are also presented. The work is focused on the methods for the synthesis of lactones and lactones derivates, as well as on the special properties and application of the studied compounds.

Direct imidation of lactones via catalytic oxo/imido heterometathesis

We report the first examples of direct imidation of lactones giving the corresponding cyclic imidates via oxo/imido heterometathesis with N-sulfinylamines catalysed by a well-defined silica-supported Ti imido complex.

Functionalized Biodegradable Polymers via Termination of Ring-Opening Polymerization by Acyl Chlorides

Aliphatic polyesters are an important class of polymeric materials for biomedical applications due to their versatile and tunable chemistry, biocompatibility and biodegradability. A capability of direct bonding with biomedically significant molecules, provided by the presence of the reactive end functional groups (FGs), is highly desirable for prospective polymers. Among FGs, N-hydroxysuccinimidyl activated ester group (NHS) and maleimide fragment (MI) provide efficient covalent bonding with -NH- and -SH containing compounds. In our study, we found that NHS- and MI-derived acyl chlorides efficiently terminate living ring-opening polymerization of ε-caprolactone, L-lactide, ethyl ethylene phosphonate and ethyl ethylene phosphate, catalyzed by 2,6-di-tert-butyl-4-methylphenoxy magnesium complex, with a formation of NHS- and MI-functionalized polymers at a high yields. Reactivity of these polymers towards amine- and thiol-containing model substrates in organic and aqueous media was also studied.

Comparative Experimental and Theoretical Study of Mg, Al and Zn Aryloxy Complexes in Copolymerization of Cyclic Esters: The Role of the Metal Coordination in Formation of Random Copolymers

Homogeneity of copolymers is a general problem of catalytic coordination polymerization. In ring-opening polymerization of cyclic esters, the rational design of the catalyst is generally applied to solve this problem by the equalization of the reactivities of comonomers-however, it often leads to a reduction of catalytic activity. In the present paper, we studied the catalytic behavior of BnOH-activated complexes (ВНТ)Mg(THF)2nBu (1), (ВНТ)2AlMe (2) and [(ВНТ)ZnEt]2 (3), based on 2,6-di-tert-butyl-4-methylphenol (BHT-H) in homo- and copolymerization of L-lactide (lLA) and ε-caprolactone (εCL). Even at 1:5 lLA/εCL ratio Mg complex 1 catalyzed homopolymerization of lLA without involving εCL to the formation of the polymer backbone. On the contrary, Zn complex 3 efficiently catalyzed random lLA/εCL copolymerization; the presence of mono-lactate subunits in the copolymer chain clearly pointed to the transesterification mechanism of copolymer formation. Both epimerization and transesterification side processes were analyzed using the density functional theory (DFT) modeling that confirmed the qualitative difference in catalytic behavior of 1 and 3: Mg and Zn complexes demonstrated different types of preferable coordination on the PLA chain (k2 and k3, respectively) with the result that complex 3 catalyzed controlled εCL ROP/PLA transesterification, providing the formation of lLA/εCL copolymers that contain mono-lactate fragments separated by short oligo(εCL) chains. The best results in the synthesis of random lLA/εCL copolymers were obtained during experiments on transesterification of commercially available PLLA, the applicability of 3/BnOH catalyst in the synthesis of random copolymers of εCL with methyl glycolide, ethyl ethylene phosphonate and ethyl ethylene phosphate was also demonstrated.

Poly(4-ketovalerolactone) from Levulinic acid: Synthesis and Hydrolytic Degradation

We report here the synthesis of poly(4-ketovalerolactone) (PKVL) via ring-opening transesterification polymerization (ROTEP) of the monomer 4-ketovalerolactone (KVL, two steps from levulinic acid). The polymerization of KVL proceeds to high equilibrium monomer conversion (up to 96% in the melt) to give the semicrystalline polyketoester PKVL with low dispersity. PKVL displays glass transition temperatures of 7 °C and two melting temperatures at 132 and 148 °C. This polyester can be chemically recycled through hydrolytic degradation. Under aqueous neutral or acidic conditions, the dominating pathway for polyester hydrolysis is through backbiting from the chain end. Under basic conditions, mid-chain cleavage, accelerated by the ketone carbonyl group in the backbone, promotes the hydrolysis of nearby backbone ester bonds. The final hydrolysis product is 5-hydroxylevulinic acid, the ring opened hydrolysis product of KVL. PKVL was also observed to degrade under the action of a Brønsted acid to a bis-spirocyclic dilactone natural product altaicadispirolactone, which is a dimer of KVL. This constitutes a rare example of a one-step synthesis of a secondary metabolite of non-trivial structure in which a polymer was the starting material and the sole source of matter. Analogous ROTEP of the isomeric 4-membered lactone 4-acetyl-β-propiolactone (APL) was also explored, although this chemistry was not as well-behaved as the KVL to PKVL polymerization.

Synthesis of a mononuclear magnesium bis(alkoxide) complex and its reactivity in the ring-opening copolymerization of cyclic anhydrides with epoxides

Synthesis of a new mononuclear magnesium complex with a bulky bis(alkoxide) ligand environment and its reactivity in ring-opening polymerization (ROP) and ring-opening copolymerization (ROCOP) are reported. Reaction of n-butyl-sec-butylmagnesium with two equivalents of HOR (HOR = di-tert-butylphenylmethanol, HOCtBu2Ph) formed Mg(OR)2(THF)2. The reaction proceeded via the Mg(OR)(sec-Bu)(THF)2 intermediate that was independently synthesized by treating n-butyl-sec-butylmagnesium with one equivalent of HOR. Mg(OR)2(THF)2 led to active albeit not well-controlled ROP of rac-lactide. In contrast, well-controlled ROCOP of epoxides with cyclic anhydrides was observed, including efficient and alternating copolymerization of phthalic anhydride with cyclohexene oxide as well as rare copolymerization of phthalic anhydride with limonene oxide and terpolymerization of phthalic anhydride with both cyclohexene oxide and limonene oxide. In addition, novel copolymerization of dihydrocoumarin with limonene oxide is described.

Poly(hydroxy acids) derived from the self-condensation of hydroxy acids: from polymerization to end-of-life options

Poly(hydroxy acids) derived from the self-condensation of hydroxy acid are biodegradable and can be fully recycled in a Circular Economy approach.

DFT Modeling of Organocatalytic Ring-Opening Polymerization of Cyclic Esters: A Crucial Role of Proton Exchange and Hydrogen Bonding

Organocatalysis is highly efficient in the ring-opening polymerization (ROP) of cyclic esters. A variety of initiators broaden the areas of organocatalysis in polymerization of different monomers, such as lactones, cyclic carbonates, lactides or gycolides, ethylene phosphates and phosphonates, and others. The mechanisms of organocatalytic ROP are at least as diverse as the mechanisms of coordination ROP; the study of these mechanisms is critical in ensuring the polymer compositions and architectures. The use of density functional theory (DFT) methods for comparative modeling and visualization of organocatalytic ROP pathways, in line with experimental proof of the structures of the reaction intermediates, make it possible to establish these mechanisms. In the present review, which continues and complements our recent manuscript that focused on DFT modeling of coordination ROP, we summarized the results of DFT modeling of organocatalytic ROP of cyclic esters and some related organocatalytic processes, such as polyester transesterification.

Coordination Ring-Opening Polymerization of Cyclic Esters: A Critical Overview of DFT Modeling and Visualization of the Reaction Mechanisms

Ring-opening polymerization (ROP) of cyclic esters (lactones, lactides, cyclic carbonates and phosphates) is an effective tool to synthesize biocompatible and biodegradable polymers. Metal complexes effectively catalyze ROP, a remarkable diversity of the ROP mechanisms prompted the use of density functional theory (DFT) methods for simulation and visualization of the ROP pathways. Optimization of the molecular structures of the key reaction intermediates and transition states has allowed to explain the values of catalytic activities and stereocontrol events. DFT computation data sets might be viewed as a sound basis for the design of novel ROP catalysts and cyclic substrates, for the creation of new types of homo- and copolymers with promising properties. In this review, we summarized the results of DFT modeling of coordination ROP of cyclic esters. The importance to understand the difference between initiation and propagation stages, to consider the possibility of polymer-catalyst coordination, to figure out the key transition states, and other aspects of DFT simulation and visualization of ROP have been also discussed in our review.

Enzymatic polymerization to polyesters in nonaqueous solvents

Aliphatic polyesters are thermoplastic and biodegradable polymers with promising potentials to substitute synthetic polymers derived from petrochemicals. In particular, polylactides (PLAs) and other polylactones can be renewable and biocompatible. A more benign approach for polyester synthesis is the enzymatic polycondensation or ring-opening polymerization (ROP) reactions, whose outcomes largely depend on the reaction conditions including solvents, water content and temperature. This chapter illustrates several examples of enzymatic polymerization to polyesters using various solvents (i.e., organic solvents, supercritical fluids, ionic liquids, and aqueous biphasic systems). Hydrophobic solvents containing little water tend to promote the enzymatic polymerization and lead to high molecular masses of polyesters. Since some enzymatic polymerization reactions are performed at high temperatures (such as ring-opening polymerization of lactide at >100°C), these processes demand solvents with high boiling points (such as many ionic liquids). Supercritical fluids (such as supercritical CO₂) can be "green" solvents, but their compatibility with enzymes and their practicability of scaling up remain as challenges. On the other hand, ionic liquids can be tailored to be compatible with enzymes and to have high thermal stability although the studies of their uses in enzymatic polycondensation and ROP reactions are still at an early stage.

Fast, selective and metal-free ring-opening polymerization to synthesize polycarbonate/polyester copolymers with high incorporation of ethylene carbonate using an organocatalytic phosphazene base

Polycarbonate/polyester copolymers with high incorporation of EC were realized by a fast and selective process using a metal-free catalyst.

Synthesis of a well-defined alternating copolymer of 1,1-diphenylethylene and tert-butyldimethylsilyloxymethyl substituted styrene by anionic copolymerization: toward tailored graft copolymers with controlled side chain densities

Well-defined alternating copolymers comprising 1,1-diphenylethylene (DPE) and styrene derivative having sterically bulky tert-butyldimethylsilyloxymethyl group at the meta position (St-TBS) were successfully synthesized.

Aziridine-based polyaddition, post-modification, and crosslinking: can aziridine rival epoxide in polymer chemistry?

Aziridine may help to solve the problems encountered in epoxide-based polymer technologies. This review focuses on recent achievements in aziridine-based polyaddition, post-modification, and cross-linking.

Synthesis, microstructure and mechanical properties of partially biobased biodegradable poly(ethylene brassylate-co-ε-caprolactone) copolyesters

High-molecular-weight poly(ethylene brassylate-co-ε-caprolactone) copolyesters within a wide composition range were prepared via triphenyl bismuth catalyzed copolymerization of ethylene brassylate (EB) and ε-caprolactone (ε-CL) in bulk. Microstructural analysis of the resulting copolyesters demonstrated that the comonomer units were completely random distribution. DSC and WAXD recognized that the copolyesters cocrystallize within the lattices analogous to either of the parent homopolymers. It confirmed the isodimorphism behavior with a pseudo-eutectic point of melting temperatures as well as lattice spacings at 75 mol% ε-CL units. The crystal cell would be stretched in one dimension rather than expanding in both dimensions with the incorporation of comonomer units according to the result of WAXD. The mechanical properties of the copolyesters are well tunable by the composition, and its trend is consistent with the isodimorphism behavior, in particular, the maximum elongation at break over 2000% is located at the pseudo-eutectic point. The intralamellar shear occurred at the low tensile rate while both intralamellar shear and interlamellar shear occurred at high tensile rate. The copolymers exhibit excellent hydrolytic stability.

Enzymatic Ring-Opening Polymerization (ROP) of Polylactones: Roles of Non-Aqueous Solvents

Aliphatic polyesters such as polylactides (PLAs) and other polylactones are thermoplastic, renewable and biocompatible polymers with high potentials to replace petro-chemical-based synthetic polymers. A benign route for synthesizing these polyesters is through the enzyme-catalyzed ring-opening polymerization (ROP) reaction; this type of enzymatic process is very sensitive to reaction conditions such as solvents, water content and temperature. This review systematically discusses the crucial roles of different solvents (such as solvent-free or in bulk, organic solvents, supercritical fluids, ionic liquids, and aqueous biphasic systems) on the degree of polymerization and polydispersity. In general, many studies suggest that hydrophobic organic solvents with minimum water contents lead to efficient enzymatic polymerization and subsequently high molecular weights of polyesters; the selection of solvents is also limited by the reaction temperature, e.g. the ROP of lactide is often conducted at above 100 °C, therefore, the solvent typically needs to have its boiling point above this temperature. The use of supercritical fluids could be limited by its scaling-up potential, while ionic liquids have exhibited many advantages include their low-volatility, high thermal stability, controllable enzyme-compatibility, and a wide range of choices. However, the fundamental and mechanistic understanding of the specific roles of ionic liquids in enzymatic ROP reactions is still lacking. Furthermore, the lipase specificity towards l- and d-lactide is also surveyed, followed by the discussion of engineered lipases with improved enantioselectivity and thermal stability. In addition, the preparation of polyester-derived materials such as polyester-grafted cellulose by the enzymatic ROP method is briefly reviewed.

Fully alternating and regioselective ring-opening copolymerization of phthalic anhydride with epoxides using highly active metal-free Lewis pairs as a catalyst

Cooperative metal-free Lewis pairs effectively catalysed controlled ring-opening copolymerization of phthalic anhydride (PA) with epoxides.

ROS-responsive poly(ε-caprolactone) with pendent thioether and selenide motifs

Synthesis and oxidation properties of three chalcogen-containing ROS-responsive poly(ε-caprolactone)s have been reported.

Poly(delta-gluconolactone) and Poly(delta-gluconolactone-ε-caprolactone) from delta-Gluconolactone and ε-Caprolactone by Ring-Opening Polymerization

Poly(delta-gluconolactone) (PGL) and poly(delta-gluconolactone-ε-caprolactone) (P(GL-CL)) were synthesized through ring-opening polymerization (ROP) and characterized by FT-IR, NMR, XRD, intrinsic viscosity, GPC, DSC, and TGA. The crystallinity of P(GL-CL) with various d-GL/CL ratios (d-GL/CL = 5 : 5, 4 : 6, 3 : 7, 2 : 8, and 1 : 9) was 12.09 to 59.78% while PGL was amorphous. Melting temperature (Tm) of these polymers was 49.8 to 62.0°C and decomposition temperature was 282 to 489°C depending on the d-GL/CL ratios. In addition, all these polymers were degradable and the degradation rates could be controlled by adjusting d-GL/CL ratios. These results indicated that PGL and P(GL-CL) might be promising novel absorbable materials.

Anionic Polymerization of Styrene and 1,3-Butadiene in the Presence of Phosphazene Superbases

The anionic polymerization of styrene and 1,3-butadiene in the presence of phosphazene bases (t-BuP₄, t-BuP₂ and t-BuP₁), in benzene at room temperature, was studied. When t-BuP₁ was used, the polymerization proceeded in a controlled manner, whereas the obtained homopolymers exhibited the desired molecular weights and narrow polydispersity (Ð < 1.05). In the case of t-BuP₂, homopolymers with higher than the theoretical molecular weights and relatively low polydispersity were obtained. On the other hand, in the presence of t-BuP₄, the polymerization of styrene was uncontrolled due to the high reactivity of the formed carbanion. The kinetic studies from the polymerization of both monomers showed that the reaction rate follows the order of [t-BuP₄]/[sec-BuLi] >>> [t-BuP₂]/[sec-BuLi] >> [t-BuP₁]/[sec-BuLi] > sec-BuLi. Furthermore, the addition of t-BuP₂ and t-BuP₁ prior the polymerization of 1,3-butadiene allowed the synthesis of polybutadiene with a high 1,2-microstructure (~45 wt %), due to the delocalization of the negative charge. Finally, the one pot synthesis of well-defined polyester-based copolymers [PS-b-PCL and PS-b-PLLA, PS: Polystyrene, PCL: Poly(ε-caprolactone) and PLLA: Poly(L-lactide)], with predictable molecular weights and a narrow molecular weight distribution (Ð < 1.2), was achieved by sequential copolymerization in the presence of t-BuP₂ and t-BuP₁.

Self-Buffering Organocatalysis Tailoring Alternating Polyester

A major success has been made on organocatalytic ring-opening alternating copolymerization (ROAP) of phthalic anhydride and ethylene oxide (EO) by use of a simple phosphazene base (t-BuP₁). Polyesters with perfectly alternating sequence distribution, controlled molar masses, and low dispersities (Đ_M < 1.1) are obtained. The ROAP exhibited a distinct living nature so that block, nonlinear, end-functional structures and postpolymerization modification of the alternating polyesters are readily achieved. Solvent, excess EO, and catalyst can be effortlessly recovered and reused. The ideally suitable basicity of t-BuP₁ is considered crucial for the high selectivity and neatness of the ROAP, which engenders a self-buffering mechanism rendering the carboxy and hydroxy terminals appropriately active to allow chain growth in an strictly alternating manner and complete avoidance of side reactions (epoxide self-propagation, transesterification) even at full conversion of the anhydride.